Post on 09-Jul-2022
1/9
Tier 4f
Technical data sheet
10010143021.06.2016
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Himec RM 910 REX
FeaturesThe Himec RM 910 REX is a self propelled diesel driven 1-boom lifter for man lifting, charging of explosives and installing works in tunnelling. It consists of the new Normet Rigid Frame Carrier (=R) with M-series Cummins Tier4F engine QSB4.5 (119 kW) and NSB 900 boom.
Boom is controlled from the platform and from the carrier. Working platform REX is a hydraulically ex-tendable platform with patterned plate working surface, safety railings and boom and platform controls on board. Automatic horizontal holding system and platform rotating provide good working flexibility and applicability for most various lifting works.
Pictured machine may include options and additional equipment.
2/9
Tier 4f
Technical data sheet
10010143021.06.2016
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Himec RM 910 REX
NSB 900 BASKET BOOM
2-men basketLifting capacity 1000 kg = 840 kg + 2 personsBasket size• base 2.4 m x 2.4 m • extended 2.4 m x 4.7 mPlatform rotation 340ºBoom lift –20º...+53ºBoom extension 2.4 mMax. Lifting height (basket floor) 9.3 mMax. Vertical reach 11.7 mBoom slew - 30º...+ 30ºMax. Lateral coverage 6.5 mDiesel start/stop (from the basket)Battery operated emergency pump
ENGINE
Liquid cooled turbo charged CUMMINS QSB4.5,119kW/2300 rpm, TIER 4F approved Requires DEF (urea) and ultra-low sulphur diesel (ULSD) (max sulphur content < 15 ppm)
EXHAUST AFTER TREATMENT SYSTEM
EGR ( Exhaust Gas Recirculation), DOC (Diesel Oxidation Catalyst) and SCR (Selective Catalytic Reduction)
TRANSMISSION
Hydrostatic 4-wheel transmissionVariable piston pump 115 cm3
Variable piston motor 160 cm3
Separate stainless steel oil tank 110 L
AXLES
Planetary typeDana 223Rear end axle oscillation +/- 8°Boom end axle fixed
TYRES
12.00 – 20
PERFORMANCE
Max. Horizontal speed (horizontal tunnel) 25 km/hMax speed in 1:7 inclined tunnel 8 km/hMax. Tractive force 113 kN
BRAKES
Service brake; hydraulically powered two-circuitOil-immersed multi-dics brakes in both axles
Safety/Parking brake; spring-activated, hydraulicallyReleased, fail-safe-type brake. Brake test possibility in cabin
STEERING
Four-wheel steering as standardOrbitrol typeIncluding crabwalk
FUEL TANK
Capacity 140 LStainless steel
DEF TANK
Diesel Exhaust FluidCapacity 19 L
HYDRAULIC SYSTEM
Variable displacement pump system190 bar, 95 L/min/2200 rpmHydraulic oil tank capacity 130 LReturn oil filtration 10 μmIndication of level, filtration and temperature
24 VDC ELECTRICAL SYSTEM
Exposed components are min. IP65 standardBattery 2 x 80 AhAlternator 80 AWire harness (self extinquishing) with tinned wires and wa-tertight conduitsLed driving lights• Front end LED lights 2 x 1300 lm• Rear end LED lights 2 x 1300 lmLED directional lights on front and rear sideLED working lights• 4pcs on cabin• 2pcs on carrier
DRIVER’S COMPARTMENT
Open cabin FOPS/ROPS approvedSuspended driver’s seatSeat with retractable lap seat beltSide seating for the driver MID 070 S Multifunctional Display with: • Meters; e.g. speed, RPM, operating hours • Status indicators; e.g. fluid levels, temperatures,
pressures, alarms, faults
GREASING SYSTEM
Centralized grease fittings for the carrier
OTHER
12 kg hand held fire extinquisherStandard symbol labelsHydraulic extendable front support legsHydraulic rear support legs
Technical specification
3/9
Tier 4f
Technical data sheet
10010143021.06.2016
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Himec RM 910 REX
DRIVER’S CABIN
Enclosed cabin, FOPS/ROPSHVAC system
OTHER
Warning lights, 1 unit: • Rotating beacon; red • Rotating beacon; blue
HIGH VOLTAGE SYSTEM
400V/50Hz power pack 690V/50Hz power pack1000V/50Hz power pack
COMPRESSOR
Hydraulically driven compressor 5 m3
FOR ENCLOSED CABIN
CD/Radio system
FOR NSB BASKET BOOM
Safety roof• Lifting capacity 750 kg = 570 kg + 2 persons
FIRE SUPPRESSION SYSTEM
Fogmaker: Manually actuated Fogmaker: Automatically actuatedAnsul: Manually actuatedAnsul: Automatically actuated
GREASING SYSTEM
Automatic lubrication system for carrier and lifter: Lincoln
OTHER
Fast fuel filling system: WigginsOil evacuation kit with sample pointsExtra hand held fire extinguisher (12 kg)Warning lights, 1 unit: • Rotating beacon; amber• Rotating beacon; red • Rotating beacon; blue • Strobe light; white
Text labels in: Fin / En / Por / Swe / Rus / Nor / Ger / Fra / Spa / ItaToolbox and maintenance tools2 wheel chocks with bracketsReversing cameraSpare wheel WLAN connection
Optional equipment Additional equipment
4/9
Tier 4f
Technical data sheet
10010143021.06.2016
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Himec RM 910 REX
LTC services
RECOMMENDED SPARE PARTS FOR EARLY LIFE
Spare parts package: A complete package to make sure your machine runs with optimal uptime up to 1000 opera-tion hours*.
Includes periodical maintenance parts and most critical spare parts related to e.g.: - Engine (e.g. filters, belts)- Chassis (e.g. wiper blades, throttle pedal connector)- Hydraulics (e.g. filters)- Electrics (e.g. sensors, work lights, solenoid coils, contactors)- Boom (e.g. sliding parts, bearings, cylinders, seals, pins)- Compressor, if applicable (e.g. filters)
*) In challenging operating environment 1000h of usage may not be reached with this spare parts package.
EXTENDED WARRANTY
Extended warranty extends the standard warranty period (12 months or 2000 usage hours) up to total 24 months or 3000 usage hours, whichever is reached first.
ELECTRONIC MANUALS ON THE WEB
LinkOne electronic spare parts and instruction manuals
TRAINING AND EXPERTISE SERVICES
Available before and at the equipment delivery – and during the whole equipment life-time!
Product training: Operation and MaintenanceAutomation - NorSmartFoundation of electrics, hydraulics and mechanicsTrouble-shooting
Process & operator improvement audit for:Concrete sprayingChargingScaling
Audit services to improve:Performance, availability, maintenance & repair efficiency, safety, quality, environmental aspects
SERVICE CONTRACTS FOR
Spare parts supplyScheduled inspectionSupervisionScheduled maintenancePreventive maintenance
EQUIPMENT HAND-OVER SERVICES
Start-up training Commissioning
1. Operator training
1.1 Classroom training
No classroom training included in commissioning
General introduction and operation of machine ComprehensiveSafety instructions ComprehensiveUse of manuals ComprehensiveTechnical introduction of equipment ComprehensiveHands-on service and pre-operation checks ComprehensiveControls and driving (starting, driving, stopping, parking) ComprehensiveWork method Comprehensive
1.2 Practical trainingPre-operation checks Comprehensive BasicDriving, starting, stopping, parking Comprehensive BasicPreparing the machine for specific operation conditions Comprehensive Not coveredOperation Comprehensive BasicWashing the machine Comprehensive BasicTroubleshooting Comprehensive Basic
2. Maintenance and repair trainingGeneral operation of machines Comprehensive BasicSymbols of drawings and codes Comprehensive Not coveredUnderstanding hydraulic and electric schematics Comprehensive BasicControl systems Comprehensive BasicFunction of main components (depending on equipment) Comprehensive BasicLocations of components in the machine Comprehensive Not coveredPeriodical maintenance Comprehensive BasicTroubleshooting Comprehensive Not coveredUse of manuals Comprehensive BasicConnection of hydraulic and electrical equipment Comprehensive Not covered
5/9
Tier 4f
Technical data sheet
10010143021.06.2016
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Himec RM 910 REX
Dimensions
SIDE VIEW
Basic machine
DIMENSIONS
Length 11250 mmWidth 2300 mmHeight 3000 mm
TURNING RADIUS
Outer 8700 mmInner 3980 mm
WEIGHT
Operating 22 000 kg
SIDE VIEW
Machine with options and additional equipment
3150
3000
22°
11250
1180 3960 1520250
20°
330036
5060
0
11250
6/9
Tier 4f
Technical data sheet
10010143021.06.2016
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Himec RM 910 REX
BOOM REACH
Dimensions
TOP VIEW
2300
3500
30°
30°
2300
PLAT
FORM
EXT
END
ED 4
600
5300
3000
2250
9250
1168
0
7/9
Tier 4f
Technical data sheet
10010143021.06.2016
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Himec RM 910 REX
BOOM REACH
Dimensions
01234567
FACE
860
0
1104
0
8/9
Tier 4f
Technical data sheet
10010143021.06.2016
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Himec RM 910 REX
TURNING RADIUS
Dimensions
R1000
48°
R3980
R8700
5600
9/9
Tier 4f
Technical data sheet
10010143021.06.2016
Normet OyAhmolantie 6FI-74510 IISALMI, FINLAND
Tel +358 (0) 17 83 241Fax +358 (0) 17 823 606
info@normet.com www.normet.com
Normet reserves the right to change this specification without further notice.
Himec RM 910 REX Machine name and model Discription of power train
Norlifter Engine 97 kW 2500 1/minTransmission H1P-115Misc
0
10
20
30
40
50
60
70
80
90
100
110
120
0 5 10 15 20 25
Trac
tive
effo
rt k
N
Speed km/h
Tractive effort kN
3,5571014 0
10
20
30
40
50
60
70
80
90
100
110
120
5 10 15 20 25Machine weight tn
Gradeability kN
2020
15
10
GON
5
%) o/< 1/X
520
5
10
10
15 76
1525 4
303
5
30
2525
40 2,5
50 2
C:\Users\apa\Documents\TYÖ\TUOTTEET\Nostolaitteet\Rigid frame\Power line\HydstaVetovmacro.xlsm
Tractive efforts
CUMMINS QSF4.5 119kWPerformance curve