Post on 14-Apr-2018
7/27/2019 Shell Helix Ultra
1/2
September 2011
Shell Helix Ultra
Maximises performance right up to the next oil change
Shell Helix Ultra has been formulated with Shells ultimate active cleansing
technology. It works harder to protect than conventional motor oils bycontinuously helping to prevent dirt and sludge build-up, for betterresponsiveness and improved performance, thus helping your engine tooperate at its full potential right up to the next oil change.
Applications
Suitable for fuel-injected petrol engines fitted withblow-by-gas recirculation and catalytic convertersoperating in extreme driving conditions
Performance features and benefits
Shell's ultimate active cleansing technologyUp to five times more effective at removingsludge from dirty engines than a mineral oil
Long-term oxidation stabilityUp to 30% more protection than other fullysynthetic leading brands tested
Low viscosity, rapid oil flow and low frictionGreater fuel efficiency and easier coldstarting
High shear stabilityMaintains viscosity and stays in gradethroughout the oil-change interval.
Specially selected synthetic base oilsReduce oil volatility and therefore oilconsumption and the need for top-up
Minimises vibration and engine noiseSmoother, quieter drive
Health and safety
Shell Helix Ultra is unlikely to present anysignificant health or safety hazard when properlyused in the recommended application, and goodstandards of industrial and personal hygiene aremaintained.
Avoid contact with skin. Use impervious gloveswith used oil. After skin contact, washimmediately with soap and water.
For further guidance on product health and safetyrefer to the appropriate Shell product safety datasheet.
Protect the environmentTake used oil to an authorised collection point.Do not discharge into drains, soil or water.
Advice
Advice on applications not covered in this leafletmay be obtained from your Shell Representative.
7/27/2019 Shell Helix Ultra
2/2
September 2011
Specifications and approvals
Shell Helix Ultra 0W-40 5W-30 5W-40
API SN/CF Meets the engine testrequirements of API SN/CF.
SN/CF
ACEA A3/B3/B4 A3/B3/B4 A3/B3/B4
VW 502.00505.00
502.00505.00
502.00505.00
Mercedes-Benz 229.5 229.5 229.5
BMW LL-01 LL-01 LL-01
Other approvals or registrations Porsche Porsche A40Ferrari
Fiat (meets the requirements of) 9.55535 Z2
Renault RN 0700,RN0710
RN 0700, RN0710
Typical physical characteristics
Shell Helix Ultra 0W-40 5W-30 5W-40
SAE viscosity grade 0W-40 5W-30 5W-40
Kinematic viscosity (IP 71), cST@ 40C@ 100C
75.213.6
68.212.2
74.413.1
Density @ 15C (IP 365), kg/L 0.84 0.84 0.84Flash point (IP 34), C 215 215 215
Pour point (IP 15), C 42 39 39HTHS viscosity @ 150C, mPaS 3.68 3.50 3.68
These characteristics are typical. Whilst future production will conform to Shells specification, variations inthese characteristics may occur.