1 hrs

1 pcs

f

0.20 mm

k

0.40 mm

h

PLA

10 g

d

MK3/S

Print Files (.gcode) DOWNLOAD ALL FILES

Summary

This little snap-together reindeer is a perfect give away or present forchristmas. It's very easy to print and looks quite good.

I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535

Seasonal designs > Winter & Christmas & New Year's

snaptogether reindeer christmasdecorations

christmasdecoration christmas

I printed this model in Prusament PLA Lipstick Red. I used the "0.2 SPEEDMK3" settings in Prusa Slicer and the result with these settings looks prettygood.

S Seppo

Reindeer ChristmasCard Snap-TogetherReindeer

VIEW IN BROWSER

updated 14. 11. 2019 | published 14. 11. 2019

1.5 MB

0.90 hrs f 0.20 mm k 0.40 mm h PLA 10.40 g d MK3/S

updated 12. 11. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

1.4 MBupdated 12. 11. 2019

306.3 KBupdated 12. 11. 2019

Find source .stl files on Thingiverse.com

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

reindeercard.gcode

reindeer_card_reorganized.stl

reindeercard.3mf