Post on 09-Sep-2018
CONTENTS
Introduction
Background
Literature Review
Optimization Objectives
Proposed Methodology
Expected Outcomes
Discussion on Results
Conclusion
Reference
SYNOPSIS
In this presentation, you will learn how the GSM network planning is done.
Drive testing to gather radio statistics
Analyze the network performance
Proposed solutions to resolve issue or meet KPI benchmark
MOTIVATION
Challenging area of research
Comprehensive knowledge on the subject
Day-to-day learning
LITERATURE REVIEW
Site survey
Capacity
Coverage
Frequency
interference
Parameter
design
Implementation
Optimization
Evaluate
Planning Optimization
PLANNING & OPTIMIZATION RELATIONSHIP
PLANNING NETWORK EVALUATION PATH
1. Basic coverage deployment
2. The first capacity extensions and coverage enhancement deployment (indoor coverage)
3. Intelligent capacity enhancement deployment with strong indoor coverage improvement
4. Base station coverage area splitting/microcellular/dual band deployment, to further improve coverage/capacity/quality
PLANNING STEPS
Coverage
Capacity
Site survey
Frequency
Interference
Propagation
Neighbor cell
Coverage
LAC
Channel
Parameter
E-map
DATA COLLECTION
Data of network plan
Network basic information collection
The base of network plan and optimization
The engineering survey data of new sites
Confirm the network plan information.
The Engineering data of the current network
Understand the current network .
The configuration NMS data.
Understand the current network configuration. Collection of various performance reports of the currently deployed network.
Subscribers’ complain
The supplement information showing the
network quality.
Let’s begin!
RF OPTIMIZATION
Optimization
Quality
Cost Resources
OPTIMIZATION OBJECTIVES
Finding and correcting any existing problems after site implementation and integration.
Meeting the network quality criteria agreed in the contract.
Optimization will be continuous and iterative process of improving overall network quality.
Optimization can not reduce the performance of the rest of the network.
Area of interest is divided in smaller areas called clusters to make optimization and follow up processes easier to handle.
PROPOSED METHODOLOGY
Problem Analysis
Conduct Drive testing
Gather statistics
Subject to investigage (Faulty TRX, Coverage overlaps, drop calls, capacity & interference issues)
Simulate real-time scenario on TEMS (after DT)
Export into MAPInfo to check cell overshoot coverage, etc
Propose solution
EXPECTED OUTCOMES
Good signal coverage at macro and micro sites
Rx Quality level should be good
No interference issue
DISCUSSION ON RESULTS
INTERNATIONAL ARRIVAL LOUNGE RXLEVEL IDLE
INTERNATIONAL ARRIVAL LOUNGE CELL ID IDLE MODE
INTERNATIONAL ARRIVAL LOUNGE RX-QUALITY
AVARI RXLEVEL IDLE
AVARI CELL ID IDLE MODE
AVARI RX-QUALITY
MOBILE MARKET SADDAR (9574) RXLEVEL IDLE
MOBILE MARKET SADDAR (9574) CELL ID IDLE MODE
MOBILE MARKET SADDAR (9574) RX QUALITY
MAPINFO SNAPSHOTS
MAPINFO SNAPSHOTS