Post on 12-Jul-2018
TEC CONTAINER S.A.C/ Tajo, 19 - Pol. Ind. “Las Acacias”
28840 • Mejorada del Campo • Madrid • SpainTel + 34 91 302 16 38
comercial@teccontainer.comwww.teccontainer.com
Intr
od
ucti
on
I Lashing Equipment I 3
Welcometo TEC CONTAINER S.AWe are a company based in Spain, specialized in designand production of equipment for Container Handling &Lashing, General Cargo, Wind Energy and Equipment forPersonnel Security in Terminals and Ports.
• Since 1976, the year in which the company was founded, TEC CONTAINER has supplied products to more than 70 different ports in more than 40 countries all over the world.
• Since 1976, more than 350 new vessels have been originally supplied with the lashing equipment of TEC CONTAINER.
• Since 1976, more than 1500 Spreaders have been delivered to customers in more than 40 different countries, together with a variety of models of Safety Cages, Overheight Frames, Lifting Beams and tailor-made Container Handling Equipment.
For us innovation is nowadays a tradition.
4 I Lashing Equipment I
Intr
od
ucti
on
1976
Foundation
1985
TEC Container (ITALY)
1986
NV Lash TEC (BELGIUM)
1989
First Expansion: New Workshop Facilities
1990
TECNICAS Contentorizaçao(PORTUGAL)
1991
TEC Container FAR EAST (SINGAPORE)
1992-1999
New Agents and Branches in • South Korea• Argentina• Croatia• United Arab Emirates• Greece• Finland• France
Corporate Hits
1976
Foundation and Begining of TEC CONTAINER Technical Office in Madrid.
1984
First Own Produced Lashing Equipment.
1986
Ro-Ro Equipment is introduced in TEC’s Protfolio.
2000
The Handling EquipmentBranch is created.
1985
First Cellular guide and Fully DeckEquiped vessel is delivered by TEC.
1989
First Spreaders are designed, produced and delivered.
Production
Own Design and Own ProductionAfter more than 30 Years of Experience...
I Lashing Equipment I 5
2000
Second Expansion: New Workshop Facilities
2006
Third Expansion: Capital Increase and New Partners in the Company.
2008
New Agents in the Russian Federation
2009
New Agents in Turkey
2010
Fourth Expansion: Brand New Factory and new offices
2005
TEC starts with the production of RollTrailers and Goose-Necks for Ports.
2003
The First Safety Cages are sold to the Main Ports of Spain.
2009
First Contract for Wind Energy Solutions is Signed.
TEC CONTAINER SA has become a reference for Shipowners, Shipyards, Portsand Terminals. Our optimal combination of leading design, quality and experience has awarded us with the recognition of our clients in more than 80countries and within a great variety of industrial sectors.
TEC CONTAINER SA has managed to transform and to adapt itself through these30 years from a locally- based company focused on the Shipping industry to adiversified group with interests in a vast range of industrial sectors. Quality, constant activity in research and development of new standards and our wellknown customer service has taken TEC CONTAINER to the privileged positionwhere actually occupies.
In these 30 Years TEC CONTAINER SA has created a solid net of Agents andBranches all over the world. A great part of our success is due to their qualifiedwork.
In 2010 TEC CONTAINER, to reinforce its strategic plan, will inaugurate new production facilities.
6 I Lashing Equipment I
Intr
od
ucti
on
QualityTEC CONTAINER, S.A. pursues a continuous improvement of the quality of our customers' service, in order to achieve the max-imum level of competitiveness in the branch, based on confidence and customers' integration and loyalty. The Managementof TEC CONTAINER, S.A. promotes the implementation and maintainance of the QUALITY CONTROL SYSTEM based on thestandard norm UNE-EN ISO 9001:2008. The Management of TEC CONTAINER, S.A establishes the basis of this QUALITYCONTROL POLICY as the principal pillars of our organization as follows:
• Guarantee of the customers' satisfaction and even the surpassing of customers' expectations, through a balance between improve-ment of quality and reduction of costs, making them participants in our QUALITY CONTROL SYSTEM .
• Continuous improvement of the services and the processes in TEC CONTAINER, S.A. through establishment and revision of objectives and goals.
• Active participation in the fulfillment of the objectives as a responsibility of all the personnel of TEC CONTAINER, S.A.
• The QUALITY CONTROL POLICY is annually revised and adapted to possible changes. The personnal of TEC CONTAINER, S.A. is informed about the adjustment of the QUALITY CONTROL SYSTEM continually, and the updated information is publicly available.
Always in the front line of innovation
I Lashing Equipment I 7
TECNICAS DE CONTENTORIZAÇAO, LTDDas Rabelas - Lote nº 20 Armazem 2H2830222 Barreiro - PORTUGALTel. +351 21 214 84 90Fax +351 21 214 84 99teccontainer@gmail.com
N.V. LASH TECH Oosterweelsteenweg 58B-2030 Antwerp - BELGIUMTel. +32 3 541 16 28Fax +32 3 541 52 78info@lash-tech.com
MARINE CONSULTANTS 52 rue Vergniaud75013 Paris - FRANCETel. +33 (0) 1 45 89 87 97Fax +33 (0) 1 45 65 36 26marine.consultants.paris@wanadoo.fr
LLS ARMADANab. r. SmolenkaBuilding 19-21 liter «B» 199048 SAINT PETERSBURGRUSSIAN FEDERATIONTel. +7 (812) 309 11 46Fax +7 (812) 968 01 75armadaspb1@mail.ru
CERTEX SVENSKA AB Visiting adr Lundby Hamngata 26, 417 55 Gothenburg Box 8713S-40275 - Gothenburg - SWEDENTel. +46 31 50 86 50Fax +46 31 23 24 90Mikael.Jonsson@certex.netAnnika.carlstedt@certex.netMarine.goteborg@certex.net
TEC CONTAINER, SRLVia Fieshi, 1/716121 Genova - ITALYTel. +39 010 542 523Fax +39 010 553 11 42teccontainer@teccontainer.it
YEKE DENIZCILIK ASEvliya Celebi Mah. Rauf Orbay Cad.Ak ls Merkezi NO:33,34940 Tuzla Istanbul TURKIYETel. +90 216 446 1938Fax +90 216 446 1939info@yekedenizcilik.com.tr
JUAN CARLOS ISAIAViamonte, 448 - 9º piso1053 Buenos Aires - ARGENTINATel. +54 11 4 311 35 18+54 11 4 311 18 85Fax +54 11 43 11 35 65jcisaia@arnet.com.ar
SHIPSAFE MARINE EQ / SAFETY GEAR20-22 Zosimadon Str.Piraeus 185 31, GREECETel. +30 210 422 2845Fax +30 210 422 2844shipgear@otenet.net
JEWON CORPORATION485-5, Gupyung-Dong, Saha-Ku,Busan, KOREATel. +82 51 261 7638Fax +82 51 261 7628inbox@jewonkor.com
ADAMALLYSPost box 4684Deira - Dubai - UNITED ARAB EMIRATESTel. +97 14 324 33 43Fax +97 14 324 33 45saifuddin.hassanally@adamallys.com
IMEX MARINE D.O.O.Dragonja, 1Pula 52100 CROATIATel. +385 52 502 366Fax +385 52 502 330info@imex-marine.com
TEC CONTAINER S.A.C/ Tajo 19 & 13 • Pol. Industrial “Las Acacias” • 28840 • Mejorada del Campo Madrid (Spain)Tef +34 91 302 16 38 • Fax +34 91 766 42 79 • teccontainer@teccontainer.com • www.teccontainer.com
8 I Lashing Equipment I
Intr
od
ucti
on TEC R+D
• Do you need special solutions moving, lifting or securing your goods? • Are you looking for a device to make easier your loading / unloading operations? • Are you looking for a safer solution in your handling operations?
In brief, do you consider that there could be another way to handle, lift, store, load and unload your goods to reduceoperational time, cycles, risk and finally… costs?
TEC CONTAINER R+D Department is ready to help you.
TEC CONTAINER designs and produces exactly what our customers require. We have invented tailor-made solutions for hun-dreds of customers. We boast of en extensive catalogue of handling solutions.
We believe that service has to be linked with the special “added value”. For us, TEC CONTAINER starts in our R+D projects.For more than 30 years now we have been in constant contact with our clients, assisting them and solving their necessities.Our goals: To increase our clients’ productivity and reliability using cutting-edge technology.
All our products are supported by:• TEC & CE Certificate• Other Certificates• Service Manuals and Instructions.• Informative Plates• Spare parts Guides.• Manteinance Guides.
Please contact the R+D Department in tecnico@teccontainer.com
Index
1
2
3
1. Container lashing equipment
1.1. Fixed equipment1.1.1. Fittings on Deck
Raised Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Dovetail Foundations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Lashing Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 D-rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.1.2. Fittings in HoldsFlush Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Flush Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.1.3. Weldable Cones + Lashing PotsWeldable Cones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Lashing Pots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1.2.Loose equipment1.2.1. Base Stacking
Single + Turnfoot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Circular Breech Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Dovetail Twistlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Dovetail Twistlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
1.2.2. Intermediate StackingIntermediate Stackers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Manual Twistlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Turnfoot Twistlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Midlock Salt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
1.2.3. Intermediate Stacking 2Self-Hanging Stackers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Eye + Fixed Head Ext . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
1.2.4. Lashing Bars + TurnbucklesEye / Swivel Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2. Roro lashing equipment
2.1.Fixed Equipment2.1.1. Foundations
Multipurpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Elephant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Flush 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Flush 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
2.1.2. Lashing EyesStrong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.2.Loose Equipment2.2.1. Sets for Car / Truck Lashing
Lashing Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Complete Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Turnbuckles for Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Turnbuckles for Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Tension Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.2.2. Trailers HorsesCar / Truck Chocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Varios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3. Miscelaneous3.1. Iso corners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 503.2. Twsitlocks for trailers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 3.3. Extension + elevating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Containe
rLashing Equipment
1.1.1. FITTINGS ON DECK
Fixed Equipment1.1.
12 I Lashing Equipment I
Raised Sockets
FE-72-1 FE-72-2 (25)
FE-72-2 (76)
Standard height= 110 mm.
FE-72-3 (80)
Containe
rLashing Equipment
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : HIGH TENSILE STEELFINISH: PAINTEDMIN BREAK LOAD: 50Tn
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.Distance BetweenContainers
8,00 160 * 160 * 110 ------17,00 160 * 363 * 110 2519,00 160 * 436 * 110 8019,00 160 * 458 * 110 76
FE-72-1FE-72-2(25)FE-72-2(80)FE-72-3(76)
1.1.1. FITTINGS ON DECK
Fixed Equipment“The world is our business”
I Lashing Equipment I 13
Dovetail Foundations
FE-03-1 FE-03-2 (25)
FE-03-2 (80)
FE-28-1 FE-28-2 (25)
FE-03 to be used with CB-25-1FE-28 to be used with CB-34-1
Containe
rLashing Equipment
MATERIAL : CAST STEELFINISH: NATURAL COLOR / PAINTEDMIN BREAK LOAD: 36Tn
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.Distance BetweenContainers
4,90 238 * 178 * 32 ------6,00 441 * 178 * 32 257,50 498 * 178 * 32 804,90 238 * 178 * 40 -----6,00 441 * 178 * 40 25
FE-03-1FE-03-2(25)FE-03-2(80)FE-28-1FE-28-2(25)
1.1.1. FITTINGS ON DECK1.1.Fixed Equipment
14 I Lashing Equipment I
Lashing Plates
FA-25-1 FA-25-2
FA-25-3
Containe
rLashing Equipment
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : HIGH TENSILE STEELFINISH: NATURAL COLOR / PAINTEDMIN BREAK LOAD: 50Tn
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm. Hole Diammm.
1,80 160 * 112 * 25 553,60 320 * 112 * 25 555,40 480 * 112 * 25 55
FA-25-1FA-25-2FA-25-3
1.1.1. FITTINGS ON DECK “The world is our business”
Fixed Equipment
I Lashing Equipment I 15
D-Rings
FA-01-1 (36) FA-01-1C (36)
FA-01-1 (50)
FA-13-2C FA-23
Containe
rLashing Equipment
MATERIAL : DROP FORGED + STEEL PLATE FOUNDATIONFINISH: NATURAL COLOR / PAINTEDMIN BREAK LOAD: ------
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.MinimunBreakingLoad Tn
2,90 203 * 123 * 23 363,00 188 * 150 * 24 364,50 234 * 200 * 26 506,50 Diam 225 * 50 3613,20 Diam 345 * 54 36
FA-01-1(36)FA-01-1C(36)FA-01-1(50)FA-13-1FA-13-2C
1.1.2. FITTINGS IN HOLD1.1.Fixed Equipment
16 I Lashing Equipment I
Flush Sockets
FE-07A-1 FE-07A-2 (25)
FE-07A-2 (80) FE-07A-3 (76)
FE-07A-4 (25) FE-07A-4 (80)
Containe
rLashing Equipment
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : WELDABLE STEELFINISH: PAINTEDMIN BREAK LOAD: 50Tn
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.Distance BetweenContainers
6,00 Diam 185 * 78 -----16,00 388 * 185 * 78 258,00 443 * 185 * 78 8019,00 465 * 185 * 78 7643,00 465 * 388 * 78 2546,00 465 * 443 * 78 80
FE-07A-1FA-07A-2(25)FA-07A-2(80)FA-07A-3(76)FA-07A-4(25)FA-07A-4(80)
1.1.2. FITTINGS IN HOLD “The world is our business”
I Lashing Equipment I 17
Flush Sockets
FE-38B-1 FE-38E-1
FE-38E-2 (80) FE-38E-3 (76)
FE-38E-4 (80) FE-17-1 A
Fixed Equipment
Containe
rLashing Equipment
MATERIAL : WELDABLE STEELFINISH: PAINTEDMIN BREAK LOAD: 30Tn
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.Distance BetweenContainers
9,00 Diam 225 * 78 ----24,00 355 * 285 * 108 ----43,00 355 * 490 * 108 8045,00 635 * 285 * 108 7692,00 635 * 490 * 108 807,00 Diam 185 * 120 ----
FE-38B-1FE-38E-1FE-38E-2(80)FE-38E-3(76)FE-38E-4(80)FE-17A-1
1.1.3. WELDABLE CONES + LASHING POTS1.1.Fixed Equipment
18 I Lashing Equipment I
Weldable Cones
CB-13-1 CB-13-1-A
CI-1-1K
Containe
rLashing Equipment
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : CAST STEELFINISH: NATURAL COLOR / PAINTEDMIN BREAK LOAD: 42Tn
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
3,50 150 * 160 * 101,60 Diam 100 * 900,50 Diam 100 * 90
CB-13-1CB-13-1ACI-1-1K
1.1.3. WELDABLE CONES + LASHING POTS “The world is our business”
I Lashing Equipment I 19
Lashing Pots
FA-03-1C FA-03-1E
Fixed Equipment
Containe
rLashing Equipment
MATERIAL : WELDABLE CAST STEELFINISH: NATURAL COLOR / PAINTEDMIN BREAK LOAD: -----
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.MinimunBreakingLoad Tn
2,50 150 * 90 * 74 1215,00 257 * 135 * 132 40
FA-03-1CFA-03-1E
1.2.1. BASE STACKING1.2.Loose Equipment
20 I Lashing Equipment I
Single + Turnfoot
CB-05-1F CB-12-1
Containe
rLashing Equipment
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : DUCTILE IRONFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: 42Tn
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
2,50 To be used in ISO Holes4,00
CB-05-1FCB-12-1
1.2.1. BASE STACKING “The world is our business”
I Lashing Equipment I 21
Circular + Breech Base
CB-06-01 CB-21-1C
CB-21-10C (D) CB-21-10C (L)
Containe
rLashing Equipment
MATERIAL : HOUSING : DUCTILE IRON; CONE: DROP FORGEDFINISH: HOT DEEP GALVANIZED
MIN BREAK LOAD:
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.MinimunBreakingLoad Tn
4,00 To be used in Circular Bases 427,00 To be used with FE-41 276,00 To be used with FE-40 276,00 To be used with FE-40 27
CB-06-1CB-21-1CCB-21-10C(D)CB-21-10C(L)
1.2.1. BASE STACKING1.2.Loose Equipment
22 I Lashing Equipment I
Dovetail Twistlocks
CB-25-1G CB-25-1L
CB-34-1L
Containe
rLashing Equipment
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : HOUSING : DUCTILE IRON; CONE: DROP FORGEDFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: 30 Tn
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm. Dimensionsmm
7,00 To be used with FE-03 175 * 140 * 1287,00 To be used with FE-03 176 * 140 * 1297,50 To be used with FE-28 176 * 160 * 136
CB-25-1GCB-25-1LCB-34-1L
CB-25-1 to be used with FE-03CB-34-1 to be used with FE-28
1.2.1. BASE STACKING “The world is our business”
Loose Equipment
I Lashing Equipment I 23
Dovetail Twistlocks
CB-41-1L CB-42-1
CB-21-1D CB-21-1L
Containe
rLashing Equipment
MATERIAL : HOUSING : DUCTILE IRON; CONE: DROP FORGEDFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: 30 Tn
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm. Dimensionsmm
8,00 To be used with FE-28 175 * 160 * 1299,00 To be used with FE-28 175 * 160 * 1297,00 To be used with FE-03 176 * 130 * 1197,00 To be used with FE-03 176 * 130 * 119
CB-41-1LCB-42-1CB-21-1DCB-21-1L
1.2.2. INTERMEDIATE STACKING1.2.Loose Equipment
24 I Lashing Equipment I
Intermediate Stackers
CI-1-1F CI-1-2 (25)
CI-1-2 (80) CI-1-3 (76)
Containe
rLashing Equipment
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : CONE: DROP FORGEDFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: -----
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.MinimunBreakingLoad Tn
3,00 130 * 125 426,50 325 * 150 647,00 380 * 150 648,00 440 * 150 20
CI-1-1FCI-1-2(25)CI-1-2(80)CI-1-3(76)
1.2.2. INTERMEDIATE STACKING “The world is our business”
I Lashing Equipment I 25
Manual Twistlocks
CI-5-1D CI-5-1L
CI-5-PA
Containe
rLashing Equipment
MATERIAL : HOUSING : DUCTILE IRON; CONE: DROP FORGEDFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: 40
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
6,00 120 * 100 * 1726,00 120 * 100 * 172
CI-5-1LCI-5-1D
1.2.2. INTERMEDIATE STACKING1.2.Loose Equipment
26 I Lashing Equipment I
Turnfoot Twistlocks
CI-21-1 (D) CI-21-1 (L)
Containe
rLashing Equipment
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : HOUSING : DUCTILE IRON; CONE: DROP FORGEDFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: 30
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
6,00 145 * 113 * 1696,00 145 * 113 * 169
CI-21-1DCI-21-1
1.2.2. INTERMEDIATE STACKING “The world is our business”
I Lashing Equipment I 27
Midlock Satl
CI-15 A-1 CI-45-1
CI-45-1G CI-45-P
Containe
rLashing Equipment
MATERIAL : HOUSING : DUCTILE IRON; CONE: DROP FORGEDFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: 50T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
178 * 120 * 1907,00 163 * 120 * 2247,00 163 * 120 * 224N/A Upon request Aluminium
CI-15A-1CI-45-1CI-45-1GCI-45P
1.2.3. INTERMEDIATE STACKING 21.2.Loose Equipment
28 I Lashing Equipment I
Self - Hanging Stackers
CI-50-1 CI-52
Containe
rLashing Equipment
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : HOUSING : DUCTILE IRON; CONE: DROP FORGEDFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: 42T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
4,00 150 * 118 * 1163,00 105 * 112 * 85
CI-50-1CI-52
1.2.3. INTERMEDIATE STACKING 2 “The world is our business”
I Lashing Equipment I 29
Eye + Fixed Head Ext
BR-05 BR-04
Loose Equipment
Containe
rLashing Equipment
MATERIAL : HIGH TENSILE STEELFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: 50T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
N/A Length upon RequestN/A Length upon Request
BR-05BR-04
1.2.4. LASHING BARS
Knob End
BR-31C TE-31-50-2
1.2.4. LASHING BARS + TURNBUCKLES1.2.Loose Equipment
30 I Lashing Equipment I
Eye / Swivel Head
BR-32 B TE-26-2
TE-1-50-2
Containe
rLashing Equipment
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : HIGH TENSILE STEELFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: 50T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.Distance BetweenContainers
N/A Length upon Request14,00 Min 900 / Max 140015,00 Min 950 / Max 1350
BR-32BTE-26-2TE-1-50-2
I Lashing Equipment I 31
1.2.4. LASHING BARS + TURNBUCKLES “The world is our business”
Loose Equipment
Containe
rLashing Equipment
MATERIAL : HIGH TENSILE STEELFINISH: HOT DEEP GALVANIZEDMIN BREAK LOAD: 50T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
3,00 25 / 80 PC-1
Bridge
PC-1
RORO
Lashing Equipment
RORO
Lashing Equipment
2.1.1. FOUNDATIONS
RORO
Lashing Equipment
2.1.Fixed Equipment
34 I Lashing Equipment I
Multipurpose
FA-67H FA-67G
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : WELDABLE STEELFINISH: PAINTED / HOT DIP GALVANIZEDMIN BREAK LOAD:
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm. Min BreakingLoad T
4,00 Diam 158 * 57 184,00 Diam 153 * 57 10
FA-67HFA-67G
2.1.1. FOUNDATIONS
RORO
Lashing Equipment
“The world is our business”
I Lashing Equipment I 35
Elephant
FA-06-1 FA-06-01
FA-06-01 (58) FA-66A
MATERIAL : WELDABLE HIGH TENSILE STEELFINISH: PAINTED / HOT DIP GALVANIZEDMIN BREAK LOAD: 20T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
4,00 Diam 250 * 562,00 Diam 230 * 582,20 Diam 230 * 580,50 145 * 113 * 169
FA-06-1FA-06-1BFA-06-1B (58)FA-66A
2.1.1. FOUNDATIONS
RORO
Lashing Equipment
2.1.Fixed Equipment
36 I Lashing Equipment I
Flush 1
FA-08-1G FA-08-1J
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : WELDABLE HIGH TENSILE STEELFINISH: PAINTED / HOT DIP GALVANIZEDMIN BREAK LOAD: 20T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
10 280 * 678,5 225 * 58
FA-08-1GFA-08-1J
2.1.1. FOUNDATIONS
RORO
Lashing Equipment
“The world is our business”
I Lashing Equipment I 37
Flush 2
FE-38-1E FE-38-2E
FE-38-3E FE-38-4E
MATERIAL : WELDABLE HIGH TENSILE STEELFINISH: PAINTED / HOT DIP GALVANIZEDMIN BREAK LOAD: 30T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
24,00 355 * 285 * 10846,00 355 * 490 * 10846,00 635 * 285 * 10892,00 635 * 490 * 108
FE-38-1EFE-38-2EFE-38-3EFE-38-4E
2.1.2. LASHING EYES
RORO
Lashing Equipment
2.1.Fixed Equipment
38 I Lashing Equipment I
Strong
FA-01-1 (36) FA-01-1C (36)
FA-01-1 (50) FA-10-1
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : DROP FORGED + STEEL PLATE FOUNDATIONFINISH: NATURAL COLOR / PAINTEDMIN BREAK LOAD: ------
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.MinimunBreakingLoad Tn
2,9 203 * 123 * 23 363,0 188 * 150 * 24 364,5 234 * 200 * 26 5024,0 Diam 355 * 50 50
FA-01-1(36)FA-01-1C(36)FA-01-1(50)FA-10-1
2.1.2. LASHING EYES
RORO
Lashing Equipment
“The world is our business”
I Lashing Equipment I 39
Light
FE-50-1 FA-57-1
FA-57-2A
MATERIAL : DROP FORGED + STEEL PLATE FOUNDATIONFINISH: NATURAL COLOR / PAINTEDMIN BREAK LOAD: ------
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.MinimunBreakingLoad Tn
1,00 127 * 120 * 60 200,50 100 * 75 * 50 41,00 100 * 24 4
FA-50-1FA-57-1FA-57-2A
2.2.1. SETS FOR CAR / TRUCK LASHING
RORO
Lashing Equipment
2.2.Loose Equipment
40 I Lashing Equipment I
Lashing Belts
TE-6F TE-6M (50)
TE-6M (75)
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : POLYPROPILENEFINISH: ---MIN BREAK LOAD: ---
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.MinimunBreakingLoad Tn
0,50 1800 * 25 1,61,50 9000 * 50 51,70 3500 * 75 10
TE-6FTE-6M (50)TE-6M (75)
2.2.1. SETS FOR CAR / TRUCK LASHING
RORO
Lashing Equipment
“The world is our business”
I Lashing Equipment I 41
Components
GE-2 GE-2B
GE-14
MATERIAL : HIGH TENSILE STEELFINISH: PAINTEDMIN BREAK LOAD: 20T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
0,50 Diam 600,50 Diam 600,50 Length 173
GE-2GE-2BGE-14
GE-2 & GE-2B to be used with FA-06 & FA-08 or equivalent
2.2.1. SETS FOR CAR / TRUCK LASHING
Loose Equipment
RORO
Lashing Equipment
2.2.
42 I Lashing Equipment I
Complete Sets
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : HIGH TENSILE STEEL GRADE 80FINISH: PAINTEDMIN BREAK LOAD: 20T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
N/A Diam 13, Length upon RequestN/A Diam 13, Length upon RequestN/A Diam 13, Length upon Request
CD-30CD-40CD-130
CD-30 (20T)
CD-130
CD-40 (20T)
2.2.1. SETS FOR CAR / TRUCK LASHING
RORO
Lashing Equipment
“The world is our business”
I Lashing Equipment I 43
Turnbuckles for Chains
MATERIAL : HIGH TENSILE STEELFINISH: HOT DIP GALVANIZEDMIN BREAK LOAD: 20T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
6,20 Min 470 / Max 6206,20 Min 510 / Max 6008,50 Stroke 2508,50 Stroke 250
TE-14-0TE-14-1TE-45-20-0TE-45-20-1
TE-14-0 TE-14-1
TE-45-20.0 TE-45-20.1
2.2.1. SETS FOR CAR / TRUCK LASHING
RORO
Lashing Equipment
2.2.Loose Equipment
44 I Lashing Equipment I
Turnbuckles for Chains
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : HIGH TENSILE STEELFINISH: HOT DIP GALVANIZEDMIN BREAK LOAD: 20T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
7,00 Min 570 / Max 7707,00 Min 570 / Max 7708,00 Min 570 / Max 770
TE-4-20-0TE-4-20-1TE-4-20-6
TE-4-20.0 TE-4-20.1
TE-4-20.6
2.2.1. SETS FOR CAR / TRUCK LASHING
RORO
Lashing Equipment
“The world is our business”
I Lashing Equipment I 45
Tension Levers
MATERIAL : HIGH TENSILE STEELFINISH: HOT DIP GALVANIZEDMIN BREAK LOAD: 20T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
5,00 5185,00 600
TE-3-20-0TE-3-20-1
TE-3.20.0 TE-3.20.1
2.2.2. TRAILERS HORSES
Loose Equipment
RORO
Lashing Equipment
2.2.
46 I Lashing Equipment I
Car / Truck Chocks
CL-9 CL-10
CW-1 CW-2
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : RESISTANT OIL RUBBER ANTI SKIDFINISH: ---MIN BREAK LOAD:---
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
1,50 155 * 120 * 934,50 270 * 140 * 1531,50 170 * 94 * 994,50 242 * 179 * 167
CL-9CL-10CW-1CW-2
2.2.2. TRAILERS HORSES
RORO
Lashing Equipment
“The world is our business”
I Lashing Equipment I 47
Varios
CT-4D CT-23
MATERIAL : STRUCTURAL STEELFINISH: PAINTED
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.MinimunBreakingLoad Tn
120,00 1420 * 1250 * 650 80130,00 1500 * 1240 * 650 120
CT-4DCT-23
Miscelane
ous
Miscelane
ous
Miscelane
ous
3.1. Iso Corners
50 I Lashing Equipment I
CR-05
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : CONE: DROP FORGEDFINISH: PAINTEDMIN BREAK LOAD: In accordance with ISO 1161
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
11,00 In accordance with ISO 1161CR-05
Miscelane
ou
“The world is our business”
I Lashing Equipment I 51
TL-10 TL-14
TL-16
3.2.Twisitlocks for Trailers
MATERIAL : HOUSING : DUCTILE IRON; CONE: DROP FORGEDFINISH: CONE GALVANIZED, HOUSING PAINTEDMIN BREAK LOAD: 8T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.
4,00 330 * 1456,004,00 183 * 170
TL-10TL-14TL-16
Miscelane
ous
3.3.Extension + Elevating
52 I Lashing Equipment I
EC-13 GE-34C-1
GE-2 GE-2B
GE-11 GE-14
This document must not be copied without TEC CONTAINER written permission and the contents thereof must not be imparted to a thirt party nor be used forany unauthorized purpose. Contravention will be prosecuted. THIS DRAWING IS VALID ONLY FOR COMMERCIAL PURPOSEProduct Information is subject to ammendment / modification without previous notifications
MATERIAL : HIGH TENSILE STEELFINISH: PAINTED / HOT DEEP GALVANIZEDMIN BREAK LOAD: 20T
All Items are approved by major classification societies, Other dimensions & finishing upon request
Model. Weight Kg. Dimesions mm.Distance BetweenContainers
N/A Length upon Request0,40 Length 1730,50 Diam 600,50 Diam 607,00 Length 2707,00
EC-13GE-14GE-2GE-2BGE-11GE-34C-1
© G
rupoA
DV