STANDARD FASCIA TABLE OF CONTENTS · 2019-01-17 · Fascia sheeting material, including face panel,...

STANDARD FASCIA TABLE OF CONTENTS

Standard Fascia Information, Specifications, and Dimensions .......................................3Standard Color Definition for Closed Fascias .................................................................4Standard Color Definition for Open Fascias....................................................................5

FS0010PE – Structural Spacer Connections ............................................................6FS0020PE – Sidewall Dimensions (Open Fascia) ....................................................7FS0030PE – Endwall Dimensions (Open Fascia) .....................................................8FS0040PE – Sidewall Dimensions (Closed Fascia)..................................................9FS0050PE – Endwall Dimensions (Closed Fascia).................................................10

Fascia Structural @ Bypass Girts .................................................................................11HA1010 – Intermediate Frames @ Low Eave .........................................................11HA1020 – Intermediate Frames @ Post & Beam Endwall (Rake) - Closed Fascia 12HA1025 – Intermediate Frames @ Post & Beam Endwall (Rake) - Open Fascia...13HA1030 – Intermediate Frames @ High Eave ........................................................14HA1050 – Horizontal Spacer Erector Note..............................................................15

Fascia Structural @ Inset Girts .....................................................................................16HB1010 – Intermediate Frames @ Low Eave .........................................................16HB1020 – Intermediate Frames @ Post & Beam Endwall (Rake) - Closed Fascia 17HB1025 – Intermediate Frames @ Post & Beam Endwall (Rake) - Open Fascia...18HB1030 – Intermediate Frames @ High Eave ........................................................19

Fascia Structural @ Flush Girts ....................................................................................20HC1010 – Intermediate Frames @ Low Eave.........................................................20HC1020 – Intermediate Frames @ Post & Beam Endwall (Rake) - Closed Fasica 21HC1025 – Intermediate Frames @ Post & Beam Endwall (Rake) - Open Fascia...22HC1030 – Intermediate Frames @ High Eave ........................................................23

Fascia Structural @ Post & Beam Endwall ...................................................................24HD1010 – End Frame @ High Eave .......................................................................24HD1020 – End Frame @ Low Eave ........................................................................25

Fascia Structural @ Corners.........................................................................................26HE1010 – Return To Main Building .........................................................................26HE1020 – Outside Corner .......................................................................................27HE1030 – Corner @ Sidewall Elevation..................................................................28HE1040 – Inside Corner Detail @ SW ....................................................................29HE1050 – Inside Corner Detail @ EW ....................................................................30

Fascia Structural @ Secondary Members ....................................................................31

HF1010 – Intermediate Girts ...................................................................................31HF1020 – Sag Cable ( 20’-0” Bays) ......................................................................32HF1030 – Sag Cable ( 20’-0” Bays) ......................................................................33HF1060 – Sag Cable @ Corner ..............................................................................34

Fascia Sheeting @ Classic Roof (Closed Fascia) ........................................................35HG1010 – Sidewall Fascia sheeting w/ Eave Strut .................................................35HG1030 – Sidewall Extended Fascia sheeting w/ (2) Eave Struts..........................36HG1050 – Endwall Fascia sheeting ........................................................................37HG1060 – High Eave Fascia sheeting ....................................................................38

Fascia Sheeting @ Classic Roof (Open Fascia)...........................................................39HH1020 – Sidewall Fascia sheeting w/ Gutter ........................................................39HH1040 – Endwall Fascia sheeting.........................................................................40HH1050 – High Eave Fascia sheeting.....................................................................41

Fascia Sheeting @ CFR Roof (Closed Fascia).............................................................42HI6020 – Sidewall Fascia sheeting w/ Eave Strut ...................................................42HI6040 – Sidewall Extended Fascia sheeting w/ (2) Eave Struts............................43HI6060 – Endwall Fascia sheeting ..........................................................................44HI6070 – High Eave Fascia sheeting ......................................................................45

Fascia Sheeting @ CFR Roof (Open Fascia) ...............................................................46HJ6020 – Sidewall Fascia sheeting w/ Gutter .........................................................46HJ6040 – High Eave Fascia sheeting .....................................................................47HJ6050 – Endwall Fascia sheeting .........................................................................48

Fascia Trim ...................................................................................................................49HK1020 – Outside Corner w/ “Accent Panel” Face Panel.......................................49HK1050 – Fascia Termination @ Existing w/ “Accent Panel” Face Panel ..............50HK1090 – Fascia Termination Above Roof w/ “Accent Panel” Face Panel.............51HK1120 – Fascia Termination Below Roof w/ “Accent Panel” Face Panel .............52HK1140 – Soffit Corner Trim ...................................................................................53HK1150 – Fascia Cap Trim @ Corner.....................................................................54HK1170 – Fascia Termination @ Soffit w/ Channel Return ....................................55HK1180 – Parapet Gutter Interior Splice .................................................................56

LAST REVISIONDATE: 03/11/15BY: AAJ CHK: MDK

STANDARD FASCIA INFORMATION, SPECIFICATIONS, AND DIMENSIONS

1. Fascias may be open or closed soffit with a closed with soffit being the standardcondition.

2. Fascias MUST terminate at a sidewall or endwall column.3. Fascia sheeting material, including face panel, back panel, and soffit panel is

available in either Nucor Classic Wall™, Nucor Reverse Classic Wall™, NucorAccent Wall™, when supplied by Nucor Building Systems. Fascia sheeting mayalso be specified as supplied by others or not by Nucor Building Systems. Inthese cases, the weight of the sheeting and any specified deflection criteria mustbe supplied to Nucor Building Systems with the quote request and orderdocuments. Contact the engineering team for assistance.

4. Fascia standard location is at/near the Eave height of a building.5. With a Nucor CFR™ standing seam roof, a minimum of 18” is required above the

highest portion of the roof structural to the top of a closed fascia to provide spacefor proper flashing. With a Nucor Classic Roof™, a minimum of 10” is required forthis condition.

6. The fascia clear dimension is taken from finish floor to bottom of the fasciastructural.

Additional information Nucor standard fascias is available at the Nucor Building Systems website at the below link.

Standard Nucor Fascia

The following pages provide standard details for projects with fascias.

LAST REVISIONDATE: 01/27/03BY: CDM CHK: RJF

DETAIL NAME IF APPLICABLEFS0002PE.DWG 7.3.4

STANDARD COLOR DEFINITION FOR CLOSED FASCIAS

STANDARD COLOR DEFINITION FOR OPEN FASCIAS

FS0010PE – STRUCTURAL SPACER CONNECTIONS

LAST REVISIONDATE: 02/16/15BY: AK CHK: EGB

FS0020PE – SIDEWALL DIMENSIONS (OPEN FASCIA)

™™

FS0030PE – ENDWALL DIMENSIONS (OPEN FASCIA)

™™

FS0040PE – SIDEWALL DIMENSIONS (CLOSED FASCIA)

™™

FS0050PE – ENDWALL DIMENSIONS (CLOSED FASCIA)

™™

DETAIL NAME IF APPLICABLEHA1010.DWG 7.3.11

FASCIA STRUCTURAL @ BYPASS GIRTS

HA1010 – INTERMEDIATE FRAMES @ LOW EAVE

HA1020 – INTERMEDIATE FRAMES @ POST & BEAM ENDWALL (RAKE) - CLOSED FASCIA

HA1025 – INTERMEDIATE FRAMES @ POST & BEAM ENDWALL (RAKE) - OPEN FASCIA

HA1030 – INTERMEDIATE FRAMES @ HIGH EAVE

HA1050 – HORIZONTAL SPACER ERECTOR NOTE

DETAIL NAME IF APPLICABLEHB1010.DWG 7.3.16

FASCIA STRUCTURAL @ INSET GIRTS

HB1010 – INTERMEDIATE FRAMES @ LOW EAVE

HB1020 – INTERMEDIATE FRAMES @ POST & BEAM ENDWALL (RAKE) - CLOSED FASCIA

HB1025 – INTERMEDIATE FRAMES @ POST & BEAM ENDWALL (RAKE) - OPEN FASCIA

HB1030 – INTERMEDIATE FRAMES @ HIGH EAVE

DETAIL NAME IF APPLICABLEHC1010.DWG 7.3.20

FASCIA STRUCTURAL @ FLUSH GIRTS

HC1010 – INTERMEDIATE FRAMES @ LOW EAVE

HC1020 – INTERMEDIATE FRAMES @ POST & BEAM ENDWALL (RAKE) - CLOSED FASICA

HC1025 – INTERMEDIATE FRAMES @ POST & BEAM ENDWALL (RAKE) - OPEN FASCIA

HC1030 – INTERMEDIATE FRAMES @ HIGH EAVE

DETAIL NAME IF APPLICABLEHD1010.DWG 7.3.24

FASCIA STRUCTURAL @ POST & BEAM ENDWALL

HD1010 – END FRAME @ HIGH EAVE

DETAIL NAME IF APPLICABLEHD1020.DWG 7.3.25

HD1020 – END FRAME @ LOW EAVE

DETAIL NAME IF APPLICABLEHE1010.DWG 7.3.26

FASCIA STRUCTURAL @ CORNERS

HE1010 – RETURN TO MAIN BUILDING

HE1020 – OUTSIDE CORNER

HE1030 – CORNER @ SIDEWALL ELEVATION

HE1040 – INSIDE CORNER DETAIL @ SW

HE1050 – INSIDE CORNER DETAIL @ EW

DETAIL NAME IF APPLICABLEHF1010.DWG 7.3.31

FASCIA STRUCTURAL @ SECONDARY MEMBERS

HF1010 – INTERMEDIATE GIRTS

HF1020 – SAG CABLE ( 20’-0” BAYS)

HF1030 – SAG CABLE ( 20’-0” BAYS)

HF1060 – SAG CABLE @ CORNER

DETAIL NAME IF APPLICABLEHG1010.DWG 7.3.35

FASCIA SHEETING @ CLASSIC ROOF (CLOSED FASCIA)

HG1010 – SIDEWALL FASCIA SHEETING W/ EAVE STRUT

HG1030 – SIDEWALL EXTENDED FASCIA SHEETING W/ (2) EAVE STRUTS

HG1050 – ENDWALL FASCIA SHEETING

HG1060 – HIGH EAVE FASCIA SHEETING

DETAIL NAME IF APPLICABLEHH1020.DWG 7.3.39

FASCIA SHEETING @ CLASSIC ROOF (OPEN FASCIA)

HH1020 – SIDEWALL FASCIA SHEETING W/ GUTTER

HH1040 – ENDWALL FASCIA SHEETING

HH1050 – HIGH EAVE FASCIA SHEETING

DETAIL NAME IF APPLICABLEHI6020.DWG 7.3.42

FASCIA SHEETING @ CFR ROOF (CLOSED FASCIA)

HI6020 – SIDEWALL FASCIA SHEETING W/ EAVE STRUT

DETAIL NAME IF APPLICABLEHI6040.DWG 7.3.43

HI6040 – SIDEWALL EXTENDED FASCIA SHEETING W/ (2) EAVE STRUTS

LAST REVISION DATE: 12/29/17 BY: EGB CHK: SDF

DETAIL NAME IF APPLICABLE

HI6060.DWG 7.3.44

HI6060 – ENDWALL FASCIA SHEETING

HI6070.DWG 7.3.45

HI6070 – HIGH EAVE FASCIA SHEETING

HJ6020.DWG 7.3.46

FASCIA SHEETING @ CFR ROOF (OPEN FASCIA)

HJ6020 – SIDEWALL FASCIA SHEETING W/ GUTTER

HJ6040.DWG 7.3.47

HJ6040 – HIGH EAVE FASCIA SHEETING

HJ6050.DWG 7.3.48

HJ6050 – ENDWALL FASCIA SHEETING

DETAIL NAME IF APPLICABLEHK1020.DWG 7.3.49

FASCIA TRIM

HK1020 – OUTSIDE CORNER W/ “ACCENT PANEL” FACE PANEL

HK1050 – FASCIA TERMINATION @ EXISTING W/ “ACCENT PANEL” FACE PANEL

HK1090 – FASCIA TERMINATION ABOVE ROOF W/ “ACCENT PANEL” FACE PANEL

HK1120 – FASCIA TERMINATION BELOW ROOF W/ “ACCENT PANEL” FACE PANEL

HK1140 – SOFFIT CORNER TRIM

HK1150 – FASCIA CAP TRIM @ CORNER

HK1170 – FASCIA TERMINATION @ SOFFIT W/ CHANNEL RETURN

HK1180 – PARAPET GUTTER INTERIOR SPLICE

STANDARD FASCIA TABLE OF CONTENTS · 2019-01-17 · Fascia sheeting material, including face panel,...

Documents

Transcript of STANDARD FASCIA TABLE OF CONTENTS · 2019-01-17 · Fascia sheeting material, including face panel,...

ALUMINIUM FASCIAS & ALUMINIUM SOFFITS - Guttercrest · 4 Aluminium Fascias & So˜ts Tapered Arrowhead So˜t Planks, 1.5m Diameter Centre Circle Panel, Pro˚led Fascia. Bullnose Fascia

R-SERIES FASCIA - 3&4 inch Chain Control · 3” FASCIA 4” FASCIA CONFIGURATION NOTCH DIMENSIONS FASCIA DEDUCTIONS x y With Bracket Covers Without Bracket Covers 3” FASCIA PANEL

Nucor Corporation

21mm AND BUMPER FASCIA UNDERBODY PANEL TEMPORARILY … · jaguar f-pace 9/16/2016 13291 120 scan for more information-temporary removal of bumper fascia and underbody panel-trim underbody

Nucor VR16 IITM - Nucor Building Systems · Nucor Vise Lock® Seam Nucor Vise Lock 360® Seam Standard Optional Product Specifications & Details. 1. Panels are checked for bending

G15: Overview of the Neck - anatomy.med.utah.edu Morton B.ppt.pdf · cervical fascia Platysma m. Deep fascia. Investing fascia. Investing fascia. Pretracheal fascia. Pretracheal fascia

Case NuCor Fulltext

UrbanShade SystemCaptured Fascia Jamb Mount Continuous Fascia Captured fascia wall surface Jamb-continuous fascia UrbanShade System fascia and specifications Fascia colors: Square

Crown Victoria and Town Car Fascia Panel Removal … There are several reasons you may need to remove the instrument fascia panel – to replace the main light switch illuminating

Design Manual Fascia, suspended Tray Panels - Vertical Panel … · 2016-11-14 · 1.1A Standard tray panel 1.1B Reinforced tray panel ... Rivetable thickness = total material thickness

Nucor (MCS)

NUCOR BUILDING SYSTEMS - ML BarnardNUCOR BUILDING SYSTEMS Nucor Building Systems is a division of Nucor Corporation, a Fortune 500 company, producing steel and steel products. Nucor

Datasheet IEC Miniature Thermocouple Connector Panel Fascia … · 2019-10-13 · ENGLISH Datasheet IEC Miniature Thermocouple Connector Panel Fascia Sockets Types K, J, T, E, N,

239744610 nucor-case

The In-House Legal Perspective on International Trade Issues · Nucor Corporation • I am General Manager of Legal Affairs for Nucor orporation (“Nucor”) • Nucor is the largest

Cequent Scan for safe Installation Instructions towing tip ... · bumper beam. 3d. Remove fascia - using a plastic trim panel tool, gently remove the plastic fascia starting at the

Nucor 1+Pest

Nucor - Yamato (Shapes)

· nucor building systems is a nucor company nucor “cfr”™ system - foundation of performance Nucor Corporation is a Fortune 500 company, producing steel and steel products

Deep cervical fascia (fascia colli)