Post on 16-Feb-2019
Gexcel
JRC 3D Reconstructor
SPHERICAL IMAGE REPROJECTION
JRC 3D Reconstructor Spherical image reprojection
In this tutorial you will learn how to
Re-project a spherical image on the point cloud
1. Overview 2. Procedure 3. Contacts
GEXCEL
JRC 3D Reconstructor Spherical image reprojection
Select point cloud center in local origin through the button set the Bubble view by
1. Overview 2. Procedure 3. Contacts
GEXCEL
JRC 3D Reconstructor Spherical image reprojection
Create the spherical camera through Survey menu Create Camera Create spherical camera A spherical camera will be created in the laser scanner position
1. Overview 2. Procedure 3. Contacts
GEXCEL
JRC 3D Reconstructor Spherical image reprojection
Associate the spherical image to the spherical camera. Select camera Right mouse button Set projector image Choose the image to be associated
1. Overview 2. Procedure 3. Contacts
GEXCEL
JRC 3D Reconstructor Spherical image reprojection
Load the projector. Rotate the camera using the Adjust Pose Window according the objectcoordinates, around Y axes
1. Overview 2. Procedure 3. Contacts
GEXCEL
JRC 3D Reconstructor Spherical image reprojection
Final result
1. Overview 2. Procedure 3. Contacts
GEXCEL
JRC 3D Reconstructor Spherical image reprojection
If you need some more information, please contact
our Gexcel Sales Team writing to
sales@gexcel.it
Phone (+39) 030 6595001
3. Contacts1. Overview 2. Procedure
GEXCEL