Post on 02-Jun-2018
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
1/85
State Bank Of India Confidential
Page i
" Build Guide- SBI"
SCCM 2007 R2Build and Configuration Guide
System Center Configuration Manager(SCCM) 2007 R2 Deployment
Prepared for
State Bank of India Ltd.Monday, 24 January 2011
Version.1Draft
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
2/85
State Bank Of India Confidential
Page ii
" Build Guide- SBI"
Revision and Signoff Sheet
Change RecordDate Author Version Change reference
19 th January2011
Mahender .1 Initial draft for review/discussion
Reviewers
Name Version approved Position Date
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
3/85
State Bank Of India Confidential
Page iii
" Build Guide- SBI"
Table of Contents1. Introduction ............................................. .................................................. ............................ 4
1.1 Document Purpose .............................................. .................................................. ............ 4
1.2 Intended Audience .............................................. .................................................. ............ 4
2. Deploying SCCM 2007 R2........................................................ ............................................ 5 2.1 Software requirements .................................................................................... .................... 5
3. Install IIS and dot Net Framework 3.5 SP1 .............................. ............................................ 5
4. Configure WebDAV Settings for IIS .................................................. .................................... 9
5. SQL Server 2008 Installation Steps ............... .................................................. .................. 13
6. Install WSUS 3.0 SP1 ............................................. .................................................. .......... 29
7. Extend the Active Directory Schema for SCCM 2007 SP2 ................................................... 35
8. Create System Management Container ............................................................................. 35
9. Installing SCCM 2007 SP2 ....................................................................................... .......... 36
10. Configuring SCCM 2007 SP2 ......................................................... .................................. 49
a. Add Roles:- ...................................................................................................................... 51
b. Configure Client Agents .................................................................................................. 61
c. Client Installation method ..................................................................................... .......... 62
d. Manually Install SCCM Client ......................................... .................................................. 64
e. Discovery Method ................................................ .................................................. .......... 64
f. Installing agents .................................................. .................................................. .......... 67
g. Creating Collections ........................................................................................................ 69
11. Updates Deployment through SCCM 2007 .................................................. .................. 74
12.
Backup SCCM Site ............................................................... .......................................... 84
13. Troubleshooting SCCM 2007 ............................................... .......................................... 85
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
4/85
State Bank of India Confidential
1.
1.1 Document Purpose
The following document details the Installation and configuration of the System Center Configuration
Manager 2007 SP2 for State Bank of India Ltd.
1.2 Intended Audience
This document is for the use of SBIs IT System Administrators Team.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
5/85
State Bank of India Confidential
2. 200 2
SCCM requires a database used for storing configuration and logging information. Microsoft SQL
Server 2008 is the database that will be used in this Document. It will be installed on Member server. SQL Server installed and configured in SBI production environment on the same server as SCCM 2007SP2 with following Details
Hostname SCCM2007SQL Version SQL 2008 With SP1Installation Directory C:\IP Address 10.0.14.224Subnet Mask 255.255.252.0Installation Account Administrator
2.1 Software requirements
Server Software Required
SQL Server 2008 SP1 Windows 2008 with latest updates
IIS 7.0
Dot net framework 3.5 SP1
3. 3. 1
Open Server Manager and click on Features Add Features
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
6/85
State Bank of India Confidential
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
7/85
State Bank of India Confidential
In the Add feature Wizard select .Net Framework 3.5.1, Background Intelligence TransferService( BITS) and Remote Differential Compression as shown in figure and click on Next.
Click on Next in Web Server Screen
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
8/85
State Bank of India Confidential
Select Role Services as in figure above and click NEXT
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
9/85
State Bank of India Confidential
Click Close to complete the add feature wizard
.
Open IIS manager from administrative tools and browse to Default Web Site
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
10/85
State Bank of India Confidential
In the middle pane double click on WebDAV authoring Rules
In the WebDAV authoring window click on Add authoring Rule
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
11/85
State Bank of India Confidential
In Add authoring windows select the following Allow Access to All Content Allow Access to this content All UsersPermissions Read, Source, Write
Click on Ok
Click on WebDAV settings
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
12/85
State Bank of India Confidential
Change the settings as below:
Allow Anonymous Property Queries True Allow Custom Properties False Allow Property Queries with Infinite Path True Allow Hidden Files to be listed True
Click on Apply on the Actions Pane
Note : You may need to change the WebDAV settings in the config file manually if your MP does notinstall successfully
Navigate to %windir%\System32\inetsrv\config\schemaTake ownership of webdav_schema.xmlRemove the read only attributes
edit the below lines to these:
Save it and continue with SCCM.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
13/85
State Bank of India Confidential
. 200
Copy the installation files
Double click on Setup.exe After a few seconds a dialog box appears. This will disappear from the screen and then the maininstallation page appears
STEP 3 : SQL Server Installation CenterClick on the Installation hyperlink on the left hand side of the screen:
STEP 4 : SQL Server Installation CenterClick on the "New Server stand-alone installation" link on the right side of thescreen:
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
14/85
State Bank of India Confidential
The following dialog appears on the screen whilst the install program prepares for installation:
STEP 5 (optional):If any checks have failed, click on the Show details button or "View detailed report link" to find out thecause, correct it, then click on the Re-run button to perform the checks again.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
15/85
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
16/85
State Bank of India Confidential
STEP 7 : License TermsEnter the product key into the box, or choose the free edition if you're evaluating SQL Server 2008, andclick on the Next button:
Click in the "I accept the license terms" check box, then click on the Next button again.
STEP 8: Setup Support FilesThe following screen appears; click on the Install button:
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
17/85
State Bank of India Confidential
After 30 seconds or so the dialog appears again:
Setup Support RulesIf all is well, the following screen appears :
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
18/85
State Bank of India Confidential
Click on the Next button again.
STEP 10 : Feature SelectionSelect the features you want to install.
At a minimum, the following are useful, but what you need will depend on your needs:
Click on the Next button.
STEP 11 : Instance Configuration
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
19/85
State Bank of India Confidential
After a short while the following screen appears:
STEP 12 : Disk Space RequirementsThis screen just tells you if you have sufficient disk space on the drive youre installing to, and whatsgoing to be installed where.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
20/85
State Bank of India Confidential
Click on Next.STEP 13: Server ConfigurationThis step allows you to set up the service accounts that will be used to run SQL Server. If you havecreated Windows NT or Active Directory accounts for use with services, use these
We have used system account as the service account.
STEP 14: Database Engine Configuration Account ProvisionThis screen allows you to set up database engine security.
Click on Next.
STEP 15: Reporting Services ConfigurationThis screen simply asks modes of default configuration.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
21/85
State Bank of India Confidential
Select Install, but do not configure the report server
STEP 16 : Error Usage ReportingThis screen simply asks if you want to send error information to Microsoft and can safely be skipped ifyou do not want to share any information.
Click boxes if you want to help Microsoft help you.Click on Next again
STEP 17: Installation RulesThis screen simply checks if there are any processes or other installations running which will stop theinstallation of SQL Server 2008.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
22/85
State Bank of India Confidential
Click on Next again
STEP 18 : Ready to InstallThis screen summaries what you are about to install and gives you a last chance to cancel or changeanything thats wrongly configured:
STEP 19 : Installation ProgressSQL Server 2008 will now install. How long it takes depends on the speed of your machine, what loadits under, the installation media (CD is slower) and what youve chosen to install.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
23/85
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
24/85
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
25/85
State Bank of India Confidential
On the welcome screen click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
26/85
State Bank of India Confidential
Accept the license terms and click on Next
On the feature selection window click on select all and then click Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
27/85
State Bank of India Confidential
Click Next on Check file in Use window
On ready to update window click on Update
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
28/85
State Bank of India Confidential
SQL 2008 has been upgraded to SP1 click on next
Close the complete window
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
29/85
State Bank of India Confidential
. 3.0 1
Before software update point can successfully be installed and configured on a site system server inConfiguration Manager 2007, Windows Server Update Services (WSUS) 3.0 must be installed on theserver.
Note: DO NOT configure WSUS though the Configuration Wizard.
The WSUS 3.0 configuration wizard automatically starts after the Setup wizard completes. BecauseConfiguration Manager 2007 manages the WSUS settings, you should exit the configuration wizard afterit opens.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
30/85
State Bank of India Confidential
Note: while this wizard is completing it takes a long period of time to download the new version fromMicrosoft so please be patient and watch out for the window below to open and start the installation.
Click Install
Click Next
Click I accept the terms of the License agreement , and then click Next .
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
31/85
State Bank of India Confidential
Select Store updates locally , specify the path, (point it to a partition of your choice which hasenough free space to store the updates) and then click Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
32/85
State Bank of India Confidential
Click Next
If you decide to change this behavior make sure you keep a note of this as this information will berequired when we configure WSUS using SCCM.
Click Next >
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
33/85
State Bank of India Confidential
Click Next
Click Finish
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
34/85
State Bank of India Confidential
Close
DO NOT configure WSUS though the Configuration Wizard.
The WSUS 3.0 configuration wizard automatically starts after the Setup wizard completes. Because
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
35/85
State Bank of India Confidential
Configuration Manager 2007 manages the WSUS settings, you should exit the configuration wizard afterit opens.
7. Extend the Active Directory Schema for SCCM 2007 SP2
Open Command Prompt with Elevated Privileges
The Extadsch.exe is located in the bin\i386 folder of the installation media, browse through the folderand run the command
The command will extend the active directory schema to accommodate SCCM 2007 SP2
Please verify from extadsch.txt at C:\ for successful extend of AD
.
To manually create the System Management container
1. Log on as an account that has the Create All Child Objects permission on the System containerin Active Directory Domain Services.
2. Run ADSI Edit, and connect to the domain in which the site server resides.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
36/85
State Bank of India Confidential
3. Expand Domain [computer fully qualified domain name], expand , right-click CN=System , click New , and then click Object .
4. In the Create Object dialog box, select Container , and then click Next .5. In the Value field, type System Management and click Next .6. Click Finish .
Set Permissions on System Management Container
To apply permissions to the System Management container using the Active Directory Users and Computers administrative tool
1. Click Start , click Run , and then enter dsa.msc to open the Active Directory Users and Computers administrative tool.
2. Click View , and then click Advanced Features .3. Expand the System container.4. Right-click System Management . On the context menu, click Properties .5. In the System Management Properties dialog box, click the Security tab.6. Click Add to add the site server computer account and grant the account Full Control
permissions .
7. Click Advanced , select the site servers computer account, and click Edit .8. In the Apply onto list, select This object and all child objects .9. Click OK .
. 200 2
After all the Prerequisites are met we will install SCCM 2007 SP2.
Run Setup.exe from the SCCM 2007 Setup Disk
Select Configuration Manager 2007 SP2
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
37/85
State Bank of India Confidential
SCCM 2007 Sp2 setup wizard welcome screen will open up. Click on Next to start the SCCM 2007 SP2installation.
On the Available Setup Options Screen select Install a Configuration Manager Site Server and click on
Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
38/85
State Bank of India Confidential
Accept the Microsoft Software License Terms and click on Next
On Installation Settings window select Custom Settings and click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
39/85
State Bank of India Confidential
The site Type window will open. Select Primary Site and click on Next
Select if you want to participate in CEIP configuration, we have select No and click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
40/85
State Bank of India Confidential
Enter the Product Key and click Next
Select the configuration Manager installation Folder and click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
41/85
State Bank of India Confidential
On the Site Settings screen Enter Site Code as SBI and Site Name SBI Central Site - Mumbai. Pleaseenter different site Code and Site name for Secondary Sites.
Click on Next
On site Mode Select Configuration Manager Mixed Mode and click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
42/85
State Bank of India Confidential
Select the Client agents required by you. These can be modified later using site management afterinstallation also. Click on Next
On the Database server window enter the SQL server and instance name. Also Enter the ConfigurationManager Database name. We have used the default Confmgr Site Database name SMS_SBI. Click onNext
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
43/85
State Bank of India Confidential
On the SMS Provider enter the default SCCM server name and click on Next
On the Management Point screen select Install a management Point and click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
44/85
State Bank of India Confidential
Next is the Port Setting screen. Select the default port 80 and click on Next
On the Updated Prerequisite Components SCCM will require some updates. We have downloaded them
to a location. If you have not downloaded the updates then select the Check for updates and downloadthe newer version to an alternate path.
Select the latest updates have already been downloaded to an alternate path and click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
45/85
State Bank of India Confidential
Brouse for the alternate path where updates are stored
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
46/85
State Bank of India Confidential
Give the path of the updates and click on Next
On the Settings summary screen check all the settings and click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
47/85
State Bank of India Confidential
Setup will check the prerequisites for SCCM installation if it is success the click on Next
Setup will start the installation
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
48/85
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
49/85
State Bank of India Confidential
Click on Finish to finish the installation
10. Configuring SCCM 2007 SP2
Configure Boundaries:-
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
50/85
State Bank of India Confidential
Expand the Site Management until you can see the Boundaries node, right click the node and selectNew Boundary from the context menu. Right click on boundaries and select new Boundary
You can input a description, you can choose the type of network connection, be it slow or unreliable, orFast (LAN). Also the type of boundary you can choose from IP subnet, AD site names, IPv6 prefix, or IPrange.We have chosen IP subnet as the site boundary
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
51/85
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
52/85
State Bank of India Confidential
When you select the New Roles you will start a wizard that follows the theme of task sequences, you willfill out a survey of questions, followed by a summary, and then the execution of those tasks you haveselected.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
53/85
State Bank of India Confidential
On the first window, the General tab, you will see the options to use a FQDN, you must use this if youare running in native mode, the second selection is the FQDN for Internet connected clients, this isgoing to be different than your FQDN for intranet clients and is required if you are going to manageInternet based clients so they can connect to the server from outside your firewall. If you need to
specify a different account to install the server roles you would provide this as well, I am going to usethe servers computer account. The last two selections are to make the site a protected site, this meansthat only those clients that are assigned to it are the clients that will get a response from the site server,the last one is Retrieve all data from this site server, what this does is it will configure all communicationto be initiated by the site server to the site system. We will specify the FQDN for intranet connectedsystems so I input MUMHOISCCMC01.SBI.ADl, leave the protected system and retrieve data from thissite system checkboxes blank and click the Next button.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
54/85
State Bank of India Confidential
Now on to the selection of the roles to add to your system. As you can see from the list there are somenew roles as well as some classic roles. The new roles include System health validator which is part ofthe NAP, State migration point which is part of the USMT/OSD, PXE service point, Fallback status point,and Software update point. The others you should recognize, Server locator point and Reporting point.
Choose SLP, RP, SUP, and State migration point and click the Next button to continue.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
55/85
State Bank of India Confidential
This will take you into another list of sequences to configure each role individually, the first is the SLP,leave these as defaults and click on Next
Next up is RP, leave the defaults and click next.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
56/85
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
57/85
State Bank of India Confidential
On the next dialog you will need to check the box that says Use this server as the active softwareupdate point, leave the port set to 80 unless you changed this during the installation process. The SUProle should only be set on server where you want them to download all the patches, this would typicallybe your central site, where you will create the packages and then distribute them.
For the topmost site you will leave it to sync with Microsoft Update, then the sites below would syncwith it. As the server has not connection with internet select do not synchronize with internet
The next dialog allows you to set the schedule you sync your updates. Leave this at its default and clickthe Next button.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
58/85
State Bank of India Confidential
The Classifications dialog allows you to choose what class of updates you want to download, the choicesare Critical Updates, Definition Updates, Drivers, Feature Packs, Security Updates, Service Packs, Tools,Update Rollups, and Updates. You should note that if you are running a WSUS server and syncing withit, which I would not recommend the settings here will not override what you have set in WSUS serverand you may end up with updates outside of what you configure here.
Choose the following Critical Updates, Security Updates, Service Packs, Update Rollups, and Updates,and then click the next button.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
59/85
State Bank of India Confidential
The next dialog is the products you want to download updates for, choose Office, SQL, and Windowsand then click Next.
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
60/85
State Bank of India Confidential
Select the Language for the updates i.e. English and click on next
Summary window will show the Roles selected and settings for the roles verify and click on Next
Click on close on the wizard complete window
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
61/85
State Bank of India Confidential
b. Configure Client Agents
The client agents that you selected to be installed were installed with the default settings so we onlyneed to configure the agents that we want to change the defaults
Enable software metering client agent
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
62/85
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
63/85
State Bank of India Confidential
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
64/85
State Bank of India Confidential
d. Manually Install SCCM Client
The client agent can be found at \\10.0.14.224\sms_sbi\client folder. To install the agentsfollow these steps
Step1: On the client machine open c:\windows\system32\drivers\etc\hosts in the notepad andAdd the entry10.0.14.224 SCCM2007 SCCM2007.SBI.COM
Step 2: Run SCCM agent setup file ccmsetup.exe with the following switch
Ccmsetup.exe /mp:sccm2007.sbi.com /service SMSSITECODE=SBISMSSLP=SCCM2007.sbi.com
Step3: After installation of agent open control panel and check for Configuration manager iconthere for successful agent installation
e. Discovery Method
At SBI Active Directory system discovery is being used for discovering systems across AD domain
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
65/85
State Bank of India Confidential
Double click on Active Directory System Discovery under discovery Methods
Enable the Active Directory system discovery and click on new active directory container
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
66/85
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
67/85
State Bank of India Confidential
f. Installing agents
Expand the collection and Select the system on which you want to install agent
Right click on the system name and select install client
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
68/85
State Bank of India Confidential
Select include only clients in this sites boundaries
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
69/85
State Bank of India Confidential
Click on Finish
g. Creating Collections
Right click on the collections Tab and select new collection, the new clooection wizard will open asfollows
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
70/85
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
71/85
State Bank of India Confidential
In the query properties box select the criteria tab and select on new criteria
On the criterion properties go to where tab and click on select. On select attribute screen select attributeclass as Computer System and attribute as Name and click on Ok
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
72/85
State Bank of India Confidential
Select the operator and type the value. The value can be in wildcards like %del%, this query will matchall computers witch has DEL in their name attribute. Click on OK. Click OK again on query statementproperties box
Click ok on the query Rule Properties Box
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
73/85
State Bank of India Confidential
Select Next in the membership rule page
Click Next in Advertisement window
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
74/85
State Bank of India Confidential
Click Next on the Security Page and click on Finish
11. 200
To Deploy Updates using SCCM Browse through Software Updates in the left hand pane of the SCCMConfiguration Manager Console.
Browse through and select the update you want to deploy
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
75/85
State Bank of India Confidential
Right click on the update and select Deploy Software Updates, the Deploy software updates wizard willopen
Enter name for the deployment and click on the Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
76/85
State Bank of India Confidential
Select on create a new Deployment Definition and click on Next
On the collection window select the collection on which you want to deploy the software update
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
77/85
State Bank of India Confidential
Check on include members of subcollections if you want to and click on Next
On display and time settings window select Allow Display notification on clients and select client localtime. Give the duration for deadline, by default its 2 weeks
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
78/85
State Bank of India Confidential
On the restart settings window select suppress system restart on Servers and click on Next
On Event Generation Window leave defaults and click Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
79/85
State Bank of India Confidential
On Download Settings Window leave the default settings and click on Next
Give a name for the Template and save for Future use
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
80/85
State Bank of India Confidential
On the Deployment Package Window click on Create a New deployment Package and enter the Name ,Package Source and sending priority and click on Next
On the Distribution Point Window click on browse and select the Distribution point and click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
81/85
State Bank of India Confidential
On the Download Location select download software updates from the Internet and click on Next
Select the Language for the update in the language selection window and click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
82/85
State Bank of India Confidential
Specify the schedule for deployment as per above and click on Next
Verify the summary in the window and click on Next
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
83/85
State Bank of India Confidential
Click on Close after the deploy software updates wizard complete successfully
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
84/85
State Bank of India Confidential
12.
If you want to backup your SCCM site, you may make use of SCCM Site Server Maintenance Task toaccomplish this. Below are the steps to configure the SCCM Backup job:
1. In the SCCM console, navigate to System Center Configuration Manager / Site Database / Site Management / < site name > / Site Settings / Site Maintenance / Tasks .
2. Right-click the Backup Site Server task, and click Properties .
8/11/2019 Sccm 2007 Sp2 Build Guide - Sbi
85/85