Post on 11-Jul-2021
THERM TRANSFER EQUIPMENT PVT LTD
DETAILS ABOUT COMPANY
1 VENDOR NAME = THERM TRANSFER EQUIPMENT PVT. LTD.
2 ADDRESS OFFICE
FACOTRY
= 2, D – Block Second Floor,
Kunj Plaza Opp. Rajmahal Baroda – 390 001
[
46, GIDC Savli (Manjusar) Ta:Savli Dist: Vadodara
3 OFFICE- TELEFAX
FACTORY TELEFAX
= 0265 – 2434132
02667-264124
4 PAN NO. = AAACT8917E
5 CONTACT PERSON = D.K.SHUKLA
6 E – MAIL ADDRESS = thermtransfer@sify.com,thermtransfer@sify.com
7 GST REGN NO. (VAT) = 24192100367 dated – 01/07/2002
8 CST REGN NO. = 24692100367 dated – 05/06/1998
9 SSI NO. = 041807396/PMT/SSI dated – 25/11/1999
10 MSMED NUMBER = 2401911013117 dated – 02/05/2008
11 ISO = ISO: 9001: 2008 Certified Companies.
12 ECC NO = AAACT8917EEM001 Dated – 25/05/2011
13
SERVICE TAX NO = AAACT8917ESD002 dated – 18/11/2010
DETAILS OF QUALITY TESTI NG FACILITY AVAILABLE AT
THERM TRANSFER EQUIPMENT PVT LTD.
1) Hydraulic Testing Pump – 3 Nos. Capacity upto – 600 Kg/Cm² 2) Lots of Measuring Instruments like Vernier Calipers, Micrometers, Dial Gauges etc. 3) We are taking service of following agencies for Quality Control.
a) For testing of Raw Material e.g. Chemical & Physical Testing M/s. Met-Heat Engineers, Baroda. b) Radiography Work.
M/s. Beta Radiography, Makarpura, Baroda.
c) Ultrasonic Testing, MPI etc, at M/s. Met Heat Engineers.
4) D. P. Testing of Weld Joints, Plates etc. carried out by ourselves. 5) Air Compressor for Pneumatic Testing of Equipment. 6) Gauges to measure % of expansion available with us. 7) S. R and heat treatment by independent agency. 8) Freon Leak Test at M/s. INOX (I) Ltd.
Following facility available with M/s. Therm Transfer Equipment Pvt Ltd. Area = 2400 mt² Constructed work shop area = 400 mt² Office space = 150 mt² Overhead Cranes = 10 TON capacity – 2 Nos.
Following facility available with M/s. Therm Transfer Equipment Pvt Ltd. Area = 2400 mt² Constructed work shop area = 400 mt² Office space = 150 mt² Overhead Cranes = 10 TON capacity – 2 Nos.
MACHINERY :
1. Welding Rectifiers = 400 amp 3 Nos.
2. TIG Welding controls units = 2 Sets.
3. Bending Machine = 1 Nos.
16 mm x 2 mt Capacity
4. Machine Shop
Lathe = 1 Nos.
Power Hacksaw = 1 Nos.
Drilling Machin e = 2 Nos.
Shaping Machine e t c . = 1 Nos.
5. Lot of Power Tools
6. Lot of Measuring Instruments.
List of Major Clients:
1) M/s. Gujarat Fluorochemicals Limited –Dahej, Ranjitnagar
2) M/s. Nirma Ltd, Alindra, Kalatalav.
3) M/s. Ineos ABS (I) Ltd, Nandsari
4) M/s. Deepak Nitrite Ltd
5) M/s. Lubrizol Advance Materials Pvt.Ltd.
6) M/s. Emerson Process Management (I) Pvt Ltd
7) M/s. Philips Carbon Ltd
8) M/s. Panchmahal Steel Ltd, Halol
9) M/s. Inox India Ltd
10) M/s. United Phosphorus Ltd, Halol & Ankleshwar
11) M/s. Schott Glass India Pvt Ltd
12) M/s. Rajashree Polyfill Ltd
13) M/s. KHS Machinery Pvt Ltd
14) M/s. Vardhman Acrylics Limited
15) M/s. York India Limited
16) M/s. Lupin Limited
17) M/s. SABIC Innovative Plastic Limited
Third Party Inspection Agencies under which we are doing work:
1) M/s Bureau Veritas India Pvt Ltd.
2) M/s. Lloyd’s Register Industrial Services (I) Ltd
3) M/s Toyo Engineering, Bombay.