CBAS Belt Alignment Switch& CPS Cable Pull Switch

The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc.

©Copyright 2011 Dwyer Instruments, Inc

Typical Conveyor Application

CBAS Features

2 adjustable actuation angles (factory set at 20⁰ and 35⁰)Roller arm can rotate up to 75⁰Integral cover, permits easy access to the wiring terminals and adjustments.2 SPDT switches NEMA 6 (IP 67)

CPS Features

Highly visible red flag for switch statusIntegral cover, permits easy access to the wiring terminals.Manual reset2 SPDT switches NEMA 6 (IP 67)

CBAS Construction

CBAS Installation

CPS Construction

CPS Installation

Types of conveyors that use CBAS and CPS

Conventional Belt Conveyors

Shuttle Conveyor

Stacker Conveyors

Apron Feeder Conveyors

Tripper Conveyors

Questions

To order a free catalog or for more information contact;Dwyer Instruments, Inc., P.O. Box 373,

Michigan City, IN., 46361Telephone: (800) 872-9141 or (219) 879-8000

Fax: (219) 872-9057Internet address: www.dwyer-inst.com

E-mail: info@dwyer-inst.com