Post on 25-Apr-2018
NEW!
SOLID BRASS MATT BLACK HARDWAREsophist icated coatingprocess provides highestquali ty matt black f inish
OFFSET WALL BRACKET
SMALL GLASS BRACE BRACKET
LARGE GLASS BRACE BRACKET
WALL BRACKET
SQUARE L SHAPE KNOB
ROUND FULL KNOB ROUND RECESSED KNOB
SMALL ADJUSTABLE PANEL SUPPORT ARM BRACKET SQUARE D HANDLE*stainless steel
SQUARE RECESSED KNOB
GLASS TO GLASS HINGE WALL HINGE OFFSET WALL HINGE 135° HINGE
ROUND SLIMLINE KNOB
GRUB SCREWS - LOCTITEFor precaution, Loctite is used to secure threaded grub screws
FREE PLASTIC SCREW CAP COVERS INCLUDED
ALLEN KEY HEAD SCREWSFor ease of installation and to minimise scratching caused by flat head screwdrivers, Allen Key head screws are used
CLAMPING PLATE SMART DESIGNRecessed clamping plate ensures perfect fit to hinge body
SEALED SPRING CAVITYInnovative design ensures spring cavity is sealed. Issues with water penetration into cavity are overcome
SPRING DESIGNDurable tempered stainess steel spring
KNURLED BACK SCREWSAdvantage of superior locking action to prevent screwsworking loose
NEW HINGE PLATEHinge plate hole distance optimised for maximum clamping action
NEW SCRATCH PROTECTORSNeatly positioned protectors to prevent issues when hinge opens & closes
EPDM GASKETS SUPERIOR QUALITYGaskets pre-glued to hinges and overlapping plates for ease of installation
HINGE FEATURES
2MM REAR WALL THICKNESSThin back wall to minimise gap between wall and glass panel
INTERIOR PACKERSPlastic packers are pre-affixed to interior back and side walls to prevent glass from touching metal
CLEAR PVC BACK PACKERThin clear PVC affixed to back to minimise issues when installing to a tiled surface
ALLEN KEY HEAD SCREWS2x hex head screws for secure friction fitting to glass panel. Internal screw heads are flat with plastic capping
MATT BLACK FINISHBrass fitting with high quality matt black finish
COUNTERSUNK INTERNAL BACK HOLEFlush screw fixing with countersunk hole(1x wall screw with plug included in box)
SUITS 8MM & 10MM GLASS PANELS
BRACKET FEATURES