Post on 15-Mar-2021
Domain : bpcleproc.in
Parent department: BPCL
Department : CPO SERVICES Department officer : Varun Sharma
System ID : 10801 Tender Reference No. : 1000251041
Tender Title : ELECTRICALREVAMPINGJOB ATBUDGEBUDGE
Tender Date : 22/02/2016
Tender Description : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
Envelope Bidding Type : In 2 Part bidding Envelope Bidding Option : Document fees andEMD + Technicalbid + Price bid
Bid validity period (in days) : 180 Type of contract : Works
Project duration / delivery orcompletion period (in days)
: 300 Form of Contract : Buy
Bid submission configuration
Bidding access : Open/Press
Base currency : INR Bidding type : National
Key configuration
Bidding variant : Buy Mode of pre-bid meeting : Offline
Pre Bid Meeting Venue :
BHARAT
PETROLEUM
CORPORATION
LIMITED,
MUMBAI
Dates configuration
Document downloading startdate
: 22/02/201617:00:00
Document downloading enddate
: 21/03/201615:00:00
Bid submission start date : 22/02/201617:00:00
Bid submission end date : 21/03/201615:00:00
Tender Document
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 1 of 144
Pre-bid meeting start date : 01/03/201611:00:00
Pre-bid meeting end date : 01/03/201617:00:00
Bid opening date : 21/03/201615:01:00
Document / EMD / Security fee detail
Tender fees : Not Applicable Mode of EMD payment : Offline
EMD amount : 100000.00 EMD payable at : BHARATPETROLEUMCORPORATIONLIMITED,MUMBAI
Emd Clause :
EMD Payment Method : Demand Draft,Bank Guarantee
Documents
Sr.No. File name File description
Filesize (in
MB)Date and time Status
1 Covering Letter-Annexure 0_REV1.pdf
COVERING LETTER 0.304 19/02/201609:27:12
Approved
Bidding forms
Documentfees andEMD
EMD Form
Details Bidder's Response
EMD Amount offering
EMD payment method
Instrument No.
Payment Date
EMD Form
Technicalbid
Annexure I- Instructions to Bidders
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 2 of 144
Bidders to note that the bid evaluation will be done considering the total value of all the 4 schedule.
1. Form ID no. 55943- Electrical Revamping Job: Installation : Schedule for Installation worksonly
2. Form ID no. 55944- Electrical Revamping Job:Supply&Installion: Schedule for Supply andInstallation works.
3. Form ID no. 55945- Electrical Revamping Job: Dismantling: Schedule for Dismantling worksonly
4. Form ID no. 56098- Price Bid _ Supply_CPO : Schedule for Supply items only.
Sr.no. Description
Bidder'sConfirmation
1 I /We hereby agree to all the terms and conditions of theattached Annexure
Technicalbid
General Instructions to bidders for e-tendering
Sr.no. Description
Bidder'sConfirmation
1 I /We hereby agree to all the terms and conditions of theattached Annexure
Annexure II- General Instructions to bidders for e-
tendering
Technicalbid
Bidder shall have to essentially accept the clause mentioned here which shall be governing theselection criteria of successful bidders.
Bid Qualification Criteria and Evaluation methodology
Sr.No. Item Description
Bidder'sConfirmation
1 I /We hereby agree to all the terms and conditions of theattached Annexure
Annexure III- Bid Qualification Criteria and Evaluation
methodology
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 3 of 144
Technicalbid
NOTE: KINDLY UPLOAD RESPECTIVE DOCUMENTS EXACTLY IN FRONT OF THEROW.
NOTE: KINDLY UPLOAD APPROPRIATE DOCUMENTS FOR MEETING BIDQUALIFICATION CRITERIA. BIDS WITHOUT REQUIRED DOCUMENTS ARE LIABLE TOGET REJECTED.
SR. TENDER REQUIREMENTS BIDDER'SCONFIRMATION
2 Technical Criteria: Bidders to upload the requireddocuments against the Technical Criteria of BQC
3 Financial Criteria: Bidders to upload the requireddocuments against the Financial Criteria of BQC
4 Any Other Document relevant for BQC
Annexure IV- DOCUMENT UPLOAD FOR BID
QUALIFICATION CRITERIA (BQC)
Technicalbid
General Purchase Conditions & Safety Requirement
General Conditions of Contract & Safety Requirement
Description BiddersConfirmation
I /We hereby agree to all the terms and conditions of the attached Annexurefor General Conditions of Contract
I /We hereby agree to all the terms and conditions of the attached Annexurefor Safety Requirements
Annexure V- General Contract Conditions & Safety
Requirement
Technicalbid
Bidder shall have to essentially sign the Integrity Pact(IP) for participating in the tender. Bidder isrequired to download the IP document, sign and also take the witness signatures and upload the
Annexure VI- Integrity Pact(IP)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 4 of 144
same.
Bidder should ensure to send the Original Signed Integrity Pact along with the DD or ExmptionCertificate (as applicable) by the due date and time to the following address :
Mr. Varun Sharma / Mr. Sanson T Koleth
Central Procurement Organization,
Bharat Petroleum Corporation Limited,
A Installation Sewree Fort Road,
Sewree East, Mumbai 400015.
Bid (s) received without the EMD and Integrity Pact is liable to be rejected.
IP
Sr.No. Item Description
Bidder'sConfirmation
1 Download the Integrity Pact of BPCL. The same is required to besigned by the vendor and also take the witness signatures and uploadthe same.
Technicalbid
Bidder shall have to essentially agree to the specifciations and other conditions as mentioned in theuplaoded documents. Ay Deviation to this shall be required to be quoted in Deviation to theTechnical Specification Form.
TECHNCAL SPECIFICATIONS, DRAWINGS, LAYOUTS
Sr.No. Item Description
Bidder'sConfirmation
1 I /We hereby agree to all the terms and conditions of the attachedAnnexure (including Soil Investigation report, Site report,Specifications and other drawings. Any Deviation can be mentioned inDeviation Statement only.
Annexure VII-Technical Specification of the Tender/
Drawings/Soil Investigation Report
Technicalbid
Deviation
Annexure VIII- Deviation Statement
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 5 of 144
AnnexureNumber
FormName
ClauseNumber
Deviation (IfAny)
Justification forDeviation
In case of no Deviations, pls put No Deviation
Technicalbid
UPLOADE OTHER DOCUMENTS (If Required)
SrNo Particular
BidderRemarks
1 UPLOADING OTHER DOCUMENTS BY BIDDER (IFREQUIRED)
UPLOAD OTHER DOCUMENTS (If Required)
Technicalbid
VENDOR MASTER
DESCRIPTION BIDDER’SRESPONSE
Company Name
Full Address with City/ District & State with Pin Code
Telephone number (s) with STD Code
Contact Person
Mobile number
Fax number (s) with STD Code
E-mail ID (s)
Vendor Code of BPCL (If you know please mention the code else notapplicable)
Type of Company:Please specify type of company: Partnership / Limitedliability partnership / Private Limited / Public Limited / Central PSU / StatePSU / Individual / HUF / Sole Propritorship Firm / Association of PersonsAOP) / Body of Individuals (BOI) / Artificial Judicial Person / State GovtDept / Cent Govt Dept / Local Authority / Co-op Society / Trust / ForeignCompany
Incorporation Certificate number
VENDOR DETAILS (VENDOR MASTER)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 6 of 144
Incorporation Date
Excise Details:ECC NO
Excise Regn no
Excise commissionerate
Excise Range
Excise Divison
Excise Tax Indicator
PAN Number
Service Tax Registration Details:Registration number
Registration category
Registration Validity till
Registration City
Registration State
VAT Registration Details:Registration State
Registration type
Tax Registration number
Registration Valid from
Sales Tax (CST) Registration Details:Registration State
Registration type
Tax Registration number
Registration Valid from
MSME Details:MSME Registration no.
Certificate Date
Category of Unit (Manufacturing / Services)
Registration State
Registration District
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 7 of 144
Valid From
MSME Type (Micro / Small / Medium)
Registration activities
Special Status like SC/ST or others.
Technicalbid
Declaration of Holiday Listing
Sr.no. Description
Bidder'sConfirmation
1 I /We declare that we are not currently serving any Holiday Listingorders issued by BPCL or MOPNG debarring us from carrying onbusiness dealings with the BPCL/ MOPNG or serving a banning orderby another Oil PSE.
Declaration by Bidders for Holiday Listing
Price bid
Label Value
Short Text Electrical Revamping Job: Installation
Quntity 1.00000
Unit of Mesurnment LS
RFQ Item 220
Plant 1200
Label Value
Outline 1
Outline Short text -
Outline Long text -
Parent Outline 0
Electrical Revamping Job: Installation
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 8 of 144
Column name Bidder response
SAP Item No. 10
Service code 9017611
Short Description ELC Install n commission COM OF TRANSFOR
Long Description
Installation n Commissioning ofInstallation including transporting from owner's store,erection, glanding, testing and commissioning of 1600KVA, 6.6 KV/433 V Indoortype transformer withOLTC, RTCC with AVR as per euipmentspecificationssheet, Technical Particular and as perdirected by the site Incharge.Note: a) Foundation works shall be paid separatelyunder respectivecivil item. The cost should includenecessary filtration of oil, testingof BDV value fromgovt. authorised labs and furnishing of testcertificatesprior to charging of the transformer.b) The civil item on excavation, sand filling, cableprotection tiles, GI pipes etc. shall be measured andpaid separately under respectivecivil item.
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 20
Service code 9017514
Short Description . . . INSTALLATN OF DG SET
Long Description
Installation including transporting from owner's store,
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 9 of 144
cable glanding, termination, testing andcommissioning of 415 V Skid MountedRadiatorcooled Diesel Generating set complete withacoustic enclosure, residential silencers / bellows, DGControl Panel, batteries, batterycharger (in controlpanel itself), meters, instruments, fuel day tankandallied fuel pipelines and fittings, control cablesbetween the DGset and control panel laid in trench,AVM Pads, hand operated fueltransfer pump etccomplete and confirming to equipment specification,specification sheet and technical particular.Installation, erection, aligning and commissioning ofthe electrical control panels for the DGSets on suitableM Channels including chipping the floor / trench,grouting in CC 1:2:4, curing etc. complete as per siteinstructions.Note: The channel supports on cable trench required toposition thepanels shall be measured and paidseparately.415V, 900/1010 KVA DG Set with AMF ControlPanel as Single Line Diagram
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 30
Service code 9017513
Short Description . . . INSTALLATN OF DG SET
Long Description
Installation including transporting from owner's store,cable glanding, termination, testing andcommissioning of 415 V Skid MountedRadiatorcooled Diesel Generating set complete withacoustic enclosure, residential silencers / bellows, DGControl Panel, batteries, batterycharger (in controlpanel itself), meters, instruments, fuel day tankand
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 10 of 144
allied fuel pipelines and fittings, control cablesbetween the DGset and control panel laid in trench,AVM Pads, hand operated fueltransfer pump etccomplete and confirming to equipment specification,specification sheet and technical particular.Installation, erection, aligning and commissioning ofthe electrical control panels for the DGSets on suitableM Channels including chipping the floor / trench,grouting in CC 1:2:4, curing etc. complete as per siteinstructions.Note: The channel supports on cable trench required toposition thepanels shall be measured and paidseparately.415V, 250 KVA DG Set with AMF Control PanelSingle Line Diagram
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 40
Service code 9017512
Short Description ELE WIRING SUBMAIN PVC INSTALLATN OFPMC
Long Description
Installation, glanding, Testing and Commissioning atsite of freestanding, floor mounting, cubicle type drawout / non draw out as perenclosed technicalspecifications, relevant IS standards made ofCRCAsheet steel of thickness not less than 1.6 mm fordoors and panels (theload bearing members shall notbe less than 2 mm thk), removable glandplates of 3mm thick with the incoming and outgoing feeders asgiven inthe SLD, equipment specification,specification sheet <(>&<)>technicalparticular. The panel shall be with allinstrumentation as perspecifications <(>&<
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 11 of 144
)> SLD, painting etc. complete.Item : Power Cum Motor Control Centre (PMCC)
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 50
Service code 9017511
Short Description ELE WIRING SUBMAIN PVC INSTALLATN OFPAN
Long Description
Installation, glanding, Testing and Commissioning atsite of freestanding, floor mounting, cubicle type drawout / non draw out as perenclosed technicalspecifications, relevant IS standards made ofCRCAsheet steel of thickness not less than 1.6 mm fordoors and panels (theload bearing members shall notbe less than 2 mm thk), removable glandplates of 3mm thick with the incoming and outgoing feeders asgiven inthe SLD, equipment specification,specification sheet <(>&<)>technicalparticular. The panel shall be with allinstrumentation as perspecifications <(>&<)> SLD, painting etc. complete.Item : Emergency Panel
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 12 of 144
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 60
Service code 9017510
Short Description ELE WIRING SUBMAIN PVC INSTALLATN OFPAN
Long Description
Installation, glanding, Testing and Commissioning atsite of freestanding, floor mounting, cubicle type drawout / non draw out as perenclosed technicalspecifications, relevant IS standards made ofCRCAsheet steel of thickness not less than 1.6 mm fordoors and panels (theload bearing members shall notbe less than 2 mm thk), removable glandplates of 3mm thick with the incoming and outgoing feeders asgiven inthe SLD, equipment specification,specification sheet <(>&<)>technicalparticular. The panel shall be with allinstrumentation as perspecifications <(>&<)> SLD, painting etc. complete.Item : Emergency Lighting Panel
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 13 of 144
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 70
Service code 9017509
Short Description ELE WIRING SUBMAIN PVC INSTALLATN OFPAN
Long Description
Installation, glanding, Testing and Commissioning atsite of freestanding, floor mounting, cubicle type drawout / non draw out as perenclosed technicalspecifications, relevant IS standards made ofCRCAsheet steel of thickness not less than 1.6 mm fordoors and panels (theload bearing members shall notbe less than 2 mm thk), removable glandplates of 3mm thick with the incoming and outgoing feeders asgiven inthe SLD, equipment specification,specification sheet <(>&<)>technicalparticular. The panel shall be with allinstrumentation as perspecifications <(>&<)> SLD, painting etc. complete.Item : Lighting Panel
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 80
Service code 9017508
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 14 of 144
Short Description ELE WIRING SUBMAIN PVC INSTALLATN OFPAN
Long Description
Installation, glanding, Testing and Commissioning atsite of freestanding, floor mounting, cubicle type drawout / non draw out as perenclosed technicalspecifications, relevant IS standards made ofCRCAsheet steel of thickness not less than 1.6 mm fordoors and panels (theload bearing members shall notbe less than 2 mm thk), removable glandplates of 3mm thick with the incoming and outgoing feeders asgiven inthe SLD, equipment specification,specification sheet <(>&<)>technicalparticular. The panel shall be with allinstrumentation as perspecifications <(>&<)> SLD, painting etc. complete.Item : HVLR Panel
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 90
Service code 9017507
Short Description ELE WIRING SUBMAIN PVC INSTALLATN OFPAN
Long Description
Installation, glanding, Testing and Commissioning atsite of freestanding, floor mounting, cubicle type drawout / non draw out as perenclosed technicalspecifications, relevant IS standards made ofCRCAsheet steel of thickness not less than 1.6 mm for
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 15 of 144
doors and panels (theload bearing members shall notbe less than 2 mm thk), removable glandplates of 3mm thick with the incoming and outgoing feeders asgiven inthe SLD, equipment specification,specification sheet <(>&<)>technicalparticular. The panel shall be with allinstrumentation as perspecifications <(>&<)> SLD, painting etc. complete.Item : Automatic Power Factor Control Panel
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 100
Service code 9017506
Short Description ELE WIRING SUBMAIN PVC INSTALLATN OFPAN
Long Description
Installation, glanding, Testing and Commissioning atsite of freestanding, floor mounting, cubicle type drawout / non draw out as perenclosed technicalspecifications, relevant IS standards made ofCRCAsheet steel of thickness not less than 1.6 mm fordoors and panels (theload bearing members shall notbe less than 2 mm thk), removable glandplates of 3mm thick with the incoming and outgoing feeders asgiven inthe SLD, equipment specification,specification sheet <(>&<)>technicalparticular. The panel shall be with allinstrumentation as perspecifications <(>&<)> SLD, painting etc. complete.Item : MOV Panel
Unit of Measurement (UOM) Number (NO)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 16 of 144
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 110
Service code 9017505
Short Description ELE WIRING SUBMAIN PVC INSTALLATIONPAN
Long Description
Installation, glanding, Testing and Commissioning atsite of freestanding, floor mounting, cubicle type drawout / non draw out as perenclosed technicalspecifications, relevant IS standards made ofCRCAsheet steel of thickness not less than 1.6 mm fordoors and panels (theload bearing members shall notbe less than 2 mm thk), removable glandplates of 3mm thick with the incoming and outgoing feeders asgiven inthe SLD, equipment specification,specification sheet <(>&<)>technicalparticular. The panel shall be with allinstrumentation as perspecifications <(>&<)> SLD, painting etc. complete.Item : ROSOV Panel
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded by
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 17 of 144
officer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 120
Service code 9017504
Short Description ELE WIRING SUBMAIN PVC INSTALLATNPANEL
Long Description
Installation, glanding, Testing and Commissioning atsite of freestanding, floor mounting, cubicle type drawout / non draw out as perenclosed technicalspecifications, relevant IS standards made ofCRCAsheet steel of thickness not less than 1.6 mm fordoors and panels (theload bearing members shall notbe less than 2 mm thk), removable glandplates of 3mm thick with the incoming and outgoing feeders asgiven inthe SLD, equipment specification,specification sheet <(>&<)>technicalparticular. The panel shall be with allinstrumentation as perspecifications <(>&<)> SLD, painting etc. complete.Item : Lube Power Control Centre Panel
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 18 of 144
Column name Bidder response
SAP Item No. 130
Service code 9017594
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FR cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Aluminum)3½ C x 400 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 4500.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 19 of 144
Column name Bidder response
SAP Item No. 140
Service code 9017593
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FR cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Aluminum)3½ C x 300 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 5000.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 20 of 144
Column name Bidder response
SAP Item No. 150
Service code 9017583
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FR cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Aluminum)3½ C x 240 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 1800.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 21 of 144
Column name Bidder response
SAP Item No. 160
Service code 9017584
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FR cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Aluminum)3½ C x 150 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 6500.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 22 of 144
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 170
Service code 9017585
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FR cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Aluminum)3½ C x 95 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 4000.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 23 of 144
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 180
Service code 9017586
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FR cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Aluminum):3½ C x 70 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 4800.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 24 of 144
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 190
Service code 9017587
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FR cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Aluminum):3½ C x 50 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 21500.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded by
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 25 of 144
officer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 200
Service code 9017588
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FR cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Aluminum)4 C x 16 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 5000.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 26 of 144
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 210
Service code 9017589
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FR cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Aluminum)4 C x 10 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 1500.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 27 of 144
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 220
Service code 9017592
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FRLS cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Copper)7 C x 2.5mm²
Unit of Measurement (UOM) Meter (M)
Quantity 21000.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 28 of 144
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 230
Service code 9017591
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FRLS cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Copper):3 C x 2.5 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 21500.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 29 of 144
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 240
Service code 9017590
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Horizontal and vertical laying of 1.1 KV grade XLPEinsulated armouredaluminum / copper, FRLS cables asper Cables Schedule of the followingsizes inreadymade concrete or soil trenches, trays, risers,supporthangers, saddles etc, pulling through pipe onwalls, floors and columns, steel structures includingtransportation from stores to site, unpacking, erection,dressing including supply and fixing of aluminumtagsfor identification of cable at both ends and at every 30meterinterval, providing GI saddles, saddle bars GI /Al clamps for cableslaid vertically on walls / column /structures etc, GI bolts, nuts andwashers complete withall labor, material and as per specificationenclosed anddirection of site in-charge.Note: a. The rate of Installation should be inclusive ofCable clamps, tags Saddles, Consumables etc.Trays/pipes, Glands, trenches, fabricatedtray supportsetc will be covered <(>&<)> paid inSeparate Item.b. The necessary civil works shall be measured andpaid separately underrespective civil items.c. Tenderers to note that cables being dismantled andquantity alreadyavailable at site shall be used in worksat appropriate places andbalance quantity as per siterequirement shall be procured and suppliedforcompletion of works.FRLS TYPE CABLE (Copper):4C x 2.5 mm²
Unit of Measurement (UOM) Meter (M)
Quantity 28500.00
Unit Rate(in Rs. in Fig)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 30 of 144
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 250
Service code 9017600
Short Description MISC APPROVAL FROM SEB
Long Description
MISCELLANEOUSCharges for preparation of drawings, obtainingdrawing approval, arranging for inspection gettingsafety certificate from CEA authoritiesand energisationof HT Panel, Transformer, PMCC room & Generatorareasin synthetic enamel paint of approved colour &required etc supply tothe installation. The contractorshall give 5 sets of approved as builtdrawings. Thecharges shall also include painting of single linediagramat shade as approved by site engineer. Note: a.The statutory paymentto be made to the CEAauthorities will be reimbursed at actual onsubmissionof the original receipt to the owner.b. The job also includes all liasoning to be carried outwith StateElectricity Board and West Bengal Pollutioncontrol board authoritiesfor obtaining necessaryapproval for successful commissioning of the facilities.
Unit of Measurement (UOM) Lumpsum (LS)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 31 of 144
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 260
Service code 9017599
Short Description BOX GI SUPnFIX INSTALLATN OFBUSDUCT
Long Description
Installation, Testing and commissioning of 2500 A,415 V, 50 kA, TPN LTBusduct (Route Lengthmeasured from center line flanged joint).
Unit of Measurement (UOM) Meter (M)
Quantity 30.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 270
Service code 9017598
Short Description BOX GI SUPnFIX INSTALLATN OF BENDS
Long Description
Installation, Testing and commissioning of 90°
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 32 of 144
Horizontal and Verticalbends over above straight run.
Unit of Measurement (UOM) Number (NO)
Quantity 4.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 280
Service code 9017597
Short Description BOX GI SUPnFIX INSTALLATN OFADAPTOR
Long Description
Installation, Testing and commissioning of Horizontaland Verticalbends over above straight run.
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 33 of 144
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 290
Service code 9017596
Short Description BOX GI SUPnFIX INSTALLATN OFADAPTOR
Long Description
Installation, Testing and commissioning of AdaptorBox at Switch Boardend over above route length.
Unit of Measurement (UOM) Number (NO)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 300
Service code 9017595
Short Description BOX GI SUPnFIX INSTALLATN OFCHAMBER
Long Description
Installation, Testing and commisioning of Phase CrossOver Chamber overabove route length.
Unit of Measurement (UOM) Number (NO)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 34 of 144
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 310
Service code 9017601
Short Description ELC Install n commission INSTALLATN OF T
Long Description
Installation n Commissioning ofInstallation, Testing and commissioning of TPNAluminum flexible atSwitch Board end.
Unit of Measurement (UOM) set (SET)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 35 of 144
Column name Bidder response
SAP Item No. 320
Service code 9017582
Short Description ELC . INSTALLATN OF TPN CU
Long Description
Installation, Testing and commissioning of TPNTinned Copper flexibleat Transformer end.
Unit of Measurement (UOM) set (SET)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 330
Service code 9017581
Short Description LIGHT FIX . ERECTION OFFLP LIGHT
Long Description
Erection, glanding of Well glass flameproof &hoseproof light fittingswith toughened glass and meshsuitable with LED lamp . The job includesthe cost offitting and erection, lamp on suitable MS bracketsetc.(Location: Pump Houses : 54 Nos. & TLF Shed: 96Nos.)
Unit of Measurement (UOM) each (EA)
Quantity 150.00
Unit Rate(in Rs. in Fig)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 36 of 144
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 340
Service code 9017550
Short Description ELE WIRING Wiring ERECTN OF FLP BOARD
Long Description
ELETRICAL SORErection, glanding of Flameproof & hoseproofLighting Distribution Boardwith 32 A 4P MCB asincomer and 9 nos. 10A DP MCBs as outgoing.(TLFGantry : 2 Nos, Pump House : 3 Nos, RailwayGantry: 3 Nos.)
Unit of Measurement (UOM) each (EA)
Quantity 8.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 37 of 144
SAP Item No. 350
Service code 9017549
Short Description ELE . . INSTALLATN OF FLP PB
Long Description
ELETRICAL SORinstallation, glanding, testing and commissioning ofwall / structuremounted flameproof type (FLP) Pushbutton stations with ammeter (72 mm)of suitablerange, terminal blocks.
Unit of Measurement (UOM) each (EA)
Quantity 77.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 360
Service code 9017579
Short Description LT UPS SYSTEM ERECTION INSTALLATN OFUPS
Long Description
Installation glanding, testing and commissioning ofDC UPS havingparallel redundant arrangement andVRLA battery banks , includingtransportation fromowner's store to place of Installation, charginganddischarging of cells, including capacity test etc.aligning, leveling, grouting, assembly of battery racks,supply and fixing of allaccessories like foundationbolts, inter-cell connectors etc. includingall labour andmaterials complete as per approved drawings,specifications of this tender and directions of Engineer-in-charge.5 KVA DC UPS
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 38 of 144
Unit of Measurement (UOM) set (SET)
Quantity 1.00
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Bidders to quote as per the Scope of Work Defined in Long Description
Price bid
Label Value
Short Text Electrical Revamping Job:Supply&Installa
Quntity 1.00000
Unit of Mesurnment LS
RFQ Item 230
Plant 1200
Label Value
Outline 1
Outline Short text -
Outline Long text -
Parent Outline 0
Electrical Revamping Job:Supply&Installa
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 39 of 144
Column name Bidder response
SAP Item No. 10
Service code 9017578
Short Description CABLE TRAY FABR SUPPLY LAYING OFCABLES
Long Description
Supply <(>&<)> Laying of 3CX240mm² XLPE insulated 6.6 KV Grade(UE)armoured aluminum cable from CESB RMG toVCB Panel <(>&<)> VCB Paneltotransformer etc. including clamping whereverrequired. The work includessupplying and fillingsealing compound at either ends of the GIpipeswherever provided for cable protection.Note: The civil item on excavation, sand filling, cableprotectiontiles, GI pipes etc shall be measured and paidseparately under respective civil item.
Unit of Measurement (UOM) RM
Quantity 100.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 20
Service code 9017577
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 40 of 144
Short Description ELE WIRING SUBMAIN PVC INSTALLTN OF CT
Long Description
Supply, installation, testing and commissioning of200/5, 6.6 KV, 25 KA, 2 Core CT, 15VA, Core - 1Class 1 for metering and Core - 2, PS Classforprotection (3 Nos.) with Ammeter Range 0 - 200 Awith CTR 200/5, 0 -240º Scale, Size : 144 X144 mm in existing HT VCB Panel incomerafterremoval of existing CT and Ammeter. CT <(>&<)> Ammeter shall includesupply andinstallation, materials, drilling, cutting, wiring,relaycoordination etc
Unit of Measurement (UOM) SET
Quantity 1.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 30
Service code 9017576
Short Description ELE WIRING SUBMAIN PVC SUP INSTALLATNOF
Long Description
Supply, installation, testing and commissioning of150/5, 6.6 KV, 25 KA, 2 Core CT, 15VA, Core - 1Class 1 for metering and Core - 2, PS Classforprotection (3 Nos.) with Ammeter Range 0 - 150 A
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 41 of 144
with CTR 150/5, 0 -240º Scale, Size : 144 X144 mm in existing HT VCB Panel Outgoing for1600KVA Transformer after removal of existing CT andAmmeter. CT andAmmeter shall include supply andinstallation, materials, drilling, cutting, wiring, relaycoordination etc
Unit of Measurement (UOM) SET
Quantity 1.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 40
Service code 9017575
Short Description ELE . . SUPPLY INS OF ANNUNC
Long Description
ELETRICAL SORTV / Telephone wiringSupply, installation, testing and commissioning of 12Window Annunciatorwith accept / resetting / testingfacility for buchholz, oiltemperature, windingtemerature & low oil level alarm along withbreakertripped due to fault in existing HT VCB PanelOutgoing for 1600 KVATransfomer with necessorywirings. Annunciator shall include supplyandinstallation, materials, drilling, cutting, relaycoordination etc.
Unit of Measurement (UOM) SET
Quantity 1.00000
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 42 of 144
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 50
Service code 9017574
Short Description CABLE JOINTS INSTALL SUPPLYING HT JOINTI
Long Description
Supplying and providing including labor and materials,push on type HTjointing kit RAYCHEM /MAHINDRA / CCI make suitable for 3CX240mm² 11 KVgrade (UE) armoured aluminumcable with necessary accessories, crimping, earthing,jointing with copper crimped type sockets etc.complete.Type : Indoor
Unit of Measurement (UOM) NO
Quantity 6.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded by
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 43 of 144
officer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 60
Service code 9017572
Short Description ELE WIRING Wiring EXHAUST PIPE OF DG
Long Description
ELETRICAL SORSupply, fabrication, cutting, welding of medium dutyMS pipelineconforming to IS 3589 of the followingsizes for the exhaust line forthe DG sets including allflanges, bends, elbows, bolting, clamping onthe walls /ceiling with necessary angle iron supportsincludinggrouting in CC1:2:4 with all civil works andproviding rain hood at theend of the exhaust pipe andlagging the pipes inside the DG set room upto silencerwith thermal insulation with aluminum clading (as perIS)etc. complete and as per directions of site engineer.Size: 8" Dia
Unit of Measurement (UOM) RM
Quantity 20.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 44 of 144
Column name Bidder response
SAP Item No. 70
Service code 9017573
Short Description ELE WIRING Wiring EXHAUST PIPE OF DG
Long Description
ELETRICAL SORSupply, fabrication, cutting, welding of medium dutyMS pipelineconforming to IS 3589 of the followingsizes for the exhaust line forthe DG sets including allflanges, bends, elbows, bolting, clamping onthe walls /ceiling with necessary angle iron supportsincludinggrouting in CC1:2:4 with all civil works andproviding rain hood at theend of the exhaust pipe andlagging the pipes inside the DG set room upto silencerwith thermal insulation with aluminum clading (as perIS)etc. complete and as per directions of site engineer.Size: 10" Dia
Unit of Measurement (UOM) RM
Quantity 20.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 80
Service code 9017571
Short Description ELE WIRING . SUP INST ACOUST ENC
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 45 of 144
Long Description
ELETRICAL SOR.Acoustic enclosure for existing 415V, 500 KVA DGSet as per as perenclosed tender specifications.
Unit of Measurement (UOM) NO
Quantity 1.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 90
Service code 9017530
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Supply, Installation and fixing of NON FLP typeCable Terminationstype double compression nickelplated brass cable gland, crimping typetinned copperlugs & termination/fixing of the same including supplyofcrimping type tinned copper lugs & PVC/XLPE
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 46 of 144
cable hoods etc for thefollowing cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 3½ C x 400 mm²
Unit of Measurement (UOM) EA
Quantity 20.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 100
Service code 9017529
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Supply, Installation and fixing of NON FLP typeCable Terminationstype double compression nickelplated brass cable gland, crimping typetinned copperlugs & termination/fixing of the same including supplyofcrimping type tinned copper lugs & PVC/XLPEcable hoods etc for thefollowing cable sizes.
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 47 of 144
NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 3½ C x 300 mm²
Unit of Measurement (UOM) EA
Quantity 42.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 110
Service code 9017528
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Supply, Installation and fixing of NON FLP typeCable Terminationstype double compression nickelplated brass cable gland, crimping typetinned copperlugs & termination/fixing of the same including supplyofcrimping type tinned copper lugs & PVC/XLPEcable hoods etc for thefollowing cable sizes.NOTE : Contractor to Note that existing Panel for
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 48 of 144
which existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 3½ C x 240 mm²
Unit of Measurement (UOM) EA
Quantity 12.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 120
Service code 9017519
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Supply, Installation and fixing of NON FLP typeCable Terminationstype double compression nickelplated brass cable gland, crimping typetinned copperlugs & termination/fixing of the same including supplyofcrimping type tinned copper lugs & PVC/XLPEcable hoods etc for thefollowing cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 49 of 144
Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 3½ C x 150 mm²
Unit of Measurement (UOM) EA
Quantity 32.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 130
Service code 9017610
Short Description CABLE GLAND INDS SUP INS.NON FLP CABL
Long Description
THE SCOPE OF WORK SHALL INCLUDEGLANDING AND TERMINATION OFFOLLOWINGTYPE OF GLANDS/TERMINATIONSOF FOLLOWING SIZES OF CABLES.TERMINATIONCHARGES SHALL INCLUDEMAKING THE REQUISITE HOLES IN THEGLAND PLATE, FIXING THE GLANDS,TERMINATING THE CABLES IN THE GLANDS,APPLICATION OFSEALING COMPOUND AS PERMANUFACTURER'S RECOMMENDATIONSFORMOTORS/PANELS, MOUNTING OF COREBALANCE CT IF REQUIRED, EARTHINGTHECABLE ARMOUR, CRIMPING THE AL/CUCABLE LUGS ON EACH CORE,NEATLYCLAMPING THE CABLES IN THECABLE ALLEYS/ WIRING TROUGHS ANDCONNECTINGTO THE TERMINALS.CONSUMABLE ITEMS LIKE CRIMPING PASTE,INSULATION TAPESETC, STRIPPING OF CABLEINSULATION, FIXING OF CABLE GLANDS,
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 50 of 144
PUTTING PVCHOODS ETC COMPLETE.
Supply, Installation and fixing of NON FLP typeCable Terminations. Industrial type doublecompressionnickel plated brass cable gland, crimpingtype tinned copper lugs &termination/fixing of thesame including supply of crimping type tinnedcopperlugs & PVC/XLPE cable hoods etc for the followingcable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size of cable : 3½ C x 95 mm²
Unit of Measurement (UOM) EA
Quantity 12.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 140
Service code 9017521
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIOR
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 51 of 144
TO SUPPLY OF GLANDS.
Supply, Installation and fixing of NON FLP typeCable Terminationstype double compression nickelplated brass cable gland, crimping typetinned copperlugs & termination/fixing of the same including supplyofcrimping type tinned copper lugs & PVC/XLPEcable hoods etc for thefollowing cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 3½ C x 70 mm²
Unit of Measurement (UOM) EA
Quantity 20.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 150
Service code 9017522
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 52 of 144
Supply, Installation and fixing of NON FLP typeCable Terminationstype double compression nickelplated brass cable gland, crimping typetinned copperlugs & termination/fixing of the same including supplyofcrimping type tinned copper lugs & PVC/XLPEcable hoods etc for thefollowing cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 3½ C x 50 mm²
Unit of Measurement (UOM) EA
Quantity 55.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 160
Service code 9017515
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 53 of 144
Supply, Installation and fixing of NON FLP typeCable Terminationstype double compression nickelplated brass cable gland, crimping typetinned copperlugs & termination/fixing of the same including supplyofcrimping type tinned copper lugs & PVC/XLPEcable hoods etc for thefollowing cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 4 C x 10 mm²
Unit of Measurement (UOM) EA
Quantity 5.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 170
Service code 9017516
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Supply, Installation and fixing of NON FLP type
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 54 of 144
Cable Terminationstype double compression nickelplated brass cable gland, crimping typetinned copperlugs & termination/fixing of the same including supplyofcrimping type tinned copper lugs & PVC/XLPEcable hoods etc for thefollowing cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 4 C x 16 mm²
Unit of Measurement (UOM) EA
Quantity 25.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 180
Service code 9017518
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Supply, Installation and fixing of NON FLP typeCable Terminationstype double compression nickel
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 55 of 144
plated brass cable gland, crimping typetinned copperlugs & termination/fixing of the same including supplyofcrimping type tinned copper lugs & PVC/XLPEcable hoods etc for thefollowing cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 7C x 2.5 mm²
Unit of Measurement (UOM) EA
Quantity 55.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 190
Service code 9017562
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Supply, Installation and fixing of NON FLP typeCable Terminationstype double compression nickelplated brass cable gland, crimping typetinned copper
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 56 of 144
lugs & termination/fixing of the same including supplyofcrimping type tinned copper lugs & PVC/XLPEcable hoods etc for thefollowing cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 4 C x 2.5 mm²
Unit of Measurement (UOM) EA
Quantity 100.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 200
Service code 9017563
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Supply, Installation and fixing of NON FLP typeCable Terminationstype double compression nickelplated brass cable gland, crimping typetinned copperlugs & termination/fixing of the same including supply
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 57 of 144
ofcrimping type tinned copper lugs & PVC/XLPEcable hoods etc for thefollowing cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under the scope of Termination work.Size : 3C x 2.5 mm²
Unit of Measurement (UOM) EA
Quantity 50.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 210
Service code 9017523
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Cable Termination (FLP):Supply, Installation andfixing of FLP typeCable Terminationstype doublecompression nickel plated brass cable gland, crimpingtypetinned copper lugs &termination/fixing of the same including supply of
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 58 of 144
crimping type tinnedcopper lugs & PVC/XLPE cablehoods etc for the following cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under thescope of Termination work.Size: 3½ C x 400 mm²
Unit of Measurement (UOM) EA
Quantity 10.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 220
Service code 9017524
Short Description CABLE GLAND INDS SUPPLY SUP INST CABLEG
Long Description
SUPPLYING OF OF 1.1 KV GRADE DOUBLECOMPRESSION, WEATHERPROOF, INDUSTRIALNICKEL PLATED BRASS CABLE GLANDS FORTHE FOLLOWING SIZES OFCABLES; GLANDSSHALL BE COMPLETE WITH DOUBLE SEALCONE GRIP ARRANGEMENTAND PVC HOOD.CONTRACTOR SHALL CHECK CABLEDIAMETER UNDER AND OVERARMOUR, PRIORTO SUPPLY OF GLANDS.
Cable Termination (FLP):Supply, Installation andfixing of FLP typeCable Terminationstype doublecompression nickel plated brass cable gland, crimpingtypetinned copper lugs &termination/fixing of the same including supply of
Tender reference No : 1000251041 System ID : 10801
Tender title : ELECTRICAL REVAMPING JOB AT BUDGEBUDGE
page 59 of 144
crimping type tinnedcopper lugs & PVC/XLPE cablehoods etc for the following cable sizes.NOTE : Contractor to Note that existing Panel forwhich existing cableswill be replaced with new cables ,Gland plates replacement if required, needs to beconsidered under thescope of Termination work.Size: 3½ C x 300 mm²
Unit of Measurement (UOM) EA
Quantity 12.00000
Unit Rate(in Rs. in Fig)
Unit Rate(in Rs. in Words )
Total Amount (in Rs.)
VAT in %
VAT Amount in Rs
Service Tax in % (To be loaded byofficer)
Service Tax Amount in Rs
Total Landed Amount (in Rs.)
Total Landed Amount (in Rs. InWords)
Column name Bidder response
SAP Item No. 230
Service code