Post on 07-Oct-2020
Ramset is unique in the world of construction tools, fasteners and sealant manufacturing. Overall, 98% of Ramset fasteners and accessories are made in the USA.
Sound Control Sealant SC200
Features and Benefits• Cross line and plumb points all inone easy to use laser
• Locking mechanism (pendulum lock) increases the durability and preserves calibration
• Locked line mode allows for more complicated layouts; i.e., sloped areas, tile patterns
• Audible out-of-level alert
• Rugged rubber housing protects precision laser components
Applications• Drywall track layout
• Trim, windows and door frames
• Soffits
• Suspended ceiings
The RL510 is a fully automatic rotating laser that can be used for leveling, vertical alignment,
plumbing and squaring. Applications include installing suspended ceilings, soffits, stud & track
layout and a variety of interior alignment tasks.
Advanced Features• Integrated motorized wall mount adjustable by remote control
• Automatic self leveling in both horizontal and vertical modes
• Manual leveling mode for slopes or inclined planes
• Choice of beams: Rotating, Scanning, Chalk line
• Easy field calibration
RL510 LASeR
DRywALL SyStemS
Ramset Sound Control Sealant is used to
reduce sound transmission and increase
acoustical performance in gypsum wall
board partition systems. Adheres firmly
to wood, metal, concrete and gypsum
drywall surfaces. Ramset sound Control
Sealant bridges gaps and building material
irregularities up to 3/8” wide and 3/8” deep.
LongeR LiFe 160 hours on two D alkalines
40 hours on rechargeable NiCad
SAVe time Built in wALL moUnt
virtually eliminates setup
See tHe LigHt Laser target allows you to use in high ambient light applications
HAnDS FRee Remote allows you to adjust the
laser from where you work ITW Ramset700 High Grove Blvd., Glendale Heights, IL 60139Phone: 630.825.7900 Fax: 630.893.12701.800.RAMSET6 (1.800.726.7386) www.ramset.com
Specifications• Leed EQ Credit 4.1: Low-Emiting
Materials: Adhesive & Sealants
• Meets ASTM E84, C919, E90
• 0/0 Flame and Smoke Spread Rating
• UL Classified
• Waterbase formula
Revolutionary Universal StandThe stand is a tool unto itself that helps make the RL2+ the most versatile laser on the market today.
• Integrated laser stand works on studs and floor (patent pending)
• Magnetic: Powerful magnets easily secures to steel stud, even 25 gauge dimpled stud
• Stand works with 2” deep leg track
• Stand can bump the track to allow for plumb point alignment
Features and Benefits• Locking mechanism (pendulum lock) increases the durability
and preserves calibration
• Audible out-of-level alert
• Rugged rubber housing protects precision laser components
• Third beam can be turned off to increase battery life
Applications• Drywall track layout
• Trim, windows and door frames
walls & Ceilings
Fully Automatic Cordless gas Fastening System
The Power of the T3 allows you to consistently
shoot where no other gas tool has gone before. The
.125 diameter pin is specifically engineered to work in the
toughest concrete and steel where other pins cannot perform.
The new T3 system delivers power that rivals other gas and powder systems.
the most powerful tool in its classThe XT540's combination of high power and durability make it perfect for these applications:
• Driving 1-1/4” embedment for perimeter track
• Fastening track & clips to structural steel
• Track to hard concrete
As a commercial drywall framer, you’re responsible for the
entire project: front to back, top to bottom, inside and out. Since
each aspect of the job has it’s own unique challenge, your tool and
fastener combination may be the difference between success and failure.
That’s why when it comes to your drywall tools, look no further than
Ramset’s Drywall Systems.
Powerful new FeaturesThe Ramset T3 fastens into hard concrete and steel with ease using these engineered features:
• 25% more power
• Larger diameter pin (.125) for higher stick rate
• Deep leg track capability
• Easy push down force
• One step fuel injected system
• 15-pin strip, 45-pin magazine
• Improved battery system
Features• Fully automatic system with 150 nail capacity is 3-5 times faster than screws
• Aggressive, patented nail shank design provides high pullout performance
• Contoured bulge head style provides high pullover (wind) resistance
• Long life Climacoat ™ finish is 10 times more corrosion resistant than electro-zinc plating
Applications• Exterior Gypsum sheathing to steel framing
• Expanded metal lath to steel framing
• Woven wire mesh to steel framing
• Blocking
The XT540 was specifically designed for
the commercial framer for heavy-duty
interior & exterior applications.Ramset has always set the standard for Driving Jobsite Speed.
For attaching exterior sheathing to light gauge steel framing
3000-Shot rechargeable battery with easy off switch that locks into place to extend battery life
Features • No more increasing pin size to achieve required embedment
• Less wear and tear on tools and manpower
• Head stamps make for easy inspection
true embedment Fasteners
TR
UE EMBEDM
EN
T
RAMSET©
extreme Fastening
Features • Low recoil .27 caliber strip tool
• Dial down 2 full loads
• Ergonomically balanced
• Automatic piston return
• Trigger lock & hand guard to increase safety
• Capacity for up to 3” straight pin
How they work:For example, using the 1” .157 TE Pin, the actual embedment depth into the concrete is 1”. There is no longer a need to use a 1-1/4” pin for 1” embedment.
Concrete PinsSteel PinsRamset’s Power Point technology and unique pin design provides for easier penetration into hard steel reducing failures and increasing holding value.
.157".157"
1/16"1/16"
1-1/16"1-1/16"
True EmbedmentTrue Embedment1"1"
.157"
.545"