Post on 28-Feb-2021
Thermoplastic Water Heaters & Storage TanksAvailable in 55, 80, and 119 Gallon Capacities
Energy Kinetics Combines Exceptional Performance with High Efficiency
High Flow thermoplastic tanks by Energy Kinetics represent the latest in water heater and storage tank innovation, continuing Energy Kinetics reputation for dependability and longevity in a lightweight package. With standard top-mount connections and a single bolt stainless steel collar across all models, High Flow tanks ensure a streamlined installation process—whether an indirect water heater or storage tank—while the monolithic vessel construction provides years of worry-free service in residential and commercial applications.
High Flow
Light weight
No anode rod required
Resilient ConstructionLong-life, thermoplastic tank construction Seamless vessel constructionImpervious to water quality variations
FEATURES
Easy to InstallAll plumbing connections are top-mount (on all models)Single bolt stainless steel collar streamlines coil/element access
No required maintenance
Warranty10 year, non-prorated residential warrantyOptional lifetime residential warranty5 year non-prorated commercial warranty
High Accuracy Temperature controls with ThermistorsAdjustable setpoint & differentials
Stainless Steel Tanks
Aggressive water with oxygen attacks liner, depleting antioxidants
Phase 2 Phase 3 Phase 4Phase 1The vessel �lled with water.
Liner ReinforcedOuter Liner
AntioxidantsReplenish AreaWith Shortage
AntioxidantsRebalance
PremiumInsulation
Antioxidants migrate to areas where antioxidants have been depleted
*Please note that this cycle as depicted above is continuous and takes place over several decades.
Water
How does the High Flow tank interact with waterThe two bonded layers of the High Flow tank continuously replenish and rebalance antioxidant levels throughout the vessel over several decades of service.
� Chlorides in domestic water can compromise construction� Welds represent structural weak points� Expensive to produce and replace High Flow (thermoplastic)
� Seamless construction� No anode rod needed� No required maintenance� Immune to water quality variations
� Tolerates higher temperatures and pressures
Stainless Steel Tank
Thermoplastic Vessel
Why High Flow Tanks?The Energy Kinetics High Flow line of water heaters and storage tanks uses proprietary technology to fuse a polybutene inner liner with a polypropylene and fiberglass structural outer layer at the molecular level to create a lightweight, monolithic composite vessel with seamless construction.
Available in 55, 80, and 119 gallon configurations.
Stainless steel flange reinforcements
Fused, monolithic vessel
Support stand
Storage TankTop View* Side View
Piping Diagram
High Flow Controller (ETC101)
Controller (ETC101)
� Temperature accuracy within 2 degrees� Eliminates temperature overshooting� LED displays operating mode
ETC101 ControllerTemperature and Thermistor
A
45.00°45.00°
BB
3/4" NPTWith Heat Trap
1-1/2" NPTOutlet
3/4" NPTWith Dip Tube
1-1/2" NPTWith Dip Tube
*1-1/2" NPT on Model P120CD-EK 3/4" NPT on smaller capacity models.
DIMENSIONS
Model
Overall Dimensions(Inches) Shipping
Weight(Lbs)Height Diameter
P55FLEK 41" 26" 95
P80FLEK 53.5" 26" 125P120FLEK 74" 26" 155
2 Thermistors for Optimal Thermal Purge.1) Uses BLACK Thermistor wire for boilers <150MBH 2) Use RED Thermistor wire for boiler >150MBH
Indirect Tank
DIMENSIONS
INDIRECT TANK PERFORMANCE
Model
Overall Dimensions(Inches) Shipping
Weight(Lbs)
Domestic Water Boiler Water Supply/Return
(Indirect TankHeating Coil)
T&P Relief ValveCold Water
InletHot Water
OutletHeight Diameter
P55FL 41" 26" 90 3/4" MNPT 3/4" FNPT 3/4" MNPT 3/4" FNPT
P80FL 53.5" 26" 118 3/4" MNPT 3/4" FNPT 3/4" MNPT 3/4" FNPTP120FL 74" 26" 145 1 1/2" MNPT 1 1/2" FNPT 1" MNPT 3/4" FNPT
ModelFirst Hour
RatingBoiler Output
(6 GPM @ 200°F) Boiler Water Continuous Flow
135°F BTU/HR Flow Rate (GPM) Head Loss (ft. w.c.)P55FL 212 145,000 8 GPM 18.7P80FL 300 128,000 8 GPM 18.7P120FL 478 243,000 14 GPM 20
Top View Side View
45.00°
Cold In
HX InHot Out
HX Out FRONT
Unique Cold Water Diffuser
Field Removable Heat Exchanger(Top Mount)
ETC101 ControllerTemperature and Thermistor
Indirect Tank
Piping Diagram
High Flow Controller (ETC101)
Controller (ETC101)
� Temperature accuracy within 2 degrees� Eliminates temperature overshooting� LED displays operating mode
ETC101 ControllerTemperature and Thermistor
P: (908) 735-2066www.energykinetics.com
51 Molasses Hill Road Lebanon, NJ 08833 MADE IN USA