Post on 14-Feb-2018
Series description: Wilo-Star-Z
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 1 / 18
Wilo-Star-Z
0 0,5 1 2 3 4 Q[m³/h]0
1
2
3
4
H[m]
Star-Z 20/1
Star-Z 25/2 EM
Star-Z 25/2 DM
Star-Z 20/4
Star-Z 20/5 Star-Z 25/6
Star-Z 20/7
Star-Z 15 TT
DesignGlandless circulation pump with threaded connection
ApplicationPotable water circulation systems in industry and building services.Ce circulateur convient seulement pour l'eau potable.
Type keyExample: Wilo-Star-Z 20/1Wilo-Star-Z 15 TT
Star Standard pump
Z Circulation pump
20/ Nominal connection diameter
1 Nominal delivery head [m]
TTwith built-in time switch and temperature control(only Z 15 TT)
EM AC motor (1~)
DM Three phase motor (3~)
-3 3 speed stages
Special features/product advantagesAC pumps with electrical quick connection•All plastic parts that come into contact with the fluid fulfil KTWrecommendations
•
Thermal insulation as standard for StarZ 15 TT.•Star-Z 15 TT with integrated timer and thermostat, LC display withsymbolic language, red button technology and automatic detection ofthe thermal disinfection of the warm secondary hot water tank, as wellas ball shut-off valve on the suction side and non-return valve on thepressure side.
•
Technical dataConstant speed or, for StarZ...-3, three selectable speed stages•Fluid temperature:•
Potable water up to 3.21 mmol/l (18 °dH): max. +65°C, in short-term operation (2 h) up to +70°C
•
Mains connection 1~230 V, 50 Hz or, for StarZ 25/2 DM, 3~400 V, 50Hz
•
Protection class IP 44 (IP 42 for Star-Z 15 TT)•Nominal diameter Rp ½, Rp 1•Max. operating pressure 10 bar•
Equipment/functionOperating modes
Speed stage switching (StarZ -3 only)•Manual functions
Setting of the speed stages (1 speed stage, 3 speed stages with Star-Z...-3 pumps)
•
Automatic functionsTime switching function for programming of 3 switch-on or switch-offtimes (Z 15 TT only)
•
Temperature control for maintaining a constant return temperature inthe secondary hot water circulation system (Z 15 TT only)
•
Thermal disinfection routine (detection and support of thermaldisinfection of the warm secondary hot water tank) (only Z 15 TT)
•
Blocking protection (only Z 15 TT)•Signal and display functions
LCD screen for display of pump data and fault codes (Z 15 TT only)•Equipment
Wrench attachment point on the pump body (StarZ 25 only)•Cable inlet possible from both sides (StarZ 20/..., StarZ 25/... only)•Quick connection with spring clips•Blocking current-proof motor•Integrated non-return valve on the pressure side (only Star-Z 15 TT)•Integrated ball shut-off valve on suction side (only Star-Z 15 TT)•Including time switch (only Z 15 TT)•
MaterialsPump housing:•
Brass: Star-Z 15•Bronze: StarZ 20, Z 25•
Impeller: Plastic•Shaft:•
Stainless steel: Star-Z 15•Oxide ceramic: StarZ 20, Z 25•
Bearing: Carbon, synthetic resin impregnated•
Scope of deliveryPump•Including seals for threaded connection•Including installation and operating instructions•Including thermal insulation (Star-Z 15 TT only)•
AccessoriesScrewed connections•Adapter fittings•Thermal insulation shells for Star-Z 20, 25•Special brass inserted parts for screw-end pumps:Male thread/inner soldering connection
•
WiloS1Rh switchgear plug-in module for StarZ 20/1, Z 25/2 EM (single-phase version)
•
WiloSK 601N switchgear in connection with WiloSK 602N (ascontactor) for StarZ 25/2 DM (three-phase version)
•
Series description: Wilo-Star-Z
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 2 / 18
WiloSK 601N switchgear for timed On/Off switching for StarZ 20, 25•
Data sheet: Wilo-Star-Z 15 TT
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 3 / 18
Pump curves Single-phase current0 0,1 0,2 0,3 0,4 0,5 0,6
0 0,05 0,10 0,15 0,20 0,25 0,30
0 0,02 0,04 0,06 0,08
0 0,2 0,4 0,6 0,8 1,0
0
0,2
0,4
0,6
0,8
1,0
0 0,05 0,10 0,15 0,20 0,25 0,30
H[m]
P1[W]
Q[m³/ h]
Q[l/s]
Q[m³/ h]
Q[Igpm]
[m/s]
Wilo-Star-Z 15 TT1~230 V - Rp ½
0
4
8
12
16
20
Star-Z 15 TT
Dimension drawing A126,4
8,4
31
42
77
50
74
19
41
66
,35
13
8
Terminal diagram 1~230 V
L N PE
Blocking current-proof motorSingle-phase motor (EM) 2pole 1~230 V, 50 HzWith built-in capacitor
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
−
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
−
Potable water and water for food-processing companies in accordancewith TrinkwV 2001 (drinking waterordinance)
•
Permitted field of application
Temperature range at max. ambienttemperature of +25 °C
−
Temperature range at max. ambienttemperature +40 °C
−
Temperature range for applications insecondary hot water circulationsystems at maximum ambienttemperature of +40°C
2 - +65 °C
Temperature range forapplications in secondary hotwater circulation systems atmax. ambient temperature of+40 °C in short-term operation2 h
T 70 °C
Max. permitted total hardness inpotable water circulation systems
3.21 mmol/l (18 °dH)
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp ½
Thread G 1
Overall length L0 138 mm
Motor/electronics
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Protection class IP 42
Insulation class F
Mains connection 1~230 V, 50 Hz
Speed range n 1700-2700 rpm
Power consumption P1 max. 22 W
Current consumption I max. 0.25 A
Motor protection Not required (blocking-currentproof)
Data sheet: Wilo-Star-Z 15 TT
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 4 / 18
Threaded cable connection PG 1x9
Materials
Pump housing Brass (CuZn40Pb2)
Impeller Plastic (PPO)
Pump shaft Stainless steel (X35CrMo17)
Bearing Carbon, synthetic resinimpregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 40 / 65 / 110°C
0.5 / 2 / 0 m
Information for order placements
Make Wilo
Type Star-Z 15 TT
Art no. 4110919
Weight approx. m 2.330 kg
Data sheet: Wilo-Star-Z 20/1
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 5 / 18
Pump curves Single-phase current
P1
[W]
Q
H [
m]
0,50
00
0
[m 3/h]
[l/s]
[lgpm ]
[m 3/h]
[m/s]
0,2
v1,0
0,2
10
0,5 1,0 1,5
0,3
20
30
50
0,4
0,6
0,8
1,0
2 3 40
1,2
1
0,1
5
0,4
0
40
Wilo-Star-Z 20/11 ~ 230 V –
0,25 0,75 1,25
0,5 1,0 1,50,25 0,75 1,25
Rp½
Dimension drawing
76
14
0
96
78
70
G 1
93,5
101
PG 11
54
33
130
Terminal diagram 1~230 V
L N PE
Blocking current-proof motorSingle-phase motor (EM) 2pole 1~230 V, 50 HzWith built-in capacitor
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Potable water and water for food-processing companies in accordancewith TrinkwV 2001 (drinking waterordinance)
•
Permitted field of application
Temperature range at max. ambienttemperature of +25 °C
−
Temperature range at max. ambienttemperature +40 °C
−
Temperature range for applications insecondary hot water circulationsystems at maximum ambienttemperature of +40°C
2 - +65 °C
Temperature range forapplications in secondary hotwater circulation systems atmax. ambient temperature of+40 °C in short-term operation2 h
T 70 °C
Max. permitted total hardness inpotable water circulation systems
3.21 mmol/l (18 °dH)
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp ½
Thread G 1
Overall length L0 140 mm
Motor/electronics
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Protection class IP 44
Insulation class F
Mains connection 1~230 V, 50 Hz
Speed range n 1700-2700 rpm
Power consumption P1 36 - 38 W
Current consumption I max. 0.18 A
Motor protection Not required (blocking-currentproof)
Data sheet: Wilo-Star-Z 20/1
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 6 / 18
Threaded cable connection PG 1x11
Materials
Pump housing Red brass (CC 499K) accordingto DIN 50930-6 in accordancewith Drinking Water Ordinance
Impeller Plastic (PPO)
Pump shaft Oxide ceramic, brown (Al2O3)
Bearing Carbon, synthetic resinimpregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 40 / 65 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Star-Z 20/1
Art no. 4028111
Weight approx. m 2.240 kg
Data sheet: Wilo-Star-Z 25/2 EM
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 7 / 18
Pump curves Single-phase current
P1 [
W]
Q
H [
m]
0,50
00
0
[m 3/h]
[l/s]
[lgpm ]
[m 3/h]
0,5
[m/s]
0,5
v1,0
0,25
1,5 2,0 2,5
0,5
40
60
80
1,0
2,5
3,0
4,0
2,5 5,0 7,5
1,0 3,0 3,5
0,75
10
1,0
12,50
1,5
1,5
2,0
20
0 0,5 1,5 2,0 2,51,0 3,0 3,5
Wilo-Star -Z 25/2
1 ~ 230 V – Rp 13,5
Dimension drawing
76
18
0
96
78
90
G 1½
93,5
101
PG 11
54
34
130
Terminal diagram 1~230 V
L N PE
Blocking current-proof motorSingle-phase motor (EM) 2pole 1~230 V, 50 HzWith built-in capacitor
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Potable water and water for food-processing companies in accordancewith TrinkwV 2001 (drinking waterordinance)
•
Permitted field of application
Temperature range at max. ambienttemperature of +25 °C
−
Temperature range at max. ambienttemperature +40 °C
−
Temperature range for applications insecondary hot water circulationsystems at maximum ambienttemperature of +40°C
2 - +65 °C
Temperature range forapplications in secondary hotwater circulation systems atmax. ambient temperature of+40 °C in short-term operation2 h
T 70 °C
Max. permitted total hardness inpotable water circulation systems
3.21 mmol/l (18 °dH)
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp 1
Thread G 1½
Overall length L0 180 mm
Motor/electronics
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Protection class IP 44
Insulation class F
Mains connection 1~230 V, 50 Hz
Speed range n 1700-2700 rpm
Power consumption P1 max. 46 W
Current consumption I max. 0.22 A
Motor protection Not required (blocking-currentproof)
Data sheet: Wilo-Star-Z 25/2 EM
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 8 / 18
Threaded cable connection PG 1x11
Materials
Pump housing Red brass (CC 499K) accordingto DIN 50930-6 in accordancewith Drinking Water Ordinance
Impeller Plastic (PPO)
Pump shaft Oxide ceramic, brown (Al2O3)
Bearing Carbon, synthetic resinimpregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 40 / 65 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Star-Z 25/2 EM
Art no. 4029062
Weight approx. m 2.440 kg
Data sheet: Wilo-Star-Z 25/2 DM
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 9 / 18
Pump curves Three-phase current
P1 [
W]
Q
H [
m]
0,50
00
0
[m 3/h]
[l/s]
[lgpm ]
[m 3/h]
0,5
[m/s]
0,5
v1,0
0,25
1,5 2,0 2,5
0,5
60
80
100
1,0
2,5
3,0
4,0
2,5 5,0 7,5
1,0 3,0 3,5
0,75
10
1,0
12,50
1,5
1,5
2,0
3,5
40
0 0,5 1,5 2,0 2,51,0 3,0 3,5
Wilo-Star -Z 25/2
3 ~ 400 V – Rp 1
Dimension drawing
79
18
0
96
78
90
G 1½
93,5
101
PG 11
54
33
130
Terminal diagram 3~400 VL1 L3PE L 2
Three-phase AC motor (DM), 2-pole- 3~400 V, 50 Hz
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Potable water and water for food-processing companies in accordancewith TrinkwV 2001 (drinking waterordinance)
•
Permitted field of application
Temperature range at max. ambienttemperature of +25 °C
−
Temperature range at max. ambienttemperature +40 °C
−
Temperature range for applications insecondary hot water circulationsystems at maximum ambienttemperature of +40°C
2 - +65 °C
Temperature range forapplications in secondary hotwater circulation systems atmax. ambient temperature of+40 °C in short-term operation2 h
T 70 °C
Max. permitted total hardness inpotable water circulation systems
3.21 mmol/l (18 °dH)
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp 1
Thread G 1½
Overall length L0 180 mm
Motor/electronics
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Protection class IP 44
Insulation class F
Mains connection 3~400 V, 50 Hz
Speed range n 1700-2700 rpm
Power consumption P1 55 - 72 W
Current consumption I max. 0.16 A
Motor protection Not required (blocking-currentproof)
Data sheet: Wilo-Star-Z 25/2 DM
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 10 / 18
Threaded cable connection PG 1x11
Materials
Pump housing Red brass (CC 499K) accordingto DIN 50930-6 in accordancewith Drinking Water Ordinance
Impeller Plastic (PPO)
Pump shaft Oxide ceramic, brown (Al2O3)
Bearing Carbon, synthetic resinimpregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 40 / 65 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Star-Z 25/2 DM
Art no. 4037124
Weight approx. m 2.620 kg
Data sheet: Wilo-Star-Z 25/6-3
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 11 / 18
Pump curves Single-phase current
110
100
90
80
70
60
50
40
0 0,25 0,5 0,75 1 1,25
0 2,5 5 7,5 10 12,5 15
0 0,5 1,0 1,5 2,0 2,5
0 1 2 3 4
v [m/s]
P1 [
W]
H [
m]
Q
[m3/h]
[lgpm]
6
5
4
3
2
1
0
[l/s]
Wilo-Star-Z 25/61 ~ 230 V - Rp 1
[m3/h]0 1 2 3 4
max.
max.
min
min
Dimension drawing
G 1½
Pg 11
18
0
90
93,5
101
79
54
33 96
78
Terminal diagram 1~230 V
L N PE
Blocking current-proof motorSingle-phase motor (EM) 2pole 1~230 V, 50 HzWith built-in capacitor
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Potable water and water for food-processing companies in accordancewith TrinkwV 2001 (drinking waterordinance)
•
Permitted field of application
Temperature range at max. ambienttemperature of +25 °C
−
Temperature range at max. ambienttemperature +40 °C
−
Temperature range for applications insecondary hot water circulationsystems at maximum ambienttemperature of +40°C
2 - +65 °C
Temperature range forapplications in secondary hotwater circulation systems atmax. ambient temperature of+40 °C in short-term operation2 h
T 70 °C
Max. permitted total hardness inpotable water circulation systems
3.21 mmol/l (18 °dH)
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp 1
Thread G 1½
Overall length L0 180 mm
Motor/electronics
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Protection class IP 44
Insulation class F
Mains connection 1~230 V, 50 Hz
Speed range n 1700-2700 rpm
Power consumption P1 49 / 74 / 99 W
Current consumption I 0.22 - 0.43 A
Motor protection Not required (blocking-currentproof)
Data sheet: Wilo-Star-Z 25/6-3
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 12 / 18
Threaded cable connection PG 1x11
Materials
Pump housing Red brass (CC 499K) accordingto DIN 50930-6 in accordancewith Drinking Water Ordinance
Impeller Plastic (PPO)
Pump shaft Oxide ceramic, brown (Al2O3)
Bearing Carbon, synthetic resinimpregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 40 / 65 / 110°C
0.5 / 3 / 10 m
Information for order placements
Make Wilo
Type Star-Z 25/6-3
Art no. 4047573
Weight approx. m 2.660 kg
Data sheet: Wilo-Star-Z 20/4-3
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 13 / 18
Pump curves Single-phase current
Q
Wilo-Star-Z 20 / 4 1~230 V - 50Hz
0 1,0 2,0 3,0
0 0,25 0,750,5 1,0 [l/s]
[m3/h]
0 1,0 2,0 3,0 [m3/h]
v
0,50 1,0 1,5 2,0 [m/s]
20
40
60
80
P1[W
]
0
1
2
3
4
5
H [m
]
max.
min.
min.
max.
Dimension drawing
76
15
0
96
78
75
G 1¼
93,5
101
PG 11
54
32
130
Terminal diagram 1~230 V
L N PE
Blocking current-proof motorSingle-phase motor (EM) 2pole 1~230 V, 50 HzWith built-in capacitor
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Potable water and water for food-processing companies in accordancewith TrinkwV 2001 (drinking waterordinance)
•
Permitted field of application
Temperature range at max. ambienttemperature of +25 °C
•-10...+110
Temperature range at max. ambienttemperature +40 °C
•-10...+95 °C
Temperature range for applications insecondary hot water circulationsystems at maximum ambienttemperature of +40°C
0.0 - +65 °C
Temperature range forapplications in secondary hotwater circulation systems atmax. ambient temperature of+40 °C in short-term operation2 h
T 70 °C
Max. permitted total hardness inpotable water circulation systems
3.21 mmol/l (18 °dH)
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp ½
Thread G 1¼
Overall length L0 150 mm
Motor/electronics
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Protection class IP 44
Insulation class F
Mains connection 1~230 V, 50 Hz
Speed range n 1700-2600 rpm
Power consumption P1 29 - 71 W
Current consumption I max. 0.31 A
Motor protection Not required (blocking-currentproof)
Data sheet: Wilo-Star-Z 20/4-3
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 14 / 18
Threaded cable connection PG 1x11
Materials
Pump housing Red brass (CC 491K) accordingto DIN 50930-6 in accordancewith Drinking Water Ordinance)
Impeller Plastic (PPO)
Pump shaft Oxide ceramic, brown (Al2O3)
Bearing Carbon, synthetic resinimpregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 40 / 65 / 110°C
0 / 3 / 10 m
Information for order placements
Make Wilo
Type Star-Z 20/4-3
Art no. 4081193
Weight approx. m 2.360 kg
Data sheet: Wilo-Star-Z 20/5-3
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 15 / 18
Pump curves Single-phase current
Wilo-Star-Z 20 / 5 1~230 V - 50Hz
Q
0 1,0 2,0 3,0 4,0
0 0,25 0,750,5 1,0 1,25 [l/s]
[m3/h]
0 1,0 2,0 3,0 4,0 [m3/h]
v
0,50 1,0 1,5 2,0 2,5 [m/s]
20
40
60
80
100
P1[W
]
0
1
2
3
4
5
H [m
]
max.
min.
min.
max.
Dimension drawing
79
15
0
96
78
75
G 1¼
93,5
101
PG 11
54
33
130
Terminal diagram 1~230 V
L N PE
Blocking current-proof motorSingle-phase motor (EM) 2pole 1~230 V, 50 HzWith built-in capacitor
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Potable water and water for food-processing companies in accordancewith TrinkwV 2001 (drinking waterordinance)
•
Permitted field of application
Temperature range at max. ambienttemperature of +25 °C
•-10...+110
Temperature range at max. ambienttemperature +40 °C
•-10...+95 °C
Temperature range for applications insecondary hot water circulationsystems at maximum ambienttemperature of +40°C
0.0 - +65 °C
Temperature range forapplications in secondary hotwater circulation systems atmax. ambient temperature of+40 °C in short-term operation2 h
T 70 °C
Max. permitted total hardness inpotable water circulation systems
3.21 mmol/l (18 °dH)
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp ½
Thread G 1¼
Overall length L0 150 mm
Motor/electronics
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Protection class IP 44
Insulation class F
Mains connection 1~230 V, 50 Hz
Speed range n 2000-2600 rpm
Power consumption P1 43 - 93 W
Current consumption I max. 0.40 A
Motor protection Not required (blocking-currentproof)
Data sheet: Wilo-Star-Z 20/5-3
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 16 / 18
Threaded cable connection PG 1x11
Materials
Pump housing Red brass (CC 491K) accordingto DIN 50930-6 in accordancewith Drinking Water Ordinance)
Impeller Plastic (PPO)
Pump shaft Oxide ceramic, brown (Al2O3)
Bearing Carbon, synthetic resinimpregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 40 / 65 / 110°C
0 / 3 / 10 m
Information for order placements
Make Wilo
Type Star-Z 20/5-3
Art no. 4081198
Weight approx. m 2.510 kg
Data sheet: Wilo-Star-Z 20/7-3
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 17 / 18
Pump curves Single-phase currentv
50
70
90
110
130
150
0
1
2
3
4
5
6
7
0 1,0 2,0 3,0 4,0
0 0,4 0,8 1,5
5,0
Wilo-Star-Z 20 / 7 1~230 V - 50Hz
Q
0,50 1,0 1,5 2,0 2,5 3,0
min.
max.
[l/s]
[m3/h]
0 1,0 2,0 3,0 4,0 5,0 [m3/h]
[m/s]
max.
min.
P1[W
]H
[m
]
Dimension drawing
79
15
0
109
91
75
G 1¼
93,5
101
PG 11
54
30
130
Terminal diagram 1~230 V
L N PE
Blocking current-proof motorSingle-phase motor (EM) 2pole 1~230 V, 50 HzWith built-in capacitor
Approved fluids (other fluids on request)
Heating water (in accordance with VDI2035)
•
Water-glycol mixtures (max. 1:1; above20% admixture, the pumping datamust be checked)
•
Potable water and water for food-processing companies in accordancewith TrinkwV 2001 (drinking waterordinance)
•
Permitted field of application
Temperature range at max. ambienttemperature of +25 °C
•-10...+110
Temperature range at max. ambienttemperature +40 °C
•-10...+95 °C
Temperature range for applications insecondary hot water circulationsystems at maximum ambienttemperature of +40°C
0.0 - +65 °C
Temperature range forapplications in secondary hotwater circulation systems atmax. ambient temperature of+40 °C in short-term operation2 h
T 70 °C
Max. permitted total hardness inpotable water circulation systems
3.21 mmol/l (18 °dH)
Maximum permissibleoperating pressure
Pmax 10 bar
Pipe connections
Threaded pipe union Rp ½
Thread G 1¼
Overall length L0 150 mm
Motor/electronics
Emitted interference EN 61000-6-3
Interference resistance EN 61000-6-2
Protection class IP 44
Insulation class F
Mains connection 1~230 V, 50 Hz
Speed range n 2000-2700 rpm
Power consumption P1 52 - 146 W
Current consumption I max. 0.65 A
Motor protection Not required (blocking-currentproof)
Data sheet: Wilo-Star-Z 20/7-3
Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 18 / 18
Threaded cable connection PG 1x11
Materials
Pump housing Red brass (CC 491K) accordingto DIN 50930-6 in accordancewith Drinking Water Ordinance)
Impeller Plastic (PPO)
Pump shaft Oxide ceramic, brown (Al2O3)
Bearing Carbon, synthetic resinimpregnated
Minimum suction head at suction port for avoidingcavitation at water pumping temperature
Minimum suction head at 40 / 65 / 110°C
0 / 3 / 10 m
Information for order placements
Make Wilo
Type Star-Z 20/7-3
Art no. 4081203
Weight approx. m 2.90 kg