Stoichiometry and the Mole

Post on 04-Jan-2016

84 views 5 download

description

Stoichiometry and the Mole. The Scenario. You are planning to do a reaction using hydrochloric acid. Suddenly, you drop the bottle and spill all 13grams of your very dangerous acid on the floor! - PowerPoint PPT Presentation

Transcript of Stoichiometry and the Mole

Stoichiometry and the Mole

The Scenario

• You are planning to do a reaction using hydrochloric acid. Suddenly, you drop the bottle and spill all 13grams of your very dangerous acid on the floor!

• You know it can be neutralized (so that it stops eating through the floor) by sodium hydroxide, but you need to know how much sodium hydroxide you need to completely get rid of all of the acid. How do you do this??????

The acid spill…

• You know that:– HCl + NaOH ----> NaCl + H2O– Very dangerous ---> Very harmless

• You also know you have 13 g of HCl• Wouldn’t it be nice to know how much one

atom of an element weighed!• The big problem is that elements have

different isotopes.

Isotopes?

• What is an isotope?

• Atoms of the same element with different numbers of neutrons.

• Ex. Hydrogen-1, Hydrogen-2, Hydrogen-3

• 1H, 2H, 3H

Average Atomic Mass

• The average atomic mass for all elements are shown on the periodic table.

• The periodic table shows the AVERAGE weights of all isotopes.

Atomic Mass Units

• All masses for atoms on the periodic table are in amu’s.

• 1 amu = 1.66 x 10-24g

Formula Mass (Weight)Molecular Mass (Weight)

• Formula mass (aka molecular weight) is the mass of one molecule.

• Formula mass =

atomic masses of elements x subscripts

Find the formula mass of water.

• Water is H2O• From periodic table H --> 1.008 amu’s• From periodic table O --> 16.00 amu’s• BUT there are 2 H’s and only 1 O in H2O• Solution:

– H --> 2 x 1.008 = 2.016 amu– O --> 1 x 16.00 = 16.00 amu

+ Add these together

18.02 amu

Find the formula masses for the following:

• CO2

• K2CrO4

• NH4

• (NH4)3PO4

• H3PO4

Percent CompositionPercent composition is the percent by weight of each elementin a compound.

Step 1: Find the formula mass of the compound..

Step 2:

% Composition = Total mass of element X 100 Formula mass of cmpd

Percent Composition • What percentage of the total mass is

taken up by one type of atom?

• % comp = [mass of atoms in questions]

[formula mass]

• What percentage of total mass do EACH of the types of atoms in water contribute?– Hint: Water has 2 types of atoms, hydrogens

and oxygens, so you are doing 2 separate problems here.

X 100

Percent Comp. Of Water• 1. For each element, multiply atomic mass by subscript:

– H2 2 x 1.008 = 2.016– O 1 x 16.00 = 16.00

• 2. Find formula mass: – 2.016 + 16.00 = 18.02 amu

• 3. Plug in to percent composition for each element present.

• H --> [2.016] / [18.02] = 11.19 %• O --> [16.00 / 18.02] = 88.79 %• Notice they add up to nearly 100% (only nearly because

of error)

What is percent comp. For OXYGEN in each of the

following?

• CO2

• K2CrO4

• NH4

• (NH4)3PO4

• H3PO4

A Mass Challenge

• 1. How many grams of oxygen are in 237g of H3PO4?

• 2. How many grams of hydrogen are in 360g of (NH4)3PO4?

• 3. How many grams of copper are in 296g of Cu(OH)2?

Introducing…The Mole!!!

The Mole

• 1 mole = 6.022 x 1023 particles.

• A mole is the “unit if measure.

• 6.02 x 1023 is called Avogadro’s Number.

Avogadro’s Number

No! Not avocado - Avogadro!

Mole Conversions

• How much does one mole of hydrogen atoms weigh in grams?

• Recall: 1 amu = 1.66 x 10-24g

So, 1 atom of H weighs 1.008 amuAND 1 mole of H atoms weighs 1.008 g

Conversion options with the mole

1 mole = 6.022 x 1023 particles 1 mole of atoms = mass on per. table in

grams1 mole = 22.4 L (at STP & for gases only!!)

STP is standard Temperature (273 K) & Pressure (1 atm)

Molar Mass (aka Gram formula Mass)

1 mole CO2 = 6.02 x 1023 molecules CO2

1 mole CO2 = 22.4 L CO2 if at STP

How many grams does 1 mole of CO2 weigh?

C = 1 x 12.01 = 12.01g

O= 2 x 16.00 = 32.00g+

44 . 01 g / mole of CO2

Molar Mass Practice

• 1. What is the gram formula mass for K2CrO4?

• 2. Molar mass for (NH4)3PO4?

149.12 g/ mole (NH4)3PO4

Volume and the Mole

• 1. How many moles are in 38L of carbon dioxide at STP?

• 2. How many liters are in 6.4moles of oxygen at STP?

Particles and the Mole

• 1. 1.20 x 1025 atoms of P = How many moles of P?

• 2. 0.750 moles Zn = How many atoms of Zn?

• 3. How many moles are in 9.2x 1020 molecules of CO2?

Mole Conversions Practice

• 4. How many grams are in 9.2 x 1020 molecules of CO2?

• 5. How many grams are in 57.2 L of hydrogen gas at STP?

So what is “MoleAmerican Airlines” Representing?

• Interpreting Chemical Equations• What does a chemical equation ACTUALLY tell you?

What does it all mean?• Ex: N2(g) + 3H2(g) ---> 2NH3(g)• This says that 1 molecule of N2 reacts with 3 molecules

of H2 to give 2 molecules of NH3 gas.• Let’s say you have 1 mole of nitrogen gas and an

unlimited supply of hydrogen gas– 1. How much of the hydrogen gas will react with the nitrogen

gas?– 2. How much ammonia gas can you make?3 moles

2 moles

I. Intro to Stoichiometry

Stoichiometry is the process of calculating the amount of substances produced in a chemical reaction.

When you know the amount of one substance, you can determine the amount of the other reactants or products.

II. Mole Ratios

N2 + 3H2 2NH3

Coefficient represent the number of moles of that substance.

Mole ratios are written in fraction form.

N2 + 3H2 2NH3

• Mole ratios:1 mol N2

3 mol H2

or3 mol H2

1 mol N2

1 mol N2

2 mol NH3

or 2 mol NH3

1 mol N2

3 mol H2

2 mol NH3

or 2 mol NH3

3 mol H2

Left sideReactants:

Right sideProducts:

Right sideProducts:

Mole Road Map

Grams A Moles A Moles B Grams B

Use Molar Mass

Use Mole Ratio

Use Molar Mass

IV. Mole to Mole Stoichiometry

Ex. Determine the number of oxygen moles required to burn 1.20 moles of ethyl alcohol, C2H5OH.

C2H5OH + 3O2 2 CO2 + 3H2O

Step 1: Balance equation. (This is already balanced!)Step 2: Write the given amount of the chemical – this is your “moles A.”Step 3: Use the mole ratio from the balanced equation.

1.20 mol C2H5OH 3 mol O2

1 mol C2H5OH = 3.60 mol O2 Answer

(Moles A to Moles B on roadmap)

1.2 mol A ?mol B

Mole Road Map

Grams A Moles A Moles B Grams B

Use Molar Mass

Use Mole Ratio

Use Molar Mass

V. Mole to Mass Stoichiometry

(Moles A to Grams B on roadmap – Just one more step to the problem we just did!)

Ex. Determine the grams of oxygen required to burn 1.20 mol of ethyl alcohol, C2H5OH.Step 1: Write a complete balanced equation.Step 2: Write the given amount.Step 3: According to the mole road map, you need to go from: Moles A Moles B Grams B

1.20 mol C2H5OH 3 mol O2 32 g O2

1 mol C2H5OH 1 mol O2 = 115 g O2 Answer

Mole-Mole Problems

• Balanced chemical equations, through their coefficients indicate the ratio of moles of reactants and products.

• 1. Aluminum and oxygen react to form aluminum oxide. If you have 2.3 moles of aluminum oxide after the reaction how many moles of aluminum were used?

• STEP 1: Write the balances equation:• 4Al + 3O2 ---> 2Al2O3

Mole-Mole Problem cont.• STEP 2: Do dimensional analysis starting with

what you know to convert moles of aluminum oxide to moles of aluminum. – Aluminum and oxygen react to form aluminum oxide.

If you have 2.3 moles of aluminum oxide after the reaction how many moles of aluminum were used?

– 4Al + 3O2 ---> 2Al2O3

Now you try a mole-mole problem

• 2. Hydrogen gas and oxygen gas react to make water. If you have 3.24 moles of hydrogen gas and an unlimited supply of oxygen gas, how many moles of water can you make?

• H2 + O2 ---> 2H2O

Mole-Mass Problems

• You have 2.4 moles of Al reacting with oxygen. How many grams of Al2O3 are produced?

• STEP 1: Write your balanced equation

• 4Al + 3O2 ---> 2Al2O3

• STEP 2: Do dimensional analysis starting with what you know to convert moles of aluminum oxide to moles of aluminum.

Mole-Mass Problems- you try:

• You have 6.7 moles of oxygen gas reacting with unlimited supply of hydrogen. How many grams of water are produced?

• H2 + O2 ---> 2H2O

Mole Road Map

Grams A Moles A Moles B Grams B

Use Molar Mass

Use Mole Ratio

Use Molar Mass

Mass-Mass Problems• Dicarbon Dihydride reacts with oxygen gas

to produce carbon dioxide and water. How many grams of oxygen gas will react completely with 13.0g of C2H2?

• STEP 1: Write the balanced equation.

• 2C2H2 + 5O2 ------> 4CO2 + 2H2O

• STEP 2: Do dimensional analysis.

You try: Mass-Mass Problem

• CaC2 reacts with water to produce C2H2 and calcium hydroxide. If 51.6g of CaC2 are reacted, how many grams of calcium hydroxide are produced?

• CaC2 + 2H2O ---> C2H2 + Ca(OH)2

Theoretical, Experimental, & Percent Yields

Theoretical yield is the amount of product that you mathematically determine (using stoich) from a chemical reaction.

Experimental yield is the amount of product that you actually getwhen you perform the reaction in lab.

Percent yield = Experimental Yield x 100 Theoretical Yield

Calculating Chemical Formulas

• Empirical Formulas: Simplest whole number ratio of atoms in a compound

• Ex: C6H12O6 is a molecular formula. The empirical formula is CH2O.

Determining Empirical Formulas

• Step One:Convert grams to moles. • Step Two: Divide each by the smallest number of moles

to get subscripts• Step Three: If you do not have a whole number,or one

that is reasonably close, multiply by an integer to obtain a whole number.

Empirical Formula

• Hg--> 67.6g x 1mole = .337 moles Hg 200.59g

• S --> 10.8g x 1mole = .337 moles S 32.06g

• O --> 21.6g x 1mole = 1.35 moles O 16.00g

Now divide each by the smallest number of moles

/ . 337 = 1

/ . 337 = 1

/ . 337 = 4

These are your subscripts for your formula! HgSO4

Empirical Formula from %cont…

• Problem 2: After doing several experiments on an unknown substance it was found that the percent compositions for the compound were: 3.09% H, 31.6% P, and 65.3 % O. What is the empirical formula for this substance?

H3PO4

Empirical Formulas if given mass.

• STEP 1: Turn mass into moles• STEP 2: Divide by lowest number of moles to get

subscripts.• Problem 1: A 19.12 gram sample of an unknown

chemical was discovered. After much experimentation it was determined that the unknown was made of 3.03g of hydrogen and 16.09g of oxygen. What is the empirical formula?

H3O

Molecular Formulas

• This is the exact formula of the molecule giving types of atoms and numbers of each type. This formula represents how the compound actually appears in nature.

• You will need to be able to determine the molecular formula using data.

Determining Molecular Formula• Example problem: A compound has a molar mass

(gfm) of 120.00 g/mole with an empirical formula of CH2O. What is the molecular formula?

• STEP ONE: Find the molar mass (gfm) of the empirical formula

• STEP TWO: Divide true molar mass (gfm) by gfm of the empirical formula.

• STEP THREE: Write the molecular formula by multiplying subscripts by answer to step 2.

120.00 / 30.03 = 3.996 ~ 4

C[1x4]H[2x4]O[1x4]C4H8O4

Molecular Formula Problem

• A compound with the empirical formula C2H5 had a molar mass of 87.21g/mole. What is the molecular formula?

C6H15

Hydrated Compounds

• A Hydrated Compound is a compound that crystallized from a water solution with water molecules adhering to the particles of the crystal.

• Chemists use heat to dry these compounds and then calculate the ratio of the compound to water.

Hydrates Cont…• Example: NiSO3 6H2O The dot shows

that 6 water molecules adhere to each formula unit.

• To calculate the molar mass of a hydrate add the molar mass of the anhydrous compound to the mass of the water present.

Empirical Formulas of Hydrates• Step 1: Find the moles of anhydride (compound

without water)

• Step 2: Find the moles of water.

• Step 3: Divide moles of water by moles of anhydride. This should turn out to be a whole number

• Step 4: Place this whole number into the formula in front of water.

Empirical formula of a hydrate practice

• What is the formula of a hydrate which consists of 0.391 g of Li2SiF6 and 0.0903 g of water?

• Your formula will be Li2SiF6 ____H2O• Step 1: .391 g Li2SiF6 x 1 mole Li2SiF6 = .00250 mole

155.97 g Li2SiF6

• Step 2: .0903 g H2O x 1 mole H2O = .00500 mole H2O 18.02 g H2O

• Step 3: .005 mole / .0025 mole ~ 2Li2SiF6 2H2O

% water in a Hydrate

• Step 1: Find the molar mass of the hydrated compound.

• Step 2: Divide the mass of water by the mass of the hydrate and multiply by 100.

Hydrates: Practice Problem

• What is the formula and % water of a hydrate which consists of 9.520g of BaI2 and 0.887 g of water?

BaI2 2H2O 8.43%

It’s the Holidays… Lets talk Cake!

• Let’s say you want to make as many cakes as you can for the holiday season. You don’t have time to go to the store, so you take inventory of what you have in your pantry.

Cake Inventory

• You Have:• 1 dozen eggs• 5 cups oil• 12 cups flour• 3 cups sugar• 4 boxes cake mix• Unlimited supply of

water

• Each cake needs:• 1 egg• 1/3 cup oil• 1 cup flour• 1/2 cup sugar• 1 box cake mix• 1/2 cup water

How many cakes can we make?What ingredient limits us?

4Cake mix

A Limiting Reagent Analogy

So, Cake mix was our limiting reactant (aka limiting reagent)!This also works with sandwiches!

All other ingredients besides the limiting reactant are said to be in excess

Limiting Reactants

STEP 1: Write the balanced equation!

STEP 2: Find desired product in grams. You Will need to do 2 stoich problems.

STEP 3:The reactant that gives you the smaller amount of product is the limiting reactant.

Limiting reactant is the chemical in a reaction that restricts how much you can make, it’s the reactant that runs out first.

Hint: You will know if you are working with a limiting reactant problem if you are given two quantities of two reactants or if one isgiven in excess.

Working Limiting Reactant Problems

• Ex: How many grams of lithium nitride can be made by reacting 56.0g of nitrogen with 56.0g of lithium?

• STEP 1: Write the balanced equation!

• N2 + 6Li ----> 2Li3N

• STEP 2: Convert each reactant to what you are looking for.

Final steps of LR problems• STEP 3: The smallest amount found is

the maximum amount you can produce using the materials you have.

• The limiting reactant is the reactant that gives you the least amount of product

• So, Li is my limiting reactant and I can make a maximum of 93.7 g Li3N.

LR Sample Problem• Ethylene, C2H4, burns in air according to

the following unbalanced equation.

• C2H4(g) + O2(g) ----> CO2(g) + H2O(g)

• How many grams of CO2 can form when a mixture of 2.93g of ethylene and 5.29g of oxygen are reacted?

•C2H4(g) + 3 O2(g) ---->2 CO2(g) + 2 H2O(g)

•O2--> 4.85g CO2 possible

•C2H4--> 9.19g CO2 possible

4.85g CO2 can be formed based on LR which is O2.

LR Sample #2

• If 40.0 g of a Pb(NO3)2 solution are mixed with 37.0g of a NaI solution, how many grams of bright yellow PbI2 form?

Pb(NO3)2 + 2NaI ---> PbI2 + 2NaNO3

Pb(NO3)2 ---> 55.7 g PbI2 possibleNaI ---> 56.9 g PbI2 possibleSo, Pb(NO3)2 is our L.R.

We make 55.7 g of PbI2