Post on 09-Nov-2018
Order withyour new front
loaders or retro�tto existing front loaders
Patents: 5,639,201 & 7,210,890
We know trash collection is tough - and your competition is only getting tougher. Fight back by looking forward to the future of automated collection - the Curotto-Can equipped Automated Front Loader. The AFL is the most versatile, most productive and highest capacity collection truck available. It can handle it all - residential, commercial, automated and "take-all". If automation is part of your business, don’t miss the opportu-nity to compare the safety and productivity advantages of a Curotto-Can equipped AFL against old technology automated side loaders. The future of automated collection is here and you’re looking at it.
5 SECONDSpickup-dump-return
See video at: thecurottocan.com or call for a demo 707-939-2802
ADD FLEXIBILITY
Use as Commercial Front Loader
YES NO True dual use unit. Highest performance automated AND commercial collection.
Interchangeable Attachment
YES NO Don't park a truck due to arm issues. Quickly switch out the Curotto-Can and you are up and running.
Single platform for Residential and Commercial
YES NO One truck handles both methods with no compromises - maximize truck utilization.
LOWER MAINTENANCE
COSTS
Low Maintenance Costs
YES NO Simple design and few moving parts mean higher reliability and lower maintenance costs.
Low Cost Arm Replacement
YES NO Don't spend over $25,000 on an arm rebuild. Do it for far less with the AFL.
OPERATESAFER
Forward Facing YES NO Never again “rubber neck” to load a cart. Forward facing collection is more productive and reduces the chance for accidents. Workmans compensa-tion is reduced due to the elimination of neck and back repetitive motion.
Easy Loading of Bulky Items
YES NO The smallest work circle and a low loading height of 45” means appliances and furniture are safely and easily loaded.
REDUCE CART DAMAGE AND
LOSS
Best Cart Engagement
YES NO Tested to over 30,000 cycles with no cart damage. How much would you save eliminating cart damage?
Safely Retrieve Containers
YES NO Never pack a cart again or get inside the hopper- simply remove the cart from the low height Curotto-Can.
BE MORE PRODUCTIVE
Highest Productivity YES NO Five second pickup-dump-return cycle time blows the competition away.
Best Cul-de-sac Performance
YES NO With the arm forward of the steer axle, easily load carts from the sidewalk.
Boom Action Arm YES NO The arm isn't stuck between the axles as with ASLs. The forward arm delivers maximum maneuverabil-ity around parked cars and mailboxes.
Largest Hopper - Largest Body
YES NO 12 cu. yd. hopper + 28 cu. yd. body means no waiting for the hopper to clear and the best payload. Fewer trucks and man hours required for the same work.
Best Gripper Design YES NO Sleek design allows operator to easily slip between tightly placed cans without getting out of the truck.
AFL ASL
LOWER COSTOF
CONTAMINATION
See Contamination YES NO The only system that allows the operator to see and deal with contamination at the source. Send the temp worker sorting your contamination home.
WHAT CAN AN AUTOMATED FRONT LOADER DO FOR YOU? COMPARE FOR YOURSELF AND SEE THE DIFFERENCE BETWEEN AFL AND ASL
CONTAINER
Dimensions
Volume: 4.6 cu. yds.Inside length: 73"Inside width: 64"Inside height: 45.88"Weight: 1,680 lbs.Pocket size (inside): 2"x5"
Construction
Floor: 12 guageSide walls: 12 guageTop reinforcement: (3) - 3x2x.125" HSSFloor reinforcement: (3) 3x2x.125" HSSWindscreen (top): 1x1x.100" HSSWindscreen mesh: 1X12 �attened Lifting pocket: 6x3x.250" HSSLifting pocket length: 42"
CART GRAB AND DUMP MECHANISM
Capacity
Plastic cart compatibility: 32 to 96 gallonsLift capacity: 500 lbs.Cart dump angle: 45 degreesHorizontal traverse: 54"
Cycle Times (based on 10 US gpm supply �ow)
Full slide: extend: 2.5 seconds / retract: 1.5 secondsDump: 2.0 seconds / return: 1.2 secondsGrab: open 0.5 seconds / close: 0.5 seconds
HYDRAULIC SYSTEM
Directional valve: HC Products, electric solenoid activated, mounted to the rear of the container
Hydraulic supply couplers: Aeroquip FD 49 series (one male and one female) by curbside fork, with dust covers
System pressure: 2,000 psi.
Supply �ow source: 10 US gpm priority �ow divider =mounted to packer body. Flow divider is activated by container controls - not continuously activated
Extend/Retract Cylinder
Bore: 1.50"Stroke: 54"Shaft diameter: 1.0"Induction hardened, ground and polished chromed rodsCushioned: on retract
Dump Cylinder:
Bore: 2.5"Stroke: 14.0"Shaft diameter: 1.50"Induction hardened, ground and polished chromed rodsCushioned: on both extend and retract
Grab cylinder:
Bore: 1.50"Stroke: 7.0"Shaft diameter: 1.0"Induction hardened, ground and polished chromed rods
B
CD F
G
H
K
J
I
E
Greaseable race and shaft with recessed zerk
Removable slide track
Replaceable UHMW slides
2.25" Diameter cam followers top and bottom
3" Diameter cam follower
Greaseable drag link
Rubber bumper pad
Single neoprene belt
Tapered roller bearings hubs1,000 lb. capacity
Removeable protective cage for automated components and hydraulics
Safety chains
Swept backwindscreen
Replaceable 1/4" steel wear strip under slide
Grabber tips are rolled around to eliminate cart damage - only rubber can touch cart
Standard lower curbside loading height (fall-away rubber �ap keeps capacity at the maximum - 4.6 cu. yds.)
Location of qwik-connect -comes straight in fromthe truck at the pocketto the main valve
TECHNICAL DATA AND DIMENSIONS
CONTROL SYSTEM
Joystick type: Electrical, single handle (dual axis) for slide and dump functions with thumb switch in handle for grip/release function
Joystick position: Curbside driving position - operated with left hand - armrest provided
Curbside accessible switch bank (optional): Cluster of three rocker switches to control all can functions mounted on RH side of steering wheel at curbside driving position and accessible from outside the cab on low entry models
Control lockout switch (optional): Toggle switch mounted in main control box disengages electrical feed to all can controls
PAINT
Metal Preperation
SP7 Brush-O� Blast - degreased with HD precleaner to =remove all contamination - sanded with 80 grit paper to =reuduce blast amplitude
Container Paint
Base container primered - sanded - top coat of Cardinal Polyurethane
Bolt-On Components Including Automated Components
Acid washed - sanded - powder coated with HB Fuller Co. Zinc Black TGIC Powder
L
A Can width 64.00"B Can edge to lifting pocket outside edge (curbside only) 12.38" C Total can length 81.75"D Can width minus lifting pockets 74.25"E Lifting pocket length 42.00"F Lifting pocket width (inside dimension) 2.50"
G Lifting pocket height (inside dimension) 5.25"H Wind sreen height 9.00"I Can height (less wind screen) 46.35"J Total height 55.51"K Dump angle 45 degreesL Horizontal traverse 54.00"M Lift-over height for hand loading 35.375"
SPECIFICATIONS
A
CONTACT INFORMATIONPhone: (707) 939-2802
Fax: (413) 521-6644 Online: thecurottocan.com
M
Ask about how toarrange a demo
Visit the website for more info and video