Standard Engineering Details & Drawings

Standard Engineering

Details & Drawings

Copyright HercuTech Inc. 12/01/2010 • Patents & Patent Pending • 855.284.4037 • www.HercuTech.com

Issue Date: 11/08/2017

CONFIDENTIALITY and LIABILITY STATEMENT

This publication contains information and data that is not yet available to the public or the general building community at large as it is both preliminary and confidential. We are offering this information to you in order to facilitate your understanding of the advanced HercuWall® construction systems for the purpose of evaluating it for your use. The documents, drawings and construction details contained herein have been prepared by the management of HercuTech Inc. or their Structural Engineers and is being delivered to a select number of parties. The information has been prepared with the utmost care however the Company does not warrant its accuracy for any particular or specific application. The sole purpose of this information is to assist the recipient in deciding the applicability of HercuWall® to recipient’s purpose. BY ACCEPTING THIS DOCUMENT, THE RECIPIENT AGREES AND ACKNOWLEDGES THAT ALL OF THE INFORMATION HEREIN, AND ALL OTHER INFORMATION MADE AVAILABLE TO THE RECIPIENT IN CONNECTION WITH ANY FURTHER STUDY, IS DEEMED TO BE PROPRIETARY AND CONFIDENTIAL INFORMATION OF THE COMPANY AND THAT NONE OF THE INFORMATION SHALL BE USED BY THE RECIPIENT, ITS EMPLOYEES OR REPRESENTATIVES IN ANY MANNER OTHER THAN IN CONNECTION WITH ITS EVALUATION OF THE COMPANY’S PRODUCTS OR TECHNOLOGY FOR THE PURPOSE OF CONSIDERING THEIR USE OR APPLICABILITY. THE COMPANY’S PRODUCTS DESCRIBED HEREIN ARE MANUFACTURED ON EXISTING US AND FOREIGN PATENTS ISSUED AND PENDING. The Company reserves the right to require the return of this document and its collateral information at any time. This document shall remain confidential until such time as the information is made available to the general public or the construction trades at large through the company’s website or by printed copy. This document is fluid and is subject to change or revision, all or in part, without notice. Should you require further technical assistance please contact:

5640 S. 40th St, Suite 5 • Phoenix, AZ 85040

SCALE: N/A

PROJECT: N/A

Copyright HercuTech Inc.

12/01/2010

DATE OF DRAWING:

11/07/2017UNITS: INCHES

TYPICAL HERCUWALL SECTION

General Notes:

• Typical Interior HercuWall with window and electrical, cutouts to show detail.

HercuWall

Standard Details3D-1

info@HercuTech.com • www.HercuTech.com

1-855-284-4037 • 480-284-4535SHEET 01 OF 08U.S. & INTERNATIONAL PATENTS

& PATENTS PENDING

SCALE: N/ACopyright HercuTech Inc.

12/01/2010

UNITS: INCHES

- BOND BEAM

General Notes:

• 2 #4 rebar in the bond beam placed in hooks pre-installed into ShearStrips at correct dimensions.

• No ties required to hooks, standard lap required where rebar joins.

DATE OF DRAWING:

11/07/2017

HercuWall

Standard Details

PROJECT: N/A

& PATENTS PENDING

12/01/2010

UNITS: INCHES

General Notes:

• ShearStrips® have a standard 7/8 inch hole every 3 inches for electrical.

• To install electrical connections or junction boxes remove foam needed from outer 2.5 inch wall.

• Electrical boxes can be fastened to ShearStrips® or can be fastened to concrete studs.

• Nylon grommets are recommended to be used.

• DO NOT cut through ShearStrips®.

DATE OF DRAWING:

11/07/2017

HercuWall

Standard Details

PROJECT: N/A

& PATENTS PENDING

12/01/2010

UNITS: INCHES

General Notes:

• 3 inch min. rebar studs will be in footer.

• 9 inch track runs perimeter of wall for installing HercuWall.

• Track is also used to fasten interior and exterior finish.

• See detail 009.

DATE OF DRAWING:

11/07/2017

HercuWall

Standard Details

PROJECT: N/A

& PATENTS PENDING

12/01/2010

UNITS: INCHES

General Notes:

• Anchor bolts are embedded in bond beam and used to fasten top plate.

• See detail 010.

DATE OF DRAWING:

11/07/2017

HercuWall

Standard Details

PROJECT: N/A

& PATENTS PENDING

12/01/2010

UNITS: INCHES

General Notes:

• Window fastens to concrete surrounding studs.

• Interior finish wraps HercuWall to face of window.

• See detail 012.

DATE OF DRAWING:

11/07/2017

HercuWall

Standard Details

PROJECT: N/A

& PATENTS PENDING

12/01/2010

UNITS: INCHES

General Notes:

• Shows concrete studs with no foam or ShearStrips®.

• 4x4 concrete stud placement adjustable up to 12" O.C. spacing

• See detail 004.

DATE OF DRAWING:

11/07/2017

HercuWall

Standard Details

PROJECT: N/A

& PATENTS PENDING

12/01/2010

UNITS: INCHES

General Notes:

• Shows standard truss connection.

• See detail 010.

DATE OF DRAWING:

11/07/2017

HercuWall

Standard Details

PROJECT: N/A

& PATENTS PENDING

SCALE: 3/4" = 12"

Typical HercuWall Section

1720 W. 10th St, Ste. 101 • Tempe, AZ 85281

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

SHEET 01 OF ##U.S. & INTERNATIONAL PATENTS

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDINGSCALE: 1/2" = 12"

Typical HercuWall Elevation

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

Window Opening at HercuWall

Dropped LintelDATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

Flush Lintel

DATE OF DRAWING:

11/07/2017

SCALE: 1/2" = 12"

Dropped Lintel

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

Door Opening at HercuWall

Dropped Lintel

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

Flush Lintel - ALT.DATE OF DRAWING:

11/07/2017

SCALE: 1/2" = 12"

Dropped Lintel

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

SCALE: 1/2" = 12"

Typical HercuWall Solid Concrete

Shear Wall

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

Typical HercuWall at Slab

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

Typical Top of HercuWall

with Strap

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Typical HercuWall Jamb Stud

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

Typical HercuWall Window Sill

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

Typical HercuWall Window

Header with Hercutrim

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

Typical HercuWall to

HercuWall

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Typical Slab Edge at Exterior

HercuWall

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Slab Edge at Exterior HercuWall

with Curb

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

Interior HercuWall Slab

Elevation Change

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Typical Holdown at HercuWall

Shear Wall

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

Exterior HercuWall at Slab

Elevation Change

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Exterior Finish Termination at

Bottom Exterior HercuWall

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDINGSCALE: 1 1/2" = 12"

Typical Top of HercuWall with

Truss StrapDATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Typical Floor Truss on

HercuWall - Parallel Truss Strap

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Typical Top of HercuWall with

Truss Saddle

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Typical Top of HercuWall

Hurricane Strap

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

Wood Beam at HercuWall

Bond Beam - AB

SCALE: 3/4" = 12"

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

Bond Beam - C

SCALE: 3/4" = 12"

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

Bond Beam - D

SCALE: 3/4" = 12"

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Hambro Joist at Exterior Wall

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Hambro Joist at Interior Bearing

HercuWall

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

SCALE: 3/4" = 12"

Hambro Joist Parallel to Exterior

1-855-284-4037 • 480-284-4535

PROJECT: N/A

12/01/2010

UNITS: INCHES

HercuWall

Standard Details

& PATENTS PENDING

DATE OF DRAWING:

11/07/2017

Standard Engineering Details & Drawings

Documents

Transcript of Standard Engineering Details & Drawings

Systems Standard Drawings

SCHEMATIC DRAWINGS STANDARD CONSTRUCTION JOINT DETAILS

STANDARD DRAWINGS - ACWD

INDOT Standards Committee Meeting - Indiana...details. The drawings included herein are therefore in the RPD format. All changes proposed to the standard drawings and comments from

GENERAL DETAILS 5.0 - CAD DRAWINGS - LOGIX ICF Details... · cad drawings rev ® general details. cad drawings ...

Guide to Bridge Standard Drawings - August 17 · PDF fileGuide to Bridge Standard Drawings 2TxDOT 08/2017 ... working for the Texas Department of Transportation ... modified details

KENTUCKY STANDARD DRAWINGS - Home | KYTC Drawing... · STANDARD DRAWINGS KENTUCKY STANDARD DRAWINGS ROADWAY ... and dimensions as shown on these drawings and to AASHTO Standard Specifications

STANDARD DRAWINGS FOR ROAD & DRAINAGE ......2 of 3 STANDARD DRAWINGS FOR ROAD & DRAINAGE INFRASTRUCTURE INDEX PAVEMENT DETAILS SD 02 Road Characteristics and Pavement Composition –

STANDARD DRAWINGS Application of Standard Drawings ...

Standard Support Drawings

T:\Reference\Standard Drawings\CRWWD\Standard Drawings ...

Drawings Standard Specifications 1

Engineering Design Criteria & Standard Drawings Drawings.pdf · Engineering Design Criteria & Standard Drawings APPENDIX A – STANDARD DRAWINGS FOREWORD The Standard Drawings presented

Network Rail Standards - ihsti.com · Network Rail Standards including: Standard Engineering Drawings Civil Engineering Standard Designs and Details -SDD user guide an introduction

GENERAL DRAWINGS CURRENT STANDARD DRAWIN… · INDEX OF STANDARD DRAWINGS Page 1 of 2 DRAWINGS GENERAL DRAWINGS G1.....Underground Utility Location Standards G2.....Gravel Road Standard

19.0 STANDARD DRAWINGS

STANDARD DRAWINGS - ROADING

STANDARD DRAWINGS WATER STANDARD DRAWINGS Title …

PNG Roads Standard Drawings

GEOTECHNICAL STANDARD DRAWINGS