Post on 15-Oct-2015
Specialist for Pumping Technology
A/Aug/04
Ruhrpumpen, Inc.
4501 South 86th East Ave.Tulsa, Oklahoma 74145 USAPhone: 918-627-8400Fax: 918-624-2471e-mail: info@ruhrpumpen.com
Ruhrpumpen GmbH
Stockumer Strasse 2858453 Witten/GermanyP.O. Box 63 09 58432Witten/GermanyPhone: (++49) 23 02/661-03Fax: (++49) 23 02/661-303e-mail: info@ruhrpumpen.de
Ruhrpumpen, S.A.
Nquel No. 9204Ciudad Industrial Mitras,Garca, N.L. Mxico 66000Phone: (+52)(81) 8158-5500Fax: (+52)(81) 8158-5501e-mail: info@corporacioneg.com
www.ruhrpumpen.com
e-mail: info@ruhrpumpen.com
Selection
Guide
1 2
API Line
Horizontal Process Pumps Single StageAPI Line
Horizontal Process Pumps Two Stage
HorizontalProcess PumpsSingle Stage
HorizontalProcess PumpTwo Stage
API Type BB2.Radially split, horizontal two stagecentrifugal pump.Centerline mounted.Diffuser/ volute combined casing.Single suction, radial, closed impeller.Double suction on special request.Thrust compensation by opposed impellers.Top-Top nozzle arrangement.Materials of contruction per API 610. Othermaterials on special request.
C H A R A C T E R I S T I C S
Petroleum Refining, Production andDistribution.Petrochemical.Heavy-duty Chemical.Gas Industry Services.Utilities.
A P P L I C A T I O N S
Refineries.Oil Fields.Petrochemical Plants.Chemical Plants.
A P P L I C A T I O N S
Capacity to (12 ).Head to 400 ( ).Flange size 1 to 12 (discharge).Pressure to ( ).Temperature( ).
2,800 m /hr ,340 U.S. gpmm 1,300 ft
47 kg/cm 667 psig-46C to 450C
-50F to 850F
3
2
O P E R A T I O N L I M I T S
Capacity ().
Head ( ).Discharge flange size 2 to 10.Max. Pressure ( ).Temperature ( ).
18 to 800 m /h 75 to 3,520 U.S.gpm
170 to 600 m 560 to 1,960 ft
98 kg/cm 1,390 psig400C 750F
3
2
O P E R A T I O N L I M I T S
SCERPP-8SVN
R U H R P U M P E N
N O M E N C L A T U R E
RONCGT
R U H R P U M P E N
N O M E N C L A T U R E
Radially split, horizontal single stagecentrifugal pump.Centerline mounted.Single/ double volute depending on size.Single suction, radial, closed impeller.Thrust compensation by balance holes.End-Top nozzle arrangement. Otherarrangements on special request.Materials of contruction per API 610. Othermaterials on special request.
C H A R A C T E R I S T I C S
Heavy duty process design according toAPI 610 latest edition.API Type OH2.Flood oil lubricationother methods oflubrication available.Replaceable front and back wear rings forcasing and impeller.Special design for abrasive liquidsavailable.Low temperature design on special request.Inducers for low NPSHr available.
D E S I G N F E A T U R E S
Heavy duty process design according toAPI 610 latest editionAPI pump type BB2.Other methods of lubrication available.Replaceable wear rings for casing andimpeller.Fan cooling available.
D E S I G N F E A T U R E S
3API Line
Horizontal Double Suction PumpsAPI Line
Horizontal Process Pumps Multistage
4
HorizontalDouble SuctionPump, BetweenBearing SingleStage
HorizontalProcess PumpsMulti Stage
Radially split, horizontal single stagecentrifugal pump.Centerline mounted.Double volute casing.Double suction, radial, closed impeller.Thrust compensation by double suctionimpeller.Top-Top nozzle arrangement. Otherarrangements on special request.Materials of contruction per API 610. Othermaterials on special request.
C H A R A C T E R I S T I C S
Axially split, horizontal multi-stagecentrifugal pump.Near-centerline mounted.Diffuser casing.Single suction, radial, closed impeller.Thrust compensation by opposed impellergroups.Side-Side nozzle arrangement.Materials of contruction per API 610. Othermaterials on special request.
C H A R A C T E R I S T I C S
Heavy-duty high temperature process.Process and Industrial applicationsincluding: Charge, Transfer, Injection andUtility Booster.
A P P L I C A T I O N S
Refineries.Oil Fields.Petrochemical Plants.Chemical Plants.
A P P L I C A T I O N S
Capacity to( ).Head to ( ).Pressure to ( ).Temperature
( ).
4,545 m /hr20,000 U.S. Gpm
518 m 1,700 ft106 kg/cm 1,500 psig185C to
430C -300F to 800F
3
2
O P E R A T I O N L I M I T S
Capacity( ).Head ( ).Discharge flange size 1 1/2 to 6.Max. Pressure ( ).Temperature ( ).
10 to 350 m /h44 to 1,540 U.S. gpm
100 to 1,000 m 325 to 3,280 ft
133 kg/cm 1,880 psig205C 400F
3
2
O P E R A T I O N L I M I T S
HVNJ LineJD
R U H R P U M P E N
N O M E N C L A T U R E
R U H R P U M P E N
N O M E N C L A T U R E
JTN
Heavy duty process design according toAPI 610 latest editionAPI pump type BB2.Ring oil lubrication. Other methods oflubrication available.Replaceable wear rings for casing andimpeller.Fan cooling available.
D E S I G N F E A T U R E S
Heavy duty process design according toAPI 610 latest edition.API pump type BB3.Ring oil lubrication. Other methods oflubrication available.Replaceable wear rings for casing andimpeller.Fan cooling available.
D E S I G N F E A T U R E S
API Line
Multi Stage Axially Split Casing PumpsAPI Line
Volute Casing Centrifugal Pumps
5 6
Multi Stage,Axially SplitCasing Pumps
Volute CasingCentrifugalPumps
Axially split, horizontal multi-stagecentrifugal pump.Near-centerline mounted.Twin volute casing.Single suction, radial, closed impeller.Thrust compensation by opposed impellergroups.Side-Side nozzle arrangement.Materials of contruction per API 610. Othermaterials on special request.
C H A R A C T E R I S T I C S
Oil Fields and Terminals.Crude Oil and Oil Product Pipelines.Water Pipelines.Fluid Injection.High Pressure Services
A P P L I C A T I O N S
Oil-extraction Technology, Onshore andOffshore.Pipeline Technology.Refinery Technology.Chemical/Petrochemical Industry.General Industry.Metallurgical and Steel Industries.Combined Heating and Power Stations.Power Stations.
A P P L I C A T I O N S
Capacity( ).Head ( ).Discharge flange size 6 to 8.Max. Pressure ( ).Temperature up to ( ).
100 to 2,000 m /h44 to 8,800 U.S. gpm
100 to 1,000 m 328 to 3,280 ft
133 kg/cm 1,880 psig205C 400F
3
2
O P E R A T I O N L I M I T S
Capacity( ).Head ( ).Discharge flange size 6 to 32.Max. Pressure ( ).Temperature ( ).
100 to 14,000 m /h4,406 to 61,710 U.S. gpm
20 to 1,200 m 65 to 3,930 ft
183 kg/cm 2,610 psig220C 428F
3
2
O P E R A T I O N L I M I T S
R U H R P U M P E N
N O M E N C L A T U R E
SM
Heavy duty process design according toAPI 610 latest editionAPI pump type BB3.Ring oil lubrication. Other methods oflubrication available.Replaceable wear rings for casing andimpeller.Sleeve/ Tiltingpad bearing design available.Fan cooling available.
D E S I G N F E A T U R E S
Axially split, horizontal single or doublestage centrifugal pump.Near-centerline mounted.Double volute casing.Double suction, radial, closed impeller.Thrust compensation by double suctionimpeller.Side-Side inline nozzle arrangement.Materials of contruction per API 610. Othermaterials on special request.
C H A R A C T E R I S T I C S
Heavy duty process design according toAPI 610 latest edition.API pump type BB1.Ring oil lubrication. Other methods oflubrication available.Near centerline mounting available.Diffuser design available.Replaceable wear rings for casing andimpeller.Fan cooling available.
D E S I G N F E A T U R E S
ZMZMSZLMZM Ix2
R U H R P U M P E N
N O M E N C L A T U R E
API Line
Multistage Single Suction PumpsAPI Line
Vertical Inline Process Pumps
SPN
SPI
7 8
Vertical Inline,Process Pump
Multi Stage,Single SuctionBarrel Pumps
Radially split, vertical inline centrifugalpump.Foot mounted.Single volute casing.Single suction, radial, closed impeller.Thrust compensation by balance holes.Side-Side inline nozzle arrangement.Materials of contruction per API 610. Othermaterials on special request.
C H A R A C T E R I S T I C S
Hydrocarbons.Chemical Solutions.Water.Sea Water.
A P P L I C A T I O N S
Capacity up to( ).Head up to ( ).Discharge flange size 1 1/2 to 8.Max. Pressure:
Basic up to ( ).Special up to 336 ( ).
Temperature ( ).
4000 m /h1,700 U.S. gpm
1,600 m 5,250 ft
178 kg/cm 2540 psikg/cm 4785 psi
450C 840F
3
2
2
O P E R A T I O N L I M I T S
Capacity 2.5 to 835 m /h (11 to 3,690 U.S.gpm.)Head 15 to 290 m (52 to 950 ft).Speed up to 3600 RPM.Temperature to 260C (500F).MAWP to 42 kg/cm (600 psi).
3
2
O P E R A T I O N L I M I T S
ANADCADSL
R U H R P U M P E N
N O M E N C L A T U R E
SPISPN
R U H R P U M P E N
N O M E N C L A T U R E
Radially split, horizontal multi-stagecentrifugal pump.Centerline mounted.Diffuser casing.Single suction, radial, closed impeller.Thrust compensation by balance drum.Top-Top nozzle arrangement.Materials of contruction per API 610. Othermaterials on special request.
C H A R A C T E R I S T I C S
Heavy duty process design according toAPI 610 latest edition.API pump type BB5.Ring oil lubrication. Other methods oflubrication available.Sleeve/tiltingpad bearings available.Replaceable wear rings for casing andimpeller.Different nozzle arrangements available.Fan cooling available.Special design for decoking serviceavailable.Low NPSH double suction design available(only 4 pole speed).
D E S I G N F E A T U R E S
Petroleum Refining, Production andDistribution.Petrochemical.Chemical.
A P P L I C A T I O N S
Heavy duty process design according toAPI 610 latest edition.API pump type OH3/ OH5.OH5 (SPN) close coupled design to SHELLDEP and British Standard 4082.OH3 (SPI) separate bearing bracket.Replaceable wear rings for casing andimpeller.
D E S I G N F E A T U R E S
API Line
Vertical Barrel PumpsSelection Guide
Vertical Turbine Pumps
9 10
VerticalBarrel Pump
VerticalTurbine Pumps
Multi-stage vertical centrifugal pumps withdiffuser type bowl.Francis vane enclosed or semiopenimpellers.Counter Clockwise rotation viewed fromcoupling end (as an option).Basket or Conical strainer according topump requirements.Standard Construction Materials accordingto API last edition.
C H A R A C T E R I S T I C S
Cooling Water.Condensate.Hydrocarbons.Chemical Solutions.Sea Water.
A P P L I C A T I O N S
Capacity to 9,500 m /hr (45,000 U.S.gpm).1,060 m 3,500 ft
Pressure to 105 kg/cm (1,500 psi).565C 1,050F
-196C -320F3,000 kW 4,000HP
3
2
Head to ( ).
Max. Temperature ( ).VMT Min. Temperature ( ).Horsepower ( ).
O P E R A T I O N L I M I T S
Capacity to( ).Head to ( ).Pressure to ( ).Temperature ( ).
46,590 m /hr205,000U.S.gpm
762 m 2,500 ft76 kg/cm 1,080 psi135C 275F
3
2
O P E R A T I O N L I M I T S
VLT (LQ and MQ)VLT (Diffuser)VMT(KX,DX, RX)VZT
R U H R P U M P E N
N O M E N C L A T U R EVTPHQWXHXKXRX
R U H R P U M P E N
N O M E N C L A T U R E
Condensate.Power Plants.Municipal.Hydrocarbons.Pipeline.Refineries.
A P P L I C A T I O N S
.Fabrications manufactured using ASME.Section IX code qualified welders for APIapplications.Fabrications designed to national standardswhen required.Wide range of hydraulic designs to suit allapplications.Choice of bearings and mechanical seals.Pump mounted thrust bearing when required.Tank or sump mount options available.
D E S I G N F E A T U R E S
Low NPSH Shockless Entry first stageimpeller.Integral fabricated column support bearings.Collet or ring and key impeller mounting.One-piece shaft construction for shaftlengths to 20 ft (6m).Rigid 4-piece coupling.Single or Double Suction.Single Stage or Multistage available.Nozzles are available with the Suction in theHead or Barrel.Standard Construction Materials according toAPI latest edition.
C H A R A C T E R I S T I C S
Product or oil lubricated.Large bowl shaft sizing provides longer life.
D E S I G N F E A T U R E S
API Line
Cryogenic PumpsSelection Guide
Hydraulic Decoking Systems
11 12
CryogenicPumps
HydraulicDecokingSystems
Vertical arrangement.API 610 latest edition.Special sealing system.Low temperature design.Construction Materials for CryogenicApplications.VLT single or multistage.SVNV single stage.
Cryogenic applications.Liquid nitrogen and other liquid gases.
VLT CryogenicSVNVVLTV (Diffuser)
C H A R A C T E R I S T I C S
Horizontal arrangement.Multistage, single suction.Barrel type.Radially split case.Bearing brackets on both sides.System, calculated, designed andmanufactured for the demands of theCustomer.API 610.
C H A R A C T E R I S T I C S
A P P L I C A T I O N S
Capacity( ).Head ( ).Max. Pressure ( ).Temperature ( ).
2.27 to 3,000 m /h10 to 13,200 U.S. gpm
6 to 1,152 m 26 to 370 ft148 kg/cm 2,100 psig
196C -320F
3
2
O P E R A T I O N L I M I T S
Capacity up to 350 m /h (1,540 U.S. gpm).Head up to 3200 m (10,500 ft).Speed 3600 RPM or higher.Temperature up to -150C.
3
O P E R A T I O N L I M I T S
R U H R P U M P E N
N O M E N C L A T U R E
A P P L I C A T I O N S
High pressure cutting water.
R U H R P U M P E N
N O M E N C L A T U R E
Hydraulic Decoking System.
Industrial Pumps
A N S IIndustrial Pumps
Horizontal Split Case Pumps
13 14
ANSI Horizontal SplitCase PumpsSingle Stage
Single stage horizontal centrifugal pump.Vertically split casing with flangedconnections horizontal end suction andvertical discharge on the center lineenclosed impeller, clock-wise rotation(viewed from coupling end).Foot mounted.Oil lubricated.
C H A R A C T E R I S T I C S
Single horizontal centrifugal pump.Horizontally split casing, double volute(HSC pumps and some HSRs) minimizesthrust loads and allow operation over a widerange of capacities.Flanged connections.Enclosed impellers, double suction provideshydraulic balance eliminating axial thrust.Clockwise or counter clockwise rotation.
C H A R A C T E R I S T I C S
Chemical.Industrial.General Service.
A P P L I C A T I O N S
Fire Service.Cooling Towers.Municipal.Oil Process.Petrochemical.Sugar Industry.Paper Industry.Pipeline.Others.
A P P L I C A T I O N S
Capacity to ( ).Head to ( ).Temperature ( ).
1,150m /hr 5,000 U.S. gpm235 m 770 ft
315C 600F
3
O P E R A T I O N L I M I T S
Capacity to ( ).Head to ( ).Pressure to ( ).Temperature ( ).
14,318m /hr 63,000 U.S. gpm340 m 1,115 ft
28 kg/cm 400 psig10C to 150C 50F to 300F
3
2
O P E R A T I O N L I M I T S
CPP-21ANSI
R U H R P U M P E N
N O M E N C L A T U R E
HSCHSDHSRZM
R U H R P U M P E N
N O M E N C L A T U R E
Ductile iron (flat face, 150# flanges).All 316 stainless steel (flat face, 150#flanges).Ductile iron with 316 stainless steel internals(flat face, 150# flanges).
S T A N D A R D
C O N S T R U C T I O N M A T E R I A L S
Cast Iron.Cast Iron, Stainless Steel Fitted.All Bronze.All WCB grade Carbon Steel.All Stainless Steel.
S T A N D A R D
C O N S T R U C T I O N M A T E R I A L S
ANSI std. B-73-1.Back pull-out design allows pumpdisassembly without disturbing pipeconnections.Stuffing box choices allows for packing,std. seals or new larger seals.
D E S I G N F E A T U R E S
Oil lubricated bearings for HSC & HSR.Stuffing box allows for mechanical seal.
D E S I G N F E A T U R E S
Industrial Pumps
Horizontal Split Case Pumps Multi StageIndustrial Pumps
Fire Pump
CAPACITY
RATED NET
PRESSURE
PSIG
SUCT/
DISCH.MODEL
250 HD040317
500 HR040611B*
HD060417
HD080620
HD080617
HD080620
HD080617
HD080620
HD080617
HD081218A
HD100820
HD080620
HD081218A
HD100817
HD100820
2500
95-146
123-180
93-142
107-197
78-137
106-197
75-134
103-195
71-130
99-153
110-187
100-192
96-150
86-129
80-182
95-145 HD081218A
750
1000
2000
1250
1500
3 /3
5/5
10/10
6/6
8/6
10/10
8/8
8/8
15 16
Horizontal SplitCase PumpsMulti Stage
Fire PumpHorizontal Split CasePumps Listed forFire Protection Service
Notes:
1. The minimum pipe size for the suction and discharge piping as referenced in thestandard for installation of centrifugal fire pumps, NFPA-20-1999 are specified in this table.2. Pumps having flange sizes other than the pipe size specified in this table may be fittedwith an increaser fitting for connection to the minimum pipe size.3. The operating speed for all pumps would be 1750 RPM, except those shown with anasterisk *, these would be 3600 RPM.
Two and four stage horizontal centrifugalpumps, double volute.Horizontally split casing, lateral suctionand discharge.Enclosed impeller.Counter clockwise rotation viewed fromcoupling end.
C H A R A C T E R I S T I C S
Single stage horizontal centrifugal pump.Horizontally split case.Flanged connections.Enclosed impellers, double suction provideshydraulic balance reducing axial thrust.Clockwise or counter clockwise rotationviewed from coupling side are available.Grease lubricated bearings.
C H A R A C T E R I S T I C S
Ruhrpumpens Fire Pumps are listed byUnderwriters Laboratories Inc., andapproved by Factory Mutual.
A P P R O V A L S
High pressure applications (boiler feed,petrochemical, chemical, industrial).
A P P L I C A T I O N S
Capacity to ( ).Head to ( ).Pressure: ( ).Temperature max: ( ).
454 m /hr 2,000 U.S. gpm670 m 2,200 ft
52 kg/cm 750 psig121C 250F
3
2
O P E R A T I O N L I M I T S
Capacity to ( ).Head to ( ).Pressure toTemperature ( ).
568m /hr 2,500 U.S. gpm139 m 455 ft
14 kg/cm (197 psig).10C to 104C 50F to 220F
3
2
O P E R A T I O N L I M I T S
1. Rated capacities according to UL448 Table4.2.2. Minimum discharge pressure 40 psi.3. Suction lift must not be less than -15ft. at150% rated capacity.
S E L E C T I O N C R I T E R I A
HSM
R U H R P U M P E N
N O M E N C L A T U R E
Oil lubrication.Flanged connections.Stuffing box allows for packing ormechanical seal.
D E S I G N F E A T U R E S
All cast iron.Cast iron, bronze fitted.Carbon steel, iron fitted.Cast iron, 316 SS fitted.
S T A N D A R D
C O N S T R U C T I O N M A T E R I A L S
17
Industrial Pumps
Vertical Turbine PumpsIndustrial Pumps
Vertical Axial Flow Pumps
18
VerticalTurbine Pumps
Vertical AxialFlow Pumps
Multi-stage vertical centrifugal pumps withdiffuser type bowl.Francis vane enclosed impellers.Counter clockwise rotation viewed fromcoupling end (as an option).Basket or Conical strainer according topump requirements.
C H A R A C T E R I S T I C S
Multi-stage vertical centrifugal pump,diffuser type bowl.Axial flow impeller, high efficiency.May handle solids up to 14 diameter (365mm).Counter clockwise rotation viewed fromshaft coupling.
C H A R A C T E R I S T I C S
Deep Well & Irrigation.Sumps, Condensate (Can Pump).Fire Service.Municipal.Industrial.
A P P L I C A T I O N S All applications that require large quantitiesof water with low head, like drainage, wastewater, flood control, irrigation, wastetreatment plants, underpass drainage,condenser cooling, constructiondewatering, ditch pumps and raw waterintakes.
A P P L I C A T I O N S
Capacity to ( ).Head to ( ).Pressure to ( ).Temperature ( ).
13,636 m /hr 60,000 U.S.gpm762 m 2,500 ft
76 kg/cm 1,080 psi121C 250F
3
2
O P E R A T I O N L I M I T S
Capacity to( ).Head ( ).Pressure ( ).Temperature ( ).
30,000 m /h132,000 U.S. gpm
20 m 66 ft2 kg/cm 28 psi
80C 176F
3
2
O P E R A T I O N L I M I T S
VTPHQ
R U H R P U M P E N
N O M E N C L A T U R EVAFPOVPV
R U H R P U M P E N
N O M E N C L A T U R E
Basket type strainer.Extended Suction bell to minimize vortices.
O P T I O N A L
A C C E S O R I E S
Product or oil lubricated.Large bowl shaft sizing provides longer life.Enameled bowls 5 thru 15.
D E S I G N F E A T U R E S
Bowls:
Column:
Discharge Head:
Cast Iron Bowls.Bronze Impellers.416SST Shafting.
Carbon steel pipes and AISI-1045 carbonsteel shaft.
Cast iron with 125-AISI flat face flangedconnections.Fabricated steel with 150# and 300# AISIflanges as an option.
S T A N D A R D
C O N S T R U C T I O N M A T E R I A L S
Above or below base discharge.Discharge elbows designed to reducefriction losses, diffusers designed tominimize turbulence and increase efficiency.Product, oil or fresh water lubrication.
D E S I G N F E A T U R E S
Bowls:
Column:
Discharge head:
Cast iron with bronze impeller.Carbon steel with AISI-1045 shaft.
Fabricated steel.
S T A N D A R D
C O N S T R U C T I O N M A T E R I A L S
19
Industrial Pumps
Vertical Circulator and Mixed Flow PumpsIndustrial Pumps
Sump Pumps
20
Vertical Circulator andMixed Flow Pumps
Sump Pumps
Vertical space saving construction.Open, semi-open and closed impellersavailable for wide range of applications andaccording to pump model.Oil, fresh water or self lube columnconstruction.Engineered to customer specifications.Wide range of impeller designs and specificspeeds (1,800-14,000) for optimumhydraulic coverage. Integral bearingretainer.Threaded or flanged column depending onits size, with water or oil lubrication.Sizes 8 in (200 mm) to 120 in (3,000 mm).
C H A R A C T E R I S T I C S
Power Generation.Condenser Cooling Water Service.Cooling Tower Service.Flood Service.Storm Water Disposal.Water Treatment.Primary Water Supply.Waste Treatment Plants.Industrial Service.Sump Drainage.
A P P L I C A T I O N S
Capacity to( ).Head to ( ).Pressure ( ).Temperature( ).
50,000 m /hr220,000 U.S. gpm
175 m 575 ft11 kg/cm 150 psi
-30C to 135C-20F to 275F
3
2
O P E R A T I O N L I M I T S
Capacity ().
Head ( ).Max. Pressure ( ).Temperature ( ).
3 to 650 m /h 10 to 2,800 U.S.gpm
3 to 120 m 10 to 400 ft12 kg/cm 175 psig
200C 400F
3
2
O P E R A T I O N L I M I T S
HXKXRXWXVMFTR
R U H R P U M P E N
N O M E N C L A T U R E
Vertical arrangement.Sump.Single Suction.Single Stage.
C H A R A C T E R I S T I C S
Water.Hydrocarbons.Process Water.River Water.Chemical Solutions.
A P P L I C A T I O N S
R U H R P U M P E N
N O M E N C L A T U R E
Sump Pump
Above or below ground discharge.Packed stuffing box or mechanical seal.Optional pull-out design for ease inmaintenance except VMF and TR.Pump mounted thrust bearings whenrequired.
D E S I G N F E A T U R E S
Industrial Pumps
Single Stage, Single Entry DesignSelection Guide
Floating Dock Pumps
21 22
CentrifugalPumps, SingleStage, SingleSuction Desing
Floating Dock Pumps,Single StageDouble Suction Design
Capacity up to( ).Head up to ( ).Discharge flange size 6 to 16.Pressure up to 21 (304 ).Temperature up to ( ).
2,800 m /h12,340 U.S. gpm
160 m 525 ft
kg/cm psi210C 410F
3
2
Capacity( ).Head 3 (10 ).Discharge flange size 12 to 28.Pressure up to 5 (72 ).Temperature up to ( ).
170 to 6000 m /h750 to 26,500 U.S. gpm
to 20 m to 66 ft
kg/cm psi40C 104F
3
2
O P E R A T I O N L I M I T S
O P E R A T I O N L I M I T S
SOSOM
R U H R P U M P E N
N O M E N C L A T U R E
Cooling Water.Drinking Water.Sea Water.Fire Pump.SOM as Hot Water Pump.
A P P L I C A T I O N SA P P L I C A T I O N S
Main bilge pump on floating docks.
R U H R P U M P E N
N O M E N C L A T U R E
ZVZ
Radially split, horizontal, centrifugal pump.Foot mounted.Single volute casing.Single suction, radial, closed impeller.Thrust compensation by balance holes.End-Top nozzle arrangement.
C H A R A C T E R I S T I C S
Radially split, vertical mounted centrifugalpump.Vertical foot mounted.Single volute casing.Double suction, radial, closed impeller.Thrust compensation by double suctionimpeller.Side-Side nzzle arrangement.
C H A R A C T E R I S T I C S
Waste Water Pumps
Horizontal Pumps with Single Channel ImpellerWaste Water Pumps
Two Channel Impeller Centrifugal Pumps
23 24
HorizontalCentrifugal Pumps,with SingleChannel Impeller
Two ChannelImpellerCentrifugalPumps
Capacity( ).Head ( ).Discharge flange size 5 to 12.Pressure up to 4 (58 ).Temperature up to ( ).
70 to 2,000 m /h308 to 8,820 U.S. gpm
4 to 35 m 13 to 115 ft
kg/cm psi80C 176F
3
2
Capacity 40( ).Head 3.5 to 32m ( ).Pressure up to ( ).Temperature up to ( ).
0 to 800 m /h1760 to 3,525 U.S. gpm
11 to 115 ft4 kg/cm 65 psi
80C 176F
3
2
O P E R A T I O N L I M I T S
O P E R A T I O N L I M I T S
R U H R P U M P E N
N O M E N C L A T U R E
Nonclogging/Non-stringing single channelimpeller.Back pull out design.Casing with a cleaning opening andreplaceable wear plate.Impeller with a large waterway and vanneson the front and back shroud.Shaft sealing with a special waste waterseal or a mechanical seal.
C H A R A C T E R I S T I C S
Horizontal or Vertical.Single Suction.Single Stage.Two channel pot impeller.Bearing bracket.Radially split.Discharge nozzle tangentially.
C H A R A C T E R I S T I C S
Municipal and industrial raw waste water.Combined sewage and rain water.Waste water pumping stations.
A P P L I C A T I O N SSewage.Fecal Matter.Rain Water.Sludge.
A P P L I C A T I O N S
R U H R P U M P E N
N O M E N C L A T U R E
ESK
STSTV
Waste Water Pumps
Horizontal or Vertical with Three Pot Channel ImpellerWaste Water Pumps
Submersible Pumps
25 26
Horizontal Pumpswith ThreeChannel Impeller
SubmersiblePumps
Capacity 30(1,320 ).Head ( ).Pressure up to ( ).Temperature up to ( ).
0 to 18,000 m /hto 79,344 U.S. gpm
2 to 50 m 6 to 165 ft7 kg/cm 100 psi
40C 104F
3
2
O P E R A T I O N L I M I T S
SKO
R U H R P U M P E N
N O M E N C L A T U R ESTT (Volute Casing).PVT (Propeller Pump).TRT (Mixed Flow, only for clean water).LKT (Mixed Flow).
R U H R P U M P E N
N O M E N C L A T U R E
Horizontal or Vertical.Single Suction.Single Stage.Radially Split Casing.Three Channel pot impeller.Bearing bracket.
C H A R A C T E R I S T I C S
Vertical.Single Suction.Single Stage.Submersible Motor.
C H A R A C T E R I S T I C S
Waste Water.Combined Sewage.Rain Water.Fecal Matter.Sludge.
A P P L I C A T I O N S
Water.Rain Water.Combined Sewage.Sea Water.Cooling Water.Sludge.
A P P L I C A T I O N S
Capacity 250 to 3,000( ).Head (6 ).Temperature up to ( ).Pressure up to 2 kg/cm (29 psig).
m /h1,100 to 13,220 U.S. gpm
2 to 20 m to 131 ft60C 140F
3
2
O P E R A T I O N L I M I T S
Waste Water Pumps
Solid Handling PumpsWaste Water Pumps
Single Stage Single Entry Mixed Flow Pumps
27 28
Solid HandlingPump
Single Stage,Single SuctionMixed Flow Pumps
Capacity up to( ).Head up to ( ).Pressure up to 4.5 (64 ).Temperature up to ( ).Flange Size 10 to 36.
14,000 m /h61,700 U.S. gpm
45 m 147 ftkg/cm psi40C 104F
3
2
Capacity( ).Head ( ).Temperature up to ( ).Pressure up to ( ).
18 to 1,590 m /h80 to 7,000 U.S. gpm
1.8 to 42 m 6 to 140 ft120C 248F
4.5 kg/cm 60 psi
3
2
O P E R A T I O N L I M I T S
O P E R A T I O N L I M I T S
SHPSump Pump
R U H R P U M P E N
N O M E N C L A T U R E
Horizontal or Vertical.Single Stage.Enclosed impeller.
C H A R A C T E R I S T I C S
Single Stage.Single Suction.Semi-axial closed impeller.Antifriction bearings.Mixed flow pump.
C H A R A C T E R I S T I C S
Water.Waste Water.River Water.Rain Water.
A P P L I C A T I O N S
SD:
SK & SKV:
Cooling Water.General Water.Drinking Water.Rain Water.Sea Water.
Sewage.Waste Water.
A P P L I C A T I O N S
SDOSDVSKSKV
R U H R P U M P E N
N O M E N C L A T U R E
Ruhrpumpen
Domestic PumpsRuhrpumpen
Domestic Pumps
29 30
Domestic Pumps
Centrifugal Pump.Monoblock design.Suction diameter 1 to 1-1/2Discharge diameter 1 to 1-1/2.Closed Impeller.Temperature up to 70C.
Domestic use.Water supply.Tanks and drinking trough.Pool water circulation.Small pressure equipments.
Domestic Line
C H A R A C T E R I S T I C S A P P L I C A T I O N S
Centrifugal Pump.Monoblock design.Suction diameter 1-1/2.Discharge diameter 1 to 1-1/4.Closed Impeller.Temperature up to 70C.
Pressure equipment.Car wash centers.Domestic use.Fire systems.
Jet Line
C H A R A C T E R I S T I C S A P P L I C A T I O N S
Centrifugal Pump.Monoblock design.Suction diameter 1-1/2 to 4.Discharge diameter 1 to 4.Semi-open/Closed Impeller.Mechanical seal.Temperature up to 70C.
Pumping for long distancesand highs.Industrial.Watering by aspersion.Watering systems.Chemical and Petrochemical.Fire Systems.
Medium-Pressure Line
C H A R A C T E R I S T I C S A P P L I C A T I O N S
Centrifugal Pump.Monoblock design.Suction diameter 1-1/2 to 6.Discharge diameter 1-1/2 to 6.Closed Impeller.Mechanical Seal.Temperature up to 70C.
Water supply to elevated tanks.Watering by aspersion.Pressure Equipment.Construction Industry.
Hi-Pressure Line
C H A R A C T E R I S T I C S A P P L I C A T I O N S
Centrifugal Pump.Monoblock design.Suction diameter 1-1/2 to 10.Discharge diameter 1-1/2 to 10.Semi-open Impeller.Temperature up to 70C.
Construction industry.Water and waste water.Agriculture and cattle raising.Watering by aspersion or flood.
Self-Priming Line
C H A R A C T E R I S T I C S A P P L I C A T I O N S
Submersible Centrifugal Pump.Suction diameter 1-3/4 to 3-1/2.Discharge diameterOpen Impeller.Temperature up to 70C.
1-1/4 to 4.
Drain basements, tanks,garages.Ornamental fountains.Waste Water.Portable use optional.
Waste Water Line
C H A R A C T E R I S T I C S A P P L I C A T I O N S
Submersible Centrifugal Pump.Exclusive for clean water.Suction diameter 4 and 6.Discharge diameter
Impeller.Check on discharge.Temperature up to 70C.
1-1/4 to 3.Closed
Valve
Clean water.Agriculture.Deep well.Municipal drain.
Deep Well Line
C H A R A C T E R I S T I C S A P P L I C A T I O N S