Post on 13-Jul-2015
www.trenchcutter.com
Welcome to Diaphragm Wall / Trench Cutter Division.
27 years In the business… truly worldwide exposure…
We specialize in new and / or expanding existing diaphragm wall division within foundation companies, bringing together technology and people with
ease and focus. Working hands on with this equipment dates back to the late 1980’s when bauer first brought over to the UK their (City Cutter) to
work in a joint venture with Bachy UK.
Since that time experience and invaluable knowledge has been gained working all around the world on many job site with this equipment at the
heart of each project.
Who are
we?
From various extension to the MRT in singapore which is happening o a regular basis to india 1st Cut Off Wall in Dhauliganga, Himalayas, from
basement construction for the cosmopolitan Hotel Casino in Las Vegas to similar projects in Moscow City Centre, This is list is extensive and long…
http://www.layne.com/en/projects/cosmopolitan-resort-and-casino.aspx
http://www.bauerdamcontractors.com/en/baueronlargedamsworldwide/new_dams/dhauliganga_dam/
D-WALL TRENCH CUTTING & CUTTER SOIL MIXING (CSM)STANDARD BAUER RANGE
Due to our Teeth being produced with outstanding Tungsten carbide quality, we canpromise exceptional resistance to wear and with the efficiency that results, leads to
minimum down time.Our soldering process means that the fusion between our tungsten and the tooth body
results in an exceptional Tooth performance. Secure setting in the tooth holder againalso reduces down time.
The teeth are easily and quickly changed with a single locator pin mechanism. Thedesign of our Tungsten carbide tips are designed to protect the tooth holder and
cutter wheel from un-necessary wear.
www.trenchcutter.com
TRENCH CUTTER WHEELS
STANDARD STYLE
SB38JMK
D-WALL TRENCH CUTTING &
CUTTER SOIL MIXING (CSM)STANDARD BAUER RANGE
www.trenchcutter.com
TRENCH CUTTER WHEELS
STANDARD STYLE
SB42JL
D-WALL TRENCH CUTTING &
CUTTER SOIL MIXING (CSM)STANDARD BAUER RANGE
www.trenchcutter.com
TRENCH CUTTER WHEELS
STANDARD STYLE
SB42JR
D-WALL TRENCH CUTTING &
CUTTER SOIL MIXING (CSM)STANDARD BAUER RANGE
www.trenchcutter.com
TRENCH CUTTER WHEELS
STANDARD STYLE
SB38JM
D-WALL TRENCH CUTTING &
CUTTER SOIL MIXING (CSM)STANDARD BAUER RANGE
D-WALL TRENCH CUTTING
ROUND SHANK CHISEL (RSC)Due to the ever increasing demands of modern jobsites, there is a need to pay special
attention to areas of the equipment that are under severe loads, day in day out.Taking this into account and to compliment our excellent series of heavy duty Round
Shank Chisel Teeth, we offer a variety of holders.These are available with or with out the tungsten reinforment and with or with out the
bushing, primarily this is to allow the opportunity to have a combination of cost effectivemanagement due to the different ground conditions, but without lacking the optimum
performance which is demanded.Due to the highly advanced design, the inserted tungsten carbide tips are placed in
such a manner, that they are at the point of maximum abrasion.
www.trenchcutter.com
FULL FACE (ROCK) CUTTER WHEELS
STANDARD STYLE
C 403 22*35 BU-Ø 59
367490
D-WALL TRENCH
CUTTINGROUND SHANK CHISEL (RSC)
www.trenchcutter.com
TS5
D-WALL TRENCH
CUTTINGROUND SHANK CHISEL (RSC)
Casagrande Hydromill
Contact Us
VIBRO EQUIPMENT & PARTS
FAR EAST CO.Address :Unit 1, No. 78, Aim High AvenueGateway Park Industrial Phase 1,Subic Bay Freeport Zone,Philippines, 2222
Tel # : +63 (0)47 250 2802Fax # : +63 (0)47 250 2804
E Mail : info@vibro-equipmentfareast.comSkype :vibro-equipmentfareast
www.trenchcutter.com