Transcript of Sticker Reorder Point
- 1. Sticker Reorder Point How to change the sticker re-order
point in the CompuSpections SIRPA program. This feature provides a
warning to users of the remaining safety stickers in the system
when user reorder point is reached.
- 2. The CompuSpections SIRPA program provides a warning of
remaining safety stickers available
- 3. Select the available sticker button
- 4. Available Stickers are displayed below the hand written
button
- 5. FINISH BY SELECTING BACK TO THE WORK ORDER BUTTON
- 6. Select the Station Button to Change the Sticker re-order
point at which time the CompuSpections system will warn about the
number of stickers left
- 7. SELECT EDIT
- 8. Note the current reorder point is 7
- 9. Change to the new RE-ORDER point
- 10. SELECT APPLY
- 11. FINISH BY SELECTING BACK TO THE WORK ORDER BUTTON
- 12. For Additional information Contact Customer Support
866-410-7477