ELECTRONICS

• 250mm ARF FPV Racer

• White Gel Coat carbon fiber frame

• Clear polycarbonate, nearly indestructible risers in place of traditional nylon or aluminum standoffs

• Easy to replace carbon fiber arms

• Extremely durable SMA connector for attaching antennas which lowers the chances of damaging the video transmitter and allows quick and easy installation and removal of the antenna

• Durable nylon fiberglass blend 5 in. props

• Max flight time: dependent upon props

• Max speed: 75+ mph

MECHANICAL

• STMF4 Flight Controller running RaceFlight/Betaflight

• Flight camera: CCD, Wide Dynamic Range

• Integrated clean power regulation

• Integrated power distribution

• 52 bright, addressable RDB LEDs, diffused through polycarbonate risers

• Removable flight controller/OSD

• Recommended battery: 3S or 4S Lipo

• Multishot enabled 20Amp XM20 Speed Controller

• Thrust UAV tuned race motors

SOFTWARE FEATURES

• Modular Integrated Flight System with on-screen display (battery voltage, battery capacity, video frequency)

• Control video channels, frequency and power output via radio transmitter using the on-screen display

• Integrated flight system comes pre-configured (plug and play)

• Compatible with PPM, SBUS, XBUS, Spectrum R/C systems

• Fully configurable via OSD, no PC required

• ESC beeps when inactive for 5 minutes and can be used in a lost model situation

• Configuration app: Raceflight/Betaflight

SPECIFICATIONS

INTRODUCINGTHE ALL-NEW

INTRODUCINGTHE ALL-NEW

www.riotpro.eu

For more information, visit: www.riotpro.eu