Post on 28-Feb-2018
Energy BuildersImproving energy and saving environment and money
Company Profile
Energy buildersImproving energy and saving environment and money
Index&
Contact
THERMA S.p.A.Via M. Bellisario, 33 - 26020 Palazzo Pignano - (CR) - ITALIATel. +39 0373 98 30 71 - Fax +39 0373 98 29 04
Web site: www.therma.itE-mail: info@therma.it
The Company
Company Data
Workshop Facilities
Quality Control
Know How
Production Series
Special Application System
2
4
5
6
7
8
9
01|contact: therma_s.p.a.
A 25 years history made of experience.
Company Profile
TheCompany
Energy BuildersImproving energy and saving environment and money
THERMA was borne in 1981 as a spin off operation realized by family
Alberti, the owner of Officine e Fonderie di Saronno, (company borne in
1953 and operating in various activities like stove, industrial air heating,
community incinerators, industrial boilers, combustion plant) with the
name THERM.A. (like TERMICA ALBERTI) operating in the production of
high efficiency boilers.
In 1982 this company was sold to the Management and the name was
changed in THERMA maintaining his activity as a manufacturer in the
field of thermal energy production like: steam, hot water, high
temperature diathermic oils.
The standard production line of THERMA S.p.A. consists of steam
boilers (water tube type or shell type), and of hot oil boilers for the use
of the diathermic oil directly in the processes or for the indirect
production, via heat exchanger, of other hot mediums like steam or hot
water.
Principal characteristic of THERMA S.p.A. it' s to have inside the plant
and project know-how of the thermal part. This' it allows to support the
client in the phase of choice of the typology of plant and of take part to,
during the development of the project, with heavy changes also, for the
attainment of the maximum energetic and economic efficiency of the
plant.
Boiler, accessories and plant engineering are planned inside the
structure or in coordination with the suppliers of the various machineries
(CENTRAX, ELIN, HAND, JENBACHER, TUMA etc).
The acquired experience in to plants and to develop the fittings of
combustion devoted to the heat generators of our production has
allowed us to realize special and particular machines in the full respect
of the environment.
02|
Company Profile
Energy buildersImproving energy and saving environment and money
TheCompany
The special production line of THERMA S.p.A. consists of HRSG for gas
turbine or motors, of steam products, superheated water and diathermic
oil, HRSG for incineration unit.
Thermoxidizer for rendering plants.
Besides to the standard production, THERMA S.p.A. is involved in
design, production and erection of plants able to burn tail ing, tarry and
other types of production residual, and heat recovery plants.
We can also provide preliminary studies and basic designs for
combined heat and power stations, based both on gas turbines and on
steam turbines, the steam is produced by hot oil boilers and hot oil
steam exchangers.
An over 25 years - old activity and thousands of plants operating in all
different countries have enable us to rich a very good know how.
Today, THERMA S.p.A., headquarter in Palazzo Pignano - Cremona -
Italy, is a Company with more than 50 people.
Our Company is certificated according to:
- UNI EN ISO 9001:2000 ISO 9001:2000 with IIS (Istituto Italiano della
Saldatura): expiry date 17/07/2008
- EN 729: welding, joining and cutting fabrication with IIS (Istituto
Italiano della Saldatura): expiry date 16/07/2008
- GOST: for Russian market;
- ISCIR: for Romania market;
- UDT: for Poland market;
- R.I.N.A.: for marine application boiler;
- LLOYD: for marine application boiler.
THERMA built according the most important calculations code (ASME -
TRD - VSG - VSR, etc..). Under "PED" directive with CE mark and total
quality control. 03|
Our numbers
CompanyData
Company Profile
Energy buildersImproving energy and saving environment and money
Name: THERMA S.p.A.
Date: July 2006
Head Quarter: Palazzo Pignano
Area: Italy
The building
Surface Total: 5.000 sq. m.
Head Quarter overcast: 3.000 sq. m.
Workshop:
Employees
Sales Department: 8
Engineering: 8
R&D: 3
Manufactoring: 3
Administration: 6
Skilled Workers: 22
After Sales Service: 6
Electronic Equipment
PC: 30
CAD: 6
EDP: 1
04|
The facilities
Company Profile
Energy buildersImproving energy and saving environment and money
WorkshopFacilities
The manufacturing is made in one shop where the following facilities are
available:
N° 2 bridge cranes with lifting capacity up to 32 ton;
N° 1 bridge cranes with lifting capacity up to 16 ton;
N° 1 bridge cranes with lifting capacity up to 10 ton;
N° 1 electric crane;
N° 2 automatic bending machine for tubes;
N° 1 oxygen currying plant;
N° 1 oxygen cutting plant for nozzles preparation;
N° 6 electrode welding machines;
N° 4 tig welding machines;
N° 3 thread welding machines;
N° 1 MIG - MAG welding machine;
N° 1 submerged arch welding machine;
N° 2 DC welding machines;
N° 2 drying ovens for covered electrodes;
N° 1 drying ovens for welding flux;
N° 2 roll positioned;
N° 2 roll bending machines for plates of thickness up to 28 mm
N° 1 shear;
N° 1 ribbon saw;
N° 3 tube expansion machines;
N° 4 radial drilling machines;
N° 3 lathes;
N° 1 punching machine;
N° 2 ribbon hacksaw;
N° 1 cutting off machine
05|
A guaranty of success
QualityControl
Company Profile
Energy BuildersImproving energy and saving environment and money
The Quality Control Department is located in the manufacturing area in
order to allow a constant
supervision of all the production. It assures the highest quality level,
thanks to the continuous
controls and test on any incoming material and on any products to be
delivered to customers.
06|
Some steps of a long walk.
Company Profile
Energy buildersImproving energy and saving environment and money
Know How
THERMA S.p.A: is one of the leaders in Italy for the manufacturing
thermal plants thanks to the following projects
1981 THERMA manufactures the first hot oil heater with a combustion
air pre-heater, able to give a thermal efficiency higher than 90%.
1986 THERMA produces the first monobloc plant rendering the oil
heater steam exchanger in one unit package. This solution reduce in
very high quantity the amount of time and costs of piping and mounting
to be done in the customer's workshop.
1988 THERMA produces the co-generation power station gas turbine
"Cheng Cycle", simple and combined cycle. Gas Engine.
1990 THERMA produces the new steam boiler fire tube system
ENERGO 90 with economizer to pre heating the feed water to give a
thermal efficiency higher 91%.
1993 THERMA supply the first heat recovery steam generator behind
gas turbine.
1998 THERMA supply the first molten salts heater (there is only one
competitor in the word who made this type of boiler)
Between 1998 - 2005 THERMA S.p.A. produced many other hot oil
heater with capacity up to
20 MWt and many heat recovery steam or superheated water behind
gas turbine or motors.
In this period THERMA has acquired a particular specialization in the
sector of "District Heating" almost enumerating among it's Clients the
municipalized firms more important (see references list enclosed).
07|
The hearts of energy.
ProductSeries
Company Profile
Energy BuildersImproving energy and saving environment and money
Series Diaterm DTV - DTO Thermal Fluid Heater
Coil or multitubolar oil heater
Capacity from 0,5 to 23 MW
Series VT - Energo 90 / 2K Fire Tube Steam Generator
Shell Tube saturated/superheated steam
Capacity from 1 to 20 t/h
Pressure from 1 to 20 barg
Series Energo VTA Water Tube Generators
Multitubolar saturated or Superheated steam
Capacity from 6 to 60 t/h
Maximum allowed pressure up to 60 barg
Series Diaterm VTA / DA2K
Water tube Generators
Multitubolar HOT water
Capacity from 2 to 30 MW
Series Vapoterm VO Heat Exchanger
For steam and/or hot water by diathermic oil
Capacity from 1 to 30 t/h
Maximum allowed pressure 60 barg
08|
The energy for enviroment
Company Profile
Energy buildersImproving energy and saving environment and money
SpecialApplication
System
Heat recovery from industrial exhaust gases, power plants (gas turbine,
motors), incinerators etc..
Including:
Series
Waste heat recovery unit on clean or dirty gases for warm / hot water or
diathermic oil production.
Series
Thermodestroyer unit for liquid or gaseous steam, complete with
recovery unit.
Series
Waste heat recovery generator shell type for steam or hot water
production.
Series
Waste heat recovery boiler water tube type for saturated or superheated
steam production. Both for clean or dirty stream gases.
Series
Thermodestroyer with steam or diathermic fluid recovery unit
specifically developed for rendering plant
Diaterm DTOR / DTAR
DIATHERM DTT
VTR
VTAR
TDF
09|
THERMA S.p.A.
Via M. Bellisario, 3326020 Palazzo Pignano (CR)ITALIAT. +39 0373 98 30 71 F. +39 0373 98 29 04
Web site: www.therma.itE-mail: info@therma.it
Energy Bui lders