Post on 25-Aug-2018
smpte 304 hdtv coNNectioN system
3k.93c.y series
New design, less components
The FS contact used in the 3K.93C.Y series
is a re-design of the original F2 contact devel-
oped in 1992. The new FS has a reduced
number of components and fits into a new
designed connector.
This new product line has less components
and makes no compromise on quality and the
new version is still fully SMPTE 304 interface
compatible. The insulator is now made in two
parts with sideways insertion of the FS optical
contact meaning a dedicated contact extrac-
tion tool is no longer required.
Advantages:
– New design allows easy fibre length
adjustment
– No half-shells are required
– Increased internal space for the fibres
and electrical conductors
– Epoxy curing time for the optical contacts
halved to 20 minutes.
2 www.lemo.com
® ®
Precision modular connectors to suit your applicationSince its creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pullconnectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in morethan 80 countries with the help of over 40 subsidiaries and distributors.
Over 75000 connectorsThe modular design of the LEMO range provides over 75000 connectors from miniature ø 3 mm to ø 50 mm, capable ofhandling cable diameters up to 30 mm and for up to 114 contacts. This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in mostmarkets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommunicationsand military.
LEMO’s Push-Pull Self-Latching Connection System
The LEMO self-latching system allows the connectorto be mated by simply pushing the plug axially into the socket.
This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolutesecurity against vibration, shock or pull on the cable, and facilitates operation in a very limited space.
CE markingCE marking means that the appliance or equipment bearing it complies with the protection requirements of one orseveral European safety directives. CE marking applies to complete products or equipment, but not to electrome-chanical components, such as connectors.
RoHSLEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parliamentand the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical andelectronic equipment marketed in Europe.
Once firmly latched, connection cannot be broken bypulling on the cable or any other component part otherthan the outer release sleeve.
When required, the connector is disengaged by a single axial pull on the outer release sleeve. This first disengages the latches and then withdrawsthe plug from the socket.
The LEMO 3K.93C.Y connectors with keys (W), ideal for blind mating, were developed to meet the critical requirementsof the new generation of digital HDTV cameras.The main features of this series are as follows:– Security of the LEMO Push-Pull self-latching system– Fitted with the new LEMO Fs fibre optic contacts.– Conforms to the Japanese ARIB technical report BTA S-1005B, to the SMPTE 304 standard and to the European
EBU Technical Recommendation R100-1999. – Cabled connectors have obtained the EC Attestation of conformity No: N8 00 03 39058 001
from the German TÜV Product Service.The 3K.93C.Y series consists of eight models which will accept cables specific to this application.
FUW
FXW
FMW
EDW
EBW
PUW
PEW
PBW
3K.93C.Y Series
Straight plug Free socketFixed sockets
Fixed plugs
Models (page 6)
Fixed sockets
3www.lemo.com
® ®
HDTV Camera
Outside Broadcast Van Configuration
Outside Broadcast Van
EDWfixed socket
CCU
FXWfixed plugFUW
straight plug
PUWfree socket
FMWfixed plug
PUWfree socket
Studio Configuration
HDTV Camera
EDWfixed socket
FXWfixed plug
Camera Control Unit
CCU
Patch unit
FMWfixed plug
PUWfree socket
FUWstraight plug
PUWfree socket
4 www.lemo.com
® ®
part section showing internal components
Straight plugFixed socket
outer shelllatch sleeveinner shellfront ringcollet nutinsulatorsmale HV cont.FO contact FO alignment device
4
3
5
1
2
7
6
9
8
anchor with screwsfemale LV contactearthing bodycrimp ringcollet with gasketsextended shello-ring
12
10
11
shellgrounding crown retaining ringinsulatorsfemale HV contactFO contactO-ringmale LV contactearthing tag
4
5
3
7
8
9
6
2
1
13
14
15
16
76 83 6 1539 11
1
169 16 1613 14 5
7 8 1 16 10 122425 4
0.10 dB IEC 61300-03-04 InsertionMethod B
≥ 45 dB IEC 61300-03-06 BranchingDevice Met.
optical
Average insertion lossfibre 9/125 µm
Return loss fibre 9/125 µm(UPC)
electrical
> 1012 Ω IEC 60512-2 test 3a< 1.6 mΩ IEC 60512-2 test 2f< 4.8 mΩ IEC 60512-2 test 2a< 3.6 mΩ IEC 60512-2 test 2a< 30 dBµV/m EN 55022 class B < 37 dBµV/m EN 55022 class B
Insulation resistanceShell electrical continuityContact resistance (signal)Contact resistance (power)
freq. 30-220 MHzfreq. 220-1000 MHz
Brass (UNS C 38500)Stainless steel (AISI 303)Special brassStainless steel (AISI 416)Bronze (UNS C 52100)Brass (UNS C 38500)Brass (UNS C 34500)Bronze (UNS C 54400)Cu-Be (FS-QQ-C-530)PEEKCopper (UNS C 18700)Brass (UNS C 38500)Stainless steel (AISI 304L)Silicone MQ/MVQ, FPM/FKM (Viton®)
Materials and treatmentstechnical characteristics
Outer shell, collet nutand oversized collet
Grounding crownLatch sleeveLocking washerHexagonal nut or round nutMale crimp contactFemale crimp contactClipsInsulatorCrimping tube
Other metallic components
O-ring and gaskets
Radiatedemission
characteristics value standard
component material (standard)surface treatment (µm)
chrome nickel goldcu Ni cr cu Ni cu Ni Au
characteristics value standard method
0.5 3 0.3 without treatment
0.5 3 without treatment
0.5 3 0.5 3 0.5 3 1.0 0.5 3 1.5
without treatment
0.5 3 0.5 3
without treatment
5www.lemo.com
® ®
F U W 3 K
Type: 93C
Cable ø:96 = 8.9 to 9.5 mmCable fixing type:C = collet adapter
Housing: Stainless steel at interface
9 3 C
Series: 3KModel
Y S K C 9 6
Fibre contact: (page 8)
Insulator
Straight plug and free socket . . .
FUW.3k.93c.yskc96 = Straight plug with keys (W), 3K series, mixed type to accept 2 FS type fibre optic contacts, 2 power and 2signal electrical contacts, stainless steel housing, PEEK insulator, female crimp signal contacts, cable fixing type C for 9.2 mm diametercable.
Part number example
E D W 3 K
Type: 93C
Fibre contact: (page 8)Insulator
9 3 C
Series: 3KModel
Y S E
Housing: Stainless steel at interface
Fixed socket . . .
edW.3k.93c.yse = Fixed socket with rear square flange, keys (W), 3K series, mixed type to accept 2 FS type fibre optic contacts, 2power and 2 signal electrical contacts, stainless steel housing, PEEK insulator, male crimp signal contacts.
Z = Variant
mechanical and environmental
20000 cycles IEC 61300-02-02up to 95% at 60°C IEC 61300-02-19+80°C IEC 61300-02-18-40°C IEC 61300-02-17
-55°C + 90°C1000 N IEC 61300-02-042 m onto concrete floor IEC 61300-02-12100 g, 10-50 ms; 20 g 6-9 ms IEC 61300-02-09IP 68 IEC 60529> 144 h IEC 60512-6 test 11f
Mating durability (Stainless steel+St. steel)Damp heat steady stateHigh temperatureLow temperatureTemperature cyclingCable retentionImpact (Method A)Shock (3 cycles in 2 directions)Water resistance (Depth of 1.8 for 48 h)Salt spray corrosion test
20 1K500100
0.1
10
Frequency (Hz)
20050
0.01
0.0012K 5K
Spe
ctra
l den
sity
acc
eler
atio
n (G
2 /Hz)
20 Hz20-60 Hz60-200 Hz200-320 Hz320-600 Hz600-2000 Hz2000 Hzduration
0.009 G2/Hz+9 dB / octave0.24 G2/Hz-3 dB / octave0.147 G2/Hz-6 dB / octave0.014 G2/Hz180 s / axis
Vibrationcharacteristics value standard
Models3 K Y
6 www.lemo.com
® ®
9 3 C
20.6
ø 3.5 + 0.1 0
ø 23
.2 + 0
.1
0
94
ø 19
.5
ø 9.
2 ±
0.3
74
FUW.3K.93C.YSKC96 Straight plug, cable collet adapter and long shell for fitting a bend relief with cap
FXW.3K.93C.YSK Fixed plug, round flange (4 holes mounting), without collet
Panel cut-out
EDW.3K.93C.YSE Fixed socket with rear square flange, (4 holes mounting), and earthing tag
23
ø 3.5 + 0.1 0
ø 23
.2 + 0
.1
0
Panel cut-out
ø 38
51.530
10
40
3
22.5
29
20.6
ø 3.5 + 0.1 0
ø 23
.2 + 0
.1
0
FMW.3K.93C.YSKC96Z Fixed plug, round flange (4 holes mounting), cable adapter, for bend relief
Panel cut-out
ø 38
13030
10
Note: The bend relief must be ordered separately (see page 9).
Note: The bend relief must be ordered separately (see page 9).
7www.lemo.com
® ®
23ø 3.5 + 0.1 0
ø 23
.2 + 0
.1
0
22.6 + 0.1 0
ø 24
.2 + 0
.1
0
98
ø 23
ø 9.
2 ±
0.3
PUW.3K.93C.YSKC96 Free socket, cable collet adapter and long shell for fitting a bend relief with cap
EBW.3K.93C.YSE Fixed socket with front square flange, (4 holes mounting)
23
ø 3.5 + 0.1 0
ø 23
.2 + 0
.1
0
Panel cut-out
40
29
36
PEW.3K.93C.YSKC96Z Fixed socket, nut fixing, cable adapter, for bend relief (back panel mounting)
Panel cut-outø
30
4.57.5 max
135
PBW.3K.93C.YSKC96Z Fixed socket with rear square flange, (4 holes mounting), cable adapter, for bend relief
Panel cut-out
22.5133.5
3
29
Note: The bend relief must be ordered separately (see page 9).
Note: The bend relief must be ordered separately (see page 9).
Note: The bend relief must be ordered separately (see page 9).
Insert configurations9 3 c
8 www.lemo.com
® ®
Socket insulatorPlug insulator Conta
ct typ
e for
plug
Fibre
core
/clad
ding (
µm)
Ferru
le bo
re in
side ø
(µm
)
Num
ber o
f con
tacts
Conta
ct fun
ction
Conta
ct typ
e for
plug
Conta
ct ø
(mm
)
AWG
rang
e
Cree
page
dista
nce
and a
ir clea
ranc
e (m
m)
Wor
king v
oltag
e (V
rms)
Test
volta
ge (V
rms)
Rated
curre
nt (A
)
Fibre optic contact
Refe
renc
e
Num
ber
of fib
re o
ptic
cont
acts
93c
Fibre optic contact Electrical crimp contact
2 fem. 9/125 125
2 power HV male 1.3 14-18 > 6.5 ≤ 600 2250 10
2 signal LV male 0.9 20-24 ≤ 42 1000 3
male Fs Fibre optic contactFFs.Fs
Female Fs Fibre optic contactpss.Fs
Ferrule Contact Model Gender holeRef.
FFS.FS.BA2.YCE30 125 µm EDW / EBW MaleFFS.FS.BA2.YCT10 125 µm PUW / PEW / PBW MaleFFS.FS.BX2.YCE30 125.5 µm EDW / EBW MaleFFS.FS.BX2.YCT10 125.5 µm PUW / PEW / PBW MaleFFS.FS.BB2.YCE30 126 µm EDW / EBW MaleFFS.FS.BB2.YCT10 126 µm PUW / PEW / PBW Male
e
k
X
v
F
N
Note
l
l
l
l
l
l
l
l
s
s
l
l
PSS.FS.BA2.YCE30 125 µm FXW FemalePSS.FS.BA2.YCT10 125 µm FUW / FMW FemalePSS.FS.BX2.YCE30 125.5 µm FXW FemalePSS.FS.BX2.YCT10 125.5 µm FUW / FMW FemalePSS.FS.BB2.YCE30 126 µm FXW FemalePSS.FS.BB2.YCT10 126 µm FUW / FMW Female
e
k
X
v
F
N
l First choice - highest performances Alternative - tight-fitting fibrel Special order alternative - low toleranced fibre
Ferrule Contact Model Gender holeRef. Note
l First choice - highest performancel Special order alternative - low toleranced fibre
9www.lemo.com
® ®
Note: Other diameters and colours available upon request.
L
ø A
l Material: black ALCRYN®
l Material: Silicone
Accessories
9 42
Dim. (mm)
A L
GMA Bend relief
GMF Bend relief with cap for FUW plug
GMP Bend relief with cap for PUW free socket
GMF Coloured ring for bend relief with cap
GmA.3B.090.dN
Part number
greyblackred
green
Colour
GmF.3k.265.rG
GmF.3k.265.rN
GmF.3k.265.rr
GmF.3k.265.rv
Part number
GmF.3k.085.eANZ
Part number
l Material: black ALCRYN®
Gmp.3k.085.eANZ
Part number
10 www.lemo.com
® ®
GMl Gaiters
L
ø 14
mm
BHA.3K.100.EAN
BRA.3K.200.EAN BRF.3K.200.EAN
BHA.3K.100.715EN
BRA.3K.100.715EN
BFG.3K.100.EAN
M
ø A L
ø CB
N
Note: On request, this cap is available in black. If so replace the last letter«G» of the part number by «N».
l Material: PVC
redblackgreenblack
Colour
165165156156
DimensionL (mm)
PUWPUWFUWFUW
For connectormodel
Gmp.3k.140.165per
Gmp.3k.140.165peN
GmF.3k.140.156pev
GmF.3k.140.156peN
Part number
BRR Spring loaded dust cap for EDW and EBW
l Material: Polyoxymethylene (POM) grey (or black)
Brr.3k.200.pZsG
Part number
29 29 23 8.1 3 33.2
Dimensions (mm)
A B C L M N
Bll Blanking caps
l Material: black ALCRYN®
FMW, FXWEDW, PEW
FUWPUW
FMW, FXWEBW, EDW, PBW, PEW
For connector model
BhA.3k.100.eAN
BrA.3k.200.eAN
BFG.3k.100.eAN
BrF.3k.200.eAN
BhA.3k.100.715eN
BrA.3k.100.715eN
Part number
11www.lemo.com
® ®
22
ø 4
.4
WST Fibre shield for oven curing (only 3K.93C.Y)
l Material: Nickel plated brass
Wst.tU.194.LN
Part number
Wst.FB.ci1.10Us2 video inspection viewer
Wst.ki.125.34 cleaning kit F2/Fs contact
Fibre optic cleaning kit of 2 cotton buds, 1 dry and 1 being soaked in IPA(Isopropyl Alcohol) used for cleaning the fibre optic contacts.
dcs.F2.035.pN Alignment device tool
Simple tool with two threaded end for installation/extraction of the F2/FScontact alignment device. For use with WST.KI.125.34 kit above.
A portable fibre optic viewer for F2/FS contact consisting of handset probe,LCD display, ferrule tips for LEMO contacts & software & United States -AC power supply all in a rugged case. European power supply version (WST.FB.CI1.10EU2). An optional USBcapture device is also available (part number: WST.FB.CI1.00USB2).
Wst.te.hdtv hd cable tester
The LEMO cable puller, is a pull through tool that allows passing the cable through narrow sections and protects the optical fibre during installation.
This cable tester provides a quick and easy means of checking thefunctionality of HD hybrid fibre cables and cable systems. A laser sourcechecks the fibres giving an indication of the attenuation through the wholecable or cable system, and electrical tests check for continuity of both thepower and control conductors.
dcs.3k.175.72LN cable puller
Tooling
dcs.F2.N02.pA Fibre optic one-click cleaner
Insert the one-click cleaner into the insulator and push until an audible“click” is heard. The cleaner uses a mechanical push action to advancean optical grade cleaning tape. More than 500 cleaning per cleaner.Product includes special LEMO F2/FS ferrule adaptor.
Note: Available on request.
12 www.lemo.com
® ®
Cable assembly
MSO.3K.93C.AM025NS = 1 FUW plug and 1 PUW socket (key W), 3K.93C.Y series, on a SMPTE 311M screened cable,25 m length, sheath o 9.2 mm, black RAL 9005 jacket colour, with GMF/GMP bend relief with cap.
Cable length
Model 1 (table 1)
Model 2 (table 1)
Sheath ø & material(table 2)Length unit & gaiters(table 3)
A M 0 2 5 N S M S O 3 K 9 3 C
Part Number Example
Cable
S = SMPTE 311MA = ARIBK = Aramid strength member similar to Kevlar®
Table 4Cable supplier& sheath colour
Table 2Sheath ø& material
Code
Cable supplier& sheath colour(table 4)
Table 3Length unit& gaiters
. . .
Cable supplier& sheath colour
Northwire BlackNorthwire GreyNorthwire BlueFurukawa Black
Belden Black
N
G
A
F
B
Code
Table 1Model
Model1 & 2
FUWFXWPUWEDWFMWPEWPBW
s
N
o
y
A
c
J
Code
Sheath ø(mm)
9.2 4.2 6.8 12.0 16.0
A
B
c
d
e
PVC
r
s
t
U
v
PUR
NoGaiter
cmdmmkminchfeet
c
d
m
k
i
t
E F G N J L
Red gaiter free socketGreen gaiter plug
2 blackgaiters
2 yellowgaiters
13www.lemo.com
® ®
FMW PUWBHA BRF
Cable assembly with one fixed plug (FMW) and one straight socket (receptacle) (PUW), both complete with BHA/BRF caps. MAO Internal OB van cable assembly
FXWBHA EDW BRA
Cable assembly with one fixed plug (FXW) and one straight socket (receptacle) (EDW), complete with BHA cap. MNY Studio/Infrastructure cable assembly
FUW + GMF PUW + GMP
Cable assembly with one straight plug (FUW) and one straight socket (receptacle) (PUW), both complete with GMF/GMPbend relief with cap.
MSO Outside broadcast cable assembly
FUW + GMF PUW + GMP
Cable assembly with one straight plug (FUW) and one straight socket (receptacle) (PUW), both complete with GMF/GMPbend relief with cap and gaiters.
MSO Outside broadcast cable assembly
14 www.lemo.com
® ®
FXWBHA
Assembly cable with one fixed plug (FXW) and two pigtails (LC) complete with BHA cap. MNT ECU side duplex pigtails
EDWBRA
Assembly cable with one fixed socket (EDW) and two pigtails (LC) complete with BRA cap. MYT Camera side duplex pigtails
Duplex pigtails
MNT.3K.93C.YZZC050 = 1 FXW plug (key W), 3K.93C.Y series and two pigtails (LC) on the other side, 50 cm length.
Cable length (cm)
ModelN = FXWY = EDWT = Pigtail (LC)S = Pigtail (ST)C = Pigtail (SC)
Y Z Z C 0 5 0 M N T 3 K 9 3 C
Part Number Example
15www.lemo.com
® ®
outside Broadcast FUW-pUW
smpte 311 standard cable assemblies
DescriptionPart number
25 metre length50 metre length100 metre length200 metre length300 metre length400 metre length500 metre length
mso.3k.93c.Am025Ns
mso.3k.93c.Am050Ns
mso.3k.93c.Am100Ns
mso.3k.93c.Am200Ns
mso.3k.93c.Am300Ns
mso.3k.93c.Am400Ns
mso.3k.93c.Am500Ns
internal oB van
DescriptionPart number
3 metre length5 metre length10 metre length15 metre length20 metre length
mNo.3k.93c.Am003Ns
mNo.3k.93c.Am005Ns
mNo.3k.93c.Am010Ns
mNo.3k.93c.Am015Ns
mNo.3k.93c.Am020Ns
other cable assemblies, patch cords and pigtails available on request.
outside Broadcast FUW-pUW
AriB standard cable assemblies
DescriptionPart number
25 metre length50 metre length100 metre length200 metre length300 metre length400 metre length500 metre length
mso.3k.93c.Am025NA
mso.3k.93c.Am050NA
mso.3k.93c.Am100NA
mso.3k.93c.Am200NA
mso.3k.93c.Am300NA
mso.3k.93c.Am400NA
mso.3k.93c.Am500NA
internal oB van
DescriptionPart number
3 metre length5 metre length10 metre length15 metre length20 metre length
mNo.3k.93c.Am003NA
mNo.3k.93c.Am005NA
mNo.3k.93c.Am010NA
mNo.3k.93c.Am015NA
mNo.3k.93c.Am020NA
studio/infrastructure
DescriptionPart number
20 metre length50 metre length
mNy.3k.93c.Am020NA
mNy.3k.93c.Am050NA
studio/infrastructure
DescriptionPart number
20 metre length50 metre length
mNy.3k.93c.Am020Ns
mNy.3k.93c.Am050Ns
LEMO HEADQUARTERS
SWITZERLANDLEMO SA Chemin des Champs-Courbes 28 - P.O. Box 194 - CH-1024 EcublensTel. (+41 21) 695 16 00 - Fax (+41 21) 695 16 02 - e-mail: info@lemo.com
LEMO SUBSIDIARIES
LEMO DISTRIBUTORSARGENTINA, AUSTRALIA, BRAZIL, CHILE, COLOMBIA, CZECH REPUBLIC, GREECE, INDIA, ISRAEL, NEW ZEALAND, PERU, POLAND, RUSSIA, SOUTH AFRICA, SOUTH KOREA, TAIWAN, TURKEY, UKRAINE
www.lemo.com
AUSTRIALEMO Elektronik GesmbHLemböckgasse 49/E6-31230 WienTel: (+43 1) 914 23 20 0Fax:(+43 1) 914 23 20 11sales@lemo.at
BRAZILLEMO Latin America LtdaAv. José Rocha Bonfim, 214 Salas 224 / 225Condomínio Praça CapitalEd. ChicagoCampinas / SP - Brasil 13080-650Tel: +55 (11) 98689 4736info-la@lemo.com
CANADALEMO Canada Inc44 East Beaver Creek Road, unit 20Richmond Hill, Ontario L4B 1G8Tel: (+1 905) 889 56 78Fax: (+1 905) 889 49 70info-canada@lemo.com
CHINA / HONG KONGLEMO Electronics (Shanghai) Co., Ltd First Floor, Block E,18 Jindian Road, PudongShanghai, China, 201206Tel: (+86 21) 5899 7721Fax: (+86 21) 5899 7727cn.sales@lemo.com
DENMARKLEMO Denmark A/SNybrovej # 972820 GentofteTel: (+45) 45 20 44 00Fax: (+45) 45 20 44 01info-dk@lemo.com
FRANCELEMO France Sàrl24/28 Avenue Graham BellBâtiment Balthus 4Bussy Saint Georges77607 Marne la Vallée Cedex 3Tel: (+33 1) 60 94 60 94Fax: (+33 1) 60 94 60 90info-fr@lemo.com
GERMANYLEMO Elektronik GmbHHanns-Schwindt-Str. 681829 München Tel: (+49 89) 42 77 03Fax: (+49 89) 420 21 92info@lemo.de
HUNGARYREDEL Elektronika KftNagysándor József u. 6-121201 BudapestTel: (+36 1) 421 47 10Fax: (+36 1) 421 47 57info-hu@lemo.com
ITALYLEMO Italia srlViale Lunigiana 2520125 MilanoTel: (+39 02) 66 71 10 46Fax: (+39 02) 66 71 10 66sales.it@lemo.com
JAPANLEMO Japan Ltd2-7-22, Mita, Minato-ku, Tokyo, 108-0073Tel: (+81 3) 54 46 55 10Fax: (+81 3) 54 46 55 11lemoinfo@lemo.co.jp
MIDDLE EASTLEMO Middle East Gen. Trad. LLCConcorde Tower 6th Floor, Dubai Media City, P.O. Box 126732Dubai, United Arab EmiratesTel: +971 55 222 36 77info-me@lemo.com
NETHERLANDS / BELGIUMLEMO Connectors BeneluxDe Trompet 10601967 DA HeemskerkTel. (+31) 251 25 78 20Fax (+31) 251 25 78 21info@lemo.nl
NORWAY / ICELANDLEMO Norway A/SSoerumsandvegen 69,1920 SoerumsandTel: (+47) 22 91 70 40Fax: (+47) 22 91 70 41info-no@lemo.com
SINGAPORELEMO Asia Pte Ltd4 Leng Kee Road, #06-09 SiS Building Singapore 159088Tel: (+65) 6476 0672Fax: (+65) 6474 0672sg.sales@lemo.com
SPAIN / PORTUGALIBERLEMO SAUBrasil, 45, 08402 GranollersBarcelonaTel: (+34 93) 860 44 20Fax: (+34 93) 879 10 77info-es@lemo.com
SWEDEN / FINLANDLEMO Nordic ABGunnebogatan 30, Box 8201 163 08 SpångaTel: (+46 8) 635 60 60Fax: (+46 8) 635 60 61info-se@lemo.com
SWITZERLANDLEMO Verkauf AGGrundstrasse 22 B, 6343 RotkreuzTel: (+41 41) 790 49 40ch.sales@lemo.com
UNITED KINGDOMLEMO UK Ltd12-20 North Street, Worthing, West Sussex, BN11 1DUTel: (+44 1903) 23 45 43lemouk@lemo.com
USALEMO USA IncP.O. Box 2408Rohnert Park, CA 94927-2408Tel: (+1 707) 578 88 11(+1 800) 444 53 66Fax:(+1 707) 578 08 69info-US@lemo.com ©
CA
T.93
.LEN
.P05
18, u
pdat
ed J
uly
2018