Post on 16-Aug-2020
ST. XAVIER’S SCHOOLS –CHANDIGARH, PANCHKULA, MOHALI, ZIRAKPUR
Class 10 English Worksheet -2
Dear Students, go to the following link of you tube for the story THE OLD MAN AT THE
BRIDGE
https://youtu.be/ODVSATro4Z8
And answer the following questions:
Q1 Where was the old man sitting? Describe him.
Q2 What kind of bridge is mentioned in the story?Who all were crossing the bridge?
Q3 What was the narrator's business?
Q4 Why does the old man sit there without moving?
Q5 Why is the speaker worried about the old man sitting there?
Q6 Where had the old man come from? Why?
Q7What animals did he own?What had he done with them?
Q8 What advice does the narrator give to the old man?
Q9 Why is the old man worried?
Q10 Why does'nt the old man cross the bridge and escape to a safer place?
Q11 Mention any two incidents in the story that show the consequences of a war.
Q 12 How does the narrator try to relieve the old man of his worries?
Q13 What happened to the old man at the end of the story?
Q14 What is " all the good luck that old man could ever have" ?
Q15 Which war has been mentioned in the story?
ANSWER KEY ENGLISH LANGUAGE CLASS X
WORKSHEET 1
Exercise 1.
1.of 2.to 3.at 4.for
5.against 6.in 7.off 8.over
9.to 10.with 11.of 12.into
13.amongst 14.on 15.from 16.with
17.of 18.till 19.of 20.for
Exercise 2.
1.in favour of 2.along with 3.In case of 4.according to
5.in front of 6.Instead of 7.because of 8.Inspite of
9.In order to 10.in place of
Exercise 3.
1.on 2.of 3.to 4.to
5.of 6.of 7.on 8.to
9.with 10.from 11.to 12.across
13.to 14.of 15.against 16.in
17.in 18.over 19.beside 20.in
Class 10 Hindi Worksheet -2
Class 10 Punjabi Worksheet-2
ਪ੍ਰਸ਼ਨ 1-ਹਠ ਦਦਿੱਤ ਮੁਹਾਵਦਿਆ ਂਦ ਵਾਕ ਦਿਖ। ੧ ਉੱਚਾ ਨੀਵਾ ਬਿਣਾ।
੨ ਅਿੱਖ ਬਚਾਉਣਾ।
੩ ਅਿੱਗ ਿਾਉਣਾ।
੪ ਈਦ ਦਾ ਚੰਦ ਹਣਾ।
੫ ਸਬਕ ਦਸਖਾਉਣਾ।
੬ ਸਿਰ ਉੱਤੋਂ ਪਾਣੀ ਲੰਘਣਾ
੭ ਦਸਿ ਮਿੱਥ ਮੰਨਣਾ।
ਪ੍ਰਸ਼ਨ 2 -ਬਹੁਤ ਸ਼ਬਦਾ ਂਦੀ ਥਾਂ ਇਿੱਕ ਸ਼ਬਦ ਦਿਖ ।
੧ ਸਭ ਦ ਮਨਾ ਂਨੰੂ ਦਿਆਿਾ ਿਗਣ ਵਾਿਾ।
੨ ਦਕਸ ਉੱਚ ਆਦਿਸ਼ ਿਈ ਆਿਣੀ ਜਾਨ ਕੁਿਬਾਨ ਕਿਨਾ।
੩ ਉਹ ਥਾ ਂਦਜਥ ਿਦਹਿਵਾਨ ਘਿ ਕਿਦ ਹਨ।
੪ ਉਹ ਿਾਠ ਜ ਅਿੰਭ ਤੋਂ ਿ ਕ ਅੰਤ ਤਿੱਕ ਿਗਾਤਾਿ ਹਵ
੫ ਦਜਸ ਨੰੂ ਿਿੱਬ ਦੀ ਹੋਂਦ ਤ ਭਿਸਾ ਹਵ।
੬ ਹੀਿ ਜਵਾਹਿਾਤ ਦੀ ਿਿਖ ਕਿਨ ਵਾਿਾ।
੭ ਦਜਹੜਾ ਕੰਮ ਤੋਂ ਜੀ ਚੁਿਾਵ।
ਪ੍ਰਸ਼ਨ 3- ਹਠ ਦਿਖ ਵਾਕਾ ਂਨੰੂ ਦਿੰਗ ,ਵਚਨ, ਕਾਿ ਅਨੁਸਾਿ ਬਦਿ।
੧ ਕੁੜੀ ਕਦਵਤਾ ਿੜ ਿਹੀ ਹ। (ਵਚਨ ਬਦਿ)।
੨ ਮਿੱਝ, ਗਾਂ ਤ ਬਿੱਕਿੀ ਖਤ ਦਵਚ ਘਾਹ ਚਿ ਿਹੀਆ ਂਸਨ(ਵਚਨ ਬਦਿ)।
੩ ਦਚੜੀਆਘਿ ਦਵਿੱਚ ਬਾਂਦਿ, ਦਹਿਨ, ਸ਼ਿ, ਹਾਥੀ ਅਤ ਮਿ ਸਨ(ਦਿੰਗ ਬਦਿ)।
੪ ਮੇਰਾ ਭਰਾ ਆਪਣ ੇਦੋਿਤ ਨਾਲ ਮੇਲਾ ਵੇਖਣ ਸਗਆ (ਸਲੰਗ ਬਦਲੋ)
੫ ਮਾਲੀ ਬੂਸਿਆਂ ਨੰੂ ਪਾਣੀ ਦੇ ਸਰਹਾ ਿੀ (ਭਸਵਖੱਤ ਕਾਲ) ੬ ਿੜਕ ਤੇ ਬੱਿਾਂ, ਕਾਰਾਂ ,ਗੱਡੀਆਂ ਅਤੇ ਿਕੂਿਰ ਜਾਣਗੇ (ਭੂਤ ਕਾਲ) ੭ ਮੈਂ ਸਕਤਾਬ ਪੜਹ ਸਰਹਾ ਿੀ (ਵਰਤਮਾਨ ਕਾਲ)
CLASS 10 MATHS WORKSHEET- 2
Other methods of finding Mean of Grouped Data
1) Short Cut Method or Assumed Mean Method
Under this method, larger quantities get converted into smaller ones, making the
process of multiplication and division easier. When the product fi xi involves
larger numbers, we use this method and proceed stepwise as under.
Step 1: Choose a suitable value of xi in the middle as the assumed mean and call
it A.
*If two values come in the middle, we can choose any one of them as assumed
mean.
Step 2: Calculate the deviation di = (xi –A) for each xi.
Step 3: Calculate the product fidi.
Step 4: Find ∑ fidi . and ∑ fi
Step 5: Calculate the mean using the formula: Mean= A + ∑ 𝐟𝐢𝐝𝐢
∑𝐟𝐢
Example 1: Using short cut method, find the mean from the following data.
Variate ( xi.) 18 19 20 21 22 23 24
Frequency
(fi )
184 212 327 376 614 372 415
Solution: Let the assumed mean be A= 21
Variate ( xi.) Frequency (fi ) di = (xi –A) fidi.
18 184 -3 -552
19 212 -2 -424
20 327 -1 -327
21=A 376 0 0
22 614 1 614
23 372 2 744
24 415 3 1245
∑ fi= 2500
∑ fidi.= 1300
Therefore, Mean= A + ∑ fidi
∑fi = 21+
1300
2500 = 21 + 0.52 = 21.52
2) Step- Deviation Method
When the values of xi and fi are large and the values of xi are equally spaced ,we
use the step- deviation method as described below:
Step 1: Choose a suitable value of xi in the middle as the assumed mean and call
it A.
Step 2: Calculate c = ( x2 - x1)
Step 3: Calculate ui = (𝑥i –A)
c
Step 4: Calculate fi ui. and hence find ∑ fi ui..
Step 5: Calculate the mean using the formula: A + ( ∑ 𝐟𝐢𝐮𝐢
∑𝐟𝐢X c)
Note: When the data is in the form of class intervals, then we find the class mark
xi for each class by using the relation xi =
lower limit + upper limit
2
Example 2: Using Step- Deviation Method, calculate the mean for the following
data.
Height(in
cm)
135-
140
140-
145
145-
150
150-
155
155-
160
160-
165
165-
170
170-
175
No. of
boys
4 9 18 28 24 10 5 2
Solution: Here class-size c= 140-135 = 5. Take assumed mean, A = 152.5
Class- interval Class-mark
( xi)
Frequency
(fi) ui =
(𝑥i –A)
c
fi ui.
135-140 137.5 4 -3 -12
140-145 142.5 9 -2 -18
145-150 147.5 18 -1 -18
150-155 152.5 28 0 0
155-160 157.5 24 1 24
160-165 162.5 10 2 20
165-170 167.5 5 3 15
170-175 172.5 2 4 8
∑ fi = 100 ∑ fi ui..=19
Mean = A + ( ∑ fiui
∑fiX c) = 152.5+ (
19
100 x 5) = 152.5 + 0.95 = 153.45
Note: When the given class-intervals are in inclusive form, we first convert them
into exclusive form as described below.
Step 1: We find the adjustment factor by the formula :
Adjustment factor = Lower limit of one class −Upper limit of previous class
2
Step 2: We subtract the adjustment factor from each lower limit and add it to each
upper limit to get the true class limits i.e. classes after adjustment.
Example 3: Calculate the mean of the following frequency distribution using the
Short Cut Method.
Marks 11-20 21-30 31-40 41-50 51-60 61-70 71-80
No. of
students
2 6 10 12 9 7 4
Give your answer to the nearest whole number.
Solution: The given class-intervals are in inclusive form. So,we convert them
into exclusive form. Adjustment factor = 21−20
2 =
1
2 = 0.5
Mean = A + ∑ fidi
∑fi = 45.5 +
70
50 = 45.5 + 1.4 = 46.9 = 47 ( to the nearest whole
number)
Note : When the data is in the form of a Cumulative Frequency Table, then we
first construct a frequency table from it and then find the mean, as illustrated in the
example given below.
Marks Class-mark (xi ) No. of students (fi
)
di = (xi –A) fi di
10.5-20.5 15.5 2 -30 -60
20.5-30.5 25.5 6 -20 -120
30.5-40.5 35.5 10 -10 -100
40.5-50.5 45.5 = A 12 0 0
50.5-60.5 55.5 9 10 90
60.5-70.5 65.5 7 20 140
70.5-80.5 75.5 4 30 120
∑ fi = 50 ∑ fidi.= 70
Example 4 : The following table gives the life- time ( in days ) of 100 electric
bulbs of a certain make.
Life-time
( in days)
Less than
50
Less than
100
Less than
150
Less than
200
Less than
250
Less than
300
No. of
bulbs
7 21 52 79 91 100
From this table, construct the frequency distribution table and hence f ind the
mean life-time of these bulbs.
Solution : We may prepare the table as under:
Class-interval Class-mark (xi
)
Cumulative
Frequency
Frequency (fi ) ui = (𝑥i –A)
c
fi ui.
0-50 25 7 7 -2 -14
50-100 75 21 21- 7 = 14 -1 -14
100-150 125= A 52 52-21 = 31 0 0
150-200 175 79 79-52 = 27 1 27
200-250 225 91 91-79 = 12 2 24
250-300 275 100 100- 91= 9 3 27
∑ fi = 100 ∑ fi ui..=50
Mean = A + ( ∑ fiui
∑fiX c) = 125 + (
50
100 x 50) = 125 + 25 = 150
Unsolved Problems
1) Using Short Cut Method, compute the mean height from the following
frequency distribution.
Height( in
cm)
58 60 62 65 66 68
No. of
plants
15 14 20 18 8 5
2) Find the mean of the following frequency distribution using Short Cut Method.
Class-
interval
0-50 50-100 100-150 150-200 200-250 250-300
Frequency 4 8 16 13 6 3
3) Using Step Deviation Method, calculate the mean of the following frequency
distribution.
Class-
interval
10-15 15-20 20-25 25-30 30-35 35-40
Frequency 5 6 8 12 5 9
4) Weights of 60 eggs were recorded as given below.
Weights (in
gms)
75-79 80-84 85-89 90-94 95-99 100-
104
105-
109
No. of eggs 4 9 13 17 12 3 2
Calculate their mean weight to the nearest gram.
5) The following table gives marks scored by students in an examination:
Marks Less
than 5
Less
than
10
Less
than
15
Less
than
20
Less
than
25
Less
than
30
Less
than
35
Less
than
40
Number
of
students
3
10
25
49
65
73
78
80
Calculate the mean marks correct to 2 decimal places.
Answer Key of Worksheet 1 Exercise 1
(i) 5.6 (ii) 9 (iii) 7
x = 6
54 kg
26
Exercise 2
14.5 years
f = 16
p = 8 and q = 6
CLASS 10 ECONOMICS WORKSHEET -1
Chapter -1 : FACTORS OF PRODUCTION
Productive Mechanism- it is a system which determines the production of various goods
and services in the economy.
Material goods- are those goods which can be seen or touched and have their definite
shape and size. For eg. Table, fan, etc.
Non - material goods - are those goods which cannot be seen or touched and do not have
a definite shape and size . For eg. Teaching, etc.
Production- is an activity that creates economic utility in goods and services .
Or
Production refers to any activity that results in the creation of goods and services
intended for exchange.
Factors of Production- production of a commodity or service requires so many things
like factor inputs and non - factor inputs . These are called factors of production. These
factors of production can be broadly classified into four categories -
1. Land
2. Labour
3. Capital
4. Entrepreneur
Characteristics of Factors of Production. They are as follows-
1. Jointly Used in Production of a Commodity- we will have to combine all factors of
production together to produce anything. For eg. Labour cannot produce anything
without the use of capital .
2. Variable Factor Proportion- any particular commodity can be produced by using
different techniques, which differ from each other in terms of quantity. For eg. Cotton
cloth can be produced by handlooms , which use a large number of labour and few simple
machines or by using a large number of automated machines and only a few workers .
3. Physical Existence- all the factors of production are tangible in nature that you can see
and touch .
4. Use of Factor Services - we can use the services of the factor not the factor itself in
the production process . For eg. A labourer helps in production by using his skill and
knowledge not himself.
5. All Factors of Production are not equally Mobile - labour and entrepreneur are
mobile as they can be transferred from one place to another whereas land is immobile .
Factor Inputs Non- factor Inputs
1. These are also known as primary
inputs . These include land , labour,
capital and entrepreneur.
1. These inputs are also known as
secondary inputs . These include raw
material, semi- finished goods etc.
2. These inputs do not lose their
identity when used in the
production process.
2. These inputs lose their identity
when used in the production process.
Class 10 Physics Worksheet-2
Uniform Circular Motion
When a body moves with a constant speed in a circular path, its motion is known as
uniform circular motion. When a body travels equal distances along a circular path in
equal intervals of time, then the of body is uniform. However, the direction of motion of
the body changes at every point of circular path. Due to this continuous change in
direction of motion, the velocity is no longer uniform, the motion is an accelerated
motion. In uniform motion, the velocity is constant and acceleration is zero.
Centripetal Force: A force which keeps a body moving with a uniform speed along a
circular path and directed along the radius towards the centre. The magnitude of the
centripetal force on an object of mass m moving at tangential speed v along a path with
radius of curvature r is given by
F=ma= mv2/r. where a is centripetal acceleration.
Centrifugal Force: It is the apparent force that draws a rotating body away from the
centre of rotation. The centrifugal force is in the direction opposite to the direction of
centripetal force. It is not the force reaction of centripetal force and it is not real force but
it is a fictious force.
A body of mass 1.50kg is dropped from second floor of a building which is at a
height of 12 m. What is the force acting on it during its fall? (g=9.8m/s2).
Is it possible to have an accelerated motion with a constant speed? Explain.
With reference to their direction of action, how does a centripetal force differ from
a centrifugal force?
Which of the following remains constant in uniform circular motion, speed or
velocity or both?
Name the force required for uniform circular motion. State its direction.
Additional question: Explain the law of conservation of energy with a help of a day to
day life example.
Answer Key of Physics Worksheet-1
a) Weight of the body placed at centre of earth is Zero.
b) S.I unit of moment of force is newton-metre.
c) Support
Tension force
Gravitational
Force (weight)
d) 1) If force is applied on rigid body then there will be no change in the shape or size
of body, it will change its state of motion or rest.
2) If force is applied on non rigid body then there will change in shape or size of
body.
e) Contact forces: These forces acting between two bodies in contact. Example:
Friction.
Non contact forces: These forces do not involve physical contact between the two
objects but act through the space between them. Example: Gravitational force.
Magnitude of non contact force between two objects is inversely proportional to the
square of distance between them.
f) 1 Newton is defined as force applied on an object of mass 1kg to accelerate it at
rate of 1 m/s2.
1 Newton = 1kgms-2
= 1x1000g x 100cm x 1s-2
.
1 Newton = 100000 gcms-2
.
1 Newton = 105 dynes.
g) Mass: 1) it is the measure of the number of atoms or amount of matter in an object.
2) It is constant foe a body and does not change with place.
Weight: 1) It is a force exerted by an object of fixed mass due to gravity.
2) It is not constant for a body, but it changes from place to place.
Class 10 Chemistry Worksheet-2
Ionisation potential or ionization energy
It is the amount of energy required to remove an electron from the outermost shell of an
atom.
In a group when we move from top to bottom the atomic size increases force of
attraction between the nucleus and outermost electron decreases therefore ionization
energy decreases down the group.
In a period as we move from left to right ionisation potential increases because atomic
size decreases nuclear charge increases at the force of attraction between the protons and
the outer electrons increases.
Electron affinity
It is the amount of energy released when an atom gains an electron in an isolated gaseous
state.
In a group as we move from top to bottom in a group electron affinity decreases because
atomic size increases and the force of attraction between the protons and the outer
electrons decreases.
In a period as we move from left to right in a period electron affinity increases because
atomic size decreases nuclear charge increases as we move from left to right.
Electronegativity
it is the tendency of an atom to attract the shared pair of electrons towards itself .
In a group as we move from top to bottom in a group atomic size increases nuclear
charge increases and electronegativity decreases
In a period as we move from left to right in a period atomic size decreases nuclear
charge increases force of attraction between the protons and the outer electron increases
therefore electronegativity increases from left to right
Metallic character
an element is said to be metal when it loses electrons to attend the stable configuration
and an element is said to be nonmetal when it gains electron to attain the stable
configuration.
In a group as we move from top to bottom in a group atomic size increases and tendency
to lose electrons increases down the group therefore metallic character increases down
the group.
In a period on moving from left to right in a period atomic size decreases force of
attraction between the protons and the outer electrons increases thereby gaining and
electron and atom becomes more and more non metallic towards the right side so we can
say that metallic character decreases in a period but non metallic character increases in a
period on moving from left to right
Class 10 Biology Worksheet -2
STUDY THE DIAGRAM GIVEN BELOW
FEATURES OF THE HEART
Heart is located roughly between the two lungs
It is protected by the membrane called pericardium.
It has four chambers- two auricles and two ventricles.
Ventricles have thick walls as compared to auricles.
Veins carry deoxygenated blood back to the heart except pulmonary vein.
Veins have thick muscular walls and valves to prevent back flow of blood.
Arteries have thin muscular walls and carry oxygenated blood away from the
heart except pulmonary artery.
Capillaries are the minute blood vessel which join artery and veins.
Functions of various parts
HEART—Helps to pump the blood
Valve—prevents the back flow of the blood.
Coronary artery—Supply blood to the heart musckes.
Aorta—Largest artery which supplies oxygenated blood to all parts of the
body.
Pacemakers—Initiate the heart beat.
Vena Cava --- Largest vein which supplies deoxygenated blood back to the
heart.
ANSWER THE FOLLOWING QUESTIONS
1. Name the membrane which protects the heart ?
2. Give the location of the heart ?
3. Write two differences between artery and vein.
4. What is the function of coronary artery?
5. What is pace maker?
6. Why are valves present in the heart?
7. What is capilliary?
ANSWERS TO WORKSHEET 1
1. CONES AND RODS
2. SUSPENSORY LIGAMENT
3. YELLOW SPOT
4. BECAUSE IT DOES NOT HAVE RODS AND CONES.
5. A—IMAGE FORMATION OCCURS HERE.
B-- GIVE NOURISHMENT TO THE EYE.
C—ALTER THE SHAPE OF THE LENS.
D—REGULATES THE AMOUNT OF LIGHT ENTERING THE EYE.
E—GIVE COLOUR TO THE EYE.
Class 10 Commercial Studies Worksheet-1
TOPIC:STAKEHOLDERS IN COMMERCIAL ORGANISATIONS
As we all know that, a business enterprise or commercial organisation interacts closely with
several social groups and these interactions gives rise to common interests between these social
groups. The term ‘stakeholders’ has developed from the word ‘stake’ which means an interest or
expected benefit.
Stakeholder means all those who are having interest in the functioning and performance of a
business enterprise or commercial organisation.
Stakeholders can have positive and negative impact on a commercial organisation. On the
positive side ,it is through the stakeholders that the organisation gets finance (banks),raw
materials(creditors), labour(trade unions)etc.
Stakeholders help the organisation in selling and distribution of its products and services.
On the negative side stakeholders may block or interrupt the functioning of an enterprise when
their expectation are disregarded for example Trade union strike when wages of labours are not
increased.
Creditors may stop supplying raw materials when timely payment is not done.
Meaning and characteristics of stakeholders: 1. All those who are having interest in the functioning and performance of business enterprise.
2. These are of two types: internal stakeholders and external stakeholders.
3. It includes shareholders employees banks etc.
4. They take risks of the organisation.
5. They share profits in the form of wages, dividend, salaries and interest.
6. They have financial stake in the business and also participates in the management of the the
organisation.
Shareholders: All those persons and groups who own shares of the company are called shareholders.
1. Shareholders are one of the stakeholders i.e. internal stakeholders. Shareholder is one of the
owner of the company.
2. They contribute towards the share capital of the company by buying the shares of the company
that is they have financial stake in the company.
3. They undertake a risk of loss on investment made in the company.
4. They are members of the company hence enjoys voting rights.
Creditors: 1. They are external stakeholders.
2. They provide loan raw materials to the company.
3. they do not share any profits of the company but receive interest for loans provided.
4. They are not a member of a company and they don't have any voting rights.
Customers: 1. They are not stakeholders as they do not have financial stake in the company.
2. They do not invest money in the company and neither entitled for dividends from the company
nor they share the profits of the company.
3. They do not undertake risk as they do not invest in the company.
4. They buy goods and services of the organisation and products are manufactured according to
the taste of the customer.
Types of
Stakeholders:
Internal stakeholders:
Internal stakeholders are entities within a business(e.g. employees ,managers, the board of
directors, investors).
External stakeholders:
External stakeholders are entities not within a business itself but who care about or are affected
by the performance(e.g. consumers, creditors, investors ,suppliers).
Difference between internal and external stakeholders:
Internal Stakeholders External Stakeholders
1. They operate from within the organisation. 1. They operate from outside the organisation.
2. They actively participate in the management
and working of the organisation.
2. They do not participate actively in the
management and working of the organization.
3. They consist of employers(owners and
managers) and employees.
3. They consist of suppliers, customers,
competitors, government and general public.
Expectations of stakeholders: Every stakeholder group expect something from a business organisation. The Expectations of
different stakeholders are stated below.
Expectations of employers(owners, shareholders and managers) 1. Reasonable return.
2. Appreciation in share value.
3. Safety of capital.
4. Information of financial position
5. Participation in decision making policy of the company.
Expectation of employees 1. Job security
2. better working environment
3. opportunity for growth in career.
4. various facilities for example medical insurance ,PF ,gratuity, pension etc.
5. Quick and fair redressal of grievances.
6. Affair admiration in the form of wages and salaries.
7. Protection of trade union rights.
Expectations of suppliers 1. Fair prices for the supplies.
2. Regular and timely payment according to credit terms.
3. Reasonable terms of delivery and payment.
4. Regular orders for supply.
5. Correct information about the company's financial position.
6. Healthy and cooperative interpersonal relationship.
Expectations of creditors 1. Safety of loans given by them to the Enterprise.
2. Regular payment of interest at specified Times.
3. Return of loans on the expiry of the specified time period.
4. Accurate and up-to-date information about the financial health of the Enterprise.
5. Security in the form of mortgage of asset or personal guarantee by owners of the enterprise.
Expectations of government An ideal government should expect
1. To follow the laws and regulations of the country.
2. To pay all taxes honestly regularly and in time.
3. To avoid corrupting public servants.
4. To make proper use of scares resources of the nation.
5. To assist in solving National problems like poverty ,unemployment ,unbalanced regional
growth etc.
Expectations of general public Society or community expects
1. To protect the environment from all types of pollution.
2. To produce socially desirable products in accordance with National interest and priorities.
3. To help weaker section of society by giving them preference in employment and other fields.
4. To donate funds for charitable and public welfare activities.
5. To preserve social and cultural values.
6. To respect Human Rights including rights of women and children.
Answer the following questions:
1. Define the term stakeholders.
2. Difference between internal and external stakeholders.
3. State any two expectations of employees from business concern.
4. State any two expectations of general public from a business organisation.
5. Differentiate between shareholders and customers.
6. Why customer is not a stakeholder in a firm?
Class 10 S.St. Worksheet-2 (Geography)
SOILS In INDIA
IMPORTANCE OF SOIL
Soil supports plants, animals aswell as human life. Life depends on the food we eat and
soil is the source of that food for man and animals. Thus, agricultural Production depends
on the fertility of soil.
FORMATION OF SOIL
Defination: Soil essentially is the loose material which forms the thin surface layer of the
earth. Its formation is related to the parent rock material, relief, climate and vegetation.
Animals insects and man also play an important role in the formation of soil
1. Soil is formed under specific natural conditions. It is a mixture of minerals or inorganic
matter which results from denudation and disintegration of rocks .
2. Soil is a renewable natural resource though it takes a long time to regenerate it.
3. The process of soil formation is called Pedogenesis.
COMPOSITION OF SOIL
Soil is a mixture of inorganic material, minerals and organic materials like humus.
Inorganic Components
The soil is composed of three main substances
1. Silica- ispresent soil in the in the form of small crystalline grains, the main constituent
of sand. It is derived from the disintegration of rocks.
2 .Clay: is a mixture of silicates and many other minerals such as iron , calcium, sodium,
potassium and aluminium. Clayey soil retains moisture
3. Chalk:(calcium Carbonate)- provides the most essential element for plant growth
which is calcium.
Organic Components
These determine the fertility of the soil. They are derived from the decay of vegetable
matter. The ultimate form of organic matter is humus.
1. It is organicmatter because itis formed by the decomposition of plant remains, animal
waste and dead animals
2. It helps the soil to retainmoisture
3. It imparts fertility to the soil
4. It also helps the plant to draw nutrients from the soil essential for its growth.
CHARACTERISTICS OF DIFFERENT SOILS
1. Sandy Soil
2. Clayey Soil
3 Loam.
SOIL EROSION
Soil erosion is the removal of topsoil by different agents of weathering such as_
1. RunningWater
2. Wind
3. Overgrazing
4. Men, plants and animals.
5. Faulty methods of agriculture
Runningwater : -
There are several ways in which soil erosion takes place due to running water-
1. Splash Erosion
2. Sheet Erosion
3. Gully Erosion
4. Rill Erosion.
5. Stream Bank Erosion
1. Splash Erosion:_
Where soil is pulverized by the impact of heavy drops and hailstones .
2. Sheet Erosion: -
Due to heavy rains,a surface film of water carries away the even surface layer of the
topsoil as it moves.
3. Gully Erosion :-
When there is a heavy downpour of rain , the soil is removed by water flowing along a
definate path down the slope in a channel. The gullies become wider and deeper forming
deep ravines .
A region where there is a large number of deep gullies or ravines are called- Badlands.
For example:_ Chambal valley in Madhya Pradesh
4. Rill Erosion: -
In this type of erosion finger like rills begin to appear and over a period of time they
increase in number and become deeper and wider.
5 . Stream Bank Erosion: -
The banks of the streams Or rivers get eroded every year. During floods the erosion
widens the river bed.
Shore erosion : -
The coastal rocks get eroded by- tidal waves which continously dash against coastal
rocks .It is very common in the eastern coast where cyclonic storms and floods are
common.
Wind Erosion: -
Wind is most powerful agent of erosion in deserts and where there is little or no
vegetation cover. The winds blow fine particles of sand and deposit them in other areas
turning them unproductive .
For Example_ Sand from Rajasthan desert covers the fertile Gangetic plains .
Overgrazing :-
Due to overgrazing wind erosion occurs as the soil is devoid of vegetation.
Men, Plants and Animals: -
Man's activities like- Construction work, ploughing, cutting down trees causes soil
erosion. Overgrazing by animals and uprooting of plants also results in dismantling the
soil.
Faulty Methods Of Agriculture
1. Shifting agriculture as in NE India.
2. Lack of crop rotation
3. Wrong ploughing
Areas Of Soil Erosion In India
1. Outer Himalayas (The Shivaliks )
2. River Banks
3. N E region of India.
4. Arid areas of Rajasthan
5. Hills of South India
SOIL CONSERVATION : -
It is an effort made by man to prevent soil erosion to retain the fertility of the soil
Soil is our most precious resource.
Several measures have been adapted by the Government to prevent soil erosion.
l. Afforestation
2. To check Overgrazing
3. Construction of dams and barrages
4. Improved techniques of agriculture
i Contour method of ploughing
ii Terraced farming
iii Crop rotation
iv Planting of cover crops
5. Shifting or Jhuming or slash and burn type.
6. Belts of trees and shrubs should be planted.
7. Planting of Shelter Belts
8. Reclamation of Waste
9. Technical and financial help given to the farmers by the government.
Imp Terms
1 Soil: - It is the loose material which forms the uppermost layer of the mantle rock. It
supports life.
2. Top Soil: - It is the upper most layer of the soil consisting of humus which is very
fertile.
3. Leaching: - It is the process in which the top mineral nutrients are washed away
thereby making the top soil infertile.
4. Soil Erosion: - The removal of the topsoil by different agents like wind and water is
known as soil erosion.
5. Soil Conservation :- It is an effort made to prevent soil erosion or reduce the rate of
soil erosion.
6. Humus : - It is the dark organic material in soils produced by the decomposition of
vegetables or animal matter and is essential to the fertility of the soil.
MAJOR SOIL GROUPS OF INDIA
India has a large variety of soil groups distinctly different from each other by way of
their- origin, colour , texture , fertility and chemical composition.
Geologically, Indian soils can broadly be divided into two main groups -
1. Soils of Peninsular India-
are those which have been formed by the decomposition of rocks in situ i.e directly from
the underlying parent rocks. They are also known as Sedentary Soils.
2. Soils of extra peninsular India or Northern Plains : -
are formed by transported or residual alluvium brought down by the rivers from the
Himalayas or by wind. These sods are also known as transported soil.
CLASSIFICATION OF SOIL
The Indian Council of Agricultural Research (ICAR) set up an all India Soil Survey
Committee in1953 which divided Indian soils into following major groups: -
1. Alluvial Soils
2. Black Soils
3. Red Soils
4. Laterite and Lateritic Soils.
Alluvial Soil- They are divided into two types :-
YOUNG KHADAR SOIL
1 These are newer alluvium.
2. These contain fine sand and clay.
3. They are pale brown in colour.
4. They are found at the lower levels near the rivers.
5. These are frequently inundated and replenished by floods during rainy season.
6. Khadar occupies the flood plains of the rivers and is enriched by fresh silt deposits
every year.
OLD BHANGAR SOIL: -
1 These consist of older alluvium
2. These contain Kankar pebbles and gravels.
3. They are darker in colour and vary from light grey to ash grey.
4. They are found30m above the flood level of rivers.
5. They represent the riverine alluvium brought down by sutlej, Yamuna, Ghagra and
other rivers of indogangetic plains.