Post on 08-Apr-2018
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 1/116
Installation
Guide
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 2/116
COPYRIGHT
SDL TRADOS 2007 INSTALLATION GUIDE
SDL TRADOS 2007 SUITE
INSTALLATION GUIDE
Copyright© 2008, SDL plc.
All rights reserved. No part of this documentationmay be duplicated in whole or in part or reproducedor transmitted in any form or by any means withoutthe express written permission of SDL plc.
SDL Trados Synergy, SDL Trados 2007, SDLMultiTerm, SDL Passolo and SDL PerfectMatch aretrademarks of SDL plc.
All third-party trademarks are the property of theirrespective owners. The names of other companiesand products mentioned herein may be thetrademarks of their respective owners. Unlessstated to the contrary, no association with any other
company or product is intended or should beinferred.
Although SDL takes all reasonable measures toprovide accurate and comprehensive informationabout the product, this guide is provided “as is”without warranty, either express or implied.
This guide ships with SDL Trados 2007 Suite.
October 2008
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 3/116
SDL TRADOS 2007 INSTALLATION GUIDE
Chapter 1 Installation Overview
About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Introducing SDL Trados 2007 Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
System Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3The Client Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3The Middleware Server Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4The Database Server Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Language Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Overview of Installing SDL Trados Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Installation Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Upgrade and Compatibility Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Upgrading from SDL Trados 2006 and SDL Trados 7.x . . . . . . . . . . . 1-6Translation Memory Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6Installing Different Versions of SDL Trados on the Same Computer 1-7TRADOS Edition 2.x, 3.x, 5.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8Migrating from a Dongle to a License File . . . . . . . . . . . . . . . . . . . . . 1-8
MultiTerm Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8Registering the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Chapter 2 Licensing SDL Trados 2007
Licensing SDL Trados 2007 Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Product Activation Code – The Default Licensing Method . . . . . . . . 2-2Floating Softkey License File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4Node Locked Softkey License File . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Downloading SDL Trados 2007 License Files and Product Activation Codes . . 2-5
About Activating SDL Trados 2007 Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
The Product Activation Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9SDL License Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
TABLE OF CONTENTS
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 4/1162SDL TRADOS 2007 INSTALLATION GUIDE
Activating your Product using the SDL Product Activation Wizard . . . . . . . . . . . 2-13
Activating your Product using SDL License Manager . . . . . . . . . . . . . . . . . . . . . 2-18
Activating your Product Online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18Activating your Product using Floating Licenses . . . . . . . . . . . . . . . . 2-21Activating your Product using a Personal Softkey License File . . . . . 2-24
Managing Licenses for Products Activated Online . . . . . . . . . . . . . . . . . . . . . . . 2-26
Viewing Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26Returning a License or Licensing your Product on a DifferentComputer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28Repairing a License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29
Managing Floating License Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30
Borrowing a Floating License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30Returning a Borrowed License Early . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32
Changing your Floating License Server . . . . . . . . . . . . . . . . . . . . . . . . 2-33
Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36
Chapter 3 Installing SDL Trados 2007 Suite Professional
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2Companion Software Required by SDL Trados 2007 Suite -Professional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3Language Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3Upgrading from an Earlier Version of SDL Trados . . . . . . . . . . . . . . . 3-3
About the SDL Trados 2007 Suite Professional Installer . . . . . . . . . . . . . . . . . . . 3-4
SDL Trados 2007 Suite - Professional Components . . . . . . . . . . . . . 3-4Other Software Installed with SDL Trados 2007 Suite . . . . . . . . . . . . 3-5Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Installing SDL Trados 2007 Suite -Professional . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7Installing SDL Trados 2007 Suite - Professional . . . . . . . . . . . . . . . . 3-7Licensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
Other Installation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Administrative Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27Logging an Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28Silent Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-28
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 5/116
SDL TRADOS 2007 INSTALLATION GUIDE
Maintaining your Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Modifying your Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29Repairing your Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31Removing SDL Trados 2007 Applications . . . . . . . . . . . . . . . . . . . . . . 3-31Access Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33
What’s Next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33
Chapter 4 Installing SDL Trados 2007 Suite Freelance
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2Companion Software Required by SDL Trados 2007 Suite -Freelance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2Language Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Upgrading from an Earlier Version of SDL Trados . . . . . . . . . . . . . . . 4-3SDL Trados 2007 Suite - Freelance Product Restrictions . . . . . . . . . . 4-4
About the SDL Trados 2007 Suite - Freelance Installer . . . . . . . . . . . . . . . . . . . . 4-5
SDL Trados 2007 Suite Suite - Freelance Components . . . . . . . . . . . 4-5Other Software Installed with SDL Trados 2007 Suite . . . . . . . . . . . . 4-6Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Installing SDL Trados 2007 Suite - Freelance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Maintaining your SDL Trados 2007 Suite Freelance Installation . . . . . . . . . . . . 4-29
Modifying your Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29Repairing your Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31Removing SDL Trados 2007 Freelance . . . . . . . . . . . . . . . . . . . . . . . . 4-31Access Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32
What’s Next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 6/1164SDL TRADOS 2007 INSTALLATION GUIDE
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 7/116
Chapt
INSTALLATION OVERVIEW
This chapter gives you an overview of the SDL Trados 2007
Suite installation procedure and an overview of the SDL Trados
2007 Suite system. Sections include:
C About this Guide
C Introducing SDL Trados 2007 Suite
C Overview of Installing SDL Trados Products
C Installation Media
C Upgrade and Compatibility Information
1
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 8/116
About th i s G ui de1
1-2SDL TRADOS 2007 INSTALLATION GUIDE
ABOUT THIS GUIDE
This guide describes how to install and license:
C SDL Trados 2007 Suite - Professional
C SDL Trados 2007 Suite - Freelance
Using SDL Trados 2007 Suite tools is described in the product help and documentation. SDL Trados
guides and tutorials are placed in the following location during product installation:
C:\Program Files\SDL International\SDL Trados 2007[_FL}\Documentation
C:\Program Files\SDL International\SDL Trados 2007[_FL}\Tutorials
C:\Program Files\SDL Passolo 2007\Manuals
INTRODUCING SDL TRADOS 2007 SUITE
SDL Trados 2007 Suite is a suite of products that work together to enable translation teams to share
translation tools, resources and project files. Resources such as translation memories and project
tracking tools can be shared over an intranet or over the Internet.
SDL Trados 2007 Suite contains the following two products:
C SDL Trados 2007
C SDL Passolo Essential including all main functions needed for the localization of software
This guide mainly contains information on SDL Trados 2007. For more information on SDL Passolo
Essential and its restrictions compared to the Professional and Team Editions, refer to the SDL
Passolo Getting Started Guide and SDL Passolo Handbook included with SDL Passolo Essential.
You can access this documentation from the Start view in SDL Trados Synergy or through the
Windows Start menu under All Programs > SDL Passolo > Manuals.
SDL Trados 2007 Suite can also be a single-user tool where the SDL Trados 2007 Suite software and
translation memories are located on your computer and there is no interaction with translationmemories or projects over an intranet or the Internet.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 9/116
In t roduc i n g SDL Trados 2007 Su i t e1
SDL TRADOS 2007 INSTALLATION GUIDE
1-
System Architecture
In a multi-user setup SDL Trados 2007 Suite has a three layer architecture as this diagram shows.
In a single-user setup all resources are located on the user’s computer.
The Client Layer
Clients include: Synergy, Translator’s Workbench, TagEditor, SDL Passolo and Server Manager.
Synergy, Translator’s Workbench, TagEditor and SDL Passolo Essential are packaged together as
SDL Trados 2007 Suite Professional and SDL Trados 2007 Suite Freelance.
C SDL Trados Server Manager is the client used by system administrators to manage server-
based-translation memories and user access rights to translation memories.
C Synergy is the SDL Trados 2007 Suite project management tool where projects are created and
distributed and project team members open and translate project packages.
C Translator’s Workbench is where translation memory administration is performed.
C TagEditor is where tagged files are translated. The special editing environment ensures that
information in tags is not lost during translation.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 10/116
In t roduc i n g SDL Trados 2007 Su i t e1
1-4SDL TRADOS 2007 INSTALLATION GUIDE
C SDL Passolo Essential is a localization tool for text resource translation and software
localization. Text resources are the text components of a software that are displayed on the
screen.
C SDL Trados Server Manager is the administration client for server-side components of SDL
Trados 2007 Suite.
In a setup that includes server components, clients communicate with SDL Trados 2007 Suite
Server components through the intranet (through a LAN or WAN) or through the Internet using TM
Anywhere Server. Clients communicate with database servers through middleware components.
NOTED
SDL Trados Server Manager communicates with SDL Trados 2007 Suite Server through theintranet only.
The Middleware Server Layer
Contains the servers that enable SDL Trados 2007 Suite users to access server-based translation
memories and project tracking on the project tracking server. This layer also handles all
communication with the databases holding translation memories.
The Database Server Layer
The database server layer is the data storage layer for SDL Trados 2007 Suite. It contains thedatabases where translation memories and user credentials are stored. One or more database servers
can be used. Clients cannot access databases directly, all access is through servers in the Middleware
layer.
Language Support
In general, language support in the SDL Trados translation memory suite corresponds to the
language support installed on your system. For more information about specific support for
bi-directional and double-byte character set (DBCS) languages in Translator’s Workbench, and
TagEditor, see the relevant online help system and the product release notes. Additional information
is available from the SDL online support center at http://support.sdl.com.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 11/116
Overv i ew o f In s ta l l i n g SDL Trados Produc ts1
SDL TRADOS 2007 INSTALLATION GUIDE
1-
OVERVIEW OF INSTALLING SDL TRADOS PRODUCTS
The installation programs for both SDL Trados Freelance and Professional follow the same pattern:
At the end of the installation process you have the opportunity to activate the SDL Trados 2007 Suite
product by licensing the software for the machine where it has been installed. See “About Activating
SDL Trados 2007 Products” on page 2-9 for more information.
If you are using the software in trial mode, you have thirty days in which you can use it without
purchasing a valid license. After 30 days, if you have not purchased a valid license the software will
either cease to function or will function in a severely limited form known as demo mode.
For more information about product licensing, see Chapter 2 Licensing SDL Trados 2007 .
Step 1 On the machine where SDL Trados is being installed, the installer
program checks for the presence of prerequisite software. This is
software that must be in place for SDL Trados to function
correctly. For example, SDL Trados requires the .NET
Framework 2 to be present. If pre-requisite software is not found
on your machine, it is installed with SDL Trados.
Step 2 You are presented with a list of the items that will be installed.
The list may include missing software prerequisites as well as
SDL Trados software. At this point it is possible to remove items
from the list. However, this is not recommended as SDL Tradoswill not function correctly if you do this.
Step 3 The listed software items are installed. Prerequisite software is
installed before SDL Trados. Each item of prerequisite software
may have its own installation screens and licensing agreement
which are displayed in the SDL Trados 2007 Suite installer.
Step 4 You can choose to perform a default or custom installation of the
SDL Trados 2007 Suite software. In a custom installation you can
choose not to install all SDL Trados 2007 Suite components, or to
install SDL Trados 2007 Suite to a non-default location.
Step 5 SDL Trados components are installed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 12/116
In s ta l l a t i on Medi a1
1-6SDL TRADOS 2007 INSTALLATION GUIDE
INSTALLATION MEDIA
When you purchase SDL software you can either order a product CD or download the software from
the Internet.
C If you purchased a CD, install SDL Trados 2007 Suite directly from the product CD.
C If you are installing the software from a network resource, ask your system administrator for
the network location of the SDL Trados 2007 Suite installer setup program.
C If you downloaded the software, go to the location where you stored the downloaded files and
run the installer from there.
UPGRADE AND COMPATIBILITY INFORMATION
This section contains important information if you are upgrading from an earlier version of the
software. It also discusses how different versions can co-exist during the transition period of
upgrading.
We strongly recommend that you finish translating files that were initially processed in earlier
versions before upgrading to SDL Trados 2007 Suite.
Upgrading from SDL Trados 2006 and SDL Trados 7.x
SDL Trados 2007 Suite supports side-by-side installation with SDL Trados 2006 and 7.x. However,
SDLX 2007 cannot be installed side-by-side with SDLX 2006. Running the SDL Trados 2007
installer upgrades SDLX 2006 to SDLX 2007.
Translation Memory Compatibility
Translation memories created in SDL Trados 2007 Suite have the database version number 7.x.
Translation memories created in TRADOS 7.x and earlier can be opened by and used in version 8.xof Translator's Workbench. However, in order to benefit from the Unicode-related enhancements,
it is necessary to export the 6.5 or earlier translation memories in version 6.x or earlier and then
import them into newly created translation memories.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 13/116
Upgrade an d Compat i b i l i t y In fo rmat i on1
SDL TRADOS 2007 INSTALLATION GUIDE
1-
Translation memories created in versions 7.x/8.x of Translator’s Workbench cannot be opened in
earlier versions of Translator's Workbench (version 6.5 and earlier). This is due to the support for
new languages and the ability to store Unicode content in any language in translation memory
metadata fields, such as text and attribute fields. However, translation memories can be exchanged
between version 7.x and 8.x of Translator’s Workbench without any problems, as translationmemories in these versions share the same database format. This applies to both file and server-
based translation memories.
Importing 7.x/8.x-produced export files into a 6.x installation may result in corrupt TM data (fields,
as well as segments), if Unicode characters are present in the 7.x/8.x TM that is exported into 6.x
format.
By default, export files of Translator’s Workbench translation memories are now encoded in
Unicode (UTF-8) in order to support the new languages and other Unicode content in translation
memories. These export files can only be imported into version 7.x/8.x translation memories and
cannot be exchanged with users of older versions. A backward-compatible export format is still
available for use with older versions; however this file format does not support any of the new
Unicode-related enhancements.
Installing Different Versions of SDL Trados on the Same Computer
During the upgrade period, you may want to have different versions of the SDL Trados translation
solution co-exist on your computer. In this situation, we recommend the following:
In general, you can install SDL Trados 2007 Suite on the same computer as the previous versions(version 7.5 or earlier), provided that each version is installed to a separate folder. The default
installation location for each version of the software is different.
Do not use different versions of the software at the same time. For example, close Translator's
Workbench 7.x before registering and opening Translator's Workbench 8.x.
Do not run different versions of the same component at the same time. If you are using several tools
at once, do not work with mixed versions of the software. For example, if you are translating files in
TagEditor, use TagEditor 8.x with Translator's Workbench 8.x. Do not use TagEditor 8.x with
Translator's Workbench 7.5 and vice versa.
We recommend that you use the same version of the software to translate files from start to finish.
Migrating files from an earlier to a later version of the software when the project has already started
may result in data inconsistencies.
When alternating between two different versions, you must register the software you are about to
use by executing a special self-registration batch file. The batch file for each version is accessed from
the Start menu on your computer.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 14/116
Upgrade an d Compat i b i l i t y In fo rmat i on1
1-8SDL TRADOS 2007 INSTALLATION GUIDE
TRADOS Edition 2.x, 3.x, 5.x
Limited compatibility may apply between SDL Trados 2007 Suite and editions 2.x/3.x/5.x of the
TRADOS translation solution. Limited compatibility between translation memories created in
Edition 2.x/3.x and Translator’s Workbench 5.x and 6.x may also apply. Contact SDL beforemigrating Edition 2.x/3.x/5.x memories to Translator’s Workbench 7.x/8.x.
Migrating from a Dongle to a License File
If you are upgrading from an earlier version of Trados software which used a dongle you cannot use
your old dongle with the later version of the software. Please contact customer support for additional
information on upgrading your license.
MultiTerm Compatibility
SDL Trados 2007 Suite is compatible with the following SDL MultiTerm versions: MultiTerm 2007
(version 7.5) and previous 7.x releases, MultiTerm iX (version 6.x) and MultiTerm 5.5. SDLX 2007
is compatible with SDL MultiTerm 2007 and 7.x only. To avail of the new terminology features such
as active terminology recognition across several terminology databases and quick term entry from
Translator's Workbench and TagEditor, you must use MultiTerm 2007 or 7.x Desktop. For optimum
performance, we recommend using MultiTerm 2007 (version 7.5) in conjunction with SDL Trados
2007 Suite.
Registering the Software
When alternating between two different versions, you must register the software you are about to
use by executing a special self-registration batch file. The batch file for each version is accessed from
the Start menu on your computer after installation.
C To register version 8.x of the software, go to the Start menu on your computer and point to the
program folder for SDL Trados 2007 Suite. In the program folder, select Register SDL Trados
2007 to execute the batch file for the version 8.x software.
Once the you have run the batch file successfully, the software is ready for use.
NOTED
If you install SDL Trados 2007 Suite on Windows Vista with an Administrator Account but UAC(User Account Control) activated, the SelfRegister.bat does not work by default due to increasedsecurity on Windows Vista. To run the registration bat files, you must Right-click the batch fileand select Run as administrator. You will be asked for your permission to run the script withelevated permissions.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 15/116
Chapt
LICENSING SDL TRADOS 2007
This chapter describes how SDL Trados 2007 licenses are
managed. Topics include:
C Licensing SDL Trados 2007 Products
C Downloading SDL Trados 2007 License Files and
Product Activation Codes
C About Activating SDL Trados 2007 Products
C Managing Licenses for Products Activated Online
C Managing Floating License Files
C Demo Mode
2
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 16/116
L i cen s i n g SDL Trados 2007 Produc ts2
2-2SDL TRADOS 2007 INSTALLATION GUIDE
LICENSING SDL TRADOS 2007 PRODUCTS
When you purchase and download your SDL Trados 2007 software from the Internet, you download
your product license at the same time. SDL Trados 2007 products use the following license types:
C Product Activation Code
C Softkey license file - Floating
C Softkey license file - Node Locked.
Each type is described in detail below.
Product Activation Code – The Default Licensing Method
This type of license is used for SDL Trados 2007 Freelance and SDL Trados 2007 Professional. The
license takes the form of an activation code downloaded from the SDL licensing website when you
purchase the software. Once the software is installed on your computer you must activate the product
by licensing the product on that computer. You do this by connecting to the SDL licensing website
from the computer and activating the product using the code. This is referred to as ‘online
activation’.
You connect to the SDL licensing website using the SDL Product Activation wizard. The wizard is
displayed automatically at the end of product installation. Until you have activated the product
online, the wizard will also appear every time you start the software.
Once you have activated the product online, the license is valid for the machine from which you
performed the activation and no further action is required. If you have to move the software to a
different computer you must return the license and then activate the product online from the new
computer, using the same activation code. Licenses are returned using SDL License Manager.
NOTED
C Floating licenses can also be used with SDL Trados 2007 Professional.
C SDL Trados Freelance users can use the same activation code to activate the same product
on two computers as long as the computers are not on the same network.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 17/116
L i cen s i n g SDL Trados 2007 Produc ts2
SDL TRADOS 2007 INSTALLATION GUIDE
2-
SDL License Manager
SDL License Manager is installed on your computer as part of SDL Trados 2007. You use the SDL
License Manager to:
C View your current licenses.
C Return a license (because you are moving the software to a different machine).
C Connect to the SDL licensing website and activate a product online.
NOTED
If you cannot return a license because the machine where you activated the product has crashedand cannot be restarted, you must contact product support.
30 Day Trial Users
By special arrangement you can download the software without purchasing a license and use the
software free of charge for 30 days. After 30 days, if you have not purchased a valid license and
activated the product online, the software will either cease to function or it will switch to demo mode.
To find out more about demo mode restrictions, go to page 2-36.
Each time you open the product the SDL Product Activation wizard is displayed. When you decide to
purchase a license, you can do it from here.
Group Activation Code for SDL Trados 2007 Professional Users
Your organization may have a single online activation code to be used by all users. Each user who
installs the software activates the product online using the same activation code. The number of
times the code can be used is limited to the number of licenses that were purchased.
NOTED
Shared activation codes behave in exactly the same way as individual codes. For example, thecode may be returned from one computer and then activated on a different computer.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 18/116
L i cen s i n g SDL Trados 2007 Produc ts2
2-4SDL TRADOS 2007 INSTALLATION GUIDE
Floating Softkey License File
In this scenario the number of licenses purchased is smaller than the number of users who have
installed the software. When a user opens the software, they are automatically allocated one of the
available licenses. When they close the software, the license they were using is immediately madeavailable to other users.
Floating licenses are managed by FLEXlm License Server. It automatically allocates the correct
license to a user when they open the SDL Trados 2007 software and takes the license back again
when the user closes the application. Users connect to the License Server through the local network.
Floating licenses are issued as a single (*.lic ) license file which is stored on the server computer
where FLEXlm License Server is installed. Users have to set up their personal computer to access the
server where the floating licenses are being managed. They do this using SDL License Manager. See
“Managing Floating License Files” on page 30. for more information.
SDL Trados 2007 server tools use floating licenses.
NOTED
If you open an application and no floating license is available, the application will operate indemo mode. To find out more about demo mode restrictions, go to page 2-36.
Node Locked Softkey License File
A node locked softkey license takes the form of a license (*.lic ) file and licenses the use of one SDLTrados 2007 application on one computer.
In special circumstances, by prior agreement with SDL, a node locked softkey license may also be
given to a user instead of an online activation code.
For server applications, node locked softkey license files are downloaded from the SDL licensing
website and placed on the server computer where FLEXlm License Server is to be installed (or is
already installed). Server application licenses are managed by FLEXlm License Server. FLEXlm
License Server is managed and maintained by your administrator.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 19/116
Down load i n g SDL Trados 2007 L i cen se F i l es an d Produc t Ac t i va t i on Codes2
SDL TRADOS 2007 INSTALLATION GUIDE
2-
DOWNLOADING SDL TRADOS 2007 LICENSE FILESAND PRODUCT ACTIVATION CODES
SDL Trados 2007 product activation codes and license files are generated in and downloaded from
the My Licenses page at the following address: http://oos.sdl.com/myaccount. This is the web address
of SDL’s Customer Center.
C Product activation codes are copied to the clipboard of your computer and then used to activate
your product.
C Personal license files (*.lic ) are downloaded to your computer where they are managed using
SDL License Manager.
C License files for server tools and floating licenses are downloaded to the computer where
FLEXlm License Server is to be installed. We recommend that you download the license before
installing FLEXlm as you will be asked for the license file location during the FLEXlm
installation process.
NOTED
If you do not have the license file when you install FLEXlm License Server, you can installFLEXlm and add the license location later. However, this is a more involved process thatrequires you to stop and restart the FLEXlm License Server service.
When you purchase SDL Trados 2007 software, you are sent an email listing the items that you have
purchased. This email also contains the URL for the SDL product licensing website. Your login
details for the licensing website are sent to you in a separate email when your account is created onthe licensing website.
When you later purchase additional licenses or an upgrade, the email confirming your purchase will
not contain the URL.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 20/116
Down load i n g SDL Trados 2007 L i cen se F i l es an d Produc t Ac t i va t i on Codes2
2-6SDL TRADOS 2007 INSTALLATION GUIDE
Downloading an SDL Trados 2007 License File
1 Click the URL in the email you received from SDL, or enter the licensing website URL
http://oos.sdl.com/myaccount into your browser. The website opens on the Login page.
2 Enter your user name and password and click Login. If you have more than one
account the Account Selection page is displayed. Click a Use this account button to
display the Account Summary page for the selected account.
If you have a single account, the Account Summary page is displayed.
Click to go to the My Licenses page
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 21/116
Down load i n g SDL Trados 2007 L i cen se F i l es an d Produc t Ac t i va t i on Codes2
SDL TRADOS 2007 INSTALLATION GUIDE
2-
3 Click the My License link to display the My Licenses page.
4 Locate the product for which you want to generate the license.
5 Click the Generate License File link to display the Generate License File page. This is
where you generate the license file and download it to your computer or to the server
where FLEXlm will be installed. Make a note of where you place the license file.
This license is available to be
generated and downloaded
This license has been generated and downloaded.
The Download license file link remains active in case you need
to download the license to the same machine again.
To download the license to a different machine you would have
to return the license, regenerate the license for the new machine
and then download the regenerated license.
These are product activation codes. Select (highglight) the code you
require and right-click and opt to copy it to the clipboard of your
computer. You can paste it directly from the clipboard into the SDLProduct Activation wizard.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 22/116
Down load i n g SDL Trados 2007 L i cen se F i l es an d Produc t Ac t i va t i on Codes2
2-8SDL TRADOS 2007 INSTALLATION GUIDE
6 Repeat step 3 for any other licenses that are ready for downloading.
NOTED
Directions on how to generate and download license files are available on the licensing website.
Once you have successfully generated and saved your license file, you can activate your product. See
“About Activating SDL Trados 2007 Products” on page 9..
Downloading a Product Activation Code
1 Click the URL in the email you received from SDL, or enter the licensing website URL
http://oos.sdl.com/myaccount into your browser. The website opens on the Login page.
2 Enter your user name and password and click Login.
C If you have more than one account the Account Selection page is displayed. Click a Usethis account button to display the Account Summary page for the selected account
3 Click the My License link to display the My Licenses page.
4 Under the section headed, My Product Activation Codes, locate the code to be
downloaded.
5 Select the code and right-click.
6 Select Copy. The selected code is copied to your computer’s clipboard.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 23/116
About Ac t i va t i n g SDL Trados 2007 Produc ts2
SDL TRADOS 2007 INSTALLATION GUIDE
2-
ABOUT ACTIVATING SDL TRADOS 2007 PRODUCTS
When you install an SDL Trados 2007 product, the product is not valid for use until it has been
activated. Activation means that the product has been licensed for use on the machine where it is
installed. The type of activation you perform is determined by the type of license you purchased:
C If you have an activation code, you perform online activation.
C If you are using floating licenses, you activate your product by setting up your computer to
connect to the server computer where floating licenses are stored.
C If you have a personal node locked softkey license, you activate your product by linking the
software to the downloaded license file.
Both the SDL Product Activation wizard and the SDL License Manager can be used to perform all
three types of activation.
The Product Activation Wizard
The SDL Product Activation wizard is displayed automatically when you are installing the SDL
Trados 2007 product. It is also displayed automatically whenever you open a product that has not
been activated.
This is the opening page of the SDL Product Activation wizard:
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 24/116
About Ac t i va t i n g SDL Trados 2007 Produc ts2
2-10SDL TRADOS 2007 INSTALLATION GUIDE
The SDL Product Activation wizard contains options to perform the following actions:
C Activate the product online.
C Activate the product by setting up access to the server where floating licenses are being
managed.
C Activate the product by linking it to a (*.lic ) file located on your personal computer.
C Connect to the SDL website and purchase a valid license or to continue using the software in
trial mode. This option is for users who have been using the software in trial mode.
Choose the required option and click Next to continue.
There are two other versions of this opening page. They are specific to users working in trial mode.
This version of the opening page is displayed when the 30 day trial period has expired and theproduct is running in demo mode:
C To continue running the product in demo mode, select Continue in demo mode. To find out
more about demo mode restrictions, go to page 2-36.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 25/116
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 26/116
About Ac t i va t i n g SDL Trados 2007 Produc ts2
2-12SDL TRADOS 2007 INSTALLATION GUIDE
SDL License Manager
SDL License Manager is installed with SDL Trados 2007 and is always available.
SDL License Manager contains options for:
C Activating licenses online.
C Viewing licenses that were activated online.
C Returning licenses that were activated online.
C Setting up your software to use floating licenses.
C Setting up your software to use a node locked softkey license file.
To display SDL License Manager, go to Start > Programs > SDL International > SDL Trados 2007 >
License Manager > License Manager.
These tools are used for
online activation and
management of licenses
activated online
These tools are used to access
floating licenses stored on a server
computer or to manage license files
on your personal computer
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 27/116
Act i va t i n g your Produc t us i n g the SDL Produc t Ac t i va t i on Wi za rd2
SDL TRADOS 2007 INSTALLATION GUIDE
2-1
ACTIVATING YOUR PRODUCT USING THE SDLPRODUCT ACTIVATION WIZARD
Depending on the type of activation you are about to perform, you will need:
C the product activation code, or
C the name and port number of the server where floating licenses are managed, or
C the location of your node locked softkey license file.
To activate your product using the SDL Product Activation Wizard:
The SDL Product Activation wizard is displayed:
C
Automatically at the end of installing the software.
C Automatically every time you start software that has not yet been activated.
1 The wizard opens at the Product Activation page.
NOTED
If you are using SDL Trados 2007 software on a 30 day trial, the opening page may havedifferent options. However, all versions have the Show me how to activate the product option.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 28/116
Act i va t i n g your Produc t us i n g the SDL Produc t Ac t i va t i on Wi za rd2
2-14SDL TRADOS 2007 INSTALLATION GUIDE
2 Select I have purchased a license. Show me how to activate the product. and click Next.
The Select Activation Method page is displayed.
3 Choose an activation method:
C If you will be using floating licenses, select Connect to a local license server, click Next andgo to step 4.
C If you have a personal node locked softkey (*.lic ) license file, select Use a local license file, click Next and go to step 5.
C If you have a product activation code, select Activate your product online, click Next and goto step 6.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 29/116
Act i va t i n g your Produc t us i n g the SDL Produc t Ac t i va t i on Wi za rd2
SDL TRADOS 2007 INSTALLATION GUIDE
2-1
4 This version of the Product Activation page is displayed if you selected Connect to a local
license server:
C Overtype the entry in the Select license server box with the name and port number of theserver used to manage floating licenses. The entry should take the form:port_number@server_name with no spaces.
C Click Next. The server details are authenticated. If the server details are correct, activationis complete. Click Finish to exit the wizard.
C If activation fails, click Back to return to the previous page. Check that the server name andport number are correct and that you have entered them in the correct format. Click Next.
5 This version of the Product Activation page is displayed if you selected Use a local license file:
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 30/116
Act i va t i n g your Produc t us i n g the SDL Produc t Ac t i va t i on Wi za rd2
2-16SDL TRADOS 2007 INSTALLATION GUIDE
C Click Browse and navigate to the folder containing the (*.lic ) license file. When you haveselected the folder, check that the correct details appear in the Select license file box andthen click Next.
C If the product was activated successfully, click Finish to exit the wizard.
C If product activation failed, click Back to return to a previous page. Correct the folderdetails you specified and then click Next to continue.
6 This version of the Product Activation page is displayed if you selected Activate your product
online. Enter your activation code in the boxes provided.
C If you have copied the activation code to the clipboard you can press [Ctrl+V] to insert thecode in the boxes or you can right-click and select Paste from the shortcut menu.
C If you use a proxy server to access the Internet, click Advanced. The Advanced Settings dialog box is displayed. Enter the proxy server details and your username and password forthe server, then click OK to close the dialog box.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 31/116
Act i va t i n g your Produc t us i n g the SDL Produc t Ac t i va t i on Wi za rd2
SDL TRADOS 2007 INSTALLATION GUIDE
2-1
NOTED
Your system administrator will tell you if you need to use a proxy server and will give you theserver details.
7 Click Next. The wizard connects to the SDL website to validate the code.
C If the product was activated successfully, click Finish to exit the wizard.
C If product activation failed because you entered the wrong code, click Back to return to aprevious page. Update the activation code and click Next.
NOTED
If activation failed for some other reason, speak to your administrator.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 32/116
Act i va t i n g your Produc t us i n g SDL L i cen se Man ager2
2-18SDL TRADOS 2007 INSTALLATION GUIDE
ACTIVATING YOUR PRODUCT USING SDL LICENSEMANAGER
You can use SDL License Manager to activate your product online, to connect to a floating license
server orto connect to a local softkey license file.
Activating your Product Online
You will need the activation code that you downloaded earlier.
NOTED
You must be connected to the Internet to activate a product online.
1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > LicenseManager. The SDL License Manager dialog box is displayed.
NOTED
SDL License Manager can also be displayed by selecting the License Manager option on theproduct Help menu.
These tools are used
for online activation
and management of licenses activated
online
These tools are used to manage
license files
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 33/116
Act i va t i n g your Produc t us i n g SDL L i cen se Man ager2
SDL TRADOS 2007 INSTALLATION GUIDE
2-1
2 Click Activate Online to display the Enter Activation Code page.
3 Complete the Enter Activation Code page.
C Enter your activation code in the boxes provided. If you have copied the code to theclipboard you can press [Ctrl+V] to insert the code in the boxes or you can right-click andselect Paste from the shortcut menu.
C If you use a proxy server to access the Internet, click Advanced. The Advanced Settings dialog box is displayed. Enter the server details and your username and password for the
server then click OK to close the dialog box.
4 Click Next. The wizard connects to the Internet to validate the code.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 34/116
Act i va t i n g your Produc t us i n g SDL L i cen se Man ager2
2-20SDL TRADOS 2007 INSTALLATION GUIDE
C If the Activation Failed page is displayed, check the reason for the failure. You can eitherclick Back to go back to an earlier stage and correct the error or click Finish to exit thewizard.
C If the activation code is valid the Activation Successful page is displayed:
5 Click Finish to exit the wizard.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 35/116
Act i va t i n g your Produc t us i n g SDL L i cen se Man ager2
SDL TRADOS 2007 INSTALLATION GUIDE
2-2
Activating your Product using Floating Licenses
You will need the name of the license server and the number of the port used to access the server.
Your system administrator will give you this information.
To activate your product using floating licenses:
1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License
Manager. The SDL License Manager wizard is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 36/116
Act i va t i n g your Produc t us i n g SDL L i cen se Man ager2
2-22SDL TRADOS 2007 INSTALLATION GUIDE
2 Click License Locations. The Change License Locations and Test Files page is displayed.
3 Click Add. The Specify FLEXlm License Location page is displayed.
4 Select the first option: Enter the port and name of the computer where SDL License
Server is installed. The box below the option opens ready for editing.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 37/116
Act i va t i n g your Produc t us i n g SDL L i cen se Man ager2
SDL TRADOS 2007 INSTALLATION GUIDE
2-2
5 In the box, enter the name and port of the server where the floating licenses are stored.
The format for this information is port number@server name. For example, if your
server is server01 and the number of the port to be used is 27000, the entry would look
like this: 27000@server01.
6 Click OK. The server is added to the list under License file locations in the Change
License Locations and Test Files page.
7 Click OK to close the Change License Locations and Test Files page. The licenses
available to borrow now appear in the License Status box.
8 Click Close to close SDL License Manager.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 38/116
Act i va t i n g your Produc t us i n g SDL L i cen se Man ager2
2-24SDL TRADOS 2007 INSTALLATION GUIDE
Activating your Product using a Personal Softkey License File
1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License
Manager. The SDL License Manager dialog box is displayed.
2 Click License Locations. The Change License Locations and Test Files page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 39/116
Act i va t i n g your Produc t us i n g SDL L i cen se Man ager2
SDL TRADOS 2007 INSTALLATION GUIDE
2-2
3 Click Add. The Specify FLEXlm License Location page is displayed.
4 Select the second option: Enter the path to the license file. The box below the option
opens ready for editing.
5 Click Browse and browse to the folder where your license file is stored.
6 Select the file and click OK to close the Specify FLEXlm License Location page.
7 Click OK. The license is added to the list under License file locations in the Change
License Locations and Test Files page.
8 Click OK to close the Change License Locations and Test Files page.
9 Click Close to close SDL License Manager.
You may have to stop and restart your software in order for the software to start using the license file.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 40/116
Man ag i n g L i cen ses fo r Produc ts Ac t i va ted On l i n e2
2-26SDL TRADOS 2007 INSTALLATION GUIDE
MANAGING LICENSES FOR PRODUCTS ACTIVATEDONLINE
The tools available for managing products activated online enable you to:
C View your licenses.
C Return a license so that it can be used on another computer.
C Repair a license.
Viewing Licenses
The Installed Licenses dialog box lists the licenses that you currently have installed. The list includes
both trials and activated products.Each license is shown as a Fulfillment.
To view your installed licenses:
1 Go to Start > Program Files > SDL Trados 2007 > License Manager > License Manager. The SDL
License Manager dialog box is displayed.
2 Click View Licenses. The Installed Licenses dialog box is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 41/116
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 42/116
Man ag i n g L i cen ses fo r Produc ts Ac t i va ted On l i n e2
2-28SDL TRADOS 2007 INSTALLATION GUIDE
Returning a License or Licensing your Product on a Different Computer
To license your product on a different computer you simply return the license to the SDL licensing
website and then use the same activation code to activate the product on the other computer.
1 Go to Start > Program Files > SDL Trados 2007 > License Manager > License Manager. The SDL
License Manager dialog box is displayed.
2 Click View Licenses. The Installed Licenses dialog box is displayed.
3 Select the license to be returned and click Return License. The license is returned to the
online product activation centre.
You can now install the product on another machine and then activate the product online using the
same product activation key.
WARNINGF
If you do not return your license, you will not be able to activate the product on another machine.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 43/116
Man ag i n g L i cen ses fo r Produc ts Ac t i va ted On l i n e2
SDL TRADOS 2007 INSTALLATION GUIDE
2-2
Repairing a License
If your license is damaged, this procedure describes how to get it repaired. A license may become
damaged if it has been restored from a backup and needs to be verified or if the system clock on your
computer has changed.
NOTED
You cannot repair a damaged 30 day trial license.
1 Go to Start > Program Files > SDL Trados 2007 > License Manager > License Manager. The SDL
License Manager dialog box is displayed.
2 Click View Licenses. The Installed Licenses dialog box is displayed.
3
Select the license to be repaired and click Repair License. The repair request is sent tothe online product activation centre.
C If the repair is successful a dialog box confirms that the repair has been made and thestatus of the license changes to OK in the Status column of the Installed License dialogbox. Go to step 7.
C If the license could not be repaired the Damaged License Removed dialog box is displayedand the license is deleted from the list in the Installed Licenses dialog box. Click Close toclose the Damaged License Removed dialog box.
4 Click Close to close the Installed Licenses dialog box.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 44/116
Man ag i n g F loa t i n g L i cen se F i l es2
2-30SDL TRADOS 2007 INSTALLATION GUIDE
If your license cannot be repaired and has been removed from the Installed Licenses dialog box:
C Log on to the SDL customer website and return your license.
C When you have successfully returned the license, activate the product online using the
original activation code.
If you are not able to return the license, contact SDL support.
MANAGING FLOATING LICENSE FILES
This section describes how to:
C Borrow a floating license so that you can work with the SDL Trados 2007 product when you
are not connected to the network.
C Return a borrowed floating license early.
C Switch to a different floating license server.
Borrowing a Floating License
If you need to use an SDL Trados product when not connected to the network you can ‘borrow’ a
floating license. For example, you may want to use an SDL Trados product on a laptop computer
when visiting a customer site.
When you borrow a license you specify how long you will need the license and it remains valid on
your computer until the period you specified expires. When this period of time expires you do not
have to return the license: it simply ceases to be valid for your copy of the software. At the time the
licence ceases to be valid for you, it automatically becomes available for other users to borrow.
If you finish working with the SDL Trados software before the end of the loan period, you can choose
to return the license early.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 45/116
Man ag i n g F loa t i n g L i cen se F i l es2
SDL TRADOS 2007 INSTALLATION GUIDE
2-3
To borrow a floating license:
1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License
Manager. The SDL License Manager dialog box is displayed.
2 Click Borrow or Return. The Borrow a License dialog box is displayed.
3 From the list displayed under Choose the applications, select the application(s) for
which you want to borrow a license.
4 Complete the Borrow license until boxes by selecting the date and time when you will
be ready to return the license.
5 Click Borrow. The following dialog box is displayed:
6 Click OK to close the dialog box.
7 Click Close to close the Borrow a License dialog box.
8 Click Close to close the SDL License Manager dialog box.
You can see the current status of your license by selecting Help > About from the menu bar of the
SDL Trados application for which the license was borrowed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 46/116
Man ag i n g F loa t i n g L i cen se F i l es2
2-32SDL TRADOS 2007 INSTALLATION GUIDE
Returning a Borrowed License Early
If you no longer need a borrowed license and the loan period has not yet expired, you can return the
license early.
NOTED
If you do not return the license early, it will be returned automatically at the date and time youspecified as the end of the loan period.
To return a borrowed license early:
1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License
Manager. The SDL License Manager dialog box is displayed.
2 Click Borrow or Return. The Borrow a License dialog box is displayed.
3 Select the application for which you are returning the license and click Return Early.
The following dialog box is displayed:
4 Click OK to close the dialog box.
5 Click Close to close the Borrow a License dialog box.
6 Click Close to close the SDL License Manager dialog box.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 47/116
Man ag i n g F loa t i n g L i cen se F i l es2
SDL TRADOS 2007 INSTALLATION GUIDE
2-3
Changing your Floating License Server
If your organization moves its floating licenses to a different server, you will have to update SDL
License Manager with details of the new server.
To update SDL License Manager with new license server details:
1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License
Manager. The SDL License Manager dialog box is displayed.
2 Click License Locations. The Change License Locations and Test Files dialog box is
displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 48/116
Man ag i n g F loa t i n g L i cen se F i l es2
2-34SDL TRADOS 2007 INSTALLATION GUIDE
3 Click Edit. The Specify SDL FLEXlm License Location dialog box is displayed.
4 Change the server and port details currently displayed under Enter the port and name
of the computer where SDL License Server is installed and click OK. The updated server
details appear under License file locations in the Change License Locations and Test
Files dialog box.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 49/116
Man ag i n g F loa t i n g L i cen se F i l es2
SDL TRADOS 2007 INSTALLATION GUIDE
2-3
5 Click OK to close the Change License Locations and Test Files dialog box. The licenses
available to borrow now appear in the License Status box of the SDL License Manager
dialog box.
6 Click Close to close SDL License Manager.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 50/116
Demo Mode2
2-36SDL TRADOS 2007 INSTALLATION GUIDE
DEMO MODE
When copy protected SDL Trados 2007 software is running in demo mode, the following restrictions
apply:
Application Restriction
Translator's Workbench Translation memories may contain a maximum of 100
translation units
Export Frequent Segments, Export Unknown Segments, Use
TM from Previous Analysis and Create Project TM options in
the Analyse dialog box are not available
WinAlign Projects may contain a maximum of 20 files (10 source and
10 target files)
You cannot save alignment result files and you cannot export
alignment results
S-Tagger for FrameMaker Maximum file sizes handled:
MIF files: 300 KB
RTF files: 50 KB
TXT files: 25 KB
IASCII files: 30 KB
S-Tagger for Interleaf Maximum file sizes handled:
RTF files: 50 KB
TXT files: 25 KB
Font Mapper for FrameMaker Only processes MIF files of up to 300 KB in size
Font Mapper for Interleaf Only processes IASCII files of up to 300 KB in size
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 51/116
Chapt
INSTALLING SDL TRADOS 2007
SUITE PROFESSIONAL
This chapter contains all the information you need to install
SDL Trados 2007 Suite Professional. It describes the hardware
and software requirements for running SDL Trados 2007 Suite
Professional and provides a step by step guide to installing SDL
Trados 2007 Suite. Sections include:
C System Requirements
C About the SDL Trados 2007 Suite Professional Installer
C Installing SDL Trados 2007 Suite -Professional
C Maintaining your Installation
C What’s Next?
3
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 52/116
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 53/116
Sys tem Requi r emen ts3
SDL TRADOS 2007 INSTALLATION GUIDE
3-
Companion Software Required by SDL Trados 2007 Suite - Professional
This is the non-SDL software that you need to have installed on your machine in order for SDL
Trados 2007 Suite - Professional to function fully.
C Microsoft Word 2000 or later. Translator's Workbench requires this for processing Word or
RTF-based files.
C Microsoft Excel 2000 or later. This is required for processing Excel files.
C Microsoft PowerPoint 2000 or later. This is required for processing PowerPoint files.
C Microsoft Internet Explorer 6 or higher is required to use the HTML-based help systems that
ship with SDL Trados 2007 Suite. If you do not already have Internet Explorer 6, you will need
to download it from the Microsoft website.
Language Support
C In general, language support in SDL Trados 2007 Professional corresponds to the language
support that is installed on your system. For more information about specific support for bi-
directional and double-byte character set (DBCS) languages in Translator’s Workbench, see
the online help.
C We recommend using a localized version of Windows 2000, Windows XP or Windows Vista
for translating to and from non-western, bi-directional and DBCS languages.
C If you are working with Hindi or other Indic languages, we highly recommend that you use
the Arial Unicode MS font. This font ships with Microsoft Office. For more information on
this font, refer to the Microsoft website and knowledge base.
Upgrading from an Earlier Version of SDL Trados
It is not necessary to uninstall earlier versions of SDL Trados before installing SDL Trados 2007
Suite. You can install SDL Trados 2007 Suite on the same machine where earlier versions are
installed and continue to use the old versions with the new one. However, you cannot use differentSDL Trados versions at the same time.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 54/116
About the SDL Trados 2007 Su i t e Pro fess i on a l In s ta l l e r3
3-4SDL TRADOS 2007 INSTALLATION GUIDE
ABOUT THE SDL TRADOS 2007 SUITE PROFESSIONALINSTALLER
This section describes the software components that are included in the SDL Trados 2007 Suite -
Professional installation program.
SDL Trados 2007 Suite - Professional Components
This is a complete list of SDL Trados 2007 Suite - Professional components. In a default installation
they are all installed.
SDL Trados 2007 Provides translation and translation project management tools.
Synergy Provides project creation and management tools for SDL Trados.Project management can quickly create and distribute projects
and track project progress in real-time. Project team members
work with project files using SDL Trados translation tools and
share project resources such as translation memories online.
SDLX Enables SDL Trados 2007 to handle files created in SDLX and
SDL TMS.
*Translator’s Workbench The SDL Trados 2007 translation memory tool.
*TagEditor A special tool for editing tagged files.
*WinAlign Enables you to create translation memories from previously
translated files.
*S-Taggers Converts FrameMaker MIF or Interleaf files to a tagged format so
that tags are preserved correctly during translation.
*Font Mappers Maps fonts into Asian fonts when translating FrameMaker and
Interleaf files.
*Story Collectors Extracts translatable text from PageMaker and QuarkXPress files.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 55/116
About the SDL Trados 2007 Su i t e Pro fess i on a l In s ta l l e r3
SDL TRADOS 2007 INSTALLATION GUIDE
3-
NOTED
It is possible to choose not to install the components marked with an asterisk (*). This wouldbe a Custom installation.
The latest Word template file is automatically installed with Translator’s Workbench. The templates
are: TRADOS8.dot for Word 2000-2003 and TRADOS8.dotm for Word 2007. This template is
necessary to enable the SDL Trados - Word editing interface.
There is a further SDL Trados component, SDL Trados Desktop SDK. This component is not
included in a default installation as it is a software developer tool not a translation tool.
Other Software Installed with SDL Trados 2007 Suite
In addition to SDL Trados 2007 Suite components, other software is included in the installation
program. This additional software is required either by the installation program itself or by SDL
Trados 2007 Suite - Professional. You will probably have some of these additional software
components on your computer already as they are used by many software applications:
C Install Script Engine 10.5
C Windows Installer 3.1
C Microsoft .NET Framework version 2.0.
C Java Runtime Engine (such as version JRE1.5.0_10) is required to translate RC, OpenOffice,
Java Properties and InDesign CS2 (INX) files. If Java Runtime Engine is not installed on your
machine, the SDL Trados 2007 Suite installer program will install it for you.
SDL Passolo Essential A localization tool for text resource translation and software
localization. Text resources are the text components of a
software that are displayed on screen. SDL Passolo Essential
includes all main functions needed for the localization of
software, however there are some restrictions compared to
the Professional and Team Editons of the software. For more
information, refer to the SDL Passolo Getting Started Guide
and SDL Passolo Handbook included with SDL Passolo
Essential. You can access this documentation from the Start
view in SDL Trados Synergy or through the Windows Start
menu under All Programs > SDL Passolo > Manuals.
*Activation Utility for
SDL Trados 2007
You will need this to activate your SDL Trados 2007 product on
line.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 56/116
About the SDL Trados 2007 Su i t e Pro fess i on a l In s ta l l e r3
3-6SDL TRADOS 2007 INSTALLATION GUIDE
Installation Location
The default installation location for SDL Trados 2007 Suite - Professional components is:
C:\Program Files\SDL International\T2007.
The default installation for SDL Passolo Essential is:
C:\Program Files\SDL Passolo 2007.
During installation, you have the option of choosing a different installation location. This choice
applies to the root folder for SDL Trados 2007 Suite Professional software, the T2007 folder. You can
also choose a different installation location for SDL Passolo Essential.
All components of SDL Trados 2007 Suite Professional, apart from SDL Passolo Essential, install to
their respective subfolders below the SDL Trados 2007 folder at the specified location. It is not
possible to install components to different instances of the SDL Trados 2007 folder on the same
computer. The installer guarantees that all SDL Trados 2007 Suite Professional components are
located in the same SDL Trados 2007 folder.
NOTED
Access restrictions to certain SDL Trados 2007 Suite Professional files and folders may applyto some users on Windows Vista, Windows 2000 or Windows XP systems. For moreinformation, see “Access Restrictions” on page 2-32.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 57/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
SDL TRADOS 2007 INSTALLATION GUIDE
3-
INSTALLING SDL TRADOS 2007 SUITE -PROFESSIONAL
The installation routine for SDL Trados 2007 Suite - Professional is based on an installation wizard
which guides you through the setup process.
C To install SDL Trados 2007 Suite - Professional on a Windows Vista, Windows 2000 or
Windows XP operating system, you must have local administrator rights.
C The installer also supports administrative and silent installation. For information about an
administrative installation, See “Other Installation Options” on page 3-27. For more
information about a silent installation, See “Silent Installation” on page 3-28.
Installing SDL Trados 2007 Suite - ProfessionalBefore you start:
C Locate either the downloaded product files or the product CD.
C Ensure that you have Internet Explorer 6 installed.
C If you want to log the installation, read the instructions on page 3-28.
To install SDL Trados 2007 Suite Professional:
1 If you downloaded the product from a website, double-click the downloaded file. The SDLTrados 2007 Suite - Professional wizard is displayed. This wizard prepares the product
installation files and places them in the correct location. Move through the wizard by clicking
Next and accepting the default values offered until the Welcome to SDL Trados 2007 Suite -
Professional page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 58/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
3-8SDL TRADOS 2007 INSTALLATION GUIDE
If you have a product CD, run the CD. The Welcome to SDL Trados 2007 Suite - Professional page
is the first page to be displayed.
2 On the Welcome to SDL Trados 2007 Suite - Professional page, click the Installation
Software link. The Installation Software page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 59/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
SDL TRADOS 2007 INSTALLATION GUIDE
3-
3 Click Install SDL Trados 2007 Suite. The opening screen of the SDL Trados 2007 Suite
Installer is displayed. It lists the software that will be installed.
C To install all components, go to step 4.
C To remove an item from the list, click Advanced. The Components List dialog box isdisplayed. Clear the selection from the item not to be installed and click OK. Rememberthat all of the components are necessary for SDL Trados 2007 Suite to run.
4 Click Install. If you do not currently have the .NET Framework 2.0 installed, it is
installed now. Installation will take a few minutes.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 60/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
3-10SDL TRADOS 2007 INSTALLATION GUIDE
C If you do not currently have the Windows Installer 3.1 or the Install Script Engine installed,these will be installed first. To install these components accept the license conditions foruse and keep clicking Next.
5 If you do not currently have the Microsoft Visual C++ 2005 Redistributable installed,
this dialog box is displayed next.
C Click Yes. This dialog box is displayed. It indicates that the Microsoft Visual C++ 2005Redistributable software is being installed.
6 If you do not currently have the Java 2 Runtime Environment installed this dialog box
is displayed next.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 61/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
SDL TRADOS 2007 INSTALLATION GUIDE
3-1
C The License Agreement dialog box is displayed when the Java 2 Runtime Environmentinstallation is ready to proceed.
C Click Accept. The Java 2 Runtime Environment is now installed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 62/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
3-12SDL TRADOS 2007 INSTALLATION GUIDE
7 After a few minutes, when the installation is complete, the Next button is activated.
Click Next, the Welcome page of the SDL Trados 2007 Suite installation wizard is
displayed.
8 Click Next. The License Agreement page for SDL Trados 2007 Suite is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 63/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
SDL TRADOS 2007 INSTALLATION GUIDE
3-1
9 Accept the license terms and click Next. The Customer Information page is displayed.
10 Enter your details and click Next. The Setup Type page is displayed.A Default installation is
selected by default.
11 If you want to perform a default installation, click Next. The Ready to Install page is displayed.
Go to step 12.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 64/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
3-14SDL TRADOS 2007 INSTALLATION GUIDE
12 If you do not want to install all of the default components, select Custom and click Next. The
Custom Setup page is displayed. Items with a red beside them will not be installed.
C To see what sub-features are included in a component, click the plus (+) sign preceding thecomponent.
C To exclude a component from the installation, click the down arrow beside the componentand select This feature will not be available.
C To include a currently excluded component, click the down arrow beside the componentand select This feature and all subfeatures will be installed on local hard drive.
C To change the default installation location, click Change and complete the Change CurrentInstallation Folder dialog box. When you have selected the required location, click OK.
C To view the space requirements for the software, click Space to display the Disk SpaceRequirements dialog box. Click OK when you have finished.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 65/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
SDL TRADOS 2007 INSTALLATION GUIDE
3-1
13 Click Next. The Ready to Install Program page is displayed.
14 Click Install to begin installing SDL Trados 2007 Suite. A status bar indicates installation
progress.
15 When SDL Trados 2007 Suite has been installed the End-User License Agreement page for
SDL Trados Synergy is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 66/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
3-16SDL TRADOS 2007 INSTALLATION GUIDE
16 Accept the license terms and click Next. The Destination Folder page is displayed.
C If you want to install SDL Trados Synergy to a different location, click Browse. The ChangeDestination Folder dialog box is displayed. Navigate to the required folder and click OK toreturn to the Destination Folder page.
17 Click Next. The Ready to install SDL Trados Synergy 2007 page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 67/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
SDL TRADOS 2007 INSTALLATION GUIDE
3-1
18 Click Install. The Installing SDL Trados Synergy 2007 page is displayed. The Status bar
shows installation progress.
19 When SDL Trados Synergy has been installed the Completed the SDL Trados Synergy
2007 Setup Wizard page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 68/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
3-18SDL TRADOS 2007 INSTALLATION GUIDE
20 Click Finish. The SDLX installer is launched.
21 Click Next the SDLX 2007 License Agreement page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 69/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
SDL TRADOS 2007 INSTALLATION GUIDE
3-1
22 Accept the terms of the license and click Next. The Choose Destination Location page
is displayed. It shows where SDLX 2007 will be installed.
C To install SDLX to a different location click Browse and use the Choose Location dialog boxto select the location.
23 Click Next. The Ready to Install Program page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 70/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
3-20SDL TRADOS 2007 INSTALLATION GUIDE
24 Click Install to begin the SDLX 2007 installation. When SDLX has been installed the
SDLX Installation Wizard Completed page is displayed
25 Click Finish. The SDL Passolo Essential installer is launched.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 71/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
SDL TRADOS 2007 INSTALLATION GUIDE
3-2
26 Click Next. The Destination Location page is displayed.
C If you want to install SDL Passolo Essential to a different location, click Browse. The SelectDestination Location dialog box is displayed. Navigate to the required folder and click OK to return to the Destination Location page.
27 Click Next. The Select Components page is displayed. It lists the different items that
will be installed.
C To install all items, go to step 28.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 72/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
3-22SDL TRADOS 2007 INSTALLATION GUIDE
C To remove an item from the list, clear the check box next to the item. To install SDLPassolo, ensure that the check box next to Program Files is selected.
28 Click Next. The Important Note page is displayed.
29 If you have a previous install of SDL Passolo Essential running on your machine, close
the application and then click Next. The Start Installation page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 73/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
SDL TRADOS 2007 INSTALLATION GUIDE
3-2
30 Click Install to begin installing SDL Passolo Essential. The Installing page is displayed.
The All Files section shows installation progress.
C Microsoft Primary Interperability Assemblies 2005 is installed.
C Your system configuration is updated with the SDL Passolo Essential install.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 74/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
3-24SDL TRADOS 2007 INSTALLATION GUIDE
31 When SDL Passolo Essential has been installed, the following page is displayed.
32 Click Finish. The product Activation Utility for SDL Trados 2007 Suite prepares to
install.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 75/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
SDL TRADOS 2007 INSTALLATION GUIDE
3-2
33 When the activation utility has been installed the SDL Product Activation wizard is
displayed.
34 Choose an option and click Next. The options available are:
C Go to the SDL website and purchase a software license for SDL Trados 2007 Suite.
C Activate a license you have already purchased.
C Work with the software free of charge for 30 days in trial mode.
NOTEDFor more information about the Product Activation Wizard, See “Activating your Product usingthe SDL Product Activation Wizard” on page 2-13.
35 If you chose either of the first two options you are taken to the appropriate screen and
guided through the rest of the selected process.
36 If you chose to continue with the free trial, the installation is now complete.
SDL Trados 2007 Suite is now added to the Start menu on your desktop. Use the Start menu to
launch each component as a stand-alone application.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 76/116
In s ta l l i n g SDL Trados 2007 Su i t e - Pro fess i on a l3
3-26SDL TRADOS 2007 INSTALLATION GUIDE
Licensing
You can now use SDL Trados 2007 Suite for 30 days before you need to purchase a valid license and
activate the product. If after 30 days you have not yet purchased a license, SDL Trados 2007 Suite
and SDL Trados Synergy 2007 will cease to function or will function in demo mode only.
For more information about licensing, see Chapter 2 Licensing SDL Trados 2007 .
For more information about demo mode, see “Demo Mode” on page 2-36.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 77/116
Other In s ta l l a t i on Opt i on s3
SDL TRADOS 2007 INSTALLATION GUIDE
3-2
OTHER INSTALLATION OPTIONS
Administrators may wish to use these alternative methods for distributing and installing SDL Trados
2007 Suite.
Administrative Installation
In an administrative installation, the system administrator copies the installer files to a location that
is always available, typically a network drive. This means that the setup files are permanently
accessible to anyone who wants to install SDL Trados 2007 Suite or modify or repair their SDL
Trados 2007 Suite installation.
To perform an administrative installation of SDL Trados 2007 Suite:
1 From the Start menu, choose Run.
In the Run dialog box, use the following syntax to specify the location of the SDL Trados 2007
Suite setup files if you downloaded the installer:
Msiexec /a "c:\path to msi\SDL Trados 2007.msi".
If you are using a product CD, insert the SDL Trados 2007 Suite product CD into the
computer’s CD-ROM drive and use the following syntax in the Run dialog box to specify the
location of the SDL Trados 2007 Suite setup files:
Msiexec /a "d:\path to msi\SDL Trados 2007.msi".
C Msiexec is the Windows installer service.
C /a denotes an administrative installation.
C c:\ is the hard drive, d:\ is the CD-ROM drive.
2 Click OK to start the installation wizard.
3 On the Network Location screen, specify the target location for the copy you make of the setup
files.
4 Click Install to create the copy in the specified location.
5 When the process is complete, click Finish to close the installation wizard.
NOTED
This procedure only copies the SDL Trados 2007 Suite setup files to the specified location; itdoes not constitute an actual installation. Use the setup files to run the installation wizard andinstall, modify or repair the software in the usual way.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 78/116
Other In s ta l l a t i on Opt i on s3
3-28SDL TRADOS 2007 INSTALLATION GUIDE
Logging an Installation
It is possible to log an installation to a TXT or LOG file. This log file provides the installation results
and is useful for troubleshooting any installation problems.
To log an installation:
1 From the Start menu on your computer, choose Run. In the Run dialog box, use the following
syntax to specify the location and file name of your setup files and the installation log file:
Msiexec /I "c:\path to msi\myinstall.msi" /l*v
"c:\path to logfile\mylog.txt"
C Msiexec is the Windows installer service.
C /i denotes the installation request.
C /l*v denotes a verbose log file.
To customize the installation log file, substitute /l*v with the alternatives below:
C /le denotes a log file containing errors only.
C /lw denotes a log file containing warnings only.
C /lp+ denotes a log file containing properties only.
2 Click OK to start the installation and create the installation log file.
NOTED
When you run Setup.exe it automatically creates a log file.
Silent Installation
To perform a silent installation:
1 Select Run from the Start menu.
2 Enter the command:
msiexec.exe /i "<CompletePathTo 'SDL Trados 2007.msi'>" /qn
This runs the default installation.
The installation location is the same as for a standard installation. See “Installation Location” on
page 3-6. For more information about silent installation, see the online support center at
support.sdl.com.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 79/116
Mai n ta i n i n g your In s ta l l a t i on3
SDL TRADOS 2007 INSTALLATION GUIDE
3-2
MAINTAINING YOUR INSTALLATION
You can modify, repair or remove your SDL Trados 2007 Suite installation at any time using the
program maintenance features available with the installer. These features are available on the
Program Maintenance screen of the installation wizard:
C Modify – use this option to add or remove components to and from your installation.
C Repair – use this option to repair or restore missing files, shortcuts or registry entries in your
installation.
C Remove – use this option to remove the SDL Trados 2007 Suite software set completely from
your computer.
You can access the installation wizard and program maintenance features through the Add or
Remove Programs Properties dialog box in the Control Panel of your computer. Alternatively, if youstill have access to the installer setup files, you can start the wizard by double-clicking the SDL
Trados 2007.msi file.
NOTED
To repair or modify your SDL Trados 2007 Suite installation, you must have access to theinstaller setup files in their original location.
Modifying your Installation
You can add or remove components from your current installation. You can modify SDL Trados
2007 Suite, SDL Trados Synergy and SDLX.
To modify your installation:
1 From the Start menu on your computer, choose Settings > Control Panel.
2 In the Control Panel, select Add or Remove Programs to open the Add or Remove Programs
dialog box.
3
Select SDL Trados 2007 Suite from the list of programs and click Change. This starts the SDLTrados 2007 Suite installation wizard.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 80/116
Mai n ta i n i n g your In s ta l l a t i on3
3-30SDL TRADOS 2007 INSTALLATION GUIDE
4 In the installation wizard, click Next to continue to the Program Maintenance screen:
5 In the Program Maintenance screen, select Modify and then Next to continue.
6 The Custom Setup screen is displayed. It lists all SDL Trados 2007 Suite components and
indicates which components are currently included in your installation.
C Click on the plus (+) signs in the component tree to display all subfeatures.
C Select the components to add to your installation. Note that subfeatures cannot be installedindependently of their parent features.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 81/116
Mai n ta i n i n g your In s ta l l a t i on3
SDL TRADOS 2007 INSTALLATION GUIDE
3-3
C Mark the components to remove from your installation with an X. Removing a parentfeature also removes its subfeatures.
7 Click Next to continue and proceed with the installation as outlined in the previous section.
Repairing your Installation
Use the repair feature to repair or restore missing files or registry entries in your installation. You
can repair SDL Trados 2007 Suite, SDL Trados Synergy and SDLX.
To repair your installation:
1 From the Start menu on your computer, choose Settings > Control Panel.
2 In the Control Panel, select Add or Remove Programs.
3 Select SDL Trados 2007 Suite from the list of programs and click Change. This starts the SDL
Trados 2007 Suite installation wizard.
4 In the installation wizard, click Next to go to the Program Maintenance screen.
5 In the Program Maintenance screen, select Repair and then Next to continue.
6 On the Ready to Repair Program screen, click Install. The installation wizard
automatically runs the repair feature. When it is complete, click Finish.
Removing SDL Trados 2007 Applications
Use the Remove feature in the installer to remove SDL Trados 2007 Suite, SDL Trados Synergy and
SDLX files, folders and registry entries from your computer.
The Remove option is available on the Program Maintenance screen of the SDL Trados 2007 Suite
installation wizard. For more information on how to access this wizard, See ”Repairing your
Installation” on page 3-31.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 82/116
Mai n ta i n i n g your In s ta l l a t i on3
3-32SDL TRADOS 2007 INSTALLATION GUIDE
Access Restrictions
Access restrictions to certain SDL Trados 2007 Suite files and folders may apply to some users on
Windows Vista, Windows 2000 or Windows XP systems. The files that are most likely to be subject
to access restrictions are sample files.
Sample
The default installation location for SDL Trados 2007 sample files is:
C:\Documents and Settings\All Users\Shared Documents\SDL
Trados\Samples
This folder is accessible from the Start menu. Select Programs > SDL International > SDL Trados
2007 > Trados > Samples.
To use the sample files a user must have read/write access to the Samples subfolder. Alternatively,
the sample files can be copied to a location where the user does have read/write access.
The default installation location for SDL Passolo Essential sample files is:
C:\Documents and Settings\All Users\Documents\Passolo 2007\Samples
This folder is accessible from the Start menu. Select Programs > SDL Passolo 2007 > Samples.
Sharing a Computer
In SDL Trados 2007, all tag (.ini) and filter settings files (.xml) are stored in the folder \Documents
and Settings\All Users\Application Data\SDL International\Filters on Windows 2000 and Windows XP
operating systems and in the \ProgramData\SDL International\Filters folder on Windows Vista. You
must have read/write access to the appropriate folder in order to create filters and work with
XML/HTML/SGML files.
The owner of a computer is automatically granted read/write access to these folders, however, any
other user sharing the machine is not. To avoid Access Denied messages appearing in TagEditor on
closing XML/HTML/SGML files or on saving filter settings, it is necessary to give all users using a
machine read/write access to the Filters folder.
NOTED
On localized operating systems the folder structure partly uses names matching the languageof the operating system. For example, on a German Windows XP system the folder is called\Dokumente und Einstellungen\All Users\Anwendungsdaten\SDL International\Filters.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 83/116
What ’ s Nex t ?3
SDL TRADOS 2007 INSTALLATION GUIDE
3-3
Technical Support
For more information on technical support, please consult the online support center at
http://support.sdl.com.
WHAT’S NEXT?
The instructions in the SDL Trados 2007 Suite product user guides help you to quickly get started
with SDL Trados Synergy and SDL Trados 2007 Suite components. You can also view the product
tutorials for more information on using SDL Trados 2007 Suite.
SDL Trados 2007 Suite documentation can be found here: Start > Programs > SDL Trados 2007 >
Documentation. The tutorials can be found here: Start > Programs > SDL Trados 2007 > Tutorials.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 84/116
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 85/116
Chapte
INSTALLING SDL TRADOS 2007
SUITE FREELANCE
This chapter outlines how to install SDL Trados 2007 Suite
Freelance. It outlines system requirements for SDL Trados
2007 Suite Freelance and explains how to install the software.
Sections include:
C Overview
C About the SDL Trados 2007 Suite - Freelance Installer
C Installing SDL Trados 2007 Suite - Freelance
C Maintaining your SDL Trados 2007 Suite Freelance
Installation
C What’s Next?
4
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 86/116
Overv i ew4
4-2SDL TRADOS 2007 INSTALLATION GUIDE
OVERVIEW
This chapter explains the system requirements for installing and running SDL Trados 2007 Suite -
Freelance.
Hardware
C The minimum specification for using SDL Trados 2007 Suite - Freelance is a PC with a 1 GHz
Pentium IV or higher compatible processor and at least 512 MB RAM. We recommend 1024
MB.
C 300 MB of available disk space is required.
C A mouse or similar pointing device is required.
Platforms
SDL Trados 2007 Suite - Freelance runs on Windows Vista, Windows 2000 and Windows XP.
On all Windows versions, we recommend that you remove support for any non-Western languages
you do not work with from both the Windows Regional Options and the Microsoft Office Language
Settings. We highly recommend only using the languages that you are translating into and from in
both Windows and Word. For more information on how to achieve this, see the Windows and Word
online help systems.
Your display settings should be set to at least 256 colours (in Start > Settings > Control Panel >
Display > Settings).
Companion Software Required by SDL Trados 2007 Suite - Freelance
This is the non-SDL software that you need to have installed on your machine in order for SDL
Trados 2007 Suite Freelance to function fully.
C Microsoft Word 2000 or later. Translator's Workbench requires this for processing Word orRTF-based files.
C Microsoft Excel 2000 or later. SDL Trados requires this for processing Excel files.
C Microsoft PowerPoint 2000 or later. SDL Trados requires this for processing PowerPoint files.
C Microsoft Excel 2000 or later. This is required for processing Excel files.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 87/116
Overv i ew4
SDL TRADOS 2007 INSTALLATION GUIDE
4-
C Microsoft PowerPoint 2000 or later. This is required for processing PowerPoint files.
C Microsoft Internet Explorer 6 or higher is required to use the HTML-based help systems that
ship with SDL Trados 2007 Suite If you do not already have Internet Explorer 6, you will need
to download it from the Microsoft website.
Language Support
C In general, language support in SDL Trados 2007 Freelance corresponds to the language
support that is installed on your system. For more information about specific support for bi-
directional and double-byte character set (DBCS) languages in Translator’s Workbench, see
the online help.
C We recommend using a localized version of Windows Vista, Windows 2000 or Windows XP
for translating to and from non-western, bi-directional and DBCS languages.
C If you are working with Hindi or other Indic languages, we highly recommend that you use
the Arial Unicode MS font. This font ships with Microsoft Office. For more information on
this font, refer to the Microsoft website and knowledge base.
Upgrading from an Earlier Version of SDL Trados
It is possible to have SDL Trados 2007 Suite and earlier versions of SDL Trados installed on the same
machine. However, you cannot use different application versions at the same time.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 88/116
Overv i ew4
4-4SDL TRADOS 2007 INSTALLATION GUIDE
SDL Trados 2007 Suite - Freelance Product Restrictions
These restrictions apply to the SDL Trados 2007 Suite - Freelance product:
Synergy C You can create Synergy projects for personal use butyou cannot create Synergy project packages for
distribution.
C You can open and work with project packages
received from other SDL Trados users.
C You cannot forward packages received from other
users.
C You can access both file-based and server-based
translation memories from Synergy project packages.However, access to server-based translation
memories is restricted to access through the Internet
(no LAN access).
C You can connect to project tracking servers.
MultiTerm C You can access server-based SDL MultiTerm
termbases.
C You can create local, file-based termbases.
C You cannot open termbases in shared mode.
Languages C You can only work with five languages. This limit
applies to both Synergy projects and SDL Trados
translation tools.
Translation Memories C You can create local, file-based translation memories.
C You can access server-based translation memories
through the Internet.
C You cannot access translation memories in shared
mode.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 89/116
About the SDL Trados 2007 Su i t e - F ree lan ce In s ta l l e r4
SDL TRADOS 2007 INSTALLATION GUIDE
4-
ABOUT THE SDL TRADOS 2007 SUITE - FREELANCEINSTALLER
This section describes the software components that are included in the SDL Trados 2007 Suite
Freelance installation program.
SDL Trados 2007 Suite Suite - Freelance Components
This is a complete list of SDL Trados 2007 Suite - Freelance components. In a default installation
they are all installed.
SDL Trados 2007 Provides translation and translation project management tools.
Synergy Provides project creation and management tools for SDL Trados.Project management can quickly create and distribute projects
and track project progress in real-time. Project team members
work with project files using SDL Trados translation tools and
easily share project resources such as translation memories on
line.
SDLX Enables SDL Trados 2007 to handle files created in SDLX and
SDL TMS.
*Translator’s Workbench The SDL Trados 2007 translation memory tool.
*TagEditor A special tool for editing tagged files.
*WinAlign Enables you to create translation memories from previously
translated files.
*S-Taggers Converts FrameMaker MIF or Interleaf files to a tagged format so
that tags are preserved correctly during translation.
*Font Mappers Maps fonts into Asian fonts when translating FrameMaker and
Interleaf files.
*Story Collectors Extracts translatable text from PageMaker and QuarkXPress files.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 90/116
About the SDL Trados 2007 Su i t e - F ree lan ce In s ta l l e r4
4-6SDL TRADOS 2007 INSTALLATION GUIDE
NOTED
It is possible to choose not to install the components marked with an asterisk (*). This wouldbe a Custom installation.
The latest Word template file is automatically installed with Translator’s Workbench. The templates
are: TRADOS8.dot for Word 2000-2003 and TRADOS8.dotm for Word 2007. This template is
necessary to enable the SDL Trados - Word editing interface.
Other Software Installed with SDL Trados 2007 Suite
In addition to SDL Trados 2007 Suite components, other software is included in the installation
program. This additional software is required either by the installation program itself or by SDL
Trados 2007 Suite Freelance. You will probably have some of these additional software components
on your computer already as they are used by many software applications:
C Install Script Engine 10.5
C Windows Installer 3.1
C Microsoft .NET Framework version 2.0.
C Java Runtime Engine (such as version JRE1.5.0_10) is required to translate RC, OpenOffice,
Java Properties and InDesign CS2 (INX) files. If Java Runtime Engine is not installed on your
machine, the SDL Trados 2007 Suite installer program will install it for you.
SDL Passolo Essential A localization tool for text resource translation and software
localization. Text resources are the text components of a
software that are displayed on screen. SDL Passolo Essential
includes all main functions needed for the localization of
software, however there are some restrictions compared to
the Professional and Team Editons of the software. For more
information, refer to the SDL Passolo Getting Started Guide
and SDL Passolo Handbook included with SDL Passolo
Essential. You can access this documentation from the Start
view in SDL Trados Synergy or through the Windows Start
menu under All Programs > SDL Passolo > Manuals.
*Activation Utility for
SDL Trados 2007
You will need this to activate your SDL Trados 2007 product on
line.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 91/116
About the SDL Trados 2007 Su i t e - F ree lan ce In s ta l l e r4
SDL TRADOS 2007 INSTALLATION GUIDE
4-
Installation Location
The default installation location for SDL Trados 2007 Suite - Freelance components is:
C:\Program Files\SDL International\T2007_FL.
The default installation for SDL Passolo Essential is:
C:\Program Files\SDL Passolo 2007.
During installation, you have the option of choosing a different installation location. This choice
applies to the root folder for SDL Trados 2007 Suite Freelance software, the T2007_FL folder. You
can also choose a different installation location for SDL Passolo Essential.
All components of SDL Trados 2007 Suite - Freelance, apart from SDL Passolo Essential install to
their respective subfolders below the SDL Trados 2007 folder at the specified location. It is not
possible to install components to different instances of the SDL Trados 2007 folder on the same
computer. The installer guarantees that all SDL Trados 2007 Suite Freelance components are
located in the same SDL Trados 2007 folder.
NOTED
Access restrictions to certain SDL Trados 2007 Suite - Freelance files and folders may apply tosome users on Windows Vista, Windows 2000 or Windows XP systems. See ”AccessRestrictions” on page 4-32.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 92/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
4-8SDL TRADOS 2007 INSTALLATION GUIDE
INSTALLING SDL TRADOS 2007 SUITE - FREELANCE
The installation routine for SDL Trados 2007 Suite - Freelance is based on an installation wizard
which guides you through the setup process.
C To install SDL Trados 2007 Suite Freelance on a Windows Vista, Windows 2000 or Windows
XP operating system, you must have local administrator rights.
Before you start:
C Locate the downloaded SDL Trados 2007 Suite - Freelance product files.
C Ensure that you have Internet Explorer 6 installed.
To install SDL Trados 2007 Suite - Freelance:
1 If you downloaded the product from a website, double-click the downloaded file. The SDL
Trados 2007 Suite- Freelance wizard is displayed. The wizard prepares the product installation
files and places them in the correct location. Move through the wizard by clicking Next and
accepting the default values offered until the Welcome to SDL Trados 2007 Suite Freelance
page is displayed.
If you have a product CD, run the CD. The Welcome to SDL Trados 2007 Suite - Freelance page
is the first page to be displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 93/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
SDL TRADOS 2007 INSTALLATION GUIDE
4-
2 On the Welcome to SDL Trados 2007 Suite - Freelance page, click the Installation
Software link. The Installation Software page is displayed.
3 Click Install SDL Trados 2007 Suite - Freelance. The opening screen of the SDL Trados
2007 Suite Installer is displayed. It lists the software that will be installed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 94/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
4-10SDL TRADOS 2007 INSTALLATION GUIDE
C To remove an item from the list, click Advanced. The Components List dialog box isdisplayed. Clear the selection from the item not to be installed and click OK. Rememberthat all of the components listed in the Components List are necessary for Trados 2007 torun.
4 Click Install. If you do not currently have the .NET Framework 2.0 installed, it isinstalled now. Installation will take a few minutes.
C If you do not currently have the Windows Installer 3.1 or the Install Script Engine installed,these will be installed first. To install these components accept the license conditions foruse and keep clicking Next.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 95/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
SDL TRADOS 2007 INSTALLATION GUIDE
4-1
5 If you do not currently have the Microsoft Visual C++ 2005 Redistributable installed,
this dialog box is displayed next.
C Click Yes. This dialog box is displayed. It indicates that the Microsoft Visual C++ 2005Redistributable software is being installed.
6 If you do not currently have the Java 2 Runtime Environment installed this dialog box
is displayed next.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 96/116
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 97/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
SDL TRADOS 2007 INSTALLATION GUIDE
4-1
7 After a few minutes, when the other components have been installed, the Welcome
page of the SDL Trados 2007 Suite Freelance installation wizard is displayed.
8 Click Next to display the License Agreement page.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 98/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
4-14SDL TRADOS 2007 INSTALLATION GUIDE
9 Read through the contents of the license agreement, select I accept the terms in the license
agreement and click Next. The Customer Information page is displayed.
10 Enter your details and select one of the options under Install this application for to indicate
whether other users can use this copy of SDL Trados Freelance.
11 Click Next. The Language Selection page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 99/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
SDL TRADOS 2007 INSTALLATION GUIDE
4-1
C This page lists all languages supported by SDL Trados 2007 Suite Freelance. Select thelanguages you want to work with. You must select a minimum of two languages and amaximum of five. To select a language, select it in the Available Languages box and thenclick the right arrow to add it to the Selected Languages box. The selected languages, andtheir sublanguages will be available in the language lists of Translator’s Workbench,
WinAlign and Synergy.
NOTED
It is important to select your languages carefully as revising your selections later requires amodification to your installation.
12 Click Next. The Setup Type page is displayed.
13 Choose a setup option:
C Choose Default to install all SDL Trados 2007 Suite Freelance components to the defaultlocation. This is the recommended option. Go to step 13.
C Select Custom, only if you want to perform a component-based installation or you want tochange the location of your installation.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 100/116
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 101/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
SDL TRADOS 2007 INSTALLATION GUIDE
4-1
15 Click Next. The Ready to Install the Program page is displayed.
16 Click Install to begin the SDL Trados 2007 Suite Freelance installation.
C If you want to check or change your previous selections, click Back.
17 When SDL Trados 2007 Suite Freelance has been installed the InstallShield Wizard
Complete page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 102/116
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 103/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
SDL TRADOS 2007 INSTALLATION GUIDE
4-1
20 Read the terms of the agreement, select the I accept the terms... box and click Next.
The Destination Folder page is displayed.
21 Click Next to install SDL Trados Synergy to the default location. The Ready to Install
page is displayed.
C To select a different installation location, click the Browse button and navigate to therequired location.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 104/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
4-20SDL TRADOS 2007 INSTALLATION GUIDE
22 Click Install to begin the installation. The Installing SDL Trados Synergy page is
displayed. A status bar indicates installation progress.
23 When Synergy has been installed the Completed the SDL Trados Synergy 2007 Setup
Wizard page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 105/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
SDL TRADOS 2007 INSTALLATION GUIDE
4-2
24 Click Finish. The SDLX installer begins.
25 Click Next. The SDLX 2007 License Agreement page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 106/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
4-22SDL TRADOS 2007 INSTALLATION GUIDE
26 Accept the terms of the license and click Next. The Choose Destination Location page
is displayed. It shows where SDLX 2007 will be installed.
C To install SDLX to a different location click Browse and use the Choose Location dialog boxto select the location.
27 Click Next. The Ready to Install Program page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 107/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
SDL TRADOS 2007 INSTALLATION GUIDE
4-2
28 Click Install to begin the SDLX 2007 installation. When SDLX has been installed the
SDLX Installation Wizard Completed page is displayed
29 Click Finish. The SDL Passolo Essential installer is launched.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 108/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
4-24SDL TRADOS 2007 INSTALLATION GUIDE
30 Click Next. The Destination Location page is displayed.
C If you want to install SDL Passolo Essential to a different location, click Browse. The SelectDestination Location dialog box is displayed. Navigate to the required folder and click OK to return to the Destination Location page.
31 Click Next. The Select Components page is displayed. It lists the different items that
will be installed.
C To install all items, go to step 32.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 109/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
SDL TRADOS 2007 INSTALLATION GUIDE
4-2
C To remove an item from the list, clear the check box next to the item. To install SDLPassolo, ensure that the check box next to Program Files is selected.
32 Click Next. The Important Note page is displayed.
33 If you have a previous install of SDL Passolo Essential running on your machine, close
the application and then click Next. The Start Installation page is displayed.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 110/116
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 111/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
SDL TRADOS 2007 INSTALLATION GUIDE
4-2
35 When SDL Passolo Essential has been installed, the following page is displayed.
36 Click Finish. The product Activation Utility for SDL Trados 2007 Suite prepares to
install.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 112/116
In s ta l l i n g SDL Trados 2007 Su i t e - F ree lan ce4
4-28SDL TRADOS 2007 INSTALLATION GUIDE
37 When the activation utility has been installed the SDL Product Activation wizard is
displayed.
38 Choose an option and click Next. The options available are:
C Go to the SDL website and purchase a software license for SDL Trados 2007 Suite.
C Activate a license you have already purchased.
C Work with the software free of charge for 30 days in trial mode.
NOTEDFor more information about the Product Activation Wizard, See ”Activating your Product usingthe SDL Product Activation Wizard” on page 2-13.
39 If you chose either of the first two options you are taken to the appropriate screen and
guided through the rest of the selected process.
40 If you chose to continue with the free trial, the installation is now complete.
SDL Trados 2007 Suite Freelance and Synergy are now added to the Start menu on your desktop.
Use the Start menu to launch each component as a stand-alone application.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 113/116
Mai n ta i n i n g your SDL Trados 2007 Su i t e Free lan ce In s ta l l a t i on4
SDL TRADOS 2007 INSTALLATION GUIDE
4-2
MAINTAINING YOUR SDL TRADOS 2007SUITE FREELANCE INSTALLATION
You can modify, repair or remove your SDL Trados 2007 Suite Freelance installation at any time
using the program maintenance features available with the SDL Trados 2007 Suite Freelance
installer. These features are available on the Program Maintenance page of the installation wizard as
follows:
C Modify – use this option to add or remove components to and from your installation.
C Repair – use this option to repair or restore missing files, shortcuts or registry entries in your
installation.
C Remove – use this option to remove SDL Trados 2007 Suite Freelance software completely
from your computer.
You can access the SDL Trados 2007 Suite Freelance installation wizard and program maintenance
features through the Add or Remove Programs dialog box in the Control Panel of your computer.
NOTED
To repair or modify your SDL Trados 2007 Suite Freelance installation, you must have access tothe installer setup files in their original location.
Modifying your Installation
Use the modify feature in the SDL Trados 2007 Suite Freelance installer to add or remove
components from your current installation.
1 From the Start menu on your computer, choose Settings > Control Panel.
2 In the Control Panel, select Add or Remove Programs to open the Add or Remove Programs
dialog box.
3 In the Currently installed programs list, select SDL Trados 2007 Suite Freelance and click
Change. This starts the SDL Trados 2007 Suite Freelance installation wizard.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 114/116
Mai n ta i n i n g your SDL Trados 2007 Su i t e Free lan ce In s ta l l a t i on4
4-30SDL TRADOS 2007 INSTALLATION GUIDE
4 In the installation wizard, click Next to continue to the Program Maintenance page:
5 On the Program Maintenance page, select Modify and then Next to continue.
6 The Custom Setup page lists all the SDL Trados 2007 Suite Freelance components and
indicates which components are currently included in your installation.
C Click the plus (+) signs in the component tree to display all subfeatures.
C Select the components to add to your installation. Note that subfeatures cannot be installedindependently of their parent features.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 115/116
Mai n ta i n i n g your SDL Trados 2007 Su i t e Free lan ce In s ta l l a t i on4
SDL TRADOS 2007 INSTALLATION GUIDE
4-3
C Mark the components to remove from your installation with an X. Removing a parentfeature also removes its subfeatures.
7 Click Next to continue and proceed with the installation as outlined in the previous section.
Repairing your Installation
Use the repair feature in the SDL Trados 2007 Suite Freelance installer to repair or restore missing
files or Windows registry entries in your installation.
1 From the Start menu on your computer, choose Control Panel.
2 In the Control Panel, select Add or Remove Programs.
3 In the Currently installed programs list, select SDL Trados 2007 Suite Freelance and click
Change. This starts the SDL Trados 2007 Suite Freelance installation wizard.
4 In the installation wizard, click Next to go to the Program Maintenance page.
5 On the Program Maintenance page, select Repair and then Next to continue.
6 On the Select License Type page, select your license type. Click Next.
7 On the Ready to Repair the Program page, click Install. The installation wizard
automatically runs the repair feature. When it is complete, click Finish.
Removing SDL Trados 2007 Freelance
Use the Remove feature in the installer to remove all SDL Trados 2007 Suite Freelance files, folders
and registry entries from your computer.
The Remove option is available on the Program Maintenance screen of the SDL Trados 2007
Suite Freelance installation wizard.
8/7/2019 SDL Trados 2007 Suite - Installation Guide
http://slidepdf.com/reader/full/sdl-trados-2007-suite-installation-guide 116/116
What ’ s Nex t ?4
Access Restrictions
Access restrictions to certain SDL Trados 2007 Suite files and folders may apply to some users on
Windows Vista, Windows 2000 or Windows XP systems. The files that are most likely to be subject
to access restrictions are sample files.
Sample
The default installation location for SDL Trados 2007 sample files is:
C:\Documents and Settings\All Users\Shared Documents\SDL
Trados\Samples
This folder is accessible from the Start menu. Select: Programs > SDL International > SDL Trados
2007 Suite Freelance > Trados > Samples.
To use the sample files you must have read/write access to the Samples subfolder. Alternatively,
the sample files can be copied to a location where you do have read/write access.
The default installation location for SDL Passolo Essential sample files is:
C:\Documents and Settings\All Users\Documents\Passolo 2007\Samples
This folder is accessible from the Start menu. Select Programs > SDL Passolo 2007 > Samples.
Technical Support
For more information on technical support, please consult the online support center at
http://support.sdl.com.