Post on 10-May-2015
Cluster of Energy Efficient Technologies
Innovations in energy efficient technologies supported by Skolkovo Foundation
MISSIONRussia possesses the largest supply of energy resources in the world. This fact allowed developing economy for a long time without sufficient investments in innovations. At the same time, our country has created unique research and development potential that allows creating world-class technologies. Significant improvement of energy efficiency resulting from the development of new technologies is one of the most important mechanisms for turning Russia into a country with strong competitive innovation-based economy.
DEVELOPMENT PRIORITIES
Energy Efficiency Cluster supports the development of the newest technologies of energy generation, transmission and accumulation, enhancement of consumption efficiency, “green” energy. Such technologies both increase energy efficiency of the economy and become a base for emerging of new hi-tech Russian companies. Their commercial success will stimulate innovative economy development.
KEY OBJECTIVES: • Searching for innovative ideas and teams that
are able to perform the full cycle of innovation development, from research to commercial success
• Stimulating foundation of corporate R&D centers targeted to energy efficient technologies
• Involving scientists into solving actual technical problems facing the business, stimulating applied research
• Providing the most comfortable administrative environment and support for the innovators’ companies
• As a result, enhancing competitiveness of Russian energy efficient technologies in the world market
PARTICIPANTSOur cluster is an international community of the outstanding researchers and entrepreneurs, who generate innovative ideas and turn them into commercially successful products and technologies in the energy efficiency sector. Currently our cluster unites more than 130 innovative companies. The number of those who wish to join us is growing day by day; therefore we thoroughly choose our members and provide support only to the companies that carry out the most innovative R&D with high potential for commercialization. Residents of the Cluster receive various kinds of support from the Skolkovo Foundation and its partners: grants up to 300 mln. roubles, significant tax benefits, venture investments, access to the newest equipment, support of the global well-known research institutes and leading technological companies. Moreover our residents will get the opportunity to become a part of the future “Skolkovo” innovation center.
Cluster of Energy Efficient Technologies
Network pneumatic wave power generation plant with efficiency of up to 60% on waves from 1 meter high
KD Technology ZAO
THE ESSENCE OF INNOVATION• Array of plastic floats with pneumatic air com-
pressors connected by lever arms• Energy of each wave impacts floats• Relative motion of floats drives air compressors• Compressed air is produced and transmitted to
the shore, where electric power is generated
COMPETITIVE ADVANTAGES • Power generation on waves from 1 meter high,
with efficiency up to 60% • Competitive wave power generation technologies
provide efficiency up to 45% on waves not less than 5 meters
• Costs of electricity is as low as $0.17/ kW∙h as a result of cheap polymeric structures use
• Reduced maintenance costs due to on shore electrical equipment
PROJECT PRODUCTWave power plant
CURRENT PROJECT STAGE• Proof of concept by University College of Cork
(Ireland)• Efficiency of 54% proven by Swansea University
(UK)• 1:9 skale model is tested in a pool in Cork, Ireland
FINISHED PRODUCT AVAILABILITY• Offshore lab prototype – Q2 2013 • 1 MW plant protorype – 2014
KEY MARKETSUnited Kingdom, Japan, the United States, China and other countries with access to the sea
INTELLECTUAL PROPERTY• CRDF Global - Best 2011 Innovation Idea• Cleantech Connect, One to watch 2011 - 30 most
promising European start-ups
PROJECT NEEDS• Venture investments in 2012• Strategic investor in 2013• Pilot implementation sites for prototype models
REQUIRED FINANCING • 2012 : RUB 28.5 million• 2013-2014 : RUB 220 million
CONTACTS: Moscow, +7 (926) 170-01-17 www.vertlabs.org, oleg@vertlabs.org
Energy generation
Production technology of energy-efficient Spin-Cell heat exchangers for heat supply systems used in the housing and utilities sector
Energotekhnika LLC
CONTACTS: Moscow, Zelenograd, +7 (495) 972-38-44, lebedev@kurkino.net.ru
THE ESSENCE OF INNOVATION• Cell heat exchangers with swirling-flow heat
exchange tubes (Spin-Cell) • Cell structure of tube bundle without tube plate• Space between tubes is filled with hollow helical
fins
COMPETITIVE ADVANTAGES• Heat transfer coefficient is 1.5 to 2.5 times
greater than that of plate, and shell-and-tube heat exchangers
• Hydraulic resistance lower than that of plate heat exchangers
• Decreased scaling and scum• Light and compact design, resistant to thermal
and hydraulic impact• Cost and maintenance expenses could be
decreased by 15-30%
PROJECT PRODUCT • Heat exchangers for heating systems (500
Mcal/h) and hot water supply (200 Mcal/h)• Tool for calculating swirling flows (combination of
software and hardware)
CURRENT PROJECT STAGE • Pilot implementation• Completed: R&D, working design documentation,
pilot model manufacture and testing
FINISHED PRODUCT AVAILABILITYQ1 2013
KEY MARKETS Housing and utilities ($300 M), energy production sector, oil and gas, chemical, food processing and ship building industries
INTELLECTUAL PROPERTY Method for heat exchanger manufacturing is protected with 3 Russian patents
PROJECT NEEDS • Pilot implementation on sites• Financing for launch of manufacture
PROJECT FINANCING• Grants received – RUB 2.5 million• Own funds – RUB 3 million
REQUIRED FINANCINGRUB 18.2 million
Energy generation
Technology for manufacturing cost-effective and clean gas-fired mini power stations based on Solid-Oxide Fuel Cells
CONTACTS: Moscow, www.nf-venture.ru, nf.venture@gmail.com
THE ESSENCE OF INNOVATION• Innovative cost-effective solid-oxide fuel cells
(SOFC) production technology which is:– Sustainable technology– Cost-effective technology– Scalable
COMPETITIVE ADVANTAGES• Projected cost of SOFC production is 2-3 times
less than competitive technologies• Wider power-range of developed power stations
(0,5 – 25 kW, compared to 0,5 – 3 kW)• Simple and rugged design• Soundless clean tech generator with levelized
costs of electricity of $0.2 per kW∙h
PROJECT PRODUCT• Power station manufacturing technology• SPVs for power stations production in US, EU,
Japan
CURRENT PROJECT STAGE• Power station lab prototype was designed• Cost-effective SOFC manufacturing technology
was developed
FINISHED PRODUCT AVAILABILITY• Lab prototype devices – Q3 2013• Full-scaled prototypes – late 2014• Pilot production - 2015
KEY MARKETS• Households, small and mid-business, oil-and-gas
companies, utilities, heavy vehicles• Potential markets: US, Middle East, Japan, EU,
Russia, South-Eastern Asia
INTELLECTUAL PROPERTY• Cost-effective SOFC manufacturing technology
patented in Russia, US• Patent applications for power station designed
planed in Russia, US, Japan, EU
PROJECT NEEDS• Strategic partner and investor for production and
implementation in 2014• Technological partner in 2015• Pilot implementation sites for prototypes
PROJECT FINANCINGOwn funds $1,9 million
REQUIRED FINANCING Lab prototype – 0,7 millionFull-scaled prototype – $1,1 millionPilot production – $2 million
NF CJSC
Energy generation
Technology for the production of zirconium dioxide-based electrolytic membranes to manufacture energy-efficient high-temperature solid oxide fuel cells
GPI Innovation Center Co Ltd.
CONTACTS: Moscow, Prokhorov General Physics Institute of the Russian Academy of Sciences, +7 (499) 503-81-65, artemov@kapella.gpi.ru
THE ESSENCE OF INNOVATION• Development of solid oxide fuel cells (SOFC)
electrolyte based on stabilized monocrystals of zirconium dioxide (instead of ceramic elements)
• Processing of electrolytic membranes with new directional crystallization methods in the condi-tions of HF-melting, chemical and mechanical polishing and impact with intensive laser pulses
COMPETITIVE ADVANTAGES• New electrolyte has greater ion conduction and
strength, which increases power output and extends SOFC service life:
– Power density up to 1 W/cm2 –1.5-2 times greater than that of ceramic electrolytes
– Service life of 3-5 years, which is up to 5 times greater than that for analogues
– SOFC price of USD 350-400 per 1 kW, which is 1.5-2 times lower than for analogues
PROJECT PRODUCTMethod of SOFC electrolyte production with ion conduction of at least 0.02 (Ohm*cm)-1 at 730ºC, with SOFC efficiency of 80%, and service life of up to 5 years
CURRENT PROJECT STAGE• Batch of monocrystals was obtained for electro-
lyte production• Electrolytic membrane treatment technologies
were developed
FINISHED PRODUCT AVAILABILITY• Sample membrane – Q2 2013• SOFC prototype – 2014-2015
KEY MARKETS• Power sources using different fuels (hydrogen,
natural gas, synthetic gas)• Estimated SOFC market will reach USD 1.6 billion
by 2016 and will exceed USD 3.4 billion by 2021
INTELLECTUAL PROPERTYAt least 3 patent applications for electrolyte produc-tion methods and technology are expected to be filed in Russia, USA, Canada, EU, Japan, China
PROJECT NEEDS• Strategic partner and investor• Pilot implementation sites for prototypes, starting
from 2014
REQUIRED FINANCING • Development of prototype and membrane produc-
tion technology: RUB 30 million• Development of prototype SOFC based on mem-
brane: RUB 200 million
Electrolyte
SOFC
1 year
Energy generation
Solid organic waste recycling power plant with plasma gasification method
CONTACTS: Moscow, +7 (495) 662-47-34, www.plasmahit.ru, info@plasmahit.ru
THE ESSENCE OF INNOVATION• Use of low temperature plasma in the process of
gasification of solid household waste• Considerable increase of solid waste recycling
temperature by adding extra plasma energy, which results in the process acceleration
• The share of ballast additives decreases in the resulting gas, and the share of heat valuable components increases to provide high efficiency generation
COMPETITIVE ADVANTAGES• Two times less CAPEX per ton of recycling
capacity• Generates 20-30% more electric power per ton of
recycled solid wastes• Extra thermal energy is generated
PROJECT PRODUCTPilot power plants
CURRENT PROJECT STAGEPrototype developed
KEY MARKETSDistributed power generation
PROJECT NEEDS• Strategic partner• Pilot implementation sites for prototypes
Plasma chemical Technologies LLC
ОТХОДЫ
ВОЗДУХ
ВОЗДУХ
ВОЗДУХ
ВОЗДУХ
ВОЗДУХ/ПАР
ПРОДУКТ-ГАЗ
ШЛАК
ВОДА
ВОДА
ВОДА
ЩЁЛОЧЬ
ВАТМОСФЕРУ
1 3 5 6 7
4
2
1 – Reactor-gasifiier 2 – Plasma generator, 50 kW 3 - Afterburner 4 – Plasma generator, 10 kW
5 – Spray-type scrubber 6 – Packed scrubber 7 – Exhaust fan
Energy generation
Innovative small and medium sized wind generators on the basis of axis turbine, guide unit and irregular shape deflector
CONTACTS: Saint Petersburg www.optiflame-spb.ru, info@optiflame-spb.ru
THE ESSENCE OF INNOVATIONNew aerodynamic model of wind generator that combines both safety and increase efficiency
COMPETITIVE ADVANTAGES• Efficiency factor of the developed wind generator
is 50-60%• External guiding unit ensures extra safety and
increase of efficiency factor• Small size and weight of blades, direct gearing
to the generator, air tightness of the structure provide for simplicity and dependability of the system
• Safe use at the rooftops
PROJECT PRODUCT• Licensing of production technology• Production of wind-generatios
CURRENT PROJECT STAGETest prototype was constructed
KEY MARKETS• Distributed clean power generation• Off-grid regions of South-Eastern Asia,
Russia, etc.
PROJECT NEEDS• Strategic investor• Production partner
Optiflame Solutions LLC
Energy generation
Photovoltaic cells with increased efficiency based on self-organized quantum dots
CONTACTS: St. Petersburg, Alexey Nadtochy, +7 (921 )903-61-09, al.nadtochy@mail.ioffe.ru
THE ESSENCE OF INNOVATION• Development of multijunction solar cell using the
InGaAs/GaAs quantum dots (QD) inserted in one of its subcells
• The use of QDs provides more effective match of the subcells absorption spectra for given system of materials and allows to increase their efficiency
• Insertion of InGaAs based QDs in GaAs subcell results in the increase of the spectral range of sensitivity for this subcell up to 1.35 μm
COMPETITIVE ADVANTAGES• Increase efficiency of PV up to 3-4%• Decrease PV energy for energy consumers to 2,2
RUB per kWh• Lower weight of PV cells
PROJECT PRODUCT• Licensing of created intellectual property• SPVs for solar cells production with industrial
partner
CURRENT PROJECT STAGE Lab prototype developed: unijunction GaAs solar cell with QD array
FINISHED PRODUCT AVAILABILITYMultijunction solar cells manufacturing technology with increased efficiency – Q2 2013
KEY MARKETS• Distributed clean power generation in Russia,
Spain, Germany and other countries• Power generation for space crafts
INTELLECTUAL PROPERTY• QD high density array organization technology• Design of solar panels based on PV cells with QD
array
PROJECT NEEDS• Strategic partner in 2013• Pilot implementation sites for prototype models
Solar Dots LLC
GaInP subcell
GaAs subcell
Tunnel diod
Array of quantum dots
Ge subcell in substrate
Tunnel diod
Energy generation
Wind electricity-generating machine with directional flow wind turbine using low-speed innovative power generator
CONTACTS: Dolgoprudniy, Moscow Region +7 (495) 408-21-83, www.ifmagma.ru, info@ifmagma.ru
THE ESSENCE OF INNOVATION• Design of the wind machine with directional flow
wind turbine provides increase in wind flow power generation
• Developed and patented low-speed power generator design that is simple and robust
COMPETITIVE ADVANTAGES• Two times shorter and lighter blades compared to
traditional fans• Estimated air stream usage coefficient is 40-60%• Wind turbine can function at air stream speed up
to 60 km/h• Efficiency of the generator is up to 94% in a wide
range of rotation frequencies and load rates• The land area for the wind farm (including the
security zone) will be almost 10 times smaller than that of traditional wind farms
PROJECT PRODUCTLicensing of production technology
CURRENT PROJECT STAGEPrototype development
KEY MARKETSDistributed clean power generation
PROJECT NEEDS• Strategic investor• Pilot implementation sites for prototypes
Magma Innovation Firm LLC
Energy generation
CONTACTS: 5 Leningradskoye Highway, Moscow, Russia, 125080 +7 (499) 158-46-51, +7 (495) 789-59-58,ingpro@mail.ru
Flameless combustion technology use in infrared heaters
THE ESSENCE OF INNOVATION• New chemical composition: design and
technology for production of ceramic nozzles for boilers
• New technical solutions to ensure the even distribution of the thermal fields
• Effective use of different fuel types (natural gas, associated gas and liquefied, synthesis gas, biogas, hydrogen)
COMPETITIVE ADVANTAGES• Substantial decrease of negative environmental
impact (сontent in the product of combustion – NO < 40 mg/m3 and CO2 < 50 mg/m3 with the excess air coefficient close to 1)
• Reduction of the fuel consumption due to the decrease of heat losses and precise setting of temperature gradient
• Extension of heat exchange equipment service life due to uniform distribution of heat fields and elimination of heat-stressed areas
• Simple technological design, low production cost CURRENT PROJECT STAGELaboratory prototype developed
FINISHED PRODUCT AVAILABILITY Q4 quarter 2014
PROJECT NEEDS• Strategic partners • Financing
Russkiye Kotly LLC
Energy generation
Asymmetrical electrochemical capacitors with water electrolytes and energy storage system based on such capacitors
ELTON CJSC
CONTACTS: Troitsk, Moscow Region +7 (4967) 51-04-57, www.elton-cap.ru, v.protsenko@elton-cap.ru
THE ESSENCE OF INNOVATION• High-power Ni-C pulse capacitors• High-capacity Pb-C capacitors
COMPETITIVE ADVANTAGESHigh-power Ni-C capacitors:• High density of energy• Operating temperatures from -50 to +65ºC• No toxic materialsHigh-capacity HES-capacitors: • The number of charge-discharge cycles is times
greater than for other modern batteries • Energy density is comparable to those for
batteries (~40 W∙h/kg)• Are capable to compensate short failures of up
to 1 min in the power supply systems (95% of failures)
PROJECT PRODUCT• Energy storage systems • Licensing of capacitor manufacturing technologies
CURRENT PROJECT STAGE Prototype development and testing
FINISHED PRODUCT AVAILABILITYQ3 2013
KEY MARKETS• Reliable start for trucks and buses: start-stop
systems, recuperation systems• Energy accumulation in the power supply systems
for compensation of misbalances, increasing the reliability of renewable energy generators
INTELLECTUAL PROPERTY• Ni-C capacitor technology • Pb-C capacitor technology
PROJECT NEEDSFeedback from prospective customers to define specific requirements for storage systems
PROJECT FINANCINGSkolkovo grant – RUB 251 million
Energy accumulation
Innovative energy-efficient shunting locomotive SinaraHybrid with a smart asynchronous hybrid drive
STM Innovation Development Center LLC
CONTACTS: Moscow- Yekaterinburg– Lyudinovo; +7 (343) 310-33-00 eZubikhinAV@sinara-group.com
THE ESSENCE OF INNOVATION• Asynchronous hybrid motive power with IGBT
invertors, Li-ion batteries and ultracapacitor• Microprocessor-based locomotive energy control
system was developed• GPS-GLONASS-based track prediction system• Innovative design of rolling bearings• More than 20 novel technical solutions
COMPETITIVE ADVANTAGES• Fuel consumption in shunting operations reduced
by up to 30% • Exhaust emission reduced by up to 55%• Life-time use cost is lower by 18% • Locomotive may be used in closed workshops
PROJECT PRODUCT • Certified pilot model • Sale of manufacturing licenses
CURRENT PROJECT STAGE• Prototype developed • Pilot model tests started
FINISHED PRODUCT AVAILABILITY Certification to start from Q4 2012
KEY MARKETSJSC Russian Railways – 10.5 thousand locosIndustrial enterprises – 7 k - 8 thousand locos
INTELLECTUAL PROPERTY • Three patents for utility model • Patent for industrial model • Patent search is being conducted in the CIS, East
European countries and the United States
PROJECT NEEDS Access to foreign markets
PROJECT FINANCING• Skolkovo grant – RUB 56 million• Co-investor – RUB 60 million
Energy accumulation
Asymmetrical graphene ultracapacitor based on non-water electrolyte with enhanced energy density that is 4-6 times higher than that of analogues
CONTACTS: Moscow, +7 (495) 939-71-93, goldberg@sky.chph.ras.ru
THE ESSENCE OF INNOVATION• Highly-porous carbons are the most promising
materials for electrodes of energy storage devices• Authors have know-how for cheap production of
graphene• Use of a non-water electrolyte will make it
possible to increase electrode voltage from 2 to 4-5 V, and store 4-6 times more energy proportionately to squared voltage value
• Electrolyte production technology based on polymerized nanoparticles with ionic and electronic conduction
COMPETITIVE ADVANTAGES • Power density from 50 kW/kg, energy density
50 -100 W∙h/kg, which is comparable to modern batteries
• Several minutes needed for charging• Service life is 10 times longer than that of lithium-
ion batteries
PROJECT PRODUCTLicensing of supercapacitor production technology for various applications
CURRENT PROJECT STAGEModel of symmetrical graphene/graphene ultracapacitor based on water electrolyte was created, with energy density of 17 W∙h/kg, power density of 2 kW/h
FINISHED PRODUCT AVAILABILITY• Prototype with non-water electrolyte 25-30 W∙h/
kg – Q1 2013• Ultracapacitor cells 50 W∙h/kg, 5 kW/kg – Q4 2014
KEY MARKETS• Energy storage system for electric vehicles• Large energy storage systems for electric grids• Energy storage devices for renewable energy
sources
INTELLECTUAL PROPERTY• Graphene production know-how• Electrolyte production know-how
PROJECT NEEDSStrategic partner and investor
Kongran LLC
Kongran
Energy den
sity, W
h/kg
Power den
sity, kW/kg
Energy accumulation
Power and pulse acid ultracapacitors with high performance that utile nanomaterials, efficient designs and advanced technologies
CONTACTS: Korolev, Moscow Region, +7 (495) 974-98-58, www.teemp.ru, info@teemp.ru
THE ESSENCE OF INNOVATION• Development of advanced acid ultracapacitors
(UC) of following types: – High-capacity (for energy sector) – High-power pulse (for electric vehicles)
• Development of nanoporous activated carbon materials for electrodes, with pores sized to increase specific internal surface area up to 1.5 times and highly efficient double electric layer
• Use of composite materials for electrodes and current collectors
• Electrodes combined with current collectors to reduce weight and resistance
COMPETITIVE ADVANTAGES• High-capacity UC: power density 1 kW/kg and
energy density 23 W∙h/kg at cost of $1 per Wh• High-power pulse UC: power density 5 kW/kg,
energy density 3.5 W∙h/kg at cost of $20 per Wh• These parameters will provide the solutions for
accumulation in grids and hybrids
PROJECT PRODUCT• Prototype supercapacitor cells and modules • Supercapacitor manufacturing technology
CURRENT PROJECT STAGE• Successful experience with the development
of previous generation ultracapacitors (energy density 15.4 W∙h/kg) and their use for electric vehicles
• Materials and electrodes are being developed• Development of cells was started
FINISHED PRODUCT AVAILABILITY• Prototype ultracapacitor cells – Q4 2012• Power ultracapacitor modules – Q4 2013• Pulse ultracapacitor modules – Q4 2013
KEY MARKETS• Energy storage systems for electric vehicles • Large energy storage system in electric grids• Energy storage system for renewable energy
sources
INTELLECTUAL PROPERTY7 patent applications are expected to be filed with respect to materials and design of supercapacitors
PROJECT NEEDS• Pilot implementation sites for testing prototype
models in the energy sector• Consumers of supercapacitors in automotive
industry
PROJECT FINANCINGSkolkovo Grant – RUB 46.5 million
TEEMP LLC
Energy accumulation
Basic technology and design for the creation of lithium-air rechargeable chemical capacitors with energy density exceeding 1 kW∙h per 1 kg of battery weight for mobile applications and electric vehicles
CONTACTS: Moscow, Zelenograd, +7 (499) 732-93-38, d.shabratov@fmlab.ru
THE ESSENCE OF INNOVATIONUnlike today’s most popular lithium-ion batter-ies, lithium-air batteries are based on reduction of atmospheric oxygen at the cathode
COMPETITIVE ADVANTAGES• Extremely high capacity of lithium-air batteries:
at least 5 times greater than that of lithium-ion batteries
• Theoretical estimations of energy density of lithium-air batteries are comparable to energy content of gasoline (approximately 10 kW∙h/kg)
• Unlimited reserves of oxidizer (atmospheric oxygen)
PROJECT PRODUCT• Target parameters per 1 kg of battery weight:
– Energy density: 1-3 kW∙h – Power density: 1.5 kW
• Life cycle: not less than 100 charge-discharge cycles
CURRENT PROJECT STAGEDevelopment and testing of prototype cells
FINISHED PRODUCT AVAILABILITY • Prototype small-sized cells – Q3 2012• Industrial model of batteries – 2013-2014
KEY MARKETS• Sales of lithium-air batteries are expected to triple
by 2020 to $30 billion, which is connected first of all with the growth of electric vehicle and energy markets.
• Forecasted growth is impossible without a drastic increase of energy density of batteries used and/or decrease of their prices
PROJECT NEEDSStrategic partner and investor for production and implementation
PROJECT FINANCING• Skolkovo grant – RUB 30 million• Co-investor – RUB 10 million
FM Lab LLC
electrons
load
Lithium anode
Separator
Electrolyte
Porous cathode
Pos. electrode
Neg. electrode
Membrane from porous fluoroplas=c
Body of anode chamber filled with electrolyte
Gas-‐=ght plate of solid electrolyte
Energy accumulation
New generation of contactless switches and current limiters for electric grids and for application in housing and utilities sector
CONTACTS: Troitsk, Moscow Region +7 (916) 601-12-64, serleb@yandex.ua
THE ESSENCE OF INNOVATION• Contactless switches and current limiters (CSCL)
based on 1 μm thin nanostructured carbon films applied on quartz substrate
• If critical current is exceeded, transition from metallic state to isolator occurs within ~0.1 millisecond
• Devices for 100A, 1000A electric distribution grids housing and utilities applications up to 63A are developed
COMPETITIVE ADVANTAGES• Significantly faster than inertia switches• Enhanced efficiency and reduced losses caused
by heating of elements• Cost similar to inertia switches and dozens of
times lower than that of superconducting current limiters
• No mechanical contacts or switches prevent voltaic arc or bounce, thus increasing fire safety and interference protection
PROJECT PRODUCT• Prototype CSCL for household consumers (up to
100 A) and grid companies (1000 A) • Licensable CSCL production technology
CURRENT PROJECT STAGELaboratory sample of CSCL with critical current of 1A was developed
FINISHED PRODUCT AVAILABILITY • Prototype household devices – Q4 2013 • Prototype grid devices – Q1 2014
KEY MARKETS• Switches for household use, housing and utilities
sector • Current limiters, instead of high-T ceramic
superconductors for grid companies, housing and utilities sector
NTELLECTUAL PROPERTY Patents for technology of production of contactless current limiters and their incorporation in an electric circuit are received
PROJECT NEEDS• Strategic partner and investor • Pilot implementation sites for prototype models,
starting from 2014• Testing and certification site
Current Limited LLC
Energy transmission
Technology for power cables protection with quasi-crystalline Al-Cu-Fe coating for enhanced icing and corrosion resistance
Center of Micromechanics and Modern Materials LLC
CONTACTS: Moscow, +7 (916) 110-13-56, solyaev@bk.ru
THE ESSENCE OF INNOVATION• Use of Al-CU-Fe quasi-crystals for creating a
protective film of 20 μm thick on the surface of non-insulated cables
• Development of technology for continuous manufacture of cable with a stable coating of predetermined thickness
COMPETITIVE ADVANTAGES• Enhanced performance of non-insulated class A
and AS cables: – Protection of icing due reduced wettability
– Corrosion resistance due to protective properties of coating
• Grid operating costs reduced by up to 50% without modifications to cable laying technology
• Cable production cost increased by 5%
PROJECT PRODUCTTechnology for applying continuous quasi-crystal coating during production of cables
CURRENT PROJECT STAGE• Quasi-crystal material production technology is
developed• Preliminary prove that quasi-crystal coating
reduces friction coefficient and wetting
FINISHED PRODUCT AVAILABILITY Q2 2013
KEY MARKETSSections of power transmission lines subject to icing, territory with winter temperatures about 0ºC
INTELLECTUAL PROPERTYIt is expected to file not less than 2 patent applications for protective quasi-crystal cable coating and a coating application device
PROJECT NEEDS• Strategic partner and investor• Pilot implementation sites for prototypes, starting
from 2013
REQUIRED FINANCING Development of technology for continuous application of quasi-crystal coating during production of cables: RUB 18.4 million
Energy transmission
The high-performance cable for energy distribution with a nanocomposite core from basalt and glass fiber
CONTACTS: Cheboksary, +7 (8352) 30-82-10, o.vasilyeva@galen.su
THE ESSENCE OF INNOVATION• New type of polymeric binding, nanocomposite
materials for core • Use of nanotechnology will make it possible to
use available raw materials (basalt and glass fiber instead of expensive carbon fiber) as a basis
• Development of a new type of loom for increasing electrical conductivity and performance in extreme conditions
COMPETITIVE ADVANTAGES• Energy losses reduced by 30-40% comparing to
the steel and aluminium cables – lower heating intensity, cable has reduced heat radiation
• Possibility to use lower power transition line supports with increased span
• Cable costs $2500/tons, which is 2-2.5 times lower than analogues ACCC (U.S.)
PROJECT PRODUCT• Core production technology• Wire production technology
CURRENT PROJECT STAGE • Basic R&D completed with Karpov Institute of
Physical Chemistry• Cooperation with Research Institute of Cable
Industry, Top Glass S.p.A., GEMA, Galen, Karpov Institute of Physical Chemistry
FINISHED PRODUCT AVAILABILITY Q3 2013
KEY MARKETS• Russian and foreign grid companies• Distribution and grid facilities
INTELLECTUAL PROPERTYMore than 3 patent applications for core production technology and design of a cable with a composite core will be filed
PROJECT NEEDS• Strategic partner for production and
implementation• Pilot implementation sites for prototypes, starting
from 2013
Composite Electro LLC
Energy transmission
Environmentally friendly plasma-pulse technology for increasing oil and gas recovery at horizontal oil and gas (shale) wells
CONTACTS: BP “Rumyantsevo”, Kievskoe Shosse, Moscow +7 (495) 225-62-40, info@novas-energy.ru
THE ESSENCE OF INNOVATION • Technology for plasma-pulse treatment of mature
vertical wells have been developed and proven efficient
• A few hundreds of powerful discharges are made along the well production interval with the dense plasma generation.
• Elastic waves clean the bottomhole zone and spread deep into the formation thus cleaning perforation intervals
COMPETITIVE ADVANTAGES• Efficient, simple bottomhole treatment• Safe work under close aquifer bedding • High-accuracy selective impact • Complete environmental safety• Possibility of repeated use
PROJECT PRODUCTWell treatment service or licensing
CURRENT PROJECT STAGE• Technology for vertical wells is already available • Technology for horizontal wells is being developed
KEY MARKETS:All kinds of vertical and horizontal wells (including mature)
PROJECT NEEDS• Strategic investor• Testing site
NOVAS Sk LLC
Example of application
Treatment
January February March April May June July August September
Qoil, t/day Water cut, % Qliquid, m3
Oil and gas – upstream
High-precision monitoring system for hydraulic seam fracturing that uses seismic arrays observations on the surface
CONTACTS: Moscow, pr. Vernadskogo, 101 str. 1, office #303 +7 (495) 434-36-38
THE ESSENCE OF INNOVATION• Monitoring system uses data from the seismic
sensors deployed on the surface immediately above the injection well
• The developed technology allows to detect, locate and interpret microseismic events and their attributes even if the characteristic signal on the surface is completely masked by natural and technogenic noise
COMPETITIVE ADVANTAGES• Substantial decrease of the monitoring cost and
increase of the monitoring coverage comparing with the borehole monitoring
• Technology overcomes the existing surface monitoring methods’ disadvantages (suppression of man-made noise, location and characterization of complex sources)
PROJECT PRODUCTService for monitoring genesis and development of fracturing during hydraulic stimulation of oil and gas recovery
CURRENT PROJECT STAGEProduct Development (Mathematical algorithms are substantially developed and tested based on the data from the frac sites in Russia, USA and Canada)
KEY MARKETSUSA (more than 20 000 fracs per year), Europe, China, Russia
PROJECT NEEDS• Investments• Test sites
SYNAPSE LTD
Number of seismic sensors can be dramatically reduced and accuracy of monitoring enhanced due to implementation of the technology The example of source recovery from noise in data processing stages 1 to 4
Precise location of complex source
Complex sources generate errors
while implementing traditional surface
monitoring methods
High level of seismic noise
during hydrofrac
production
Oil and gas – upstream
Software for online modeling and visualization of oil fields
CONTACTS: 47, Nakhimovskiy prospekt, Moscow, Russia +7 (499) 129-35-00, support@rfdyn.ru
THE ESSENCE OF INNOVATION• Fully interactive visualization allows for online
monitoring and modeling at runtime• The software uses supercomputer cluster
technologies and most up-to-date architecture• Powerful numerical algorithms
COMPETITIVE ADVANTAGES• Full runtime interactivity on the field model• Easy integration to intellectual field systems• Unique tools for the modeling
PROJECT PRODUCTInteractive petroleum reservoir simulator tNavigator
CURRENT PROJECT STAGE• Commercialization• Key customers: TNK-BP, GAZPROM NEFT,
ROSNEFT, GAZPROM, NOVATEK, SINOPEC (China), PIONEER NATURAL RESOURCES (USA)
• Company offices in Moscow and Houston (USA)
KEY MARKETSMajor regions of petroleum development worldwide
PROJECT NEEDSNew clients
PROJECT FINANCING• Skolkovo grant – $1 million• Intel Capital Finance
Rock Flow Dynamics LLC
Oil and gas – upstream
Submersible electric plunger pump with linear motor, submersible converter and single power line
CONTACTS: Konstantin Skitkin, +7 (926) 277-01-93, skitsun@yandex.ru
THE ESSENCE OF INNOVATIONCombination of plunger pump with linear motor and submersible converter
COMPETITIVE ADVANTAGES• Increase of the time between repairs
by at least 10% • At least 1.5-2.2 times increase in efficiency
compared to existing models• Decrease of the service cost by at least 10%
CURRENT PROJECT STAGEPrototype pump development
FINISHED PRODUCT AVAILABILITYQ3 2014
KEY MARKETS• Russia: Volga Region and Western Siberia • CIS: Kazakhstan• Non-CIS countries: the USA and North Africa
countries
INTELLECTUAL PROPERTY• Active part of submersible linear electric motor• Hydraulic protection of the electric motor• Submersible inverter• Original functional diagram of the plant
PROJECT NEEDSInvestments – USD 1 million
NGKT LLC
Oil and gas – upstream
0.0
10.0
20.0
30.0
40.0
50.0
60.0
Общий расчетный КПД
55,9 %
36,5 % 25,7 %
Coefficient of efficiency
Operational benefit - coefficient of efficiency = 55.9%
УЭПН УШГН УЭЦН
$229 млн./год
$495 млн./год
$192 млн./год
Economic effect- $912 mln/year
Снижение стоимости ремонта скважин
Снижение стоимости капиталовложений
Увеличение наработки на отказ
mln/year mln/year
mln/year
Decrease of the well repair costs Decrease of the capital investments Increase of the time between failures
Electric submersible pump plant Bo4om-‐hole pump plant Electric centrifugal pump plant
Total design coefficient of efficiency
Thermal gas method of development of the oil-and-kerogen bear-ing deposits of Bazhen (reserves estimated at 30-40 billion tons)
CONTACTS: info@ritek.ru
THE ESSENCE OF INNOVATION• The proposed thermal gas method is intended for
efficient oil and gas resources recovery out of the rocks of Bazhen
• Oil recovery from the drained zones increases from 3-5% to 50-60% and more due to the in-site generation of efficient displacement miscible gas agent
COMPETITIVE ADVANTAGES• Availability of working agents and low cost• Use of the natural power engineering, in
particular, of increased formation temperature (above 60-65 °С) assures the spontaneous initiation of intra-formational oxidative processes and integration of the thermal and gas treatment
PROJECT PRODUCTInnovative technological complex for development of nonstandard oil-and kerogen bearing deposits
CURRENT PROJECT STAGETechnology development
FINISHED PRODUCT AVAILABILITY2015
KEY MARKETS• Bazhen deposits in Russia – 30-40 billion tons• Tight oils in America and Europe
RITEK Innovation Center
Injec&on well Air injec&on compressor
Oil gathering and treatment Produc&on well
Zone of intra-‐forma&onal oxida&ve processes Heat penetra&on zone Miscible displacement
zone
Fracturing
Air-‐and-‐water mixture
Addi&onal oil inrush from matrix
Matrix (non-‐drained zone)
Drained zone
Oil and gas – upstream
Mini-GTL for processing associated gases into synthetic oil
CONTACTS: Building 3, 7 Znamenka st., Moscow; d.Pchelintsev@ngt-m.Ru
THE ESSENCE OF INNOVATION• New partial oxidation reactor and a catalyst• Microchannel reactor and Fischer-Tropsch catalyst
(Oxford Catalysts)• Marketable product suitable for transportation
jointly with mineral oil
COMPETITIVE ADVANTAGES** Comparison with existing technologies
– 8х CAPEX decrease– 2х OPEX decrease– 10х specific capacity growth• Profitable mini-GTL plant (with 50 million
nm3/year capacity) at small scale deposits
PROJECT PRODUCT• Mini-GTL plants• IP licensing
CURRENT PROJECT STAGE“Mini-GTL-10” pilot plant construction stage with 10 million cubic meter/year capacity
FINISHED PRODUCT AVAILABILITY4Q 2014
KEY MARKETS• Small scale remote deposits:
– Key segment in Russia - > USD 5 billion – Russia in total – > USD 10 billion – Global market – > USD 20 billion
PROJECT NEEDS• Investments - USD 12 million• Pilot site
PROJECT FINANCING**:Skolkovo grant – USD 5 million
FINANCING REQUIREDPrivate investments – USD 12 millin
**Grant Agreement has been signed with Skolkovo, and Financing Agreement has been signed with RUSNANO.
Gazokhim Techno LLC
Oil and gas – downstream and transportation
Plasma arc technology for stripping the main pipelines
CONTACTS: www.petroplasma.net
THE ESSENCE OF INNOVATION• Arc stripping of metal surfaces with plasma
allows for efficient and complete removal of any contaminations
• The proposed technology can replace existing mechanical methods (shot blasting, brushing, manual cleaning)
COMPETITIVE ADVANTAGES• The quality of the surface pretreatment before
applying polymeric coating • Increased coating adhesion • Pipes service life increase
PROJECT PRODUCTTool for plasma arc stripping
CURRENT PROJECT STAGEPrototype development
FINISHED PRODUCT AVAILABILITY2014
KEY MARKETSPipe surface stripping for the main pipelines during overhaul at initial pipeline production and after installation
PROJECT NEEDS• Investments• Testing site
Petroplasma LLC
Oil and gas – downstream and transportation
Combination of catalytic processes and rectification in a single unit for production of EURO-5, MSAT-2 gasoline components
CONTACTS: www.globalrrt.com, info@globalrrt.com
THE ESSENCE OF INNOVATION• Combination of catalytic and separating systems
in the single device• Combination of three processes:
– Isomerization reactor – Hydro-izomerisation reactor – Rectification system
COMPETITIVE ADVANTAGES• 5x decrease of the operating costs for gasoline
manufacture • 3x CAPEX decrease • Compliance with EURO-5, MSAT-2 standards
PROJECT PRODUCT• Production plants engineering• Licensing
CURRENT PROJECT STAGEPilot plant under construction (tests start October 2012)
FINISHED PRODUCT AVAILABILITYQ4 quarter of 2012
KEY MARKETSRussia, India, China will increase the capacities for top-quality fuel manufacturing in the nearest future
PROJECT NEEDS• Strategic partner• Site for approbation • Access to customers
RRT LLC
= Standard technology PRIS
Oil and gas – downstream and transportation
Supersonic gas separation technology (3S-technology)
CONTACTS: engo@orc.ru
THE ESSENCE OF INNOVATION• Application of new high-performance devices
(3S-separators) and technological schemes (based on 3S-separators) for usage in oil and gas industry
• Development of 3S-technology in relation to CO2 and H2S separation and liquefaction of ethane and methane
COMPETITIVE ADVANTAGES• Power efficient• Small size• Low capital and operating costs• The absence of moving parts• No need for frequent maintenance• Increase of liquid products separation rate
PROJECT PRODUCTFacilities for gas conditioning and processing (for gas and oil fields and gas plants)
CURRENT PROJECT STAGECommercialization
INTELLECTUAL PROPERTY• More than 40 international patents and patent
applications• 9 Russian patents
KEY MARKETSWorld market of gas conditioning systems at gas and oil fields
PROJECT NEEDSNew Clients
ENGO Engineering Ltd.
3S-‐сепараторы на Губкинском ГКМ и месторождении Talimi (Китай)
3S-separators at Gubkinsky GKM and Talimu field (China)
Oil and gas – downstream and transportation
Tool for the remote detection of the pipelines deficiencies based on the magnetoresistive nanostructures
CONTACTS: Saint-Petersburg, Ligovsky pr., 254, www.polyinform
THE ESSENCE OF INNOVATION• Technical solution using three-component sensors
based on magnetic nano-films • Gradientomerty method realized in the system
provides for the decisive advantage in the accuracy of pipelines magnetic anomalies detection
• Software allows on-line processing and visualization of the defects magnetograms
COMPETITIVE ADVANTAGE• Remote detection and classification of defects
during the normal operating mode of a pipeline • Detection accuracy - 90 % • Defectoscopy of the parts that are unreachable for
the usual diagnostics methods
PROJECT PRODUCTMagnetometric system combining hardware and software
CURRENT PROJECT STAGEExperimental industrial model for the diagnosis of underground pipelines was created
FINISHED PRODUCT AVAILABILITY• 2012 - for underground pipelines• 2013 - for underwater pipelines
PROJECTS NEEDS• Investments• The site for R&D and production
CTI LLC
Oil and gas – downstream and transportation
Microchip for wireless smart metering systems
CONTACTS: Moscow, CEO: Alexander Buhman, sasha@mobix.com
THE ESSENCE OF INNOVATION Application specific integrated circuit (ASIC) allows to combine data transmission by radio channel and regular electric power lines (PLC-channel). This decreases the costs of smart metering system deployment and considerable increases reliability of data transmission.
COMPETITIVE ADVANTAGES• 3D mesh network guarantees the reliable data
transfer• Can be used for electricity, gas, water and heat
meters.• Unique hardware configuration allows to install on
the existing metering systems• Allows managing energy supply to the consumer
FINISHED PRODUCT AVAILABILITYQ4 of 2013
KEY MARKETS • Manufacturers of metering devices• The market in Russia amounts to ~ 20 millions
meters/year, which equals ~ RUR 60 billion /year
PROJECT NEEDSStrategic partners
PROJECT FINANCING• RUR 61,7 million – Skolkovo grand • RUR 61,7 million – own funds
‘Mobix Chip’ LLC
Housing and utilities solutions
Heating pipelines maintenance by flushing with special reagents
CONTACTS: s-avant.ru, +7 (495) 984 80 64 CEO: Anna Bleyer
THE ESSENCE OF INNOVATION• The surface-active substance (SAS) is used for
contamination removal from and subsequent protection of the inner surfaces of the heating pipes.
• Economically efficient technology for the use in apartment buildings and other real estate objects
COMPETITIVE ADVANTAGES• Decreases hydraulic resistance in the pipes by
30% due to the solid hydrophobic film that is created on the pipe walls
• Decreases losses of heating-carrier from 10 to 30%
• Lowers costs of maintenance and capital repairs as the cleaning effect lasts for at least three heating seasons
• The technology could be used during whole year
PROJECT PRODUCTInnovative reagent and the technology of its use
CURRENT PROJECT STAGEReagent development is almost completed, primary testing is on-going
FINISHED PRODUCT AVAILABILITY Q3 quarter 2013
KEY MARKETSCompanies operating heating networks
PROJECT NEEDS• Testing site• Strategic partners
PROJECT FINANCING• RUB 21,7 million – Skolkovo• RUB 7,5 million – own funds
SAVANT Research and Development
Housing and utilities solutions
Heating pipeline internal inspection systems with remote control
CONTACTS: Saint Petersburg, www.gazproekt.spb.ruCEO: Belyaev Alexander, belayev@diakont.com
THE ESSENCE OF INNOVATION • Revolutionary method of non-destructive control -
thickness gauging based on the dynamic skin-layer effect
• Electromagnetic and acoustic methods adjusted for the specific conditions of heating systems.
COMPETITIVE ADVANTAGES• In-line inspection is 7,5 times cheaper than the
inspection of the pipeline exposed to the surface because stripping works are not needed.
• The tool will identify the following defects: faulty fusions, undercutting, internal and external corrosion (including pitting), erosive wear of pipeline components, metal scaling in the pipe body.
PROJECT PRODUCTRobotized tool with remote control that can operate inside of the underground heating pipelines with the diameter 700-1200 mm
FINISHED PRODUCT AVAILABILITYQ3 of 2013
PROJECT NEEDS Testing sites
PROJECT FINANCING• RUR 27,8 million – Skolkovo • RUR 27,8 million – own funds
‘GAZPROECT – DIAGNIOSTIKA, LLC
Energy Efficiency Technologies Cluster – Skolkovo Foundation
4
30
In-‐line inspec+on (ILI)
The diagnos+c study including the cost of the
pipeline stripping.
The cost of diagnos+c for 1 km of hea+ng systems’ pipelines with the diameter
1000, RUR million
7
42
Repairs following the results of ILI
(replacement of specific defec+ve sec+ons)
Repairs without ILI (total replacement)
The average cost of repairs of 1 km for hea+ng systems pipelines with the
diameter 1000, RUR million
Housing and utilities solutions
Energy saving heater made of polymer
CONTACTS: Vladimir Bosnik, Bosnik@systemheat.ru, + 7 (917) 502-43-20
THE ESSENCE OF INNOVATION• Radiator has two autonomous contours, while
traditionally there is only one• Radiator is made of thermostatic polymer
COMPETITIVE ADVANTAGES• Saving of up to 40% of the heating energy• Reliable, resistant to corrosion, has extended
service life. • Production cost is several times lower than for
traditional heaters.
PROJECT PRODUCTThermostatic polymer radiator for the use in central heating systems
CURRENT PROJECT STAGE R&D is completed, prototypes were produced
FINISHED PRODUCT AVAILABILITYEnd of 2013
KEY MARKETS• Households• Building and development companies• Managing companies
PROJECT NEEDS• Premises for pilot production• Testing site
«SYSTEM HEAT»
Housing and utilities solutions
CONTACTS: +7 (499) 502-13-14, mail@qmodule.ru, www.qmodule.ruCEO: Martyn Nunuparov
THE ESSENCE OF INNOVATION• An efficient method of energy transformation
from mechanical pressure to electric energy for powering compact electronic devices or generating electric power
• The developed method can significantly increase the output of power generators charge (piezoelectric and radioisotopes that emit negatively charged electrons)
COMPETITIVE ADVANTAGES• The development allows creating battery-free
electronic devices for various applications • Development of electric energy generators to
accumulate electric energy from alternative sources is possible
PROJECT PRODUCT• Qconverter – ОЕМ- energy converters• Qswitch – piezoelectric transmitter for remote
control, Smart House Systems • One-cycle output energy of Qconverter –
1.25W*sec • Qconverter prime cost ~1 USD
FINISHED PRODUCT AVAILABILITYProject prototypes are available
KEY MARKETS• Industrial automation• Smart House Systems• Green electronics
PROJECT NEEDS• B2B orders• License holders• R&D co-investors
Transformation of mechanical pressure energy to electricity for the use in compact electronic devices
Qmodule Laboratory
Housing and utilities solutions
Innovative gas valve with extra-low energy consumption
CONTACTS: 4 Promyshlennaya Str., Troitsk, Moscow region 142190 Tel/Fax: +7 (495) 777-72-26, www.amtc.ru Line Director: Vladimir Sushko +7 (963) 697-56-14, sushko@amtc.org
THE ESSENCE OF INNOVATION • The use of high-energy NdFeB permanent magnet
and original engineering of electronics guarantee extra-low energy consumption
• On-bard computing facility allows to create adaptive emergency prevention systems.
COMPETITIVE ADVANTAGES• Extra-low power consumption level not exceeding
50 μA at the voltage of 3.6V• The device consumes 130,000 times less electric
power than the alternatives available in the market• With the use of 500,000 devices the annual power
saving may amount to 108,000 MW
PROJECT PRODUCTPatented electronically controlled gas shutoff valve
CURRENT PROJECT STAGE• Pilot production• All the necessary certificates and approvals for the
Russian market are available
KEY MARKETS• Gas supply control• Emergency prevention systems
PROJECT NEEDSMarket entry support
ENERGY EFFICIENT GAS VALVEAMT&C, LLC
Housing and utilities solutions
CONTACTS: Ozersk, Chelyabinsk region, tel.8 (35130) 9-47-22 termopeks@mail.ru, www:polymerpro.ru
Expandable sleeve of complex-modified polymer (smart plastic) for pipes recovery
THE ESSENCE OF INNOVATION• Polymeric sleeve that can increase its diameter
up to 200% due to molecular relaxation during repeated heating up to the plasticization temperature
• Complex-modified polymer composite resistant to mechanical and chemical impact and high temperature
COMPETITIVE ADVANTAGESThe technology allows reconstructing of damaged underground pipes using the trenchless method within the shortest period time and at minimal cost
CURRENT PROJECT STAGELaboratory prototype is developed with diametr 18 mm, leight 100 mm and magnification coefficient 1,3)
KEY MARKETSThe reconstruction is required for more than 600 000 km of pipes of various applications in Russia
• Households• Utilities companies• Oil & gas companies (at later stage of R&D)
Ural Factory of Polymer Technologies – Mayak
heating
Housing and utilities solutions
CONTACTS: 206 Tallinskoye Highway, Saint Petersburg, +7 (812) 406-80-67 www.optogan.ru, optogan.ntl@optogan.com
Low-cost, energy efficient and reliable light emitting diodes (LED), that are built using new components architecture
The company-participant is a subsidiary of «Optogan» JSC
ESSENCE OF INNOVATION• Transition from a separate light emitting diode to a
fully integrated intellectual light system (module) • LED, structure, driver, optics are on a single
substrate • Brand new class of energy efficient compact
multifunctional integrated light systems
COMPETITIVE ADVANTAGES• Integrated chip-on-board LED modules containing
emitter with primary optics allowing to generate light emission patterns of any configuration
• Integrated module light efficiency is more than 160 lm/W with the color rendering index CRI>85, light flux more than1,000 lm/cm2
• Lamp price for consumers will not exceed USD10 /klm
PROJECT NEEDSStrategic partners
PROJECT FINANCING• RUR 148,2 million – Skolkovo grand • RUR 151,8 million – own funds
Optogan. New Technologies of Light LLC
Housing and utilities solutions
CONTACTS: 206 Tallinskoye Highway, Saint Petersburg+7 (812) 406-80-67, www.optogan.ru
Organic light emitting diodes printing technology
The company-participant is a subsidiary of «Optogan» JSC
THE ESSENCE OF INNOVATIONThe use of optically active conjugated polymers and nano-composites based on polymer non-organic nanoparticles to develop organic light-emitting Diodes (OLED)
COMPETITIVE ADVANTAGES• Specifications of OLED based on multi-layered
composite structures is higher than that of polymeric-only ones due to more efficient emit-ting recombination (80 lm/Wt, brightness 3000 cd, life period not less then 10 000 hours)
• Inclusion of non-organic nanoparticles into poly-meric matrix considerably increases service life of OLED structures
• Flexible printing technology allows: – Significant decrease of production cost com-
pared to both non-organic LED and other OLED manufactured with the use of vacuum deposition technology
– Produce OLEDs with almost any width, length and shape
PROJECT NEEDSStrategic partners
PROJECT FINANCING• RUR 148,2 millions –
Skolkovo Foundation • RUR 151,8 millions – own funds
OPTOGAN – ORGANIC LIGHT SOLUTIONS LLC
Housing and utilities solutions
CLUSTER OF ENERGY EFFICIENT TECHNOLOGIESSkolkovo Foundation 12, Krasnopresnenskaya emb. Moscow, 123610Tel.: +7 495 967 01 48 Cluster-Energy@corp.i-gorod.comwww.sk.ru