V4 Series CNC Vertical Machining Center

The Pride of SMEs

sirius

TM

An ISO 9001:2000 and ISO 14001:2004 Machine Tool Manufacturerwww.bfwindia.com

V4 Series CNC Vertical Machining CenterSirius, an exceptionally bright star, is visible from most of the earth. The star gets its brightness from its own luminosity and due to its closeness to the Sun.

Sirius, the V4 series vertical machining center, has been improvised on the hugely successful BMV platform. It empowers SMEs to achieve more with less input. One can be proud of the high class performance of Sirius, coupled with dedicated BFW support.

Apply Sirius confidently on ferrous and non-ferrous material. And, do not worry about mammoth power bills! Your Sirius comes with a power saving device that automatically shuts off sub-assemblies not in use for ten minutes or more.

You are assured of unfailing accuracy for years on Sirius due to its thermo-symmetric heavily ribbed structural design, and its rigid construction. Sirius suits line manufacturing with small footprint and rear chip disposal arrangement.

You can save precious time on fault detection by ordering your Sirius with the QED® option.

sirius

Spindle Characteristics

Pull Stud Details

Tool Holder Details

Easy Chip FlowTable Top Details

Machine Dimensions

MODELCLAMPINg AREA T - SLOTS

A B S n P

TABLE

V-4 (20 Tools) 900 450 65 5 80

P - CD between T-Slots n - number of T-Slots

Sturdy Structure

sirius

TM

Dealer/ RepresentitiveREGIONAL OFFICESBANGALORE: Off Tumkur Road, Bangalore - 560 022, Ph: (080) 28395745, 39821208, Fax: (080) 28394816 E-mail: bfwbangalore@bfw.co.inCHANDIGARH: S.C.O. 907, 1st Floor, NAC, Manimajra, Chandigarh - 160 101. Ph: (0172) 4649055. E-mail: bfwchandigarh@bfw.co.inCHENNAI: 4G, Century Plaza, 560/ 562, Mount Road, Chennai - 600 018. Ph: (044) 24349299, 24343367. Fax: (044) 42132353 E-mail: bfw.chennai@bfw.co.inCOIMBATORE : HI, Damodar Centre (1st Floor), 1050, Avinashi Road, Coimbatore - 641 018, Ph: 0422 2248046/ 2241694 . E-mail: bfwcoimbatore@bfw.co.inHYDERABAD: Flat No.204, 1-11-229, Ramaveda Sirisampada Apt., Near Shyamalal Bldgs., Begumpet, Hyderabad - 500 016, Ph: (040) 27762035 E-mail: bfwhyderabad@bfw.co.inINDORE: C 22, Shreevardhan Complex, RNT Marg, Indore - 452 001.KOLKATA: D-3/5, Gillander House, 8, Netaji Subhash Road, Kolkata - 700 001. Ph: (033) 40102140 - 42, Fax: (033) 22429334. E-mail: bfwkolkata@bfw.co.inMUMBAI: 206, Runwal Commercial Complex, II Floor, LBS Marg, Mulund West, Mumbai - 400 080. Ph: (022) 25653362, 25653358, Fax: (022) 25653392. E-mail: bfwmumbai@bfw.co.inNEW DELHI: 510, Mahatta Towers, B-Block, Community Center, Janakpuri, New Delhi - 110 058, Ph: (011) 25522210, 25522214, Fax: (011) 25530696 E-mail: bfwdelhi@bfw.co.inPUNE: BFW House, 124A, H Block, MIDC Pimpri, Pune - 411 018. Ph: (020) 32524638. E-mail: bfwpune@bfw.co.inRAJKOT: 85-86, 3rd Floor, Samrudhi Bhavan, Opp. Bombay Garage Petrol Pump, Gondal Road, Rajkot - 360 002.

Resident representatives at Aurangabad, Belgaum, and Jamshedpur.We are continuously working on the development of our products, the information contained in this brochure is subject to modification.

Off Tumkur Road, Bangalore - 560 022, India. Ph: 91-80-28395745/ 39821100Fax: 91-80-28394816, e-mail: bfwmarketing@bfw.co.in URL: www.bfwindia.com

An ISO 9001:2000 and ISO 14001:2004 Machine Tool Manufacturer

SpecificaTionS

Table

Clamping area 450 mm x 900 mm

Number/ Width/ CD of T-slots 5/ 18 mm/ 80 mm

Maximum safe load 500 kg

Spindle center distance 100 – 600 mm

Distance from floor 950 mm

Traverse

X-axis 600 mm

Y-axis 500 mm

Z-axis 450 mm

axis Drive

Feed rate 1 – 10,000 mm/min

Rapid traverse X/ Y/ Z axis 24 m/min

Spindle

Power (continuous/ 30 min rating) 5.5/ 7.5 kW

Speed 8,000 rpm

Taper BT 40

automatic Tool changer

Number of tools 20

Maximum tool diameter with adjacent pockets full/ empty

80 mm/ 125 mm

Maximum tool length 250 mm

Maximum tool weight 8 kg

Tool changing time (T-T) 2.5 s

accuracy as per JiS B6338

Positioning ± 0.005 mm

Repeatability ± 0.003 mm

installation Data

Weight 4500 kg

Total connected load 18 kVA

Pneumatic supply 5 bar, 300 lpm

Power supply 415 ± 10% V, 50 ± 2 Hz, 3 phase

CNC system Fanuc Oi/ Siemens 802 sl/ Mitsubishi M70

Standard features

AC servo drivesAC variable speed spindle motorAir blast for spindle nose cleaningAuto tool declampAutomatic centralised lubrication systemBasic coolant system with chip trayFeedback through absolute encoderInstallation kitLevelling padsMachine guardsMachine lampMaintenance tool kitManual pulse generatorOperation and maintenance manualRigid tappingSerial interface RS232 portTelescopic covers on all axes

optional features

AC for electrical cabinetThree tier lampQuick electronic detection (QED®)

•••••

••••••••••••

•••