Post on 26-Jul-2020
Universal Plug-n-Play Sensors and Online Systems for:
- pH & ORP- Conductivity & Resistivity- Toroidal Conductivity- Dissolved Oxygen- Free Chlorine & Dissolved Ozone- Turbidity & Suspended Solids
Direct Network Connections orConventional Analyzer Systems
Thermo Scientific AquaSensorsLiquid Analytical Measurement Systems
Thermo Scientific AquaSensors / DataStick Measurement System / www.thermoscientific.com/water2
Thermo Scientific AquaSensors products are innovative liquid analytical measurement systems for water quality and process control applications. Unique product designs reduce equipment and installation costs while improving reliability.
Thinking Outside the BoxThermo Scientific AquaSensors DataStick™ Measurement Systems began with a revolutionary idea – Simplify analytical measurements by designing digital sensors that connect directly to PLC’s, HMI’s and PC-based SCADA systems. The patented DataStick measurement system features pre-calibrated, plug-in sensor heads that provide 24-bit data and can be calibrated, configured or diagnosed directly from a PLC or computer system.
This evolution in analytical measurement is available in a complete line of true plug-n-play modular sensor configurations for the measurement of pH, ORP (Redox), contacting and toroidal conductivity, resistivity, dissolved oxygen, drinking water turbidity, high level turbidity, suspended solids, dissolved ozone and free chlorine.
DataStick Means Integral CommunicationsThe modular DataStick provides unparalleled flexibility. Configure a communication protocol and measurement parameter by simply connecting the appropriate sensor head and communication module. A wide variety of integrated network protocols are supported directly from the DataStick measurement system including Ethernet/IP, Modbus TCP, TCP/IP, Modbus RTU, DeviceNet, CANopen, Profibus DPV0/DPV1, USB and RS232.
The DataStick consumes very little power and can be used in portable applications with USB connections to laptop computers. Multiple DataSticks can be accessed directly using a standard web browser, terminal program, AquaComm for Windows, or PLC programs.
Thermo Scientific AquaSensors
Local Display & Control…and Conventional SolutionsFor local display and calibration of any DataStick system, the low cost AV38 should be used. It supports multiple DataSticks and provides current outputs for traditional data reporting and PID control. Relays are provided for alarm, control or wash functions. A variety of communication protocols are available for remote display, calibration and configuration of DataStick measurement systems.
The AnalogPlus line of analytical measurement systems features traditional cabled sensors with improved reliability and accuracy. All AnalogPlus sensors can be used with the AV88 universal analyzer, as well as other compatible industrial analyzers.
Made in the USA; CE and UL approvals
Water Analysis InstrumentsHeadquarters, Beverly, MA
Thermo Scientific AquaSensors / DataStick Measurement System / www.thermoscientific.com/water 3
Thermo Scientific DataStick™ Measuring System
Universal Plug-N-Play Sensors
The Thermo Scientific DataStick is a versatile, configurable analytical measurement system. By mixing and matching interchangeable plug-n-play components, the DataStick can be tailored for many water quality and process control applications. It can
Key AquaSensors DataStick ApplicationsDrinking Water Treatment
Wastewater Treatment
Industrial Water Treatment
Measurement Parameter Recommended DataStick Product
• • • pH/ORP Thermo Scientific Differential pH/ORP Measurement System
• • Conductivity/Resistivity Thermo Scientific Conductivity/Resistivity Measurement System
• • Total Dissolved Solids (TDS) Thermo Scientific Toroidal Conductivity Measurement System
• • • Dissolved Ozone Thermo Scientific Ozone Measurement System
• Optical Dissolved Oxygen Thermo Scientific RDO Pro Rugged Optical Dissolved Oxygen Measurement System
• Dissolved Oxygen Thermo Scientific Dissolved Oxygen (ppm) Measurement System
• Dissolved Oxygen Thermo Scientific Dissolved Oxygen (ppb) Measurement System
• • Low-Range Turbidity Thermo Scientific AquaClear Low-Range Turbidimeter
• • • Turbidity Thermo Scientific Wide-Range Turbidity Measurement System
• • Suspended Solids (TSS) Thermo Scientific Suspended Solids (TSS) Measurement System
• • Free Chlorine Thermo Scientific AquaChlor Free Chlorine Analyzer
be remotely configured, calibrated and diagnosed. The DataStick can be configured for a large and growing list of protocols for water quality and process control measurements.
•EthernetIP•ModbusTCP•TCP/IP•CANopen
•Drinkingwaterturbidity•High-rangeturbidity•Suspendedsolids•FreeChlorine
Thermo Scientific AquaSensors / DataStick Measurement System / www.thermoscientific.com/water4
Configuring a Measurement System
There are three steps to specifying a Thermo Scientific AquaSensors DataStick measurement system:
1. Select a preferred communication protocol
2. Choose the body material and mounting requirements for the DataStick sensor
3. Select a measurement parameter and sensor head
1. Communication Protocol Adapter Thermo Scientific AquaSensors
is committed to supporting a wide variety of industrial communication protocols for remote measurement, calibration, configuration and diagnostics. If a protocol of interest is not listed here, others may be considered. Contact factory for details.
2. Universal DataStick Body Choose the preferred material
of construction and process mounting preference:
The DataStick sensor body is designed as a universal module and resembles conventional sensors with 1” NPT process threads for “convertible” immersion or inline mounting. Other special mounts are available.
Communications Adapter Selection MatrixBody Material Communications Cable Length Cable Termination316 stainless steel RS-232 ASCII 10 feet Stripped wiresPEEK® Modbus RTU 30 feet Custom
Modbus RS-232 CustomEthernetDeviceNetProfibus DPUSBCANopen
3. Measurement Sensor Head See page 7 for sensor
configurations for measurement of pH, ORP (Redox), contacting and toroidal conductivity, resistivity, dissolved oxygen, drinking water and high level turbidity, suspended solids, dissolved ozone and free chlorine.
Differential pH Sensor
Universal DataStick Body
Communication Protocol Adapter
DataStick™ Selection MatrixBody Material Mounting316 stainless steel 1 inch NPT front/back
CPVC 1 inch NPT back w/smooth front
PEEK® 2.0 & 2.5 inch Tri-Clamp Custom mounting
Thermo Scientific AquaSensors / DataStick Measurement System / www.thermoscientific.com/water 5
Local Display with Current Outputs and Relays for DataSticks: Thermo Scientific AV38 DisplayThe Thermo Scientific AV38 Display delivers automatic recognition of DataStick sensor type, calibration, configuration and diagnostics. The AV38 will operate with any DataStick regardless of configuration. (See page 6 for more details)
Integrated System Monitoring and Controlling from a Single Location: HMI/PLCUse an HMI (Human Machine Interface)/PLC (Programmable Logic Controller) for indication, calibration, configuration and diagnostics of the entire measurement system from one convenient location.
• Modbus: Modbus RTU register map provides measurement and calibration data in floating point and integer formats – over RS-485 or RS-232 hardware interfaces. Sensor configuration and diagnostics are also accessible.
• DeviceNet: Electronic Data Sheet (EDS) supports all measurements. Easy configuration works with all PLC’s that support DeviceNet.
• Ethernet: Plugs into any Power over Ethernet (PoE) enabled switch or power injector. Accessible with a static IP address with any Web browser and automatically detects any uses Ethernet/IP or Modbus TCP protocols when used with industrial PLC’s.
Additional information is available upon request regarding other communication protocols, including: Profibus, ASCII over RS-232 or CANopen.
Thermo Scientific AV38 Local Display
Direct HMI/PLC Interface
Direct PC/SCADA Connection
Menu-Guided Network Data Reporting: PC/SCADA Choose any PC or SCADA to report data from a network of DataSticks. Thermo Scientific AquaSensors AquaComm™ Software, standard OPC server software, or any terminal software program such as Microsoft HyperTerminal can be used to measure, calibrate, configure and diagnose the entire measurement system form one convenient location. AquaComm is a Windows program that automatically configures itself for each DataStick and directly supports USB, RS-232 and Modbus.
DataSticks can communicate directly with PCs via:
• USB (no external hardware)
• RS-232 (requires DC power)
• CANopen (requires hardware/software)
• Modbus (requires RS-485 hardware)
• DeviceNet (requires hardware/software)
• Profibus (requires hardware/software)
Thermo Scientific AquaSensors / DataStick Measurement System / www.thermoscientific.com/water6
• Allows1or2DataSticksensorinputs for conventional use
• Gatewaymodeallowsviewofmultiple DataSticks in network
• CompatiblewithanyDataStick
• Standard¼DINNEMA4Xwallmount enclosure
• Optional¼and½DINpanelmount and pipe mount
• Sunshieldavailablefor outdoor use
• MeetsCErequirementsfor heavy industrial use
• CarriescULusgeneralelectricalclassification (UL61010-1)
• Menufunctionsincludecalibration,configuration and diagnostics
• PIDcontrollerforpH and conductivity
• Two4to20mAcurrentoutputs
• TwoForm-Crelaysforalarm,control and wash
• Availablein24VDCor100to 240 VAC powered versions
• Digitalhostcommunicationsavailable for interface to PC, SCADA or other control systems
The Thermo Scientific AV38 Display delivers a backlit, high contrast display at a low cost. It provides automatic recognition of DataStick sensor type, calibration, configuration and diagnostics. The AV38 will operate with any DataStick regardless of configuration.
Thermo Scientific DataStick Sensors
DataStick sensor heads are pre-calibrated and can be easily replaced or exchanged in any DataStick measurement system without reinitializing the system. Cost-effective robust designs in a broad range of measurements.
• Pre-calibratedplug-n-play sensor heads
• Rugged,foul-resistantsensorsdesigned for continuous use in the most demanding applications
• Direct24-bitdatareporting
• Plug-n-playindustrialcommunication adapters
• 1inchNPTsensorheadsavailablein a variety of materials
• Engineeringspecifications,mounting hardware and product description available: request individual data sheets
• MeetsCErequirements
AV38 shown with NEMA4Xenclosure
Thermo Scientific AV38 Local Display/Controller
Thermo Scientific AquaSensors / DataStick Measurement System / www.thermoscientific.com/water 7
Sensor Specifications
Differential pH & ORP
Conductivity & Resistivity
Toroidal Conductivity
Dissolved Oxygen
DissolvedOzone
Free Chlorine
Parameter Differential pH & ORP Sensors
Conductivity & Resistivity Sensors
Toroidal Conductivity Sensors
Dissolved Oxygen Sensors
Dissolved Ozone Sensors
Free Chlorine Sensors
Highlight
Differential pH and ORP measurements
Two electrode measurement with 0.01, 0.1 and 1.0 cell constants
Electrodeless conductivity sensor
Polarographic Clark cell
Robust and chemically resistant PEEK construction
Reagent-free chlorine with amperometric measurement
Range
pH: 0 to 14 pHORP: ±2100 mV
Conductivity: 0 to 5000 µS/cmResistivity:0 to 18.2 MΩ•cm
0 to 2 S/cm 0 to 40 ppm 0 to 10 ppm 0 to 10.0 ppm
Resolution
pH: 0.01 pHORP: 0.1 mV
Conductivity: 4.5 sig figsResistivity: 4.5 sig figs
4.5 sig figs 0.01 ppm 0.01 ppm 0.01 ppm
Key Features
Easy to replace/refresh reference junctions and solutions
Accurate temperature compensation
Standard protected tip with integral ground electrode
High performance construction
Accurate temperature compensation
Wide range and high resolution measurement
Ideal for applications with heating and cooling cycles-common in CIP (clean-in-place) and chemical blending
Accurate temperature compensation
Rugged, foul resistant membrane
Easy-to-replace sensor membrane cap
Temperature measurement included
Also available in ppb measurement ranges
Accurate temperature and pressure compensation
Amperometric cell technology
Easy-to-replace sensor membrane cap
Accurate temperature compensation
Optional automatic pH compensation in AquaChlor system
Thermo Scientific AquaSensors / DataStick Measurement System / www.thermoscientific.com/water8
Thermo Scientific DataStick Systems
Thermo Scientific AquaClear™ Low-Range Turbidimeter• Meetsorexceeds
USEPA Method 180.1
• Pre-calibratedmeasurement
• 135mlsamplechamber
• Lowvolumereducescalibrationreagent costs
• 0to200NTUmeasurementrange
• 0.001NTUresolution
• 3yearlightsource
• Compactmountingfootprint
• Localinterfacewithcurrentoutputs and relays
• Singleordualsensorinputdesign
• Lowflowrate
• Temperature measurement included
• Digitalnetworkinterface
• Plug&playindustrialcommunications adapters
Thermo Scientific AquaClear turbidimeter uses a DataStick sensor with a pre-calibrated optical detector. The DataStick sensor is inserted in the sample chamber facilitating the nephelometric design for turbidity measurements.
This compact online turbidimeter meets or exceeds USEPA Method 180.1 requirements for drinking water monitoring. It is designed to perform best in low turbidity ranges typical in stringent membrane filtration applications. The unique sample chamber makes this system easy to calibrate, clean and maintain. The chamber design also removes bubbles from the sample to ensure accurate turbidity measurements. Its low-volume, 135 ml, significantly reduces the amount of Formazin needed for calibration.
The specially designed, low cost tungsten lamp is rated for at least three years without need for replacement and provides improved measurement response time. The close-coupled detector reduces noise and maintains very stable readings without the need for large amounts of digital filtering.
Wide-Range Turbidity Sensors
•Conforms to ISO 7027 for wide range turbidity
•Range: 0 to 4000 NTU Resolution: 0.1 NTU
•90and180degree light paths
•Optionalwashhead to avoid fouling
•Temperature measurement included
Total Suspended Solids Sensors
•Conforms to ISO 7027 for suspended solids
•Range: 0 to 20,000 mg/L Resolution: 1 mg/L
•Optionalwashhead to avoid fouling (pictured)
•Temperature measurement included
Thermo Scientific AquaClear™ Low-Range Turbidimeter
Thermo Scientific AquaSensors / DataStick Measurement System / www.thermoscientific.com/water 9
Thermo Scientific DataStick Systems
Thermo Scientific AquaChlor Free Chlorine Monitoring System Monitor Free Chlorine with amperometric measurement system.
• Turn-key,reagent-freedesign
• EPAcompliantaccordingtoMethod 334.0
• Idealformonitoringfreechlorine in drinking water distribution
• Range:0to10ppm Resolution: 0.01 ppm
• Designedtooperatebetween pH 4.0 and 9.0
• Easy-to-replacesensor membrane cap
• Temperaturecompensated
• Compactmountingfootprint
• Local interface with output and relays
• Digitalnetworkinterface
Thermo Scientific AquaChlor uses DataSticks for pH and a pre-calibrated chlorine detection. The DataSticks are inserted in the sample chamber specifically designed for free chlorine measurements. The unique flow chamber maintains regulated pressure and flow for optimum measurement performance.
Thermo Scientific RDO® Pro Optical Dissolved Oxygen SystemThe latest generation in luminescent dissolved oxygen technology for wastewater monitoring. Eliminates membranes, solutions and start-up time!
• 0to20ppmmeasurementrange (0 to 2000 % saturation)
• Nomembranes–onlyannualfieldreplaceable caps
• Highprecision&accuracywithfast and stable response
• Reducedmaintenance– long lasting calibration
• Noconditioningnecessaryprior to use – fast start up
• Three-yearsensorwarranty
• Resistsphoto-bleachingandabrasive process media
• No“poisoning”bysulfides
• Nocrosssensitivitytocarbondioxide, ammonia, pH, sulfates, chlorides, or hydrogen sulfide
• Plug&playdesignwithdigitalnetwork interface
• Versatileimmersionandball-floatmounting configurations
Thermo Scientific AquaSensors RDO Pro optical dissolved oxygen systems work with the AV38 Local Display/Controller – single or dual sensor inputs – providing unmatched accuracy and low maintenance for wastewater professionals.
Thermo Scientific AquaChlor™ Free Chlorine System
Thermo Scientific AquaSensors / DataStick Measurement System / www.thermoscientific.com/water10
• ConnectstoanyAnalogPlusSensor via internal personality modules
• Canbeeasilyreconfigured in the field for any AnalogPlus measurement
• Displayssensormeasurement and temperature data
• Menufunctions:Calibration,configuration and diagnostics
• Digitalprotocoloptionsforremote measurement, calibration, configuration and diagnostics
• Two-4to20mAcurrentoutputs
• TwoRelaysforAlarm,Control and Wash
• PIDControllerforpH and Conductivity
• Convenient¼DINNEMA 4Xwallmountenclosure
• Optional¼and½DINpanelmount and pipe mount
• Sunshieldavailablefor outdoor use
• MeetsCErequirementsforheavyindustrial use
• CarriescULusgeneralelectricalclassification (UL61010-1)
The AV88 Universal Analyzer can be configured in the field for any AnalogPlus sensor parameter. The¼DINanalyzerhasabacklitalphanumeric display with easy-to-use keypad navigation. Digital protocol options for remote measurement, calibration, configuration and diagnostics. Standard power: 24 VDC. Optional power: 100 to 240 VAC.
Thermo Scientific AV88 AnalogPlus™ Analyzer
AV88 shown with NEMA4Xenclosure
AnalogPlus Differential pH Sensor
Thermo Scientific AquaSensors / DataStick Measurement System / www.thermoscientific.com/water 11
Thermo Scientific AnalogPlus™ Sensors
Rugged, foul resistant sensors are ideal for challenging process applications.
• Sensorsaredesignedforcontinuous use in the most demanding applications
• Fastandaccurate temperature response
• 3/4,1.0and1.5inchNPT sensor sizes
• OfferedinCPVCfora wide range of applications at an affordable price
• OfferedinPEEKfor higher temperatures and greater chemical resistance in process applications
• Engineeringspecifications,mounting hardware and product descriptions available: request individual data sheets
Parameter pH ORP Conductivity Resistivity Toroidal Conductivity
Dissolved Oxygen Ozone
Range 0 to 14 pH ±2100 mV 0 to 5000 µS/cm 0to18.2MΩ•cm 0 to 2 S/cm 0 to 40 ppm 0 to 10 ppm
Resolution 0.01 pH 0.1 mV 4.5 sig figs 4.5 sig figs 1 µS/cm 0.01 ppm 0.01 ppm
Accuracy 0.1% of reading 0.1% of reading 0.1% of reading 0.1% of reading 0.1% of reading 1% of reading 2%
Key FeaturesReplaceable reference salt bridge
Replaceable reference salt bridge
Titanium or 316 SS two-electrode cell
Titanium two-electrode cell
Ideal for CIP (Clean-In-Place) applications
Easy to replace membrane cartridge
Easy to replace membrane cartridge
Sensor Details
Standard, low & high temp, pure water, HF Platinum or gold 0.01, 0.1, & 1.0
cell constants 0.01 cell constant Electrodeless Polarographic Polarographic
Sensor Materials CPVC, PEEK CPVC, PEEK CPVC, PEEK,
Titanium & 316SSCPVC, PEEK, Titanium & 316SS CPVC, PEEK PEEK PEEK
Sensor Process Connection 1 & 1½“ NPT 1 & 1½“ NPT ½, ¾ or 1“ NPT ½, ¾ or 1“ NPT ¾“ NPT 1“ NPT 1“ NPT
Differential pH & ORP
Conductivity & Resistivity
Toroidal Conductivity
Dissolved Oxygen
Ozone
Sensor Specifications
Water Analysis Instruments
North America 166 Cummings Center Beverly,MA01915USA Toll Free: 1-800-225-1480 Tel:1-978-232-6000 info.water@thermo.com
Netherlands Tel: (31) 033-2463887 info.water.uk@thermo.com
China Tel: (86) 21-68654588 wai.asia@thermofisher.com
Singapore Tel: (65) 6778-6876 wai.asia@thermofisher.com
Japan Tel:(81)045-453-9175 wai.asia@thermofisher.com
India Tel:(91)22-4175-8800 wai.asia@thermofisher.com
Thermo Scientific Water Analysis InstrumentsOne Source. Total Solution.
Understanding the challenges of providing safe and reliable drinking water, controlling reliable wastewater treatment processes or providing reliability and value for industrial water treaters – Thermo Scientific process products offer a broad range of analytical measurement options to meet critical requirements with accuracy and confidence you can trust.
Our products are designed for flexibility, ease-of-use and low cost operation. From digital plug and play systems to advanced optical DO sensors and a vast array of differential and analog measurement capabilities, we have the products to fit your water quality and chemical process applications.
• WastewaterTreatment
• DrinkingWater
• Power
• Food&Beverage
• SeawaterDesalination
• Pharmaceutical
• ChemicalProcessing
• Electroplating
• Semiconductor
Call your representative for details on our full line of standard mounting hardware and accessories:
•ImmersionMounting
•UnionMount
•StandardTeeMount
•InsertionHardware
•SanitaryMountandmoreB_AqSensors_E_0610 RevA
©2010 Thermo Fisher Scientific Inc. All rights reserved. RDO is a registered trademark of In-Situ, Inc. All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.
www.thermoscientific.com/water