Post on 05-Apr-2018
8/2/2019 T/C Dimension : Quick Start Guide Manual
1/5
Tis Quick Start Guide is not a substitute for te Dimension rifle safety and instruction manual. You must read te manual carefully and in its ent
8/2/2019 T/C Dimension : Quick Start Guide Manual
2/5
SERIES LOC PARTS: Bolts and magazine
groups (magazine and ousing) fit any ca
in a Series: A, B, C or D.* Bolts are stamp
wit Series letters for easy identificationFor example, a Series A bolt fits .204 Rug
and .223 Rem calibers. A magazine group
stamped C fits .270 Win and .30-06 Sprg
(See adjacent table)
LOC stocks, receivers, brid
used wit any Ser
Tanks for coosing te revolutionary Dimension bolt-action platform. Its called a platform
because you can cange components and calibers to unt any game animal in Nort America.
Tis guide will sow you ow to cange components in less tan 3 minutes. You can also
watc a demonstration video at www.DimensionRifle.com. Te secret to te unique capabilityin Dimension is our Locking Optimized Components (LOC) System. It allows you to cange
Dimension components and calibers quickly and guarantees MOA accuracy - 3 sots into a
one-inc group at 100 yards.
ThE LOC SYSTEM consists of 7 parts a universal stock and receiver tat accept multiple
barrels, magazine groups (magazine and ousing), bolts and bridge scope mounts. Dimension
and tools work wit all Dimension rifles. LOC components are sold in color-coded packages.
LOC parts are stamped Series A, B, C or D. Te package colors elp you coose te rigt
components at te store. Te letters elp you matc components once you get tem ome.
UNIVERSAL LOC PARTS: All LOC stocks, receivers, optional bridge scope mounts and and
tools are universal. Tey fit all Dimension rifle components: Series A, B, C and D.
8/2/2019 T/C Dimension : Quick Start Guide Manual
3/5
2 remove StoCk
Use Allen wrench on leverage tool or torque
tool to loosen receiver screws
Lift receiver and barrel off
Remove magazine housing from stock
1 remove Bolt
Open bolt, rotate it up and
back until it stops
Push in and hold the bolt release
Slide bolt handle back and
rotate to te left
BoltRelease
Allen Wrenc
LOC Leverage Tool
FrontReceiver
Screw
Magazinehousing
Safety firSt! Point te rifle in a safe direction.
Remove te magazine, open te bolt and inspect te
breec to be certain tere are no cartridges in te rifle. Rear MountScrew
Bridge ScopeMount
Leveragehandle hole
8/2/2019 T/C Dimension : Quick Start Guide Manual
4/5
5
6
attaCh torque tool,
looSen torque Collar
Insert torque tool into L hole
in leverage tool
Align gear teeth on torque tool
wit gear teet on torque collar
Hold leverage tool and rotate
torque tool until torque collar loosens
Remove torque tool and leverage tool
remove torque Collar,
remove Barrel
Unscrew loosened torque collar by hand
Pull on barrel and receiver, while twisting
Torque Collar
Gear Teet
ReceiverSlot
Barrel AlignmentPin
LOC Torque Tool
holes inLeverage Tool
SeriesLetter
L (Loosen)ole
8/2/2019 T/C Dimension : Quick Start Guide Manual
5/5
9
10
re-attaCh leverage tool, torque tool
Insert torque tool into T hole in leverage tool
Hold leverage tool and rotate torque tool until torque collar
tightens and torque tool makes an audible click
Avoid getting pinched when bringing the handles together
re-attaCh Bridge SCope mount(if equipped wit tis optional accessory)
Tighten the bridge mount lock screw
wit te torque tool, to assure
repeatable accuracy
Caution: Only use torque tool to tigten screws.Over-tigtening wit leverage tool can damage tool.
inSert properly lettered
magazine houSing into StoCk
11
13 inSert Bolt, Clo Turn bolt andle str
Push bolt release in
Push bolt forward,
Let go of bolt releas
C: Te use of tools to cange p
pinced as parts come togeter. Be c