Post on 04-Jul-2020
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-412 / Imperial GrilleSpec Sheet
9.1949
MODEL: IM-412• Duct Size Dimensions: 10.00” x 2.25”• Outside Dimensions: 12.00” x 3.50”• Design Dimensions: 9.63” x 1.81”• Free Air: 81%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
9.63”
12.00”
1.81” 3.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-414 / Imperial GrilleSpec Sheet
11.3822
MODEL: IM-414• Duct Size Dimensions: 12.00” x 2.25”• Outside Dimensions: 14.00” x 3.50”• Design Dimensions: 11.63” x 1.81”• Free Air: 81%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
11.63”
14.00”
1.81” 3.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-416 / Imperial GrilleSpec Sheet
13.3745
MODEL: IM-416• Duct Size Dimensions: 14.00” x 2.25”• Outside Dimensions: 16.00” x 3.50”• Design Dimensions: 13.63” x 1.81”• Free Air: 81%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.63”
16.00”
1.81” 3.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-610 / Imperial GrilleSpec Sheet
MODEL: IM-610• Duct Size Dimensions: 8.00” x 4.00”• Outside Dimensions: 10.00” x 5.50”• Design Dimensions: 7.62” x 3.62”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
3.34
36
7.5231
7.62”
10.00”
3.62” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-612 / Imperial GrilleSpec Sheet
MODEL: IM-612• Duct Size Dimensions: 10.00” x 4.00”• Outside Dimensions: 12.00” x 5.50”• Design Dimensions: 9.63” x 3.62”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
9.1949
3.34
36
9.63”
12.00”
3.62” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-614 / Imperial GrilleSpec Sheet
MODEL: IM-614• Duct Size Dimensions: 12.00” x 4.00”• Outside Dimensions: 14.00” x 5.50”• Design Dimensions: 11.63” x 3.62”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
10.8668
3.34
36
11.63”
14.00”
3.62” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-616 / Imperial GrilleSpec Sheet
MODEL: IM-616• Duct Size Dimensions: 14.00” x 4.00”• Outside Dimensions: 16.00” x 5.50”• Design Dimensions: 13.63” x 3.62”• Free Air: 75%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.3745
3.34
36
13.63”
16.00”
3.62” 5.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-808 / Imperial GrilleSpec Sheet
MODEL: IM-808• Duct Size Dimensions: 6.00” x 6.00”• Outside Dimensions: 8.00” x 8.00”• Design Dimensions: 5.63” x 5.62”• Free Air: 74%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
5.0154
5.01
545.63”
8.00”
5.62” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-812 / Imperial GrilleSpec Sheet
MODEL: IM-812• Duct Size Dimensions: 10.00” x 6.00”• Outside Dimensions: 12.00” x 8.00”• Design Dimensions: 9.63” x 5.63”• Free Air: 74%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
9.1949
5.01
54
9.63”
12.00”
5.63” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-814 / Imperial GrilleSpec Sheet
MODEL: IM-814• Duct Size Dimensions: 12.00” x 6.00”• Outside Dimensions: 14.00” x 8.00”• Design Dimensions: 11.63” x 5.63”• Free Air: 74%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
10.8668
5.01
54
11.63”
14.00”
5.63” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-816 / Imperial GrilleSpec Sheet
MODEL: IM-816• Duct Size Dimensions: 14.00” x 6.00”• Outside Dimensions: 16.00” x 8.00”• Design Dimensions: 13.63” x 5.62”• Free Air: 74%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.3745
5.01
54
13.63”
16.00”
5.62” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-824 / Imperial GrilleSpec Sheet
MODEL: IM-824• Duct Size Dimensions: 22.00” x 6.00”• Outside Dimensions: 24.00” x 8.00”• Design Dimensions: 21.45” x 5.62”• Free Air: 74%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
20.8976
5.01
54
21.45”
24.00”
5.62” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-826 / Imperial GrilleSpec Sheet
MODEL: IM-826• Duct Size Dimensions: 24.00” x 6.00”• Outside Dimensions: 26.00” x 8.00”• Design Dimensions: 23.63” x 5.62”• Free Air: 74%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
23.4053
5.01
54
23.63”
26.00”
5.62” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-832 / Imperial GrilleSpec Sheet
MODEL: IM-832• Duct Size Dimensions: 30.00” x 6.00”• Outside Dimensions: 32.00” x 8.00”• Design Dimensions: 29.63” x 5.62”• Free Air: 74%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
29.2566
5.01
54
29.63”
32.00”
5.62” 8.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1010 / Imperial GrilleSpec Sheet
MODEL: IM-1010• Duct Size Dimensions: 8.00” x 8.00”• Outside Dimensions: 10.00” x 10.00”• Design Dimensions: 7.63” x 7.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
7.5221
7.52
317.63”
10.00”
7.63” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1012 / Imperial GrilleSpec Sheet
MODEL: IM-1012• Duct Size Dimensions: 10.00” x 8.00”• Outside Dimensions: 12.00” x 10.00”• Design Dimensions: 9.63” x 7.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
9.1949
7.52
319.63”
12.00”
7.63” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1014 / Imperial GrilleSpec Sheet
MODEL: IM-1014• Duct Size Dimensions: 12.00” x 8.00”• Outside Dimensions: 14.00” x 10.00”• Design Dimensions: 11.63” x 7.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
10.8668
7.52
31
11.63”
14.00”
7.63” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1016 / Imperial GrilleSpec Sheet
MODEL: IM-1016• Duct Size Dimensions: 14.00” x 8.00”• Outside Dimensions: 16.00” x 10.00”• Design Dimensions: 13.63” x 7.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.3745
7.52
31
13.63”
16.00”
7.63” 10.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1212 / Imperial GrilleSpec Sheet
MODEL: IM-1212• Duct Size Dimensions: 10.00” x 10.00”• Outside Dimensions: 12.00” x 12.00”• Design Dimensions: 9.63” x 9.63”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
9.1949
9.19
499.63”
12.00”
9.63” 12.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1214 / Imperial GrilleSpec Sheet
MODEL: IM-1214• Duct Size Dimensions: 12.00” x 10.00”• Outside Dimensions: 14.00” x 12.00”• Design Dimensions: 11.56” x 9.62”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
10.8668
9.19
4911.56”
14.00”
9.62” 12.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1216 / Imperial GrilleSpec Sheet
MODEL: IM-1216• Duct Size Dimensions: 14.00” x 10.00”• Outside Dimensions: 16.00” x 12.00”• Design Dimensions: 13.63” x 9.62”• Free Air: 69%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.3745
9.19
49
13.63”
16.00”
9.62” 12.00”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1414 / Imperial GrilleSpec Sheet
MODEL: IM-1414• Duct Size Dimensions: 12.00” x 12.00”• Outside Dimensions: 14.50” x 14.50”• Design Dimensions: 11.62” x 11.63”• Free Air: 68%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
10.8668
10.866
811.62”
14.50”
11.63” 14.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1416 / Imperial GrilleSpec Sheet
MODEL: IM-1416• Duct Size Dimensions: 14.00” x 12.00”• Outside Dimensions: 16.50” x 14.50”• Design Dimensions: 13.62” x 11.63”• Free Air: 68%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.3745
10.866
813.62”
16.50”
11.63” 14.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1426 / Imperial GrilleSpec Sheet
MODEL: IM-1426• Duct Size Dimensions: 24.00” x 12.00”• Outside Dimensions: 26.50” x 14.50”• Design Dimensions: 23.50” x 11.63”• Free Air: 68%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
23.4053
10.866
8
23.50”
26.50”
11.63” 14.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1616 / Imperial GrilleSpec Sheet
MODEL: IM-1616• Duct Size Dimensions: 14.00” x 14.00”• Outside Dimensions: 16.50” x 16.50”• Design Dimensions: 13.63” x 13.63”• Free Air: 65%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
13.3745
13.374
513.63”
16.50”
13.63” 16.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-1620 / Imperial GrilleSpec Sheet
MODEL: IM-1620• Duct Size Dimensions: 18.00” x 14.00”• Outside Dimensions: 20.50” x 16.63”• Design Dimensions: 17.63” x 13.63”• Free Air: 65%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
17.5540
13.374
5
17.63”
20.50”
13.63” 16.63”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-2020 / Imperial GrilleSpec Sheet
MODEL: IM-2020• Duct Size Dimensions: 18.00” x 18.00”• Outside Dimensions: 20.50” x 20.50”• Design Dimensions: 17.63” x 17.49”• Free Air: 61%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
17.5540
17.554
0
17.63”
20.50”
17.49” 20.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-2032 / Imperial GrilleSpec Sheet
MODEL: IM-2032• Duct Size Dimensions: 30.00” x 18.00”• Outside Dimensions: 32.50” x 20.50”• Design Dimensions: 29.63” x 17.63”• Free Air: 61%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
29.2566
17.554
0
29.63”
32.50”
17.63” 20.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-2222 / Imperial GrilleSpec Sheet
MODEL: IM-2222• Duct Size Dimensions: 20.00” x 20.00”• Outside Dimensions: 22.50” x 22.50”• Design Dimensions: 19.23” x 19.23”• Free Air: 59%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
19.2258
19.225
8
19.23”
22.50”
19.23” 22.50”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-2626 / Imperial GrilleSpec Sheet
MODEL: IM-2626• Duct Size Dimensions: 24.00” x 24.00”• Outside Dimensions: 26.50” x 26.50”• Design Dimensions: 23.28” x 23.63”• Free Air: 58%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
23.4053
23.405
3
23.28”
26.45”
23.63” 26.45”
1.800.880.3090 www.reggioregister.com 31 Jytek Road, Leominster, MA 01453
JOB NAME:LOCATION:ARCHITECT:ENGINEER:CONTRACTOR:
SUBMITTED BY:
IM-3232 / Imperial GrilleSpec Sheet
MODEL: IM-3232• Duct Size Dimensions: 29.63” x 29.63”• Outside Dimensions: 32.00” x 32.00”• Design Dimensions: 28.63” x 28.63”• Free Air: 56%• Made in USA
OPTIONS:• Material: Aluminum Steel• Thickness: 1⁄8” 3⁄16” ¼ ”• Finish: Black Grey Silver
Sun Gold White Oil-Rubbed Bronze• With Holes (as shown)
No Holes (cross out holes on drawing)
• Underside Lip No Underside Lip• With Louver Without Louver
NOTES: • Pattern scale subject to change with size of grille• Wall and Ceiling Installation: requires Holes/screws• Floor Installation:
• Requires Underside Lip when you choose No Holes
• Thickness 1⁄8” not recommended
• Aluminum available in 3⁄16” only
29.2566
29.256
6
28.63”
32.00”
28.63” 32.00”