Post on 08-Apr-2018
8/7/2019 Stazhevsky Turning Anchors Presentation
1/30
8/7/2019 Stazhevsky Turning Anchors Presentation
2/30
Where ground anchors are needed
8/7/2019 Stazhevsky Turning Anchors Presentation
3/30
Anchorage work conditions
Installation of anchors is often done inadverse conditions :
remote, out-of-the-way (difficult-to-access)and confined places, e.g., vertical walls or
high steep slopes; at low air temperature etc.
8/7/2019 Stazhevsky Turning Anchors Presentation
4/30
8/7/2019 Stazhevsky Turning Anchors Presentation
5/30
Requirements to ground anchors:
low number per area unit, high bearing capacity; simple design and high reliability;
low cost;
high installation productivity; no use of wet processes or self-consolidating
compounds in installation operations;
possibility of use of low-weight, maneuverable,
mobile devices, e.g., hand-held tools or portablemachines.
8/7/2019 Stazhevsky Turning Anchors Presentation
6/30
Dilatancy anchors
8/7/2019 Stazhevsky Turning Anchors Presentation
7/30
d
d
d+2d
F
Stressed-strained state of anchor lock
F
8/7/2019 Stazhevsky Turning Anchors Presentation
8/30
8/7/2019 Stazhevsky Turning Anchors Presentation
9/30
Design versions of turning anchor
with flexible pull element
8/7/2019 Stazhevsky Turning Anchors Presentation
10/30
8/7/2019 Stazhevsky Turning Anchors Presentation
11/30
8/7/2019 Stazhevsky Turning Anchors Presentation
12/30
8/7/2019 Stazhevsky Turning Anchors Presentation
13/30
8/7/2019 Stazhevsky Turning Anchors Presentation
14/30
u*
1
2
3
1
12
2
F F
4
a
b c
u*
1
2
3
1
12
2
F F
4
a
b c
) test bench;
) initial position of anchor plate;
) final position of anchor plate .
1 anchor plate,2 pull rope,
3 load gauge,
4 cavity
Laboratory tests
8/7/2019 Stazhevsky Turning Anchors Presentation
15/30
F
8/7/2019 Stazhevsky Turning Anchors Presentation
16/30
F
8/7/2019 Stazhevsky Turning Anchors Presentation
17/30
8/7/2019 Stazhevsky Turning Anchors Presentation
18/30
F
8/7/2019 Stazhevsky Turning Anchors Presentation
19/30
8/7/2019 Stazhevsky Turning Anchors Presentation
20/30
F
8/7/2019 Stazhevsky Turning Anchors Presentation
21/30
A
F
Anchor plate kinematics
with central fixation of pull rope
(s = 0)
Hole axis
Trajectory of point A
0
x
x
u
8/7/2019 Stazhevsky Turning Anchors Presentation
22/30
B
F
s 0
u
xA
x1
x2
Anchor plate kinematics with eccentric fixation of pull rope
(s > scr)
F pull out force; plate turn angle; x1 , x2 lateral drift of plate;
A anchor plate center; B rope fixation point;
s rope fixation point eccentricity.
Hole
axisTrajectory of point A
Hole axis
8/7/2019 Stazhevsky Turning Anchors Presentation
23/30
Turn anchor load and kinematic diagrams
obtained in laboratory tests
8/7/2019 Stazhevsky Turning Anchors Presentation
24/30
f
F
Increase in anchor bearing capacity at the expense of Euler forces
F = fek , where k friction factor
8/7/2019 Stazhevsky Turning Anchors Presentation
25/30
Automated anchor test equipment
Schematic diagram
General view
1 hydraulic jack with hollow push rod;
2 anchor pull rope; 3 rope grip;
4 auxiliary rope grip; 5 hydraulic pump
8/7/2019 Stazhevsky Turning Anchors Presentation
26/30
Field tests of anchors
Loading of anchor and registrationof its load diagram
Driving of anchor withhydraulic impact tool
8/7/2019 Stazhevsky Turning Anchors Presentation
27/30
Load diagrams of various types of anchors
Plate type anchor
27
T-shape anchor
Cylindrical anchor
20015010
s=0
20015010
s=0
130, l=260, s=0
Final position of anchor
8/7/2019 Stazhevsky Turning Anchors Presentation
28/30
Conclusion
Requirements to anchors formulated.
Dilatancy anchors with flexible pull rod and increasingpull resistance found to comply with the requirements.
Such anchors design and installation procedures
developed.
The anchors tested in laboratory and field conditions.
Operability and efficiency of the anchors confirmed by
the tests.
8/7/2019 Stazhevsky Turning Anchors Presentation
29/30
8/7/2019 Stazhevsky Turning Anchors Presentation
30/30