Post on 20-Mar-2018
Shipboard Cable
Content
Cable Type Unarmored cables
Armoredcables
Armored & PVC Protective covered cables Page
(Rate voltage) High Voltage Power
Cable (3.6/6kV,6/10kV)
--- SPYCB, FA-SPYCB SPYCBY, FA-SPYCBY 4
--- TPYC, FA-TPYC TPYCY, FA-TPYCY 6
--- SPYC, FA-SPYC 12
21 YCYPS-AF ,YCYPS --- ---
Power & Lighting
Cable (0.6/1kV)
DPY, FA-DPY DPYC, FA-DPYC DPYCY, FA-DPYCY 13
TPY, FA-TPY TPYC, FA-TPYC TPYCY, FA-TPYCY 14
--- DPYCSLA,FA-DPYCSLA
DPYCYSLA,FA-DPYCYSLA 18
--- TPYCSLA,FA-TPYCSLA
TPYCYSLA,FA-TPYCYSLA 18
FR-DPY, FR-FA-DPY
FR-DPYC,FR-FA-DPYC
FR-DPYCY, FR-FA-DPYCY 20
FR-TPY, FR-FA-TPY
FR-TPYC,FR-FA-TPYC
FR-TPYCY, FR-FA-TPYCY 21
Control & Signal
Cable (150/250V)
MPY, FA-MPY MPYC, FA-MPYC MPYCY, FA-MPYCY 26
--- MPYCSLA,FA-MPYCSLA
MPYCYSLA,FA-MPYCYSLA 28
--- MPYC-S, FA-MPYC-S MPYCY-S, FA-MPYCY-S 28
Telephone and
InstrumentationCable
FR-MPY, FR-FA-MPY
FR-MPYC,FR-FA-MPYC
FR-MPYCY, FR-FA-MPYCY 32
TTY, FA-TTY TTYC, FA-TTYC TTYCY, FA-TTYCY 36
--- TTYCSLA,FA-TTYCSLA
TTYCYSLA,FA-TTYCYSLA 40
TTYC-SLA FA-TTYC-SLA
TTYCY-SLA FA-TTYCY-SLA 42
34 noitamrofnI lacinhceT cirtcelE
54 ETACIFITREC
Copper condutorMica tapeEPR insulation
Suitable filler
Suitable tapePVC sheathGalvanized steel wire braidPVC protective covering
Symbols explanation for ships cables accordance to JIS C3410-2010
Symbols denoting number of cores and principal use FA Flame retardant(IEC 60332-3-22) F Four core for lighting and power
FR Fire resistant(IEC 60331 1/2) M Multicore for control and signal
FR-FA Flame retardant and Fire resistant TT Telephone and instrumentation
S Single core for lighting and power P Portable or flexible
D Double core for lighting and power
T Three core for lighting and power
Symbols denoting constituentsInsulation (1) Outer covering Armouring (2) Protective covering Others
P EP
rubber
Y PVC C Galvanized steel wire
braid
Y PVC Protective
covering
-S Individual core shield with braid
Y PVC CB Copper alloy wire
braid
SLA Common shield with Aluminium
foil-mylar tape and drain wire
-SLA Individual pair shield with
Aluminium foil-mylar tape and drain wire
E Earth wire
Notes:(1) For telephone cable, the insulation symbol is omitted. (2) In the case of copper alloy wire braid, letter B shall be suffixed to letter C.
Symbols explanation example for cable type "0.6/1 kV FR-FA-TPYCY" 0.6/1 kV FR-FA-TPYCY Construction of cable (Example)
0.6/1 kV Voltage rate
FR-FA Flame retardant and Fire resistant
T Three core conductor
P EPR Insulation
Y PVC sheath
C Galvanized steel wire braid
Y PVC protective covering
1
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
3
6/10 kV FA-TPYCY
Rated Voltage 3.6/6 kV
6/10 kV
Power Cable
Cable Symbols TPYC , FA-TPYC
TPYCY, FA-TPYCY
SPYCB , SPYCB
SPYCBY, PYCBY
Application Standard Design guide JIS C 3410(2010),IEC 60092-350(2008-02), IEC 60092-351(2004-04) IEC 60092-353(2001-04), IEC 60092-354(2003-06), IEC 60092-359(1999-08)
Flame retardant IEC 60332-1& IEC 60332-3-22 Category A (FA-Type)
Max. conductor temperature 90
CONSTRUCTIONClassification Code Construction Detail
Conductor S,T Stranded tinned annealed copper wires as per JIS C 3410.
Insulation P EPR as per JIS C 3410,IEC 60092-351
Cabling Insulated conductors shall be cabled. Flame retardant & Non-hygroscopic fillers may be used. Suitable tape(s) may be applied on the cabled core.
Sheath Y PVC as per JIS C 3410,IEC 60092-353
Armor C Braid of galvanized steel wires. Coverage density is minimum 90%.
CB Braid of copper alloy wire, Coverage density is minimum 90 %. (for single core only)
Paint The white paint shall be painted uniformly on the steel wire braid Protective covering Type, paint is dispensable.
Protective Covering Y PVC as per JIS C 3410. Outer sheath color : Red
Core identification 3Cores:White, Red, Blue
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
4
TABLE 1 3.6/6 kV SPYCB 3.6/6 kV FA-SPYCB
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal wire
braid armour
Nominal overall diam.
Tolerance of diam. over sheath &
overall diam.
Cable weight
(Approx.)Size Construction O.D
SQ No./mm mm mm mm mm mm ± mm kg/km
10 7/1.35 4.05 2.5 1.3 0.3 17.6 0.7 560
16 7/1.70 5.10 2.5 1.4 0.3 18.8 0.8 660
25 7/2.14 6.42 2.5 1.4 0.3 20.1 0.8 795
35 7/2.52 7.56 2.5 1.5 0.3 21.5 0.9 940
50 19/1.78 8.90 2.5 1.5 0.3 22.8 0.9 1110
70 19/2.14 10.7 2.5 1.6 0.3 24.8 1.0 1380
95 19/2.52 12.6 2.5 1.7 0.3 26.9 1.1 1710
120 37/2.03 14.2 2.5 1.8 0.3 28.7 1.1 2010
150 37/2.25 15.8 2.5 1.8 0.3 30.3 1.2 2330
185 37/2.52 17.6 2.5 1.9 0.4 32.8 1.3 2890
240 61/2.25 20.3 2.6 2.0 0.4 35.9 1.4 3590
300 61/2.52 22.7 2.8 2.1 0.4 38.9 1.6 4330
TABLE 2 3.6/6 kV SPYCBY 3.6/6 kV FA-SPYCBY
Conductor Radial Thickness
of insulation
Radial thickness
of sheath
Diam. of metal
wire braidarmour
Radial thickness
of protective covering
Nominal overall diam.
Tolerance of diam.
over sheath & overall diam.
Cable weight
(Approx.)Size Construction O.D
SQ No./mm mm mm mm mm mm mm ± mm kg/km
10 7/1.35 4.05 2.5 1.3 0.3 1.0 19.8 0.8 640
16 7/1.70 5.10 2.5 1.4 0.3 1.1 21.2 0.8 755
25 7/2.14 6.42 2.5 1.4 0.3 1.1 22.5 0.9 895
35 7/2.52 7.56 2.5 1.5 0.3 1.1 23.9 1.0 1050
50 19/1.78 8.90 2.5 1.5 0.3 1.2 25.4 1.0 1230
70 19/2.14 10.7 2.5 1.6 0.3 1.2 27.4 1.1 1520
95 19/2.52 12.6 2.5 1.7 0.3 1.3 29.7 1.2 1870
120 37/2.03 14.2 2.5 1.8 0.3 1.3 31.5 1.3 2180
150 37/2.25 15.8 2.5 1.8 0.3 1.4 33.3 1.3 2520
185 37/2.52 17.6 2.5 1.9 0.4 1.4 35.8 1.4 3090
240 61/2.25 20.3 2.6 2.0 0.4 1.5 39.3 1.6 3830
300 61/2.52 22.7 2.8 2.1 0.4 1.6 42.5 1.6 4610
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
5
TABLE 3 6/10 kV SPYCB 6/10 kV FA-SPYCB
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Nominal overall diam.
Tolerance of diam.
over sheath & overall diam.
Cable weight (Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm ± mm kg/km
16 7/1.70 5.10 3.4 1.5 0.3 20.8 0.8 765
25 7/2.14 6.42 3.4 1.5 0.3 22.1 0.9 910
35 7/2.52 7.56 3.4 1.6 0.3 23.5 0.9 1060
50 19/1.78 8.90 3.4 1.6 0.3 24.8 1.0 1230
70 19/2.14 10.7 3.4 1.7 0.3 26.8 1.1 1510
95 19/2.52 12.6 3.4 1.8 0.3 28.9 1.2 1850
120 37/2.03 14.2 3.4 1.8 0.3 30.5 1.2 2150
150 37/2.25 15.8 3.4 1.9 0.4 32.8 1.3 2610
185 37/2.52 17.6 3.4 2.0 0.4 34.8 1.4 3060
240 61/2.25 20.3 3.4 2.1 0.4 37.7 1.5 3760
300 61/2.52 22.7 3.4 2.2 0.4 40.3 1.6 4470
TABLE 4 6/10 kV SPYCBY 6/10 kV FA-SPYCBY
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Radial thickness ofprotective covering
Nominal overall diam.
Tolerance of diam.
over sheath & overall diam.
Cable weight (Approx.)Size Construction O.D
SQ No./mm mm mm mm mm mm mm ± mm kg/km
16 7/1.70 5.10 3.4 1.5 0.3 1.1 23.2 0.9 870
25 7/2.14 6.42 3.4 1.5 0.3 1.2 24.7 1.0 1030
35 7/2.52 7.56 3.4 1.6 0.3 1.2 26.1 1.0 1190
50 19/1.78 8.90 3.4 1.6 0.3 1.2 27.4 1.1 1360
70 19/2.14 10.7 3.4 1.7 0.3 1.3 29.6 1.2 1670
95 19/2.52 12.6 3.4 1.8 0.3 1.3 31.7 1.3 2020
120 37/2.03 14.2 3.4 1.8 0.3 1.4 33.5 1.3 2340
150 37/2.25 15.8 3.4 1.9 0.4 1.4 35.8 1.4 2820
185 37/2.52 17.6 3.4 2.0 0.4 1.5 38.2 1.5 3290
240 61/2.25 20.3 3.4 2.1 0.4 1.5 41.1 1.6 4010
300 61/2.52 22.7 3.4 2.2 0.4 1.6 43.9 1.7 4760
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
6
TABLE 5 3.6/6 kV TPYC 3.6/6 kV FA-TPYC
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Nominal overall diam.
Tolerance of diam.
over sheath & overall diam.
Cable weight (Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm ± mm kg/km
10 7/1.35 4.05 2.5 1.9 0.4 34.1 1.4 1620
16 7/1.70 5.10 2.5 2.0 0.4 36.5 1.5 1920
25 7/2.14 6.42 2.5 2.1 0.4 39.6 1.6 2370
35 7/2.52 7.56 2.5 2.2 0.4 42.2 1.6 2800
50 19/1.78 8.90 2.5 2.4 0.4 45.5 1.7 3360
70 19/2.14 10.7 2.5 2.5 0.4 49.6 1.8 4210
95 19/2.52 12.6 2.5 2.7 0.4 54.1 1.9 5260
120 37/2.03 14.2 2.5 2.8 0.4 57.8 2.0 6210
150 37/2.25 15.8 2.5 2.9 0.4 61.6 2.1 7250
TABLE 6 3.6/6 kV TPYCY 3.6/6 kV FA-TPYCY
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Radial thickness
of protectivecovering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight (Approx.)Size Construction O.D
SQ No./mm mm mm mm mm mm mm ± mm kg/km
10 7/1.35 4.05 2.5 1.9 0.4 1.5 37.5 1.5 1850
16 7/1.70 5.10 2.5 2.0 0.4 1.5 39.9 1.6 2170
25 7/2.14 6.42 2.5 2.1 0.4 1.6 43.2 1.7 2650
35 7/2.52 7.56 2.5 2.2 0.4 1.7 46.0 1.7 3120
50 19/1.78 8.90 2.5 2.4 0.4 1.7 49.3 1.8 3710
70 19/2.14 10.7 2.5 2.5 0.4 1.8 53.6 1.9 4610
95 19/2.52 12.6 2.5 2.7 0.4 2.0 58.5 2.0 5740
120 37/2.03 14.2 2.5 2.8 0.4 2.0 62.2 2.1 6720
150 37/2.25 15.8 2.5 2.9 0.4 2.1 66.2 2.2 7820
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
7
TABLE 7 6/10 kV TPYC 6/10 kV FA-TPYC
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Nominal overall diam.
Tolerance of diam.
over sheath & overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm ± mm kg/km
16 7/1.70 5.10 3.4 2.2 0.4 41.0 1.6 2290
25 7/2.14 6.42 3.4 2.3 0.4 44.1 1.7 2760
35 7/2.52 7.56 3.4 2.4 0.4 46.7 1.7 3220
50 19/1.78 8.90 3.4 2.5 0.4 49.8 1.8 3780
70 19/2.14 10.7 3.4 2.7 0.4 54.1 1.9 4690
95 19/2.52 12.6 3.4 2.8 0.4 58.4 2.0 5740
120 37/2.03 14.2 3.4 3.0 0.4 62.3 2.1 6750
150 37/2.25 15.8 3.4 3.1 0.4 65.9 2.2 7790
TABLE 8 6/10 kV TPYCY 6/10 kV FA-TPYCY
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Radial thickness
of protectivecovering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm mm ± mm kg/km
16 7/1.70 5.10 3.4 2.2 0.4 1.6 44.6 1.7 2590
25 7/2.14 6.42 3.4 2.3 0.4 1.7 47.9 1.8 3100
35 7/2.52 7.56 3.4 2.4 0.4 1.8 50.7 1.8 3590
50 19/1.78 8.90 3.4 2.5 0.4 1.8 53.8 1.9 4180
70 19/2.14 10.7 3.4 2.7 0.4 2.0 58.5 2.0 5170
95 19/2.52 12.6 3.4 2.8 0.4 2.1 63.0 2.1 6290
120 37/2.03 14.2 3.4 3.0 0.4 2.2 67.1 2.2 7360
150 37/2.25 15.8 3.4 3.1 0.4 2.2 70.7 2.3 8440
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
8
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
9
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
11
0.6/1kV FA-TPYCY
Rated Voltage 0.6/1 kV
Power and Lighting Cable
Cable Symbols SPYC, FA-SPYC
SPYCY , FA-SPYCY
DPY, FA-DPY
DPYC, FA-DPYC
DPYCY, FA-DPYCY
TPY, FA-TPY
Application Standard Design guide JIS C 3410(2010),IEC 60092-350(2008-02), IEC 60092-351(2004-04),IEC 60092-353(2001-04), IEC 60092-359(1999-08)
Flame retardant IEC 60332-1& IEC 60332-3-22 Category A (FA-Type)
Max. conductor temperature 90
CONSTRUCTIONClassification Code Construction Detail
Conductor S,D,T Stranded tinned annealed copper wires as per JIS C 3410.
Insulation P EPR as per JIS C 3410,IEC 60092-351
Cabling Insulated conductors shall be cabled.
Flame retardant & Non-hygroscopic fillers may be used.
Suitable tape(s) may be applied on the cabled core.
Sheath Y PVC as per JIS C 3410,IEC 60092-353
Armor C Braid of galvanized steel wires.
Coverage density is minimum 90%.
Paint The white paint shall be painted uniformly on the steel wire braid
Protective covering Type, paint is dispensable.
Protective Covering Y PVC as per JIS C 3410.
Outer sheath color : Black
Core identification 2Cores:Black, White
3Cores:Black, White, Red
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
12
TABLE 9 0.6/1 kV SPYC 0.6/1 kV FA-SPYC
Conductor Radialthickness
ofinsulation
Radialthickness
of sheath
Nominaldiam. over
sheath
Diam. of
metalwire forbraid
Nominaloveralldiam.
Toleranceof diam. over
sheath & overall diam.
Cable weight
(Approx.)Size Construction O.D
SQ No./mm mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 1.0 1.0 5.9 0.3 7.2 0.4 100
2.5 7/0.67 2.01 1.0 1.0 6.3 0.3 7.6 0.4 120
4 7/0.85 2.55 1.0 1.0 6.9 0.3 8.2 0.4 140
6 7/1.04 3.12 1.0 1.0 7.4 0.3 8.7 0.4 170
10 7/1.35 4.05 1.0 1.1 8.6 0.3 9.9 0.4 225
16 7/1.70 5.10 1.0 1.1 9.6 0.3 10.9 0.4 300
25 7/2.14 6.42 1.2 1.2 11.5 0.3 12.8 0.5 425
35 7/2.52 7.56 1.2 1.2 12.7 0.3 14.0 0.6 535
50 19/1.78 8.90 1.4 1.3 14.6 0.3 15.9 0.6 700
70 19/2.14 10.7 1.4 1.4 16.6 0.3 17.9 0.7 940
95 19/2.52 12.6 1.6 1.5 19.3 0.3 20.6 0.8 1260
120 37/2.03 14.2 1.6 1.5 20.9 0.3 22.2 0.9 1520
150 37/2.25 15.8 1.8 1.6 23.1 0.3 24.4 1.0 1840
185 37/2.52 17.6 2.0 1.7 25.5 0.3 26.8 1.1 2260
240 61/2.25 20.3 2.2 1.8 28.8 0.3 30.1 1.2 2920
300 61/2.52 22.7 2.4 1.9 31.8 0.4 33.6 1.3 3700
TABLE 10 0.6/1 kV SPYCY 0.6/1 kV FA-SPYCY
Conductor Radial thickness
of insulation
Radial thickness
of sheath
Nominal diam. over
sheath
Diam. of
metal wire for braid
Redial thickness
of protective covering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
SQ No./mm mm mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 1.0 1.0 5.9 0.3 0.8 9.0 0.4 135
2.5 7/0.67 2.01 1.0 1.0 6.3 0.3 0.8 9.4 0.4 150
4 7/0.85 2.55 1.0 1.0 6.9 0.3 0.8 10.0 0.4 175
6 7/1.04 3.12 1.0 1.0 7.4 0.3 0.8 10.5 0.4 205
10 7/1.35 4.05 1.0 1.1 8.6 0.3 0.8 11.7 0.5 270
16 7/1.70 5.10 1.0 1.1 9.6 0.3 0.9 12.9 0.5 350
25 7/2.14 6.42 1.2 1.2 11.5 0.3 0.9 14.8 0.6 485
35 7/2.52 7.56 1.2 1.2 12.7 0.3 1.0 16.2 0.6 610
50 19/1.78 8.90 1.4 1.3 14.6 0.3 1.0 18.1 0.7 780
70 19/2.14 10.7 1.4 1.4 16.6 0.3 1.0 20.1 0.8 1030
95 19/2.52 12.6 1.6 1.5 19.3 0.3 1.1 23.0 0.9 1370
120 37/2.03 14.2 1.6 1.5 20.9 0.3 1.2 24.8 1.0 1650
150 37/2.25 15.8 1.8 1.6 23.1 0.3 1.2 27.0 1.1 1980
185 37/2.52 17.6 2.0 1.7 25.5 0.3 1.3 29.6 1.2 2430
240 61/2.25 20.3 2.2 1.8 28.8 0.3 1.4 33.1 1.3 3130
300 61/2.52 22.7 2.4 1.9 31.8 0.4 1.4 36.6 1.5 3930
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
13
TABLE 11 0.6/1 kV DPY 0.6/1 kV FA-DPY
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Nominal diam. over
sheath
Tolerance of
overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 1.0 1.1 10.4 0.5 120
2.5 7/0.67 2.01 1.0 1.2 11.5 0.5 155
4 7/0.85 2.55 1.0 1.2 12.6 0.6 200
6 7/1.04 3.12 1.0 1.3 13.9 0.6 255
10 7/1.35 4.05 1.0 1.3 15.8 0.7 360
16 7/1.70 5.10 1.0 1.4 18.1 0.8 515
25 7/2.14 6.42 1.2 1.5 21.7 0.9 770
35 7/2.52 7.56 1.2 1.6 24.2 1.0 1010
50 19/1.78 8.90 1.4 1.8 28.1 1.2 1360
70 19/2.14 10.7 1.4 1.9 31.9 1.3 1860
95 19/2.52 12.6 1.6 2.1 37.3 1.6 2550
120 37/2.03 14.2 1.6 2.3 40.9 1.6 3150
150 37/2.25 15.8 1.8 2.4 45.1 1.7 3840
185 37/2.52 17.6 2.0 2.6 49.9 1.9 4780
TABLE 12 0.6/1 kV DPYC 0.6/1 kV FA-DPYC
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Nominal overall diam.
Tolerance of diam.
over sheath & overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 1.0 1.1 0.3 11.7 0.5 205
2.5 7/0.67 2.01 1.0 1.2 0.3 12.8 0.5 250
4 7/0.85 2.55 1.0 1.2 0.3 13.9 0.6 300
6 7/1.04 3.12 1.0 1.3 0.3 15.2 0.6 370
10 7/1.35 4.05 1.0 1.3 0.3 17.1 0.7 490
16 7/1.70 5.10 1.0 1.4 0.3 19.4 0.8 600
25 7/2.14 6.42 1.2 1.5 0.3 23.0 0.9 945
35 7/2.52 7.56 1.2 1.6 0.3 25.5 1.0 1200
50 19/1.78 8.90 1.4 1.8 0.3 29.4 1.2 1580
70 19/2.14 10.7 1.4 1.9 0.4 33.7 1.3 2210
95 19/2.52 12.6 1.6 2.1 0.4 39.1 1.6 2960
120 37/2.03 14.2 1.6 2.3 0.4 42.7 1.6 3600
150 37/2.25 15.8 1.8 2.4 0.4 46.9 1.7 4340
185 37/2.52 17.6 2.0 2.6 0.4 51.7 1.9 5320
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
14
TABLE 13 0.6/1 kV DPYCY 0.6/1 kV FA-DPYCY
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Radial thickness ofprotective covering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 1.0 1.1 0.3 0.9 13.7 0.5 260
2.5 7/0.67 2.01 1.0 1.2 0.3 0.9 14.8 0.6 305
4 7/0.85 2.55 1.0 1.2 0.3 0.9 15.9 0.6 365
6 7/1.04 3.12 1.0 1.3 0.3 1.0 17.4 0.7 445
10 7/1.35 4.05 1.0 1.3 0.3 1.0 19.3 0.8 575
16 7/1.70 5.10 1.0 1.4 0.3 1.1 21.8 0.9 765
25 7/2.14 6.42 1.2 1.5 0.3 1.2 25.6 1.0 1080
35 7/2.52 7.56 1.2 1.6 0.3 1.2 28.1 1.1 1350
50 19/1.78 8.90 1.4 1.8 0.3 1.3 32.2 1.3 1770
70 19/2.14 10.7 1.4 1.9 0.4 1.4 36.7 1.5 2440
95 19/2.52 12.6 1.6 2.1 0.4 1.6 42.7 1.6 3280
120 37/2.03 14.2 1.6 2.3 0.4 1.7 46.5 1.7 3970
150 37/2.25 15.8 1.8 2.4 0.4 1.8 50.9 1.8 4760
185 37/2.52 17.6 2.0 2.6 0.4 1.9 55.9 1.9 5810
TABLE 14 0.6/1 kV TPY 0.6/1 kV FA-TPY
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Nominal diam. over
sheath
Tolerance of
overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 1.0 1.2 11.2 0.5 150
2.5 7/0.67 2.01 1.0 1.2 12.2 0.5 195
4 7/0.85 2.55 1.0 1.2 13.4 0.6 255
6 7/1.04 3.12 1.0 1.3 14.8 0.6 335
10 7/1.35 4.05 1.0 1.4 17.0 0.7 485
16 7/1.70 5.10 1.0 1.5 19.5 0.8 700
25 7/2.14 6.42 1.2 1.6 23.4 1.0 1060
35 7/2.52 7.56 1.2 1.7 26.1 1.1 1390
50 19/1.78 8.90 1.4 1.9 30.2 1.3 1870
70 19/2.14 10.7 1.4 2.0 34.3 1.4 2570
95 19/2.52 12.6 1.6 2.2 40.1 1.6 3530
120 37/2.03 14.2 1.6 2.4 44.0 1.7 4370
150 37/2.25 15.8 1.8 2.5 48.5 1.8 5340
185 37/2.52 17.6 2.0 2.7 53.6 1.9 6640
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
15
TABLE 15 0.6/1 kV TPYC 0.6/1 kV FA-TPYC
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Nominal overall diam.
Tolerance of diam.
over sheath & overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 1.0 1.2 0.3 12.5 0.5 245
2.5 7/0.67 2.01 1.0 1.2 0.3 13.5 0.5 295
4 7/0.85 2.55 1.0 1.2 0.3 14.7 0.6 365
6 7/1.04 3.12 1.0 1.3 0.3 16.1 0.6 455
10 7/1.35 4.05 1.0 1.4 0.3 18.3 0.7 625
16 7/1.70 5.10 1.0 1.5 0.3 20.8 0.8 855
25 7/2.14 6.42 1.2 1.6 0.3 24.7 1.0 1240
35 7/2.52 7.56 1.2 1.7 0.3 27.4 1.1 1600
50 19/1.78 8.90 1.4 1.9 0.4 32.0 1.3 2200
70 19/2.14 10.7 1.4 2.0 0.4 36.1 1.4 2950
95 19/2.52 12.6 1.6 2.2 0.4 41.9 1.6 3980
120 37/2.03 14.2 1.6 2.4 0.4 45.8 1.7 4860
150 37/2.25 15.8 1.8 2.5 0.4 50.3 1.8 5870
185 37/2.52 17.6 2.0 2.7 0.4 55.4 1.9 7230
TABLE 16 0.6/1 kV TPYCY 0.6/1 kV FA-TPYCY
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Radial thickness ofprotective covering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 1.0 1.2 0.3 0.9 14.5 0.6 300
2.5 7/0.67 2.01 1.0 1.2 0.3 0.9 15.5 0.6 355
4 7/0.85 2.55 1.0 1.2 0.3 1.0 16.9 0.7 440
6 7/1.04 3.12 1.0 1.3 0.3 1.0 18.3 0.7 535
10 7/1.35 4.05 1.0 1.4 0.3 1.1 20.7 0.8 725
16 7/1.70 5.10 1.0 1.5 0.3 1.1 23.2 0.9 970
25 7/2.14 6.42 1.2 1.6 0.3 1.2 27.3 1.1 1390
35 7/2.52 7.56 1.2 1.7 0.3 1.3 30.2 1.2 1770
50 19/1.78 8.90 1.4 1.9 0.4 1.4 35.0 1.4 2420
70 19/2.14 10.7 1.4 2.0 0.4 1.5 39.5 1.6 3220
95 19/2.52 12.6 1.6 2.2 0.4 1.6 45.5 1.7 4310
120 37/2.03 14.2 1.6 2.4 0.4 1.7 49.6 1.8 5250
150 37/2.25 15.8 1.8 2.5 0.4 1.9 54.5 1.9 6350
185 37/2.52 17.6 2.0 2.7 0.4 2.0 59.8 2.0 7770
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
16
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
17
0.6/1kV FA-TPYCYSLA
Rated Voltage 0.6/1 kV
Power and Lighting Cable
Cable Symbols DPYCSLA, FA-DPYCSLA
TPYCSLA, FA-TPYCSLA
DPYCYSLA, FA-DPYCYSLA
TPYCYSLA, FA-TPYCYSLA
Application Standard Design guide JIS C 3410(2010),IEC 60092-350(2008-02), IEC 60092-351(2004-04), IEC 60092-353(2001-04), IEC 60092-359(1999-08)
Flame retardant IEC 60332-1& IEC 60332-3-22 Category A (FA-Type)
Max. conductor temperature 90
CONSTRUCTIONClassification Code Construction Detail
Conductor D(T) Stranded tinned annealed copper wires as per JIS C 3410.
Insulation P EPR as per JIS C 3410,IEC 60092-351
Cabling Insulated conductors shall be cabled.
Flame retardant & Non-hygroscopic fillers may be used.
Suitable tape(s) may be applied on the cabled core.
Shielded SLA Overall Shielded with Aluminium foil-mylar tape and drain wire
Sheath Y PVC as per JIS C 3410,IEC 60092-353
Armor C Braid of galvanized steel wires.
Coverage density is minimum 90%.
Paint The white paint shall be painted uniformly on the steel wire braid
Protective covering Type, paint is dispensable.
Protective Covering Y PVC as per JIS C 3410.
Outer sheath color : Black
Core identification 2Cores:Black, White
3Cores:Black, White, Red
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
18
TABLE 17 0.6/1 kV DPYCSLA 0.6/1 kV FA-DPYCSLA
No. of cores
Conductor Radial
thickness of
insulation
AL-mylar tape
thickness
Radial thickness
of sheath
Diam. of metal wire
braid armour
Nominal overall diam.
Tolerance of diam. over sheath &
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm ± mm kg/km
2 1.5 7/0.52 1.56 1.0 0.05 1.1 0.3 11.9 0.5 215
2 2.5 7/0.67 2.01 1.0 0.05 1.2 0.3 13.0 0.5 260
2 4 7/0.85 2.55 1.0 0.05 1.2 0.3 14.1 0.6 310
TABLE 18 0.6/1 kV TPYCSLA 0.6/1 kV FA-TPYCSLA
No. of cores
Conductor Radial
thickness of
insulation
AL-mylar tape
thickness
Radial thickness
of sheath
Diam. of metal wire
braid armour
Nominal overall diam.
Tolerance of diam. over sheath &
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm ± mm kg/km
3 1.5 7/0.52 1.56 1.0 0.05 1.2 0.3 12.7 0.5 255
3 2.5 7/0.67 2.01 1.0 0.05 1.2 0.3 13.7 0.5 305
3 4 7/0.85 2.55 1.0 0.05 1.2 0.3 14.9 0.6 375
TABLE 19 0.6/1 kV DPYCYSLA 0.6/1 kV FA-DPYCYSLA
No. of cores
Conductor Radial thickness
of insulation
AL-mylar tape
thickness
Radial thickness
of sheath
Diam. of metal wire
braid armour
Radial thickness
of protective covering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm mm ± mm kg/km
2 1.5 7/0.52 1.56 1.0 0.05 1.1 0.3 0.9 13.9 0.6 270
2 2.5 7/0.67 2.01 1.0 0.05 1.2 0.3 0.9 15.0 0.6 320
2 4 7/0.85 2.55 1.0 0.05 1.2 0.3 1.0 16.3 0.7 385
TABLE 20 0.6/1 kV TPYCYSLA 0.6/1 kV FA-TPYCYSLA
No. of cores
Conductor Radial thickness
of insulation
AL-mylar tape
thickness
Radial thickness
of sheath
Diam. of metal wire
braid armour
Radial thickness
of protective covering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm mm ± mm kg/km
3 1.5 7/0.52 1.56 1.0 0.05 1.2 0.3 0.9 14.7 0.6 315
3 2.5 7/0.67 2.01 1.0 0.05 1.2 0.3 0.9 15.7 0.6 365
3 4 7/0.85 2.55 1.0 0.05 1.2 0.3 1.0 17.1 0.7 450
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
19
0.6/1kV FR-FA-TPYCY
Rated Voltage 0.6/1 kV
Power and Lighting Cable
Cable Symbols FR-DPY, FR-FA-DPY
FR-DPYC, FR-FA-DPYC
FR-DPYCY, FR-FA-DPYCY
FR-TPY, FR-FA-TPY
FR-TPYC, FR-FA-TPYC
FR-TPYCY, FR-FA-TPYCY
Application Standard Design guide JIS C 3410(2010),IEC 60092-350(2008-02), IEC 60092-351(2004-04), IEC 60092-353(2001-04), IEC 60092-359(1999-08)
Flame retardant IEC 60332-1& IEC 60332-3-22 Category A (FA-Type)
Fire resistant IEC 60331 1/2
Max. conductor temperature 90
CONSTRUCTIONClassification Code Construction Detail
Conductor D(T) Stranded tinned annealed copper wires as per JIS C 3410.
Insulation P EPR as per JIS C 3410,IEC 60092-351
Cabling Insulated conductors shall be cabled.
Flame retardant & Non-hygroscopic fillers may be used.
Suitable tape(s) may be applied on the cabled core.
Sheath Y PVC as per JIS C 3410,IEC 60092-353
Armor C Braid of galvanized steel wires.
Coverage density is minimum 90%.
Paint The white paint shall be painted uniformly on the steel wire braid
Protective covering Type, paint is dispensable.
Protective Covering Y PVC as per JIS C 3410.
Outer sheath color : Gray
Core identification 2Cores Black, White
3Cores Black, White, Red
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
20
TABLE 21 0.6/1 kV FR-DPY 0.6/1 kV FR-FA-DPY
Conductor Fire resistant
layer
Radial thickness
of insulation
Radial thickness
of sheath
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 0.5 1.0 1.2 12.8 0.6 165
2.5 7/0.67 2.01 0.5 1.0 1.3 13.9 0.6 205
4 7/0.85 2.55 0.5 1.0 1.3 15.0 0.7 255
6 7/1.04 3.12 0.5 1.0 1.3 16.1 0.7 310
10 7/1.35 4.05 0.5 1.0 1.4 18.2 0.8 430
16 7/1.70 5.10 0.5 1.0 1.5 20.5 0.9 590
25 7/2.14 6.42 0.5 1.2 1.6 24.1 1.0 860
35 7/2.52 7.56 0.5 1.2 1.7 26.6 1.1 1110
50 19/1.78 8.90 0.5 1.4 1.9 30.5 1.3 1480
70 19/2.14 10.7 0.5 1.4 2.0 34.3 1.4 1990
95 19/2.52 12.6 0.5 1.6 2.2 39.7 1.6 2700
120 37/2.03 14.2 0.5 1.6 2.3 43.1 1.7 3300
150 37/2.25 15.8 0.5 1.8 2.5 47.5 1.8 4030
185 37/2.52 17.6 0.5 2.0 2.7 52.3 1.9 4980
TABLE 22 0.6/1 kV FR-DPYC 0.6/1 kV FR-FA-DPYC
Conductor Fire resistant
layer
Radial thickness
of insulation
Radial thickness
of sheath
Diam. of metal wire
braid armour
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
SQ No./mm mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 0.5 1.0 1.2 0.3 14.1 0.6 270
2.5 7/0.67 2.01 0.5 1.0 1.3 0.3 15.2 0.6 320
4 7/0.85 2.55 0.5 1.0 1.3 0.3 16.3 0.7 375
6 7/1.04 3.12 0.5 1.0 1.3 0.3 17.4 0.7 440
10 7/1.35 4.05 0.5 1.0 1.4 0.3 19.5 0.8 575
16 7/1.70 5.10 0.5 1.0 1.5 0.3 21.8 0.9 755
25 7/2.14 6.42 0.5 1.2 1.6 0.3 25.4 1.0 1060
35 7/2.52 7.56 0.5 1.2 1.7 0.3 27.9 1.1 1320
50 19/1.78 8.90 0.5 1.4 1.9 0.4 32.3 1.3 1820
70 19/2.14 10.7 0.5 1.4 2.0 0.4 36.1 1.4 2370
95 19/2.52 12.6 0.5 1.6 2.2 0.4 41.5 1.6 3140
120 37/2.03 14.2 0.5 1.6 2.3 0.4 44.9 1.7 3770
150 37/2.25 15.8 0.5 1.8 2.5 0.4 49.3 1.8 4550
185 37/2.52 17.6 0.5 2.0 2.7 0.4 54.1 1.9 5550
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
21
TABLE 23 0.6/1 kV FR-DPYCY 0.6/1 kV FR-FA-DPYCY
Conductor Fire resistant
layer
Radial thickness
of insulation
Radial thickness
of sheath
Diam. of metal
wire braidarmour
Radial thickness ofprotectivecovering
Nominal overall diam.
Toleranceof
overall diam.
Cable weight
(Approx.)Size Construction O.D
SQ No./mm mm mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 0.5 1.0 1.2 0.3 1.0 16.3 0.7 340
2.5 7/0.67 2.01 0.5 1.0 1.3 0.3 1.0 17.4 0.7 395
4 7/0.85 2.55 0.5 1.0 1.3 0.3 1.0 18.5 0.7 455
6 7/1.04 3.12 0.5 1.0 1.3 0.3 1.0 19.6 0.8 530
10 7/1.35 4.05 0.5 1.0 1.4 0.3 1.1 21.9 0.9 685
16 7/1.70 5.10 0.5 1.0 1.5 0.3 1.1 24.4 1.0 875
25 7/2.14 6.42 0.5 1.2 1.6 0.3 1.2 28.0 1.1 1210
35 7/2.52 7.56 0.5 1.2 1.7 0.3 1.3 30.7 1.2 1500
50 19/1.78 8.90 0.5 1.4 1.9 0.4 1.4 35.3 1.4 2030
70 19/2.14 10.7 0.5 1.4 2.0 0.4 1.5 39.5 1.6 2640
95 19/2.52 12.6 0.5 1.6 2.2 0.4 1.6 45.1 1.7 3480
120 37/2.03 14.2 0.5 1.6 2.3 0.4 1.7 48.7 1.8 4160
150 37/2.25 15.8 0.5 1.8 2.5 0.4 1.8 53.3 1.9 4990
185 37/2.52 17.6 0.5 2.0 2.7 0.4 2.0 58.5 2.0 6080
TABLE 24 0.6/1 kV FR-TPY 0.6/1 kV FR-FA-TPY
Conductor Fire resistant
layer
Radial thickness
of insulation
Radial thickness
of sheath
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 0.5 1.0 1.2 13.6 0.6 205
2.5 7/0.67 2.01 0.5 1.0 1.3 14.8 0.6 255
4 7/0.85 2.55 0.5 1.0 1.3 16.0 0.7 320
6 7/1.04 3.12 0.5 1.0 1.4 17.4 0.7 410
10 7/1.35 4.05 0.5 1.0 1.5 19.6 0.8 570
16 7/1.70 5.10 0.5 1.0 1.6 22.1 0.9 795
25 7/2.14 6.42 0.5 1.2 1.7 26.0 1.1 1170
35 7/2.52 7.56 0.5 1.2 1.8 28.6 1.2 1520
50 19/1.78 8.90 0.5 1.4 2.0 32.8 1.4 2010
70 19/2.14 10.7 0.5 1.4 2.1 36.9 1.5 2730
95 19/2.52 12.6 0.5 1.6 2.3 42.7 1.7 3730
120 37/2.03 14.2 0.5 1.6 2.5 46.5 1.8 4580
150 37/2.25 15.8 0.5 1.8 2.6 51.1 1.9 5570
185 37/2.52 17.6 0.5 2.0 2.8 56.2 2.0 6890
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
22
TABLE 25 0.6/1 kV FR-TPYC 0.6/1 kV FR-FA-TPYC
Conductor Fire resistant
layer
Radial thickness
of insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.) Size Construction O.D
SQ No./mm mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 0.5 1.0 1.2 0.3 14.9 0.6 315
2.5 7/0.67 2.01 0.5 1.0 1.3 0.3 16.1 0.6 375
4 7/0.85 2.55 0.5 1.0 1.3 0.3 17.3 0.7 450
6 7/1.04 3.12 0.5 1.0 1.4 0.3 18.7 0.7 550
10 7/1.35 4.05 0.5 1.0 1.5 0.3 20.9 0.8 730
16 7/1.70 5.10 0.5 1.0 1.6 0.3 23.4 0.9 975
25 7/2.14 6.42 0.5 1.2 1.7 0.3 27.3 1.1 1380
35 7/2.52 7.56 0.5 1.2 1.8 0.3 29.9 1.2 1740
50 19/1.78 8.90 0.5 1.4 2.0 0.4 34.6 1.4 2380
70 19/2.14 10.7 0.5 1.4 2.1 0.4 38.7 1.5 3140
95 19/2.52 12.6 0.5 1.6 2.3 0.4 44.5 1.7 4200
120 37/2.03 14.2 0.5 1.6 2.5 0.4 48.3 1.8 5090
150 37/2.25 15.8 0.5 1.8 2.6 0.4 52.9 1.9 6130
185 37/2.52 17.6 0.5 2.0 2.8 0.4 58.0 2.0 7510
TABLE 26 0.6/1 kV FR-TPYCY 0.6/1 kV FR-FA-TPYCY
Conductor Fire resistant
layer
Radial thickness
of insulation
Radial thickness
of sheath
Diam. of metal
wire braidarmour
Radial thickness ofprotectivecovering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
SQ No./mm mm mm mm mm mm mm mm ± mm kg/km
1.5 7/0.52 1.56 0.5 1.0 1.2 0.3 1.0 17.1 0.7 390
2.5 7/0.67 2.01 0.5 1.0 1.3 0.3 1.0 18.3 0.7 460
4 7/0.85 2.55 0.5 1.0 1.3 0.3 1.0 19.5 0.8 540
6 7/1.04 3.12 0.5 1.0 1.4 0.3 1.1 21.1 0.8 650
10 7/1.35 4.05 0.5 1.0 1.5 0.3 1.1 23.3 0.9 845
16 7/1.70 5.10 0.5 1.0 1.6 0.3 1.2 26.0 1.0 1110
25 7/2.14 6.42 0.5 1.2 1.7 0.3 1.3 30.1 1.2 1550
35 7/2.52 7.56 0.5 1.2 1.8 0.3 1.3 32.7 1.3 1930
50 19/1.78 8.90 0.5 1.4 2.0 0.4 1.5 38.0 1.5 2640
70 19/2.14 10.7 0.5 1.4 2.1 0.4 1.6 42.3 1.6 3450
95 19/2.52 12.6 0.5 1.6 2.3 0.4 1.7 48.3 1.8 4580
120 37/2.03 14.2 0.5 1.6 2.5 0.4 1.8 52.3 1.9 5520
150 37/2.25 15.8 0.5 1.8 2.6 0.4 1.9 57.1 2.0 6630
185 37/2.52 17.6 0.5 2.0 2.8 0.4 2.1 62.6 2.1 8110
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
23
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
25
150/250V FA-MPYCY
Rated Voltage 150/ 250V
Control and Signal Cable
Cable Symbols MPY, FA-MPY
MPYC, FA-MPYC
MPYCY, FA-MPYCY
Application Standard Design guide JIS C 3410(2010),IEC 60092-350(2008-02), IEC 60092-351(2004-04), IEC 60092-353(2001-04), IEC 60092-359(1999-08), IEC 60092-376(2003-05)
Flame retardant IEC 60332-1& IEC 60332-3-22 Category A (FA-Type)
Max. conductor temperature 90
CONSTRUCTIONClassification Code Construction Detail
Conductor M Stranded tinned annealed copper wires as per JIS C 3410.
Insulation P EPR as per JIS C 3410,IEC 60092-351
Cabling Insulated conductors shall be cabled.
Flame retardant & Non-hygroscopic fillers may be used.
Suitable tape(s) may be applied on the cabled core.
Sheath Y PVC as per JIS C 3410,IEC 60092-353
Armor C Braid of galvanized steel wires.
Coverage density is minimum 90%.
Paint The white paint shall be painted uniformly on the steel wire braid
Protective covering Type, paint is dispensable.
Protective Covering Y PVC as per JIS C 3410.
Outer sheath color : Black
Core identification Identification - by number.
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
26
TABLE 27 150/250 V MPY 150/250 V FA-MPY
No. of cores
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Nominal diam. over
sheath
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm ± mm kg/km
2 1 7/0.43 1.29 0.6 1.1 8.7 0.4 85
4 1 7/0.43 1.29 0.6 1.1 9.9 0.4 125
7 1 7/0.43 1.29 0.6 1.2 11.9 0.5 190
12 1 7/0.43 1.29 0.6 1.3 15.5 0.7 315
19 1 7/0.43 1.29 0.6 1.4 18.3 0.8 465
27 1 7/0.43 1.29 0.6 1.6 22.1 0.9 665
37 1 7/0.43 1.29 0.6 1.7 24.8 1.0 870
44 1 7/0.43 1.29 0.6 1.8 28.0 1.2 1060
77 1 7/0.43 1.29 0.6 2.1 35.9 1.5 1790
TABLE 28 150/250 V MPYC 150/250 V FA-MPYC
No. of cores
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal wire
braid armour
Nominal overall diam.
Tolerance of diam. over sheath &
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm mm ± mm kg/km
2 1 7/0.43 1.29 0.6 1.1 0.3 10.0 0.4 155
4 1 7/0.43 1.29 0.6 1.1 0.3 11.2 0.4 205
7 1 7/0.43 1.29 0.6 1.2 0.3 13.2 0.5 290
12 1 7/0.43 1.29 0.6 1.3 0.3 16.8 0.7 440
19 1 7/0.43 1.29 0.6 1.4 0.3 19.6 0.8 615
27 1 7/0.43 1.29 0.6 1.6 0.3 23.4 0.9 840
37 1 7/0.43 1.29 0.6 1.7 0.3 26.1 1.0 1070
44 1 7/0.43 1.29 0.6 1.8 0.3 29.3 1.2 1290
77 1 7/0.43 1.29 0.6 2.1 0.4 37.7 1.5 2190
TABLE 29 150/250 V MPYCY 150/250 V FA-MPYCY
No. of cores
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal wire
braid armour
Radial thickness of protective covering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm ± mm kg/km
2 1 7/0.43 1.29 0.6 1.1 0.3 0.9 12.0 0.5 205
4 1 7/0.43 1.29 0.6 1.1 0.3 0.9 13.2 0.5 260
7 1 7/0.43 1.29 0.6 1.2 0.3 0.9 15.2 0.6 350
12 1 7/0.43 1.29 0.6 1.3 0.3 1.0 19.0 0.8 525
19 1 7/0.43 1.29 0.6 1.4 0.3 1.1 22.0 0.9 720
27 1 7/0.43 1.29 0.6 1.6 0.3 1.2 26.0 1.0 980
37 1 7/0.43 1.29 0.6 1.7 0.3 1.3 28.9 1.2 1240
44 1 7/0.43 1.29 0.6 1.8 0.3 1.3 32.1 1.3 1470
77 1 7/0.43 1.29 0.6 2.1 0.4 1.5 41.1 1.6 2480
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
27
150/250V FA-MPYCYSLA
Rated Voltage 150/ 250V
Control and Signal Cable
Cable Symbols MPYCSLA, FA-MPYCSLA
MPYCYSLA, FA-MPYCYSLA
MPYC-S, FA-MPYC-S
MPYCY-S, FA-MPYCY-S
Application Standard Design guide JIS C 3410(2010),IEC 60092-350(2008-02), IEC 60092-351(2004-04), IEC 60092-353(2001-04), IEC 60092-359(1999-08), IEC 60092-376(2003-05)
Flame retardant IEC 60332-1& IEC 60332-3-22 Category A (FA-Type)
Max. conductor temperature 90
CONSTRUCTIONClassification Code Construction Detail
Conductor M Stranded tinned annealed copper wires as per JIS C 3410.
Insulation P EPR as per JIS C 3410,IEC 60092-351
Cabling Insulated conductors shall be cabled.
Flame retardant & Non-hygroscopic fillers may be used.
Suitable tape(s) may be applied on the cabled core.
Shielded SLA Overall Shielded with Aluminium foil-mylar tape and drain wire
-S Individual core shielded with copper wire braid
Sheath Y PVC as per JIS C 3410,IEC 60092-353
Armor C Braid of galvanized steel wires.
Coverage density is minimum 90%.
Paint The white paint shall be painted uniformly on the steel wire braid
Protective covering Type, paint is dispensable.
Protective Covering Y PVC as per JIS C 3410.
Outer sheath color : Black
Core identification Identification - by number.
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
28
TABLE 30 150/250 V MPYCSLA 150/250 V FA-MPYCSLA
No. of cores
Conductor Radial
thickness of
insulation
AL-mylar tape
thickness
Radial thickness
of sheath
Diam. of metal wire
braid armour
Nominal overall diam.
Tolerance of diam. over sheath &
overall diam.
Cable weight
(Approx.) Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm ± mm kg/km
2 1 7/0.43 1.29 0.6 0.05 1.1 0.3 10.2 0.4 160
4 1 7/0.43 1.29 0.6 0.05 1.1 0.3 11.4 0.5 210
7 1 7/0.43 1.29 0.6 0.05 1.2 0.3 13.4 0.5 290
12 1 7/0.43 1.29 0.6 0.05 1.3 0.3 17.0 0.7 444
19 1 7/0.43 1.29 0.6 0.05 1.4 0.3 19.8 0.8 615
27 1 7/0.43 1.29 0.6 0.05 1.6 0.3 23.6 0.9 845
37 1 7/0.43 1.29 0.6 0.05 1.7 0.3 26.3 1.1 1070
44 1 7/0.43 1.29 0.6 0.05 1.8 0.3 29.5 1.2 1290
TABLE 31 150/250 V MPYCYSLA 150/250 V FA-MPYCYSLA
No. of cores
Conductor Radial
thickness of
insulation
AL-mylar tape
thickness
Radial thickness
of sheath
Diam. of metal wire
braid armour
Radial thickness of protective covering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm mm ± mm kg/km
2 1 7/0.43 1.29 0.6 0.05 1.1 0.3 0.9 12.0 0.5 200
4 1 7/0.43 1.29 0.6 0.05 1.1 0.3 0.9 13.4 0.5 260
7 1 7/0.43 1.29 0.6 0.05 1.2 0.3 0.9 15.4 0.6 355
12 1 7/0.43 1.29 0.6 0.05 1.3 0.3 1.0 19.2 0.8 530
19 1 7/0.43 1.29 0.6 0.05 1.4 0.3 1.1 22.2 0.9 725
27 1 7/0.43 1.29 0.6 0.05 1.6 0.3 1.2 26.2 1.0 985
37 1 7/0.43 1.29 0.6 0.05 1.7 0.3 1.3 29.1 1.2 1240
44 1 7/0.43 1.29 0.6 0.05 1.8 0.3 1.3 32.5 1.3 1490
TABLE 32 150/250 V MPYC-S 150/250 V FA-MPYC-S
No. of cores
Conductor Radial
thicknessof
insulation
Braid wire diam.
of shielded
Radial thickness
of sheath
Diam. of metal wire
braid armour
Nominal overall diam.
Tolerance of diam. over sheath &
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm ± mm kg/km
2 1 7/0.43 1.29 0.6 0.12 1.1 0.3 11.4 0.5 180
4 1 7/0.43 1.29 0.6 0.12 1.2 0.3 13.1 0.5 305
7 1 7/0.43 1.29 0.6 0.12 1.3 0.3 15.5 0.6 445
12 1 7/0.43 1.29 0.6 0.12 1.4 0.3 20.0 0.8 705
19 1 7/0.43 1.29 0.6 0.12 1.6 0.3 23.5 0.9 1020
27 1 7/0.43 1.29 0.6 0.12 1.7 0.3 27.9 1.1 1400
37 1 7/0.43 1.29 0.6 0.12 1.9 0.3 31.4 1.3 1820
44 1 7/0.43 1.29 0.6 0.12 2.0 0.4 35.8 1.4 2290
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
29
TABLE 33 150/250 V MPYCY-S 150/250 V FA-MPYCY-S
No. of cores
Conductor Radial thickness
of insulation
Braid wire diam.
of shielded
Radial thickness
of sheath
Diam. of metal wire
braid armour
Radial thickness
of protective covering
Nominal overall diam.
Tolerance of diam.
over sheath & overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm mm ± mm kg/km
2 1 7/0.43 1.29 0.6 0.12 1.1 0.3 0.9 13.4 0.5 235
4 1 7/0.43 1.29 0.6 0.12 1.2 0.3 0.9 15.1 0.6 365
7 1 7/0.43 1.29 0.6 0.12 1.3 0.3 1.0 17.7 0.7 525
12 1 7/0.43 1.29 0.6 0.12 1.4 0.3 1.1 22.4 0.9 815
19 1 7/0.43 1.29 0.6 0.12 1.6 0.3 1.2 26.1 1.0 1160
27 1 7/0.43 1.29 0.6 0.12 1.7 0.3 1.3 30.7 1.2 1570
37 1 7/0.43 1.29 0.6 0.12 1.9 0.3 1.4 34.4 1.4 2030
44 1 7/0.43 1.29 0.6 0.12 2.0 0.4 1.5 39.0 1.6 2550
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
30
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
31
150/250V FR-FA-MPYCY
Rated Voltage 150/ 250V
Control and Signal Cable
Cable Symbols FR-MPY, FR-FA-MPY
FR-MPYC, FR-FA-MPYC
FR-MPYCY, FR-FA-MPYCY
Application Standard Design guide JIS C 3410(2010),IEC 60092-350(2008-02), IEC 60092-351(2004-04), IEC 60092-353(2001-04), IEC 60092-359(1999-08), IEC 60092-376(2003-05)
Flame retardant IEC 60332-1& IEC 60332-3-22 Category A (FA-Type)
Fire resistant IEC 60331 1/2
Max. conductor temperature 90
CONSTRUCTIONClassification Code Construction Detail
Conductor M Stranded tinned annealed copper wires as per JIS C 3410.
Insulation P EPR as per JIS C 3410,IEC 60092-351
Cabling Insulated conductors shall be cabled.
Flame retardant & Non-hygroscopic fillers may be used.
Suitable tape(s) may be applied on the cabled core.
Sheath Y PVC as per JIS C 3410,IEC 60092-353
Armor C Braid of galvanized steel wires.
Coverage density is minimum 90%.
Paint The white paint shall be painted uniformly on the steel wire braid
Protective covering Type, paint is dispensable.
Protective Covering Y PVC as per JIS C 3410.
Outer sheath color : Gray
Core identification Identification - by number.
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
32
TABLE 34 150/250 V FR-MPY 150/250 V FR-FA-MPY
No. of cores
Conductor Fire resistant
layer
Radial thickness
of insulation
Radial thickness
of sheath
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.) Size Construction O.D
No. SQ No./mm mm mm mm mm mm ± mm kg/km
2 1 7/0.43 1.29 0.5 0.6 1.1 10.9 0.5 120
4 1 7/0.43 1.29 0.5 0.6 1.2 12.8 0.6 185
7 1 7/0.43 1.29 0.5 0.6 1.3 15.4 0.7 285
12 1 7/0.43 1.29 0.5 0.6 1.5 20.5 0.9 485
19 1 7/0.43 1.29 0.5 0.6 1.6 24.2 1.0 705
27 1 7/0.43 1.29 0.5 0.6 1.8 29.3 1.2 1010
37 1 7/0.43 1.29 0.5 0.6 2.0 33.1 1.4 1330
44 1 7/0.43 1.29 0.5 0.6 2.1 37.4 1.6 1630
TABLE 35 150/250 V FR-MPYC 150/250 V FR-FA-MPYC
No. of cores
Conductor Fire resistant
layer
Radial thickness
of insulation
Radial thickness
of sheath
Diam. of metal wire
braid armour
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.) Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm ± mm kg/km
2 1 7/0.43 1.29 0.5 0.6 1.1 0.3 12.2 0.5 210
4 1 7/0.43 1.29 0.5 0.6 1.2 0.3 14.1 0.6 290
7 1 7/0.43 1.29 0.5 0.6 1.3 0.3 16.7 0.7 410
12 1 7/0.43 1.29 0.5 0.6 1.5 0.3 21.8 0.9 650
19 1 7/0.43 1.29 0.5 0.6 1.6 0.3 25.5 1.0 900
27 1 7/0.43 1.29 0.5 0.6 1.8 0.3 30.6 1.2 1250
37 1 7/0.43 1.29 0.5 0.6 2.0 0.4 34.9 1.4 1700
44 1 7/0.43 1.29 0.5 0.6 2.1 0.4 39.2 1.6 2040
TABLE 36 150/250 V FR-MPYCY 150/250 V FR-FA-MPYCY
No. of cores
Conductor Fire resistant
layer
Radial thickness
of insulation
Radial thickness
of sheath
Diam. of metal wire
braid armour
Radial thickness
of protective covering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. SQ No./mm mm mm mm mm mm mm mm ± mm kg/km
2 1 7/0.43 1.29 0.5 0.6 1.1 0.3 0.9 14.2 0.6 265
4 1 7/0.43 1.29 0.5 0.6 1.2 0.3 1.0 16.3 0.7 360
7 1 7/0.43 1.29 0.5 0.6 1.3 0.3 1.0 18.9 0.8 490
12 1 7/0.43 1.29 0.5 0.6 1.5 0.3 1.1 24.2 1.0 765
19 1 7/0.43 1.29 0.5 0.6 1.6 0.3 1.2 28.1 1.1 1050
27 1 7/0.43 1.29 0.5 0.6 1.8 0.3 1.4 33.6 1.3 1450
37 1 7/0.43 1.29 0.5 0.6 2.0 0.4 1.5 38.3 1.5 1970
44 1 7/0.43 1.29 0.5 0.6 2.1 0.4 1.6 42.8 1.7 2360
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
33
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
35
150/250V FA-TTYCY
Rated Voltage 150/ 250V
Telephone and Instrumentation Cable
Cable Symbols TTY, FA-TTY
TTYC, FA-TTYC
TTYCY, FA-TTYCY
Application Standard Design guide JIS C 3410(2010),IEC 60092-350(2008-02), IEC 60092-351(2004-04), IEC 60092-353(2001-04), IEC 60092-359(1999-08), IEC 60092-376(2003-05)
Flame retardant IEC 60332-1& IEC 60332-3-22 Category A (FA-Type)
Max. conductor temperature 70
CONSTRUCTIONClassification Code Construction Detail
Conductor Stranded annealed copper wires as per JIS C 3410.
Insulation Y PVC as per JIS C 3410,IEC 60092-353
Cabling Insulated conductors shall be cabled.
Flame retardant & Non-hygroscopic fillers may be used.
Suitable tape(s) may be applied on the cabled core.
Sheath Y PVC as per JIS C 3410,IEC 60092-353
Armor C Braid of galvanized steel wires.
Coverage density is minimum 90%.
Paint The white paint shall be painted uniformly on the steel wire braid
Protective covering Type, paint is dispensable.
Protective Covering Y PVC as per JIS C 3410.
Outer sheath color : Black
Core identification 1Pair :Black, White 1Triple :Black, White, Red 1Quad :Black, White, Red, Green Mult-pairs : The insulation for each pair shall be colored with one black and one white with printed arabic numberals on insulation identification
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
36
TABLE 37 150/250V TTY 150/250V FA-TTYNo. of
pairs
No. of
cores
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Nominal diam. over
sheath
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. No. SQ No./mm mm mm mm mm ± mm kg/km
1 2 0.75 7/0.37 1.11 0.6 1.0 7.9 0.4 65
1T 3 0.75 7/0.37 1.11 0.6 1.1 8.6 0.4 85
1Q 4 0.75 7/0.37 1.11 0.6 1.1 9.3 0.4 105
4 8 0.75 7/0.37 1.11 0.6 1.3 14.2 0.6 205
7 14 0.75 7/0.37 1.11 0.6 1.4 16.9 0.7 310
10 20 0.75 7/0.37 1.11 0.6 1.5 21.7 0.9 465
14 28 0.75 7/0.37 1.11 0.6 1.6 23.5 1.0 585
19 38 0.75 7/0.37 1.11 0.6 1.7 26.4 1.1 755
24 48 0.75 7/0.37 1.11 0.6 1.9 31.9 1.3 1030
30 60 0.75 7/0.37 1.11 0.6 2.0 34.0 1.4 1220
37 74 0.75 7/0.37 1.11 0.6 2.1 36.9 1.5 1450
48 96 0.75 7/0.37 1.11 0.6 2.3 42.8 1.7 1910
TABLE 38 150/250V TTYC 150/250V FA-TTYCNo. of
pairs
No. of
cores
Conductor Radial
thickness of
insulation
Radial thickness
of sheath
Diam. of metal
wire braid armour
Nominaloverall diam.
Tolerance of diam.
over sheath & overall diam.
Cable weight
(Approx.) Size Construction O.D
No. No. SQ No./mm mm mm mm mm mm ± mm kg/km
1 2 0.75 7/0.37 1.11 0.6 1.0 0.3 9.2 0.4 130
1T 3 0.75 7/0.37 1.11 0.6 1.1 0.3 9.9 0.4 160
1Q 4 0.75 7/0.37 1.11 0.6 1.1 0.3 10.6 0.4 180
4 8 0.75 7/0.37 1.11 0.6 1.3 0.3 15.5 0.6 320
7 14 0.75 7/0.37 1.11 0.6 1.4 0.3 18.2 0.7 445
10 20 0.75 7/0.37 1.11 0.6 1.5 0.3 23.0 0.9 640
14 28 0.75 7/0.37 1.11 0.6 1.6 0.3 24.8 1.0 775
19 38 0.75 7/0.37 1.11 0.6 1.7 0.3 27.7 1.1 965
24 48 0.75 7/0.37 1.11 0.6 1.9 0.4 33.7 1.3 1380
30 60 0.75 7/0.37 1.11 0.6 2.0 0.4 35.8 1.4 1590
37 74 0.75 7/0.37 1.11 0.6 2.1 0.4 38.7 1.5 1860
48 96 0.75 7/0.37 1.11 0.6 2.3 0.4 44.6 1.7 2380
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
37
TABLE 39 150/250V TTYCY 150/250V FA-TTYCY
No. of
pairs
No. of
cores
Conductor Radial
thicknessof
insulation
Radial thickness
of sheath
Diam. of metal
wire braidarmour
Radial thickness ofprotective covering
Nominal overall diam.
Toleranceof
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. No. SQ No./mm mm mm mm mm mm mm ± mm kg/km
1 2 0.75 7/0.37 1.11 0.6 1.0 0.3 0.8 11.0 0.4 170
1T 3 0.75 7/0.37 1.11 0.6 1.1 0.3 0.8 11.7 0.5 200
1Q 4 0.75 7/0.37 1.11 0.6 1.1 0.3 0.9 12.6 0.5 230
4 8 0.75 7/0.37 1.11 0.6 1.3 0.3 1.0 17.7 0.7 400
7 14 0.75 7/0.37 1.11 0.6 1.4 0.3 1.1 20.6 0.8 545
10 20 0.75 7/0.37 1.11 0.6 1.5 0.3 1.2 25.6 1.0 775
14 28 0.75 7/0.37 1.11 0.6 1.6 0.3 1.2 27.4 1.1 920
19 38 0.75 7/0.37 1.11 0.6 1.7 0.3 1.3 30.5 1.2 1140
24 48 0.75 7/0.37 1.11 0.6 1.9 0.4 1.4 36.7 1.5 1610
30 60 0.75 7/0.37 1.11 0.6 2.0 0.4 1.5 39.2 1.6 1870
37 74 0.75 7/0.37 1.11 0.6 2.1 0.4 1.6 42.3 1.6 2180
48 96 0.75 7/0.37 1.11 0.6 2.3 0.4 1.7 48.4 1.8 2760
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
38
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
39
150/250V FA-TTYCYSLA
Rated Voltage 150/ 250V
Telephone and Instrumentation Cable
Cable Symbols TTYCSLA, FA-TTYCSLA
TTYCYSLA, FA-TTYCYSLA
Application Standard Design guide JIS C 3410(2010),IEC 60092-350(2008-02), IEC 60092-351(2004-04), IEC 60092-353(2001-04), IEC 60092-359(1999-08), IEC 60092-376(2003-05)
Flame retardant IEC 60332-1& IEC 60332-3-22 Category A (FA-Type)
Max. conductor temperature 70
CONSTRUCTIONClassification Code Construction Detail
Conductor Stranded annealed copper wires as per JIS C 3410.
Insulation Y PVC as per JIS C 3410,IEC 60092-353
Cabling Insulated conductors shall be cabled.
Flame retardant & Non-hygroscopic fillers may be used.
Suitable tape(s) may be applied on the cabled core.
Shielded SLA Overall Shielded with Aluminium foil-mylar tape and drain wire
Sheath Y PVC as per JIS C 3410,IEC 60092-353
Armor C Braid of galvanized steel wires.
Coverage density is minimum 90%.
Paint The white paint shall be painted uniformly on the steel wire braid
Protective covering Type, paint is dispensable.
Protective Covering Y PVC as per JIS C 3410.
Outer sheath color : Black
Core identification 1Pair :Black, White 1Triple :Black, White, Red 1Quad :Black, White, Red, Green Mult-pairs : The insulation for each pair shall be colored with one black and one white with printed arabic numberals on insulation identification
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
40
TABLE 40 150/250V TTYCSLA 150/250V FA-TTYCSLA
No. of
pairs
No. of
cores
Conductor Radial thickness
of insulation
AL-mylartape
thickness
Radial thickness
of sheath
Diam. of metal
wire braidarmour
Nominal overall diam.
Tolerance of diam.
over sheath &
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. No. SQ No./mm mm mm mm mm mm mm ± mm kg/km
1 2 0.75 7/0.37 1.11 0.6 0.05 1.0 0.3 9.4 0.4 140
1T 3 0.75 7/0.37 1.11 0.6 0.05 1.1 0.3 10.1 0.4 170
1Q 4 0.75 7/0.37 1.11 0.6 0.05 1.1 0.3 10.8 0.4 190
4 8 0.75 7/0.37 1.11 0.6 0.05 1.3 0.3 15.7 0.6 335
7 14 0.75 7/0.37 1.11 0.6 0.05 1.4 0.3 18.4 0.7 460
10 20 0.75 7/0.37 1.11 0.6 0.05 1.6 0.3 23.4 0.9 665
14 28 0.75 7/0.37 1.11 0.6 0.05 1.6 0.3 25.0 1.0 790
19 38 0.75 7/0.37 1.11 0.6 0.05 1.7 0.3 27.9 1.1 985
24 48 0.75 7/0.37 1.11 0.6 0.05 1.9 0.4 33.9 1.4 1400
30 60 0.75 7/0.37 1.11 0.6 0.05 2.0 0.4 36.0 1.4 1610
37 74 0.75 7/0.37 1.11 0.6 0.05 2.1 0.4 38.9 1.6 1880
48 96 0.75 7/0.37 1.11 0.6 0.05 2.3 0.4 44.8 1.7 2410
TABLE 41 150/250V TTYCYSLA 150/250V FA-TTYCYSLA
No. of
pairs
No. of
cores
Conductor Radial thickness
of insulation
AL-mylartape
thickness
Radial thickness
of sheath
Diam. ofmetal
wire braidarmour
Radial thickness
of protectivecovering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. No. SQ No./mm mm mm mm mm mm mm mm ± mm kg/km
1 2 0.75 7/0.37 1.11 0.6 0.05 1.0 0.3 0.8 11.2 0.4 180
1T 3 0.75 7/0.37 1.11 0.6 0.05 1.1 0.3 0.9 12.1 0.5 215
1Q 4 0.75 7/0.37 1.11 0.6 0.05 1.1 0.3 0.9 12.8 0.5 240
4 8 0.75 7/0.37 1.11 0.6 0.05 1.3 0.3 1.0 17.9 0.7 410
7 14 0.75 7/0.37 1.11 0.6 0.05 1.4 0.3 1.1 20.8 0.8 560
10 20 0.75 7/0.37 1.11 0.6 0.05 1.6 0.3 1.2 26.0 1.0 805
14 28 0.75 7/0.37 1.11 0.6 0.05 1.6 0.3 1.2 27.6 1.1 935
19 38 0.75 7/0.37 1.11 0.6 0.05 1.7 0.3 1.3 30.7 1.2 1160
24 48 0.75 7/0.37 1.11 0.6 0.05 1.9 0.4 1.4 36.9 1.5 1630
30 60 0.75 7/0.37 1.11 0.6 0.05 2.0 0.4 1.5 39.4 1.6 1890
37 74 0.75 7/0.37 1.11 0.6 0.05 2.1 0.4 1.6 42.5 1.6 2200
48 96 0.75 7/0.37 1.11 0.6 0.05 2.3 0.4 1.7 48.6 1.7 2790
High Voltage Pow
er CablePow
er & Lighting Cable
Control & Signal Cable
Telephone andInstrum
entation Cable
41
150/250V FA-TTYCY-SLA
Rated Voltage 150/ 250V
Telephone and Instrumentation Cable
Cable Symbols TTYC-SLA, FA-TTYC-SLA
TTYCY-SLA, FA-TTYCY-SLA
Application Standard Design guide JIS C 3410(2010),IEC 60092-350(2008-02), IEC 60092-351(2004-04), IEC 60092-353(2001-04), IEC 60092-359(1999-08), IEC 60092-376(2003-05)
Flame retardant IEC 60332-1& IEC 60332-3-22 Category A (FA-Type)
Max. conductor temperature 70
CONSTRUCTIONClassification Code Construction Detail
Conductor Stranded annealed copper wires as per JIS C 3410.
Insulation Y PVC as per JIS C 3410,IEC 60092-353
Cabling Insulated conductors shall be cabled.
Flame retardant & Non-hygroscopic fillers may be used.
Suitable tape(s) may be applied on the cabled core.
Shielded -SLA Individual pairs shielded - with Aluminium foil-mylar tape and drain wire.
Sheath Y PVC as per JIS C 3410,IEC 60092-353
Armor C Braid of galvanized steel wires.
Coverage density is minimum 90%.
Paint The white paint shall be painted uniformly on the steel wire braid
Protective covering Type, paint is dispensable.
Protective Covering Y PVC as per JIS C 3410.
Outer sheath color : Black
Core identification 1Pair :Black, White 1Triple :Black, White, Red 1Quad :Black, White, Red, Green Mult-pairs : The insulation for each pair shall be colored with one black and one white with printed arabic numberals on insulation identification
Hig
h Vo
ltage
Pow
er C
able
Pow
er &
Lig
htin
g Ca
ble
Cont
rol &
Sig
nal C
able
Tele
phon
e an
dIn
stru
men
tatio
n Ca
ble
42
TABLE 42 150/250V TTYC-SLA 150/250V FA-TTYC-SLA
No. of
pairs
No. of
cores
Conductor Radial thickness
of insulation
AL-mylartape
thickness
Radial thickness
of sheath
Diam. of metal
wire braidarmour
Nominal overall diam.
Tolerance of diam.
over sheath &
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. No. SQ No./mm mm mm mm mm mm mm ± mm kg/km
4 8 0.75 7/0.37 1.11 0.6 0.05 1.3 0.3 17.3 0.7 380
7 14 0.75 7/0.37 1.11 0.6 0.05 1.5 0.3 20.8 0.8 545
10 20 0.75 7/0.37 1.11 0.6 0.05 1.7 0.3 26.5 1.1 805
14 28 0.75 7/0.37 1.11 0.6 0.05 1.8 0.3 28.9 1.2 980
19 38 0.75 7/0.37 1.11 0.6 0.05 1.9 0.4 32.7 1.3 1320
24 48 0.75 7/0.37 1.11 0.6 0.05 2.1 0.4 38.4 1.5 1710
30 60 0.75 7/0.37 1.11 0.6 0.05 2.2 0.4 40.9 1.6 1970
37 74 0.75 7/0.37 1.11 0.6 0.05 2.3 0.4 44.1 1.7 2300
48 96 0.75 7/0.37 1.11 0.6 0.05 2.6 0.4 50.9 1.9 2960
TABLE 43 150/250V TTYCY-SLA 150/250V FA-TTYCY-SLANo. of
pairs
No. of
cores
Conductor Radial
thickness of
insulation
AL-mylartape
thickness
Radialthickness
of sheath
Diam. ofmetal
wire braidarmour
Radial thickness
of protectivecovering
Nominal overall diam.
Tolerance of
overall diam.
Cable weight
(Approx.)Size Construction O.D
No. No. SQ No./mm mm mm mm mm mm mm mm ± mm kg/km
4 8 0.75 7/0.37 1.11 0.6 0.05 1.3 0.3 1.0 19.5 0.8 465
7 14 0.75 7/0.37 1.11 0.6 0.05 1.5 0.3 1.1 23.2 0.9 660
10 20 0.75 7/0.37 1.11 0.6 0.05 1.7 0.3 1.3 29.3 1.2 970
14 28 0.75 7/0.37 1.11 0.6 0.05 1.8 0.3 1.3 31.7 1.3 1160
19 38 0.75 7/0.37 1.11 0.6 0.05 1.9 0.4 1.4 35.7 1.4 1540
24 48 0.75 7/0.37 1.11 0.6 0.05 2.1 0.4 1.6 42.0 1.6 2020
30 60 0.75 7/0.37 1.11 0.6 0.05 2.2 0.4 1.6 44.5 1.7 2300
37 74 0.75 7/0.37 1.11 0.6 0.05 2.3 0.4 1.7 47.9 1.8 2670
48 96 0.75 7/0.37 1.11 0.6 0.05 2.6 0.4 1.9 55.1 1.9 3440
43
Electric Technical Information
Conductor Conductor Resistance
(20 )
AC Test voltage (5min)
Insulation Resistance (20 )
Size Construction O.D Plain Tinned 6/10kV 3.6/6kV 0.6/1kV 150/250V 6/10kV 3.6/6kV 0.6/1kV 150/250V
mm2 No./mm mm /km /km V V V V M .km M .km M .km M .km
0.75 7/0.37 1.11 26.0 26.7 --- --- --- 1500 --- --- --- 20
1 7/0.43 1.29 19.2 19.3 --- --- --- 1500 --- --- --- 1000(700)
1.5 7/0.52 1.56 12.1 12.2 --- --- 3500 --- --- --- 1300(1000) 1000
2.5 7/0.67 2.01 7.41 7.56 --- --- 3500 --- --- --- 1100(900) ---
4 7/0.85 2.55 4.61 4.70 --- --- 3500 --- --- --- 1000(800) ---
6 7/1.04 3.12 3.08 3.11 --- --- 3500 --- --- --- 800(700) ---
10 7/1.35 4.05 1.83 1.84 --- 12000 3500 --- --- 1000 700(600) ---
16 7/1.70 5.1 1.15 1.16 21000 12000 3500 --- 1100 900 600(500) ---
25 7/2.14 6.42 0.727 0.734 21000 12000 3500 --- 1000 800 500(450) ---
35 7/2.52 7.56 0.524 0.529 21000 12000 3500 --- 900 700 450(400) ---
50 19/1.78 8.9 0.387 0.391 21000 12000 3500 --- 800 700 450(400) ---
70 19/2.14 10.7 0.268 0.270 21000 12000 3500 --- 700 600 450(350) ---
95 19/2.52 12.6 0.193 0.195 21000 12000 3500 --- 700 500 400(350) ---
120 37/2.03 14.2 0.153 0.154 21000 12000 3500 --- 600 450 350(350) ---
150 37/2.25 15.8 0.124 0.126 21000 12000 3500 --- 600 400 350(350) ---
185 37/2.52 17.6 0.0991 0.1000 21000 12000 3500 --- 500 400 350(350) ---
240 61/2.25 20.3 0.0754 0.0762 21000 12000 3500 --- 450 350 350 ---
300 61/2.52 22.7 0.0601 0.0607 21000 12000 3500 --- 400 350 350 ---
Note. the values of ( ) are given for Fire resistant(FR) type cables.
44
45
46
Specifications subject to change without notice.
Hsinchuang PlantNo.397, Xinshu Road Xinzhuang District, New Taipei City,Taiwan, R.O.C.Postcode:24262Tel:+886-2-2202-9121Fax:+886-2-2202-5166