Post on 01-Jan-2017
2
MIXOMAT CTilting drum blender for 100 to 400 l containers
GENERAL REMARKS
· MIXOMAT C type drum blenders are available in two electrically tilting versions:
MIXOMAT C-SE: Economic version with tilting housing, suitable for most applications. This version isn’t suitable for clean-room applications. Double-sided version also available.
MIXOMAT C-HE: High-End version for clean rooms or for highest possible performance with tilting sealed shaft and closed housing.
Only one-sided Version possible.
· Standard containers of 100 to 400 litres available (with type C-HE 150 to 400 litres)
ELECTRICALLy TILTING C-SE TypE MIXOMAT
Execution· Stove enamelled steel standard housing (RAL 6017) or stainless steel St.1.4301 (ground finish, grain size 320)· Shaft with ball-bearings, sealed bearing housing· With chain transmission· Available as one- or double-sided blender· Version mounted on wheels available (C-SE1 and C-SE2)· ATEX version available for zone 2/22 or 1/21· PLC control with integrated 4” color-touch-screen· Controller languages: English, German, French, Spanish and Dutch
Sizes as follows:
Type Container (litres) power [kW] Max. working load [kg]
Art.-numberlacquered
Art. numberstainless steel
C-SE1 100 0,55 100 kg M-CSE1-0400 M-CSE1-0450
C-SE2 > 100 – 200 0,75 200 kg M-CSE2-0400 M-CSE2-0450
C-SE3 > 200 – 400 1,5 400 kg M-CSE3-0400 M-CSE3-0450
MIXOMAT C-SE, position „up“
MIXOMAT C-SE, position „down“
3
MIXOMAT CTilting drum blender for 100 to 400 l containers
C-SE type MIXOMAT blender with second holder, position „up“
The blender may also be fitted with a second holder. Being only tiltable on one side, the second holder should rather be used for containers with a maximum capacity of 25 litres.
Double-sided type C-SE MIXOMAT blenders
C-SE type MIXOMAT blender with second holder, position „down“
4
MIXOMAT CTilting drum blender for 100 to 400 l containers
Execution· Stove enamelled steel standard housing (RAL 6017) or stainless steel St.1.4301 (ground finish, grain size 320)· Shaft with ball-bearings, sealed bearing housing· Drive with worm geared motor· Electrical vertical movement with linear drive· ATEX version available for zone 2/22 or 1/21· Version mounted on wheels available (C-HE2)· PLC control with integrated 7” color-touch-screen· Controller languages: English, German, French, Spanish and Dutch, others on request.
Sizes as follows:
ELECTRICALLy TILTING C-HE TypE MIXOMAT
C-HE type MIXOMAT blender, position „up“
C-HE type MIXOMAT blender, position „down“
Type Container (litres) power [kW]
Max. working load [kg]
Art.-numberlacquered
Art. numberstainless steel
C-HE2 > 150 – 200 1,1 200 M-C-HE2-0400 M-C-HE2-0450
C-HE3 > 200 – 400 2,2 400 M-C-HE3-0400 M-C-HE3-0450
5
MIXOMAT CTilting drum blender for 100 to 400 l containers
WHEEL MOuNTING
Swivelling roller Levelling foot
Size 1 and 2 MIXOMAT blenders can also be supplied on wheels. They are placed on an underframe fitted with levelling feet or rollers with brakes (2 fixed and 2 swivelling).
Housing Execution Art. number
C-SE1 Lacquered steel M-C1-2040
C-SE1 Stainless steel M-C1-2042
C-SE2/C-HE2 Lacquered steel M-C2-2040
C-SE2/C-HE2 Stainless steel M-C2-2042
Following standard executions are available:
6
MIXOMAT CTilting drum blender for 100 to 400 l containers
SpK type spanset belt holder
Following standard container holders are available:
HRK type half collar holder
Very easy to use holder. Safe holding is guaranteed by one quick-action clamping fastener with a special safety lock-ing system preventing any undesired opening of the fastener.Following standard container sizes are available:
V [l] D [mm] H [mm] Type Art. numbergalvanised
Art. numberstainless steel
100 450 665 HRK 100 M-C-0365 M-C-0366
150 560 665 HRK 150 M-C-0371 M-C-0372
200 560 870 HRK 200 M-C-0374 M-C-0375
300 770 799 HRK 300 M-C-0380 M-C-0381
400 770 997 HRK 400 M-C-0383 M-C-0384
The container is held on the holder by means of two spanset belts. This very price worthy holder is used when only a few daily or weekly blendings have to be carried out. The spanset belts allow a great amount of drum diameter (- 100 mm) and height (+ 30/ - 10 mm) tolerances. They have been specially developed for the type of holder and are very easy to use. Spanset belts are available for the following container sizes:
V [l] D [mm] H [mm] Type Art. numbergalvanised
Art. numberstainless steel
100 450 665 SP 100 M-C-0565 M-C-0566
150 560 665 SP 150 M-C-0571 M-C-0572
200 560 870 SP 200 M-C-0574 M-C-0575
CONTAINER HOLDERS fOR C-SE AND C-HE MIXOMAT bLENDERS
Closed type holder
Open type holder
7
MIXOMAT CTilting drum blender for 100 to 400 l containers
bV type holder (opposite side)
BV type container holders available as a standard for following container sizes:
V [l] D [mm] H [mm] Type Art. numbergalvanised
Art. numberstainless steell
3 * 200 175 BV 3 M-A-0253 M-A-0254
5 180 200 BV 5 M-A-0256 M-A-0257
6 * 200 270 BV 6 M-A-0259 M-A-0260
10 250 270 BV 10 M-A-0262 M-A-0263
14 * 275 330 BV 14 M-A-0265 M-A-0266
20 315 280 BV 20 M-A-0268 M-A-0269
25 315 330 BV 25 M-A-0271 M-A-0272
*) Plastic drums
Container placed on the holder base. Hose clamp simply swung down onto the holder and clamped with the quick-action clamping fastener. Adjustable stamp in the middle of the clamp to press onto the container cover and to fine adjust the container height. Customised container holders available. BV type holders are available in galvanised or stainless steel.
CONTAINERSFollowing standard fuCHS containers are available:
Stainless steel containers
200-litre drum
Execution: · Stainless steel St.1.4301, bright as rolled finish
Option: · Stainless steel St.1.4435, electrolytic polished, seal welded handles
Delivery: · Drum, cover, tension ring, silicon seal, optional baffle fixed under the cover (electrolytic polish for faster and better blending
8
MIXOMAT CTilting drum blender for 100 to 400 l containers
Container sizes:
V [l] D [mm] H [mm] Art. number1.4301
Art. number1.4435
100 450 665 M-B-0015 M-B-0017
150 560 665 M-B-0020 M-B-0022
200 560 870 M-B-0025 M-B-0027
300 770 799 M-B-0030 M-B-0032
400 770 997 M-B-0035 M-B-0037
bAffLE
for container V [l]
Art. number1.4301
Art. number1.4435
100 M-B-0082 M-B-0083
150, 200 M-B-0084 M-B-0085
200, 400 M-B-0086 M-B-0086
Basically it is possible to install on the same drum holder drums of the same or smaller diameter. Therefore we pro-pose an adapting system. It consists on a construction mainly manufactured from polypropylene and can be clipped easily on the holder.
ADApTER TypE AD-HRK fOR SMALLER DRuMS TO bE INSTALLED ON STANDARD HOLDERS
9
MIXOMAT CTilting drum blender for 100 to 400 l containers
HolderHRK
Container[l]
Type HRK
Art. number. HRK
100 90 AD100/90HRK M-B-1830
100 60 AD100/60HRK M-B-1834
100 50 AD100/50HRK M-B-1838
100 30 AD100/30HRK M-B-1842
120 100 AD120/100HRK M-B-1846
120 90 AD120/90HRK M-B-1850
120 60 AD120/60HRK M-B-1854
120 50 AD120/50HRK M-B-1858
120 30 AD120/30HRK M-B-1862
150 100 AD150/100HRK M-B-1866
150 90 AD150/90HRK M-B-1870
150 60 AD150/60HRK M-B-1874
150 50 AD150/50HRK M-B-1878
150 30 AD150/30HRK M-B-1882
200 120 AD200/120HRK M-B-1890
200 100 AD200/100HRK M-B-1894
200 90 AD200/90HRK M-B-1898
200 60 AD200/60HRK M-B-1902
200 50 AD200/50HRK M-B-1906
200 30 AD200/30HRK M-B-1910
220 200 AD220/200HRK M-B-1914
220 150 AD220/150HRK M-B-1918
220 120 AD220/120HRK M-B-1922
220 100 AD220/100HRK M-B-1926
220 90 AD220/90HRK M-B-1930
220 60 AD220/60HRK M-B-1934
220 30 AD220/30HRK M-B-1938
300 150 AD300/150HRK M-B-1942
300 100 AD300/100HRK M-B-1946
300 90 AD300/90HRK M-B-1950
300 60 AD300/60HRK M-B-1954
300 50 AD300/50HRK M-B-1958
300 30 AD300/30HRK M-B-1962
400 200 AD400/200HRK M-B-1970
400 150 AD400/150HRK M-B-1974
400 120 AD400/120HRK M-B-1978
400 100 AD400/100HRK M-B-1982
400 90 AD400/90HRK M-B-1986
400 60 AD400/60HRK M-B-1990
400 50 AD400/50HRK M-B-1994
400 30 AD400/30HRK M-B-1998
Adapter sizes
10
MIXOMAT CTilting drum blender for 100 to 400 l containers
C-SE AND C-HE TypE MIXOMAT SAfETy DEVICES
To prevent accidents fuCHS advises its customers to install safety devices such as metal or photoelectric barriers equipped with safety switches to be connected to the control unit or to a similar device fitted with safety switches connected to the control unit by means of two terminals (only one being used with one-sided blenders).
Protection cages may also be supplied by FUCHS.
Features of standard executions for stationary units:
· Access to blending containers through two swing doors· Magnetic safety limit switch· Easy to install· PMMA plankings
Safety cages for C-SE and C-HE type MIXOMAT blenders (stationary execution)
Following standard executions are available:
Housing frame Dimensions [mm] Type Art. number
C-SE1 Steel 880x1280x2030 SB1CS M-B1-0110
C-SE1 Stainless Steel 880x1280x2030 SB1SS M-B1-0115
C-SE2/C-HE2 Steel 1030x1560x2030 SB2CS M-B2-0110
C-SE2/C-HE2 Stainless Steel 1030x1560x2030 SB2SS M-B2-0115
C-SE3/C-HE3 Steel 1230x1630x2030 SB3CS M-B3-0110
C-SE3/C-HE3 Stainless Steel 1230x1630x2030 SB3SS M-B3-0115
11
MIXOMAT CTilting drum blender for 100 to 400 l containers
Tilting, open „down“
Tilting, open
Tilting, closed
Tilting protection cage for C-SE and C-HE type MIXOMAT blenders (mobile execution)
Features of standard executions for mobile units:
· Access to blending containers through two swing doors· Magnetic safety limit switch· Compact execution · Easy opening and closing thanks to gas spring support· PMMA plankings
Housing frame for containers up to Type Art. number
C-SE1 Steel 50 l SMB1CS M-B1-0120
C-SE1 Stainless Steel 50 l SMB1SS M-B1-0125
C-SE1 Steel 120 l SMB1CS M-B1-0130
C-SE1 Stainless Steel 120 l SMB1SS M-B1-0135
C-SE2/C-HE2 Steel 220 l SMB2SS M-B2-0120
C-SE2/C-HE2 Stainless Steel 220 l SMB2SS M-B2-0125
Following standard executions are available:
12
MIXOMAT CTilting drum blender for 100 to 400 l containers
Double-side protection for C-SE type MIXOMAT
Features of standard executions for stationary units:
· Access to blending containers through two swing doors· Magnetic safety limit switch· Easy to install· PMMA plankings
Housing frame Type Art. number
C-SE1 Steel S2B1CS M-B1-0310
C-SE1 Stainless Steel S2B1SS M-B1-0315
C-SE2/C-HE2 Steel S2B2CS M-B2-0310
C-SE2/C-HE2 Stainless Steel S2B2SS M-B2-0315
C-SE3/C-HE3 Steel S2B3CS M-B3-0310
C-SE3/C-HE3 Stainless Steel S2B3SS M-B3-0315
Following standard executions are available:
fuCHS Maschinen AG Englisberg 17 CH-1763 Granges-Paccot, Schweiz
Telefon +41 26 510 10 00 Fax +41 26 510 10 09 info@fuchsag.com
www.fuchsag.com Sta
nd:
2015-0
6-0
2