Post on 20-Feb-2021
2.5 mm 13 mm16 mm
0.5 x 3 mm PZ 5
Contents
Required tools
Assembly
1 mm3
L1V30606645003-01 | 01
3KL83...-.. (200A-400A)3KA83...-.. (200A-400A)
IEC 60947-1IEC 60947-3
Hazardous voltage will cause death or serious injury. Turn off andlock out all power supplying this device before working on this device.Replace all covers before power supplying this device is turned on.
Installation & Maintenace must be carried out by qualified personnel.
NOTICE
DANGEREN !
2P: 2x3P: 3x4P: 4x
1x 1x
2P: 4x3P: 6x4P: 8x
3K.83..M10X303K.83..-5M10X30
Permissible mounting position
Drilling Plan for mounting plate
2P/3P/4P : M8 x 20 (4x)Torque 10....14 Nm(Not in scope of supply)
M8 (4x) 15 A
Center ofShaft
For 3KL8
SENTRON SUPERSWITCHSwitch Disconnector Fuse - Size 3
Mounting Details:
Last Update: June 2020
Connection
Assembly
1 mm6
1 mm6
1
2.5 mm
L1V30606645003-01 | 02
Provision for Fuse monitoring
3KL831.../3KA831.... 3KL832.../3KA832....3KL833... Max. Lug Size.... 185 mm2 M10 x 30Torque 20 Nm to 28 Nm
3KL834.../3KA834....Max. Lug Size.... 2X120 mm M10 x 30Torque 20 Nm to 28 Nm
3KL83...5.../3KA83....5_Netrual Link Max. Lug Size.... 120 mm M10 x 30 Torque 10 Nm to 28 Nm
Installation of Shaft
2.5 mm
PZ 5
1 2 3 1 2 3 4 1 2 3 4 5
Assembly
Assembly
L1V30606645003-01 | 03
Adjust Depth of Drive as per dimensional plan
2P : Phase Barrier in position 1 & 2 are essential
3P : Phase Barrier in position 1, 2 & 3 are essential
4P : Phase Barrier in position 1, 2, 3 & 4 are essential
PZ5 x 13.52.1...2.4Nm
Coupler
7 1
45.5 1
8UC Coupler depth adjustmentUse Depth Setting Templet - 8UC6046-2
8UC 3K
Panel Door1.5....4Thk
285...310
Phase Barrier:3KX83430AE
Mounting Details for Front Drive8UC6314-1BB00
0.5 x 3 mm
0.5 x 3 mm
Assembly
L1V30606645003-01 | 04
2P : 3KX83410AF3P : 3KX83410AE4P : 3KX83410AG
2P : 3KX83460AF3P : 3KX83460AE4P : 3KX83460AG
Terminal cover
Rear cover
Rear Phase Barrier Kit2P/3P/4P : 3KX83469AE
1 2 3 1 2 3 4 1 2 3 4 5
0.5 x 3 mm
2.5 mm
0.5 x 3 mm
0.5 x 3 mm
2.5 mm
Assembly
Assembly
L1V30606645003-01 | 05
2P:3KX83400AF3P:3KX83400AE4P:3KX83400AG
2P/3P/4P : Replace phase barrier in position 1 with Fuse Cover Phase Barrier2P : Add Fuse Cover Phase Barrier in position 33P : Add Fuse Cover Phase Barrier in position 44P : Add Fuse Cover Phase Barrier in position 5
3KX35521YC3KX35521YD
Fuse Cover Phase Barrier Kit3KX83409AE
Fuse Cover:
Mounting Aux. Switch
Informationi i
Informationi i
L1V30606645003-01 | 06
40 40360
TERMINALTERMINAL
COVER
PHASEBARRIER
FUSECOVER
INTERLOCKINGLEVER
AUXLIARYSWITCH
NEUTRALLINK
OFF POSITIONINDICATOR
3 THICK310 13.2 25
32.5 A287...313
22295
55.2 70 70 M10 M10
65 B
C
240 380
Dimension Details for SDF in Enclosure
Overall Dimensional details3KL8/3KA8 : 3P(3KL8)/3P+N
3KL8/3KA8 : 2P 3KL8/3KA8 : 4P
For missing Dimension refer 3P/3P+N For missing Dimension refer 3P/3P+N
Note : Cut supplied shaft by 54mm for use with Enclosure
D E
12.5