Step By Step / LightPacking with PadPak® / Packaging EngineeringStep By Step / Light he Paer...

Packing with PadPak® / Packaging Engineering

Step By Step / Light

The Paper Packaging Experts™

10 BaSic tipSfor paper packagingwith youtube instruction movies

1Packing with PadPak - Packaging Engineering

Preface

Over the years Ranpak has become more than just a supplier of packaging systems.

One of the key elements of the success story of Ranpak is the offered Added Value

Services.

The Ranpak Packaging Engineering department is often challenged to pack very

specific products in PadPak packaging pads. These products are often not that easy

to pack, because they are heavy, fragile or just have a complicated shape. The last 15

years we have made hundreds of packaging examples.

This booklet shows some of these examples, categorized in industries. We tried to pick

not only interesting products, but also interesting applications of the paper. You will find

all packaging techniques possible with PadPak in the examples. The booklet will show

which converter actually was used to pack these products, but will also show alterna-

tive converters that could be used as well for these kinds of products.

On top of that we added packaging tips. 10 Basic tips to improve the quality, speed,

appearance and easiness of your package. Most packaging tips can even be found in

a small movie on YouTube. Just scan the QR code; for the digital version of this book-

let just touch the QR code.

For the digital version of this booklet, to go to a specific product, just touch the picture

of the product in the Index. It will automatically take you to the specific example.

Enjoy the booklet.

Erwin Methorst

Manager Packaging Engineering department

www.ranpakeurope.com/packagingengineering

10 11 13

14 15 16 17 18

19 20 21

Steering unit Cylinder head Light Radiator Engine

Voice recorder Turbine wheel Big Shaft

Computers

China cups Aquarium Ceramic dish

26 27 28Monitor Printer Transformator Cable device

Scanner

Electronics

TV Screen

Basic 4 For high, flat products use 4 coils in the

corners.

Basic 5 Try to fixate

products as much as possible.

Basic 6 Use enough bottom protection packing fragile products.

Basic 7 For long narrow

products, use coils at the end.

Basic 8 Manually

creating and closing a coil.

Preface IndexBasic 1

Pad directions for square and round shaped

products.

Basic 2 Always push

product together with crossed pads.

Basic 3 A void bigger

than 8 cm, use the pads upright.

Basic 9

Determine pad density.

Basic 10 Use the flexibility

of the paper.

Audio & Video Automotive

Aviation Ceramics

Please turn over the

34 35 36 37

Honey products

Small bottles Olive oil FireplaceVacuum cleaner

Meat cutter

30 31 32Telecom Cash reader Solar inverter

39 40 41

Chair Drive Industrial valve

Industrial valve

Houseware

Industrial

43 44 45

Test equipment

Valve blockIndustrial valve

Instruments

Lights

147Drainage

Medical

49Liquid container

Bottles 50 151Paint bucket 52Bike front

1Battery 54Roof tile Roof tile Wheelchair53 55 56

Promotional

60 61 62 63

Mirror Wash basin China sink

64 65 66Welding spools Toys Play cabinet Helicopter

Resque cutter

57 58 59Trophy Frame Sign

Sanitary

Basic step of Paper Packaging

For square shaped products use diagonal crossed pads. For round shaped products use straight crossed pads.

For square products it is important to protect the corners. Therefore you should place

diagonal crossed pads exactly there where they should offer protection. For round

products the corners are not that important, because the distance between product

and box is biggest at the corners. It is better to place the pads at the spot where the

distance between product and box is smallest.

Watch the video on our Academy YouTube Channel “Basic step 1 of paper packaging”

Always push product together with crossed pads in box.

Doing this you can see that the pads will form itself around the product. Pushing in the

pads first and the product after will be more difficult to get the product in.

Voids bigger than 8 cm, use the pads upright.

Use the strength of the “wave” in the

middle of the pad. For extra strength

use spirals and “snakes”. Use flat pads

only for small voids. To make it easy to

remember 2 pads flat okay, 3 pads flat,

use a coil instead.

For high, flat products use 4 coils in the corners of the box.

Ideal solution for products like radiators, windscreens and TV-sets. Vary the height of

the coils by playing with the density of it. Make sure that the coils on top stick out a bit.

When closing the box, the pads are slightly under pressure and therefore the product

is fixated and cushioned ideally.

Try to fixate products as much as possible

By fixating products in the box, the products are packed in a better way with less

material. Fixating is the best way to save on material costs.

Use enough bottom protection when packing fragile products.

Remember, if a box gets an impact, the highest chance (70%) that it will be at the

bottom (bottom corner, bottom edge or flat bottom). Therefore divide as follow: 1/3 of

the packaging material on top; 2/3 underneath the product.

= Protective layer

2/3 = cushioning

For long, narrow products use small coils at the ends (and middle)

Sandwiching a long product between

coils is a very fast, economic and

flexible way to secure your product.

TIPS & TrICkS

Use a coil to get the maximum

cuschioning effect of the paper

For lighter products use loose

coils, for heavy products use

dens coils.

Manually creating and closing a coil

To keep a coil together, just coil the pad to a spiral, then open up the ends of the paper

and push them into the coil. Now your coil does not open anymore.

Determine pad density

The density of a coil or a snake can be adjusted to light or heavy products. Use coils or

snakes with a higher density for heavy products, a lower density for light weight products.

Use the flexibility of the paper

PadPak® is a flexible packaging material. With a flat pad from the machine it is easy to

make coils, corner pads, snake pads or wrap the flat pad in between the products to

avoid contact.

Packaging Examples

The Paper Packaging Experts™

13 Packing with PadPak - Packaging Engineering

Audio & Video

TV Screen

Meters of paper used: 29,5 meters 70/70 gr

Audio & Video

Automotive

Power steering unit

Meters of paper used: 4.8 meters 70/70 gr SR

Cylinder head

Meters of paper used: 5.7 meters 70/70 gr

Automotive light

Automotive radiator

SRCC LC

Engine

Meters of paper used: 20 meters 70/70 gr

Aviation

Heavy voice recorder

Aviation

Large Turbine wheel

Heavy big shaft

Aviation

Ceramics

China cups

SRCC LC

Aquarium

Meters of paper used: 12.5 meters 70/70 gr LC

Ceramic dish

Meters of paper used: 3 meters 70/70 gr CC LC

Computers

A0 scanner (1.2 meters wide)

puters

Monitor

Printer with extra cartridge

Meters of paper used: 16 meters 70/70 gr SR

puters

Electronics

Transformator

Cable device, computer supply

Electronics

SRCC LC

Telecom equipment

Cash reader

Electronics

Very heavy solar inverter

Meters of paper used: 24 meters (first three) or 21 meters (last 3) 70/70 gr SR

Meters of paper used: 1.5 meters 70 gr

Honey Products

Small bottles

Olive oil bottle

Houseware

Fireplace

Vacuüm cleaner

Meters of paper used: 9 meters 70 gr

Houseware

Meat cutter

Houseware

Chairs

Industrial

Industrial valve

Industrial

Industrial valve

Meters of paper used: 6,25 meters 70/70 gr

Industrial valve

Industrial

Hydraulic valve block

Instruments

Test equipment

Instruments

Industrial light

Meters of paper used: 3.75 meters 70/ gr

Lights

Medical

Drainage

Meters of paper used: 1 meters (small box), 6 meters (large box) 70/70 gr SR

Medical

Medical arm

Medical liquid container

Medical

Two chemical bottles

CCMeters of paper used: 5.5 meters 70/70 gr SR

Paint bucket

Mountain bike front suspension

Bicycle battery

roof tile

Wheelchair

Promotional

Trophy

Promotional

SRCCLC

Promotional frame

SRCCLC

Promotional sign

Meters of paper used: 2.1 (small box), 6 meters (large box) 50/50/50 gr

Promotional

Sanitary

Bathroom mirror

Wash basin

Sanitary

China sink decorative

resque cutter

Heavy welding spools

role play cabinet

remote controlled helicopter

LC SRCC

Ranpak BV | T +31 455470470 | E info@ranpakeurope.com | www.ranpakeurope.com

Step By Step / LightPacking with PadPak® / Packaging EngineeringStep By Step / Light he Paer...

Documents

Transcript of Step By Step / LightPacking with PadPak® / Packaging EngineeringStep By Step / Light he Paer...

Guide to Saving Money on Packaging 5 Steps to Better Packaging · Step 1 Make a master spreadsheet of your current packaging materials and costs, including labor. Although this step

STEP-BY-STEP APPROACH TO OPTIMIZE COMPLEX PRODUCTION ... · Goal: Less unplanned Downtime At P&G Rothenkirchen, the reliability of packaging lines has increased dramatically in recent

SM8 Packaging Guidelines Step-by-Step(continued) – Engineered foam enclosures • Should be preformed for specific products for proper cushioning performance. • Materials may include

Packaging the 1st Step in Brand Building

PACKAGING OF AGRICULTURAL PRODUCTS...Vacuum packaging Nitrogen exchange packaging Oxygen absorber packaging Food additives Cushioning packaging Flavor-keeping packaging Moisture-proof

Notes - Packaging without packaging

HIV Life Cycle Step 1: Fusion Step 2: Transcription reverse transcriptase Step 3: Integration Step 4: Cleavage Step 5: Packaging and Budding HIV.

Packaging Rolls & Packaging Bag

Starview Packaging Machinery | Skin Packaging Machinery€¦ · Starview Packaging Machinery | Skin Packaging Machinery Author: Starview Packaging Machinery inc. Subject: Starview

Operator manual PadPak CC - Nefab Packaging AB · PadPak® CC PadPak® CC Operator Manual - EN i EN PREFACE i This operator manual is made in the original language. This operator

Faster Throughput, Cost Effective Solution · The PadPak LC is the fastest paper cushioning solution on the market. The high output allows a maximum box throughput. The converter

DNA Wrap: Packaging Matters An Introduction to Epigenetics ... · 5. Review student answers to Step 2 before proceeding to Step 3. 6. Next, introduce students to the concept that

Faster Throughput, Cost Effective Solution · 2018-12-10 · The PadPak LC is the fastest paper cushioning solution on the market. The high output allows a maximum box throughput.

STEP BY STEP INSTALLATION INSTRUCTIONS Wood Blinds...We recommend you hold on to all packaging until your blinds are fully installed Should something go wrong (we strongly . doubt

Equipment and Automation Protective Packaging · Protective Packaging Innovative Protective Packaging Solutions Victory Packaging provides innovative packaging solutions that deliver

Labeling and Packaging - gba-group.de · ant and effective packaging design and supply chain ma-nagement solutions. The labeling of clinical supplies is a critical step in the sup-ply

snack food packaging solutions - Ishida Europe...snack food packaging solutions (E) Snacks 06.13 Working with you every step of the way helpline • spares • service • training

Cabot Shipping - Protective Packaging Flyer Ship… · WrapPak® Converter • 60”W x 24”D x 28”H • 256 lb • 290W • 110-240VAC Protective Packaging Padpak Paper Perfect

FSSC 22000 Packaging FSMS Implementation Workbook … 22000 Packaging FSMS...FSSC 22000 Food Packaging Safety Management System Implementation Workbook © 2 Step One: ISO 22000 & ISO

DUNApAckPadPak® system is particularly designed for industry, distribution, and applied logistics. PadPak® Jr PadPak® CC PadPak® LC PadPak® Sr PadPak® JR is the best solution