Post on 07-Feb-2018
- 1 -
Microswift CCTV Singapore Your Vision - Our Mission
www.cctv-sg.com Support Line: 6853 9617
Quick User Guide for x11z-series Standalone CCTV DVR
Content ▪ PART I – Using Remote Login Program Page 2 ▪ PART II - Using Internet Explorer ActiveX Viewer Page 4
▪ PART III - Using the Remote Control Page 5
MicroSwift CCTV Singapore
© Copyright 2010. MicroSwift Network Services
- 2 -
PART I - Using Remote Login Program - DVRemoteDesktop.exe 1) Download “DVRemoteDesktop.exe” from http://cctv-sg.com/icatch.html or copy from the CD provided. You can also
download “DVRemoteDesktop.exe” from your Internet login address or use IE ActiveX to perform remote login. 2) Run “DVRemoteDesktop.exe” and login with the Address, Port, Username & Password provided. If you are
connecting over the internet, it may take 30-60 seconds for the connection to establish.
3) Main display screen functions as follows.
4) Right click on screen to bring up the System Menu. “Playback Search” & “Backup” are most commonly used.
Download “DVRemoteDesktop.exe” Use IE ActiveX
for Remote Login
Change between high and low quality video stream. High quality may result in low video frame rate if connection is not fast enough.
Full screen mode
Record current video Path settings for
video record and snapshot
Snapshot
Minimize Icons
Recording in progress icon
Audio mute / un-mute icon
Hard Disk free space indicator, 0% - empty, 100% - full
Double-click on any camera to enter 1 screen mode. Double-click again to go back to 4-screen mode.
Current Date / Time
Video Date / Time
End program
- 3 -
**NOTE** : To change admin & users password, go to “Setup” � “Main Menu” � “Account Setup”.
5) Time Search Playback – Enter Date/Time or use mouse to hold and drag red cursor to select time. Click “Ok” to
playback. During playback, use playback control buttons to forward or rewind video. Maximum forward/rewind speed is 64x, press “Play” button to resume normal speed playback, press “Stop” button to stop playback and go back to live mode.
6) Backup – Use to extract portion of important video for safe keeping purpose. In remote login mode, backup videos are
stored to the PC/laptop used for remote login. When doing backup at DVR main display screen, backup videos are stored to root folder of a Thumb Drive which must be inserted before running backup.
Setup
Turn On/Off recording
Playback last hour recording
Display modes/ Lock display
1 screen mode
4 screen mode
Main Menu
Playback Search
• Select Time Search and enter Date/Time to playback.
• Select Event Search to playback by event.
Backup
• Use backup to transfer selected portion of the recorded video.
.
PTZ (Pan,Tilt,Zoom) Camera controls
Red Cursor Playback Control Buttons
Step 1 – Select start time
Step 2 – Select end time
Cick “Refresh” to change or select file name.
Step 3 – Click “Calculate” to see file size
Step 4 – Click “Start” to perform backup
- 4 -
7) Playback Extracted Video Files – Backup files are in .irf format. To playback .irf files, locate the IRFplayer program “ifileplaypack.exe” in the CD provided and copy to any location on your PC. You can also download “ifileplaypack.exe” from http://cctv-sg.com/icatch.html. Click “Open” button and select the backup file to playback.
To convert .IRF files to .AVI files, use IRFtoAVI converter program “Irftool.exe” found in the CD provided.
PART II - Using Internet Explorer ActiveX Viewer 1) To perform remote login with Internet Explorer, go to the provide login address (e.g. http://testing.i-dvr.net:81) and login
with your username and password. Click on “Internet Explorer 6,7,8”. If you are viewing for the first time, you will be asked to install an ActiveX component, click “Install ActiveX Control” to install. Click “Ok” or “Install” if any confirmation prompt pops up.
IMPORTANT – If ActiveX control cannot be installed successfully, please change the following settings to allow installation of unsigned activeX. a) In Internet Explorer and go to “Tools” � “Internet Options”. Under “Security” tab, click on “Internet” then click
on “Custom Level” button. b) Look for “Download unsigned ActiveX controls” and change setting to “Prompt”. Then click “OK” button. Click
“Yes” when prompted for confirmation. Close Internet Explorer and start Internet Explorer again and repeat step 1.
Open and select backup file to playback
Click to start ActiveX Viewer
- 5 -
PART III - Using the Remote Control
REC Start / Stop recording
LOCK Lock system to prevent unauthorized usage
1 / 2 / 3 / 4 Enter full screen mode for camera 1, 2, 3 or 4
MENU Display system main menu
PLAY Instant playback last hour recordings
ESC Cancel or Exit
BK-UP Perform video backup / transfer. Please insert USB Thumb drive first before doing backup.
T-SRH Time or Event Playback Search
Enter 4 sreen mode
UP / DOWN / LEFT / RIGHT For menu navigation in Live mode. For playback control in playback mode.
ENTER Confirm or Select