Post on 24-Nov-2021
— System pro E energy PRIMOLow voltage distribution board for residential application
3 SYSTEM PRO E ENERGY PRIMO | LOW VOLTAGE DISTRIBUTION BOARD FOR RESIDENTIAL APPLICATION
— PRIMO is a new range of distribution boards suitable for residential and commercial applications meeting latest market requirements.
SYSTEM PRO E ENERGY PRIMO | LOW VOLTAGE DISTRIBUTION BOARD FOR RESIDENTIAL APPLICATION2
SYSTEM PRO E ENERGY PRIMO | TABLE OF CONTENTS
— Table of contents
Introduction
General characteristics
Technical properties
System description
Ordering details
Dimensions Details
04-04
05-05
06-06
07-10
11-15
16-17
3
SYSTEM PRO E ENERGY PRIMO | LOW VOLTAGE DISTRIBUTION BOARD FOR RESIDENTIAL APPLICATION4
—Introduction
PRIMO boards are available in multi-row type, way type, and solution for metering. The range of row type is up to 4 rows – 48 modules, and up to 16 ways for the way type, in addition to 4 sizes for metering type.
5SYSTEM PRO E ENERGY PRIMO | GENERAL CHARACTERISTICS
—General characteristicsConstruction characteristics
The construction characteristics of the series guarantee practical installation and versatility.
Reversible DoorPRIMO system comes withreversible doors, the door can be hinged either to the left or right side depending upon the installer convenience.
Top and Bottom knockoutsThe system is designed providing 3 different sizes knockouts on both top and bottom.
Wide knockouts at both sidesThe system is providingaccessibility of cable on both sides via wide rectangle knockouts.
Delivered with N and PE barsPRIMO system is delivered with Neutral and Earth bars providing holes for each outgoing
6 SYSTEM PRO E ENERGY PRIMO | LOW VOLTAGE DISTRIBUTION BOARD FOR RESIDENTIAL APPLICATION
—Technical properties
Standard IEC BS EN 61439 -1 &-3
Max. load 125 amps
Max. voltage 230 / 415 V ac, 50 / 60 Hz
Range Row type
No. of rows 1, 2, 3, and 4 rows
No. of modules 6, 10, 12, 24, 36 and 48 modules
Way type
No. of ways 4, 6, 8, 12, and 16 ways
Metering type
No. of meters 3Ph and 1Ph Conventional and Electronic meters
Degree of protection IP 41
Enclosure material Cold rolled sheet steel, Box and cover 1 mm
Enclosure finish Gray, RAL 7035
7SYSTEM PRO E ENERGY PRIMO | SYSTEM DESCRIPTION
—System descriptionWay type
Knockouts at both sides
Top and bottom knockouts
Depth adjustment facility Thin cover to provide leveling with installation wall
Neutral Terminal
Door can be hinged on the right or left side
Earth Terminal
8 SYSTEM PRO E ENERGY PRIMO | LOW VOLTAGE DISTRIBUTION BOARD FOR RESIDENTIAL APPLICATION
—System descriptionVertical type
Knockouts at both sides
Door can be hinged on the right or left side
Thin cover to provide leveling with installation wall
Top and bottom knockouts
Depth adjustment facility
Neutral Terminal
Earth Terminal
Low Voltage Consumer Units& Distribution Boards
General
Consumer UnitsCombyHousemaster compact
Distribution BoardsProtecta compactProtecta compact accessoriesProtecta compact pan assembliesMini Center compactMounting kits for compact
Spare parts and general accessoriesDimensional details
Contents
1SKC802015C0205
2/3
45/6
7889
10/11
1213/16
1
Consumer Units& Distribution Boards
Reversible door
Quick and easy doorchange from left hand hingeto right hand hinging
2
Consumer Units & Distribution BoardsGeneral
1SKC802015C0205
Features
All ABB consumer units incorporate uniquedesign features making installation, modificationan easy operation and less time consuming.
The ABB range of sheet steel consumer units and distribution boards aredesigned for safety, reliability and availability in the electrical buildinginstallation.Complying to IEC 439 - 3, BS EN 60439 - 3
External earth stud
Quick & Easy
Removal or change of glandplates and fixing of top /bottom extention boxes isquick & easy
1 2 3
Easy handling for the user,all screws Pozidrive 2.
Type Test Certification
31SKC802015C0205
Consumer Units & Distribution BoardsGeneral
Robust spring loaded doorcatch with key lock
Terminals
Large 25 mm2 earth andneutral terminals deliveredin the open position.
Connection options
The TP&N distributionboards accept a variety ofincoming devices, isolator,miniature circuit breaker,residual current device,MCCB or direct cableconnection.The incoming devices areconnected to the busbar viavarious connection kits.
Front facia plate providesneat & attractive cover forall incomer options
Quick & easy electricalsolutions for variousinstallations.
4
1SKC 015 001 F0001
Consumer UnitsCombyOrdering details
For flush mounting
276276276276
Weightkg
No. ofrows
Ordering detailsType Code Type No.
xxxx
xxxx
ECT 107 FECT 110 FECT 116 FECT 120 F
1SKB 107 932 C00011SKB 110 932 C00011SKB 116 932 C00011SKB 120 932 C0001
88888888
2.32.83.54.3
1111
7101620
No. ofmodules
229283386460
For surface mounting
256256256256
Weightkg
DimensionsH x W x D mm
No. ofrows
No. ofmodules
Ordering detailsType Code Type No.
xxxx
xxxx
ECT 107 SECT 110 SECT 116 SECT 120 S
1SKB 107 632 C00011SKB 110 632 C00011SKB 116 632 C00011SKB 120 632 C0001
209263366440
88888888
2.22.63.24.1
1111
7101620
DimensionsH x W x D mm
Plastic flap
Steel flapFor surface mounting
256256256256
Weightkg
No. ofrows
No. ofmodules
Ordering detailsType Code Type No.
xxxx
xxxx
ECS 107 DSECS 110 DSECS 116 DSECS 120 DS
1SKB 107 632 C00021SKB 110 632 C00021SKB 116 632 C00021SKB 120 632 C0002
209263366440
110110110110
2.83.44.44.8
1111
7101620
DimensionsH x W x D mm
For flush mounting
276276276276
Weightkg
No. ofrows
No. ofmodules
Ordering detailsType Code Type No.
xxxx
xxxx
ECS 107 DFECS 110 DFECS 116 DFECS 120 DF
1SKB 107 932 C00021SKB 110 932 C00021SKB 116 932 C00021SKB 120 932 C0002
229283386460
110110110110
2.93.64.75.0
1111
7101620
DimensionsH x W x D mm
ApplicationComby consumer units are designedto suit installations in domestic andcommercial installations, easy toinstall, attractive and highly reliable.Fitted with either sheet steel flap orclear plastic flap for visualinspection of components.Complete with neutral and earthterminals and din rail.
Technical DataStandard : IEC 439-1&3, BS 60439-1&3Max. load : 100 ampsMax. voltage : 230 V ac, 50 HzRange : 7,10,16 and 20 modulesDegree of protection : IP 30Enclosure material : Cold rolled sheet steel
Box and cover 1 mm(Aluzinc steel on request)
Enclosure finish : Gray, RAL 7035
Comby Range
1SKC 015 002 F0001
1SKC 015 009 F0001
1SKC802015C0205
51SKC802015C0205
Isolator (E202/100A) IncomerWeightkg
No. ofways
Ordering detailsType Code Type No.
xxxxx
xxxxx
HSMS 04CHSMS 07CHSMS 11CHSMS 16CHSMS 20C
1SKB 106 142 C40011SKB 109 142 C40011SKB 113 142 C40011SKB 118 142 C40011SKB 122 142 C4001
155210282368440
110110110110110
2.43.13.74.75.1
47111620
256256256256256
DimensionsH x W x D mm
RCCB (F202AC/100/0.03A) Incomer, for HSRC 04C (F202AC/80/0.03A)Weightkg
No. ofways
Ordering detailsType Code Type No.
xxxxx
xxxxx
HSRC 04CHSRC 07CHSRC 11CHSRC 16CHSRC 20C
1SKB 106 142 C60011SKB 109 142 C60011SKB 113 142 C60011SKB 118 142 C60011SKB 122 142 C6001
155210282368440
110110110110110
2.53.23.84.85.2
47111620
256256256256256
DimensionsH x W x D mm
ApplicationHousemaster consumer units aredesigned to suit installations in residentialcommercial and industrial installations,easy to install and highly reliable.Fitted with sheet steel flap for visualinspection of components.Complete with neutral and earth terminals.Unit comes complete with incomingdevices.Surface mounting only, (flush on request).
Technical DataStandard : IEC 439-1&3, BS 60439-1&3Max. load : 100 amps
80 amps for 4 way RCCBMax. voltage : 230 V ac, 50 HzRange : 4, 7, 11, 16 and 20 SP & N ways
Split load, 8, 12, 16 waysDegree of protection : IP 30Enclosure material : Cold rolled sheet steel
Box and cover 1 mm(Aluzinc steel on request)
Enclosure finish : Gray, RAL 7035
Consumer UnitsHousemaster compactOrdering details
Housemaster sheet steel range
Split load (E202/100A+F202AC/80/0.03A) IncomerWeightkg
No. ofways
Ordering detailsType Code Type No.
xxx
xxx
HSSL 4+4CHSSL 6+6CHSSL 8+8C
1SKB 113 142 C80011SKB 118 142 C80011SKB 122 142 C8001
282368440
110110110
4.15.15.5
4+46+68+8
256256256
DimensionsH x W x D mm
Single pole pin type comb busbar
Weightkg
Max.current A
No. ofmodules
Ordering detailsType Code Type No.PNCB-05
PNCB-08
PNCB-12
PNCB-17
PNCB-21
PNCB-10PNCB-14PNCB-18PNCB-60
1SKB 034 702 P0005
1SKB 034 702 P0008
1SKB 034 702 P0012
1SKB 034 702 P0017
1SKB 034 702 P0021
1SKB 034 702 P00101SKB 034 702 P00141SKB 034 702 P00181SKB 034 702 P0060
ECS 104CHSMS/RC 04CECS 107CHSMS/RC 07CECS 111CHSMS/RC 011CECS 116CHSMS/RC 016CECS 120CHSMS/RC 020CHSSL 4+4CHSSL 6+6CHSSL 8+8C**
0.022
0.035
0.052
0.074
0.091
0.0430.0650.0820.260
100 5
8
12
17
21
10141860
30
C.S.Amm
Used for
** General as spare part (Original part)
Accessories
Max.load A80100100100100
1SKC 015 003 F0001
1SKC 015 004 F0001
61SKC802015C0205
Split load (E202/100A+F202AC/80/0.03A) IncomerWeightkg
No. ofways
Ordering detailsType Code Type No.
xxx
xxx
HMSL 4+4CHMSL 6+6CHMSL 8+8C
1SPE 007 712 F03131SPE 007 712 F04131SPE 007 712 F0513
300370440
123123123
4.15.15.5
4+46+68+8
226226226
DimensionsH x W x D mm
Isolator (E202/100A) IncomerWeightkg
No. ofways
Ordering detailsType Code Type No.
xxxxx
xxxxx
HMMS 04CHMMS 06CHMMS 10CHMMS 14CHMMS 18C
1SPE 007 712 F01111SPE 007 712 F02111SPE 007 712 F03111SPE 007 712 F04111SPE 007 712 F0511
190230300370440
123123123123123
2.43.13.74.75.1
46101418
226226226226226
DimensionsH x W x D mm
RCCB (F202AC/100/0.03A) Incomer, for HSRC 04C (F202AC/80/0.03A)Weightkg
No. ofways
Ordering detailsType Code Type No.
xxxxx
xxxxx
HMRC 04CHMRC 06CHMRC 10CHMRC 14CHMRC 18C
1SPE 007 712 F01121SPE 007 712 F02121SPE 007 712 F03121SPE 007 712 F04121SPE 007 712 F0512
190230300370440
123123123123123
2.53.23.84.85.2
46101418
226226226226226
DimensionsH x W x D mm
Housemaster plastic range
Consumer UnitsHousemaster compactOrdering details (continued)ApplicationHousemaster consumer units aredesigned to suit installations in residentialcommercial and industrial installations,easy to install and highly reliable.Unit comes complete with blanking plates,busbar, busbar cover, terminal bars andinstallation instructions.Surface mounting only.
Technical DataStandard : IEC 439-1 & BS 60439-1Max. load : 100 amps
80 amps for 4 way RCCBMax. voltage : 230 V ac, 50 HzRange : 4, 6, 10, 14 and 18 SP & N ways
Split load, 8, 12, 16 waysDegree of protection : IP 30Enclosure material : Moulded plasticEnclosure finish : White, RAL 9010
Max.load A80100100100100
1SKC 015 005 F0001
1SKC 015 006 F0001
1SKC 015 007 F0001
Distribution BoardsProtecta compactOrdering details
TP + N busbar type distribution boardsWeightkg
No. of TPways
Ordering detailsType Code Type No.
46812162024
EPB25-304CEPB25-306CEPB25-308CEPB25-312CEPB25-316CEPB25-320CEPB25-324C
1SKP 804 142 C00511SKP 806 142 C00511SKP 808 142 C00511SKP 812 142 C00511SKP 816 142 C00511SKP 820 142 C00511SKP 824 142 C0051
50256061071883010011140
400400400400400400400
125125125125125125125
xxxxxxx
xxxxxxx
1213.214.216.320.224.326.4
DimensionsH x W x D mm
Multi row type a distribution boards (distance between rows 150mm)Weightkg
No. ofrows
Ordering detailsType Code Type No.
xxxxx
xxxxx
EPA 01EPA 02EPA 03EPA 04EPA 05
1SKP 116 142 C00011SKP 232 142 C00011SKP 348 142 C00011SKP 464 142 C00011SKP 580 142 C0001
400400400400400
2805026508001001
125125125125125
12345
DimensionsH x W x D mm
1632486480
No. ofmodules
710.7131821
Technical Data
Standard : IEC 439- 3 & BS 60439 part 1 & 3Single row typeRange : 6, 9, 13, 18 and 22 ModulesMulti row typeMax. load : 100 ampsMax. voltage : 230 / 400 V ac, 50 / 60 HzRange : 16, 32, 48, 64 and 80 modules
1, 2, 3, 4 and 5 rowsBusbar typeMax. load : 250 ampsMax. voltage : 230 / 400 V ac, 50 / 60 HzRange : 4, 6, 8, 12, 16, 20 and 24 TP&N ways
12, 18, 24, 36, 48, 60 and 72 SP&N waysDegree of protection : IP 41, pan assemblies IP 20Enclosure material : Cold rolled sheet steel
Box and cover 1 mm(Aluzinc steel on request)
Enclosure finish : Gray, RAL 7035Fault level : 35 kA
Application
Protecta compact distribution boards,a design aimed for safety, reliabilityand availability in the electrical buildinginstallation.Available in busbar and multi rowtypes.Surface mounting only, (flush onrequest).Supplied without incoming device oroutgoing protection device.
Single row type are deliveredcomplete with neutral and earthterminals, comb busbar and busbarneutral connection.
TP + N busbar distribution boards with DIN rail for 8 modules (MX version)*Weightkg
No. of TPways
Ordering detailsType Code Type No.
46812
EPB 304 MXCEPB 306 MXCEPB 308 MXCEPB 312 MXC
1SKP 804 142 C10011SKP 806 142 C10011SKP 808 142 C10011SKP 812 142 C1001
502560610718
400400400400
125125125125
xxxx
xxxx
11.8131416
DimensionsH x W x D mm
Single row type a distribution boards
71SKC802015C0205
* Connection kit EPB KIT7C is proposed for connection of incoming devices to the main busbars.
256256256256256
Weightkg
No. ofways
Ordering detailsType Code Type No.
xxxxx
xxxxx
ECS 104CECS 107CECS 111CECS 116CECS 120C
1SKB 106 142 C20011SKB 109 142 C20011SKB 113 142 C20011SKB 118 142 C20011SKB 122 142 C2001
155210282368440
110110110110110
2.12.83.44.44.8
47111620
DimensionsH x W x D mm
69131822
No. ofmodules
1SKC 015 008 F0001
1SKC 015 009 F0001
1SKC 015 010 F0001
1SKC 015 011 F0001
1SKC 015 012 F0001
81SKC802015C0205
Distribution BoardsProtecta compact accessories / TP + N pan assembliesOrdering details
Top extension boxes (16 Modules)Type Weight
kgOrdering details
Type Code Type No.463.5
Sheet steel flap / 1RowSheet steel flap / 2RowPlastic flap
EPB TEB 200SEPB TEB 400SEPB TEB 200P
1SKA 122 142 C00011SKA 124 142 C00011SKA 125 142 C0001
200400200
400400400
125125125
xxx
xxx
DimensionsH x W x D mm
Top / bottom extension boxesType Weight
kgOrdering details
Type Code Type No.3.56
Plain coverPlain cover
EPB TEB 200CEPB TEB 400C
1SKA 121 142 C00011SKA 123 142 C0001
200400
400400
125125
xx
xx
DimensionsH x W x D mm
No. ofmodules
5025606107188301001
12.513.515.5182023
323248646480
223445
No. ofrows
Weightkg
Ordering detailsType Code Type No.
400400400400400400
125125125125125125
xxxxxx
xxxxxx
1SKA 102 142 C00011SKA 112 142 C00011SKA 103 142 C00011SKA 104 142 C00011SKA 114 142 C00011SKA 105 142 C0001
EPB SEB2R04WEPB SEB2R06WEPB SEB3R08WEPB SEB4R12WEPB SEB4R16WEPB SEB5R20W
DimensionsH x W x D mm
Side extension boxes (distance between rows 150mm)
4 way6 way8 way12 way16 way20 way
Sided withTP+N DB’s
Weightkg
No. ofways
Ordering detailsType Code Type No.
xxxxxxx
xxxxxxx
EPB 304 PAC-16EPB 306 PAC-16EPB 308 PAC-16EPB 312 PAC-16EPB 316 PAC-16EPB 320 PAC-16EPB 324 PAC-16
1SKP 804 100 C01011SKP 806 100 C01011SKP 808 100 C01011SKP 812 100 C01011SKP 816 100 C01011SKP 820 100 C01011SKP 824 100 C0101
270270270270270270270
3754294835916998741014
60606060606060
3.13.74.35.26.78.29.4
46812162024
DimensionsH x W x D mm
TP + N pan assemblies, complete with busbars + earth / neutral bars. (range 160 A)
Weightkg0.30.30.2
Accessories for distribution boards
Flange plate blankFlange plate with knock-outsCylinder lock with keys
No. Ordering detailsType Code Type No.EPB GP1EPB GP2EPB CL A1-G
1SKA 130 002 C00011SKA 131 002 C00011SKA 132 002 C1001
123
Accessory type
TP + N pan assemblies
Weightkg
No. ofways
Ordering detailsType Code Type No.
xxxxxxx
xxxxxxx
EPB25-PA304CEPB25-PA306CEPB25-PA308CEPB25-PA312CEPB25-PA316CEPB25-PA320CEPB25-PA324C
1SKP 804 100 C00511SKP 806 100 C00511SKP 808 100 C00511SKP 812 100 C00511SKP 816 100 C00511SKP 820 100 C00511SKP 824 100 C0051
270270270270270270270
3754294835916998741014
60606060606060
3.13.74.35.26.78.29.4
46812162024
DimensionsH x W x D mm
TP + N pan assemblies, complete with busbars + earth / neutral bars. (range 250 A)
1SKC 015 013 F0001
1SKC 015 014 F0001
1SKC 015 015 F0001
1SKC 015 016 F0001
1SKC 015 017 F0001
1SKC 015 018 F0001
91SKC802015C0205
Distribution BoardsMini Center compactOrdering details
Mini Center accessories
TP + N busbar type distribution boards
Multi row type a distribution boards (distance between rows 150mm)
Top / Bottom extension boxesfor flush mounting
Weightkg
No. of TPways
Ordering detailsType Code Type No.
xxxxx
xxxxx
4681216
540600650758870
420420420420420
132132132132132
11.713.114.116.120.1
EMC 312 CF-16EMC 318 CF-16EMC 324 CF-16EMC 336 CF-16EMC 348 CF-16
1SKM 804 242 C01111SKM 806 242 C01111SKM 808 242 C01111SKM 812 242 C01111SKM 816 242 C0111
DimensionsH x W x D mm
320540690840990
2032486480
12345
132132132132132
Weightkg
No. ofrows
No. ofmodules
Ordering detailsType Code Type No.
xxxxx
xxxxx
420420420420420
610.6131720
EMC 120 RXFEMC 232 RXFEMC 348 RXFEMC 464 RXFEMC 580 RXF
1SKM 120 242 C00011SKM 232 242 C00011SKM 348 242 C00011SKM 464 242 C00011SKM 580 242 C0001
DimensionsH x W x D mm
Plain coverPlain cover
154154
Weightkg
Type Ordering detailsType Code Type No.
xx
xx
420420
220420
EMC 200 EXB FEMC 400 EXB F
1SKA 252 242 C00011SKA 253 242 C0001
DimensionsH x W x D mm
4.56.5
Top extension boxesType Weight
kgOrdering details
Type Code Type No.4.56.5
Sheet steel flap / 1RowSheet steel flap / 2Row
EMC 200S EXB FEMC 400S EXB F
1SKA 254 242 C00011SKA 255 242 C0001
220420
420420
154154
xx
xx
DimensionsH x W x D mm
Technical Data
Standard : IEC 439- 3 & BS 60439 part 1 & 3
Multi row typeMax. load : 100 ampsMax. voltage : 230 / 400 V ac, 50 / 60 HzRange : 20, 32, 48, 64 and 80 modules
1, 2, 3, 4 and 5 rowsBusbar typeMax. load : 160 amps
Available in 250 amps on requestMax. voltage : 230 / 400 V ac, 50 / 60 HzRange : 4, 6, 8, 12 and 16 TP&N ways
12, 18, 24, 36 and 48 SP&N waysDegree of protection : IP 41, pan assemblies IP 20Enclosure material : Cold rolled sheet steel
Box and cover 1 mm(Aluzinc steel on request)
Enclosure finish : Gray, RAL 7035Fault level : 35 kA
Application
Mini Center compact distributionboards, a design aimed for safety,reliability and availability in theelectrical building installation.Available in busbar and multi rowtypes.Flush mounting only, (surface onrequest).Supplied without incoming device oroutgoing protection device.
1SKC 015 019 F0001
1SKC 015 020 F0001
1SKC 015 021 F0001
101SKC802015C0205
Distribution boardsMounting kits for compactOrdering details
The TP + N busbar type distribution boards are delivered as standard without incomingkits or incoming devices these need to be ordered separately.
RCCB Incoming kitKit contains:
� Terminal shroud.� Cover plate.� DIN Rail mounting bracket for incoming device.� Neutral wire link (flexible blue 16 mm2)� Kit parts list.� Instruction leaflet.
Kit No. Ordering detailsType Code Type No.EPB KIT 2C 1SKA 142 000 C10012
Incoming Device
4 pole RCCB F 200 series
Weightkg0.12
Kit contains:� Covers for unused connection busbar points (1 Strip For 4, 6 ways - 2 Strip For 8, 12 ways - 3 Strip
For 16, 20 ways - 4 Strip For 24 ways)� Labels for outgoing circuits on door and trim cover (L1,L2,L3) to suit the board configuration.� Two keys for door lock. � Kit parts list.� Instruction leaflet.
Standard kits (Included with the distribution boards but can also be ordered separately as spares)
Kit No. Ordering detailsType Code Type No.EPB KIT 0-1CEPB KIT 0-2CEPB KIT 0-3CEPB KIT 0-4CEPB KIT 0-5CEPB KIT 0-6CEPB KIT 0-7C
1SKA 140 000 C10021SKA 140 000 C10031SKA 140 000 C10041SKA 140 000 C10051SKA 140 000 C10061SKA 140 000 C10071SKA 140 000 C1008
0
Incoming Device
3 pole isolator or MCB
Weightkg
No. ofways46812162024
0.040.040.040.040.040.040.05
Kit contains:� Coloured flexible cables and comb busbar to connect incoming devices to main Busbars.� Terminals shroud.� Kit parts list.� Instruction leaflet.
Connection kit For TP+N distribution board with DIN Rail (MX version)
Kit No. Ordering detailsType Code Type No.EPB KIT 7C 1SKA 147 000 C10017
Weightkg0.47
For connection of 4 pole isolator to 4 pole RCCB and RCCB to the main busbar terminals and neutral bar
Isolator Incoming kitKit contains:
� Terminal shroud.� Cover plate with 3 module opening.� DIN Rail mounting bracket for incoming device.� Kit parts list.� Instruction leaflet.
Kit No. Ordering detailsType Code Type No.EPB KIT 8C 1SKA 148 000 C10018
Incoming Device
3 pole isolator or MCB
Weightkg0.12
1SKC 015 022 F0001
1SKC 015 023 F0001
1SKC 015 024 F0001
1SKC 015 025 F0001
111SKC802015C0205
Distribution boardsMounting kits for compactOrdering details (continued)
Kit contains:� Copper connector piece complete with fixing screws and washers.� Terminal shroud.� Cover plate.� DIN Rail mounting bracket for incoming device.� Neutral wire link (flexible blue 16 mm2).� Kit parts list.� Instruction leaflet.
Single phase conversion kit
Kit No. Ordering detailsType Code Type No.EPB KIT 6C1 1SKA 146 000 C30016
Weightkg0.16
Direct cable connection kit (120 mm)Kit contains:
� Copper connector pieces for L1, L2, L3 complete with fixing screws, washers and support.� Two terminal shrouds.� Cover plate.� Kit parts list.� Instruction leaflet.
Kit No. Ordering detailsType Code Type No.EPB KIT 3C1 1SKA 143 000 C30013
Incoming Device
120 mm direct
Weightkg0.45
Used to mount two Protecta distribution boards, side by side or Protecta distribution board with side extensionbox. One kit is used for all distribution board configurations.Kit contains:
� 3 rubber gaskets.� 6 joining bolts 5x20 mm complete with fixing washers� Kit parts list.� Instruction leaflet.
Kit No. Ordering detailsType Code Type No.EPB KIT 5 1SKA 145 000 C00015
Weightkg0.06
Joining kit
MCCB Incoming kitKit contains: � Copper connector pieces for L1, L2, L3 complete with fixing screws and washers
� Terminal shroud.� Cover plate with opening for T1 or T3.� Kit parts list.� Instruction leaflet.
Weightkg
Kit No. Ordering detailsType Code Type No.EPB KIT 1-T1C1EPB KIT 1-T3C1
1SKA 141 000 C30011SKA 141 000 C3003
1
Incoming Device
T max T1T max T3
0.30.4
Direct cable connection kit (70 mm)Kit contains:
� Copper connector pieces for L1, L2, L3 complete with fixing screws, washers and support.� 2x Terminal shroud.� Cover plate.� Kit parts list.� Instruction leaflet.
Kit No. Ordering detailsType Code Type No.EPB KIT 4C1 1SKA 144 000 C30014
Incoming Device
70 mm direct
Weightkg0.2
1SKC 015 026 F0001
1SKC 015 027 F0001
1SKC 015 028 F0001
1SKC 015 029 F0001
1SKC 015 030 F0001
121SKC802015C0205
Distribution boardsSpare parts and general accessoriesOrdering details
Kit contains:� 1 Terminal bar.� 1 Copper cable connector complete with screw and washers.� 2 Yellow numbering labels for PE terminal bars.� 1 Work instruction.
Earth terminal bar kit complete
Description Ordering detailsType Code Type No.PETB - 04 WPETB - 06 WPETB - 08 WPETB - 12 WPETB - 16 WPETB - 20 WPETB - 24 W
1SKP 011 914 R00011SKP 011 914 R00021SKP 011 914 R00031SKP 011 914 R00041SKP 011 914 R00051SKP 011 914 R00061SKP 011 914 R0007
PE-bar 9 holes complete with screws 4 wayPE-bar 13 holes complete with screws 6 wayPE-bar 17 holes complete with screws 8 wayPE-bar 21 holes complete with screws 12 wayPE-bar 13&17 holes complete with screws 16 wayPE-bar 17&21 holes complete with screws 20 wayPE-bar 21&21 holes complete with screws 24 way
Weightkg0.080.10.120.140.190.230.25
Kit contains:� 1 Terminal bar.� 2 Terminal bar carrier (support).� 1 Kit shield cover. � 1 Warning label-small size.� 1 Copper cable connector complete with screw and washers.� 2 White numbering labels for N terminal bars.� 1 Work instruction.
Neutral terminal bar kit complete
Description Ordering detailsType Code Type No.NTB - 04 WNTB - 06 WNTB - 08 WNTB - 12 WNTB - 16 WNTB - 20 WNTB - 24 W
1SKP 011 911 R00011SKP 011 911 R00021SKP 011 911 R00031SKP 011 911 R00041SKP 011 911 R00051SKP 011 911 R00061SKP 011 911 R0007
N-bar 9 holes complete with screws & shield cover 4 wayN-bar 13 holes complete with screws & shield cover 6 wayN-bar 17 holes complete with screws & shield cover 8 wayN-bar 21 holes complete with screws & shield cover 12 wayN-bar 13&17 holes complete with screws & shield cover 16 wayN-bar 17&21 holes complete with screws & shield cover 20 wayN-bar 21&21 holes complete with screws & shield cover 24 way
Weightkg0.120.140.160.180.280.320.34
Spare parts and general accessoriesOrdering details
Type Code Type No.SZ-BP12
SZ-BSK1
NPE-CT
MTSH-C
PEFC-C
GJF1 101 902 R0008
2CDL 200 001 R0011
1SKB 014 701 P0001
1SKA 136 000 C0001
1SKA 137 000 C0001
Weightkg
Description
Blanking plates used to cover unused MCB waysin the consumer units and distribution boards frontcover supplied in a strip of 12 modules.
Busbar terminal cover used to cover unusedoutgoing busbar terminals supplied in a strip of 5pieces.
Copper connection terminal for connecting incomingcable to neutral or earth terminal bars.
Terminal shroud
Front facia cover
0.05
0.003
0.03
0.10
1SKC 015 031 F0001
1SKC 015 032 F0001
1SKC 015 033 F0001
1SKC 015 034 F0001
1SKC 015 035 F0001
1SKC 015 036 F0001
1SKC 015 037 F0001
131SKC802015C0205
Consumer UnitsDimensional details
Comby plastic flap consumer unit flush mounted
250
276
142
C
276
A (mm)No. ofModules
Type Code B (mm)
7101620
203257262434
ECT 107 FECT 110 FECT 116 FECT 120 F
229283386460
C (mm)
133187292366
Comby plastic flap consumer unit surface mounted
250
256
C
142256
26 A (mm)No. ofModules
Type Code B (mm)
ECT 107 SECT 110 SECT 116 SECT 120 S
7101620
209263366440
203257262434
C (mm)
133187292366
Comby steel flap consumer unit surface mounted
250
256
256 142
110
C
A (mm)No. ofModules
Type Code B (mm)
203257262434
ECS 107 DSECS 110 DSECS 116 DSECS 120 DS
7101620
209263366440
C (mm)
133187292366
141SKC802015C0205
Consumer UnitsDimensional details (continued)
Housemaster compact sheet steal consumer unit surface mounted
256
256
110
88
110
C
142
A (mm)No. ofModules
Type Code B (mm)
6
9
13
18
22
155
210
263
368
440
HSMS 04CHSRC 04CHSMS 07CHSRC 07CHSMS 11CHSRC 11CHSSL 4+4CHSMS 16CHSRC 16CHSSL 6+6CHSMS 20CHSRC 20CHSSL 8+8C
152
207
257
365
437
C (mm)
77
133
187
292
360
Comby steel flap consumer unit flush mounted
A (mm)No. ofModules
Type Code B (mm)
203257262434
ECS 107 DFECS 110 DFECS 116 DFECS 120 DF
7101620
229283386460
C (mm)
133187292366
256 142
110
C
250
276
Housemaster compact plastic consumer unit surface mounted
A (mm)No. ofModules
Type Code B (mm)
6
9
13
18
22
100
140
210
280
350
HMMS 04CHMRC 04CHMMS 07CHMRC 07CHMMS 11CHMRC 11CHMSL 4+4CHMMS 16CHMRC 16CHMSL 6+6CHMMS 20CHMRC 20CHMSL 8+8C
190
230
300
370
440
A
B
123
122226
Protecta multi row distribution boards
125
400
294
1632486480
2805026508001000
A (mm)No. ofWays
Type Code B (mm)
EPA 01EPA 02EPA 03EPA 04EPA 05
94332438546829
Distribution BoardsDimensional details (continued)
151SKC802015C0205
Protecta compact single row distribution boards surface mounted
256
256
110
88
110
C
142
A (mm)No. of O/GModules
Type Code B (mm)
152207257365437
ECS 104CECS 107CECS 111CECS 116CECS 120C
47111620
155210263368440
C (mm)
77133187292360
Protecta compact busbar type distribution boards
125
400
294
332
386
438
546
654829969
4
6
8
12
162024
502
560
610
718
83010001140
A (mm)No. ofWays
Type Code B (mm)
EPB25-304CEPB 304 MXCEPB25-306CEPB 306 MXCEPB25-308CEPB 308 MXCEPB25-312CEPB 312 MXCEPB25-316CEPB25-320CEPB25-324C
Distribution BoardsDimensional details (continued)
Depth 60 mm.
161SKC802015C0205
A (mm)No. ofways
Type Code B (mm) C (mm)
4681216
540600650758870
EMC 312 CF-16EMC 318 CF-16EMC 324 CF-16EMC 336 CF-16EMC 348 CF-16
316372426534642
498558608716828
A (mm)No. ofModules
Type Code B (mm)
320540690840990
2032486480
EMC 120 RXFEMC 232 RXFEMC 348 RXFEMC 464 RXFEMC 580 RXF
278496646750918
C (mm)
94312462566736
Protecta compact pan assemblies
235
B
252
270
Minicenter busbar type distribution boards
Minicenter multi row distribution boards
A (mm)Type Code
EPB 304 PAC-16EPB25-PA304CEPB 306 PAC-16EPB25-PA306CEPB 308 PAC-16EPB25-PA308CEPB 312 PAC-16EPB25-PA312CEPB 316 PAC-16EPB25-PA316CEPB 320 PAC-16EPB25-PA320CEPB 324 PAC-16EPB25-PA324C
No. ofWays4
6
8
12
16
20
24
375
429
483
591
699
875
1014
B (mm)
202
256
310
418
526
701
841
132
C
400
420
132
A
420
B
294
25 20
43
420
132
400294
Contact us
ABB7 Dr. Mohamed Kamel Hussein St.,El Nozha El Gedeida, Heliopolis. Cairo, Egypt.Tel.: + 202 2622 4660Sales Tel.: + 202 2625 1448 - 2625 1446Fax: + 202 2622 2642paul.north@eg.abb.com
www.abb.com/mea/lowvoltage
As part of its on-going product improvement, ABB reservesthe right to modify the characteristics or the productsdescribed in this document. The information given is not-contractual. For further details please contact the ABBcompany marketing these products in your country.
No:
1SK
C80
2015
C02
05 -
Prin
ted
in E
gypt
(Mar
. 200
9) -
ein
adv
ertis
ing
desi
gns
IS2 enclosures by ABB are the perfect platform for protection, mounting and installation of your industrial control panel component needs. The features and benefits of the IS2 allow for easy installation and design:
− Modular panel and component design − Readily available 3D drawings for ease
of design − Flexible options to suit a variety
of applications
Technical characteristics − Industry standard dimensions − NEMA 12 enclosure − Floor mounted − UL 50 certified − Suitable for UL 508A applications − Color: Grey RAL7035 − Standard components provided with
grounding connections
Standard dimensionsHeight: 1800, 2000 (mm)Width: 600, 800, 1000, 1200 (mm)Depth: 500, 600, 800 (mm)
Note: Standard dimensions are available from stock. Additional dimensional sizes available from factory upon request.
User installed accessories − Standard and oversized mounting back
plates with front or lateral insertion − Cable entry flanges − Mounting crosspieces − 19-inch rack frames − Lifting eyebolts and reinforcements − Key lock inserts − Fans, filters, and grates for ventilation
IS2 Automation Enclosures Catalog selection guide
Electrification Products
Note:1 1200 (mm) wide is not available in 1000 (mm) depth.2 Only available for front/rear blind panel.
All factory assembled enclosures include: uprights/frame, base/top, plinths and plinth covers and lifing eyes.
Factory assembled catalog number breakdown
I S X X X X X X
Height Width Depth Front Door Front Door Width Rear Door Rear Door Width Right Side Left Side Cable Entry
X —NoneF —FixedS —Sliding
X —NoneF —Blind side panel A —Blind door (right hinge)L —Blind door (left hinge)
2 —200 (mm)4 —400 (mm) 5 —500 (mm)6 —600 (mm)8 —800 (mm)1 —1000 (mm)A —1200 (mm)2
1 —1800 (mm)2 —2000 (mm) A —2200 (mm)
4 —400 (mm)6 —600 (mm)8 —800 (mm)1 —1000 (mm)A —1200 (mm)1
4 —400 (mm)5 —500 (mm)6 —600 (mm)8 —800 (mm)1 —1000 (mm)
X —NoneF —Blind panelA —Blind door (right hinge)B —Transparent (right hinge)C —Aerated (right hinge)D —Double w/ overlapping closure (right hinge)Q—Double door w/ handlesL —Blind door (left hinge)M—Transparent (left hinge)N —Aerated (left hinge)P —Double w/ overlapping closure (left hinge)
Accessories must be ordered separately and are available from the U.S. distribution center. This allows for quick delivery and easier component installation.
Factory assembled optionsUser installed accessories
Standard Mounting Back Plates
H (mm) W (mm) Ordering Code
1800
600 EA1860
800 EA1880
1000 EA1810
1200 EA1812
2000
600 EA2060
800 EA2080
1000 EA2010
1200 EA2013
Fixed 19" Rack Frame and Brackets
Mounting Frames
H (mm) W (mm) Ordering Code
1800 800 EG1805
2000 800 EG2005
Required Mounting Brackets D (mm) Ordering Code
Top Bracket - 2 pcs 600 EB6104
Top Bracket - 2 pcs 800 EB8104
Center/Bottom Bracket - 2 pcs 600 EB6106
Center/Bottom Bracket - 2 pcs 800 EB8106
Ventilation Kits
H (mm) W (mm) Ordering Code
Grill, Fan and Filter 115V Power Supply Required
250 250 EN2204K
Grill, Fan and Filter 230V Power Supply Required
204 204 EN1204K
Blind Door
Blind Panel
Sliding CableEntry Plates
Double DoorOverlapping Closure
Doors/Panels and Bottom Cable Entry
800 (mm)
For a complete list of options and accessories, please contact your local sales representative.
User Installed Accessory Code:
H (mm) W (mm) Ordering Code
2000 800 EA2080
6
Ordering Example:
Factory Assembled Code:
I S 2 8 8 P 4 F 8 F F S X X X X X X
1 2 3 4 5
1 2 3 4 5
2000(mm)
800 (mm)
800 (mm)
400 (mm)
6
Ordering Code(s):
=IS288P4F8FFSXXXXXX+
EA2080*
*Back plate shipped loose
1SX
U15
0187
L020
1, A
pril
2016
Contact us ABBElectrification Products8155 T&B BoulevardMemphis, TN 38125www.abb.com/lowvoltage
USA Technical Support: 888-385-1221Customer Service: 888-862-32907:00 a.m. to 5:30 p.m., CST, Monday – Fridaylvps.support@us.abb.com
—ABB Electrical Industries (ABB Arab) S.A.E. P.O. Box 11771 CairoEgypt
abb.com/ System pro E control SR Basic
© Copyright 2017 ABB. All rights reserved. Specifications subject to change without notice. 1SKC802016C2016
— System pro E control SR BasicLow voltage small and medium-sized enclosures for automation and distribution
— SR Basic is the latest range of multipurpose enclosures suitable for industrial and commercial applications, with high degree of protection in accordance with standard.
SyStEm pRo E contRol SR BASIc | LOw vOLtAge SmALL And medium-Sized enCLOSureS
— table of contents
SyStEm pRo E contRol SR BASIc | tABLe Of COntentS
Introduction
General characteristics
technical details
System description
ordering details
Dimensions details
05-05
06-06
06-06
07-07
08-10
11-13
5 SyStEm pRo E contRol SR BASIc | LOw vOLtAge SmALL And medium-Sized enCLOSureS
—Introduction
the Sr Basic enclosures can be also installed in secondary distribution switchboards
thanks to the possibility of installing the whole range of apparatus and modular
circuit-breakers on din rails, thereby allowing construction of electrical switchgears,
in widths from 200 to 800 mm, heights from 300 to 1600 mm, and depths from 150
to 400 mm.
A single line of metalwork structures therefore allows construction of automation
and, secondary and end distribution electrical switchboards thanks to the mounting
plate and the optional stacking of enclosures.
Sr Basic extensive range of enclosures is perfect for meeting all the current
requirements of electrical installations, in residential, tertiary and industrial sectors.
with their high specification the System pro e Sr Basic enclosures are the perfect fit
for the demanding requirements of railways and infrastructure.
in electrical installations such as banks, hospitals and airports where service
continuity is critical, an enclosure system allows the switchgear to connect and
disconnect voltages in a totally safe manner, which is required.
6SyStEm pRo E contRol SR BASIc | generAL ChArACteriStiCS
—General characteristics
construction characteristics
the construction characteristics of the series guarantee practical
installation and versatility, as well as highly technical features, such as
the iP65 degree of protection. the apparatus can be installed on a
blind back plate.
Range
the range is divided into 43 different dimensions: from h=300mm to
1800mm, w=200mm to 1200mm and d=150mm to 400mm.
the enclosures can be installed either on the wall, or on the floor.
locking systemDifferent closing systems can be installed as per site requirement
Hinge systemHinges are made of aluminummaterial in order to resistcorrosion
provision for door earthingDoor earthing is assured by twoearth studs fixed on the top andbottom corners of the door
technical detailsconformity with standard IEC 62208
Degree of protection iP 65 (ieC 60529)
Degree of mechanical strength iK 10 (ieC 62262)
Fixing method floor standing / wall mounting
color rAL 7035
type of material 15/10 Sheet Steel for enclosure
20/10 galvanized mounting plate
7 SyStem pro e control Sr BaSic | Low voLtage smaLL and medium-sized encLosures
—System description
Wide mounting plate Door can be hinged on the right or left side
Removable gland plates asstandard supplied on the topand the bottom .
Internal polyurethane foam gasket, laid using a continuous casting process
8SyStEm pRo E contRol SR BASIc | Ordering detAiLS
—ordering details
Empty enclosure with single plain door with mounting plate
300 200 150 SrB0302015 1SKe302015C0001300 300 150 SrB0303015 1SKe303015C0001400 300 150 SrB0403015 1SKe403015C0001400 300 200 SrB0403020 1SKe403020C0001500 400 150 SrB0504015 1SKe504015C0001500 400 200 SrB0504020 1SKe504020C0001600 400 150 SrB0604015 1SKe604015C0001600 400 200 SrB0604020 1SKe604020C0001600 400 250 SrB0604025 1SKe604025C0001600 600 250 SrB0606025 1SKe606025C0001700 500 200 SrB0705020 1SKe705020C0001700 500 250 SrB0705025 1SKe705025C0001800 600 200 SrB0806020 1SKe806020C0001800 600 250 SrB0806025 1SKe806025C0001800 600 300 SrB0806030 1SKe806030C0001800 800 300 SrB0808030 1SKe808030C00011000 600 200 SrB1006020 1SKe106020C00011000 600 250 SrB1006025 1SKe106025C00011000 600 300 SrB1006030 1SKe106030C00011000 800 200 SrB1008020 1SKe108020C00011000 800 250 SrB1008025 1SKe108025C00011000 800 300 SrB1008030 1SKe108030C0001
Dimensions
HHeight Width Depth
W D
ordering details
type code ordering code
9 SyStem pro e control Sr BaSic | Low voLtage smaLL and medium-sized encLosures
Empty enclosure with single plain door with mounting plate
1200 600 250 SrB1206025 1SKe126025C00011200 600 300 SrB1206030 1SKe126030C00011200 800 250 SrB1208025 1SKe128025C00011200 800 300 SrB1208030 1SKe128030C00011400 800 300 SrB1408030 1SKe148030C00011400 800 400 SrB1408040 1SKe148040C00011600 800 300 SrB1608030 1SKe168030C00011600 800 400 SrB1608040 1SKe168040C00011800 800 300 SrB1808030 1SKe188030C00011800 800 400 SrB1808040 1SKe188040C0001
Dimensions
HHeight Width Depth
W D
ordering details
type code ordering code
—ordering details
10
—ordering details
Empty enclosure with double plain door with mounting plate
1000 1000 300 SrB10010030 1SKe101030C00011200 1000 300 SrB12010030 1SKe121030C00011200 1000 400 SrB12010040 1SKe121040C00011400 1000 300 SrB14010030 1SKe141030C00011400 1000 400 SrB14010040 1SKe141040C00011600 1000 300 SrB16010030 1SKe161030C00011600 1000 400 SrB16010040 1SKe161040C00011800 1000 300 SrB18010030 1SKe181030C00011800 1000 400 SrB18010040 1SKe181040C00011800 1200 300 SrB18012030 1SKe181230C00011800 1200 400 SrB18012040 1SKe181240C0001
Dimensions
HHeight Width Depth
W D
ordering details
type code ordering code
SyStEm pRo E contRol SR BASIc | Ordering detAiLS
11 SyStem pro e control Sr BaSic | Low voLtage smaLL and medium-sized encLosures
—Dimensions Details
type code
SrB0302015300 200 150 130 230 120 43 148 225
SrB0303015 300 150 230 230 220 43 245 225SrB0403015
400 300 150 230 330 220 43 248 325SrB0403020 200 230 330 220 93 248 325SrB0504015
500 400 150 330 430 320 43 348 425SrB0504020 200 330 430 320 93 348 425SrB0604015
600 400150 -70 530 -80 43 -52 525
SrB0604020 200 -70 530 -80 93 -52 525SrB0604025 250 -70 530 -80 143 -52 525SrB0606025 600 250 530 530 520 143 545 525SrB0705020
700 500 200 430 630 420 93 448 625SrB0705025 250 430 630 420 143 448 625SrB0806020
800600
200 530 730 520 93 548 725SrB0806025 250 530 730 520 143 548 725SrB0806030 300 530 730 520 193 548 725SrB0808030 800 300 730 730 720 193 745 725SrB1006020
1000
600200 530 930 520 93 548 925
SrB1006025 250 530 930 520 143 548 925SrB1006030 300 530 930 520 193 548 925SrB1008020
800200 530 930 720 93 745 925
SrB1008025 250 530 930 720 143 745 925SrB1008030 300 530 930 720 193 745 925
Dimensions
HHeight Width Depth
M2(mm)M1(mm) G1(mm) G2(mm) P1(mm) P2(mm)W D
12
—Dimensions Details
SrB1206025
1200
600 250 432 96 524 1144SrB1206030 300 432 193 524 1144SrB1208025
800 250 720 143 745 1144SrB1208030 300 720 193 745 1144SrB1408030
1400 800 300 720 193 745 1345SrB1408040 400 720 293 745 1345SrB1608030
1600 800 300 720 193 745 1545SrB1608040 400 720 293 745 1545SrB1808030
1800 800 300 720 193 745 1745SrB1808040 400 720 293 745 1745
type code
Dimensions
H (mm)Height Width Depth
W (mm) D (mm) G1 (mm) G2 (mm) P1 (mm) P2 (mm)
SyStEm pRo E contRol SR BASIc | dimenSiOnS detAiLS
13 SyStem pro e control Sr BaSic | Low voLtage smaLL and medium-sized encLosures
—Dimensions Details
SrB10010030 1000 1000 300 920 193 945 945SrB12010030
1200 1000300 920 193 945 1145
SrB12010040 400 920 293 -55 1145SrB14010030
1400 1000300 920 193 945 1345
SrB14010040 400 920 293 -55 1345SrB16010030
1600 1000300 920 193 945 1545
SrB16010040 400 920 293 -55 1545SrB18010030
18001000
300 920 193 945 1745SrB18010040 400 920 293 -55 1745SrB18012030
1200300 1120 193 1145 1745
SrB18012040 400 1120 293 -55 1745
type code
Dimensions
H (mm)Height Width Depth
W (mm) D (mm) G1 (mm) G2 (mm) P1 (mm) P2 (mm)
14SyStEm pRo E contRol SR BASIc | fOr yOur nOteS
15 SyStem pro e control Sr BaSic | Low voLtage smaLL and medium-sized encLosures
16SyStem pro e control Sr BaSic | Low voLtage smaLL and medium-sized encLosures
Additional informationwe reserve the right to make technical changes or modify the contents of this document without prior notice. with regard to purchase orders, the agreed particulars shall prevail. ABB Ag does not accept any responsibility whatso-ever for potential errors or possible lack of information in this document.
we reserve all rights in this document and in the subject matter and illustra-tions contained therein. Any reproduc-tion, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB Ag.
Distribution EnclosuresUNIKIT
General
Technical details
Ordering detailsUnikit 150 / 250AccessoriesSpare Parts
Order exampleComplete enclosed solutions
Contents
1SKC802020C0202
2
3
3/45/7
8
910/12
1
Distribution EnclosuresUNIKIT
2
Distribution EnclosuresUNIKITGeneral
1SKC802020C0202
Easy to transport & fast to assemble
UNIKIT, the innovative enclosure system offers maximum safety,functionality, flexibility, quick and simple assembly.
UNIKIT is an extendable system where standardised components can beassembled quickly and cost-effectively into a complete individual panel.
A unique quick-fasten element lies at the heart of the quick assemblysystem. It connects the individual enclosure sections to one another firmlyand securely by a simple turning action. No more drilling, no more screwingand bolting! Assembly time is reduced. This quick-fastener elementguarentees the grounding of the enclosure after assembly. Its specialconstruction makes it completely resistant to vibration.
Flat pack versions offer additional benefits:
• A clear and logically structured packaging system• Low freight costs due to reduced transportation volume• Quick and simple assembly• Easily understandable assembly instructions• Minimal packaging material• Outstanding material and workmanship quality
UNIKIT convenienceFor your convenience UNIKIT is offered in two variations: completelyassembled cabinets or as a flat pack kit for customer assembly.
• Pleasing appearance with attractive details• No visible mounting or connection elements• Enclosure covers and bottoms are pre-punched• A multitude of usable modules: e.g. EIB modules
Whether used for in-house installations or industrial applications, the extremely welldesigned UNIKIT system offers a host of decisive advantage:
31SKC802020C0202
Distribution Enclosures - UNIKITSub-sub distribution - Complete built up empty enclosuresTechnical details- Ordering details
Technical Details:
Standard (Regulations) : IEC 439-1/EN 60439-1/BS EN 60439-1&3Max. load
Wall mounted (UNIKIT 150) : 250 AFree standing (UNIKIT 250) : 630 A
Max. voltage : 400V ac, 50/60 HzRated insulation voltage Ui : 1000 V ACRated operational voltage Ue : 690 V AC
Degree of protection : IP 30 without Door IP 41 with Door IP 54 on request
Colour : RAL 7035 (1013 available on request) Rated short time withstand current: 35 KA
Enclosure material : Cold rolled sheet steel 1.5 mm (Aluzinc steel on request)
UNIKIT 150 In = 250 A
Plain doorType Weight
kgOrdering details
Type Code Type No.3239
Wall mounted size 1Wall mounted size 2
GDUN150-01GDUN150-02
1SKU 124 152 C00011SKU 224 152 C0001
7001000
700700
150150
xx
xx
DimensionsH x W x D mm
Transparent doorType Weight
kgOrdering details
Type Code Type No.3239
Wall mounted size 1Wall mounted size 2
GDUN150-01TGDUN150-02T
1SKU 124 152 C00111SKU 224 152 C0011
7001000
700700
150150
xx
xx
DimensionsH x W x D mm
UNIKIT 250 In = 630 APlain doorType Weight
kgOrdering details
Type Code Type No.42547196
Free standing size 3Free standing size 4Free standing size 5Free standing size 6
GDUN250-03GDUN250-04GDUN250-05GDUN250-06
1SKU 302 152 C00011SKU 404 152 C00011SKU 508 152 C00011SKU 612 152 C0001
700100013001900
700700700700
300300300300
xxxx
xxxx
DimensionsH x W x D mm
Transparent doorType Weight
kgOrdering details
Type Code Type No.42547196
Free standing size 3Free standing size 4Free standing size 5Free standing size 6
GDUN250-03TGDUN250-04TGDUN250-05TGDUN250-06T
1SKU 302 152 C00111SKU 404 152 C00111SKU 508 152 C00111SKU 612 152 C0011
700100013001900
700700700700
300300300300
xxxx
xxxx
DimensionsH x W x D mm
1SKC 020 001 F0001
1SKC 020 002 F0001
41SKC802020C0202
Distribution Enclosures - UNIKITSub-sub distribution - Kits for empty enclosuresOrdering details
UNIKIT 150 In = 250 A
Plain doorType Weight
kgOrdering details
Type Code Type No.3239
Wall mounted size 1Wall mounted size 2
GDUN150-01KPGDUN150-02KP
1SKU 124 152 C00091SKU 224 152 C0009
7001000
700700
150150
xx
xx
DimensionsH x W x D mm
Transparent doorType Weight
kgOrdering details
Type Code Type No.3239
Wall mounted size 1Wall mounted size 2
GDUN150-01KTGDUN150-02KT
1SKU 124 152 C00191SKU 224 152 C0019
7001000
700700
150150
xx
xx
DimensionsH x W x D mm
UNIKIT 250 In = 630 APlain doorType Weight
kgOrdering details
Type Code Type No.42547196
Free standing size 3Free standing size 4Free standing size 5Free standing size 6
GDUN250-03KPGDUN250-04KPGDUN250-05KPGDUN250-06KP
1SKU 302 152 C00091SKU 404 152 C00091SKU 508 152 C00091SKU 612 152 C0009
700100013001900
700700700700
300300300300
xxxx
xxxx
DimensionsH x W x D mm
Transparent doorType Weight
kgOrdering details
Type Code Type No.42547196
Free standing size 3Free standing size 4Free standing size 5Free standing size 6
GDUN250-03KTGDUN250-04KTGDUN250-05KTGDUN250-06KT
1SKU 302 152 C00191SKU 404 152 C00191SKU 508 152 C00191SKU 612 152 C0019
700100013001900
700700700700
300300300300
xxxx
xxxx
DimensionsH x W x D mm
1SKC 020 004 F0001
1SKC 020 003 F0001
1SKC 020 005 F0001
Distribution Enclosures - UNIKIT 150/250AccessoriesOrdering detailsPlain internal coversHightmm
Weightkg
Ordering detailsType Code Type No.
0.350.701.051.402.102.803.50
50100150200300400500
GDUN-AC050GDUN-AC100GDUN-AC150GDUN-AC200GDUN-AC300GDUN250-AC400GDUN250-AC500
1SKA 514 000 R00011SKA 514 000 R00021SKA 514 000 R00031SKA 514 000 R00041SKA 514 000 R00051SKA 514 000 R00061SKA 514 000 R0007
EUN-150/250EUN-150/250EUN-150/250EUN-150/250EUN-150/250EUN-250EUN-250
Suitable for
Slotted internal covers for incoming devicesHightmm
Weightkg
Ordering detailsType Code Type No.
2.102.802.802.802.802.80
300300400400400400
GDUN-AS1T1M3GDUN250-AS1T3M3GDUN250-AS1T4M4GDUN250-AS1T5M4GDUN250-AS1T5S4GDUN250-AS1T6S4
1SKA 515 000 R00011SKA 515 000 R00021SKA 515 000 R00031SKA 515 000 R00041SKA 515 000 R00051SKA 515 000 R0006
EUN-150/250EUN-250EUN-250EUN-250EUN-250EUN-250
Suitable for
T1 middleT3 middleT4 middleT5 middleT5 sideT6 side
Incoming MCCBType location
Internal back plates for outgoing horizontal fixingWeightkg
Ordering detailsType Code Type No.GDUN-ABP4T1MGDUN250-ABP6T1MGDUN250-ABP2T3SGDUN250-ABP3T3S
1SKA 520 000 R00611SKA 520 000 R00711SKA 520 000 R00811SKA 520 000 R0091
EUN-150/250EUN-250EUN-250EUN-250
Suitable for
T1 4 middleT1 6 middleT3 2 sideT3 3 side
Outgoing MCCB’sType Qty. location
Internal back plates for incoming vertical fixingWeightkg
Ordering detailsType Code Type No.GDUN-ABP1T1MGDUN250-ABP1T3MGDUN250-ABP1T4MGDUN250-ABP1T5MGDUN250-ABP1T5SGDUN250-ABP1T6S
1SKA 520 000 R00011SKA 520 000 R00111SKA 520 000 R00211SKA 520 000 R00311SKA 520 000 R00411SKA 520 000 R0051
EUN-150/250EUN-250EUN-250EUN-250EUN-250EUN-250
Suitable for
T1 1 middleT3 1 middleT4 1 middleT5 1 middleT5 1 sideT6 1 side
Incoming BusbarType Qty. location
Slotted internal covers for outgoing devicesHightmm
Weightkg
Ordering detailsType Code Type No.
2.102.802.102.801.400.702.102.80
300400300400200100300400
GDUN-AS4T1M3GDUN250-AS6T1M4GDUN250-AS2T3S3GDUN250-AS3T3S4GDUN-ASMCB2GDUN-ASLP1GDUN250-ASME3GDUN250-ASMK4
1SKA 515 000 R00111SKA 515 000 R00121SKA 515 000 R00131SKA 515 000 R00141SKA 515 000 R00211SKA 515 000 R00311SKA 515 000 R00321SKA 515 000 R0033
EUN-150/250EUN-250EUN-250EUN-250EUN-150/250EUN-150/250EUN-250EUN-250
Suitable for
T1 4 middleT1 6 middleT3 2 sideT3 3 side1P MCB 28 -3 indication lamps with fuses*for measuring and indications*for measuring/kWh and indications*
Outgoing BusbarType Qty. location
* Opening cover with slotted location to fit indication or measuring,it doesn’t include the lamps or measuring devices.
51SKC802020C0202
1SKC 020 006 F0001
1SKC 020 007 F0001
1SKC 020 010 F0001
1SKC 020 011 F0001
1SKC 020 009 F0001
1SKC 020 008 F0001
61SKC802020C0202
Distribution Enclosures - UNIKIT 150/250AccessoriesOrdering details (continued)
Main busbar kits for middle busbar locationWeightkg
Ordering detailsType Code Type No.GDUN-A204T1MGDUN-A206T1MGDUN-A208T1MGDUN-A210T1MGDUN-A212T1MGDUN-A404T1MGDUN-A406T1MGDUN-A408T1MGDUN-A410T1MGDUN-A412T1M
1SKA 510 000 R00031SKA 510 000 R10031SKA 510 000 R20031SKA 510 000 R30031SKA 510 000 R40031SKA 510 000 R00021SKA 510 000 R10021SKA 510 000 R20021SKA 510 000 R30021SKA 510 000 R4002
size 4size 4size 5size 5size 6size 5size 5size 5size 6size 6
Suitable forCabinet
T1 4T1 6T1 8T1 10T1 12T1 4T1 6T1 8T1 10T1 12
OutgoingType Qty.
250250250250250400400400400400
BusbarRating A
Plinths & cable extension kits (for Unikit EUN-250)Description Weight
kgOrdering details
Type Code Type No.Plinth complete withplain flange plateSide extension cablechambers kit with door(can be assembled leftor right hand side)
GDUN250-ABA730GDUN250-ABA430GDUN250-AKS07GDUN250-AKS10GDUN250-AKS13GDUN250-AKS19
1SKA 525 000 R00011SKA 525 000 R00101SKA 530 000 R00071SKA 530 000 R00101SKA 530 000 R00131SKA 530 000 R0019
200200700100013001900
700400400400400400
300300300300300300
xxxxxx
xxxxxx
DimensionsH x W x D mm
Mounting plateDescription Weight
kgOrdering details
Type Code Type No.Blankmounting plate
Perforatedmounting plate
GDUN-ABLKP2GDUN-ABLKP3GDUN-ABLKP4GDUN-ABMP2GDUN-ABMP3GDUN-ABMP4
1SKA 528 000 R02001SKA 528 000 R03001SKA 528 000 R04001SKA 518 000 R02001SKA 518 000 R03001SKA 518 000 R0400
200300400200300400
600600600600600600
141414141414
xxxxxx
xxxxxx
DimensionsH x W x D mm
Joining kit side by side (for connecting two-cubicles or cubicle with side ext. chamber, side by side)Used for Weight
kgOrdering details
Type Code Type No.Panel size 3Panel size 4Panel size 5Panel size 6
GDUN250-AJS3GDUN250-AJS4GDUN250-AJS5GDUN250-AJS6
1SKA 580 000 C10011SKA 580 000 C10021SKA 580 000 C10031SKA 580 000 C1004
700100013001900
300300300300
xxxx
DimensionsH x D mm
Top plate for cable entry or outgoing from topUsed for Weight
kgOrdering details
Type Code Type No.Unikit 250 size 3-6Side extension chamber
GDUN250-ATBTE7GDUN250-ATBTE4
1SKA 590 000 C10071SKA 590 000 C1004
1SKC 020 012 F0001
1SKC 020 013 F0001
1SKC 020 014 F0001
1SKC 020 015 F0001
71SKC802020C0202
Neutral bars kitWeightkg
Ordering detailsType Code Type No.GDUN-A2NBGDUN-A4NBGDUN-A6NB
1SKA 512 000 R00031SKA 512 000 R00021SKA 512 000 R0001
size 3-6size 3-6size 3-6
Suitable forUNIKIT size
250400630
Rating A
The kit contains 3 pcs for L1/L2/L3.
Switch bars kitWeightkg
Ordering detailsType Code Type No.GDUN-ACBVT1GDUN-ACBVT3GDUN-ACBVT4GDUN-ACBVT5GDUN-ACBVT6
1SKA 511 000 R01601SKA 511 000 R02501SKA 511 000 R02551SKA 511 000 R04001SKA 511 000 R0630
size 3-6size 3-6size 3-6size 3-6size 3-6
Suitable forUNIKIT size
T1-160 AT3-250 AT4-250 AT5-400 AT6-630 A
Used for
Earth bars kitWeightkg
Ordering detailsType Code Type No.GDUN-A2PEBGDUN-A4PEBGDUN-A6PEB
1SKA 513 000 R00031SKA 513 000 R00021SKA 513 000 R0001
size 3-6size 3-6size 3-6
Suitable forUNIKIT size
250400630
Rating A
19” rack chassisWeightkg
Ordering detailsType Code Type No.GDUN-ARAC3GDUN-ARAC4GDUN-ARAC5GDUN-ARAC0
1SKA 570 000 C07731SKA 570 000 C10731SKA 570 000 C13731SKA 570 000 C0743
Panel size 3Panel size 4Panel size 5Side chamber
Used for
70010001300700
700700700400
300300300300
xxxx
xxxx
DimensionsH x W x D mm
Distribution Enclosures - UNIKIT 150/250AccessoriesOrdering details (continued)
Main busbar kits for side busbar locationWeightkg
Ordering detailsType Code Type No.GDUN-A402T3SGDUN-A403T3SGDUN-A404T3SGDUN-A405T3SGDUN-A406T3SGDUN-A407T3SGDUN-A602T3SGDUN-A603T3SGDUN-A604T3SGDUN-A605T3SGDUN-A606T3SGDUN-A607T3S
1SKA 510 000 R04021SKA 510 000 R14021SKA 510 000 R24021SKA 510 000 R34021SKA 510 000 R44021SKA 510 000 R54021SKA 510 000 R00011SKA 510 000 R10011SKA 510 000 R20011SKA 510 000 R30011SKA 510 000 R40011SKA 510 000 R5001
size 5size 5size 5size 6size 6size 6size 5size 5size 6size 6size 6size 6
Suitable forCabinet
T3 2T3 3T3 4T3 5T3 6T3 7T3 2T3 3T3 4T3 5T3 6T3 7
OutgoingType Qty.
400400400400400400630630630630630630
BusbarRating A
1SKC 020 016 F0001
1SKC 020 017 F0001
1SKC 020 018 F0001
1SKC 020 019 F0001
81SKC802020C0202
Busbar holder - sheet steelNPE Insulator - 35NPE Insulator - 60Door lock complete with 2 keysDecorative corners kitHinge-set kitDecorative plates - sheet steelPlain flange plateQuick fastener element kitCommon DIN-railWall fixing supports (wall mounted)Document holder (bag A4)UNIKIT busbar insulator 10x30General internal holder, big size 6-holesGeneral internal holder, middle size 4-holesGeneral internal holder, small size 3-holesGeneral back plate
Weightkg
Packingunit
Ordering detailsType Code Type No.GDUN-SBH730GDUN-SIN35GDUN-SIN60GDUN-SCELAGDUN-SCOR20GDUN-SHINGDUN-SSH70FGDUN-SZP55EGDUN-SQF4GDUN-SDIN7GDUN-SWF4GDUN-SBOLAGDUN-SBRIBGDUN-SSDS07GDUN-SSDS04GDUN-SSDS03GDUN-SSDS10
1SKU 054 508 R30801SKU 056 601 R03501SKU 056 601 R06001SKU 059 408 R10021SKU 056 622 R00201SKU 051 902 R70351SKA 517 000 R00011SKU 054 508 R00011SKU 051 901 R00041SKU 053 109 R07001SKU 054 508 R10081SKU 054 508 R20101SKU 056 606 R10301SKA 516 000 R07001SKA 516 000 R04001SKA 516 000 R03001SKA 516 000 R1000
0.40
0.250.150.101.00
107550120102190104131015201
Description
Distribution Enclosures - UNIKIT 150/250Spare PartsOrdering details
GDUNS-QF4
GDUNS-COR20
GDUNS-CELA
GDUNS-HIN
GDUNS-BH730
1SKC 020 020 F0001
1SKC 020 021 F0001
1SKC 020 022 F0001
1SKC 020 023 F0001
1SKC 020 024 F0001
91SKC802020C0202
Distribution EnclosuresUNIKITOrdering Example
GDUN250-AC400
GDUN250-AS1T5M4
GDUN250-ABP1T5M
GDUN-AS4T1M3
GDUN-ABP4T1M
GDUN-AS4T1M3
GDUN-ABP4T1M
Type No.Completation
GDUN250-ASMK4
400
mm
400
mm
300
mm
300
mm
400
mm
Slotted cover for measuring & indication
Slotted cover for MCCB - T1, Middle
Back plate for qty. 4-T1, Middle
Slotted cover for MCCB - T1, Middle
Back plate for qty. 4-T1, Middle
Slotted cover for Incomer T5, Middle
Back plate for MCCB T5, Middle
Plain cover 400 mm Height
1900
mm
UNIKIT
UNIKIT empty, with busbar 400 A provision to fit incomerT5 - 400A MCCB and qty. 8 TPN T1N-160 A MCCB’s asoutgoing. 3-Indication lamps with fuses and measuringinstruments (3 Ameters, 1 Voltmeter + Selector volt)Main busbar 400A vertical, middle location GDUN-A408T1MNeutral bar 400A GDUN-A4NBEarth bar 400A GDUN-A4PEBSwitch bar for T5-400A GDUN-ACBVT5
101SKC802020C0202
Distribution EnclosuresUNIKITComplete enclosed solutions
We have provided below a set of standard solutions using the UNIKITenclosure system.
Load center distribution:
Complete with incoming and outgoing MCCB breakers, earth, neutrals and accessories
Inside components:Incoming MCCB (T3)-250A or T5-400/630AOutgoing MCCB (T1)-up to 160A
Street lighting:
Standard street lighting solution via manual or automatic control with photo cell.The photo-cell is activated when the illumination is less than 35 Lux within 30-60 sec. and turned automaticallyOFF when illumination is more than 125 Lux within the same time period.
Inside components:Incoming MCCB T1-160A with contactor A95Outgoing MCCB T1-up to 160A
RatedCurrent A
Weightkg
Ordering detailsType Code Type No.
250400630
GDUN25-4LC4GDUN40-5LC6GDUN63-6LC8
1SKU 404 152 C10241SKU 406 152 C10241SKU 408 152 C1024
100013001900
700700700
300300300
xxx
xxx
DimensionsH x W x D mm
Outgoingways468
RatedCurrent A
Weightkg
Ordering detailsType Code Type No.
160 GDUN16-5SLG6 1SKU 506 152 C10221300 700 300x x
DimensionsH x W x D mm
Outgoingways6
PHC
111SKC802020C0202
Distribution EnclosuresUNIKITComplete enclosed solutions (continued)
ATS-Automatic transfer switch:
Automatic transfer of power source between the utility network and standby generation.
Sequence of Operation:
Only one source is “ON” in normal case the main source “for example the authority networktransformer” [Q1].
- A standby source “for example standby diesel generator” is ready for any emergency dueto power failure in the main source. [Q2]
- After the recovery of main source [Q1], the standby source is shut down and the mainsource gets its function as well.
- The function can expand to Start/Stop diesel through one extra contact.- Scheduled running test for the diesel to ensure that it will be ready to run at emergencysituations.
Inside components:Incoming MCCB T3-250A with motor and mechanical interlockOutgoing to the customer from busbar
Battery charger BC 130A:
The charger is intended to charge Ni-Cd and lead-acid batteries. The batteries achieve the largest servicelife when remaining at rest in charge condition. The resting condition will realized if the rectifier device takesover the load only in case of mains failure, this operation method is called stand by parallel operation.
Main features:- Soft start on power-up.- Extra stability for active loads.- Peak sensing current limit.- Reduced levels of ripples and harmonics.- The same control module set for whole range.- Extensive range.- More standard features and alarm functions.
Specifications:Input voltage :3-phase 380 V +/- 20%, 50HzFrequency :(47-63 Hz steady state)Output nominal battery voltage : 110VAdjustment range; float charging :90 to 140V set. At 127VAdjustment range; boost charging :110 to 165V set. At 140VAdjustment range; :130 to 170Vmanual or commissioning
RatedCurrent A
Weightkg
Ordering detailsType Code Type No.
250 GDUN25-6ATS 1SKU 600 152 C10261900 700 300x x
DimensionsH x W x D mm
RatedCurrent A
Weightkg
Ordering detailsType Code Type No.
130 GDUN13-6CHGR 1SKU 600 152 C10251900 700 300x x
DimensionsH x W x D mm
F.V. Without Outer Door
TERMINAL
TERMINAL
Standby
Load Breaker Q3
DieselAuthority
Trans
Source-1 Source-2
Q1 Q2
121SKC802020C0202
Distribution EnclosuresUNIKITComplete enclosed solutions (continued)
Isolated power supply circuits model IT-system:
It can be used as associated equipments for isolated power supply circuits which is called IT-system wherethe first letter “I” means insulation from earth or connection of a point (usually the neutral) to earth bymeans of impedance. And the second letter “T” means the exposed conductive parts connected to earth.This applications is more essential for safety.
Inside components:Isolating transformerIsolator with fuse links to protect primary circuit2-pole circuit breaker for secondary circuit protectionInsulating monitoring device IMDIsolator with fuse links for IMD protectionTerminal blocks with wiring trunking.
Weightkg
Ordering detailsType Code Type No.GDUN-5IT 1SKU 504 152 C10271300 700 300x x
DimensionsH x W x D mm
Fuse distribution kiosk:
It is considered as one of the most popular applications for outdoor power distribution in utility.
Inside components:Two feeders Incoming HRC 630A NH3Four feeders outgoing HRC 250A NH2
RatedCurrent A
Weightkg
Ordering detailsType Code Type No.
630 GDUN63-5FU4 1SKU 504 152 C10231300 700 300x x
DimensionsH x W x D mm
Outgoingways4
Contact us
ABB7 Dr. Mohamed Kamel Hussein St.,El Nozha El Gedeida, Heliopolis. Cairo, Egypt.Tel.: + 202 2622 4660Sales Tel.: + 202 2625 1448 - 2625 1446Fax: + 202 2622 2642paul.north@eg.abb.com
www.abb.com/mea/lowvoltage
As part of its on-going product improvement, ABB reservesthe right to modify the characteristics or the productsdescribed in this document. The information given is not-contractual. For further details please contact the ABBcompany marketing these products in your country.
No:
1SK
C80
2020
C02
02 -
Prin
ted
in E
gypt
(Feb
. 200
9) -
ein
adv
ertis
ing
desi
gns