Post on 21-May-2018
SERIES 2500
HEADFIXED GLASSFRAME HEADER
1
HEADFIXED GLASS - HEADDEFLECTOR/FRAME HEADER
1a
HEADFIXED GLASS - FRAMEHEADER W/ BRACKET
1b
HEADFIXED GLASS - MULLION2 POCKET W/ BRACKET
1c
HOR. MULLIONFIXED GLASS - FIXED GLASS2
HOR. MULLIONW/ BRACKETFIXED GLASS-FIXED GLASS
2a
SILLFIXED GLASSHOR. MULLION
3a
SILLFIXED GLASS - HOR. MULL.SILL BASE
3
SILLFIXED GLASSHOR. MULL. W/ BRACKET
3b
SILLFIXED GLASS - HOR. MULL.W/ BRACKET - SILL BASE
3c
SERIES 2500
HOR. MULLIONFIXED GLASS/SERIES 260 DOOR
4
HOR. TUBEFIXED GLASS/ SERIES 260 DOOR
4a
SERIES 2500
SERIES 260 DOORW/ THRESHOLD5
JAMBFIXED GLASSFRAME JAMB
6JAMBFIXED GLASS2 POCKET MULLION
6a VERT. MULLIONFIXED GLASS - FIXED GLASSO/B MULL. W/ ADAPTOR
7
VERT. MULLIONFIXED GLASS 2 POCKET MULLION
7a
JAMBFRAME JAMBSERIES 260 DOOR
8
JAMB2 POCKET MULLIONSERIES 260 DOOR
8a
SERIES 2500
VERT. MULLIONSERIES 260 DOOR 2 POCKET MULLION
9
VERT. MULLIONSERIES 260 DOOR - FIXED GLASS2 POCKET MULLION
9a
90° OUTSIDE CORNERFIXED GLASS - FIXED GLASS10
90° INSIDE CORNERFIXED GLASS - FIXED GLASS11
SERIES 2500
JAMB2 POCKET MULLIONSERIES 260 DOOR
8b
VERT. MULLIONFIXED GLASS - FIXED GLASSO/B MULL. W/ ADAPTOR
12
VERT. MULLIONFIXED GLASS - FIXED GLASS135° OUTSIDE CORNER
12a
JAMBFIXED GLASSFRAME JAMB
13
JAMBFIXED GLASS2 POCKET MULLION
13a
SERIES 2500
2500 SERIES FRAMING SYSTEMSPECIFICATION
PART 1 - GENERAL
1.1 Work IncludedFurnish labour, materials and services for thecomplete fabrication, assembly and installationof Series 2500 Framing system manufactured byCommdoor Aluminum. Work to include allnecessary accessories, anchors and sealants asrequired based on the purchase agreement.
1.2 Work ExcludedStructural steel, wood blocking or framing,interior trims, concrete masonry, final cleaning,protection, related work specified elsewhere,convector covers and trims and ceiling trims.
1.3 Quality AssuranceThe framing system supplied under thisspecification is based upon Series 2500manufactured by Commdoor Aluminum.
1.4 Shop DrawingsAll work of this section shall be executed instrict accordance with approved shopdrawings.
1.5 WarrantyThe work of this section shall be guaranteedagainst defects of materials and workmanshipfor a period of one year from date of certificateof substantial completion.
PART 2 - PRODUCTS
2.1 Material2.1.1 Aluminum Extrusion
All extruded aluminum sections to be 6063-T6 alloy or equivalent.
2.1.2 Glazing MaterialAll Extruded thermoplastic elastomersgasket.
2.1.3 FastenersFasteners shall be zinc plated.
2.2 FabricationFabrication will be carried out according to theapproved shop drawings. All joints will beassembled tight and using manufacturesprovided assembly brackets to maintain theproduct design performance.
2.3 Finish2.3.1 Anodize
Anodic Oxide Treatments are to beprocessed in accordance with AAMAdesignations.M12C22A31 class II designation is for #17Clear anodized finish (0.0004).M12C22A41 class I designation is for #14Clear Anodized finish (0.0007) and colourfinishes such as #26 light bronze, #40bronze and #29 black.
2.3.2 PaintThermosetting Acrylic Enamel coating areto be applied in accordance with AAMA603.8. Specify colour and type from PPG.Standard charts.
2.3.3 Fluoropolymer paint CoatingBased on Kynar 500 Resins are to beapplied in accordance AAMA 605.2.Specify colour from Valspar current chart.
PART 3 - EXECUTION
3.1 ProtectionAluminum shall be isolated from concrete,mortar, plaster and dissimilar materials with acoating of Bituminous paint.Exposed aluminum surface shall be protectedfrom long term contamination of mortar,concrete, paint, mud, etc.Doors and door frames shall be protected fromimpact damage by wood sheathing and plasticwraps.
3.2 InstallationCommdoor Aluminum products to be installedaccording to manufacturers instructions and inconjunction with approved shop drawings.The work shall be performed by qualifiedskilled personnel ensuring proper equipmentprovided in order to expedite the project in anefficient professional manner.
3.3 CleaningInterim and final cleaning shall be performed inaccordance with the general conditions listingmethods outlined in AAMA 609 & 610-02(2002).