Post on 01-May-2018
Capital Safety - USA: 800 328 6146Canada: 800 387 7484 Latin America: +1 651 385 4301 Asia: +65 65587758 Germany: +49 (0)30 92 03 83 87 00New Zealand: 0800 212 505 Australia: 1800 245 002Europe, Middle East, Africa: +33 (0)4 97 10 00 10Northern Europe: +44 (0)1527 548000www.capitalsafety.com info@capitalsafety.com
©2011, Capital Safety Form: 9700545 rev: D T H E U LT I M AT E I N F A L L P R O T E C T I O N PRODUCT SHEET
NANO-LOK™
SELF RETRACTING LIFELINESNANO-LOK™ LIFELINE HOOK OPTIONS
NANO-LOK™
ANCHOR OPTIONS
ASTANDARD STEELSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
ASTANDARD STEELSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
EVERY NANO-LOK™ HAS AN INTEGRATED ANCHORAGE LOOP TO ATTACHAN ANCHORAGE OPTION FROM BELOW, OR USE YOUR OWN CARABINER.
H3100088—SINGLE LEG CONNECTOR*Triple-action open/close, zinc-plated steel.
* For use only with Nano-Lok™
BFLAT STEELREBAR HOOK2-1/2” (62.5 mm) gate opening—3,600 lb. (16kN) gate strength.
BFLAT STEELREBAR HOOK2-1/2” (62.5 mm) gate opening—3,600 lb. (16kN) gate strength.
I3100087—TWIN LEG CONNECTOR*Self locking/closing gate, 3/4” (19 mm) opening.
EALUMINUM CARABINER (CAPTIVE EYE)3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
DSTEEL SWIVELINGSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
G3100089—CAB MOUNT*Stainless steel bracket with 1.63” (41.4 mm) wide opening by 4.25” (108 mm) tall.
CALUMINUMREBAR HOOK2-1/4” (57 mm) gate opening—3,600 lb. (16kN) gate strength.
CALUMINUMREBAR HOOK2-1/4” (57 mm) gate opening—3,600 lb. (16kN) gate strength.
FALUMINUMSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
J3100107—TWIN LEG CONNECTOR—FIXED*Triple locking gate, 3/4” (19 mm) opening, required for ExoFit™ andother “fixed” D-ring harnesses.
K2000112—Saflok™ STEEL CARABINER11/16” (17.4 mm) gate opening—3,600 lb. (16kN) gate strength.
L2000025—ALUMINUM CARABINER3/4” (19 mm) gate opening—3,600 lb.(16kN) gate strength.
ONLY 1.6POUNDS!
PATENTS APPLIED FOR
Scan this QR code with your smart phone to learn more about NANO-LOK™!
Model Shown 3101211
MODEL # 3101241
MODEL # 3101240
COMPACT.VERSATILE.SAFE.REPLACE YOUR LANYARD TOREDUCE FALL DISTANCE ANDIMPROVE SAFETY.
NANO-LOK™
SELF RETRACTING LIFELINES
NANO-LOK™
FEATURES
SINGLE LEG CONNECTOR
STEP ONE:Open connector by pushing down on the two locking buttons & sliding pin out.
STEP TWO:Slide connector through loosened web straps below back D-ring, then pull straps tight.
STEP THREE:Slide swivel eye on SRL over the connector pin & push-in until it locks.
TWIN LEG CONNECTORSTEP ONE:Open connector by pushing up plastic insert & carabiner gate inward. Insert nose of carabiner through swivel eye on SRL & rotate to the other side.
STEP THREE:Close connector carabiner & rotate the plastic insert down to secure making sure the web straps pass throughthe slot on the insert.
STEP TWO:Slide nose end of carabiner behind loosened web straps below back D-ring & install second SRL.
NOTE: Refer to user instructionmanual for complete details. NOTE: Refer to user instruction manual for complete details.
Equipped with
Model Shown 3101225
Model Shown 3101277
100% TIE-OFF CONFIGURATION• Provides continuous fall protection & added mobility when moving from one location to another• Replaces twin-leg lanyard & improves safety
NOTE: Optional twin leg fixed anchorage connectoravailable for ExoFit™ & other fixed D-ring harnesses
TWIN LEG ANCHORAGE CONNECTOR• Attach two SRLs directly to back of most harnesses• Installs to web, leaves dorsal D-ring open for other equipment or rescue• Design provides snug fit to worker’s back— eliminates nuisance “flopping”• Interchangeable SRLs allow for added versatility & replacement options
• SINGLE LEG ANCHORAGE CONNECTOR • Attaches directly to back of most harnesses—no separate carabiner required • Installs to web, leaving dorsal D-ring open for other equipment or rescue • Design provides snug fit to worker’s back—eliminates nuisance “flopping”
EXTREMELY COMPACT & LIGHTWEIGHTAt just 1.6 lbs., this SRL is the lightest, most compact uniton the market in its class —15% lighter & 30% smaller
• SWIVELING ANCHORAGE LOOP Limits lifeline twisting for smoother operation
• RETRACTABLE LIFELINE 6-ft. lifeline provides continuous fall protection without restrictions — keeps lifeline out of worker’s way, reducing dragging, snagging & trip falls
• i-Safe™ EQUIPPED Helps track equipment & manage safety inspection programs
• AUTOMATIC QUICK-ACTIVATING ARRESTOR • Stops falling worker within inches—reduces fall distances & average arresting forces to 900 lbs. or less • Replaces lanyard & improves safety
• IMPACT-RESISTANT HOUSING High-strength housing provides maximum durability
• IMPACT INDICATOR Integrated shock absorber provides visual indication of a fall
WIDE VARIETY OF CONFIGURATIONSProvides complete jobsite versatility & flexibility
420 LB. WEIGHT CAPACITYHigher capacity for operator & tools
• 3,600 LB. GATE Reduces chances of accidental disengagement (roll-out) for added safety
MEETS OR EXCEEDS INDUSTRY STANDARDS:U.S. Models: OSHA 1926.502, 1910.66; ANSI Z359-2007 & A10.32Canada Models: CSA Z259.2.2-98
COMPACTNano-Lok™ is ergonomically designed for ease-
of-use and is ideal for direct connection to most
harnesses. At only 1.6 lbs., it’s virtually unnoticeable
on your back, stays out of the way and can be easily
used as a lanyard replacement.
VERSATILEWhether your application requires single or twin
leg configurations, mounting to an overhead anchor
or for connection directly to a harness, there are
more than 30 models to choose from to suit almost
any application.
SAFENano-Lok™ locks quickly—stopping a fall within
inches—providing more protection at low heights.
In addition, tension is always kept on the lifeline,
which reduces dragging, snagging and trip falls.
Both features are key safety improvements.
MAINTAIN SAFEFALL DISTANCESFOR IMPROVED WORKER SAFETYDBI-SALA™, your trusted source for fall protection,
introduces the smart new Nano-Lok™ SRL.
NANO-LOK™
SELF RETRACTING LIFELINES
NANO-LOK™
FEATURES
SINGLE LEG CONNECTOR
STEP ONE:Open connector by pushing down on the two locking buttons & sliding pin out.
STEP TWO:Slide connector through loosened web straps below back D-ring, then pull straps tight.
STEP THREE:Slide swivel eye on SRL over the connector pin & push-in until it locks.
TWIN LEG CONNECTORSTEP ONE:Open connector by pushing up plastic insert & carabiner gate inward. Insert nose of carabiner through swivel eye on SRL & rotate to the other side.
STEP THREE:Close connector carabiner & rotate the plastic insert down to secure making sure the web straps pass throughthe slot on the insert.
STEP TWO:Slide nose end of carabiner behind loosened web straps below back D-ring & install second SRL.
NOTE: Refer to user instructionmanual for complete details. NOTE: Refer to user instruction manual for complete details.
Equipped with
Model Shown 3101225
Model Shown 3101277
100% TIE-OFF CONFIGURATION• Provides continuous fall protection & added mobility when moving from one location to another• Replaces twin-leg lanyard & improves safety
NOTE: Optional twin leg fixed anchorage connectoravailable for ExoFit™ & other fixed D-ring harnesses
TWIN LEG ANCHORAGE CONNECTOR• Attach two SRLs directly to back of most harnesses• Installs to web, leaves dorsal D-ring open for other equipment or rescue• Design provides snug fit to worker’s back— eliminates nuisance “flopping”• Interchangeable SRLs allow for added versatility & replacement options
• SINGLE LEG ANCHORAGE CONNECTOR • Attaches directly to back of most harnesses—no separate carabiner required • Installs to web, leaving dorsal D-ring open for other equipment or rescue • Design provides snug fit to worker’s back—eliminates nuisance “flopping”
EXTREMELY COMPACT & LIGHTWEIGHTAt just 1.6 lbs., this SRL is the lightest, most compact uniton the market in its class —15% lighter & 30% smaller
• SWIVELING ANCHORAGE LOOP Limits lifeline twisting for smoother operation
• RETRACTABLE LIFELINE 6-ft. lifeline provides continuous fall protection without restrictions — keeps lifeline out of worker’s way, reducing dragging, snagging & trip falls
• i-Safe™ EQUIPPED Helps track equipment & manage safety inspection programs
• AUTOMATIC QUICK-ACTIVATING ARRESTOR • Stops falling worker within inches—reduces fall distances & average arresting forces to 900 lbs. or less • Replaces lanyard & improves safety
• IMPACT-RESISTANT HOUSING High-strength housing provides maximum durability
• IMPACT INDICATOR Integrated shock absorber provides visual indication of a fall
WIDE VARIETY OF CONFIGURATIONSProvides complete jobsite versatility & flexibility
420 LB. WEIGHT CAPACITYHigher capacity for operator & tools
• 3,600 LB. GATE Reduces chances of accidental disengagement (roll-out) for added safety
MEETS OR EXCEEDS INDUSTRY STANDARDS:U.S. Models: OSHA 1926.502, 1910.66; ANSI Z359-2007 & A10.32Canada Models: CSA Z259.2.2-98
COMPACTNano-Lok™ is ergonomically designed for ease-
of-use and is ideal for direct connection to most
harnesses. At only 1.6 lbs., it’s virtually unnoticeable
on your back, stays out of the way and can be easily
used as a lanyard replacement.
VERSATILEWhether your application requires single or twin
leg configurations, mounting to an overhead anchor
or for connection directly to a harness, there are
more than 30 models to choose from to suit almost
any application.
SAFENano-Lok™ locks quickly—stopping a fall within
inches—providing more protection at low heights.
In addition, tension is always kept on the lifeline,
which reduces dragging, snagging and trip falls.
Both features are key safety improvements.
MAINTAIN SAFEFALL DISTANCESFOR IMPROVED WORKER SAFETYDBI-SALA™, your trusted source for fall protection,
introduces the smart new Nano-Lok™ SRL.
NANO-LOK™
SELF RETRACTING LIFELINES
NANO-LOK™
FEATURES
SINGLE LEG CONNECTOR
STEP ONE:Open connector by pushing down on the two locking buttons & sliding pin out.
STEP TWO:Slide connector through loosened web straps below back D-ring, then pull straps tight.
STEP THREE:Slide swivel eye on SRL over the connector pin & push-in until it locks.
TWIN LEG CONNECTORSTEP ONE:Open connector by pushing up plastic insert & carabiner gate inward. Insert nose of carabiner through swivel eye on SRL & rotate to the other side.
STEP THREE:Close connector carabiner & rotate the plastic insert down to secure making sure the web straps pass throughthe slot on the insert.
STEP TWO:Slide nose end of carabiner behind loosened web straps below back D-ring & install second SRL.
NOTE: Refer to user instructionmanual for complete details. NOTE: Refer to user instruction manual for complete details.
Equipped with
Model Shown 3101225
Model Shown 3101277
100% TIE-OFF CONFIGURATION• Provides continuous fall protection & added mobility when moving from one location to another• Replaces twin-leg lanyard & improves safety
NOTE: Optional twin leg fixed anchorage connectoravailable for ExoFit™ & other fixed D-ring harnesses
TWIN LEG ANCHORAGE CONNECTOR• Attach two SRLs directly to back of most harnesses• Installs to web, leaves dorsal D-ring open for other equipment or rescue• Design provides snug fit to worker’s back— eliminates nuisance “flopping”• Interchangeable SRLs allow for added versatility & replacement options
• SINGLE LEG ANCHORAGE CONNECTOR • Attaches directly to back of most harnesses—no separate carabiner required • Installs to web, leaving dorsal D-ring open for other equipment or rescue • Design provides snug fit to worker’s back—eliminates nuisance “flopping”
EXTREMELY COMPACT & LIGHTWEIGHTAt just 1.6 lbs., this SRL is the lightest, most compact uniton the market in its class —15% lighter & 30% smaller
• SWIVELING ANCHORAGE LOOP Limits lifeline twisting for smoother operation
• RETRACTABLE LIFELINE 6-ft. lifeline provides continuous fall protection without restrictions — keeps lifeline out of worker’s way, reducing dragging, snagging & trip falls
• i-Safe™ EQUIPPED Helps track equipment & manage safety inspection programs
• AUTOMATIC QUICK-ACTIVATING ARRESTOR • Stops falling worker within inches—reduces fall distances & average arresting forces to 900 lbs. or less • Replaces lanyard & improves safety
• IMPACT-RESISTANT HOUSING High-strength housing provides maximum durability
• IMPACT INDICATOR Integrated shock absorber provides visual indication of a fall
WIDE VARIETY OF CONFIGURATIONSProvides complete jobsite versatility & flexibility
420 LB. WEIGHT CAPACITYHigher capacity for operator & tools
• 3,600 LB. GATE Reduces chances of accidental disengagement (roll-out) for added safety
MEETS OR EXCEEDS INDUSTRY STANDARDS:U.S. Models: OSHA 1926.502, 1910.66; ANSI Z359-2007 & A10.32Canada Models: CSA Z259.2.2-98
COMPACTNano-Lok™ is ergonomically designed for ease-
of-use and is ideal for direct connection to most
harnesses. At only 1.6 lbs., it’s virtually unnoticeable
on your back, stays out of the way and can be easily
used as a lanyard replacement.
VERSATILEWhether your application requires single or twin
leg configurations, mounting to an overhead anchor
or for connection directly to a harness, there are
more than 30 models to choose from to suit almost
any application.
SAFENano-Lok™ locks quickly—stopping a fall within
inches—providing more protection at low heights.
In addition, tension is always kept on the lifeline,
which reduces dragging, snagging and trip falls.
Both features are key safety improvements.
MAINTAIN SAFEFALL DISTANCESFOR IMPROVED WORKER SAFETYDBI-SALA™, your trusted source for fall protection,
introduces the smart new Nano-Lok™ SRL.
Capital Safety - USA: 800 328 6146Canada: 800 387 7484 Latin America: +1 651 385 4301 Asia: +65 65587758 Germany: +49 (0)30 92 03 83 87 00New Zealand: 0800 212 505 Australia: 1800 245 002Europe, Middle East, Africa: +33 (0)4 97 10 00 10Northern Europe: +44 (0)1527 548000www.capitalsafety.com info@capitalsafety.com
©2011, Capital Safety Form: 9700545 rev: D T H E U LT I M AT E I N F A L L P R O T E C T I O N PRODUCT SHEET
NANO-LOK™
SELF RETRACTING LIFELINESNANO-LOK™ LIFELINE HOOK OPTIONS
NANO-LOK™
ANCHOR OPTIONS
ASTANDARD STEELSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
ASTANDARD STEELSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
EVERY NANO-LOK™ HAS AN INTEGRATED ANCHORAGE LOOP TO ATTACHAN ANCHORAGE OPTION FROM BELOW, OR USE YOUR OWN CARABINER.
H3100088—SINGLE LEG CONNECTOR*Triple-action open/close, zinc-plated steel.
* For use only with Nano-Lok™
BFLAT STEELREBAR HOOK2-1/2” (62.5 mm) gate opening—3,600 lb. (16kN) gate strength.
BFLAT STEELREBAR HOOK2-1/2” (62.5 mm) gate opening—3,600 lb. (16kN) gate strength.
I3100087—TWIN LEG CONNECTOR*Self locking/closing gate, 3/4” (19 mm) opening.
EALUMINUM CARABINER (CAPTIVE EYE)3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
DSTEEL SWIVELINGSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
G3100089—CAB MOUNT*Stainless steel bracket with 1.63” (41.4 mm) wide opening by 4.25” (108 mm) tall.
CALUMINUMREBAR HOOK2-1/4” (57 mm) gate opening—3,600 lb. (16kN) gate strength.
CALUMINUMREBAR HOOK2-1/4” (57 mm) gate opening—3,600 lb. (16kN) gate strength.
FALUMINUMSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
J3100107—TWIN LEG CONNECTOR—FIXED*Triple locking gate, 3/4” (19 mm) opening, required for ExoFit™ andother “fixed” D-ring harnesses.
K2000112—Saflok™ STEEL CARABINER11/16” (17.4 mm) gate opening—3,600 lb. (16kN) gate strength.
L2000025—ALUMINUM CARABINER3/4” (19 mm) gate opening—3,600 lb.(16kN) gate strength.
ONLY 1.6POUNDS!
PATENTS APPLIED FOR
Scan this QR code with your smart phone to learn more about NANO-LOK™!
Model Shown 3101211
MODEL # 3101241
MODEL # 3101240
COMPACT.VERSATILE.SAFE.REPLACE YOUR LANYARD TOREDUCE FALL DISTANCE ANDIMPROVE SAFETY.
Capital Safety - USA: 800 328 6146Canada: 800 387 7484 Latin America: +1 651 385 4301 Asia: +65 65587758 Germany: +49 (0)30 92 03 83 87 00New Zealand: 0800 212 505 Australia: 1800 245 002Europe, Middle East, Africa: +33 (0)4 97 10 00 10Northern Europe: +44 (0)1527 548000www.capitalsafety.com info@capitalsafety.com
©2011, Capital Safety Form: 9700545 rev: D T H E U LT I M A T E I N F A L L P R O T E C T I O N PRODUCT SHEET
NANO-LOK™
SELF RETRACTING LIFELINESNANO-LOK™ LIFELINE HOOK OPTIONS
NANO-LOK™
ANCHOR OPTIONS
ASTANDARD STEELSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
ASTANDARD STEELSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
EVERY NANO-LOK™ HAS AN INTEGRATED ANCHORAGE LOOP TO ATTACHAN ANCHORAGE OPTION FROM BELOW, OR USE YOUR OWN CARABINER.
H3100088—SINGLE LEG CONNECTOR*Triple-action open/close, zinc-plated steel.
* For use only with Nano-Lok™
BFLAT STEELREBAR HOOK2-1/2” (62.5 mm) gate opening—3,600 lb. (16kN) gate strength.
BFLAT STEELREBAR HOOK2-1/2” (62.5 mm) gate opening—3,600 lb. (16kN) gate strength.
I3100087—TWIN LEG CONNECTOR*Self locking/closing gate, 3/4” (19 mm) opening.
EALUMINUM CARABINER (CAPTIVE EYE)3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
DSTEEL SWIVELINGSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
G3100089—CAB MOUNT*Stainless steel bracket with 1.63” (41.4 mm) wide opening by 4.25” (108 mm) tall.
CALUMINUMREBAR HOOK2-1/4” (57 mm) gate opening—3,600 lb. (16kN) gate strength.
CALUMINUMREBAR HOOK2-1/4” (57 mm) gate opening—3,600 lb. (16kN) gate strength.
FALUMINUMSNAP HOOK3/4” (19 mm) gate opening—3,600 lb. (16kN) gate strength.
J3100107—TWIN LEG CONNECTOR—FIXED*Triple locking gate, 3/4” (19 mm) opening, required for ExoFit™ andother “fixed” D-ring harnesses.
K2000112—Saflok™ STEEL CARABINER11/16” (17.4 mm) gate opening—3,600 lb. (16kN) gate strength.
L2000025—ALUMINUM CARABINER3/4” (19 mm) gate opening—3,600 lb.(16kN) gate strength.
ONLY 1.6POUNDS!
PATENTS APPLIED FOR
Scan this QR code with your smart phone to learn more about NANO-LOK™!
Model Shown 3101211
MODEL # 3101241
MODEL # 3101240
COMPACT.VERSATILE.SAFE.REPLACE YOUR LANYARD TOREDUCE FALL DISTANCE ANDIMPROVE SAFETY.