Post on 06-Oct-2020
Steel Construction Certification Scheme
Certification and CE marking -excellence and quality is standard
* NHSS 19A, NHSS 20, NHSS 3 and FPC assessments are available at minimal additional cost whenincluded with a Quality Management System audit.
Why are these systems important? Why choose SCCS?SCCS is a sector specific organisation dedicated entirely to structural steelwork andassociated activities
SCCS understands your processes
SCCS is UKAS accredited
SCCS is a Notified Body
SCCS provides a one-stop-shop for all your certification needs
SCCS provides an effective way for you to CE Mark your products
SCCS was established in the early 1980’s and has tremendous experience in the sector
SCCS has an auditing team who are cross trained across all necessary disciplines
SCCS is committed to quality, impartiality and objectivity
UKASThe United Kingdom Accreditation Service (UKAS) is the sole national accreditationbody recognised by government to assess, against internationally agreed standards, organisations that provide certification, testing, inspection and calibrationservices. Accreditation by UKAS demonstrates the competence, impartiality andperformance capability of these evaluators and means they have been assessedagainst internationally recognised standards to demonstratetheir competence, impartiality and performance capability.
By using an UKAS accredited certification body a clientsignificantly reduces the risk of selecting an incompetentevaluator and paying for, or more seriously, risking clients notrecognising the validity of the assessment.
Contact usTo discuss your needs and find out more about theservices on offer from SCCSplease call 020 7747 8134 or visit our websitewww.steelconstruction.org/sccs
CompleteapplicationTo apply for one or more of our services, simplyregister and complete an application online atwww.steelcertification.co.uk
QuotationOn receipt of yourapplication, we willprovide a quotation for our services
Gap analysis(optional)Less experienced clientsmay wish to take advantageof a preliminary assessmentand gap analysis todetermine readiness fora full audit
Stage OneThe process begins witha documentation reviewand preparation for thecertification audit
Stage TwoThe certification audit takesplace to determine whetheryour systems meet therequirements of the standard.For FPC assessments, youcan now CE mark yourproducts.
Surveillance cycleThe certification lasts for threeyears before a full audit isrequired again. Surveillancevisits take place once or twiceper year dependent on the sizeof your operations.
Quality Management System• Preferred status for
tenders
• Improved internal working
• Winning more business
• Less costly errors andre-work
• Enhanced status
• Better communicationsand motivated staff
• Improved customersatisfaction and loyalty
• Preferential insurancepremiums
• Increased profitability
• Competitive advantage
EnvironmentalManagement System• Better management of
environmental risks, nowand in future
• Increased access to newcustomers and businesspartners
• Demonstration of legaland regulatory compliance
• Potential for reducedpublic liability insurancecosts
• Overall cost savings: interms of consumption,waste and recycling
• To meet supply chainrequirement and/or qualifyfor a tender or preferredsupplier status
Occupational Healthand SafetyManagement System• Reduced risk to
employees, customersand suppliers
• Reduction in the costsassociated with accidentsat work
• Enhanced staff moraleand motivation
• Demonstration of legaland regulatory compliance
• Enhanced status andcompetitive advantage
• Reduced insurancepremiums
• To meet supply chainrequirement and/or qualifyfor a tender or preferredsupplier status
Who are we?The Steel Construction Certification Scheme (SCCS) is the Certification Bodyspecifically for companies engaged in the design, manufacture and installation ofstructural steelwork and its associated products and services. SCCS is a whollyowned subsidiary of the British Constructional Steelwork Association Ltd (BCSA).
The objective of the Scheme is to secure high standards of excellence and qualityacross all processes, procedures and practices in the steelwork industry throughindependent certification to specific standards.
What we doAs a UKAS Accredited Certification Body, SCCS provides certification of:
Quality Management Systems to BS EN ISO 9001
Environmental Management Systems to BS EN 14001
Occupational Health and Safety Management Systems to BS OHSAS 18001
National Highways Sector Scheme 19A* for corrosion protection of ferrous metals byindustrial coatings
National Highways Sector Scheme 20* for the execution of steelwork in transportationinfrastructure assets
National Highways Sector Scheme 3* for stocking and distribution activities formechanical fasteners
As a Notified Body, SCCS offers certification audits of:
Factory Production Control* systems in accordance with the requirements for CE Marking to BS EN 1090-1
SCCS performs assessments and gap analysis for clients preparing their FactoryProduction Control systems
Why choose SCCS for your CE Marking certification?
Steel Construction Certification Scheme Limited4 Whitehall Court, Westminster, London SW1A 2ESTel: +44 (0) 20 7839 3980Fax: +44 (0) 20 7747 8199Email: sccs@steelconstruction.org
www.steelconstruction.org
Welding Certificate 2273 – CPD - xxxx
In compliance with EN 1090-1:2009, table B.1, the following has been stated:
This Welding Certificate is an
annex to the EC-Certificate of the Factory Production Control (FPC) 2273 – CPD - xxxx.
This Welding Certificate is only valid in conjunction with the aforementioned EC-Certificate in the scope of the
Construction Products Directive or CPD. Manufacturer
XXXXX Facilities of the Manufacturer XXXXX
XXXXX
XXXXX Standard
EN 1090-2: 2008
Execution Class
up to EXC X according EN 1090-2:2008
Welding Process(es)
XXX – XXXXXXXXX
XXX – XXXXXXXXX Base Material(s)
XXX, XXX, XXX according EN 10025-2
XXXX according EN 10025-6
Responsible Welding Coordinator XXXXX
Substitute
None Attestation
This certificate attests that all procedures for the execution and surveillance of
welding works are implemented.
Date of first isue XXX
Date of next Surveillance
XXX Validity Period
This certificate remains valid as long as the conditions laid down in the technical
specification in reference (in connection with EN 1090-1:2009) or the
manufacturing conditions in the factory or the FPC itself are not modified
significantly.
Chairman:
Scheme Manager:
Steel Construction Certification Scheme Limited
4 Whitehall Court, Westminster, London SW1A 2ES
Tel: +44 (0) 20 7839 3980
Fax: +44 (0) 20 7747 8199
Email: sccs@steelconstruction.org
www.steelconstruction.org
EC Certificate
of
Factory Production Control (FPC)
2273 – CPD - xxxx
In compliance with Council Directive 89/106/EEC of 21 December 1988 on the approximation of laws,
regulations and administrative provisions of the Member States relating to construction products
(the Construction Products Directive or CPD), as later amended,
it has been stated that the construction product:
Structural Components for Steel Structures
Harmonised Type / Execution Class of the Construction Product Declaration Method
EN 1090-1: 2009 Load bearing and welded structural steel components up
to EXC X according to EN 1090-2:2008
1, 2, 3a and 3b table A.1
of EN 1090-1:2009
placed on the market by
XXXXX
XXXXX
XXXXX
and produced in the factory(ies)
XXXXX
XXXXX
XXXXX
is submitted by the manufacturer to the initial type-testing of the product, a factory production control and to the
further testing of samples taken at the factory in accordance with a prescribed test plan and that the notified body
No. 2273 – Steel Construction Certification Scheme Ltd - has performed the initial inspection of the factory and of
the factory production control and performs the continuous surveillance, assessment and approval of the factory
production control.
Attestation
This certificate attests that all provisions concerning the attestation of factory
production control described in Annex ZA of the standard:
EN 1090-1: 2009 were applied.
Date of first issue
xxx
Date of next Surveillance
xxxx
Validity Period
This certificate remains valid as long as the conditions laid down in the
harmonised standard in reference or the manufacturing conditions in the
factory or the FPC itself are not modified significantly.
Chairman:
Scheme Manager:
SCCS is the natural partner for steelwork contractors and component manufacturersfollowing the route to CE Marking certification.
SCCS is a Notified Body able to assess and certify your Factory Production Control(FPC) system.
Implementation and maintenance of a suitable FPC system is a key requirement ofCE marking Certification. SCCS can undertake a gap analysis if you are preparing anFPC system, but do not feel ready for the certification audit.
If you already use SCCS services, the FPC assessment can be incorporated into otherscheduled visits to keep costs down.
Steel Construction Certification Scheme Limited4 Whitehall Court, Westminster, London SW1A 2ES Tel: +44 (0) 20 7747 8134 • Fax: +44 (0) 20 7747 8199email: sccs@steelconstruction.org • website: www.steelconstruction.org/sccs
Registered in England No. 2370407
SCCS is a subsidiary of BCSA Limited operating under the direction of an independent Certification Board.
o find out ore lease contact SCCS on
E ail sccs steelconstruction orgWebsite: www.steelconstruction.org/sccs
July 2017