Post on 22-May-2018
Rev 09.15
Your Trusted Partner in Material Supply for Construction, Façade, RHVAC & Solar Industry.
Seal The World GREEN
Sealant Range
Thermal / Acoustic Insulation
Foam Materials
Adhesive Tapes
Glass / Metal Protection Film & Coating
Setting Block for Glass
Ta
ble
of
Co
nte
nts
2
Table of Contents
1 Company Profile ..................................................................................................................................................................4
2 Product Summary ................................................................................................................................................................6
3 Sealant Feature & Application Chart ..................................................................................................................................9
4 Two- Part Structural Glazing Silicone Sealants .................................................................................................................10
GE UltraGlaze® SSG4600 [Accelerated Cure / Enhanced Performance]
GE UltraGlaze® SSG4400
5 One- Part Structural Glazing Silicone Sealants .................................................................................................................11
GE UltraGlaze® SSG4000E / SSG4000 AC
GE Construction SCS1200® [FDA- Certified / High Temperature: Up to 204oC]
GE SilPruf® SCS2000 [Dual-Purpose]
6 Weatherproofing Silicone Sealants ............................................................................................................................. 12
GE SilPruf® NB SCS9000 [Non- Stain, Non- Bleed / Reduced Dirt Pick- Up]
GE SilPruf® SCS2000N
GE UltraPruf® II SCS2900
GE SilGlaze® N-10 [High Temperature: Up to 206oC]
GE AP 3600
7 Modified Silicone Sealants [Non-Bleed, Non-Stain] .................................................................................................... 14
SHARPIE Modified Silicone Sealant MSC1-01 [Cleanroom ≥ Class 100 (ISO 5)] SHARPIE Modified Silicone Sealant MSC1-14
SHARPIE Modified Silicone Sealant MSC1-03
SHARPIE MEGAHARD ONE MS Sealant MSC1-06 [MEGA Hard One]
8 Specialty Sealants ........................................................................................................................................................ 15
GE PENSIL® 300 Firestop Joint Silicone Sealant [Fire-rated up to 2-hr / Enhanced Chemical Resistance]
VAROSEAL Polyurethane (PU) Sealant [Cleanroom ≥ Class 1000 (ISO 6)]
GE TOSSEAL® 811 & 817 Expansion Joint Sealant
GE TOSSEAL® 78 Super Transparent Silicone Sealant
GE TOSSEAL® 83 Mildew Resistance Silicone Sealant
GE TOSSEAL® 83AB Mildew Resistance Silicone Sealant [Anti-Bacterial]
GE SEAL IT RIGHT 168S Silicone
GE TOSSEAL® 80-SC Cleanroom Sealant [Cleanroom ≥ Class 1 (ISO 3)] GE Multisil™ SCS5500 Silicone [For Plastics & Polycarbonates]
X’traseal X’mastic Non- Skinning Sealant [Non- Drying]
EGOSTIK EG-130 No More Nails
9 General Purpose Sealants ............................................................................................................................................ 18
GE SEAL IT RIGHT 168 Silicone
GE ALL PURPOSE 268 Silicone [Mildew Resistance, Tested by PSB, Singapore]
LIBERTY 405 Acrylic Gap Sealant [Paintable. BS476: Part 7]
EGOSTIK EG-120 No More Gap Acrylic Sealant [Paintable]
10 Construction Sealant Primers / Cleaning Agent .......................................................................................................... 19
GE SS4044P, SS4004P, Tosprime C [Primers]
Isopropyl Alcohol (IPA) / Xylene [Cleaning Agent]
11 Thermal / Acoustic Insulation ...................................................................................................................................... 20 KM Mineral Wool
KM Glass Wool
MAXFLEX™ EPDM Closed Cell Elastomeric Insulation [ST / HF / HT / AL Clad / FSK]
KM Fiberglass Gasket Tape [STANDARD / SERIES AGB]
Ta
ble
of
Co
nte
nts
3
Table of Contents
12 Foam / Adhesive Tape .......................................................................................................................................................24 MaxDuct Tape [Duct Gasket Foam Tape]
MaxTape [Insulation Foam Tape]
KM Aluminum Foil Tape
VitalBand Bitumen Tape
13 Protection Film / Tape for Glass & Metal .........................................................................................................................25 PE Protection Film for Glass
PE Protection Film for Metal
PVC Protection Tape for Metal
PVC Static Protection Tape
14 Protection Coating for Façade, Building & Interior Work ................................................................................................27
WindowGOOP™ Temporary Peel- Able Protective Coating for Glass
MultiGOOP Temporary Peel- Able Protective Coating for Glass and Metal
GE SilShield SEC2400 Silicone Architectural Coating
GE SilShield SEC2500 AWB Air and Water Barrier Silicone Coating
15 Backing Foam Range for Sealant / Setting Block / Waterproofing Membrane for Façade ....................................... 29
KM Breathable Tape [Open Cell]
KM HD- EVA Foam [Closed Cell]
KM PE Backer Foam [Closed Cell – Square / Round]
KM Rubber Setting Block Range for Glass
KM Silicone Seal / Sheet
16 Structural Adhesive Foam Tape ................................................................................................................................... 31
17 STI Firestop Product Range Overview ......................................................................................................................... 32 18 Veda France Building Joints Product Range Overview ................................................................................................ 33
19 Recent Iconic Projects Involvement ............................................................................................................................ 34
C
HA
PE
TE
R 2
: P
rod
uct
Su
mm
ary
4
COMPANY BACKGROUND
2960 is a young growing international trading company with the core
purpose to improve building work efficiency and standard through expert
solutions in specialty materials, components and systems.
OUR MISSION
“Our MISSION is to profitably enable our customers’ success by constantly challenging limits through Superior Quality & Excellent Service.”
OUR CORE VALUES
� Service: ¾ In- House Test Laboratory ¾ Site De- Glazing Test ¾ Momentive ADC Laboratory
@ Science Park ¾ On- Site Inspection
¾ Technical Advisory ¾ Optimum Storage Environment ¾ Drawing Review ¾ Operational Production
� Quality: ¾ Test Report from Recognized
Test Agency ¾ Certificate of Analysis from
Manufacturer ¾ Optimum Storage Environment ¾ On- Site Inspection
� Innovation: ¾ Business Development ¾ Problem Solving ¾ Application Development
� Integrity: ¾ Ownership of Collaboration ¾ Quality Assurance ¾ Service Orientated
� Teamwork: ¾ Business Partnership ¾ Project Ownership
CH
AP
TE
R 2
: P
rod
uct
Su
mm
ary
5
Two Nine Six O Trading Pte Ltd is the Authorized Distributor for:
1) Momentive – GE Silicone Sealant Range 2) SHARPIE Modified Silicone Sealant Range 3) VAROSEAL Polyurethane Sealant by HEPCE CHEM 4) EGOSTIK Acrylic and Adhesive Sealant Range 5) MaxFlex EPDM Elastomeric Closed Cell Thermal / Acoustic Insulation 6) WindowGOOP™ Temporary Protective Peel-able Coating 7) Specified Technologies Inc. [STI] Firestopping 8) VEDAFRANCE Expansion Joint Systems 9) VedaFeu Firestop Expansion Joint Systems
Manufacturer for:
1) KM Acrylic Foam Tape 2) KM Heavy Duty – Ethylene Vinyl Acetate (HD-EVA) Closed Cell Foam Tape 3) KM Breathable (Open Cell) Foam Tape 4) KM Mineral Wool & Glass Fiber Thermal / Acoustic Insulation
5) KM Polyethylene PE Closed Cell Backer Foam / Rod 6) Our materials are currently supplied to various industries as outlined below:
Construction Industry Furniture Industry RHVAC Industry
Construction Sealants
Building Insulation/Foam
Adhesive & Protection Tapes
Protective Coating
Firestopping Solutions
Insulation
Adhesive & Protection Tapes Adhesive & Protection Tapes
Sealants
Firestopping Solutions
Sealants
Protective Coating
C
HA
PE
TE
R 2
: P
rod
uct
Su
mm
ary
6
Other Sealant Grades and Adhesive: � SHARPIE Modified Silicone Sealant
Range
� VAROSEAL Polyurethane (PU) Sealant
� EGOSTIK No More Gap Acrylic Sealant
� EGOSTIK No More Nail Adhesive Sealant
� EGOSTIK Non Drying Mastic Sealant
Two Nine Six O Trading Pte Ltd
Your Trusted Material Supplier for Façade, Building, RHVAC & Solar.
2960 provides you an Efficient & Economical material for your building environments:
Momentive – GE Silicone Sealant Range: � All Purpose Sealant for Ducting, Cold room,
Sanitary and general installations.
� Structural Sealants for Glazing and Curtain wall
� Weatherproofing Sealants
� Specialty Sealants for:
o Clean room
o FDA Certified
o Fire Stop / Smoke Stop
o High Temperature
o Expansion Joint
� Construction Sealant Primers
Backer Foam range for Sealant & Other Applications: � Closed Cell Foam:
o KM Polyethylene (PE) Backer Foam
(Round / Square)
o KM HD-EVA Foam Tape
� Opened Cell Foam Tape: o KM Breathable Tape
CH
AP
TE
R 2
: P
rod
uct
Su
mm
ary
7
MAXFLEX™ EPDM Closed Cell Elastomeric Insulation: � Class ‘0’ Fire Rated
� In Tubes and Sheets
� Can be laminated with AL or FSK cladding
HANALON Polyethylene (PE) Closed Cell Insulation: � Class ‘1’ Fire Rated
� In Tubes and Sheets
� Laminated in LLDPE or AL
� Coated with PET film for thermal
enhancement
KM Mineral Wool
Environmental- Friendly, Incombustible,
Acoustic & Thermal Insulation � Environmental- Friendly, zero HCHO & TVOC
� Incombustibility & Heat- Resistance, up to
600oC
� Durable & Extreme Weatherability
� Chemical Resistance
� Sound Absorption
� Thermal Insulation
KM Glass Wool
Environmental- Friendly, Incombustible,
Acoustic & Thermal Insulation � Environmental- Friendly, zero HCHO & TVOC
� Incombustibility & Heat- Resistance, up to
400oC
� Durable & Extreme Weatherability
� Water Resistance
� Sound Absorption
� Thermal Insulation
CH
AP
TE
R 2
: P
rod
uct
Su
mm
ary
8
Special Coating: � WindowGOOP™ Temporary Protective
Peel-able Coating
� MultiGOOP Temporary Protective Peel-
able Coating
� GE SilShield SEC2400
� GE SilShield SEC2500
Silicone Architectural Coating
Protection Film Range: � KM PE Protection Film [Green/ Blue] � KM PE Protection Tape Protection Tape Range: � KM PVC Protection Tape [Black/ White] Cleaning Agent: � Isopropyl Alcohol (IPA) � Xylene
KM Rubber Setting Block for Glazing: � 100% Silicone
� EPDM(Si)
� EPDM
� PVC
� SCR
Waterproofing Membrane for Façade � KM Silicone Seal / Sheet
Tape Range: � KM® Aluminum Foil Tape � KM® Fibreglass Tape � MaxFlex™ EPDM Insulation Foam Tape � Max- Duct Gasket Tape � KM PE Insulation Foam Tape � KM PU Open Cell Tape � KM Acrylic Foam Tape
CH
AP
TE
R 3
: S
ea
lan
t F
ea
ture
& A
pp
lica
tio
n C
ha
rt
9
CH
AP
TE
R 4
: T
wo
- P
art
Str
uct
ura
l G
lazi
ng
Sil
ico
ne
Se
ala
nts
10
GE UltraGlaze® Structural Silicone Sealants [Two- Components]
UltraGlaze®SSG4600 [Accelerated Cure]
UltraGlaze®SSG4400
Uses, Applications Property Significance
High-Modulus silicone elastomeric adhesive,
two- part structural glazing sealant (Part A +
B).
� Primerless Adhesion
� Catalyst options – In Black or Grey
� Adjustable work life
� Low pumping viscosity
� High application rate
� Fast Adhesion build
� Compatible with most GE Insulating
Glass, Structural & Weathersealing
silicones
Primerless Adhesion to: (Test applications always
recommended to verify
adhesion under actual use
conditions.)
Primerless adhesion is desirable when
testing or when experience has
demonstrated that reliable long-term
adhesion may be obtained without primer.
In many critical applications, priming is an
added safety factor.
� Glass
� Most glass coatings
� Most paints
� Most metals
� Concrete and masonry
Dynamic Joint Movement ASTM C719
(Continuous extension and
compression, 1/8” per hour)
Movement capability determines suitability
for known building movement conditions.
Sealants should always be matched with
building design criteria.
± 25 %
(Design restricts movement to ± 12.5 %)
± 25 %
(Design restricts movement to ± 12.5 %)
Minimum Joint Dimensions (Width x depth)
Important: It related to the sealant’s ability to accommodate the required design
movement.
6 mm x 6 mm 6 mm x 6 mm
Maximum Joint Dimensions (Width x depth)
Important: It related to the sealant’s ability to accommodate the required design
movement.
25 mm x 9.5 mm 25 mm x 9.5 mm
Tooling Time [27oC @ 50% R.H.]
Indicates time it takes for a skin to form on
the surface of the sealant bead.
20 – 90 minutes
(Depending on mix ratio)
20 – 45 minutes
(Depending on mix ratio)
Tack-Free Time (Fed. Spec. TT-S-001543A)
Length of time a sealant requires before it
can withstand incidental touch. Important
for handling in many applications.
1 to 2 hours 2 hours
Cure Time [To 3/8” depth @ 27oC and
50% R.H.]
Cure time determine how long a sealant
takes to develop its full properties.
Important in glazing and curtain wall
sealant applications, as well as in field and
plant installations..
1 – 3 hours (Green Strength)
2 – 7 days (Full Cure)
2 – 4 hours (Green Strength)
2 – 7 days (Full Cure)
Application Temperature Range
Broad application temperature range
extends practical working time. + 4 to + 49oC + 4 to + 49oC
Hardness (Shore A) (ASTM D2240)
Extreme hardness can limit movement
capability and long-term performance. 40 40
Tensile Strength (ASTM D1135)
Significant in sealants only when combined
with extension (modulus). Highest tensile
strength best in structural glazing
applications.
63 psi (After 2 Hours)
104 psi (After 4 Hours)
192 psi (Full Cure)
140.6 psi
Peel Strength (ASTM D624)
An indication of elastomeric properties and
adhesion. 65 to 70 ppi 39.1 ppi
PSI Stress @ 50% Extension (1/2” x 3/8” x 2” bead)
Stress at a given extension is an indicator
of sealant modulus. 132 psi 85 psi
Ultimate Elongation (ASTM D412) 256 % 200 %
Sag/ Slump Non- sag required for vertical joints 2.5 mm max 2.5 mm max
VOC Volatile organic content 21 g/L 27 g/L
Performance Range Temperature ranges over which sealant is
expected to maintain elasticity. - 48 to 149oC - 48 to 149oC
Cure Method Important for compatibility decisions. Condensation (Neutral) Condensation (Neutral)
Packaging Indicates what type of equipment is
required for dispensing.
55 gals. Drum (Base),
5 gal. Pail (Catalyst)
55 gals. Drum (Base),
5 gal. Pail (Catalyst)
Color Available Black, Grey Black, Grey
Conformance to ASTM and Federal Specifications
These specifications establish a standard of
quality for one-part, chemically- curing
sealants.
ASTM C-920, Type S, NS, Class 25, Use G & A
ASTM C-1184, Type M, Use G & O
GB16776- 2005
ASTM C-920, Type M, NS, Class 12.5, Use G
& A
ASTM C-1184, Type M, Use G & O
GB16776
TT-S-227E (COM-NBS)
Country of Origin USA USA / Japan / China
CH
AP
TE
R 5
: O
ne
- P
art
Str
uct
ura
l G
lazi
ng
Sil
ico
ne
Se
ala
nts
11
GE UltraGlaze® Structural Silicone Sealants
UltraGlaze® SSG4000E
UltraGlaze® SSG4000AC [Accelerated Cure]
GE Construction SCS1200®
GE SilPruf® SCS2000 [Dual-Purpose]
Uses, Applications
High- Strength, neutral- cure, structural glazing and
weathersealing silicone sealant.
Premium acetoxy-cure glazing
sealant for structural as well as
general purpose glazing.
FDA- Certified
For weatherseals, structural
glazing and general purpose
glazing
Primerless Adhesion to: (Test applications always
recommended to verify
adhesion under actual use
conditions.)
� Glass
� Most glass coatings
� Most paints
� Most metals
� Concrete and masonry
� Glass
� Glazed surfaces
� Glass blocks
� Metal
� Many plastics
� Glass
� Stone
� Most paints
� EIFs
� Most metals
� Concrete
&
Masonry
� Most
Plastics
� Glazed
surfaces
Dynamic Joint Movement ASTM C719
(Continuous extension and
compression, 1/8” per hour)
± 25 % ± 25 % ± 25 % ± 50 %
Minimum Joint Dimensions (Width x depth)
6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm
Maximum Joint Dimensions (Width x depth)
25 mm x 9.5 mm 25 mm x 9.5 mm 25 mm x 9.5 mm 25 mm x 9.5 mm
Tooling Time [27oC @ 50% R.H.]
30 minutes 30 minutes 10 minutes 20 to 30 minutes
Tack-Free Time (Fed. Spec. TT-S-001543A)
2.5 to 4 hours 2.5 to 4 hours 30 minutes 3 to 4 hours
Cure Time [To 1/4” depth @ 21oC and
50% R.H.]
5 – 7 days 1 – 2 days 24 hours 3 – 4 days
Application Temperature Range + 4 to + 49oC + 4 to + 49oC + 4 to + 43oC + 4 to + 43oC
Performance Range - 12.8 to 121oC - 12.8 to 121oC - 48 to 204oC -48 to 121oC
Hardness (Shore A) (ASTM D2240)
39 33 20 to 37 24
Tensile Strength (ASTM D412)
160.2 psi 149.1 psi 270 psi 341 psi
Peel Strength (ASTM C794)
39.6 ppi 37.8 ppi 61 ppi 55.5 ppi
PSI Stress @ 50% Extension (1/2” x 3/8” x 2” bead) 102.7 psi 84.5 psi N.A. 47 psi
Ultimate Elongation (ASTM D412) 451 % 433 % 513 % 715 %
Sag/ Slump 2.5 mm max 2.5 mm max 2.5 mm max 2.5 mm max
VOC (WPSTM C1454)
31 g/L 37 g/L 23 g/L 20 g/L
Cure Method Alkoxy (Neutral) Alkoxy (Neutral) Acetoxy Alkoxy (Neutral)
Packaging 591.5 ml Sausage Packs
[12 Sausages / Carton]
591.5 ml Sausage Packs
[12 Sausages / Carton]
300 ml Cartridges
[24 Cartridges / Carton]
591.5 ml Sausage Packs
[12 Sausages / Carton]
Color Available Black Black, Grey
Translucent, White, Black,
Aluminum Grey, Bronze
White, Black, Limestone, Light
Grey, Aluminum Grey, Dark Grey,
Precast White, Bronze
Country of Origin Netherlands USA USA USA
Conformance to ASTM and Federal Specifications
ASTM C-920, Type S, NS,
Class 25
ASTM C-1184
ASTM C-920, Type S, NS,
Class 25
ASTM C-1184
ASTM C-920, Type S, NS, Class 25
ASTM C-1184
FDA (21 CFR 175.105)
FDA (21 CFR 175.300)
FDA (21 CFR 177.2600)
NSF Std: No. F51
UL723-79
ASTM C-920, Type S, NS, Class 50
ASTM C-1184, UL723, ASTM E814
CH
AP
TE
R 6
: W
ea
the
rpro
ofi
ng
Se
ala
nts
12
GE Weatherproofing Silicone Sealants
GE SilPruf® NB SCS9000 [Non Stain, Non Bleed]
GE SilPruf® SCS2000N
GE UltraPruf® II SCS2900
Uses, Applications One-part, non-stain, reduced-bleed
weatherproofing sealant
One-part, Neutral-cure sealant for
weathersealing applications
Neutral-cure for glazing/ concrete/
masonry/ stone. Low-gloss matte finish
Primerless Adhesion to: (Test applications always
recommended to verify adhesion
under actual use conditions.)
� Glass
� Stone
� Most paints
� Most metals
� Glass
� Stone
� Most paints
� EIFs
� Most metals
� Glass
� Polycarbonate
� Vinyl
� EIFs
� Most metals
� Glazed surfaces
� Concrete &
Masonry
� Numerous
Plastics
� Glass
� Stone
� Most paints
� EIFs
� Most metals
� Glazed surfaces
� Concrete &
Masonry
� Most plastics
Dynamic Joint Movement ASTM C719
(Continuous extension and
compression, 1/8” per hour)
± 50 % ± 50 % ± 50 %
Minimum Joint Dimensions (Width x depth)
6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm
Maximum Joint Dimensions (Width x depth)
50 mm x 9.5 mm 50 mm x 9.5 mm 25 mm x 9.5 mm
Tooling Time [27oC @ 50% R.H.]
30 to 40 minutes 20 to 30 minutes 20 to 30 minutes
Tack-Free Time (Fed. Spec. TT-S-001543A)
3 to 4 hours 1.5 to 2 hours 3 hours
Cure Time [To 3/8” depth @ 27oC and 50%
R.H.]
2 – 3 days 3 – 4 days 3 – 5 days
Application Temperature Range + 4 to + 43oC + 4 to + 43oC
Performance Range -48 to 121oC
Up to 177 oC
(under intermittent exposure
-48 to 149oC
Up to 204 oC
(under intermittent exposure
-48 to 149oC
Up to 177 oC
(under intermittent exposure
Hardness (Shore A) (ASTM D2240)
27 24 25
Tensile Strength (ASTM D412)
244 psi 341 psi 230 psi
Peel Strength (ASTM C794)
30.8 ppi 56.6 ppi 46 ppi
PSI Stress @ 50% Extension (1/2” x 3/8” x 2” bead) - 47.0 psi -
Ultimate Elongation (ASTM D412) 629 % 715 % 745 %
Sag/ Slump 2.5 mm max 2.5 mm max 2.5 mm max
VOC 37 g/L 20 g/L 30 g/L
Cure Method Alkoxy (Neutral) Alkoxy (Neutral)
Packaging 591.5 ml Sausage Packs
[12 Sausages / Carton]
591.5 ml Sausage Packs
[12 Sausages / Carton]
591.5 ml Sausage Packs
[12 Sausages / Carton]
Color Available White, Black, Limestone, Light Grey,
Aluminum Grey, Dark Grey, Precast White,
Bronze
White, Black, Dark Grey, Precast White,
Bronze
White, Black, Limestone, Light Grey,
Aluminum Grey
Country of Origin The Netherlands China The Netherlands
Conformance to ASTM and Federal Specifications
ASTM C-920, Type S, NS, Class 50
ASTM C-1184 (Limestone) ASTM C-920, Type S, NS, Class 50
CH
AP
TE
R 6
: W
ea
the
rpro
ofi
ng
Se
ala
nts
13
GE Weatherproofing Silicone Sealants
GE AP 3600 GE Silglaze® N-10
Uses, Applications One Part, Neutral-Cure, Semi Matte Finish sealant for
glazing and general applications.
One Part, Fast curing, all purpose neutral-cure sealant for
weatherseals, glazing and general applications
Tested for Fugal Resistance by PSB Singapore.
Primerless Adhesion to: (Test applications always recommended to
verify adhesion under actual use conditions.)
� Glass
� Stone
� Most metals
� Mosaic
� Concrete & Masonry
� Glass
� Most glass coatings
� Most paints
� Most Metals
� Concrete & Masonry
Dynamic Joint Movement ASTM C719
(Continuous extension and compression, 1/8” per hour)
± 25 % ± 25 %
Minimum Joint Dimensions (Width x depth)
6 mm x 6 mm 6 mm x 6 mm
Maximum Joint Dimensions (Width x depth)
50 mm x 9.5 mm 50 mm x 9.5 mm
Tooling Time [27oC @ 50% R.H.]
15 minutes 10 minutes
Tack-Free Time (Fed. Spec. TT-S-001543A)
40 minutes 30 minutes
Cure Time [To 3/8” depth @ 27oC and 50% R.H.]
2 days 2 days
Application Temperature Range + 4 to + 49oC + 4 to + 43oC
Performance Range -48 to 149oC
Up to 177 oC
-48 to 149oC
Up to 204 oC
(under intermittent exposure)
Hardness (Shore A) (ASTM D2240)
26 26
Tensile Strength (ASTM D412)
218 psi 240 psi
Peel Strength (ASTM C794)
18.6 lbf 25 ppi
PSI Stress @ 50% Extension (1/2” x 3/8” x 2” bead) - -
Ultimate Elongation (ASTM D412) 400 % 350 %
Sag/ Slump <2 mm 0 mm
VOC 30 g/L 37 g/L
Cure Method Alkoxy (Neutral) Ketoxime (Neutral)
Packaging 500 ml Sausage Packs
[20 Sausages / Carton]
310 ml Cartridges
[10 or 24 Cartridges / Carton]
Color Available Black, Limestone
Clear, White, Light Gray, Aluminum Gray, Gray, Dark Brown,
Black, Beige
Country of Origin Korea Japan / Thailand
Conformance to ASTM and Federal Specifications ASTM C-920, Type S, NS, Class 25, JIS A1439
ASTM C-920, Type S, NS, Class 25
JIS A5758
CH
AP
TE
R 7
: M
od
ifie
d S
ilic
on
e S
ea
lan
ts
14
SHARPIE Modified Silicone Sealants
SHARPIE M MSC1-01
SHARPIE LM MSC1-14
SHARPIE NB-LM MSC1-03
SHARPIE Megahard One MSC1-06
Uses, Applications One-part, non-stain non-bleed,
Medium Modulus Neutral-cure
Modified Silicone sealant for
weathersealing applications
Tested to meet cleanroom class 100 [ISO Level 5] and below.
Tested for Fugal Resistance by
PSB Singapore.
One-part, non-stain non-bleed,
low Modulus Neutral-cure
Modified Silicone sealant for
weathersealing applications
One-part, non-stain non-bleed,
Low Modulus Neutral-cure,
non-bleed Modified Silicone
sealant for weathersealing
applications. Engineered to
prevent Zero stain on over-
coated paint
One-part, non-stain non-bleed,
High Modulus Neutral-cure
Modified Silicone sealant for
weathersealing applications.
Engineered for high human traffic conditions
Primerless Adhesion to: (Test applications always
recommended to verify
adhesion under actual use
conditions.)
� Fluoropolymer
� Powder coated Paints
� Conversion-coated / anodized aluminium
� Brick
� Terracotta
� Ceramic
� Porcelain
� Concrete
� Natural stones
� Prefabricated panels
Dynamic Joint Movement ASTM C719
(Continuous extension and
compression, 1/8” per hour)
± 50 % +100/ -50 % +100/ -50 % ± 25 %
Minimum Joint Dimensions (Width x depth)
6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm
Maximum Joint Dimensions (Width x depth)
50 mm x 25 mm 50 mm x 25 mm 50 mm x 25 mm 50 mm x 25 mm
Tack-Free Time 1 hour 1 hour 1 hour 20 minutes
Cure Time [Thickness 6mm]
2 – 3 days 2 – 3 days 2 – 3 days 1 – 2 days
Performance Range -30 to 90 oC -30 to 90 oC -30 to 90 oC -30 to 90 oC
Hardness (Shore A) (ASTM D2240)
27 20 25 55
Tensile Strength @ Maximum Tensile Stress
117.48 psi 137.79 psi 101.5 psi 261.07 psi
Peel Strength (ASTM C794)
39.4N 31.2N 40.1N 31.7N
PSI Stress @ 50% Extension
69.62 psi 20.31 psi 17.40 psi 145.04 psi
Ultimate Elongation (Aluminum Substrate with
Primer) 260% 780% 550% 170%
Elastic Recovery 75% 67% 42% -
Density 1.39 g/ml 1.39 g/ml 1.36 g/ml 1.40 g/ml
Cure Method Neutral Neutral Neutral Neutral
Packaging 320 ml Cartridges
(10 Cartridges / Carton)
320 ml Cartridges
(10 Cartridges / Carton)
320 ml Cartridges
(10 Cartridges / Carton)
320 ml Cartridges
(10 Cartridges / Carton)
Color Available White, Black, Grey, Light Grey,
Beige
White, Black, Dark Grey, Light
Grey White, Black, Brown Red Black, Light Grey
Please refer to product representative for other colors
Country of Origin Japan Japan Japan Japan
Conformance to ASTM and Federal Specifications
ASTM C920, Type S, Grade NS,
Class 50, Use A,
JIS A 5758
ASTM C920, Type S, Grade NS,
Class 50, Use A,
JIS A 5758
ASTM C920, Type S, Grade NS,
Class 50, Use A,
JIS A 5758
ASTM C920, Type S, Grade NS,
Class 50, Use A,
JIS A 5758
CH
AP
TE
R 8
: S
pe
cia
lty S
ea
lan
ts
15
Specialty Sealants
GE PENSIL® 300 Firestop Joint Silicone Sealant
VAROSEAL® Polyurethane (PU) Sealant
GE TOSSEAL® 811 & 817 Expansion Joint Silicone Sealant
TOSSEAL® 811 [Tooling Required]
TOSSEAL® 817 [Self- Leveling]
Uses, Applications One- part neutral silicone firestop
sealant for use as a component in
fire rated joint systems, especially
designed for use in static or
expansion joints and will provide
a weather- tight seal.
Low modulus & long life
minimizes strain on substrate
surface & the elastomeric quality
allows excellent recovery from
extension & compression cycling.
2-hour fire rated. Suitable for seal in vertical &
horizontal joints between metals,
masonry, concrete and other
common construction materials.
One-part, paintable sealant.
Suitable for cold room & clean
room Class 1000 [ISO Level 6] and below.
One-part, neutral-cure, low modulus joint silicone sealant for
concrete roads and pavements.
Room temperature cure. Easy gunnability over a wide temperature
range.
Superior high & low temperature resistance.
Outstanding Weatherability and water resistance.
Extreme low modularity allows excellent recovery from compression
and expansion. Excellent candidate for concrete joints that subjected
to relatively high join movement.
Suitable for road joints, expansion joints, warehouse floor joints,
parking deck joints, stadium stand joints, etc.
Primerless Adhesion to: (Test applications always
recommended to verify
adhesion under actual use
conditions.)
� Glass
� Stone
� Most paints
� EIFs
� Most metals
� Glazed
surfaces
� Concrete
and
masonry
� Concrete &
masonry
� Bathroom &
plumbing
fixtures
� Natural
stone
� Most metal
� Concrete & masonry
� Precast Concrete
� Asphalt
� Most paints
� Most metals
� Wood
� Ceramics
Dynamic Joint Movement ASTM C719
(Continuous extension and
compression, 1/8” per hour)
± 50 % ± 25 % + 100% / - 50 %
Minimum Joint Dimensions (Width x depth)
6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm
Maximum Joint Dimensions (Width x depth)
50 mm x 9.5 mm 50 mm x 9.5 mm 50 mm x 9.5 mm 50 mm x 9.5 mm
Tooling Time [27oC @ 50% R.H.]
30 minutes 30 minutes 10 minutes N.A.
Tack-Free Time (Fed. Spec. TT-S-001543A)
3 hours 3 to 5 hours 50 minutes 1 to 2.5 hours
Cure Time [6mm depth @27oC, 50%
R.H.]
5 to 7 days 24 hours max 5 to 7 days 5 to 7 days
Application Temperature Range + 4 to + 49oC + 4 to + 43oC + 4 to + 43oC + 4 to + 43oC
Performance Range - 48 to 149oC -48 to 80oC - 48 to 149oC - 48 to 149oC
Hardness (Shore A) (ASTM D2240)
50 <40 12 8 (@-29oC)
51 (@23oC)
Tensile Strength (ASTM D412)
270 psi <426 psi 203 psi 124 kPa
Peel Strength (ASTM C794)
55 ppi 20 ppi 40 ppi 40 ppi
Chemical Resistance Yes No - -
FDA- Approved No No - -
Ultimate Elongation (ASTM D412) 500% 1050 % 1050 %
Sag/ Slump 2.5 mm max 2 mm max 2.5 mm max 2.5 mm max
Cure Method Alkoxy (Neutral) Humidity Cure Neutral Neutral
Packaging 300ml Cartridge
[24 Cartridges / Carton]
500ml Sausage Packs
[20 Sausages / Carton] 591.5 ml Sausage 20kg Pail
Color Available Limestone, White Off- White, Grey Light Grey Light Grey
Country of Origin USA Korea Japan Japan
Conformance to ASTM and Federal Specifications
ASTM C-920, Type S, NS, Class 50
ASTM E814,
BS 476: Part 22: 1987
UL 1479 (System)
ASTM C-920, Type S, NS, Class 25
JIS A5758,
RTA QA R83.4 Specs. For Road
Seals (Australia)
ASTM D5893-04,
RTA QA R83.4 Specs. For Road
Seals (Australia)
CH
AP
TE
R 8
: S
pe
cia
lty S
ea
lan
ts
16
Specialty Sealants
GE TOSSEAL® 78 Super Transparent [Fast Cure]
GE TOSSEAL® 83 [Mildew Resistant]
GE TOSSEAL® 83 AB Anti- Bacterial, Mildew Resistant
GE SEAL IT RIGHT – 168S Sanitary Silicone Sealant [Mildew Resistance]
Uses, Applications One-part, acetoxy type sealant
designed for use in glass-to-glass
glazing.
Cure to a highly durable silicone
rubber on exposure to
atmospheric moisture at room
temperature, and after curing,
has a highly transparent
appearance, much like glass
itself.
Designed for use in glass- to-
glass interior glazing.
Can also be used for adhesive on
showcase assemblies and for
units in optical instruments,
where transparency is a
requirement.
One part, high modulus,
neutral cure silicone sealant
which resists mildew growth
even under prolonged
exposure to high
temperature and humidity.
Suitable for use in sanitary,
plumbing, ACMV and
ceramic tile.
One part, high modulus,
neutral cure silicone sealant
which resists mildew and
bacteria growth even under
prolonged exposure to high
temperature and humidity.
Suitable for use in sanitary,
plumbing, ACMV and ceramic
tile.
One-part, Mildew resistant, durable
high modulus silicone sealant.
For bathtubs, sinks, showers, kitchen
and bathtub plumbing fixtures and
ceramic tiles.
Primerless Adhesion to: (Test applications always
recommended to verify
adhesion under actual use
conditions.)
� Glass � Glass � Ceramics
� Glass
� Plastic
s
Metal
s
� Ceramics
� Glass
� Plastics
� Metals
� Ceramic
� Glass
� Most metals
� Most plastics
Dynamic Joint Movement ASTM C719
(Continuous extension and
compression, 1/8” per hour)
± 25 % ± 25 % ± 25 % ± 25 %
Minimum Joint Dimensions (Width x depth)
6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm
Maximum Joint Dimensions (Width x depth)
50 mm x 9.5 mm 50 mm x 9.5 mm 50 mm x 9.5 mm 50 mm x 9.5 mm
Tooling Time [27oC @ 50% R.H.]
5 minutes 10 minutes 10 minutes
Tack-Free Time (Fed. Spec. TT-S-001543A)
5 to 10 minutes 25 minutes 25 minutes 10 minutes
Cure Time [6mm depth @27oC, 50%
R.H.]
1 to 2 days 2 days 2 days 7 – 14 days
Application Temperature Range + 4 to + 43oC + 4 to + 49oC + 4 to + 49oC + 4 to + 49oC
Performance Range - 48 to 149oC -48 to 149oC -48 to 149oC N.A.
Hardness (Shore A) (ASTM D2240)
- 22 22 20
Tensile Strength (ASTM D412)
- 0.81 MPa 0.77 MPa 232
Peel Strength (ASTM C794)
- 28 N N.A. N.A.
Chemical Resistance N.A N.A N.A N.A
FDA- Approved N.A N.A N.A N.A
Ultimate Elongation (ASTM D412) 150 % 170 % 160 % 360%
Sag/ Slump N.A 0 mm 0 mm <1 mm
Cure Method Acetoxy Ketoxime (Neutral) Ketoxime (Neutral) Humidity Cure
Packaging 333ml Cartridges 333 ml Cartridge 333 ml Cartridge
300 ml Cartridges
[24 Cartridges / Carton]
Color Available Transparent (Super Clear) Clear, White, Ivory White, Ivory, Light Grey White, Clear
Country of Origin Japan Japan Japan N.A.
Conformance to ASTM and Federal Specifications JIS A 1439
ASTM C920, Class 25
JIS Z 2911
ASTM C920, Class 25
JIS Z 2911 JIS A 1439
CH
AP
TE
R 8
: S
pe
cia
lty S
ea
lan
ts
17
Specialty Sealants
TOSSEAL 80-SC [SUPER CLEAN)
GE Multisil™ SCS5500
x’traseal x’mastic Non- Skinning Mastic Sealant (Non- Drying)
EGOSTIK EG-130 No More Nails
Uses, Applications On-part, alkoxy cure sealant
with low-molecular-weight
siloxane content, designed for
clean room use for the
production of semiconductor
and precision electronic devices. Tested to meet cleanroom Class 1 [ISO Level 3] and below.
One-part, neutral cure sealant
specially developed for plastics
and polycarbonates application
One-part, non-drying polybutene
rubber based mastic that does not
harden but remains rather
permanently soft and paste-like.
Excellent resistance to water vapour
transmission.
Low shrinkage.
For installation of cold storage room
and prefabricated construction.
One-part, high performance
construction adhesive sealant with
strong initial grab and superior
adhesion.
Formulated to bond with a wide
variety of common construction
materials.
Primerless Adhesion to: (Test applications
always
recommended to
verify adhesion
under actual use
conditions.)
� Concrete
� Mill finish aluminum
� Galvanized steel
� Glass
� Glazed surfaces
� Glass blocks
� Metal
� Many plastics
� Most plastics
� Most metals
� Glass
� Wood
� Concrete & masonry
� Wood
� PVC
� Particleboard
� Concrete
� Most metals
� Cement
� Brick
Dynamic Joint Movement ASTM C719
(Continuous
extension and
compression, 1/8” per hour)
± 25 % ± 50 % < 5 % -
Minimum Joint Dimensions (Width x depth)
6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm -
Maximum Joint Dimensions (Width x depth)
50 mm x 9.5 mm 50 mm x 9.5 mm N.A. -
Tooling Time [27oC @ 50% R.H.]
5 minutes 30 minutes 10 minutes -
Tack-Free Time (Fed. Spec. TT-S-
001543A)
40 minutes 3 hours 20 minutes -
Cure Time [To 3/8” depth @ 27oC and 50% R.H.]
5 – 7 days 5 - 7 days 3 – 5 days 1 – 3 days
Application Temperature Range
+ 4 to + 43oC + 4 to + 43oC + 4 to + 43oC - 20 to 38 oC
Performance Range NA -48 to 149oC -40 to 80oC - 30 to 60 oC
Hardness (Shore A) (ASTM D2240)
38 25 26 -
Tensile Strength (ASTM D412)
290 psi 270 psi N.A -
Peel Strength (ASTM C794)
N.A. 55 ppi N.A -
Ultimate Elongation (ASTM D412)
410% N.A. N.A -
Sag/ Slump 0 mm 2.5 mm max 2.5 mm max -
Cure Method Alkoxy Acetoxy N.A -
VOC -
Packaging 333 ml Cartridges
[10 Cartridges / Carton] 300 ml Cartridges,
300 ml Cartridges
[24 Cartridges / Carton]
345ml Cartridges
[24 Cartridges / Carton]
Color Available White, Light Grey, Ivory, Light
Ivory
Translucent, White, Black, Grey,
Brown White Brown
Country of Origin Japan The Netherlands Malaysia Malaysia
Conformance to ASTM and Federal Specifications
N.A.
ASTM C-920,
FDA (21 CFR 175.105)
NSF Std: No. F51, ASTM C-1184
N.A N.A
CH
AP
TE
R 9
: G
en
era
l P
urp
ose
Se
ala
nts
18
General Purpose Sealants
GE SEAL IT RIGHT - 168 [Mildew Resistance]
GE ALL PURPOSE 268 [Mildew Resistance]
LIBERTY 405 Acrylic Sealant
EGOSTIK EG-120 No More Gap Acrylic Sealant
Uses, Applications One part, fast cure, high
modulus, Mildew Resistance,
silicone sealant. Excellent
temperature resistance, water
resistance, and outstanding
weatherability.
For glass-to-glass and glass-to-
metal sashing; For pre-fabricated
housing, freight containers, cold
storage rooms interior sealing in
building & housing
One part, fast cure, high modulus
Mildew Resistance, silicone
sealant. Superior high/low
temperature resistance, water
resistance, and outstanding
weatherability.
For general glazing, interior &
exterior building joints, doors,
windows, metal roofing &
gutters, flashings, sanitary
applications.
Suitable for ACMV installation in
ductwork to ensure excellent
Indoor Air Quality (IAQ).
One-part, water-based acrylic
sealant that cures to a tougher
cured sealant. Almost odour
free, non-corrosive towards
metal. Paintable with most paint. Good weather ability & UV
stability for general glazing &
joints application.
Suitable for use in ACMV
Ductwork
One-part, high modulus,
Mildew Resistant, non-
sagging, acrylic sealant.
Paintable with most paint, with
good adhesion to most porous
surfaces.
Primerless Adhesion to: (Test applications always
recommended to verify
adhesion under actual use
conditions.)
� Glass
� Most metals
� Stone
� Concrete and masonry
� Numerous construction
materials
� Glass
� Most metals
� Most plastics
� Wood
� Concrete
� Most metal
� Marble
� Wood
� Concrete
� Most metal
� Marble
Dynamic Joint Movement ASTM C719
(Continuous extension and
compression, 1/8” per hour)
± 25 % ± 25 % ± 5 to 12.5 % ± 10 %
Minimum Joint Dimensions (Width x depth)
6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm
Maximum Joint Dimensions (Width x depth)
50 mm x 9.5 mm 50 mm x 9.5 mm 25 mm x 9.5 mm 25 mm x 9.5 mm
Tooling Time [27oC @ 50% R.H.]
10 minutes 30 minutes 5 minutes 10 minutes
Tack-Free Time (Fed. Spec. TT-S-001543A)
20 minutes 25 minutes 10 minutes 30 minutes
Cure Time [To 3/8” depth @ 27oC and
50% R.H.]
24 hours max 2 days 7 – 14 days 7-14 days
Application Temperature Range + 4 to + 49oC + 5 to + 60oC + 5 to + 50oC + 5 to + 50oC
Performance Range -48 to 149oC -48 to 280oC -10 to 80oC -10 to 75oC
Hardness (Shore A) (ASTM D2240)
40 26 ≈40 ≈30
Tensile Strength (ASTM D412)
290 psi N.A. N.A. N.A.
Peel Strength (ASTM C794)
N.A. 26 ppi N.A. N.A.
Ultimate Elongation (ASTM D412)
200 % N.A. N.A. N.A.
Sag/ Slump <1 mm max <1 mm 2 mm max 0 mm
Cure Method Ketoxime (Neutral) Neutral Humidity Cure Humidity Cure
Packaging 300 ml Cartridges
[24 Cartridges / Carton]
300 ml Cartridges
[24 Cartridges / Carton]
Approx. 300 ml Cartridges
[24 Cartridges / Carton] TBA
Color Available Clear, White, Black, Light Gray Clear, White, Black, Light Gray White, Grey White, Grey
Country of Origin Thailand Thailand Malaysia Malaysia
Conformance to ASTM and Federal Specifications ASTM C-920, Type S, NS, Class 25
JIS A 1439 ASTM C-920, Type S, NS, Class 25
ASTM C-920, Type S, NS, Class
25 TBA
TESTED TO BS 476-7
CH
AP
TE
R 1
0:
Co
nst
ruct
ion
Se
ala
nt
Pri
me
rs /
Cle
an
ing
Ag
en
t
19
GE Construction Sealant Primers
GE SS4044P GE SS4004P GE TOSPRIME C
Description GE’s branded construction sealant primers are designed to help promote strong & consistent adhesion of GE branded construction sealants
to surfaces that may be difficult to bond to.
These primers are supplied ready- to- use (i.e. no mixing required) as an easily pourable solution and are intended for application to clean,
dry, frost- free, sound surfaces just prior to sealant installation.
* Trial applications are strongly recommended to verify chemical compatibility
Technical information, laboratory facilities and application engineering are available from Momentive Performance Materials.
Enhanced Adhesion to � Anodized & painted aluminum, mill
� Conversion- coated aluminum, metals &
galvanized metals, copper, brass
� Painted & stainless Steel
� Brick
� Concrete
� Stone
� Terra cotta
� Unglazed ceramics
� Plastics
� Wood
� EIFS
� Anodized & painted aluminum, mill
� Conversion- coated aluminum, metals &
galvanized metals, copper, brass
� Painted & stainless steel
� Brick
� Concrete
� Stone
� Terra cotta
� Unglazed ceramics
� Plastics
� Wood
Color Translucent Clear Translucent Pink
Clear / Colorless
Dry Time (Colder Environment) 5 to 15 minutes 5 to 15 minutes 5 to 15 minutes
Dry Time (Warmer Environment)
3 to 5 minutes 3 to 5 minutes 3 to 5 minutes
Solids Content 15 % 15 % 6 %
Specific Gravity 0.80 0.80 0.91
VOC 636 g/L 624 g/L 859 g/L
Packaging 500 ml Bot 300 ml Bot
Country of Origin USA
Cleaning Agent Isopropyl Alcohol (IPA) Xylene Colourless liquid with a pleasant odour. Completely soluble in water, alcohol and ether.
High purity cleaning agent for façade and other applications.
Also suitable for cleaning any substrates or equipment before installation in Clean room.
Density, @ 15oC 0.788 to 0.809 kg/ L 0.865 to 0.875 kg /L
Distillation range, Initial Boiling Point Dry Point
≥ 81.9oC
≤ 83.3 oC
≥ 135oC
≤ 155oC
Acidity as acetic acid ≤ 0.05 m/m % -
Water ≤ 0.1 wt% -
Residual on evaporation ≤ 5 mg/ 100 ml -
Water miscibility No Opalescence -
Purity ≥ 99.5 m/m % -
Colour, Pt- Co Scale ≤ 10 ≤ 20
Appearance Bright & Clear
Free of Sediment
Clear
Free of Sediment & Haze
Packaging 5 Liter Can; 20 Liter Tin 5 Liter Can; 20 Liter Tin
CH
AP
TE
R 1
1:
Aco
ust
ic /
Th
erm
al I
nsu
lati
on
-
Min
era
l W
oo
l
20
KM Mineral Wool
KM Mineral Wool Board/ Slab
Model Board/ Slab Uses, Applications Outstanding thermal insulation and sound absorption performances.
Core for sound proof walls, fire protection and fire- proofing structures.
Ideal insulation for various tanks, boilers, and thermal equipments.
Also suitable for concrete slab floors and roof decks.
Can be applied with wire mesh, aluminum foil, metal lath, etc.
Density, kg/m3 ASTM D1667 60 80
100
120 140 160
180 200
Thermal Conductivity
20oC 0.036 0.035 0.036 0.038
70oC 0.049 0.044 0.043 0.044
Thermal Shrinkage, oC > 600
Performance Range, oC -20 to 600
Moisture Resistance ASTM C 1104
< 0.02 Vol%
Corrosive Resistance Performance ASTM C 795
< 20ppm soluble chlorides
Thickness Available, mm 25, 50, 75, 100
Width, m 0.6
Length, m 1.2
Packaging Shrink- wrapped polythene
Conformance to ASTM and Federal Specifications
BS 476 : Part 4 : 1970 – Incombustibility
KS L 9103; JIS A 9504
KS F 2805
ASTM C 795 ; USAEC Regulation Compliance
HB – Mark; GR Certification; Environment- Mark;
Noise Reduction KS F2805
Density ( kg/m3)
Frequency (Hz) Noise Reduction Coefficient 250 500 1000 2000
60 0.723 0.954 0.839 0.689 0.801
80 0.684 1.003 0.791 0.690 0.792
100 0.957 1.045 0.892 0.762 0.914
120 0.966 1.031 0.851 0.725 0.893
TESTED TO BS 476-4
CH
AP
TE
R 1
1:
Aco
ust
ic /
Th
erm
al I
nsu
lati
on
- G
lass
Wo
ol
21
KM Glass Wool
KM Glass Wool Blanket Roll
KM Glass Wool Slab
Model Blanket Roll Slab Uses, Applications Compression- packaged into elastic rolls, Clean Roll offers
excellent recovery capability for convenient transportation and
storage, and its light weight and flexibility make applications on
complex layout patterns a breeze.
Ideal thermal and acoustic insulation in buildings (ceilings, walls,
etc.), for heating systems in buildings and commercial spaces
(tank, duct, etc.), for residential water boilers.
Agricultural thermal insulation applications (stables,
greenhouses, warehouses, etc.).
Can be applied with aluminum foil, Kraft paper, vapor barrier, etc.
Clean Mat takes Glass Wool that has been manufactured in a state-
of-the-art facility and wraps it with moisture proof film for enhanced
applicability and condensation prevention performance.
Offering both thermal insulation and sound absorption, Clean Mat
requires no additional moisture proofing called for by the Energy
Saving Design Standards, making it very convenient to work with and
highly economical.
Ideal for residential thermal/ acoustic insulation (ceilings and walls).
Density, kg/m3 ASTM D1667
24, 32 24 32 (High)
Thermal Conductivity
20oC 0.036 0.036 0.034
70oC 0.045
Thermal Shrinkage, oC > 300
Performance Range, oC -20 to 600
Moisture Resistance ASTM C 1104
1.4 % (Weight %)
Corrosive Resistance Performance ASTM C 795
< 120ppm soluble chlorides
Thickness Available 25 50 75
20 kg Width, m 1.0
Length, m 10 5 3
Packaging Shrink- wrapped polythene
Country of Origin Korea
Noise Reduction KS F2805
Density ( kg/m3)
Thickness (mm)
Frequency (Hz) Noise Reduction Coefficient 250 500 1000 2000
24
25 0.20 0.45 0.69 0.86 0.55
50 0.64 0.98 1.06 1.04 0.93
75 0.69 0.89 0.95 0.99 0.88
100 0.94 1.07 1.08 1.06 1.04
32 50 0.54 0.92 1.05 1.04 0.89
40 50 0.53 0.91 1.01 1.03 0.87
48
25 0.25 0.61 0.90 1.02 0.70
50 0.59 0.97 1.08 1.07 0.93
75 0.92 1.10 1.05 1.05 1.03
100 1.03 1.06 1.05 1.07 1.05
64
25 0.20 0.56 0.90 1.01 0.67
50 0.64 0.99 1.07 1.05 0.94
75 0.97 1.02 1.03 1.05 1.02
100 0.99 0.99 1.04 1.05 1.02
80 50 0.71 1.00 1.02 1.03 0.94
TESTED TO BS 476-4
TESTED TO BS 476-4
CH
AP
TE
R 1
1:
Aco
ust
ic /
Th
erm
al I
nsu
lati
on
– E
PD
M C
lose
d C
ell
In
sula
tio
n
22
Insulation Material
MAXFLEX® EPDM Closed Cell Elastomeric Insulation
MAXFLEX® EPDM Closed Cell Elastomeric Insulation without Halogen (Bromide & Chloride)
MAXFLEX® EPDM Closed Cell Elastomeric Insulation
MAXFLEX®EPDM Closed Cell Elastomeric Insulation with Foil- Scrim- Kraft (FSK)
Model MaxFlex ST - Standard MaxFlex HF – Halogen Free MaxFlex HT – High Temp. MaxFlex AL Clad P Uses, Applications For refrigeration, air conditioning,
heating & plumbing applications
Absence of Halogen (Without
Chloride & Bromine ions) & PVC
avoid corrosion of Stainless Steel
tube & in case of fire, minimal
smoke & toxic emission.
Dioxin Free, CFC / HCFC Free, ODP
Free
For Indoor Installation in:
Industrial Plants, Public Transports,
Laboratories, Clean room, Data
centre, Naval Industry
Suitable for Outdoor Installation
with High Temperature Fluid:
� Industrial Plants
� Heating Plants
� Solar Installation
� Hot Pipes, etc.
Additional Aluminum or Foil-
Scrim- Kraft Cladding for
MAXFLEX
Flammability
� Self Extinguishing (ASTM D 635) � UL 94 HV / HB � Class ‘1’ (BS 476 Part 7) � Class ‘0’ (BS 476 Part 6)
Density, kg/m3 ASTM D1667
68.7
Thermal Conductivity (Width x depth)
-40 -30 -20 -10 0 10 20 30 40
0.029 0.030 0.031 0.032 0.033 0.033 0.034 0.035 0.036
Water Absorption ASTM D1056
1.5
Heat Stability ASTM C 534
[Dimensional Change]
3.5
UV / Ozone Resistance ASTM D 1171
Excellent
Moisture Resistance, µ DIN 52615
1250
Moisture Vapor Transmission, g/m2h ASTM E 96
≈ 0.47
Moisture Permeability, g/Pa.s.m ASTM E 96
9.35 x 10-11
Performance Range -57 to 125oC -57 to 150oC -57 to 180oC -48 to 149oC
MaxFlex harden at -57oC, but can be used even at -200oC
Fungus/ Mildew Resistance ASTM G 21
Passed Passed Passed Passed
Nitrosamine BS EN 12868
Not Detected
RoHs BS EN 12868
Not Detected
Noise Reduction DIN 52 219
36.3 dB
Form Tubes in 2m length, Sheets, Continuous Tubes/ Sheets
Available in FSK (Foil- scrim- kraft), Aluminum Foil lamination and Adhesive Layer
Dimension Available For Enquiries, please contact Sales Representative Packaging
Country of Origin Thailand
TESTED TO BS 476-6
TESTED TO BS 476-7
CH
AP
TE
R 1
1:
Aco
ust
ic /
Th
erm
al I
nsu
lati
on
– F
ibe
rGla
ss I
nsu
lati
on
Ta
pe
23
Insulation Material
KM FIBERGLASS GASKET TAPE
KM FIBERGLASS GASKET TAPE SERIES AGB
Uses, Applications Heavy duty, non-combustible, non-alkali fiberglass gasket tape
with high temperature, oil & grease, and chemical resistance.
Excellent for wrapping tracer steam lines, hose piping, exhaust
manifold insulation wrap, ACMV Exhaust Duct joints and strip
curtains for high temperature ovens.
Heavy duty, non-combustible, non-alkali fiberglass gasket tape with high
temperature, oil & grease, and chemical resistance.
Excellent for wrapping tracer steam lines, hose piping, exhaust manifold
insulation wrap, ACMV Exhaust Duct joints and strip curtains for high
temperature ovens.
Engineered to provide Excellent Oil Repellency & Hydrocarbon Resistance
Thread Count (Warp) 60 per 10cm
Thread Count (Weft) 23 per 10cm
Tearing Strength (Wrap) 640N / 10 x 200-M
Tearing Strength (Weft) 640N / 10 x 200-M
Density 1850 g/m2
Maximum Temperature Resistance 786.4oC
Classification of Fire Reaction: BS EN 13501-1: 2007 +A1: 2009
Combustibility: BS EN ISO 1716 : 2010
Non Combustibility: BS EN ISO 1182 : 2010
Oil Repellency: Hydrocarbon Resistance N.A AATCC Test Method 118-2012 (Grade 8)
Color White
Dimension / Packing Available
T3mm x W19mm x L30m (20rolls / box)
T3mm x W25 mm x L30m (16rolls / box)
Country of Origin Singapore
CH
AP
TE
R 1
2:
Fo
am
/ A
dh
esi
ve
Ta
pe
s
24
Foam / Adhesive Tapes
MaxDuctTape®
MaxTape® KM Aluminum Foil Tape VitalBand Bitumen Tape
Model 50525 VT-420 Uses, Applications Self Adhesive EPDM/ Neoprene
Gasket Foam Tape for air-duct
flange connection
Self Adhesive EPDM elastomeric
Insulation foam Tape with good
tacking strength & long service
life.
Excellence adhesion to all surface
without delamination problem
Joint sealing of Foil- Laminated
fiberglass insulation
For sealing joints, seams against
moisture & vapor penetration
on foil jacketing insulation
Cold applied instant flashing,
sealing and weatherproofing
tape with outstanding
durability.
Designed to provide excellent
adhesion, heat, tear, puncture
and chemical resistance to
chlorides, sulphates, alkalis and
acids.
Flammability � Self Extinguishing (ASTM D 635) � UL 94 HV / HB � Class ‘1’ (BS 476 Part 7) � Class ‘0’ (BS 476 Part 6)
- -
Density, kg/m3 ASTM D1667
68.7 - -
Water Absorption ASTM D1056
< 5 % by weight - -
Heat Stability ASTM C 534
[Dimensional Change]
3.5 - -
UV / Ozone Resistance ASTM D 1171
Excellent - -
Moisture Resistance, µ DIN 52615
1250 - -
Moisture Vapor Transmission, g/m2h ASTM E 96
≈ 0.47 - -
Moisture Permeability, g/Pa.s.m ASTM E 96
9.35 x 10-11 - -
Performance Range -57 to 125oC -40 to 90oC -
Fungus/ Mildew Resistance ASTM G 21
Passed Passed - -
Nitrosamine BS EN 12868
Not Detected Not Detected - -
Thickness Available 6 mm 3 mm to 50 mm 33 µm 1.5 mm
Dimension Available For enquiries, please contact Sales Representative Packaging
TESA 60100 Fibreglass Tape
tesa®60100 self- adhesive fibreglass tape features the latest developments
in joint tape technology. Excellent aging resistance.
With its very strong & flat fibreglass mesh, it offers durable & long lasting
drywall/ plaster board joints. Very good tear resistance.
Excellent adhesion & the very good tensile strength allow one- time
application & smooth finished joints.
Applications � For fixing & patching small holes and cracks.
� For joining plasterboards
Backing Material Fibreglass
Type of adhesive Acrylic
Adhesion to steel 0.5 N/ cm
Elongation at break 2 %
Tensile strength 49 N/ cm
Total thickness 330 µm
Dimension Please check with Sales Rep.
Color White
TESTED TO BS 476-6
TESTED TO BS 476-7
TESTED TO BS 476-6
TESTED TO BS 476-7
CH
AP
TE
R 1
3:
Fa
çad
e P
rote
ctio
n F
ilm
/ T
ap
e
25
Protective Film / Tape for Glass & Metal
KM Polyethylene (PE) Protection Film / Tape – 8C-G-GREEN-01
KM Polyethylene (PE) Protection Film / Tape – 5C-G-BLUE-02
KM Polyethylene (PE) Protection Film / Tape – 8C-M-Blue-WN-04
KM Polyethylene (PE) Protection Film / Tape – 8C-M-Blue-WN-05
Uses, Applications
� PE protection tape for low adhesion substrate, the tape is coated with water based acrylic emulsion.
� Proven Glue Transfer free on glass and metal.
� Easy to peel off from the protected substrate, no irritant odor.
� High gloss & transparency film with leveling coating surface & no air bubble dots
� Excellent UV resistance & durability
Protection for substrates from being stained, and from scratch or damages during processing & transportation.
Adhesion to: (Test applications always
recommended to verify
adhesion under actual use
conditions.)
� Glass
� Most Powder Coated
Metal Surfaces
� Most Solid Surfaces
� Most Anodized Metal
Surfaces
� Most Solid Surfaces
Material Type
LDPE
(Low Density Polyethylene)
LDPE
(Low Density Polyethylene)
LDPE
(Low Density Polyethylene)
LDPE
(Low Density Polyethylene)
Breaking Strength 18 to 20 MPa 18 to 20 MPa 18 to 22 MPa 18 to 22 MPa
Elongation at break 300 to 400% 300 to 400% 300 to 400% 300 to 400%
180o Peel 20 g/in 20 g/in 320 g/in 320 g/in
Looptack 20 g/in2 20 g/in2 280 g/in2 280 g/in2
Heat Resistance (70oC, 3 kg pressure)
4 Cycles of 24 hr each
No Adhesion Failure No Adhesion Failure No Adhesion Failure No Adhesion Failure
High Humidity (50oC, 95%) Tested for 10
Days
No Adhesion Failure No Adhesion Failure No Adhesion Failure No Adhesion Failureq
Outdoor Aging (6 Months)
No Adhesion Failure No Adhesion Failure No Adhesion Failure No Adhesion Failure
Dimension (Master Log)
T 80 µm x W 1240 mm x L 100
m
T 50 µm x W 1240 mm x L 100
m
T 80 µm x W 1240 mm x L 100
m
T 80 µm x W 1240 mm x L 100
m
Dimension (Silted)
Please check with Sales Rep. Please check with Sales Rep. Please check with Sales Rep. Please check with Sales Rep.
Color Available Translucent Green Translucent Blue
CH
AP
TE
R 1
3:
Fa
çad
e P
rote
ctio
n F
ilm
/ T
ap
e
26
Protective Film / Tape for Glass & Metal
KM PVC Protection Film / Tape – 10C-M-B-01
KM PVC Protection Film / Tape – 10C-M-W-02
KM PVC Protection Film / Tape – 10C-M-W-03
KM PVC Static Protection Film
Uses, Applications PVC protective tape for medium adhesion substrate, the tape is coated with water based acrylic
emulsion and rubber glue
Excellence UV resistance and durability; Chemical resistance
� Good wear resistance
Transparent clear static
dissipative film without any
adhesive.
Formulated protecting
static sensitive components
Adhesion to: (Test applications always
recommended to verify adhesion
under actual use conditions.)
� Most Metals
� Glass
� Mirror
� Ceramic Tiles
Material Type
PVC
(Poly Vinyl Chloride)
PVC
(Poly Vinyl Chloride)
PVC
(Poly Vinyl Chloride)
PVC
(Poly Vinyl Chloride)
Breaking Strength 18 to 22 MPa 18 to 22 MPa 18 to 25 MPa ≥ 13 MPa
Elongation at break 200 to 400% 200 to 400% 200 to 300% ≥ 150%
180o Peel 120 g/in 120 g/in 170 g/in N.A
Looptack 280 g/in2 280 g/in2 230 g/in2 N.A
Heat Resistance (70oC, 3 kg pressure)
4 Cycles of 24 hr each
No Adhesion Failure No Adhesion Failure No Adhesion Failure N.A
High Humidity (50oC, 95%) Tested for 10 Days
No Adhesion Failure No Adhesion Failure No Adhesion Failure N.A
Outdoor Aging (6 Months)
No Adhesion Failure No Adhesion Failure No Adhesion Failure N.A
Dimension (Master Log)
T 100 µm x W 1240 mm x L 100
m
T 100 µm x W 1240 mm x L
100 m
T 100 µm x W 1240 mm x L
100 m
T 90 µm x W 1200 mm x L
500 m
Dimension (Silted)
Please check with Sales Rep. Please check with Sales Rep. Please check with Sales Rep. Please check with Sales Rep
Color Available Black White White Clear
CH
AP
TE
R 1
4:
Pro
tect
ion
Co
ati
ng
fo
r F
aça
de
, B
uil
din
g &
In
teri
or
Wo
rk
27
Temporary Peel-able Protective Coating For Glass & Metal
WindowGOOP MultiGOOP Product Description GOOP is a viscous milky liquid with a slight ammonia odour. GOOP dries to a translucent protective film.
For ease of removal & protection of the underlying substrate, a minimum dry film thickness of 100µm. Due to the highly
thixotropic nature of this product and high viscosity, this is easily achieved by even roller application of a single coat.
A higher film thickness is recommended for exceptionally long service life or unusually abrasive or aggression
conditions, although this is not normally required.
Adhesion to Glass
x Glass
x Aluminium
May be suitable for other materials, recommended substrate test prior to full application.
Density (AS1580 202.1/.2)
1.03 ± 0.03 kg/L 1.05 ± 0.03 kg/L
Viscosity (AS1580 214.1)
120 to 125 Ku (4.8 to 5.0 cps) Thixotropic
Drying Time (100um dry @25oC) 20 mins to 1 hr 30mins to 1 hr
Shelf Life (Unopened Can)
2 Years
Coating Life < 12 Months (For External)
> 24 Months (For Interior)
*Recommended Maximum time is based on exposure data in average conditions. Life may be reduced under extreme
conditions.
Application Temperature 5 to 35oC
Removal Conditions Coating will remove satisfactorily at normal conditions (Typically 0 to 35oC)
Quality Assurance Each batch has undergone stringent QC procedures:
Film appearance, freedom from contaminants, application properties, peel characteristics, pH & performance
Temperature Tolerance Up to 50oC
Color Available Clear
Packaging 20 kg Pail; 200 kg Drum
Country of Origin Australia
CH
AP
TE
R 1
4:
Pro
tect
ion
Co
ati
ng
fo
r F
aça
de
, B
uil
din
g &
In
teri
or
Wo
rk
28
GE SilShield SEC2400 Silicone Architectural Coating
GE SilShield SEC2400 is a high solids, silicone elastomeric coating for use in horizontal & vertical above-
grade waterproofing applications.
It provides a durable, long- term watertight, weatherproof barrier that is not susceptible to color fade,
chalking or degradation from natural weathering.
Primerless Adhesion to � Glass
� Painted Surface
� Stucco
� Masonry
� Concrete
� Urethane Foam
� Wood
� Copper
� Aluminum
� EIFS
Specific Gravity 1.21 g/ ml
Tack Free Time 2 hours
Skin Over Time 30 minutes
Tensile Strength (ASTM D412) 200 psi
Elongation (ASTM D412) 400 %
Crack Bridging 1.59 mm
Elongation at break 2 %
Moisture Vapor Transmission 7.62 Perms (ASTM D1653); 4.67 Perms (ASTM E-94)
VOC 70 g/ L
Packaging Please check with Sales Rep.
Color Please check with Sales Rep.
GE SilShield SEC2500* AWB Silicone air and water-resistive barrier
GE SilShield SEC2500 is an architectural mastic coating for air & water-resistive barrier applications to coat
and seal above-grade wall assemblies.
It provides a durable, long- term protection against air passage and water penetration for an energy
efficient and watertight barrier around the building envelope.
Primerless Adhesion to � Glass
� Painted Surface
� Stucco
� Masonry
� Concrete
� Urethane Foam
� Wood
� Copper
� Aluminum
� EIFS
Tack Free Time 1 - 2 hours
Curing Time 24 hours
Application Temperature Range -10oC to 70oC
Water Vapour Transmission Rate @430um DFT (17mils)
5.5 perms
(ASTM E96)
Nail Sealability @ 430um DFT (17 mils) Passed
ASTM D 1970
UV Exposure 20 + Years
Surface Burning NFPA Class A, UBC Class 1
ASTM E 84
Packaging Please check with Sales Rep.
Color Please check with Sales Rep.
CH
AP
TE
R 1
5:
Ba
ckin
g F
oa
m R
an
ge
fo
r S
ea
lan
t /
Se
ttin
g B
lock
/ W
ate
rpro
ofi
ng
Me
mb
ran
e f
or
Fa
çad
e
29
Spacer Foam Tape (Open / Closed Cell)
KM Breathable Tape (Open- cell) for Structural Glazing & Cladding
KM High Density Ethylene Vinyl Acetate (HD-EVA) Foam (Closed- Cell) for Structural Glazing
Product Description Optimum curing through open cell foam structure which allows air
and moisture to reach silicone. Semi-rigid PU foam substrate is
chemically compatible with all silicones tested.
Condensation prevention on windows, doors and metal systems by
high thermal resistivity of foam substrate.
Superior heat insulation.
Excellent resistance to weather, fungi and oxidation
Excellent balance of high shear resistance adhesion
performance and initial tack.
Outstanding holding power
Optimum curing and prevent air and moisture to reach silicone.
Chemically compatible with all silicones tested. Condensation
prevention on windows, doors and metal systems by high
thermal resistivity of foam substrate. High Temperature
resistance. Excellent resistance to weather, fungi and oxidation
Applications � Structural glazing & cladding
� Good adhesion on aluminum & glass
� Structural glazing & cladding
Sealant Compatibility
� Silicone sealant
� Polyurethane sealant
� Acrylic Sealant
� Butyl sealant
� Polysulfied sealant
� Most cold applied sealant compositions
� Silicone sealant
� Polyurethane sealant
� Acrylic Sealant
� Butyl sealant
� Polysulfied sealant
� Most cold applied sealant compositions
Carrier Urethane HD-EVA
Shape Available Strip / Roll Form Sheet / Roll Form
Density (kg/m3)
497 130 - 140
Adhesive Acrylic Modified Acrylic
Tensile Strength, kPa 1961 1961
Elongation, % 186 140
Application Temperature Range + 16 to + 52oC + 16 to + 52oC
Performance Range - 42 to 82oC
Short Term: <100
Long Term: <200
Hardness (Shore A) (ASTM D2240)
26 50
Dynamic Tensile Adhesion (15-minute dwell) (kPa)
416
(ASTM D-3759) 400
Dynamic Shear Adhesion (kPa) 44 (308)
(ASTM D-1002) (250)
Static Shear Adhesion @ room temperature (1 psi load), hours
2000 +
(ASTM D-3654) N.A.
Thermal Conductivity K factor: (W/m•oC) 0.050 N.A.
Water Absorption < 5% < 5%
Outgasing Potential N.A. N.A.
Thickness Available, mm 6.4 mm; 9.5 mm Please check with Sales Rep.
Dimension Please check with Sales Rep.
Color Available Black
(Blue Liner)
Black
Sheet- Form: Brown Liner Roll- Form: Green Liner
CH
AP
TE
R 1
5:
Ba
ckin
g F
oa
m R
an
ge
fo
r S
ea
lan
t /
Se
ttin
g B
lock
/ W
ate
rpro
ofi
ng
Me
mb
ran
e f
or
Fa
çad
e
30
Sealant Backing Material
KM Polyethylene Closed Cell
Backer Foam for Sealant - Round KM Polyethylene Closed Cell Backer Foam for Sealant - Square
Product Description An ideal non-absorbent compressible and flexible sealant backing composed of predominantly closed celled PE material. Inserted
into a joint to control depth to create a backstop to allow proper sealant tooling, proper sealant wetting of the joint surfaces and
yield a proper bond breaker between the backer and sealant. Chemically inert and waterproof.
Applications � Construction joint
� Glazing work
Sealant Compatibility � Silicone sealant
� Polyurethane sealant
� Acrylic Sealant
� Butyl sealant
� Polysulfied sealant
� Most cold applied sealant compositions
Carrier LDPE PE
Shape Available Round Block
Density (kg/m3) 33 33 ± 3
Tensile Strength, psi (kPa) 463 >160
Elongation, % 160 >80
Application Temperature Range + 16 to + 52oC + 16 to + 52oC
Performance Range -40 to 90oC -40 to 90oC
Thermal Conductivity K factor: BTU•in/hr•oF (W/m•oC) 0.036 0.042
Water Absorption < 5% < 5%
Outgasing Potential No Presence No Presence
Thickness Available, mm Please check with Sales Rep. Please check with Sales Rep.
Dimension Please check with Sales Rep. Please check with Sales Rep.
Color Available White, Grey Off- White; Grey
Conformance to ASTM and Federal Specifications KSM3862 AS2329-80
KM Silicone Seal / Sheet KM Silicone Seal / Sheet Vapour / Waterproofing Membrane for Curtain Wall Facades
Product Description Silicone Rubber Sheet is used to provide vapour control layers and waterproof
barriers for curtain wall.
It is manufactured in accordance with ISO 9001 quality assurance system.
Compatible with all GE Silicone Sealants.
Applications � Spacer under / between two metals
Material Silicone
Specific Gravity (ASTM D297)
1.2 ± 0.1 g/ cm3
Hardness, Shore A (ASTM D2240)
50 ± 5
Tensile Strength (ASTM D412)
≥ 80 kfg/ cm2
Elongation ≥ 350 %
Tear Strength (ASTM D624, Die C) ≥ 22 kfg/ cm
Aging Properties (200oC, 24 hours, ASTM D573)
160
Hardness Change + 16 to + 52oC
Tensile Strength Change -40 to 90oC
Elongation Change 0.036
Dimension Please check with Sales Rep.
Color Available Translucent White
KM Setting Block Range for Glass
Setting block in the form of a spacer for supporting and adjusting a glass
sheet in structure elements, such as windows, doors and the like.
Applications � Setting block for the lower edge of the glass
Material 100% Silicone, SCR, EPDM(Si), EPDM, PVC
Dimension Please check with Sales Rep.
Color Available Black
CH
AP
TE
R 1
6:
Str
uct
ura
l A
dh
esi
ve
Fo
am
Ta
pe
31
Structural Tape
KM Acrylic Foam Pressure Sensitive
Tape
Series 3000C 6000C Product Description Double sided acrylic foam tapes that are durable in extreme weather condition.
Closed cell acrylic foam tapes that can be used to replace mechanical fastener, riveting or spot welding due to its high shear strength
and its ability to withstand vibration, heavy stress load and resistance to hot and cold environment.
Can be used in Automotive, Electronics & Electrical, Signage and Construction industries for its good bonding reliability and ease of
use as compared to regular double sided foam tapes.
Due to Inert nature, suitable as membrane barrier to protect PVB Interlayer of Lamin- Glass from De- Lamination
Applications � Construction joint
� Building construction in sign industry
� Structural glazing & cladding � Construction joint
� Building construction in sign industry
Adhesion to: � Most metals, includes Stainless Steel, Aluminum
� Glass
� Wood
� Concrete & masonry
Carrier Acrylic Foam Acrylic Foam
Adhesive Acrylic Acrylic
Density (kg/m3)
497 33
Tensile Strength (gf/cm2) (T-block) To Aluminum at room
temperature
(ASTM D-897)
≥ 6000 ≥ 5000
Peel Adhesion (gf/25mm) To Stainless Steel at room
temperature, 180o Peel
(ASTM D-3300)
≥ 3400 ≥ 3800
Holding Power (hour) To Stainless Steel at 80oC
Temperature with 1000g Static Load
>24
To Stainless
Steel at room
temperature
(ASTM D-
1002)
After 20-min ≥ 3000 ≥ 2500
After 24-hr ≥ 4500 ≥ 3500
Temperature Tolerance, oC Short Term: 160
Long Term: 100
Thickness Available, mm Please check with Sales Representative Dimension
Length Available, metre 16.5
Color Available Clear
Release Liner Red PE
CH
AP
TE
R 1
8:
ST
I F
ire
sto
p S
yst
em
s O
ve
rvie
w
32
STI F
irest
op S
yste
ms
Prod
uct R
ange
Ove
rvie
w
CH
AP
TE
R 1
8:
Ve
da
Fra
nce
Bu
ild
ing
Jo
ints
Ove
rvie
w
33
VEDA FRANCE Building Joints Product Range Overview
CH
AP
TE
R 1
9:
Re
cen
t P
roje
ct I
nvo
lve
me
nt
34
Recent Iconic Projects Involvement:
Singapore Sports Hub, Singapore, 2014
Gardens by the Bay, Singapore, 2012
South Beach Residences, Singapore, In-Progress
DUO Residences, Singapore, In-Progress
Singapore University of Technology and Design, Singapore, In-Progress
CH
AP
TE
R 1
9:
Re
cen
t P
roje
ct I
nvo
lve
me
nt
35
Resort World Sentosa, Singapore, 2010
IR Marina Bay, Singapore, 2010
Orchard ION, Singapore, 2009
Orchard ION, Singapore, 2010
Ochard Central, Singapore, 2009
Marina Bay Financial Centre, Singapore, 2011
CH
AP
TE
R 1
9:
Re
cen
t P
roje
ct I
nvo
lve
me
nt
36
The Sail, Singapore, 2009
Bio Polis 2, Singapore, 2007
Fusion Polis, Singapore, 2007
Reflection, Singapore,
1st Project using NB9000 (> 10-years since completion)
Enlarged Picture of its Joints:
CH
AP
TE
R 1
9:
Re
cen
t P
roje
ct I
nvo
lve
me
nt
37
VIVO City, Singapore, 2006
Khoo Teck Puat Hospital, Singapore, 2010
Mapletree Business City, 2010
School of Art, Singapore, 2010
LA SALLE ART School, Singapore, 2007
Singapore Flyer, 2007
CH
AP
TE
R 1
9:
Re
cen
t P
roje
ct I
nvo
lve
me
nt
38
Bishan Depot 2014 ALTEZ @ Anson 2014
368 @ BALESTIER ROAD 2014 ANG MO KIO MRT 2014
CARLTON HOTEL @ TANJONG PAGAR 2014 AUSTVILLE 2014
CASHEREAGH 2014 EQUITY A&A 2014
CET EAST CAMPUS 2014 FABER GREEN 2014
CITY SCAPE AT FARRER PARK 2014 FORESQUE 2014
CLEANTECH 2014 GAN ENG SENG PRI SCH 2014
Cold Hub II 2014 Goodvine Building 2014
CONCOURSE SKYLINE 2014 GOODWOOD RESIDENCE 2014
CONNEXION FARRER PARK HOSPITAL 2014 GREENBANK PARK 2014
CREATIVE A&A 2014 HALLIBURTON 2014
CST 2014 HANA CONDO 2014
CYAN CONDO 2014 HEEREN 2014
LANCER AT JURONG ISL 2014 HOLIDAY INN EXPRESS 2014
LAS2 2014 HOTEL PHOENIX (Orchard Gateway) 2014
LAVENDER BIZ HUB 2014 HP @ Tuas Link 2014
LUCASFILM 2014 HP Building 2014
MAHABODHI MONASTERY P1 2014 International Financial Centre 2014
MARINA SOUTH MRT 2014 JEM 2014
METROPOLIS @ ONE- NORTH 2014 JERVOIS HILL 2014
MEYERISE 2014 JLN TUKANG MEDICAL HUB 2014
NATHAN SUITE 2014 Keong Saik Road 2014
Ng Teng Feng General Hospital @ Jurong East 2014 KEPPEL BAY VISTA 2014
NOUVEL 18 2014 RIVER PARC CONDO 2014
NTU Lee Kong Chian School of Medicine 2014 ROHDE & SCHWARZ 2014
NTUC 2014 SANDY ISLAND 2014
NUH 2014 SCALA CONDO 2014
OCEAN FINANCIAL CENTRE 2014 SCHENKERS Buidling @ Tampines 2014
OXLEY CONDO 2014 SELETAR AEROSPACE 2 2014
P & G- INNOVATION/ BUILDING/ S11111B/ SGIC 2014 SENTOSA SOUTH COVE 2014
PATTERSON 2 2014 Shaw Centre 2014
PORT OF BOTAN 2014 SIM CAMPUS 2014
PROMOS @ Sophia Road - A & A 2014 SINGAPORE LAND TOWER (SLT) LEVEL 45 2014
Singapore Polytechnic 2014 THE BLOSSOM 2014
SKY SUITE 2014 THE LAURELS 2014 SPECIALIST CENTRE 2014 THE VISION 2014 SportsHub Complex @ Kallang 2014 VICTORY THEATRE 2014 ST ELECTRONIC 2014 VIVO CITY - A & A 2014 Stamford American International School 2014 WATERFRONT ISLE 2014 SUNTEC 2014 WEST GATE @ JURONG EAST 2014 TELOK KURAU PRIMARY SCHOOL 2014 White Sands Primary School 2014 Temasek Primary School 2014 WOODLAND TERRACE 2014 BOTANIC STATION 2013 2M2P @ SCIENCE PARK 2013 BOULEVARD VUE 2013 ALTEZ 2013 C483/ C486 MRT 2013 AMK POINT 2013
BOTANIC STATION 2013 C908 DOWNTOWN LINE PHASE CROSS STREET
MRT 2013
BOULEVARD VUE 2013 CAPITAL SQUARE MALL 2013 C483/ C486 MRT 2013 CARLTON CITY PLAZA 2013 C903 BUGIS TUNNEL 2013 CAUSEWAY POINT 2013 C907 DOWNTOWN LINE 2013 CCRC 2013
CH
AP
TE
R 1
9:
Re
cen
t P
roje
ct I
nvo
lve
me
nt
39
CREATE @ NUS (U TOWN) 2013 CET WEST CAMPUS 2013 CUBE 8 @ BALESTIER ROAD 2013 CHANGI BUSINESS PARK 2013 DORSETT HOTEL 2013 CHINA SQUARE 2013 DUPONT 2013 CHINATOWN MRT 2013 FESTIVE HOTEL 2013 CHINATOWN POINT A & A 2013 FLORIDIAN CONDO 2013 CK TANG PLAZA 2013 FULLERTON- UNDERPASS 2013 CLEANTECH 2013 FUSION POLIS 3 2013 ClLOVER BY THE PARK @ BISHAN 2013 GLENEAGLE HOSPITAL 2013 CONNEXION 2013 HOTEL PLAZA @ UPPER PICKERING ST 2013 Marriot Hotel - A & A 2013 HUNDRED TREE 2013 MBFC RESIDENTIAL BLOCK 2013 IMM A & A 2013 MBFC TOWER 3 2013 INFINITE STUDIO @ MEDIAPOLIS 2013 MCE C483 CIRCLE LINE 2013 J CUBE 2013 MILLENIA TOWER 2013 JEM @ Jurong East 2013 NATIONAL HEART CENTR 2013 JUN TAIYO 2013 NIN RESIDENCE 2013 KLA TENCOR 2013 NUH-MED CTR 2013 KRANJI TURF CLUB 2013 OCBC BUILDING 2013 Marina Coastal Expressway C461 2013 OUB FACADE 2013 ST Electronic - A & A 2013 P&G INNOVATION 2013 THE LUXURIE 2013 PLAZA HOTEL @ UPPER PICKERING STREET 2013 THE MINTON 2013 QUAYSIDE RESIDENCE/ SHOPPING CENTRAL 2013 THOMSON REUTERS 2013 REFLECTION 2013 UTS CREVASSE 2013 Rivervale Plaza A&A 2013 Vivo City - A & A 2013 SENTOSA COVE 2013 WATER VIEW 2013 SENTOSA MC06 2013 WEST WOOD 2013 SGH PATHOLOGY 2013 WISHART ROAD 2013 Singapore Turf Club @ Kranji 2013 WYETH Plant - A & A 2013 SINGTEL BUILDING PHASE 2 2013 Audi Showroom A&A WORKS @ CAUSEWAY POINT Bell Helicopter and Cessna Service Facility 2012 ADMORE RESIDENCE 2012 CCRC - The Rock 2012 COMMERCIAL BUILDING @ TANJONG KLING 2012 CHANEL @ NAC 2012 CONTINENTIAL AUTO 2012 CHANGI T1 2012 CREATE @ NUS - A&A WORK PHASE I/II/III 2012 Home Team Academy A&A 2012 DOMUS CONDO 2012 Hougang Point - A&A 2012 Dorsett Residences & Hotel 2012 HYFLUX 2012 Garden By The Bay 2012 Illuma Shopping Centre - A&A 2012 HALLIBURTON 2012 Infinite Studio @ Mediapolis 2012 Harvests @ Woodlands Industrial Park E5 2012 ITE Central @ Ang Mo Kio 2012 Mi Casa Condominum 2012 J-Cube @ Jurong East 2012 MOM @ BENDEMEER 2012 KENG LEE ROAD 2012 NUS University Town - CREATE 2012 KIM LIN CONDO 2012 Ocean Financial Centre 2012 LYNWOOD GROVE 2012 ONE ROCHESTER @ BUONA VISTA 2012 Madison Residence 2012 OUBC BUILDING @ CBD 2012 MARINA BAY SAND (MBS) 2012 PARK ROYAL HOTEL @ UPPER PICKERING STREET 2012 MARITIME MUSUEM @ IR SENTOSA 2012 PSA Vista 2012 MBFC TOWER 1 2012 QUAYSIDE SHOPPING CENTRAL 2012 MDIS 2012 REC Plant - A&A 2012 THE INTEGRA TOWER 2012 REFLECTION 2012 THE MEZZO 2012 RESORT WORLD SENTOSA (RWS) 2012
CH
AP
TE
R 1
9:
Re
cen
t P
roje
ct I
nvo
lve
me
nt
40
THE WHARF RESIDENCE 2012 ROYAL THAI EMBASSY 2012 VENTTUS @ NUS 2012 SAFRA Toa Payoh 2012 VENTUS @ NUS 2012 SANDY ISLAND 2012 VIVA CONDO 2012 SINGAPORE EXPO 2012 Zhongsun Garden 2012 Singapore Pool 2012 UPPER PICKENING STREET 2012 SSMC - EXTENSION 2012 WOODLAND CC 2012 TEMASEK POLYTECHNIC 2012 THE CLIFT 2012 THE BAY HOTEL 2012 79 ANSON - RESEALANT 2011 11 STOREY HOTEL @ TELOK BLANGAH 2011 ASIA TOWER 1 2011 5 STY TAMPINES MALL ( TAMPINES ONE) 2011 BAY FRONT MRT STATION 2011 Far East Plaza A&A 2011 Causeway Point A&A 2011 GARDEN BY THE BAY 2011 Chij St. Theresa - Telok Blangah 2011 GEYLANG EAST CC 2011
CLAYMORE HILL 2011 GRAND PARK HOTEL (Crown Prince) @
ORCHARD 2011
Cliveden @ Grange (Kim Lin Mansion) 2011 HARK ROCK HOTEL 2011 CONCOURSE SKYLINE 2011 HITACHI HOUSE 2011 CREATE @ NUS (U TOWN) 2011 HOTEL MICHAEL 2011 EMERALD HILL CONDO 2011 IMFS 2011 Factory @ 60, Tuas Ave 11 2011 KASARA VILLA 2011 Factory Development @ Tuas Avenue 5 2011 KATONG MALL 2011 PARC CONDO 2011 LONZA PLANT 2 2011 PEARL ISLAND @ SENTOSA 2011 Luxe Ville Condominum 2011 PSA Building - 72 Sty A&A 2011 NEW TECH PARK 2011 Quayside Hotel 2011 NEX @ SERANGOON 2011 RICHMAND PARK CONDO 2011 NTT @ SERANGOON 2011 ROLLS ROYCE PLANT - ACCORD 2011 NTUC INCOME CENTRE 2011 SEASCAPE 2011 NUS, BLK S5: T-LAB 2011 Seletar Airport 2011 ONE SHENTON 2011 SHELFORD CONDO 2011 OUBC @ CBD 2011 SIM LIAN HQ 2011 OUH Building 2011 UBI ONE 2011 SOLEIL CONDO 2011 UNIVESAL STUDIO 2011 Store Hub 2011 WAK HASSAN DRIVE 19 2011 THE INTEGRA TOWER 2011 WOH HUP HQ 2011 TUAS POWER STATION - RESEALANT 2011 MBFC TOWER 2 & 3 - COMMERICAL 2010 NUS S16 & LT31 RESEALANT WORK 2010
MOON HOTEL @ LITTLE INDIA 2010 NATIONAL UNIVERSITY HOSPITAL : ADMIN
BUILDING 2010
MUSTAFA SHOPPING CENTRE A & A WORKS 2010 NGEE ANN POLYTECHNIC EXTENSION 2010 MY VILLAGE @ SERANGOON GARDEN 2010 ONE SHENTON @ SHENTON WAY 2010 DOMUS CONDOMINUM 2010 ION – ORCHARD TURN 2010 DUXTON PINNACLE 2010 OUH BUILDING @ CLIFFORD PIER 2010 DAWN VILLE @ BUTTERWORTH LANE 2010 PARK REGIS @ MERCHANT ROAD 2010 UNITED WORLD COLLEGE SEA @ TAMPINES 2010 GRAND PARK HOTEL @ ORCHARD 2010 EQUITY PLAZA RESEALANT WORK 2010 PARK VIEW CONDOMINUM 2010 SINGAPORE GENERAL HOSPITAL A & A WORKS 2010 PIL BUILDING A & A WORKS 2010 JURONG POINT 2010 24 NEWTON CONDOMINUM 2010 IBM BUILDING A & A WORKS 2010 RAFFLES CITY A & A WORKS [PHASE II] 2010 ICON @ INTERNATIONAL BUSINESS PARK 2010 RAFFLES COUNTRY CLUB A & A WORKS 2010
CH
AP
TE
R 1
9:
Re
cen
t P
roje
ct I
nvo
lve
me
nt
41
JACKSON SQUARE @ TOA PAYOH 2010 RASA SENTOSA A & A WORKS 2010 LUMOS @LEONIE HILL 2010 NEX – SERANGOON HUB 2010 MBFC TOWER 1 2010 SEA VIEW CONDOMINUM 2010 MARINA COLLECTION @ SENTOSA 2010 SHOWA DENKO PLANT A & A WORKS 2010 ASIA SQUARE TOWER 1 2010 SOLEIL CONDOMINUM 2010 BALMEG HILL 2010 SKY ELEVEN @ TOA PAYOH 2010 BIOFARMA, INDONESIA 2010 SKY PARK @ MARINA BAY SANDS 2010 CATERPILLAR PLANT 2010 ST. THOMAS CONDOMINUM 2010 CHANCELLOR HOTEL 2010 STORE HUB @ TAMPINES 2010 CHOA CHU KANG POLYCLINIC 2010 SUPREME COURT A & A WORKS 2010 DOWNTOWN LINE MRT STATION - BAYFRONT 2010 TOKIO MARINE BUILDING 2010 BELLERIVE @ BUKIT TIMAH 2010 KENDALL @SCIENCE PARK II 2010 CIRCLE LINE MRT STATION - BOTANIC 2010 TEMASEK POLYTECHNIC A & A WORKS 2010 CIRCLE LINE MRT STATION – LORONG CHUAN 2010 THE CLIFT 2010 CITY SQUARE MALL 2010 THE ARTE 2010 CLEMENTI MARKET 2010 THE AMERY @TELOK KURAU 2010 CLIVEDEN @ GRANGE ROAD 2010 THE MARQ @ PATERSON HILL 2010 CLOVER BY THE BAY @ BISHAN 2010 TREASURE RESORT HOTEL @ SENTOSA 2010 AALTO @ MEYER ROAD 2010 TURQUOISE CONDOMINUM @ SENTOSA 2010 ALCON @ TUAS SOUTH 2010 INFINITY @ WEST COAST 2009 DAKOTA RESIDENCES 2010 INSPIRA CONDO 2009 GE / KEPPEL TOWER RESEALANT WORK 2010 ILLUMOS 2009
HEEREN SHOPPING CENTRE A&A 2010 LUMIER CONDOMINUM @ MISTRI ROAD 2009
TAN TOCK SENG HOSPITAL A & A 2010 JOO KOON / PIONEER MRT STATION 2009
LIVIACONDOMINUM @ PASIR RIS 2010 KHOO PECK PHUAT HOSPITAL 2009
3M PLANT @ TUAS 2009 LONZA @ TUAS 2009
UOB @ TAMPINES A & A Works 2009 LOKE YEW PROJECT 2009
WATERLOO @ AUSTRALIA 2009 MABATTAN 2009
WATERMARK 2009 MAPLETREE ANSON 2009
WCEGA 2009 MACQUARIE LIBRARY [OVERSEAS PROJECT] 2009
WEST COAST PLAZA 2009 NASSIM HILL CONDOMINUM 2009
WYETH 2009 NATURAL COOL INVESTMENTS @ TAI SENG 2009
YOUTH SCAPE @ CINELEISURE 2009 NEWTON 18 2009
TAMPINES ONE 2009 NUS MD2 2009
CENTENNIAL TOWER A&A 2009 NORTH STAR @ AMK 2009
PARADIZE CENTRE A&A 2009 NTUC BUILDING @ BRAS BESAR 2009
PARAGON SHOPPING CENTRE A&A 2009 OASIS GARDEN 2009
ANGLO CHINESE SCHOOL @ BARKER ROAD 2009 OCEANFRONT CONDOMINIUM 2009
ALLIED MATERIAL 2009 ONE EAST MELBOURNE @ AUSTRALIA 2009
ARDMORE PARK 2 2009 ORCHARD CENTRAL 2009
ATP7 @ AUSTRALIA 2009 313 SOMERSET 2009
BISHAN MRT C853A 2009 PARK HOTEL @ UNILITY ROAD 2009
BUNGALOW @ KINTA ROAD 2009 PICO Art Centre @ KALLANG 2009
CAIRHILL CONDO 2009 PIONEER/JOO KOON MRT 2009
CITY BANK @ CHANGI SOUTH 2009 PIL BUILDING 2009
CITY SQUARE MALL 2009 PSA OFFICE BLOCK 2009
CINTECH IV 2009 PSA VISTA 2009
CIRCLE LINE (C852/C953) 2009 REC MANUFACTURING PLANT @ TUAS 2009
CLARENCE STREET @ AUSTRALIA 2009 RIVERRINE CONDO 2009
CLEMENTI COMMERCIAL BUILDING 2009 SEAFRONT CONDOMINIUM 2009
CH
AP
TE
R 1
9:
Re
cen
t P
roje
ct I
nvo
lve
me
nt
42
CROWNE PLAZA HOTEL @ T3 (REPAIR & REDECORATION) 2009 SEMBAWANG SHOPPING CENTRE 2009
DEVOSHIRE CONDOMINIUM 2009 SOHO @ SELEGIE 2009
DUKE @ NUS 2009 STRAITS TRADING BUILDING 2009
ELIAS ROAD @ PASIR RIS 2009 HIGH STREET P03062 2009
EPPING @AUSTRALIA 2009 INFINITY @ WEST COAST 2009
FERNHILL CONDOMINIUM 2009 INSPIRA CONDO 2009
YOUTH SCAPE @ CINELEISURE 2009 TAMPINES GRANDE 2009
TOWER 15 2009 THE CENTRIS @ JURONG POINT 2009
GINZA PLAZA A & A (WEST COAST PLAZA) 2009 BOTANICA @ HOLLAND ROAD 2008
GLAXOSMITHKLINE PLANT 2009 SINGAPORE GENERAL HOSPITAL - A & A BLK 7 2008
THE MAHAPJARNA BUDDHIST SOCIETY 2009 ABBOTT NUITRITION MANUFACTURING PLANT 2008
HARD ROCK HOTEL @ SENTOSA 2009 AIB APARTMENT 2008
THE COAST 2009 ROXY SQUARE 2008
ANG MO KIO HUB 2008 ROYAL PLAZA 2008
BISHAN MRT C854A 2008 SAF MUSEUM @ DISCOVERY CENTRE 2008
BISHOPGATE 2008 SEAGATE TECHNOLOGY 2008
BMW SHOWROOM @ LENG KEE RD 2008 SEAVIEW CONDOMINIUM 2008
BOON LAY MRT 2008 ST ANNA CHURCH 2008
TEMASEK TOWER 2008 ST REGIS CONDOMINIUM 2008
BOULEVARD CIRCLE LINE 2008 SUNLIGHT TIMBER WAREHOUSE 2008
BUGIS JUNCTION RESEALANT WORKS 2008 TAN SON NHAT AIRPORT @ VIETNAM 2008
CAIRNHILL CREST CONDOMINIUM 2008 THE ESTA 2008
CAROL ISLAND CONDO @ SENTOSA COVE 2008 THE ORION 2008
CALROSE GARDEN 2008 THE SAIL 2008
CHANGI T3 AIRSIDE PARKING BAY 2008 TRINITY CHURCH ( TCC PROJECT ) 2008
CHARLES & KEITH @ TAI SENG 2008 UOL BUILDING 2008
LOT 1 SHOPPING CENTRE @ CHOA CHU KANG 2008 1 DEGREE 15 CLUB @ SENTOSA 2007
CITY SQUARE CONDOMINIUM 2008 SCIENCE CENTRE A&A 2007
COSMOPOLITAN 2008 AMARA SENTOSA HOTEL 2007
DARUL ISHAN PROJECT 2008 CHANGI T3 ROOFING 2007
DOWNTOWN EAST SHOPFRONTS 2008 CHINA EMBASSY 2007
F1 BUILDING 2008 CHUAN COURT 2007
FUSIONOPOLIS PHASE 1 2008 DOMAIN 21 2007
GENETECH @ TUAS 2008 EDWARD LIFE SCIENCE 2007
HARBOURFRONT (6 STOREY OFFICE) 2008 GOLDIN 2007
HAYER @ SOON LEE 2008 GOMBAK CAMP 2007
IMFS 2008 HANDY CONDOMINIUM 2007
KALLANG THEATRE MRT 2008 HIGH STREET CENTRE 2007
LORONG CHUAN MRT C852A 2008 HORTICULTURE CENTRE 2007
MARINA BARRAGE 2008 IMM A & A 2007
MARVELL HQ @ TAI SENG 2008 KALLANG LEISURE DROME 2007
NEW PARK HOTEL A&A 2008 KALLANG TREATRE MRT (C828) 2007
NGEE ANN CITY 2008 LA SALLE ART SCHOOL 2007
NORTH POINT @ YISHUN 2008 LAKESHORE CONDOMINIUM 2007
NTU -TEACHING 2008 ROYAL PLAZA @ SCOTTS ROAD 2007
NUS ALUMNI 2008 SOHO - CENTRAL 2007
ONE TREE HILL 2008 SOITECH WAFER PLANT 2007
ORCHARD PLAZA 2008 ST ANNA CHURCH 2007
ORCHARD SCOTTS (RESEALANTS WORK) 2008 TELEPARK 2007
SEAGATE TECHNOLOGY 2008 THE ICON 2007
NUS ALUMNI 2008 THE LAKESHORE 2007
ONE TREE HILL 2008 VELOCITY 2007
CH
AP
TE
R 1
9:
Re
cen
t P
roje
ct I
nvo
lve
me
nt
43
ORCHARD PLAZA 2008 CLARK QUAY 2006
ORCHARD SCOTTS (RESEALANTS WORK) 2008 SHOWA DENKO 2006
PARK INFINIA 2008 CHANGI AIRPORT TERMINAL 2 2005
PALAIS RENAISSANCE @ ORCHARD ROAD 2008 UNITED SQUARE 2002
PINNACLE 1 @ AUSTRALIA 2008 PLAZA SINGAPURA 2002
CHINATOWN POINT – RESEALANT WORK 2008 RAFFLES CITY, WESTIN HOTEL 1985
RICHLAND @ BEDOK 2008 TEMASEK BUILDING (TREASURY BUILDING) 1985
* Above list only reflects partial of our project references. For detail project references, please contact our sales representatives to further assist you.
18, Fan Yoong Road, Singapore 629 795 Tel: (65) 6267 1300 Fax: (65) 6264 2960
Your Trusted Partner in Material Supply for Construction, Façade, RHVAC & Solar Industry.
Sealant Range
Foam Tapes / Backer Rods
Glass / Metal Protection Film & Coating
Setting Block for Glass
Specialty Coating