Post on 08-Feb-2018
PTFE micro-powder additives improve properties in the following application:
INKS ( Lithographic, gravure and flexographic inks, toners )
• Slip and rub resistance• Blocking resistant• Surface smoothness and gloss• Low coefficient of friction• Improve the corrosion inhibition• Thermal and rub resistance, low friction (Toners application)
THERMOPLASTICS
• Wear resistance• Low coefficent of friction• Deformation resistent• Anti-dripping • Mould release
ELASTOMERS
• Enhance tear resistance at elevate temperature• Increase mould release • Low surface energy• Low coefficient of friction• Abrasion resistance• Anti-dripping • Non-stick
COATINGS
• Wear resistance• Low coefficient of friction• Abrasion resistance• Low surface energy• Moisture repellency• Low flammability, matting, texturing• Slip and rub resistance• Blocking resistance• Moisture resistance• Surface modifier and gloss matting
LUBRICANTS
• Thickening efficiency• Lubricity• Corrosion resistance• Electrical properties• Low coefficient of friction• Thermal resistance, high and low temperature lubricity• Spray mould release
PTFEMICROPOWDER
FLUOROADDITIVES
PTFE MICROPOWDERFLUOROADDITIVES
THE FLUOROCHEMICALSSPECIALIST
Guarniflon S.p.A.Maflon Division
Via T.Tasso 12 - 24060 Castelli Calepio (BG) - ITPhone +39.035.4494311
Fax +39.035.4494331www.maflon.com - info@maflon.com
Bulk DensityASTM D4894
g/l
Melting PointASTM D4591
°C
Colour Particle sizedistribution
at 50 % micron(µm)
Food approvalFDA (USA)
Moisture content% b.w.(23 °C)
Specific SurfaceASTM D4567Area (m²/g)
MELT FLOW INDEX ASTM
D1238 g/10 min.PLASTIC ELASTOMER COATINGS
POWDER COATING INKS LUBRICATION
LINEPLUS PF 150-P 260-360 330-335 white 3,0 ± 2 yes <0,1 9 0,3 • • • •LINEPLUS PF 155-P 250-400 330-335 white 3,0 ± 2 no <0,1 9 12 • • • •LINEPLUS PF 160-P 250-400 330-335 white 10 ± 2 yes <0,1 9 0,3 • •LINEPLUS PF 800-P 350-560 338-348 white 400-500 yes 0,02 9 / • •LINEPLUS PF 100 350-400 327-342 white 2 ± 1 no <0,1 7 / • •LINEPLUS PF 200 300-450 327-342 white 3,0 ± 1,5 no <0,1 3 1,5 • •LINEPLUS PF 208 300-450 317-332 white 3,0 ± 1,5 no <0,1 3 11 • • •LINEPLUS PF 701 250-400 320-340 white 3,0 ± 2 no 0,02 3 10 •LINEPLUS PF 250 280-450 327-342 white 5,0 ± 2 no <0,1 3 1,5 • • •LINEPLUS PF 250-F 280-450 327-342 white 5,0 ± 2 yes <0,1 3 0,1 • • •LINEPLUS PF 250-R 400-500 317-332 white 5,0 ± 2 no 0,02 1,8 11 • •LINEPLUS PF 255 300-400 327-342 white 5,0 ± 2 no <0,1 3 6 • •LINEPLUS PF 260 350-500 317-332 white 5,0 ± 2 no <0,1 3 11 • •LINEPLUS PF 300 300-450 327-342 white 10 ± 2 no <0,1 3 1,5 •LINEPLUS PF 300 F 280-450 327-342 white 10 ± 2 yes <0,1 3 0,1 •LINEPLUS PF 350 300-450 327-342 white 15 ± 2 no <0,1 3 1,5 •LINEPLUS PF 350-R 350-500 327-342 white 15 ± 2 no <0,1 3 2 • • •LINEPLUS PF 352-R 350-500 327-342 white 15 ± 2 no <0,1 3 0,1 • •LINEPLUS PF 450-F 250-350 330-335 white 15 ± 5 yes <0,1 3 0,1 • •LINEPLUS PF 600 280-450 327-342 white 20 ± 2 no <0,1 3 1,5 •LINEPLUS PF 625-F 390-460 338-348 white 22 ± 3 yes <0,1 / / • • •LINEPLUS PF 630-F 580-730 338-348 white 665 ± 85 yes <0,1 / / •LINEPLUS PF 650-F 300-450 327-342 white 20 ± 2 yes <0,1 3 0,1 •LINEPLUS PF 700 390-500 327-342 white 30 ± 3 no 0,3 / / •LINEPLUS PF 750-R 400-600 326-332 white 30 ± 10 no <0,1 3 1,5 • •
Lineplus PF are a micronized PTFE additives designed to enhance the wear resistance and lubricity of a variety of materials.
• Low molecular weight PTFE produced by thermal degradation• Rigid particle morphology• Improved non-stick properties• Reduced coefficient of friction• Reduced surface tension• Increase wear resistance of matrix material
• PTFE micropowders can be used as additives in many different applications and at concentration typical from 5 to 20 %• Printing inks• Paint and coatings• Thermoplastic• Grease and lubricants• Plastic and elastomeric
PTFEMICROPOWDERFLUOROADDITIVES
PRODUCTS
THERMOPLASTICS
COATINGS
ELASTOMERS
INKS
LUBRICANTS
APPLICATION AREA