Post on 19-Jul-2020
SINGLE LEVER KITCHEN FAUCETStep 4 Parts list
RECOMMENDED TOOLS
Attention:for easy installation, you will need:1.To read all the installation instruction completely before
beginning.2.To read all the warning, attention and maitenance
information.3.To purchase the proper supply lines.
The tools might be applied to the following places:
SINGLE LEVER KITCHEN FAUCET
Channel LocksAdjustable Wrench Goggles
GICASA
Adjustable Wrench Allen key
WARNING:Please keep thetools for futureuse!
Teflon tape
Gasket
13
Screw
14
Lock nut
NO. PART NAME
Shower hose1
2 Washer
3 Shower
4
5
6
Base
7
Flexible hose
8
Connector
9
Washer
10
Weight
12
11
Body
Washer
Washer
7
6
5
4
8
9
10
12
11
13
1
2
14
3
Tips:Plastic base only fixed under the
sink when installing kitchen faucet
Step 2 Checking and testingStep 1 Faucet installation
2 2
2.Check all connections at arrows for leaks, re-tighten it if necessary.
BUT DON'T OVERTIGHTEN
Step 3 Cleaning and care
Daily cleaning and care are required in order to keep the product shining and
properly working.
1
2
3
4
Clean it with water and dry it with soft cloth.
Clean the product with gentle liquid or glass cleaner.
Don't use acid cleaner.
Don't clean with abrasive material, abrasive paper or knife.
1 1
1.Remove the shower by hand. Turn the faucet handle all the way on, turn on hot and cold water supply and flushwater lines for one minute. Reinstall shower by hand.
1.Position the faucet in order on the counter top as shown. . Assemble gasket assembly and
lock nut to faucet threaded sleeve by hand and tighten the screws with screwdriver.
2.Connect the shower hose to quick connect.
Dis-assemble the weight and put it on the shower hose. Then fix screws by
screw driver.
Don't forget the O-ring
CAUTION: MAKE SURE THE HOSE IS PROPERLY ENGAGED AND
SECURED IN THE QUICK CONNECT.
3 4
A. B.
Warning: The supply valves are not included, please purchase them in plumbshop.
3.Connect the flexible hoses to water supply valve , and tighten it with adjustable
wrench.
Caution: make sure connect the hot and cold flexible hose to supply valves correctly.
DON'T OVER TIGHTEN!
4. 1/2") +(A) 3/8") (B) 3/8") +Flexible hose( Flexible hose( Connector(3/8"- Washer = Flexible hose(1/2")
1/2"3/8"Tips:
,please DO NOT disassemble any part from product when open the box otherwise
it may cause functional problem when using.
If you receive the physical product and there are subtleties is not consistent with
the picture, because we do upgrade improved products to make the products
more beautiful and lasting longer.
Plastic base only fixed under thesink when installing kitchen faucet
14
9
10
1
12
11
4
13Weight here
1
8