Post on 14-Nov-2018
PROMOTION ORGANIZATION
http://www.abcm.org.br/
http://www.pucpr.br/
SPONSORS
http://www.zeiss.com.br/
http://www.vtech-br.com/
https://www.eos.info/en
institutorenault.com.br/
http://www.iscardobrasil.com.br/
https://www.home.sandvik/
https://www.bksv.com/
https://www.tescan.com/
embraer.com/
http://www.capes.gov.br/
http://www.cnpq.br
SPONSOR ACKNOWLEDGEMENTS
1
Welcome to Curitiba
Dear Colleagues,
It is with the great pleasure that we welcome you to
Curitiba and the 24th ABCM International Congress of
Mechanical Engineering - COBEM, held from 3-8
December 2017, at the Pontifícia Universidade Católica
do Paraná, Curitiba, PR, Brazil.
COBEM is a comprehensive event, organized every 2
years, which gathers students, engineers and scientists
of many different fields that contribute for the
advances in mechanical engineering and related
fields. People from around world are welcome to
participate in the 24th edition of the congress, to
discuss important issues such as sustainability, new
manufacturing approaches, thermal and fluid
sciences, numerical modeling among others
important subjects. The occasion constitutes an
excellent opportunity for the interaction of the
Brazilian community with a selected group of
internationally leading scientists. Besides, the meeting
also provides students, at early career stage, the
privilege of presenting and discussing their works with
first-rated scientists. The aim is to provide a relaxed
atmosphere to facilitate networking among
participants and foster possible future collaborations.
The scientific program contemplates the most diverse
areas of fundamental and applied mechanical
engineering. The Congress is divided in 21 Symposia,
which include 12 invited oral contributions, 921 regular
oral contributions and 581 posters.
On behalf of the Organizing Committee, we would like
to thank the intended participants and all of those
who have contributed to the organization and success
of this event. We wish you all a very prosperous and
inspiring Conference and hope that we have made
your time in Curitiba the most worthy and personal
experience for you and your colleagues.
24th COBEM Organizing Committee
Ricardo D. Torres
Congress Chair
PUCPR
Fred L. Amorim
Congress Vice-Chair
PUCPR
Stephan H. Och
Treasurer
PUCPR
Paulo Soares
Program Chair
PUCPR
ABCM Board of Directors 2015 - 2017
Professor Sergio Viçosa Möller, UFRGS – President
Professor Luís Mauro Moura, PUCPR – Vice-President
Professor João Luiz Filgueiras de Azevedo,
DCTA/IAE/ALA – Scientific Technical Director
Professor Gherhardt Ribatski, USP-SC - Secretary
Director
Professor Leonardo Santos de Brito Alves, UFF –
Treasurer Director
LOCAL COMMITTEE WELCOME
2
AERO - Aerospace Engineering
Carlos A. H. Laurindo - carlos.laurindo@pucpr.br
Marcelo Leite Ribeiro - malribei@usp.br
William Wolf - wolf@fem.unicamp.br
BIOE - Bioengineering
Adriano Siqueira - siqueira@sc.usp.br
Paulo Soares - pa.soares@pucpr.br
Rudolf Huebner - rudolf@demec.ufmg.br
Ana Paula R. Alves Claro - rosifini@feg.unesp.br
COMB - Combustion and Environmental
Engineering
Rogério Gonçalves dos Santos - roger7@fem.unicamp.br
Stephan Henning Och - stephan.och@pucpr.br
DYNM - Dynamics, Control, Vibrations and
Acoustics
Aline Souza de Paula - alinedepaula@unb.br
Key Fonseca de Lima – key.lima@pucpr.br
Marcelo Amorim Savi - savi@macanica.coppe.ufrj.br
Nilson Barbieri - nilson.barbieri@pucpr.br
ENACEM - Education Symposium Carlos Alberto de Almeida - calmeida@puc-rio.br
Luís Mauro Moura - luis.moura@pucpr.br
ENTS - Energy and Thermal Sciences
Leandro Alcoforado Sphaier - lasphaier@id.uff.br
Luis Mauro Moura - luis.moura@pucpr.br
Viviana C. Mariani - viviana.mariani@pucpr.br
FIVB - Flow Induced Vibration Luis Mauro Moura - luis.moura@pucpr.br
FLMR - Fluid Mechanics and Rheology Marcelo Souza de Castro - mcastro@fem.unicamp.br
FRFS -Fracture, Fatigue, and Structural Integrity Hsu Yang Shang - hsu.shang@pucpr.br
HVAC - Heating, Ventilation, Air-Conditioning
and Refrigeration
Enio Pedone Bandarra Filho - bandarra@ufu.br
Luis César de Carli Turco - luis.turco@pucpr.br
Nathan Mendes - nathan.mendes@pucpr.br
MMEN - Materials and Manufacturing
Engineering
Álisson Rocha Machado - alisson.rocha@pucpr.br
Fred Lacerda Amorim – fred.amorim@pucpr.br
Valter Estevão Beal - valtereb@fieb.org.br
Carlos M. Lepienski - lipnano@gmail.com
Giovanni Santos - giovanni.rocha@yahoo.com
MECH - Mechanics and Automation
Luciano Mendes - l.mendes@pucpr.br
Marcelo Rudek - marcelo.rudek@pucpr.br
Sadek Absi Alfaro - sadek@unb.br
NMMS - Nano and Microfluidic and Micro-
Systems
Elaine Maria Cardoso- elainemaria@dem.feis.unesp.br
Paulo C. Philippi - paulo.philippi@pucpr.br
ICONNE - Non–linear Phenomena José Manoel Balthazar - jmbaltha@rc.unesp.br
NUCE - Nuclear Engineering Irionson Bassani - irionson.bassani@pucpr.br
OSPE - Offshore and Petroleum Engineering Celso Pupo Pesce - ceppesce@usp.br
Celso Peres Fernandes - celso@lmpt.ufsc.br
PIPV - Pipping and Pressure Vessels Ricardo Bertin - ricardo.bertin@pucpr.br
PROD - Product Engineering Fernando Antonio Forcellini - forcellini@deps.ufsc.br
Luciano Mendes - l.mendes@pucpr.br
QUSM - Quantification of Uncertainties and
Stochastic Modelling
Adriano Todorovic Fabro - fabro@unb.br
Alberto C. G. C. Diniz - adiniz@unb.br
Marcela Rodrigues Machado - marcelahippie@gmail.com
Roberta Lima - roberta_10_lima@hotmail.com
Rubens Sampaio Filho - rubens_sampaio@icloud.com
SMST - Smart Materials and Structures
Alberto Paiva - paiva.ufrj@gmail.com
Marcelo Amorim Savi - savi@mecanica.coppe.ufrj.br
Michelle S. Merúvia - michelle.meruvia@pucpr.br
SOLM - Solid Mechanics
Eduardo Fancello - eduardo.fancello@ufsc.br
João Elias abdalla Filho - joao.abdalla@pucpr.br
Márcio Lúcio Bittencourt - mlb@fem.unicamp.br
SYMPOSIA COORDINATORS
3
Plenary Speaker – Sunday, Dec 2 – 19:30 Hans Jürgen Herrmann (ETH – Switzerland)
Bursts in the permeability of particle-laden flows through porous media
Hans Jürgen Herrmann is theoretical physicist and Full Professor at ETH, Zuriche since
2006. In 1990 he was head of the many-body group at the High Performance Computing
Center of Jülich for four years. Then he was director of the Laboratoire de Physique et
Mécanique des Milieux Heterogenes de l’ École Supérieure de Physique et de Chimie
Industrielles de Paris (ESPCI), for six years, where he also filled a chair. In 1996, he was
named full professor and director of the Institute of Computer Physics at the University
of Stuttgart. His research on the numerical simulation of particulate systems includes the study of fractures of
disordered materials, the effect of wind in dunes, appolonian packings, density waves in pipe flow, fragmentation,
stratification, segregation, compactification, sedimentation and non-linear elasticity of packings. He is member
of the Brazilian Academy of Science, a Guggenheim Fellow (1986), Max-Planck prize recipient (2002) and won the
2005 Gentner-Kastler prize. He is managing editor of International ‘Journal of Modern Physics C’ and of ‘Granular
Matter’ and member of several editorial boards and committees including the Research Committee
(Forschungskommission) of ETH. He has authored/co-authored about 400 publications and co-edited 13 books.
Invited Lectures MON / 4
8:30 – 9:10
ROOM 4
Carolina Palma Naveira Cotta (Universidade Federal do Rio de Janeiro – Brazil)
Experimental and Inverse Analysis of Micro-reactors for Biodiesel Synthesis Integrated with
Micro-heat Exchangers for Reuse of Waste Heat
THU / 7
8:30 – 9:10
ROOM AUD4
Emmanuel Ezugwu (Air Force Institute of Technology – Nigeria)
Innovative Perspective in the Development and Processing of Difficult-to-Cut Alloys for
Manufacturing activities
THU / 7
8:30 – 9:10
ROOM 9
Henrique Rozenfeld (Universidade de São Paulo – Brazil)
Servitization Methodology: A case of a Medical Equipment Manufacturer From Product
Offering to Service Provider
MON / 4
8:30 – 9:10
ROOM AUD3
Hidetoshi Fujii (Osaka University – Japan)
Latest Welding for High Strength and Toughness - Friction Stir Welding of Steels without
Transformation
MON / 4
8:30 – 9:10
ROOM 2
Jeremy Gilbert (Clemson University – USA)
A Multi-Physics Approach to Tribocorrosion Studies of Metallic Biomaterials
MON / 4
8:30 – 9:10
ROOM 8
José Alfredo Ferrari Jr (Shell/Brazil)
Reducing Life-Cycle Costs and Improving the Energy Efficiency of Large Floating Production
Platforms
WED / 6
8:30 – 9:10
ROOM 6
José L. Lage (Southern Methodist University – USA)
Sweeping Convection: A New Convection Mode by Large Particles
MON / 4
13:30 – 14:10
ROOM 2
Ketul Popat (Colorado State University – USA)
Superhydrophobic Surfaces for Blood Contacting Medical Devices
TUE / 5
8:30 – 9:10
ROOM 9
Mohammad I. Younis (State University of New York at Binghamton – USA)
Nonlinear Dynamics of Micro and Nano Systems for Superior Devices
WED / 6
8:30 – 9:10
ROOM AUD3
Vicente Massaroti (VTECH- Brazil)
Optical Metrology Applied on the 4.0 Industry – State of Art and Future Applications and
Development
THU / 7
8:30 – 9:10
ROOM AUD2
Zahid Ayub (Isotherm Inc – USA)
Current refrigerant landscape in the context of Kigali 2016 agreement and the potential role
of natural refrigerants
INVITED SPEAKERS
4
Certificate of Presentation / Attendance
A digital Certificate of Attendance or Presentation will be issued to all participants of the Congress. You will receive a
login and password to download the certificate.
Emergency / First Aid
For any medical emergency, please dial (41) 3271-1550 / Cell: (41) 9.9911-7862, (Mon to Fri – 7 to 23h, Sat 7 to 18h). Any
other emergency (Mon – Sun), dial (41) 3271-1200.
More information at: https://www.pucpr.br/vida-no-campus/servicos/urgencias-e-emergencias/
Information
If you require any assistance during the Congress, please call (41) 3271-1385 and ask for the Secretary desk. The
Secretary desk is located in the registration area and is in service for the entire duration of the event.
Language
English is the official language of the Symposium. Therefore, the program will be presented in English.
Wireless Internet
Wireless Internet is available and can be accessed anywhere at PUCPR (access Visitantes network).
Parking
Parking lot rates (access from gates 1, 2 and 3):
• Flat rate for the whole day: R$10 (COBEM attendants only)
All prices are in Brazilian Reais and subject to change without notice.
More information: https://www.pucpr.br/vida-no-campus/servicos/estacionamento/cobrancas-e-formas-de-
pagamento/
Lunch
Several options inside campus and around campus.
Please, check the options inside campus at: https://www.pucpr.br/vida-no-
campus/servicos/##
There are several restaurants at walking distance from campus. Please check the map and
restaurant description/prices at:
https://www.google.com/maps/d/edit?mid=1FUNjFq9UxT9pF9ISXMpfqlOPvyc&ll=-
25.453290580082125%2C-49.255738738169384&z=21
Registration
The registration desk will be in operation during these hours:
Sunday, December 2, 13:30-18:30
Monday to Friday, December 3 - 8, 07:30-8:30
Congress Dinner
We invite you to experience top authentic Brazilian culinary delights and other typical Brazilian specialties like caipirinhas
on “Botecaria do COBEM”. The essential meaning of Boteco is that it’s a place where you go for delicious food, lots of
drinks, good music and hang out with friends.
Make sure to confirm your participation in this activity at the Secretary Desk. Buy your ticket in advance, sold in limited
number due to limited space. Price is R$35/person all-you-can-eat.
This event will take place at Le Dani Restaurant, located at Av. Pres. Kennedy, 2511 - Água Verde, about 4 km from
PUCPR (~15 min driving). Bus line 216.
COBEM 2017 – CONGRESS INFORMATION
Restaurants around
campus
5
ROOM LOCATIONS:
1
Bloco Verde (Building 3)
Registration Desk
Exhibit and Poster hall
Restaurant
AUDITÓRIO.3 - MÁRIO DE ABREU
AUDITÓRIO.4 - CARLOS COSTA
AUDITÓRIO.5 - GREGOR MENDEL
2 Library
AUDITÓRIO 1 - JONH HENRY
AUDITÓRIO 2 - BLAISE PASCAL
3 Bloco Laranja (Building 4)
Rooms 300 to 309 (3rd floor)
Restaurant
4
Bloco Azul (Building 2)
Theatre (TUCA) – Opening cerimony and welcome coktail
Food court
Printing services
5 Building 9 (Mechanical Engineering department)
6 Portal (main entrance)
COBEM 2017 – CONGRESS INFORMATION GENERAL INFORMATION – ROOM LOCATIONS
6
About Curitiba
Curitiba (Tupi: “Pine Nut Land”) is the capital and
largest city of the Brazilian state of Paraná and one of
the most prosperous and organized cities in Brazil.
The city’s population numbered approximately
1,879,355 people as of 2015, making it the eighth most
populous city in the country, and the largest in Brazil’s
South Region.
There are many exciting things to do in Curitiba. From
historical sites to cultural attractions, explore the
exhaustive list of all other local attractions in Curitiba.
Best things to do in Curitiba and nearby areas, top
attractions to visit such as historical monuments,
natural attractions, adventurous and entertainment
activities to do, places to eat and drink.
More information:
– www.curitiba.pr.gov.br/idioma/ingles
– www.curitibacvb.com.br/page/attractions-curitiba-
and-around
– www.triphobo.com/places/curitiba-brazil/things-
to-do
– www.turismo.curitiba.pr.gov.br/categoria/atrativos
-turisticos/3
– traveltoparana.wordpress.com/2010/03/17/inspirin
g-curitiba-20-photos-that-will-make-you-want-
to-visit-curitiba-parana-brazil/
Useful local Information
Weather
In Curitiba, the month of December is characterized
by hot days and mild nights. Usually daily highs are
around 23 °C (74 °F), rarely exceeding 27 °C (81 °F) or
dropping below 13 °C (56°F). The month of December
in Curitiba experiences afternoon rain (typical of
summer season), so there is a good chance of a wet
day. Bring your umbrella.
Time difference
GMT - 3 hours
Currency
The Brazilian Real is the national currency (R$). The ask
and bid rate for both the USD and the Euro are shown
on the Central Bank of Brazil’s website
(https://www.bcb.gov.br/en/#!/home) at the right-
hand column. As of November 03, 2017, USD 1.00
equaled R$ 3.29 and 1.00 EUR to R$ 3.82.
One can exchange money in banks in Brazil or in
currency exchanges (safer in shopping centers).
Generally, ATM accept both the Cirrus/MasterCard
and the Plus/Visa cards. ATMs are located all over the
country and offer a reasonable exchange rate.
Visa and MasterCard are widely accepted in Brazil.
American Express and Diners Club, are often accepted
as well. Travelers checks can be difficult to cash, and
when they are cashed, there can be a fee associated
with them.
Getting from/to the Airport
Afonso Pena International airport in Curitiba is about
8 km to city center, and will take about 40 to 50 min
depending on traffic.
At the airport, you can find the services of the
“Aeroporto Executivo”. It is a minibus connecting the
airport to the center of Curitiba. The route passes
through several hotels and important points of the city
during the itinerary. Price: R$14.
(www.aeroportoexecutivo.com.br)
You can also pick a taxi cab (about R$ 90), or Uber /
Cabify (R$30-40). Obs. Take Uber/Cabify only at
Landing Gate.
Getting from/to the Bus station (Rodoferroviária): In
front of the Bus Station there are several bus stop
that runs to downtown.
Feira do Largo da Ordem – Arts and Craft street market (Sunday only)
City tour - http://www.curitiba.pr.gov.br/idioma/portugues/linhaturismo
GENERAL INFORMATION – TRANSPORTATION
7
The public transportation system in Curitiba is
internationally renowned. Since the 1970s, the city
has been concerned with offering the population
more modern and efficient solutions for locomotion.
Common bus: The main means of public
transportation in the capital of Paraná is the bus.
There are more than 250 lines, with 342 tube stations
and 30 terminals, operated by URBS, which serve as
point for vehicle exchange. The great advantage of
the Curitiba transportation system is to be
integrated. With only one ticket paid, you can take
as many buses as you need and go through the
itinerary and the distance you want within any time
frame.
The payment of tickets is made to collectors at the
entrance of the station which streamlines the
transportation system. The vehicles, of various sizes
and purposes, circulate by exclusive routes, but
suffer from overcrowding, frequent at peak times. If
you want to use public transport, avoid trips between
7am and 9am and between 6pm and 8pm. The price
of the fare is R$ 4.25
Link of the transport system in Curitiba:
http://www.urbs.curitiba.pr.gov.br/PORTAL/publica
dor/intranet/BOLETRANS/boletim/upload/1867-
20150415135315_5.pdf
Lines with card transportation: Some lines make use
of the transport card, that is why, they circulate
without collectors. The transport card can be made
in nine addresses by simply presenting CPF and
original identity document with photo and the first
route is free.
Transport card credit loading can be made free of
charge over the internet - in which case credits will
be available within 72 hours. For more information
about lines and how to get the transport card access
to the city's website:
http://www.urbs.curitiba.pr.gov.br/
http://www.urbs.curitiba.pr.gov.br/guia_servico/69
Access to PUCPR: The PUCPR is four kilometers from
downtown, bus access is simple. There are 12 lines
that have bus stops in front and near the campusy.
The yellow lines that lead to downtown are Bom
Retiro / PUC, Raquel Prado and Vila São Paulo, every
20 minutes on business days. On Saturdays, buses
usually take longer. You can check the paths in the
website: site:
http://www.urbs.curitiba.pr.gov.br/horario-de-
onibus
CITY TOUR
Turism Line: The Linha Turismo is a special hop-on
hop-off bus that visits the main tourist attractions in
Curitiba. It is possible to visit the parks, squares and
the rest of the city's tourist attractions. Considered
one of the best in the country, the Linha Turismo is
available every thirty minutes and has a two and a
half-hour tour, which travels around forty-four
kilometers. The tour starts at Praça Tiradentes, but it
is possible to join the tour at any moment. To go on
the tour you must buy a ticket with five vouchers that
gives you the right to get on and off bus four times.
Get to know thw Tourism Line - Linha Turismo and
travel around Curitiba. Linha Turismo uses double-
decker buses. There is an audio system with tourist
information in Portuguese, English and Spanish.
Know more at:
http://www.curitiba.pr.gov.br/idioma/portugues/lin
haturismo
Restaurants and pubs shuttle
In Curitiba, the congress attendants have a free
shuttle service for some restaurants, pubs, theater,
and malls. Service is available from Monday to
Saturday from 19:30 to 23:30 with previous booking.
The transportation booking must be made by the
person in charge at the hotel or at the partner
establishment between 7:30 and 18:30 on the day
that will be used. Easy, safe and free! See more about
the “Leva e Traz de Curitiba” at the site:
http://levaetrazgratis.com.br/, or dial (41) 3888-
3464.
Transportation by apps: Curitiba also has individual
passenger transportation mediated by applications
such as UBER, CABIFY, and 99 POP.
Bus app: Trovit
GENERAL INFORMATION – TRANSPORTATION
8
Train tour to Morretes
The train tour from Curitiba to Morretes or
Paranaguá lasts about 3-4 hours and among its 110
kilomeeters of railway line extension you get to see
amazing landscapes, rich animal and vegetation
biodiversity, spectacular bends, canyons and gorges,
waterfalls and a lot more. After the tour, you can
stroll and visit other tourist attractions in the
historical cities of Morretes. Eating the delicious
Barreado for lunch is also a must do! Barreado, a
typical dish of the Paraná State, Brazil, is a slow-
cooked meat stew prepared in a clay pot whose lid is
sealed with a sort of clay made from wheat or
cassava flour, hence the name (which means, literally,
“muddied”.
Vila Velha State Park
Vila Velha State Park or Parque Estadual de Vila Velha
is located about 90km (55 miles) from Curitiba. The
park is famous because of its intriguing, curious and
very interesting sandstone formations rise from fields
which were at the bottom of an ocean 600 million
years ago. Volcanic eruptions, glaciation, and erosion
by wind and rain have created over 20 gigantic
shapes of a camel, a sphynx, a goblet and many
others. The Goblet is a key element in an indigenous
myth which explains the creation of Vila Velha. Seen
from a distance or from the air, Vila Velha reminds a
medieval town, standing majestic in the Paraná
region of Campos Gerais.
Ilha do Mel (Honey Island)
Ilha do Mel is a perfect place to relax around nature
and and enjoy deserted beaches after the congress.
Access to the Island is by boat, through the Balneário
de Pontal do Sul (approximately half hour). Located
between a complex of state and federal parks, Ilha
do Mel has been transformed into an ecological
station by UNESCO and is currently a Nattural State
Park aiming at the preservation of its riches and
unique natural beauties.Its unique landscape
provides unforgettable tours for its beaches,
coastlines, trails, forests, hills, mangroves and nearby
islands. Not to mention the historical monuments
and the various options of leisure and sports being
surfing, bodyboarding, trekking, canoeing, sailing,
sport fishing and even practiced paragliding.
*You can get more information at the Serra Verde
Express Exhibitor boot
GENERAL INFORMATION – TOURISM
9
Instructions for all presenters in each oral session (invited, orals)
All presenters must ensure their presentations will run properly on PowerPoint for Windows. Computer in the session
room are equipped with Windows 7 or 10. Please, upload your file (PPTX or PDF) at the Registration desk before
your presentation.
Even if you have successfully uploaded your presentation beforehand, we kindly ask you to verify your presentation
file and its fonts, images, videos, animations etc., before each session.
Invited talks: 40 min
Oral talks: 20 min
Please note:
• ALL FILES WILL BE DELETED AT THE END OF THE CONGRESS.
• THE “PRESENTER VIEW” IS NOT AVAILABLE ON THE SCREEN. IF YOU NEED YOUR NOTES, PLEASE BRING THEM
ON PAPER.
Instructions for all Poster presenters
Poster Location: Bloco Verde (Building 3)
Authors are responsible for the set up and the removal of their posters according to the following schedule:
Poster Sessions
Mounting Time: from 8:00 to 12:00
Poster Networking Times: from 15:50 to 17:50
Removal: after 18:00
Presenter are responsible for poster removal. All poster materials will be discarded if not removed from the boards
by 18:30 each day.
Poster size: 90 x 120 cm
Posters can be printed beforedhand if wanted, and delivered to you during the week. Please contact the
printing company for pricing and payment details:
RAROS Plotagem
email: raros@raros.com.br ou rarosplotagem@gmail.com
tel: (41) 3366-5498 or (41) 3365-4231
There is also a possibility to print the posters on campus, if needed.
Use of video equipment prohibited
The use of video recording equipment, cameras, cell phone cameras, or audio equipment is prohibited at any oral
session without prior written approval of the ABCM. The ABCM reserves the right to reroduce, by any means
selected, any or all of these presentations and materials.
REMINDER: Please turn off CELL PHONES when you are attending all oral sessions.
PRESENTER GUIDELINES
10
DEC 3 / SUN DEC 4 / MON DEC 5 / TUE DEC 6 / WED DEC 7 / THU DEC 8 / FRI
Coffee break Coffee break Coffee break Coffee break Coffee break
Closing Ceremony
Opening cerimony
Lunch Lunch
Registration Registration Registration Registration Registration
AERO, BIOE, COMB, DYNM,
NMMS, ENTS, FLMR, MMEN,
MECH, ICONNE, QUSM, SOLM
Lunch Lunch
MECH, ENTS, FRFS, FLMR, HVAC,
MMEN, DYNM
MECH, ENTS, FRFS, FLMR, HVAC,
MMEN, DYNM
AERO, FIVB, FRFS, PROD, DYNM,
ENTS, FLMR, MMEN, MECH,
SMST, HVAC
AERO, FIVB, FRFS, PROD, DYNM,
ENTS, FLMR, MMEN, MECH,
SMST, HVAC
AERO, FIVB, COMB, DYNM, ENTS,
FLMR, MMEN, MECH, ICONNE,
SOLM
AERO, BIOE, COMB, DYNM,
NMMS, ENTS, FLMR, OSPE,
MMEN, MECH, ICONNE, SOLM
Poster Session (120 min)
Coffee Break
AERO, FIVB, COMB, DYNM, ENTS,
FLMR, HVAC, MMEN, NUCE,
ICONNE, MECH
Social Gathering
Botecaria
Registration
Plenary talk (60 min)
Welcome coktail
Poster Session (120 min)
Coffee Break
ENACEM, FRFS, DYNM, ENTS,
PROD, SMST, MMEN, MECH
AERO, BIOE, COMB, DYNM, ENTS,
FLMR, MMEN, MECH, ICONNE,
QUSM, SOLM
Poster Session (120 min)
Coffee Break
AERO, BIOE, COMB, DYNM, ENTS,
FLMR, OSPE, MMEN, PIPV, SOLM,
MECH, NMMS
Poster Session (120 min)
Coffee Break
AERO, BIOE, COMB, DYNM, ENTS,
FLMR, MMEN, QUSM, SOLM,
MECH
ENACEM, FRFS, PROD, DYNM,
ENTS, FLMR, MMEN, MECH,
SMST, HVAC
AERO, FIVB, COMB, DYNM, ENTS,
FLMR, MMEN, MECH, ICONNE,
SMST, EMBRAER
EMBRAER AWARD
AUD. 5 - Bldg 3 (Verde)
ABCM Committes Meeting
AUD. 5 - Bldg 3 (Verde)
Invited - SBPC President
19:30 - 20:30
20:30 - 22:30
22:30 - 00:00
7:00 -08:30
08:30 - 10:10
10:10 - 10:40
10:40 - 12:00
12:00 - 13:30
13:30 - 15:50
15:50 - 17:50
16:50 - 18:30
AERO, BIOE, COMB, DYNM,
NMMS, ENTS, FLMR, OSPE,
MMEN, MECH, ICONNE, SOLM
AERO, BIOE, COMB, DYNM, ENTS,
FLMR, OSPE, MMEN, MECH,
ICONNE, PIPV, SOLM
AERO, BIOE, COMB, DYNM,
NMMS, ENTS, FLMR, MMEN,
MECH, ICONNE, QUSM, SOLM
Lunch
AERO, FIVB, COMB, DYNM, ENTS,
FLMR, MMEN, MECH, ICONNE,
SOLM
AERO
Energy and Thermal Sciences
FIVB Flow Induced Vibration
COMB Combustion and Environmental Engineering
DYNM Dynamics
ENACEM Education Symposium
ENTS
Pipping and Pressure Vessels
Mechatronics and Automation
Nano and Microfluidic and Micro-Systems
Non–linear Phenomena
FRFS Fracture, Fatigue, and Structural Integrity
HVAC Heating, Ventilation, Air-Conditioning and Refrigeration
COBEM 2017 - PROGRAM AT A GLANCE
MMEN
FLMR Fluid Mechanics and Rheology
MECH
NMMS
ICONNE
Aerospace Engineering
BIOE Bioengineering
PIPV
Materials and Manufacturing Engineering
ABCM General Metting
AUD. 5 - Bldg 3 (Verde)
SOLM Solid Mechanics
19:00 - 19:30
PROD Product Engineering
QUSM Quantification of Uncertainties and Stochastic Modelling
SMST Smart Materials and Structures
NUCE Nuclear Engineering
OSPE Offshore and Petroleum Engineering
PROGRAM AT A GLANCE
11
ROOM 1 morning
BLDG. 3 afternoon
ROOM 2 morning
BLDG. 3 afternoon
ROOM 3 morning
BLDG. 3 afternoon
ROOM 4 morning
BLDG. 3 afternoon
ROOM 5 morning
BLDG. 3 afternoon
ROOM 6 morning
BLDG. 3 afternoon
ROOM 7 morning
BLDG. 3 afternoon
ROOM 8 morning
BLDG. 3 afternoon
ROOM 9 morning
BLDG. 3 afternoon
ROOM 10 morning
BLDG. 3 afternoon
AUD 1 morning
LIBRARY afternoon
AUD 2 morning
LIBRARY afternoon
AUD 3 morning
BLDG. 1 afternoon
AUD 4 morning
BLDG. 1 afternoon
AUD 5 morning
BLDG. 1 afternoon
POSTER HALL
BLDG. 1
afternoonSMST
MMEN
MECH
ENACEM
FRFS
DYNM
ENTS
PROD
HVAC
MMEN
NUCE
ICONNE
MECH
AERO
FIVB
COMB
DYNM
ENTS
FLMR
MMEN
QUSM
SOLM
MECH
AERO
BIOE (BIOMECH)
COMB
DYNM
ENTS
FLMR
OSPE
MMEN
PIPV
SOLM
MECH
NMMS
AERO
BIOE (bioma/med)
COMB
DYNM
ENTS
FLMR
POSTER SESSIONS
MON / 4 TUE / 5 WED / 6 THU / 7 FRI / 8
MMEN1
MMEN2
DYNM1
FLMR1
HVAC
ENTS3
FRFS
MECH1
MMEN1
MMEN1
MMEN2
MMEN2
DYNM1
DYNM1
SMST
SMST
FLMR1
FLMR1
HVAC
HVAC
ENTS2
ENTS2
DYNM2
DYNM2
PROD
PROD
ENTS3
ENTS3
FRFS
FRFS
ENTS1
AERO
ENACEM
FIVB
MECH2
MECH1
MECH1
MMEN1
MMEN1
MMEN2
MMEN2
DYNM1
DYNM1
SOLM
SMST
FLMR1
FLMR1
FLMR2
FLMR2
ENTS2
ENTS2
DYNM2
EMBRAER
ICONNE
ICONNE
ENTS3
ENTS3
COMB
COMB
ENTS1
ENTS1
AERO
AERO
FIVB
FIVB
MECH1
MECH1
MMEN1
MMEN1
MMEN2
MMEN2
DYNM1
DYNM1
SOLM
SOLM
FLMR1
FLMR1
FLMR2
FLMR2
ENTS2
ENTS2
QUSM
QUSM
ICONNE
ICONNE
NMMS
COMB
COMB
ENTS1
ENTS1
AERO
AERO
BIOE (BIOMECH)
BIOE (BIOMECH)
MECH1
MECH1
MMEN1
MMEN1
MMEN2
MMEN2
DYNM1
DYNM1
SOLM
SOLM
FLMR1
FLMR1
FLMR2
FLMR2
ENTS2
ENTS2
OSPE
OSPE/PIPV
ICONNE
ICONNE
NMMS
COMB
COMB
ENTS1
ENTS1
AERO
AERO
BIOE (BIOMAT)
BIOE (BIOMAT)
MECH1
MECH1
ORAL SESSIONS
MON / 4 TUE / 5 WED / 6 THU / 7 FRI / 8
COBEM 2017 – ROOM MATRIX
12
Invited presentations are 40 min; contributed oral presentations are 20 min.
4 / SEG 5 / TER 6 / QUA 7 / QUI 8 / SEX
Paper Room Paper Room Paper Room Paper Room Paper Room 8:30 8:50
8:50 9:10
9:10 9:30
9:30 9:50
9:50 10:10
10:10 10:40 Coffee break Coffee break Coffee break Coffee break Coffee break
10:40 11:00
11:00 11:20
11:20 11:40
11:40 12:00
Closing Ceremony
12:00 12:20
Lunch Lunch Lunch Lunch Lunch 12:20 12:40
12:40 13:00
13:00 13:30
Paper Room Paper Room Paper Room Paper Room
13:30 13:50
13:50 14:10
14:10 14:30
14:30 14:50
14:50 15:10
15:10 15:30
15:30 15:50
15:50 16:10
Poster Session Poster Session Poster Session Poster Session
16:10 16:30
16:30 16:50
16:50 17:10
17:10 17:30
17:30 17:50
17:50 18:10
18:10 18:30
18:20 18:40
18:40 19:00
19:00 19:20
19:20 19:40
Dinner
19:40 20:00
20:00 20:20
20:20 20:40
20:40 21:00
21:00 21:20
21:20 21:40
21:40 22:00
22:00 22:20
22:20 22:40
22:40 23:00
23:00 23:20
23:20 23:40
PLANNING GRID
13
ORAL SESSION MON / 4
AERO - Aerospace Engineering (Room 1 – Bldg. 4 / Laranja)
TIME CODE Flight Dynamics
8:30 0750 AERO1
Model identification approach for aircraft failure detection on take-off maneuver
using a motion-based simulator, A. D. Kraemer, D. H. Arjoni, E. Villani (Instituto
Tecnológico de Aeronáutica)
8:50 1463 AERO2 A preliminary study on active flow control applied to crosswind stability of high-
speed trains, A. M. Correa, F. Souza, C. Duarte (Universidade Federal de Uberlândia)
9:10 2498 AERO3 Influence of aerodynamic stability on the trajectory of uncontrolled sounding
rockets, E. Pereira, E. Barbosa (Instituto de Aeronáutica e Espaço)
9:30 2640 AERO4
Dynamic considerations for engine’s charts and application at EMB-314 and
Northrop F-5F aircraft, G. Silva, D. S. A. Albuquerque, F. Silvestre (Instituto
Tecnológico de Aeronáutica), A. Uehara (Instituto de Pesquisas e Ensaios em Voo)
9:50 0666 AERO5 On the absolute instability of laminar separation bubbles, M. Avanci, D. Rodriguez,
L. S. B. Alves (Universidade Federal Fluminense)
10:10 Coffee-break
TIME CODE Aerospace structures
10:40 1807 AERO6 Processing and characterization of Si based diffusion coatings on metallic Nb, A. S.
D'Oliveira, M. Thomé (Universidade Federal do Paraná)
11:00 1125 AERO7
Mechanics of hybrid nanocomposites: the carbon nanotube/graphene effect into
failure modes, A. Avila, S. G. Leão, F. L. R. M. Lima, M. G. M. Martins, N. C. F.
Menezes, M. N. Mello (Universidade Federal de Minas Gerais)
11:20 1126 AERO8
Mechanical behavior of piezoelectric nanomembranes doped with carbon nanotubes,
A. Avila, S. G. Leão, N. C. F. Menezes, F. L. R. M. Lima, M. G. M. Martins, M. N. Mello
(Universidade Federal de Minas Gerais)
11:40 0186 AERO9
Effect of acid attack on thermal degradation and complex electromagnetic
parameters of CF/Ni fabric applied on wind turbine rotor blades, D. C. Silveira, M. L.
Costa (São Paulo State University), N. A. S. Gomes (Technological Institute of
Aeronautics), M. C. Rezende (Technological Institute of Aeronautics, Federal
University of São Paulo)
12:00 Lunch
TIME CODE Aerospace structures
13:30 2874 AERO10
A study on the influence of force excitation frequency on the load reconstruction
method, A. R. S. dos Santos, T. V. Lisbôa, R. Marczak (Universidade Federal do Rio
Grande do Sul)
13:50 1668 AERO11
Experimental and numerical buckling analyses of tow steered composite plates, D. A.
Pereira (Instituto Tecnológico de Aeronáutica), W. L. N. de Mello (Instituto de
Pesquisa Tecnológica do Estado de São Paulo), V. Reis (Instituto Tecnológico de
Aeronáutica), T. Guimarães (Universidade Federal de Uberlândia), D. Rade (Instituto
Tecnológico de Aeronáutica)
14:10 1706 AERO12
Experimental studies of heat insulation materials for hybrid propellant rocket motors,
G. P. Milhomem, A. P. Nunes, A. Andrianov, O. Shynkarenko, J. Lee (Universidade
de Brasília)
14:30 2396 AERO13
A tool for local buckling optimization of composite panels using NASTRAN® SOL
200, G. Abreu, S. Castro (Embraer), J. A. Hernandes (Instituto Tecnológico de
Aeronáutica)
14:50 1395 AERO14
Studies on aeroelastic optimization of composite swept wings, H. L. Lebkuchen,
R. G. A. da Silva (Technological Institute of Aeronautics, ITA), C. E. de Souza
(Federal University of Santa Maria)
15:10 1870 AERO15 Retrieving fiber angle distribution for variable stiffness laminates for a buckling load
problem, H. Quadros, J. A. Hernandes (Instituto Tecnológico de Aeronáutica)
15:30 0623 AERO16
Postbuckling optimization of laminated composite rectangular plates and stiffened
panel under compression using firefly algorithm, R. M. Koide, M. A. Luersen
(Universidade Tecnológica Federal do Paraná)
DETAILED PROGRAM - ORAL SESSION (AREA / DAY)
14
ORAL SESSION TUE / 5
AERO - Aerospace Engineering (Room 1 – Bldg. 4 / Laranja)
TIME CODE Aerodynamics
8:30 0514 AERO17
Study of viscous flows using high-order methods and curved boundary treatment, A.
R. B. Aguiar (Instituto de Aeronáutica e Espaço), F. M. Moreira (Instituto
Tecnológico de Aeronáutica), E. Jourdan (Instituto Tecnológico de Aeronáutica), J.
L. F. Azevedo (Instituto de Aeronáutica e Espaço)
8:50 5900 AERO18
Slat noise: experimental and numerical efforts at USP-São Carlos. D. S. Souza
(Universidade Federal de São João del Rei), C. Pagani (Universidade Estadual
Paulista Julio de Mesquita Filho), F. Amaral (Universidade de São Paulo), F. H. T.
Himeno (Universidade de São Paulo), D. Rodriguez (Universidade Federal
Fluminense), M. Medeiros (Universidade de São Paulo)
9:10 1607 AERO19
Numerical study of the JSM high-lift configuration using a RANS approach. R. G. da
Silva (Instituto de Aeronáutica e Espaço), L. M. M. O. Carvalho (Instituto
Tecnológico de Aeronáutica), J. L. F. Azevedo (Instituto de Aeronáutica e Espaço),
E. Basso (Instituto de Aeronáutica e Espaço)
9:30 0690 AERO20
Experimental assesment of a low reynolds number vehicle, D. Acevedo-Giraldo, L.
Botero-Bolivar, P. D. Bravo-Mosquera, H. Cerón-Muñoz, (Universidade de São
Paulo), F. Catalano (Escola de Engenharia de São Carlos)
9:50 1038 AERO21
Validation of a limiting methodology for high-order methods, M. A. L. Matunaga, F.
M. Moreira (Instituto Tecnológico de Aeronáutica), J. L. F. Azevedo (Instituto de
Aeronáutica e Espaço)
10:10 Coffee-break
TIME CODE Aerospace structures
10:40 0168 AERO22
Dynamic analysis of laminate plates via Carrera Unified Formulation, M. L. Ribeiro,
M. Sartorato (Universidade de São Paulo), R. Medeiros (Universidade do Estado de
Santa Catarina), A. Ferreira (Universidade do Porto, Portugal), V. Tita (Universidade
de São Paulo)
11:00 0331 AERO23 Nonlinear dynamics analysis of trusses applied to aerospace structures, L. S. de
Arruda (Universidade de São Paulo), R. Brasil (Universidade Federal do ABC)
11:20 1543 AERO24
A numerical study on the effect of ply orientation in lamb wave propagation through
carbon fiber reinforced composites, L. E. J. Bustamante, H. Brito, V. Tita, M. L. Ribeiro
(Universidade de São Paulo)
11:40 0326 AERO25
Composite plates model updating using Kriging method, L. F. S. Souza (Santa
Catarina State University), V. Tita (University of São Paulo), R. Medeiros (Santa
Catarina State University)
12:00 Lunch
TIME CODE Aerospace structures
13:30 2025 AERO26
Preliminary thermal protection system for the 14-X S scramjet technological
demonstrator for atmospheric flight at 30 km altitude and speed corresponding to
Mach Number 7, J. E. da Silva Junior, J. Pinto (Universidade de São Paulo), P. Toro
(Instituto de Estudos Avançados), F. da Costa (Instituto Tecnológico de
Aeronáutica)
13:50 2077 AERO27
A new approach for estimating the distribution of the lifting force for sizing of a
stringer of an aerodesign class airplane, M. Miguel, P. Ruhan, E. Woiski
(Universidade Estadual Paulista Julio de Mesquita Filho)
14:10 0531 AERO28 Shape distortions of angled sandwich panels, O. M. Makinde, A. Faria, M. Donadon
(Instituto Tecnológico de Aeronáutica)
14:30 1557 AERO29 Shape distortion predictions of curved sandwich panels: a parametric study, O. M.
Makinde, A. Faria, M. Donadon (Instituto Tecnológico de Aeronáutica)
14:50 2873 AERO30
An experimental study on the impact behavior of CF/epoxy circular tubes, P. B.
Ataabadi (Universidade de São Paulo), D. Karagiozova (Bulgarian Academy of
Sciences, Bulgaria), L. Driemeier, M. Alves (Universidade de São Paulo)
15:10 0497 AERO31 Non-isothermal aeroelastic behavior of a typical section with shape memory alloy
springs, V. C. de Sousa, T. M. P. Silva, C. de Marqui Jr (University of São Paulo)
15:30
15
ORAL SESSION WED / 6
AERO - Aerospace Engineering (Room 1 – Bldg. 4 / Laranja)
TIME CODE Aerodynamics
8:30 0139 AERO32
What does linear instability analysis tells us about airfoil tonal noise?, D. Rodriguez
(Universidade Federal Fluminense), E. M. Gennaro (Universidade Estadual Paulista),
W. Arias-Ramirez, W. Wolf (Universidade Estadual de Campinas)
8:50 1465 AERO33 CFD analysis on high-speed train aerodynamics under crosswind conditions, A. M.
Correa, F. Souza (Universidade Federal de Uberlândia)
9:10 2697 AERO34
Analysis of influence of plain flap and gurney flap on aerodynamics coefficients of
the airfoil SELIG 1223 by finite volume method, A. Almeida, L. M. C. Ferro
(Universidade Federal Rural do Semi-Arido)
9:30 2660 AERO35 A low computational cost analysis for a vertical axis wind turbine according to
MSTM, A. C. R. Maia, H. Cerón-Muñoz (Universidade de São Paulo)
9:50 1408 AERO36
Parametric drag analysis of strut braced wing aircraft for regional aviation, A. C.
Meinicke, J. C. M. Rodrigues (Instituto Tecnológico de Aeronáutica), P. Guedes
(Embraer), R. G. A. da Silva (Instituto Tecnológico de Aeronáutica)
10:10 Coffee-break
TIME CODE Control Systems and Aeroelasticity
10:40 2477 AERO37 Modal testing of a flexible wing UAV, D. Zuñiga, L. C. Sandoval, R. Barbosa, B. Maciel
(Instituto Tecnológico de Aeronáutica), I. Drago (FT Sistemas)
11:00 2229 AERO38 HIL system with 3-axis Gimbal for UAV’s autopilot tests, D. Costa, N. M. F. Oliveira, R.
d'Amore (Instituto Tecnológico de Aeronáutica)
11:20 1988 AERO39
Control systems for flutter suppression of a typical section, G. Silva, F. Silvestre, M.
Donadon, O. S. Santos, A. B. Guimarães Neto, R. G. A. da Silva, T. Versiani, R.
Bertolin (Instituto Tecnológico de Aeronáutica)
11:40
12:00 Lunch
TIME CODE Control Systems and Aeroelasticity
13:30 1742 AERO40
Theoretic-numerical-experimental study of high aspect ratio wing aeroelastic
response, O. Neto (Universidade Federal de Uberlândia), R. Duarte (Universidade
Federal de Campina Grande), D. P. A. Peña (Universidade Federal da Paraíba), R. G.
A. da Silva (Instituto Tecnológico de Aeronáutica)
13:50 0915 AERO41 Modeling, simulation and control of a launch vehicle, R. Zanatta, M. Sousa, S. Cunha
Jr (Universidade Federal de Itajubá)
14:10 2815 AERO42 The use of digital cameras as orbital sensors in spacecraft, W. M. Lopes Jr., J. C. V. de
Castro, R. Rocha (Universidade Federal de Outo Preto)
16
ORAL SESSION THU / 7
AERO - Aerospace Engineering (Room 1 – Bldg. 4 / Laranja)
TIME CODE Propulsion
8:30 1167 AERO43
Design and analysis of a scramjet inlet and combustion chamber for heat addition
rate investigation, F. da Costa (Instituto Tecnológico de Aeronáutica), A. C. de
Oliveira, P. Toro, T. Rolim (Instituto de Estudos Avançados)
8:50 0235 AERO44 Propulsion parameters of Noble-Abel gases, F. S. Costa (Instituto Nacional de
Pesquisas Espaciais)
9:10 0571 AERO45
Building and testing of a lab-scale hybrid rocket motor for acquisition of regression
rate equations, G. Engler, T. Araújo (Universidade Federal do ABC), L. H. Gouvêa, F.
S. Costa (Instituto Nacional de Pesquisas Espaciais)
9:30 0549 AERO46 Spray cone angles by a pressure swirl injector for atomization of gelled ethanol, G. A.
A. Fischer, F. Costa, J. C. Andrade (Instituto Nacional de Pesquisas Espaciais)
9:50 1322 AERO47
Theorical and experimental heat transfer in rocket engine with solid propellant, I.
Vicentin, C. H. Marchi (Universidade Federal do Paraná), A. C. Foltran (Universidade
Positivo), D. F. Moro, N. D. P. da Silva, M. Campos, L. Araki (Universidade Federal
do Paraná )
10:10 Coffee-break
TIME CODE Propulsion
10:40 0902 AERO48 Burning of polyethylene with hydrogen peroxide in a 2D slab combustor, L. H.
Gouvêa, F. S. Costa (Instituto Nacional de Pesquisas Espaciais)
11:00 0990 AERO49 Flow analysis inside the combustion chamber and the nozzle of a hybrid rocket
motor, P. G. C. Martins, O. Shynkarenko (Universidade de Brasília)
11:20 0222 AERO50 A study of foamed cooling channel for rocket engines, M. Celone, R. C. Moro Filho
(Universidade Federal do Rio Grande do Norte)
11:40
12:00 Lunch
17
ORAL SESSION MON / 4
BIOE - Bioengineering (Room 2 – Bldg. 4 / Laranja)
TIME CODE Biomaterials
8:30 Invited A multi-physics approach to tribocorrosion studies of metallic biomaterials, J. Gilbert
(Clemson University, USA)
9:10 1009 BIOE1
Corrosion properties of Mg-Ca-Gd alloy applied to biodegradable implants, A. C. C.
de Almeida, C. Elias, D. Fernandes, E. Monteiro, P. Gomes (Instituto Militar de
Engenharia)
9:30 2494 BIOE2
Wear in prosthetic implants: mass loss, GVS and SPL on diagnostic of pH influence
on metal-porcine bone union during mechanical masticatory process, N. M. F. T. S.
Araújo, G. S. A. Pontes, J. A. L. de Sousa, M. S. Oliveira, J. T. N. de Medeiros
(Universidade Federal do Rio Grande do Norte)
9:50 2422 BIOE3
Corrosion properties of Zn-TiO2 produced by plasma electrolytic oxidation, D. E.
Francisco, L. S. Santos, C. A. H. Laurindo, P. Soares (Pontifícia Universidade Católica
do Paraná)
10:10 Coffee-break
TIME CODE Biomaterials
10:40 0718 BIOE4 Silicone reinforced by nylon fibers under simple shear for emulating biological
tissues, C. S. Moreira, R. P. Faria, L. Nunes (Universidade Federal Fluminense)
11:00 2658 BIOE5
Production of nanofiber for biomedical application, P. Capellato (Universidade
Estadual de Campinas), A. P. R. A. Claro (Universidade Estadual Paulista Julio de
Mesquita Filho), C. Zavaglia (Universidade Estadual de Campinas), G. Silva
(Universidade Federal de Itajubá)
11:20 1900 BIOE6
Mechanical behaviour of a titanium implant for repair of rotator cuff tears, M. V.
Guimarães, C. A. Araújo, T. C. Carmo (Universidade Federal de Uberlândia), E. D.
Bonifácio (Universidade Federal dos Vales do Jequitinhonha e Mucuri), D. V. Novais
(Universidade Federal de Uberlândia)
11:40 2383 BIOE7
Adhesion evaluation of nanostructured coatings on titanium alloy for biomedical
applications, A. L. A. Hatem, L. F. Reali (Pontifícia Universidade Católica do Paraná),
J. Lin, R. Wei (SouthWest Research Institute), R. Torres, C. A. H. Laurindo, P. Soares
(Pontifícia Universidade Católica do Paraná)
12:00 Lunch
TIME CODE Biomaterials
13:30 Invited Superhydrophobic surfaces for blood contacting medical devices, K. Popat (Colorado
State University, USA)
14:10 0705 BIOE8
Bactericidal activity evaluation of TiO2 coatings doped with silver, zinc and boron, L.
Santos, S. Cogo, M. Dias-Netipanyj (Pontifícia Universidade Católica do Paraná), S.
Pinto (Universidade Estadual de Ponta Grossa), S. Espósito, P. Soares (Pontifícia
Universidade Católica do Paraná)
14:30 1932 BIOE9
Selective Laser Sintering of poly(vinyl alcohol) with the purpose of producing scaffolds
for in vitro studies, M. Meruvia, C. Higa, F. L. Amorim, S. E. Esposito, T. G. F. C. do
Nascimento (Pontifícia Universidade Católica do Paraná), M. Oliveira, P. Inforçatti
Neto, J. V. L. da Silva (Centro de Tecnologia da Informação Renato Archer)
14:50 1273 BIOE10 Mechanical characterization of a cell by AFM: computational approach, P. H. O.
Ramos, L. A. G. Torres (Universidade Federal dos Vales do Jequitinhonha e Mucuri)
15:10 5488 BIOE11
Incorporation of Chlorhexidine on Ti15Mo alloy after TiO2 nanotubes growth – in
vitro study, A. R. Rangel, F. V. P. Kodaira, R. T. Konatu, A. L. A Escada, A. P. R. Alves
Claro (Universidade Estadual Paulista)
15:30 Invited Health Innovation using the Biodesign Tools, R. Pecoits-Filho (Pontifícia
Universidade Católica do Paraná)
18
ORAL SESSION TUE / 5
BIOE - Bioengineering (Room 2 – Bldg. 4 / Laranja)
TIME CODE Biomechanics
8:30 2469 BIOE12
Upper limb rehabilitation through bicycle controlling, L. M. Pedro (Universidade
Federal de São Carlos), L. Cardoso, M. Martelleto (Universidade de São Paulo), P.
M. Aguiar (Instituto Federal de São Paulo), G. Caurin (Universidade de São Paulo),
R. Aroca (Universidade Federal de São Carlos)
8:50 2456 BIOE13
Classification of right and left elbowmovement with lower gamma activity, E. Veslin,
M. S. Dutra, L. Bevilacqua (Universidade Federal do Rio de Janeiro), L. S. C.
Raptopoulos, W. Andrade (Centro Federal de Educação Tecnológica Celso Suckow
da Fonseca), A. da Silva, M. Fiorani, J. G. M. Soares (Universidade Federal do Rio de
Janeiro)
9:10 0920 BIOE14
Mechanical analysis of the adaptative hip guide for periacetabular osteotomy
surgery, F. G. Silva, F. Bastos, A. Scari, B. G. S. e Souza (Universidade Federal de Juiz
de Fora)
9:30 0350 BIOE15
Development of a temporomandibular joint prosthesis based on the kinematic
behavior of a healthy system, H. T. Idogava, G. B. Daniel (Universidade Estadual de
Campinas)
9:50 2267 BIOE16
Hemodynamic numerical study of an aneurysm in the vicinity of a three-dimensional
arterial bifurcation, J. Carvalho, G. A. P. Baggio, J. B. C. Silva (Universidade Estadual
Paulista Julio de Mesquita Filho)
10:10 Coffee-break
TIME CODE Biomechanics
10:40 0599 BIOE17 Mechanical design of a low cost transhumeral prosthesis, J. L. V. Dias, L. A. G.
Malagón (Universidade de Pernambuco)
11:00 2423 BIOE18
Analysis of forces and angles of the lower member’s articulations during the human
gait, J. S. R. Martins, F. Vieira (Pontifícia Universidade Católica de Minas Gerais), C.
Vimieiro (Universidade Federal de Minas Gerais), J. M. S. Ribeiro (Centro Federal de
Educação Tecnológica de Minas Gerais)
11:20 2800 BIOE19
Quantification of force in specific muscle groups during the flexion and extension
movement of the elbow and knee joints of the human body, J. Atehortua, D. Buritica,
R. Matallana, S. Vallejo (Universidad Nacional de Colombia), F. Valencia (Fundación
Universitaria María Cano), J. Ramirez (Universidad Nacional de Colombia)
11:40 2475 BIOE20
Instrumented module for investigation of contact forces for use in rehabilitation and
assessment of bimanual functionalities, L. M. Pedro (Universidade Federal de São
Carlos), M. Martelleto (Universidade de São Paulo), P. M. Aguiar (Instituto Federal
de São Paulo), G. Caurin (Universidade de São Paulo), R. Aroca (Universidade
Federal de São Carlos)
12:00 Lunch
TIME CODE Biomechanics
13:30 0951 BIOE21
A splines based method for modeling the human head for use in finite elements
analysis, L. M. Rincon, D. Ponce, E. Szpoganicz (Universidade Federal de Santa
Catarina)
13:50 2016 BIOE22
An analytical model for an intramedullary nailing, P. P. Kenedi, J. R. O. Silva Neto
(Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), L. L. Vignoli
(Universidade Federal do Rio de Janeiro)
14:10 2222 BIOE23 Manufacturing of multi-element piezoelectric transducer to use in ultrasound
elastography, B. Coelho, C. N. Pai (Universidade de São Paulo)
14:30 2749 BIOE24 Control Simulation in Functional Electrical Stimulation Application, D. Garcia, P. M.
Aguiar (Instituto Federal de São Paulo)
14:50 2865 BIOE25
A review on whole body vibration for bone mineral density increase: effectiveness
potentially masked, A. Delfim (Universidade Federal de Minas Gerais), M. V. de Faria
(UniFOA), E. B. Medeiros, J. Oliveira, G. H. Godoi (Universidade Federal de Minas
Gerais)
15:10 -- -- --
15:30 -- -- --
19
ORAL SESSION MON / 4
COMB - Combustion and Environm. Eng. (Room 5 – Bldg. 4 / Laranja)
TIME CODE Engine Combustion
8:30 0264 COMB1
Development of a measurement system of temperature and pressure in the
combustion chamber of a torch ignition system, K. Souza, O. Shynkarenko
(Universidade de Brasília)
8:50 0277 COMB2
Measuring and comparing the ignition delay times of diesel, ethanol additive and
biodiesel using a shock tube, C. Santana, J. E. M. Barros, H. A. de Almeida Jr
(Universidade Federal de Minas Gerais)
9:10 0360 COMB3 Investigations of effects of timing injection in four-stroke direct-injection diesel
engines performance, P. G. K. Nunes, W. Gallo (Universidade Estadual de Campinas)
9:30 0643 COMB4 Advanced hybrid modelling for pilot ignited dual-fuel combustion, B. S. Soriano, E. S.
Richardson (University of Southampton, UK)
9:50 0706 COMB5
Effect of air-fuel ratio on Syngas combustion in an optically accessible spark ignition
engine, S. D. M. Boggio, P. Lacava, M. Silva (Instituto Tecnológico de Aeronáutica),
S. Merola, A. Irimescu (Instituto Motori, CNR - Italy), P. Curto-Risso (Universidad de
la República, Uruguay)
10:10 Coffee-break
TIME CODE Engine Combustion
10:40 0728 COMB6
Effect of using exhaust gas recirculation (EGR) on the lubricant contamination and
cylinder liner wear in a diesel combustion engine, C. H. Silva, M. A. Muraro
(Universidade Tecnológica Federal do Paraná)
11:00 0773 COMB7
Comparison between chemical kinetics and chemical equilibrium approaches for NO
and CO formations on spark ignition engine conditions, A. J. T. B. de Lima, W. Gallo
(Universidade Estadual de Campinas)
11:20 1308 COMB8
Robust identification of pressure oscillations in the combustion chamber of a heavy
duty turbine, E. Yamao (Institutos Lactec), J. Pierezan (Universidade Federal do
Paraná), G. Maidl (Pontifícia Universidade Católica do Paraná), E. Yamao (Institutos
Lactec), J. P. S. Gonçalves (Instituto de Tecnologia Para o Desenvolvimento), F.
Chiesa (Usina Elétrica a Gás de Araucária), L. Coelho (Pontifícia Universidade
Católica do Paraná)
11:40 1477 COMB9
Effects of the use of D-Limonene as an additive to diesel-biodiesel blends on exhaust
gases composition of compression ignition engines, L. Micheli, D. Módolo, L. E. R.
Pereira (Universidade Estadual Paulista)
12:00 Lunch
TIME CODE Engine Combustion
13:30 1496 COMB10
Effects of injection timing on performance, combustion and emissions of a gasoline
DI engine, V. Cogo (Universidade Federal de Santa Maria), T. Lanzanova (Brunel
University, UK), M. D. Nora, A. Aronis, M. Martins (Universidade Federal de Santa
Maria)
13:50 1590 COMB11 Simulation of a hybrid vehicle propeller moved to ethanol, A. Delfim, G. M. A.
Carvalho, B. S. Lima, B. Murta (Universidade Federal de Minas Gerais)
14:10 1623 COM12
Performance, combustion and emissions analysis of a diesel engine fueled with
soybean oil preheated by microwave irradiation, F. V. Lewiski, N. A. N. Garzón, E.
Bazzo (Universidade Federal de Santa Catarina), J. Antolini, G. A. F. Prante, M.
Martins (Universidade Federal de Santa Maria)
14:30 1675 COMB13
Study of the thermal efficiency of an ICE-diesel using diesel fuel, biofuel and mixture,
E. Rocha, V. S. Gonçalves (Universidade Candido Mendes), F. Soto (Universidade
Federal de São João del Rei), A. L. V. de Carvalho (Universidade Candido Mendes)
14:50 1999 COMB14
Multipoint ethanol injection system for diesel engines, A. R. A. Achy, W. Souza, J. A.
S. Silva, G. G. Demetino (Universidade Federal da Bahia), L. C. Soares Jr, V. Ferreira
(Universidade Federal do Recôncavo da Bahia), I. M. Pepe (Universidade Federal da
Bahia)
15:10 2870 COMB15
Hydrogen addition effects in air-fuel mixture on alternative internal combustion
engine, D. Silva (Universidade Estácio de Sá), G. S. Rodrigues (Pontifícia
Universidade Católica do Rio de Janeiro)
15:30 -- -- --
20
ORAL SESSION TUE / 5
COMB - Combustion and Environm. Eng. (Room 5 – Bldg. 4 / Laranja)
TIME CODE Engine Combustion
8:30 2079 COMB16
Applying multi-objective differential evolution and NSGA-II optimization algorithms
on a single-cylinder internal combustion engine, G. Menzel, S. H. Och, L. M. Moura
(Pontifícia Universidade Católica do Paraná)
8:50 2104 COMB17
Analysis of lambda, angle of injection and substitution rate in hydrocarbons
Emissions in diesel cycle engine operating in dual fuel mode, S. C. L. Nogueira, L. M.
Moura, S. H. Och (Pontifícia Universidade Católica do Paraná)
9:10 2376 COMB18
Compensation of the engine indicating pressure signal distortion produced by a
fiber-optic sensor, J. Velásquez (Universidade Tecnológica Federal do Paraná), D.
Santos (PETROBRAS Petróleo Brasileiro S.A.), I. Bassani (Pontifícia Universidade
Católica do Paraná)
9:30 2516 COMB19
Portrayal of displacer and temperature in Beta-type Stirling engine, B. Caetano, O. R.
S. Rodriguez, R. M. Valle, I. F. Lara, G. Giudice (Universidade Federal de Minas
Gerais)
9:50 2627 COMB20
Development and comparison of a phenomenological predictive model of one and
two zones for a spark ignition engine, A. P. Mattos, W. Gallo (Universidade Estadual
de Campinas)
10:10 Coffee-break
TIME CODE Chemical Kinetics and Modeling
10:40 0212 COMB21
Evaluation of emissions of burning alternative liquid fuels in gas turbine combustors,
G. Almeida (Pontifícia Universidade Católica do Rio de Janeiro), W. O. I. Bohorquez
(Universidade Federal de Juiz de Fora )
11:00 0320 COMB22
Optical laser diagnostics and chemical kinetics investigation of laminar flame speed
for hydrous ethanol, F. Martins, C. Andrade, P. Lacava, L. R. dos Santos, M. E.
Sbampato, L. G. Barreta (Instituto Tecnológico de Aeronáutica)
11:20 0339 COMB23 Simulation of a piloted jet flame (Sandia Flame D) using Fluent®, M. Deodat, A. de
Kom, S. Siroshni (University of Suriname)
11:40 0566 COMB24 CFD modelling of Delft III Flame under acoustic forcing, R. Alves (Technische
Universität Dresden), A. Santos (SENAI-CIMATEC)
12:00 Lunch
TIME CODE Chemical Kinetics and Modeling
13:30 0618 COMB25
Carbon monoxide combustion simulations by reduced mechanism, R. Sehnem, R. S.
Quadros (Universidade Federal de Pelotas), A. de Bortoli (Universidade Federal do
Rio Grande do Sul)
13:50 0627 COMB26
An approximate model for the gases propagation with reaction emitted from a
thermoelectric plant - Part 2, E. Chiaramonte (Universidade Federal do Pampa), R.
Garcia (Universidade Federal do Rio Grande do Sul), E. Prado, S. Meth
(Universidade Federal do Pampa)
14:10 0722 COMB27
Implementation of FGM technique in the open source package OpenFOAM to solve a
non premixed laminar flame, L. Maders, C. A. Hoerlle, F. Pereira, (Universidade
Federal do Rio Grande do Sul)
14:30 1049 COMB28
Numerical simulations of ethanol pool fires of different aspect ratios inside a
compartment using Fire Dynamics Simulator, F. R. Centeno, C. Fernandes
(Universidade Federal do Rio Grande do Sul)
14:50 1422 COMB29
Methodology for burner design – Combustion of pyrolysis gas from charcoal
production, N. G. B. Gomes, W. Bizzo, R. G. dos Santos, D. Carvalho, D. Medeiros, J.
Chavez (Universidade Estadual de Campinas)
15:10 1464 COMB30
Analysis of merged reaction mechanisms in an internal combustion engine using C
gasoline, B. S. de Lima, R. M. de Oliveira, G. M. A. Carvalho, A. Delfim, B. Murta
(Universidade Federal de Minas Gerais)
15:30 1920 COMB31
Effects of ADN addition on composite solid propellant formulations, T. P. Pantoja, I.
Silva (Universidade Federal do Pará), R. Gonçalves (Instituto Tecnológico de
Aeronáutica)
21
ORAL SESSION WED / 6
COMB - Combustion and Environm. Eng. (Room 5 – Bldg. 4 / Laranja)
TIME CODE Environmental Engineering
8:30 0701 COMB32
Numerical determination of the coefficient of heat transfer by convection between
coverage and external environment in a small solar chimney, D. S. S. Machado, J. O.
C. Silva, J. A. D. Silva, C. Maia (Pontifícia Universidade Católica de Minas Gerais)
8:50 0792 COMB33
Estimation of LHV, released heat and exergy of a combustion reaction of spent coffee
and eucalyptus wood chips, A. L. S. Moscato (Instituto Federal do Paraná), S. R.
Oliveira (Universidade Estadual Paulista)
9:10 1708 COMB34
Experimental study of dispersion of toluene on non-saturated phase of the soil – Part
2, E. Chiaramonte (Universidade Federal do Pampa), R. Garcia (Universidade Federal
do Rio Grande do Sul), S. Meth, E. Prado (Universidade Federal do Pampa)
9:30 1996 COMB35
Development and characterization of a constant volume sampling for PM diesel
engines, A. R. A. Achy, J. A. S. Silva, W. Souza, G. G. Demetino (Universidade Federal
da Bahia), L. C. Soares Jr, V. Ferreira (Universidade Federal do Recôncavo da Bahia),
A. C. Regis, I. M. Pepe (Universidade Federal da Bahia)
9:50 2114 COMB36
Experimental analysis of the influence of automotive air conditioning in fuel
consumption in light duty vehicles, I. Dias, L. Leal, R. M. Valle (Universidade Federal de
Minas Gerais), P. Furtado Filho, M. D. B. Ferreira (Centro de Inovação e Tecnologia
SENAI)
10:10 Coffee-break
TIME CODE Environmental Engineering
10:40 2252 COMB37
Study of calcium looping technology for carbon capture, K. Vieira, I. Ávila
(Universidade Estadual Paulista), G. L. A. A. Ferrufino, T. S. Neto (Instituto Nacional de
Pesquisas Espaciais)
11:00 2510 COMB38
Sensitivity study for a well blowout lagrangian model at campos basin using MOHID
platform, J. Lugon, P. Paiva, J. A. F. da Silva (Instituto Federal de Ciência e Tecnologia
Fluminense), A. S. Neto (Universidade Estadual do Rio de Janeiro)
11:20 2694 COMB39 Vortex tube equipped system for reducing emissions of underground storage tanks
hydrocarbons, C. A. O. Cabral, G. Stanescu (Universidade Federal do Paraná)
11:40 2744 COMB40
Analysis of the performance of a porous radiant burner using alumina (Al2O3) spheres
of 4 and 13mm in function of two thermal insulators, M. Veras (Universidade Federal
do Ceará), J. Duarte (Universidade de Fortaleza), C. A. Holanda (Universidade Federal
do Ceará)
12:00 Lunch
TIME CODE Combustion, Pirolisis and Gasification of Solids and Liquids
13:30 0100 COMB41 Energetic potential of plastic residues, S. Carvalho, J. S. Pessoa Filho, C. Apolinário Jr.,
L. Barbosa, V. L. Borges (Universidade Federal de Uberlândia)
13:50 0428 COMB42 Influence of correlation between OEC and acoustic excitation in natural gas flames, A.
Santos (SENAI CIMATEC), A. R. B. Pereira (SENAI), L. Silva (SENAI CIMATEC)
14:10 0808 COMB43
Experimental study of a lean premixed turbulent swirling flame stabilization, L. F. F. da
Silva, C. S. Mergulhão, L. Piton (Pontifícia Universidade Católica do Rio de Janeiro), P.
Scouflaire, N. Darabiha (Université Paris-Saclay, France)
14:30 1271 COMB44
Fluidized bed combustion of char pellets made from blends of shrubs and cork
residues, E. Marques,, C. Pereira, J. Paiva (Polytechnic of Viseu, Portugal), T. Ferreira,
C. Pinho (Universidade do Porto, Portugal)
14:50 1593 COMB45
Experimental study of laminar non premixed ethylene/air flames using laser induced
incandescence and fluorescence, J. J. Cruz Villanueva, L. F. Figueira da Silva (Pontifícia
Universidade Católica do Rio de Janeiro), A. Fuentes (Universidad Técnica Federico
Santa Maria, Chile)
15:10 1601 COMB46
Implementation of the Flamelet-Generated-Manifold (FGM) for premixed turbulent
flames, A. C. Contini, C. A. Hoerlle, L. Maders, F. Pereira (Universidade Federal do Rio
Grande do Sul), L. Zimmer (Ryerson University)
15:30 1830 COMB47
Numerical studies of fuel-rich micro combustion: effect of N2 dilution on NOx
emissions, P. Resende (Universidade Estadual de São Paulo), C. Pinho (Universidade
do Porto, Portugal), M. Ayoobi (Wayne State University, USA), A. Afonso
(Universidade do Porto, Portugal)
15:50 0668 COMB48
Characterization of residual biomass from agricultural and agroindustrial activities, A.
Durante, P. Curto-Risso, N. Tancredi, A. Amaya, G. P. Vergara (Universidad de la
República, Uruguay)
22
ORAL SESSION MON / 4
DYNM1 - Dynamics, Control, Vibrations and Acoustics (Aud. 5 – Gregor Mendel - Bldg. 3 / Verde) TIME CODE Acoustics
8:30 0274 DYNM1 Boundary integral solution of sound propagation and scattering in non-uniform potential
flows with a numerical Green’s function, S. Mancini, V. Rosa (Universidade de Southampton)
8:50 0329 DYNM2 A Study on Mineral Wools Acoustic Double Porosity Materials, G.P. Zanoni, R. Zoppi, A. Serpa
(Universidade Estadual de Campinas)
9:10 0393 DYNM3 Ultrasound reflection from immersed laminates and its application in adhesive bond
inspections, B. Junqueira, D. Castello, R. Leiderman (Universidade Federal do Rio de Janeiro)
9:30 1082 DYNM4
Fractional order calculus applied to generalize the Rott's linear thermoacoustics: an
investigation toward energy regeneration in automobiles, C. A. Valentim Jr., F. Bannwart
(Universidade Estadual de Campinas), S. A. David (Universidade de São Paulo).
9:50 1753 DYNM5 Multivariate Analysis Applied to Noise Problem of Compressors, Déborah Reis, F. do C. S.
Vanzo, J. Reis, M. A. Duarte (Universidade Federal de Uberlândia).
10:10 Coffee-break
TIME CODE Acoustics and vibroacoustics
10:40 1924 DYNM6 Prediction of sound propagation effects of installed jet configurations at subsonic operating
conditions, R.G. da Fonseca, T. H. G. Lobato, L. Bastos (Universidade Federal do Pará)
11:00 2686 DYNM7
Numerical and analytical analysis of transmission loss of panels with insertion of Helmholtz
resonators and porous material, M. Veloso, A. Lenzi, W. Santos (Universidade Federal de
Santa Catarina)
11:20 0592 DYNM8 Two-dimensional ultrasound transducer array for acoustic radiation force impulse imaging, D.
Santos, F. Cardoso., S. Furuie (Universidade de São Paulo)
11:40 1572 DYNM9
Analysis of vehicle interior noise correlation to road traffic accidents caused by driver
sleepiness, A. Delfim, G.M. de A. Carvalho, B. Murta, B. S. de Lima (Universidade Federal de
Minas Gerais)
12:00 2358 DYNM10 Wave propagation and frequency band structure in cylindrical shells, F. N. Pereira, J. M. C.
dos Santos (Universidade Estadual de Campinas)
12:20 Lunch
TIME CODE Acoustics and vibroacoustics, Control
13:30 2097 DYNM11
Evaluation of pipe silencers efficiency with internal geometry optimized for noise control in
specific frequency ranges using the finite element technique, B. Marangoni, I. N. C. Nunez, R.
H. de Oliveira Filho (Universidade Federal do Triângulo Mineiro)
13:50 2565 DYNM12
Vibration’s impact on worker when using industrial machine, H. Augusto (Universidade
Federal de Minas Gerais), J. de S. Ramos (Universidade Estadual do Rio de Janeiro), B. A. L.
M. Pereira (Faculdade Pitágoras), L. Pinto (Pontifícia Universidade Católica de Minas Gerais),
J. C. de Jesus (Faculdade Pitágoras)
14:10 0107 DYNM13 Behavior of H_inf and H_2 norms as objective functions in the positioning of active elements
in vibration control, A. L. Soubhia, A. Serpa (Universidade Estadual de Campinas)
14:30 0173 DYNM14
Active vibration control of a flexible structure by using generalized predictive control, E.
Taketa, D.A. Colombo, F. A. Lara-Molina, E. H. Koroishi (Universidade Tecnológica Federal
do Paraná)
14:50 0324 DYNM15 Robust control of a non-minimum phase multivariable system, D.B. Rossato (Instituto
Tecnológico de Aeronáutica)
15:10 0394 DYNM16
Maneuvering and control of vector tugs in maritime simulators – an actuation model
subjected to hydrodynamic and wind effects during pull operations, R. D. Barrera, E. A.
Tannuri (Universidade de São Paulo)
15:30 1115 DYNM17
Robust control applied to a beam of composite material using electromagnetic actuators, C.
A. X. da Silva, D. A. Colombo, F. A. Lara-Molina, E. H. Koroishi, A. Faria (Universidade
Tecnológica Federal do Paraná)
23
ORAL SESSION TUE / 5
DYNM1 - Dynamics, Control, Vibrations and Acoustics (Aud. 5 – Gregor Mendel - Bldg. 3 / Verde) TIME CODE Control
8:30 1173 DYNM18
Vibration suppression of strongly nonlinear structure by means of nonlinear switching shunt
circuits, T. M. P. Silva (Universidade de São Paulo), M. Clementino (Escola de Engenharia de
São Carlos), V. C. de Sousa, D. D'Assunção (Universidade de São Paulo), W. Vieira (Escola de
Engenharia de São Carlos), C. De Marqui Jr. (Universidade de São Paulo), J.A. de C. Dias
(Escola de Engenharia de São Carlos)
8:50 1206 DYNM19
Optimum design of a set of dynamic neutralizers to passive vibration control considering
physical parameters, location and viscoelastic material variable, F. Silva, C.A. Bavastri
(Universidade Federal do Paraná)
9:10 1343 DYNM20 Control of pneumatic valves with friction using algebraic estimators, G. S. Vicinansa, C. Garcia,
P. S. P. da Silva (Universidade de São Paulo)
9:30 1453 DYNM21 LQR control for a self-balancing unicycle, G. P. das Neves, B. A. Angélico(Universidade de
São Paulo)
9:50 1612 DYNM22 Inverted pendulum damper design parameters for vibration control in tall buildings, P. B.
Júnior, M. V. G. de Morais, S. Avila (Universidade de Brasília)
10:10 Coffee-break
TIME CODE Control
10:40 1615 DYNM23
Model predictive control applied to waypoint-based guidance with obstacle avoidance of an
unmanned aircraft, L. J. T. de Oliveira, D. A. dos Santos (Instituto Tecnológico de
Aeronáutica)
11:00 1934 DYNM24
Comparison of Fuzzy Type-2 and Conventional Fuzzy Controllers Tuned by Ant Colony
Optimization, F. M. U. de Araújo, M. S. F. F. Cavalcante, B. Vasconcellos, W. Mendes
(Universidade Federal do Rio Grande do Norte)
11:20 2023 DYNM25 Fault-tolerant control of an underactuated system using a generalization of the LQG/LTR
method, E. Madalena. , K. H. Kienitz (Instituto Tecnológico de Aeronáutica)
11:40 2051 DYNM26
Vibration control of smart structures with a fuzzy sliding mode control scheme, P. Medeiros,
W. M. Bessa (Universidade Federal do Rio Grande do Norte), M. Savi (Universidade Federal
do Rio de Janeiro), A. S. de Paula (Universidade de Brasília)
12:00 Lunch
TIME CODE Control
13:30 2271 DYNM27 Hybrid bipolar stepper motor control by variable gain PID controller, I. C. Silveira, R. A. C.
Laranja (Universidade Federal do Rio Grande do Sul)
13:50 2455 DYNM28 Sliding mode control of a flexible rotating system subject to concentrated dry friction, A. D.
Santos (Universidade de São Paulo), A. Fleury (Centro Universitário da FEI)
14:10 2671 DYNM29 Controller by mixed-sensitivity H∞ design (S/KS/T) for Lurie type systems, R. Pinheiro, D.
Colón (Universidade de São Paulo)
14:30 0843 DYNM30 Heavy-duty truck Platooning: A Review, A. de S. Mendes (Escola Politécnica da Universidade
de São Paulo), A. Fleury, Marko Ackermann, F. Leonardi (Centro Universitário da FEI)
14:50 0859 DYNM31
Velocity and posture selection for torque optimization in manipulators with two-dimensional
force requirements, D. G. G. Rosa, M. A. Meggiolaro (Pontifícia Universidade Católica do Rio
de Janeiro), J. F. S. Feiteira (Universidade Federal Fluminense)
15:10 -- -- --
15:30 -- -- --
24
ORAL SESSION WED / 6
DYNM1 - Dynamics, Control, Vibrations and Acoustics (Aud. 5 – Gregor Mendel - Bldg. 3 / Verde) TIME CODE Dynamics
8:30 0157 DYNM32
Damage detection in a cantilever beam by a stochastic optimization algorithm through the
variation of the natural frequencies, G. Zeni, L. Miguel (Universidade Federal do Rio Grande
do Sul), L. F.Miguel (Universidade Federal de Santa Catarina)
8:50 0198 DYNM33
A Numerical Methodology for Designing a Viscoelastic Vibration Neutralizer with Tubular
Geometry and Constrained Layers, E. M. O. Lopes, I. F. Rodrigues, J. Pereira, (Universidade
Federal do Paraná)
9:10 0293 DYNM34
Analysis of blade distribution for less static unbalance, J. C. Petras, R. Viale (Universidad
Tecnologica Nacional Facultad Regional Avellaneda), G. D. Silveira, J. T. Voukelatos
(Universidad Tecnologica Nacional)
9:30 0396 DYNM35
Optimal placement of sensors for the output feedback control of structures using quadratic
performance criterion, H. Cruz (Universidade de São Paulo), M. A. Trindade (Escola de
Engenharia de São Carlos)
9:50 0533 DYNM36
Adaptive enrichment of the generalized finite element method based on the friberg error
indicator, M. Malacarne, M. Arndt, R. D. Machado, P. Weinhardt, T. Petroli (Universidade
Federal do Paraná)
10:10 Coffee-break
TIME CODE Dynamics
10:40 0535 DYNM37 The Generalized Finite Element Method applied to dynamic transient analysis, L. C. Debella,
M. Arndt, R. D. Machado (Universidade Federal do Paraná)
11:00 0554 DYNM38
Numerical analysis of new superelastic SMA dampers for mechanical vibration control in rotor
system, R. Senko (Universidade Federal da Paraíba), C. J. de Araujo (Universidade Federal de
Campina Grande), M. C. Rodrigues (Universidade Federal da Paraíba), A. A. Silva
(Universidade Federal de Campina Grande)
11:20 0645 DYNM39 Impedance control for assistance in cargo handling, F. Leonardi, S. Monteiro, S. Delijaicov, M.
Ackermann, F. Leonardi (Centro Universitário da FEI)
11:40 0901 DYNM40
Evaluation of a smartphone effectiveness as an inexpensive tool for vibration analysis in
vehicular comfort, R. M. K. Cargnin, G.K. Lunkes, C. E. de Souza (Universidade Federal de
Santa Maria)
12:00 Lunch
TIME CODE Dynamics
13:30 0932 DYNM41 Inverse stochastic identification of unmanned parachute launching point, D. Sousa, A. B.
Caldeira, D. L. Fernandes (Instituto Militar de Engenharia)
13:50 0992 DYNM42 Experimental bench for evaluation of whole body vibration in automotive seats, H. F. Moore
(Universidade de Brasília)
14:10 1050 DYNM43 Influence of the discretization method on the performance of state observers applied in a
rotating system, L. Oliveira, G. P. de Melo (Universidade Estadual Paulista)
14:30 1154 DYNM44 The influence of speed and slope angle on wheelchair propulsion patterns: an optimal control
study, M. Ackermann, V. I. Cuerva, F. Leonardi (Centro Universitário da FEI)
14:50 1261 DYNM45 Modeling and simulation of an aircraft hybrid-wing tilt, J. L. Moreira (Universidade Federal
Rural do Semi-arido)
15:10 1450 DYNM46 Dimensionless factors to design hydropneumatic suspension systems, W. H. C. Sanchez, E. L.
F. Fortaleza (Universidade de Brasília), A. Benine Neto (University of Bordeaux, France)
15:30 1697 DYNM47
A comparison between on-axis and off-axis measurements during machining operations, A.
R. Raposo (Escola de Engenharia de São Carlos), L. de Oliveira (Universidade de São Paulo),
A. L. de Mello (Escola de Engenharia de São Carlos), R. Coelho, R. G. dos Santos
(Universidade de São Paulo)
25
ORAL SESSION THU / 7
DYNM1 - Dynamics, Control, Vibrations and Acoustics (Aud. 5 – Gregor Mendel - Bldg. 3 / Verde) TIME CODE Dynamics
8:30 1937 DYNM48 Analysis of a dynamic system subjected to an impulsive and internal contact force, G. S.
Rodrigues, H. I. Weber (Pontifícia Universidade Católica do Rio de Janeiro)
8:50 2033 DYNM49
Evaluation of statistical energy analysis parameters through finite element method applied to
structures employed in naval applications, J. Guimarães, G. Quixaba, N. Soeiro, L. Bastos
(Universidade Federal do Pará)
9:10 2053 DYNM50 The influence of a crack in the dynamic behavior of a flexible disc, B. Rende, I. B. da Silva, T.
Morais, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia)
9:30 2082 DYNM51
Predictive maintenance based on mechanical unbalance severity analysis of rotating
machines, D. Martins, T. de M. Prego, A. Lima , D. Hemerly, F. L. e Silva (Centro Federal de
Educação Tecnológica Celso Suckow da Fonseca)
9:50 2087 DYNM52 Experimental validation of robust model based balancing approach, V. Carvalho, A. Dourado,
A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia)
10:10 Coffee-break
TIME CODE Dynamics
10:40 2099 DYNM53 A numerical investigation on near-field acoustic levitation, F. M. Ferreira Jr, G. Zuffi, F. Lobato,
P. P. R. Nishida, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia)
11:00 2107 DYNM54 Modeling of an impact damper submitted to forced vibration from a nonlinear contact force
mode, M. Albuquerque, R. Pederiva (Universidade Estadual de Campinas)
11:20 2260 DYNM55 Movement analysis: using video image, F. Aureliano, R. C. Carvalho (Centro Universitário do
Sul de Minas), A. Lopes (Universidade Federal de Itajubá)
11:40 2347 DYNM56 Modal parameters identification methods based on output-only, J. T. de Souza, N. Barbieri
(Pontifícia Universidade Católica do Paraná)
12:00 Lunch
TIME CODE Dynamics, Multibody Systems, Nonlinear Dynamics
13:30 2348 DYNM57 Identification and diagnosis of damage in automotive gearbox, G. S. V. Barbieri, N. Barbieri, B.
Martins, L. Barbieri (Pontifícia Universidade Católica do Paraná)
13:50 2372 DYNM58
Theoretical and experimental analysis of hydrodynamic and thermohydrodymic models of
cylindrical bearings, J. Barbosa, L. Sicchieri, A. Dourado, A. A. Cavalini Jr, V. Steffen Jr
(Universidade Federal de Uberlândia)
14:10 5951 DYNM59 Dynamic Analysis of a Geodesic Dome, L. Barbieri, N. Barbieri (Pontifícia Universidade
Católica do Paraná), R. D. Machado (Universidade Federal do Paraná)
14:30 0405 DYNM60
Mechanical efficiency determination of a dedicated hybrid transmission using graph and
screw theories: a case study, M. B. de Souza, R. de S. Vieira, D. Martins, H. Cazangi
(Universidade Federal de Santa Catarina), L. P. Laus (Universidade Tecnológica Federal do
Paraná)
14:50 1054 DYNM61 Modeling of a 4-DOF control moment gyroscope, F. Y. Toriumi, B. A. Angélico, R. S. Barbosa,
F. Martins, T. A. H. Coelho (Universidade de São Paulo)
15:10 0831 DYNM62 A neural genetic hybrid model for eigenstructure allocation in the LQR project in DFIG, R.
SILVA (Instituto Federal de Educação, Ciência e Tecnologia do Maranhão)
15:30 -- -- --
26
ORAL SESSION FRI / 8
DYNM1 - Dynamics, Control, Vibrations and Acoustics (Aud. 5 – Gregor Mendel - Bldg. 3 / Verde) TIME CODE Vehicle Dynamics
8:30 0275 DYNM63
Optimization of vertical and lateral vehicle's dynamic response to different road profile
irregularities using a quantum particle swarm optimizer, H. Gomes (Universidade Federal do
Rio Grande do Sul), L. Coelho (Pontifícia Universidade Católica do Paraná)
8:50 0286 DYNM64 Self-powered active suspensions on smart vehicles, J. V. P. da Silva, J. C. Pereira (Universidade
Federal de Santa Catarina)
9:10 0779 DYNM65 Comparison of rear or central bumper in motorcycles, F. Andrade (Pontifícia Universidade
Católica de Minas), C. Vimieiro (Universidade Federal de Minas Gerais)
9:30 1153 DYNM66 Modeling of electronic differential system for vehicles with rear wheel drive, R. Y. Yamashita, F.
M. Santiciolli , J. Eckert, E. Bertoti, F. G. Dedini, L. Silva (Universidade Estadual de Campinas)
9:50 1858 DYNM67
Effects of coil spring three dimensional stiffness on freight wagon lateral behavior, L. B.
Baruffaldi (Instituto Federal de Educação, Ciência e Tecnologia de São Paulo), G. F. M. dos
Santos (Universidade Federal do Espírito Santo), A. A. dos Santos Jr (Universidade Estadual
de Campinas)
10:10 Coffee-break
27
ORAL SESSION WED / 6
DYNM2 - Dynamics, Control, Vibrations and Acoustics (Room 4 – Bldg. 4 / Laranja) TIME CODE Rotordynamics
8:30 0116 DYNM68
Identification of dynamic coefficients in a journal bearing from experimental unbalance
responses and inverse problem, A. Miliavacca, C. A. Bavastri (Universidade Federal do
Paraná)
8:50 0178 DYNM69 Electric vehicle fan balancing variation according to speed, R. Moraes, T. Rolim
(Universidade Federal de Pernambuco)
9:10 0366 DYNM70 Analysis of the bearings’ influence on the dynamic behavior of a rotating machine, C.
Rother, T. Machado (Universidade Estadual de Campinas)
9:30 0796 DYNM71
Experimental identification of unbalance and shaft bow in a laval rotor by means of
correlation analysis and model order reduction, F. D. Sanches (Universidade Federal do
Rio Grande do Norte), R. Pederiva (Universidade Estadual de Campinas)
9:50 0802 DYNM72 Influence of cavitation effects in hydrodynamic bearings on rotor’s dynamic behavior, D.
J. Ramos, G. B. Daniel (Universidade Estadual de Campinas)
10:10 Coffee-break
TIME CODE Rotordynamics
10:40 0809 DYNM73 Fault diagnostic for rotating machines using Bayesian networks, N. Tyminski, H. F. de
Castro (Universidade Estadual de Campinas)
11:00 1000 DYNM74 Evaluation of texturing effects on hydrodynamic behavior of journal bearings, L. I.
Ramos, G. B. Daniel (Universidade Estadual de Campinas)
11:20 1010 DYNM75
On the whirling direction of a probabilistic, undamped and asymmetric laval rotor model
subjected to residual unbalance, A. Jambersi, S. da Silva, J. Pereira, A. Turra
(Universidade Estadual Paulista Julio de Mesquita Filho)
11:40 1486 DYNM76 Evaluation of a multilevel algorithm to study the hydrodynamic behavior of journal
bearings, L. I. Ramos, G. B. Daniel (Universidade Estadual de Campinas)
12:00 Lunch
28
ORAL SESSION THU / 7
DYNM2 - Dynamics, Control, Vibrations and Acoustics (Room 4 – Bldg. 4 / Laranja) TIME CODE Rotordynamics
8:30 1956 DYNM77 Experimental validation of an onboard rotor FEM model, M. S. Sousa Jr, V. T. S. D. Claro, A. A.
Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia)
8:50 2071 DYNM78
Numerical and experimental analysis of a cracked shaft based on static and dynamic
responses, I. B. da Silva, T. Morais, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de
Uberlândia)
9:10 2073 DYNM79 A comparison between composite rotordynamics modeling theories, P. C. P. de F. Barbosa, V.
T. S. D. Claro, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia)
9:30 2118 DYNM80 A shell based FEM model for thick walled composite rotors, V. T. S. D. Claro, P. C. P. de F.
Barbosa, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia)
9:50 -- -- --
10:10 Coffee-break
TIME CODE Structural Dynamics
10:40 0260 DYNM81 Investigation of whole body vibration in an industrial plant: comfort and health
measurements, H. Gomes, N. Osores (Universidade Federal do Rio Grande do Sul)
11:00 0583 DYNM82 Damage detection on aluminum beams using vibration-based method and artificial neural
networks, H. Gomes, N. Osores (Universidade Federal do Rio Grande do Sul)
11:20 1042 DYNM83 Application of the differential transform method in mechanical vibration problems, A. Ribeiro
(Universidade Federal de Itajubá)
11:40 -- -- --
12:00 Lunch
TIME CODE Structural Dynamics
13:30 1332 DYNM85 Effects of linear resonators on the aeroelastic behavior of a plate-like wing, J. H. R. Dainezi, C.
de Marqui Jr (Universidade de São Paulo)
13:50 1375 DYNM86 Free vibration isogeometric analysis of CAD mapped trusses, M. Rauen, R. D. Machado, M.
Arndt (Universidade Federal do Paraná)
14:10 1535 DYNM87
Identification of three-dimensional equivalent material properties for laminated disks pack of
electric machine stators with stress-stiffening effect, J. C. Marcon, A. Lenzi, O. M. Silva
(Universidade Federal de Santa Catarina)
14:30 1952 DYNM88 Identification of modals parameters of transmission line cable, M. Calado, N. Barbieri, G. de S.
V. Barbieri, M. J. Mannala (Pontifícia Universidade Católica do Paraná)
14:50 1982 DYNM89 Band gaps in plates and cylindrical shells with 1D periodic elastic properties, R. Sousa, J.-M.
Mencik, J. M. C. dos Santos (Universidade Estadual de Campinas)
15:10 2685 DYNM90 Suspension optimization for a electrical machine assembled in a rigid base panel, A. Lenzi
(Universidade Federal de Santa Catarina), A. A. P. Sarda (Universidade Federal do Paraná)
15:30 -- -- --
29
ORAL SESSION THU / 7
ENACEM - Education Symposium (Room 1 – Bldg. 4 / Laranja) TIME CODE ENACEM
13:30 Invited Avaliação quadrienal 2013-2016 dos programas de pós-graduação das Engenharias III, E. N.
Mamiya (Universidade de Brasília)
14:10 0538 ENACEM1 Leading engineers to the future: an artificial intelligence approach for engineering creativity
support, L. F. de C. Botega, J. Silva (Universidade Federal de Santa Catarina)
14:30 2445 ENACEM2
Fast Girls Project: Encouraging girls in STEM, D. M. Viana, B. X. de M. do Nascimento, E.
Sakazaki, L. Matos, M. O. Ananias, A. S. de Paula , M. A. M. Shzu, S. Avila, V. Costa, G.
Lopes, I. Cristian, K. Lima, K. A. Costa, S. Ferreira, T. M. C. de Almeida (Universidade de
Brasília)
14:50 1364 ENACEM3 Risk analysis in chemistry laboratory, K. C.O.Marques, A. Dias, L. S. Yoshida, A. T. de Siqueira
Neto (Universidade Federal de Santa Catarina)
15:10 1681 ENACEM4
Bicycles and motorcycles as an educational object for modeling, analysis and simulation of
stability, speed, suspensions, attitude and trajectory control, M. Speranza N., M. Assad, V. S.
Medeiros (Pontifícia Universidade Católica do Rio de Janeiro)
15:30 2278 ENACEM5 A Study on polygonal turning, L. Oliveira (Universidade Federal de Santa Maria), J.
Cavalcante (Bruning Tecnometal Ltda.), L. Oliveira (Universidade Federal de Santa Maria)
30
ORAL SESSION MON / 4
ENTS1 - Energy and Thermal Sciences (Room 6 - Bldg. 4 / Laranja)
TIME CODE Applied Heat and Mass Transfer
8:30 0242 ENTS1
Analytical solution for the transient heat transfer problem with variable source term
in a nuclear fuel rod, F. A. Soares, P. Araujo, F. Scofano, N. R. Guedes (Instituto
Militar de Engenharia)
8:50 0276 ENTS2 Analysis of turbulence-radiation interaction in a methane-air diffusion flame, F.
França, G. Fraga, A. P. Petry (Universidade Federal do Rio Grande do Sul)
9:10 0591 ENTS3
Effects of turbulence-radiation interaction in a non-premixed turbulent methane-air
flame, F. França, L. D. Lemos, F. R. Centeno (Universidade Federal do Rio Grande
do Sul)
9:30 0624 ENTS4
Experimental investigations of turbulence promoters applied to heat transfer
applications, R. Gontijo, A. Júnior (Universidade Estadual de Campinas), T. S.
Ferreira (Universidade de Brasília)
9:50 0793 ENTS5 Experimental analysis of the transient behavior of an engine cooling radiator, C.
Albuquerque N., K. Rodrigues, J. Schiavon, L. Novazzi (Centro Universitário da FEI)
10:10 Coffee-break
TIME CODE Applied Heat and Mass Transfer
10:40 0857 ENTS6
Application of the weighted-sum-of-gray-gases model to non-homogeneous
H2O/CO2 mixtures for media with non-gray walls, F. França, R. J. C. da Fonseca
(Universidade Federal do Rio Grande do Sul)
11:00 1017 ENTS7
Numerical and experimental analysis of a small scale apparatus to studies the
thermal performance of reflexive insulation to building roofings, S. Guths
(Universidade Federal de Santa Catarina), C. Michels (Universidade Federal do
Amazonas), R. R. Storm (Universidade Federal de Santa Catarina)
11:20 1025 ENTS8
WSGG correlations based on HITEMP2010 for computation of radiation in high
pressure conditions, F. França, F. R. Coelho (Universidade Federal do Rio Grande do
Sul)
11:40 1079 ENTS9
Experimental validation of an AMR model for magnetic field - fluid flow
synchronization analysis, A. Nakashima, S. L. Dutra, P. Trevizoli, J. Barbosa
(Universidade Federal de Santa Catarina)
12:00 Lunch
TIME CODE Applied Heat and Mass Transfer
13:30 1119 ENTS10
Influence of the heat transfer characteristics of a helical coil on the water
consumption and cooling time of home-brewed wort, R. G. Oliveira, P. N. Rubbo
(Universidade Federal de Santa Catarina)
13:50 1150 ENTS11 Comparison of different thermal models to estimate thermal properties, R. G.
Oliveira, P. N. Rubbo (Universidade Federal de Santa Catarina)
14:10 1170 ENTS12
Experimental research of capillary structures technologies for heat pipes, T. A. Alves,
L. Krambeck, G. A. Bartmeyer, D. Fusão, P. H. D. dos Santos (Universidade
Tecnológica Federal do Paraná)
14:30 1248 ENTS13
Analysis of heat transfer in steel billets during transport, K. N. Cançado, K. N.
Cançado (Centro Federal de Educação Tecnológica de Minas Gerais), L. N. Soares
(Universidade Federal de Minas Gerais)
14:50 1345 ENTS14 Heat transfer study in a CSP volumetric receiver for different porosities, T. S. da Silva,
L. Thomazini, P. M. Guimarães (Universidade Federal de Itajubá)
15:10 1354 ENTS15
Coefficient estimation for heat transfer on vegetable macroporous media, P. S.
Schneider (Universidade Federal do Rio Grande do Sul), A. Urquiola (Universidad
de la República), G. Alvarez (Institut national de recherche en sciences et
technologies pour l'environnement et l'agriculture), D. Flick (AgroParisTech), P.
Curto-Risso (Universidad de la República)
15:30 1549 ENTS16
Convective and absolute instability in a porous medium with inclined temperature
gradient, horizontal and vertical through flow, M. Schuabb, L. S. de B. Alves
(Universidade Federal Fluminense)
31
ORAL SESSION TUE / 5
ENTS1 - Energy and Thermal Sciences (Room 6 - Bldg. 4 / Laranja)
TIME CODE Applied Heat and Mass Transfer
8:30 1587 ENTS17
Using electrovalves as a flow distribution system for an active magnetic regenerator,
S. L. Dutra, A. Nakashima, G. Hoffmann, J. Lozano, J. Barbosa (Universidade Federal
de Santa Catarina)
8:50 1642 ENTS18 Review of frost density models over cold flat surfaces, A. R. A. Colmanetti (Escola de
Engenharia de São Carlos), L. C. Gómez, C. Tibiriçá (Universidade de São Paulo)
9:10 1648 ENTS19
Wind influence in inspections by infrared thermography of concrete structures with
anomalies, M. Milanez, S. Guths,I. J. Padaratz (Universidade Federal de Santa
Catarina)
9:30 1836 ENTS20
Integral transform of transient micropolar fluid MHD flow between parallel porous
vertical walls with radiation, H. K. Miyagawa, F. Pontes, I. Curcino (Universidade
Federal do Pará), P. Pontes (Universidade Federal do Rio de Janeiro), E. Macêdo, J.
Quaresma (Universidade Federal do Pará)
9:50 2068 ENTS21 Conductive pathways construction using genetic algorithm and constructal design, P.
A. Montoya, J. A. Souza, D. Adamatti (Universidade Federal do Rio Grande - FURG)
10:10 Coffee-break
TIME CODE Applied Heat and Mass Transfer
10:40 2122 ENTS22 Heat conduction in starch hydrolysis of barley malt in a cylindrical mashing vessel, L.
A. Sphaier, L. Zamboni, B. L. de Aguiar (Universidade Federal Fluminense)
11:00 2168 ENTS23 Mathematical modelling of macrosegregation in ingot casting, M. de O. Assunção Jr
(Universidade de São Paulo), M. Vynnycky (Royal Institute of Technology)
11:20 2410 ENTS24
Comparative energetic efficiency of materials for building flat roofs, P. I. B. de
Queiroz, J. E. Ramis, A. G. Azevedo, E. L. Neto (Instituto Tecnológico de
Aeronáutica)
11:40 2567 ENTS25
Thermal performance of a heat pump with solar evaporator in sunny environments,
H. Augusto (Universidade Federal de Minas Gerais), F. N. Q. dos Santos (Centro
Federal de Educação Tecnológica de Minas Gerais), J. J. G. Pabon, R. Koury, L.
Machado (Universidade Federal de Minas Gerais)
12:00 Lunch
TIME CODE Applied Heat and Mass Transfer
13:30 2575 ENTS26
Thermal performance analysis of a heat pump with solar evaporator, H. Augusto, A.
A. Machado, O. R. S. Rodriguez, I. Z. L. Meyer (Universidade Federal de Minas
Gerais), N. Oliveira (Pontifícia Universidade Católica de Minas Gerais)
13:50 2583 ENTS27
Design of an finned tube evaporator with cross-flow for a refrigeration machine
operating with CO2 in subcritical cycle, H. Augusto, C. H. N. da Silva, I. Z. L. Meyer
(Universidade Federal de Minas Gerais), G. Gama, L. Pinto (Pontifícia Universidade
Católica de Minas Gerais)
14:10 2670 ENTS28
Test of two phase change materials for thermal energy storage, Carlos Pinho
(Faculdade de Engenharia da Universidade do Porto), Luis Esteves (Faculdade de
Engenharia da Universidade do Porto), Ana Magalhaes (Instituto de Engenharia
Mecânica e Gestão Industrial), Victor Ferreira (Instituto de Engenharia Mecânica e
Gestão Industrial), Carlos Pinho (Faculdade de Engenharia da Universidade do
Porto)
14:30 2673 ENTS29
Nonlinear ARX model associated to neural networks to predict hygrothermal
behavior of building materials, C. F. da Silva, R. Z. Freire (Pontifícia Universidade
Católica), J. Virgone, A. Trabelsi (Université Claude Bernard Lyon 1)
14:50 2720 ENTS30 Thermal analysis of vsb-30 rocket payload, H. Machado (Instituto de Aeronáutica e
Espaço), F. Franciscani, L. Cavicchiolo (Universidade do Vale do Paraíba)
15:10 2911 ENTS31
Coupled integral equations approach on the transient heat transfer problem in
supercritical fluids, P. P. R. Machado (Universidade Federal do Rio de Janeiro), L. S.
de B. Alves (Universidade Federal Fluminense)
15:30 -- -- --
32
ORAL SESSION WED / 6
ENTS1 - Energy and Thermal Sciences (Room 6 - Bldg. 4 / Laranja) TIME CODE Heat and Mass Transfer Fundamentals
8:30 Invited Sweeping convection: a new convection mode by large particles, J. L. Lage (Southern
Methodist University, USA)
9:10 0368 ENTS32
An algorithm to determine radiative properties of glazing systems using simple
window performance indicators, S. R.-Castillo (Universidad del Bío-Bío), N. Mendes,
L. M. Moura (Pontifícia Universidade Católica do Paraná)
9:30 0426 ENTS33 Solution of the heat conduction in solid-state electronics by integral transforms, D.
Chalhub, L. M. Corrêa (Universidade Estadual do Rio de Janeiro)
9:50 1007 ENTS34
Improvements to the guarded hot plate apparatus to determine thermal
conductivity, S. M. M. de L. e Silva, G. Souza, L. F. dos S. Carollo, S. M. M. de L. e
Silva (Universidade Federal de Itajubá)
10:10 Coffee-break
TIME CODE Heat and Mass Transfer Fundamentals
10:40 1235 ENTS35
Convection in a lid-driven cavity subject to a gravitational stable condition: effects of
aspect ratio, I. M. Suyama, V. G. Poletto, F. C. de Lai, S. Junqueira (Universidade
Tecnológica Federal do Paraná)
11:00 1245 ENTS36
Numerical simulation of convection in a lid-driven cavity filled with heterogeneous
porous medium, A. Camargo, F. da S. Santos, V. G. Poletto, F. C. De Lai, S. Junqueira
(Universidade Tecnológica Federal do Paraná)
11:20 1266 ENTS37
Boundary layer analysis of turbulence-radiation interaction in a non-reactive
channel flow, F. França, G. Fraga, A. P. Petry (Universidade Federal do Rio Grande
do Sul)
11:40 1455 ENTS38 Evaluation of droplet evaporation models for gas-liquid flow simulations, A. P.
Pinheiro, J. M. Vedovoto, A. S. Neto (Universidade Federal de Uberlândia)
12:00 1527 ENTS39
Comparison between pennes and dual phase lag models for the bioheat transfer
around a healthy and a tumorous thyroid, T. P. da C. Bittencourt, B. Lamien
(Universidade Federal do Rio de Janeiro), L. A. B. Varon (University of Santiago de
Cali), H. Orlande (Universidade Federal do Rio de Janeiro)
12:20 Lunch
TIME CODE Heat and Mass Transfer Fundamentals
13:30 2012 ENTS40
Determination of Nukiyama and Leidenfrost temperatures for hydrocarbons using
the droplet evaporation method, M. W. Reis, A. V. da S. Oliveira, R. G. dos Santos
(Universidade Estadual de Campinas)
13:50 2089 ENTS41
Development of an experimental methodology of boiling phenomenon in the
evaporator of a glass thermosyphon, P. H. D. dos Santos, D. O. de Souza, R. M.
Davies, T. A. Alves (Universidade Tecnológica Federal do Paraná)
14:10 2163 ENTS42
Development of kinetic model for THF-hydrate formation, P. H. D. dos SANTOS, G.
N. D. Dextre, A. V. L. Machado, R. Morales, A. Sum (Universidade Tecnológica
Federal do Paraná)
14:30 2262 ENTS43 Modelling and simulation of a CPV/T system, M. M. Macias, T. H. S. Schmidt, V. de
S. Britto, T. Oliveira, A. Brasil Jr (Universidade de Brasília)
14:50 2811 ENTS44 Onset of mixed convection in an adsorptive porous medium, G. F., L. A. Sphaier, L. S.
de B. Alves (Universidade Federal Fluminense)
15:10 2917 ENTS45
Experimental setup for a bench scale multiple disks turbine (Tesla turbine), P. S.
Schneider (Universidade Federal do Rio Grande do Sul), C. E. (Universidade
Regional Integrada do Alto Uruguai e das Missões ), A. L. R. T. (Universidade
Federal do Rio Grande do Sul), C. R. (Centro Universitário La Salle), J. C. da S. F.
Vieira, G. P. Novo (Universidade Federal do Rio Grande do Sul)
15:30 6909 ENTS46 3D numerical simulations of Rayleigh-Taylor instability, B. A. Duarte, A. S. Neto
(Universidade Federal de Uberlândia)
33
ORAL SESSION THU / 7
ENTS1 - Energy and Thermal Sciences (Room 6 - Bldg. 4 / Laranja)
TIME CODE Thermo-Economic Analysis and Energy Policy
8:30 0383 ENTS47 Electrical energy matrix changes and its impacts on energetic security, R. V. C. da S.
G. Francisco, D. S. Siqueira, R. J. Silva, G. Menon (Universidade Federal de Itajubá)
8:50 0384 ENTS48
Analysis of thermal power plants cooling system in climate changes regards, R. V. C.
da S. G. Francisco , D. S.Siqueira, R. J. Silva, G. Menon (Universidade Federal de
Itajubá)
9:10 0909 ENTS49
On the improvement and accuracy in thermoeconomic diagnosis: dissipative
component and exergy disaggregation, R. A. Lorenzoni, J. J. C. S. Santos, A.
Lourenço, Jo. L. M. Donatelli (Universidade Federal do Espírito Santo)
9:30 1013 ENTS50 Comparative analysis of ORC for WHR in cement industry, F. R. P. Arrieta, L. F.
Moreira (Pontifícia Universidade Católica de Minas Gerais)
9:50 1014 ENTS51 Costs assessment in a HAT cycle, F. R. P. Arrieta, H. J. J. da Siliveira (Pontifícia
Universidade Católica de Minas Gerais)
10:10 Coffee-break
TIME CODE Thermo-Economic Analysis and Energy Policy
10:40 1078 ENTS52
Current overview and future forecasts of natural gas in the worldwide electrical
matrix, M. Q. Hilário, S. T. S. Silva, I. de O. Pereira, R. J. Silva (Universidade Federal
de Itajubá)
11:00 1083 ENTS53
Technological aspects of electric power generation from MSW, F. R. P. Arrieta, I. H. M.
da Silva, H. G. de Souza, C. A. Gomes Filho (Pontifícia Universidade Católica de
Minas Gerais)
11:20 1287 ENTS54
Experimental tests of a Stirling engine for recovery of exhaust heat waste of internal
combustion engine, L. B. Baruffaldi (Instituto Federal de Educação, Ciência e
Tecnologia de São Paulo), G. F. M. dos Santos (Universidade Federal do Espírito
Santo), A. A. dos Santos Junior (Universidade Estadual de Campinas)
11:40 -- -- --
12:00 Lunch
34
ORAL SESSION MON / 4
ENTS2 - Energy and Thermal Sciences (Room 7 - Bldg. 4 / Laranja)
TIME CODE Numerical Heat Transfer
8:30 0291 ENTS55
Study of the heat transfer processes in gas turbine blades via finite element method,
F. P. Da S. Muchick, S. Del Vecchio (Instituto Federal do Sudeste de Minas -
Campus Juiz de Fora), F. Bastos (Universidade Federal de Juiz de Fora)
8:50 0328 ENTS56 Optimization of a plate-fin heat exchanger by differential evolution approaches, D.
M. Rieger, V. Mariani, E. Martim (Pontifícia Universidade Católica do Paraná)
9:10 0463 ENTS57 3D numerical simulations of natural convection in cavities using adaptive mesh
refinement, B. A. Duarte, A. Silveira N. (Universidade Federal de Uberlândia)
9:30 0465 ENTS58 Influence of a bubble’s presence in thermal transfer of 3d numerical simulations in
cavities, B. A. Duarte, A. Silveira N. (Universidade Federal de Uberlândia)
9:50 0516 ENTS59
Heat conduction analysis in layered media with adhesive defect via single domain
formulation, integral transforms and finite difference, D. Knupp, F. Mascouto, L.
Abreu, E. de L. Sanches (Universidade Estadual do Rio de Janeiro), L. A. Sphaier
(Universidade Federal Fluminense)
10:10 Coffee-break
TIME CODE Numerical Heat Transfer
10:40 0561 ENTS60 Analysis of heat transfer by conduction in cooling chambers with polyurethane
plates, F. Costa, G. Donizeti (Universidade Estadual de Campinas)
11:00 0749 ENTS61
Mathematical modeling of heat transfer in rice vertical silo, V. Faoro, O.
Khatchatourian, M. O. Binelo, R. Neutzling (Universidade Regional do Noroeste do
Estado do Rio Grande do Sul)
11:20 0867 ENTS62
Numerical simulation of the heat transfer in canine knee joint during the situation of
the therapeutic cooling – an analysis considering variable blood perfusion, C.
Rodrigues, F. S. da Silva, R. Huebner, J. V. Toledo (Universidade Federal de Minas
Gerais), A. Araújo (Pontifícia Universidade Católica de Minas Gerais), C. de M.
Martins (Universidade Federal de Minas Gerais)
11:40 1008 ENTS63
Dynamic analysis of a three-phase reactor of fixed bed for petroleum and
petrochemical industry, E. Anjos, J. Silva, J. D. da C. G. de Carvalho (Universidade de
Pernambuco)
12:00 Lunch
TIME CODE Numerical Heat Transfer
13:30 1136 ENTS64 Numerical analysis of the heat transfer through a heat treatment furnace, P. G. C.
Martins, K. Souza, F. Barbosa, O. Shynkarenko (Universidade de Brasília)
13:50 1177 ENTS65 Shell and tube heat exchanger optimization using metaheuristics, H. da S.C.
Goetten, C. Nascimento, V. Mariani (Pontifícia Universidade Católica do Paraná)
14:10 1246 ENTS66
Mathematical model for heat transfer in steel billets subjected to slow cooling, K. N.
Cançado (Centro Federal de Educação Tecnológica de Minas Gerais), L. N. Soares
(Universidade Federal de Minas Gerais)
14:30 1288 ENTS67 A numerical study of different configurations of pipes filled with porous media, R.
Moro Filho (Universidade Federal do Rio Grande do Norte)
14:50 1348 ENTS68
Estimation of internal heat transfer coefficients in tree-dimensional ducts through the
reciprocity functional approach: preliminary results, M. Colaco, I. Tougri
(Universidade Federal do Rio de Janeiro)
15:10 1355 ENTS69
Numerical heat transfer modelling of a furnace under oxy-combustion for production
of ceramic frits, E. Morsch Filho, T. Possamai, V. de P. Nicolau, R. Oba (Universidade
Federal de Santa Catarina)
15:30 1401 ENTS70
Three-dimensional numerical study of staggered finned circular and elliptic tubes in
forced convection, M. V. A. Pereira, J. V. C. Vargas (Universidade Federal do Paraná),
J. A. Souza (Universidade Federal do Rio Grande - FURG), R. Matos (Universidade
Federal do Paraná)
35
ORAL SESSION TUE / 5
ENTS2 - Energy and Thermal Sciences (Room 7 - Bldg. 4 / Laranja)
TIME CODE Numerical Heat Transfer
8:30 1439 ENTS71
An inverse heat conduction study using time travelling regularization, E. dos S.
Magalhães, N. A. M. Leite, R. G. D. da Silva, S. M. M. de L. e Silva (Universidade
Federal de Itajubá)
8:50 1446 ENTS72 Study of solar chimney with OpenFOAM, L. Romeo, P. Galione, P. Curto-Risso
(Universidad de la República)
9:10 1476 ENTS73
Numerical simulation of the temperature distribution of the human knee joint in
neutral thermal conditions, C. de M. Martins, F. S. da Silva, R. Huebner
(Universidade Federal de Minas Gerais), A. Araújo (Pontifícia Universidade Católica
de Minas Gerais)
9:30 1542 ENTS74
Comparison of eigenproblem solution approaches for Dirichlet conditions in irregular
domains via integral transforms, I. F. Pinheiro, L. A. Sphaier (Universidade Federal
Fluminense), D. Knupp (Universidade Estadual do Rio de Janeiro)
9:50 1691 ENTS75
Numerical model for the evaluation of thermal effects in the evolution of methane
loading and discharge by the adsorption method, R. Díaz (Centro Federal de
Educação Tecnológica Celso Suckow da Fonseca), L. A. Sphaier (Universidade
Federal Fluminense)
10:10 Coffee-break
TIME CODE Numerical Heat Transfer
10:40 1906 ENTS76
Integral transformation of multidimensional heat conduction problems in
heterogeneous media, A. P. de Almeida, C. P. N. Cotta, R. M. Cotta (Universidade
Federal do Rio de Janeiro)
11:00 2153 ENTS77 Turbulence-radiation interactions in a spatially developing heated jet, J. Armengol,
R. G. dos Santos (Universidade Estadual de Campinas)
11:20 2191 ENTS78 Numerical study of a single bubble dynamic in nucleate pool boiling, M. Andrade, E.
M. Cardoso, J. B. C. Silva (Universidade Estadual Paulista Julio de Mesquita Filho)
11:40 2275 ENTS79 Theoretical analysis of printed circuit heat exchangers based in minichannels, K.
Chen, C. P. N. Cotta (Universidade Federal do Rio de Janeiro)
12:00 Lunch
TIME CODE Numerical Heat Transfer
13:30 2329 ENTS80
Comparison of the Monte Carlo and discrete ordinate methods for numerical
simulation of nanoparticles assisted laser photothermal therapy, A. N. de Sousa, A.
Bruno, A. Maurente (Universidade Federal do Rio Grande do Norte)
13:50 2429 ENTS81
Numerical simulations of natural convection and surface radiation in an open cavity
with disconnected solid blocks, V. G. Nardi, A. L. de Souza, A. Franco (Universidade
Tecnológica Federal do Paraná)
14:10 2519 ENTS82
Numerical analysis on laminar natural convection in a square cavity with different
nanofluids, M. Silva, A. Novelli (Instituto Federal de Educação, Ciência e Tecnologia
de São Paulo)
14:30 2841 ENTS83 The effect of the radiative properties in porous media combustion, R. Moro Filho
(Universidade Federal do Rio Grande do Norte)
14:50 5518 ENTS84
An explicit formulation for the thermal contact conductance estimation using
truncated eigenfunction expansions regularization, A. Silva Neto, M. Guimarães, L.
Abreu, D. Knupp (Universidade Estadual do Rio de Janeiro)
36
ORAL SESSION WED / 6
ENTS2 - Energy and Thermal Sciences (Room 7 - Bldg. 4 / Laranja)
TIME CODE Biofuels and Alternative Energy
8:30 0185 ENTS85 Exergy analysis of biogas production in ethanol distilleries, R. N. Nakashima, S. de O.
Junior (Universidade de São Paulo)
8:50 0230 ENTS86 Thermal and energetic analysis of eucalyptus urosemente, L. H. da S. Ignacio, P.
Santos, S. Carvalho (Universidade Federal de Uberlândia)
9:10 0238 ENTS87
Optimization of a standalone PV-wind-diesel-battery hybrid system feasible for a
university restaurant in Recife, Brazil, W. F. A. Borges (Instituto Federal de
Pernambuco), A. M. Araújo, A. A. C. Silva (Universidade Federal de Pernambuco), C.
R. Ferreira (Universidade Estadual do Sudoeste da Bahia), C. C. de A. Bezerra, C. L.
dos Santos, E. C. R. Fernandes, G. M. de Melo, G. J. A. M. Rocha, L. I. de Andrade
(Universidade Federal de Pernambuco)
9:30 0279 ENTS88
Techno-economic analysis of torrefaction, drying and briquetting of eucalyptus for
energy generation, B. S. Silva, E. Torres, J. A. M. da Silva (Universidade Federal da
Bahia)
9:50 0464 ENTS89 Development of a hybrid energy generation system through electromagnetic
induction, B. Diniz, L. Gusmão (Universidade Federal da Bahia)
10:10 Coffee-break
TIME CODE Biofuels and Alternative Energy
10:40 0617 ENTS90
Dimensioning of a mobile anaerobic biorreator - for field biomass analysis, J. D. I.
Silveira (Centro Universitário UNIVATES), C. H. Lagemann (Universidade do Vale do
Taquari), G. Lago(ABCM), O. Konrad (Centro Universitário UNIVATES), R. Garcia, R.
C. Izquierdo(Universidade Federal do Rio Grande do Sul)
11:00 0672 ENTS91
Experimental determination of laminar burning velocity of biogas at pressures up to
5 bar, L. Pizzuti , C. A. Martins , L. R. dos Santos (Instituto Tecnológico de
Aeronáutica)
11:20 0787 ENTS92
Biodiesel production from microwave irradiated reactor using homogeneous and
heterogeneous catalyst, S. Rabelo, L. Oliveira, A. França (Universidade Federal de
Minas Gerais)
11:40 0861 ENTS93 Thermal modeling of cavity-receiver for concentrated solar energy, L. F. do Canto, J.
R. S. Moreira (Universidade de São Paulo)
12:00 Lunch
TIME CODE Biofuels and Alternative Energy
13:30 0999 ENTS94
Experimental analysis of the behavior of an absorption refrigeration system using a
residential solar heating system, M. N. E. REIS, C. A. C. e Costa, A. C. de M. Cunha,
M. M. Ribeiro, N. S. da S. Kischka (Pontifícia Universidade Católica de Minas Gerais)
13:50 1096 ENTS95
Geometric optimization of solar cells by constructal law, R. A. Gouvea (Universidade
Federal do Rio Grande - FURG), M. L. Moreira (Universidade Federal de Pelotas), J.
A. Souza (Universidade Federal do Rio Grande)
14:10 1147 ENTS96 Photovoltaic panel monitoring system, D. Soares, M. A. F. COSTA (Universidade
Estadual do Rio de Janeiro)
14:30 1152 ENTS97
Conception and evaluation of a tracking system for a linear fresnel concentrator, V.
C. Pigozzo Filho, P. Brogni, J. P. G. Trancoso, G. M. Cascaes, V. C. Pigozzo Filho, A.
B. de S., J. Passos (Universidade Federal de Santa Catarina)
14:50 1265 ENTS98
A new mathematical model for compression of biomass powders, E. M. T. Marques
(Polytechnic of Viseu), T. Ferreira (CEFT), J. L. M. de S. Paiva, C. Pinho (Faculdade de
Engenharia da Universidade do Porto)
15:10 1304 ENTS99
Experimental evaluation of heat loss from a multi-tube trapezoidal cavity receiver for
a linear fresnel solar concentrator considering natural and forced convection
conditions, S. Sousa, A. B. de Sa, V. C. Pigozzo Filho, J. Passos (Universidade Federal
de Santa Catarina)
37
ORAL SESSION THU / 7
ENTS2 - Energy and Thermal Sciences (Room 7 - Bldg. 4 / Laranja)
TIME CODE Biofuels and Alternative Energy
8:30 1852 ENTS100 Modeling and analysis of an electric vehicle using PAMVEC, S. C. A. Almeida, F.
Vieira (Universidade Federal do Rio de Janeiro)
8:50 1891 ENTS101
Evaluation of the technical feasibility of the use of biogas of landfill for generation of
electrical energy according to different energy conversion technologies, A. L. Costa
(Universidade Federal de Minas Gerais), W. Ferreira (Universidade Federal de Minas
Gerais), B. Flausino (Universidade Federal de Ouro Preto)
9:10 1944 ENTS102 Design of wind turbine of low power for coast zones in Colombia, L. Carlos
(Corporación Universidad Piloto), R. D. H. Beleño (Universidad Piloto de Colombia)
9:30 1965 ENTS103
Combustion analysis of d-limonene as an additive to diesel-biodiesel blends in
compression ignition engines, W. K. D. C. Saruhashi, D. Módolo (Universidade
Estadual Paulista), L. E. R. Pereira (Universidade Estadual Paulista), L. Micheli
(Universidade Estadual Paulista)
9:50 2121 ENTS104 Wake characterization in row array of hydrokinetics turbines, V. de S. Britto, R. C. F.
Mendes, A. Brasil Jr, T. Oliveira (Universidade de Brasília)
10:10 Coffee-break
TIME CODE Biofuels and Alternative Energy
10:40 2136 ENTS105
Microstructural, morphological and electrochemical analysis of semiconductor spin-
coated thin films electrodes for dye-sensitized solar cells with natural dyes as
sensitizers, D. Sampaio, B. Ferreira, S. B. Rajendran, S. Yesudass, A. Barros (Centro
Federal de Educação Tecnológica Celso Suckow da Fonseca)
11:00 2232 ENTS106
Synthesis and characterization of flexible carbon fibers coated with
polyaniline/manganese hexacyanoferrate nanoparticles for supercapacitors, M.
Maier, S. B. Rajendran, D. Sampaio, A. Barros (Centro Federal de Educação
Tecnológica Celso Suckow da Fonseca)
11:20 2365 ENTS107
Potential of bioelectricity generation from biogas of landfills located in São Paulo
city, Brazil, M. C. Guimarães, R. F. S. Paulino, J. L. Silveira (Universidade Estadual
Paulista Julio de Mesquita Filho)
11:40 2434 ENTS108
Service mileage assessment of lubricant charge used in engines fueled with biodiesel
B100, J. Velásquez, F. Pereira, J. Riechi (Universidade Tecnológica Federal do
Paraná)
12:00 Lunch
TIME CODE Biofuels and Alternative Energy
13:30 2447 ENTS109 Overview an ethanol steam reforming for hydrogen production, C. H. G. de Brito, L.
Soares, C. Maia, J. R. Sodré (Pontifícia Universidade Católica de Minas Gerais)
13:50 2611 ENTS110 Annual energy production from a horizontal axis small wind turbine using NACA
4412 airfoil, W. Okita, L. F. M. Moura, K. Ismail (Universidade Estadual de Campinas)
14:10 2618 ENTS111 Development of a fuel cell, H. J. dos Anjos (Centro Universitário UNA), D. V. dos S.
Santos (Universidade Federal de Minas Gerais)
14:30 2751 ENTS112
Study of the oxidation of automotive lubricants contaminated with biodiesel and
blends, M. T. dos S. Silva, S. Alves, R. Silva, R. Silva (Universidade Federal do Rio
Grande do Norte)
14:50 2896 ENTS113
Project and development of a system for detection of volumetric fraction of ethanol
contained water, D. Luceiro (Universidade Federal de Santa Maria), M. Santos
(Tecvix Desenvolvimento e Inovação Ltda)
15:10 2906 ENTS114
Development of a hybrid alternative generator for complementation of small
consumer power units, M. N. E. Reis, F. Batista, P. Souza (Pontifícia Universidade
Católica de Minas Gerais)
15:30 -- -- --
38
ORAL SESSION WED / 6
ENTS3 - Energy and Thermal Sciences (Room 4 - Bldg. 4 / Laranja)
TIME CODE Thermodynamics and Thermal Systems
8:30 0019 ENTS115 An object-oriented platform for high-fidelity modeling of power plants, C. Celis
(Pontifícia Universidad Católica del Perú), S. Barros (GT2 Energia)
8:50 0219 ENTS116
A fuel-and-product model of concentrating solar power systems for application in
exergy analysis, T. de O. Macedo (Centro Federal de Educação Tecnológica Celso
Suckow da Fonseca), M. E. Cruz (Universidade Federal do Rio de Janeiro), L. dos S.
R. VIEIRA (Centro de Pesquisas de Energia Elétrica)
9:10 0232 ENTS117 Pressure ratio influence over the performance of a scroll expander, P. E. B. de Mello,
F. V. de Oliveira , F. M. F. Silva (Centro Universitário da FEI)
9:30 0379 ENTS118
A first comparison of different exergy analysis applied to the human body to assess
thermal comfort conditions, T. J. da S. Ribeiro, C. E. K. Mady (Universidade Estadual
de Campinas)
9:50 0517 ENTS119 Thermal exploitation of the vinasse through an organic Rankine cycle, A. L. de Brito,
M. R. F. Santos, M. Modesto (Universidade Federal do ABC)
10:10 Coffee-break
TIME CODE Thermodynamics and Thermal Systems
10:40 0695 ENTS120
Thermoeconomic optimization of Kalina cycle systems for waste heat recovery in a
Diesel engine, M. Schiaffino, L. Araújo, A. Morawski, M. A. Barone, C. C. M. Cunha, J.
L. M. Donatelli, J. J. C. S. Santos (Universidade Federal do Espírito Santo)
11:00 0697 ENTS121 Evaluation of CHP system with diesel engine based on SPECO approach, E. J. C.
Cavalcanti, M. Lima, G. F. de Souza (Universidade Federal do Rio Grande do Norte)
11:20 0712 ENTS122 Exergy analysis of a cogeneration power plant, E. J. C. Cavalcanti, G. F. de Souza, M.
Lima (Universidade Federal do Rio Grande do Norte)
11:40 0917 ENTS123
On the use of heat exchange’s devices in order to improve adsorption and desorption
processes of ANG tanks, B. Chieregatti, J. de S. B. Lima, E. Volpe (Universidade de
São Paulo), M. Hayashi (Universidade Federal do ABC)
12:00 Lunch
TIME CODE Thermodynamics and Thermal Systems
13:30 0933 ENTS124 Development of a simulation software for thermal systems, P. C. Gesualdo Jr, M. N.
E. Reis (Pontifícia Universidade Católica de Minas Gerais)
13:50 0958 ENTS125
Influence of geometric parameters in thermal behavior of the receiver of a Linear
Fresnel Reflector system, P. Scalco, J. Copetti, M. H. Macagnan (Universidade do
Vale do Rio dos Sinos)
14:10 0959 ENTS126
Cost evaluation of a turbogeneration system driven by high efficiency aeroderivative
gas turbines equipped with air inlet cooling system (TIC) in Rio de Janeiro city, D.
Chalhub (Universidade Estadual do Rio de Janeiro)
14:30 0969 ENTS127
Numerical / experimental methodology for determination simultaneous and
monitoring of thermal properties and internal temperature of equipment in situ, S.
Carvalho, B. H. O. Mulina, V. L. Borges (Universidade Federal de Uberlândia)
14:50 1012 ENTS128
Analysis of thermodynamic cycles for cogeneration in cement industry, F. R. P.
Arrieta, T. Assis, B. Tavares (Pontifícia Universidade Católica de Minas Gerais), C.
Silva (Cemig Geração e Transmissão SA)
15:10 1028 ENTS129
Damage initiation in a brittle-elastic water-filled pore induced by a very small fluid
temperature variation, M. L. Martins-Costa, H. da C. Mattos , L. Teixeira
(Universidade Federal Fluminense)
15:30 1116 ENTS130 Hybridization of concentrated solar power and confined landfill gas for power
generation – a Case Study, A. Filho, M. Siqueira (Universidade de Brasília)
39
ORAL SESSION THU / 7
ENTS3 - Energy and Thermal Sciences (Room 4 - Bldg. 4 / Laranja)
TIME CODE Thermodynamics and Thermal Systems
8:30 1118 ENTS131
Optimal configuration of a floating combined cycle power plant for offshore
applications, J. V. Guillen , M. M. L. dos Reis, W. Gallo (Universidade Estadual de
Campinas)
8:50 1121 ENTS132
Energetic and exergetic analysis of supercritical CO2, organic Rankine and Kalina
cycle for waste heat recovery in a FPSO unit, M. M. L. dos Reis, J. V. Guillen, W. Gallo
(Universidade Estadual de Campinas)
9:10 1179 ENTS133 Exergy analysis of a coupled unit to produce electrical energy and cold water, R.
Souza, J. Medeiros, C. A. Santos (Universidade Federal da Paraíba)
9:30 1204 ENTS134
Numerical solution of a thermal and fluid-dynamic problem involving phase change
with moving source applied to TIG welding process, S. Carvalho, P. Bento, M.
Miranda , M. G. A. dos Reis, V. L. Borges (Universidade Federal de Uberlândia)
9:50 1218 ENTS135
CFD flow analysis of a tesla turbine under motionless regime, P. S. Schneider, J. F. T.
de Carvalho (Universidade Federal do Rio Grande do Sul), L. Rosa (Universidade
Regional de Blumenau)
10:10 Coffee-break
TIME CODE Thermodynamics and Thermal Systems
10:40 1232 ENTS136 Inhibition of carbon dioxide hydrates by ethanol and sodium chloride, M. M. Neto, A.
Guembaroski, R. Morales , A. Sum (Universidade Tecnológica Federal do Paraná)
11:00 1233 ENTS137
Joule-Thomson coefficient prediction by using Cubic Plus Association (CPA) equation
of state, M. M. Neto, E. T. Tiuman, M. V. R. Pereira, D. Bertoldi, R. Morales
(Universidade Tecnológica Federal do Paraná)
11:20 1234 ENTS138
Multiphase flash in presence of hydrates and mixture of inhibitors, M. M. Neto, T.
Sirino, D. Bertoldi, R. Morales, A. Sum (Universidade Tecnológica Federal do
Paraná)
11:40 1331 ENTS139
Experimental analysis of a bench scale Tesla turbine, P. S. Schneider (Universidade
Federal do Rio Grande do Sul), C. Ermel (Universidade Regional Integrada do Alto
Uruguai e das Missões ), A. L. R. Thomazoni , J. C. da S. F. Vieira , G. Pettenuzzo
(Universidade Federal do Rio Grande do Sul)
12:00 Lunch
TIME CODE Thermodynamics and Thermal Systems
13:30 1353 ENTS140
Analysis of the effects of periodic maintenance of agricultural tractors through the
method of experimental planning, P. S. Schneider, L. E. A. Ferrari, R. Donni
(Universidade Federal do Rio Grande do Sul)
13:50 1447 ENTS141
Analysis of energy production using a municipal solid waste pyrolysis system and an
internal combustion engine, E. M. Leal, L. A. Bortolaia, F. D. de S. Pereira
(Universidade Federal de Ouro Preto)
14:10 1569 ENTS142
Thermodynamic modeling of a power cycle running indirect co-firing of coal and
solid recovered fuel (SRF), F. Pereira(Universidade Federal da Integração Latino-
Americana), P. S. Schneider (Universidade Federal do Rio Grande do Sul)
14:30 1610 ENTS143
Analysis of a solar chimney with double inlet by means of Venturi effect, C. A. Neto,
T. de F. V. Bôas (Centro Universitário da FEI), F. P. Malta (Universidade de São
Paulo)
14:50 1726 ENTS144 Steady heat transfer solution in a finned-tube radiator configuration, I. F. Pinheiro, L.
A. Sphaier, L. S. de B. Alves (Universidade Federal Fluminense)
15:10 1849 ENTS145 Comparison of a hybrid CSP-biomass power plant performance into two different
climate conditions, P. H. D. de V. Sousa, M. Siqueira (Universidade de Brasília)
15:30 1938 ENTS146
On the physical exergy disaggregation levels for the isolation of dissipative
components in the thermoeconomic productive diagrams, J. J. C. S. Santos, D.
Colombo, A. Lourenço, M. A. Barone (Universidade Federal do Espírito Santo), S. A.
N. de Perez (Universidade Federal do ABC), J. L. M. Donatelli (Universidade Federal
do Espírito Santo)
40
ORAL SESSION FRI / 8
ENTS3 - Energy and Thermal Sciences (Room 4 - Bldg. 4 / Laranja)
TIME CODE Thermodynamics and Thermal Systems
8:30 1968 ENTS147
Simplified thermal analysis and optimization of a beta type Stirling cycle, G. H.
Correa, M. F. de S. Moreira, L. Faria , C. Figueiredo, F. Fonseca, C. Teixeira, D. H. do
N. Viola (Centro Universitário Newton Paiva)
8:50 1980 ENTS148 Thermosyphon applied as thermal reservoir to chemisorption chillers, M. V. Oro, R.
G. Oliveira, E. Bazzo (Universidade Federal de Santa Catarina)
9:10 2460 ENTS149 Desiccant-assisted system for compression, F. Quintanilha, L. A. Sphaier
(Universidade Federal Fluminense)
9:30 2566 ENTS150
Thermal performance of a heat pump with solar evaporator under zero solar
radiation conditions, H. Augusto (Universidade Federal de Minas Gerais), F. N. Q.
dos Santos (Centro Federal de Educação Tecnológica de Minas Gerais), J. J. G.
Pabon, R. Koury, L. Machado (Universidade Federal de Minas Gerais)
9:50 2582 ENTS151
Design of a counter-current coaxial condenser for a refrigerating machine operating
with CO2 in a subcritical cycle, H. Augusto, C. H. N. da Silva, S. M. S. Pinheiro
(Universidade Federal de Minas Gerais), G. Gama, E. V. Silva (Pontifícia Universidade
Católica de Minas Gerais)
10:10 Coffee-break
TIME CODE Thermodynamics and Thermal Systems
10:40 2669 ENTS152
Energy and exergy analysis of an aromatics plant. Implementation of two thermal
energy recovery units, C. Pinho, A. N. Vilarinho, J. M. de Campos (Universidade do
Porto, Portugal)
11:00 5912 ENTS153 Numerical simulation of air-solid thermal storage for CSP systems, C. Adasme, T.
Oliveira, A. B. Junior, M. Siqueira (Universidade de Brasília)
11:20 2871 NUCE2
Parametric analysis of the primary circuit of the Angra 1 nuclear power plant PWR
type and its applications in the naval nuclear propulsion, L. Chaves, M. Curi, L.
Ferreira (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca)
11:40 -- -- --
12:00 Lunch
41
ORAL SESSION WED / 6
FIVB - Flow Induced Vibration (Room 2 - Bldg. 4 / Laranja)
TIME CODE Flow Induced Vibration
8:30 0045 FIVB1 Aeroelastic modeling of low speed pitching oscillations induced by stall considering
nonlinear springs, C. R. dos Santos, F. D. Marques (Universidade de São Paulo)
8:50 0097 FIVB2
Numerical investigation of the Den Hartog’s criterion of stability, for a static circular
cylinder fitted to a fixed splitter plate, for a Reynolds number equal to 60 and 200, R.
Basso, G. R. da S. Assi, R. Orselli, F. Saltara (Universidade de São Paulo)
9:10 1003 FIVB3
CFD study on the influence of free surface and turbulence modeling on the flow
around a fixed circular cylinder with low aspect ratio, P. Lopes (Universidade de São
Paulo), G. Rosetti (Argonáutica Engenharia e Pesquisas), C. P. Pesce (Universidade
de São Paulo), R. Gonçalves (University of Tokyo)
9:30 0132 FIVB4 Design of a modular suspension rig for aeroelastic studies in a wind tunnel, G. B.
Martins, G. R. da S. Assi (Universidade de São Paulo)
9:50 1112 FIVB5 Cantilevered pipe ejecting fluid under VIV: non-linear reduced order modeling and
analysis, R. M. M. Orsino, C. P. Pesce, G. Franzini (Universidade de São Paulo)
10:10 Coffee-break
TIME CODE Flow Induced Vibration
10:40 0388 FIVB6
Fluid structure interaction applied to the Couette-Circular problem, A. A.
Nascimento, F. P. Mariano (Universidade Federal de Goiás), E. L. M. Padilla, A.
Silveira Neto (Universidade Federal de Uberlândia)
11:00 0441 FIVB7
Experimental flow-induced motions of array of floating cylinders with circular, square
and diamond sections, R. Gonçalves (University of Tokyo), M. E. Chame, P. Lopes
(Universidade de São Paulo), N. H. Hannes (Universidade Federal de Santa
Catarina), S. Hirabayashi, H. Suzuki (University of Tokyo)
11:20 0544 FIVB8
Analysis of the switching flow after two cylinders side-by-side submitted to a high
turbulence impinging flow, A. Ost, S. V. Möller (Universidade Federal do Rio Grande
do Sul)
11:40 0946 FIVB9
Investigation of the high energy mode branch in flexible cylinders VIV: a novel
recursive experimental analysis methodology, W. A. Defensor Filho, C. P. Pesce, G.
Franzini (Universidade de São Paulo)
12:00 Lunch
TIME CODE Flow Induced Vibration
13:30 0952 FIVB10 Piezoelectricity induced by turbulent airflow for clean and renewable electric power
generation, R. Pires, M. M. Vieira, A. Soares (Universidade Federal de Mato Grosso)
13:50 0956 FIVB11
Experimental analysis of turbulent transversal flow on two fixed parallel cylinders
with oscillatory and rotational freedom, D. Varela, R. F. Neumeister, G. Dias, A. V. de
Paula, S. V. Möller (Universidade Federal do Rio Grande do Sul)
14:10 0105 FIVB12
Velocity levels analysis in a cross flow over two side-by-side cylinders and a row of
cylinders, R. F. Neumeister, S. V. Möller, A. P. Petry (Universidade Federal do Rio
Grande do Sul)
14:30 1063 FIVB13 Spectrum sensitivity of the flow around spring-mounted cylinder, D. I. Dolci, B.
Carmo (Universidade de São Paulo)
14:50 0361 FIVB14
Measurement of the forces on two cylinders side-by-side in bistable flow, G. Dias
(Universidade Federal do Rio Grande do Sul), A. La Rosa (Universidade Católica de
Pelotas), D. Varela, A. Balbinot, S. V. Möller (Universidade Federal do Rio Grande do
Sul)
15:10 1199 FIVB15
Free surface modelling using 2 way fluid structure interaction approach for drag in a
cylinder calculation, F. M. de Almeida, G. R. da Silva Assi (Universidade de São
Paulo)
15:30 -- -- --
42
ORAL SESSION THU / 7
FIVB - Flow Induced Vibration (Room 2 - Bldg. 4 / Laranja)
TIME CODE Flow Induced Vibration
8:30 1440 FIVB16
Vortex-induced stay vane cracks in a Francis turbine: an application of experimental
and numerical analysis, R. Sampaio (Voith Hydro Ltda.), A. D. Agostini Neto
(Universidade de São Paulo), V. Borri, R. Castilho (China Three Gorges Brasil)
8:50 2138 FIVB17 Hydroelastic effects in structural response under wave impact, R. A. Amaro Jr., L.-Y.
Cheng (Universidade de São Paulo)
9:10 5909 FIVB18
Uncertainties in applying the independence principle to the VIV responses of yawed
cylinders, N. H. Hannes, A. Mikowski, A. Fujarra (Universidade Federal de Santa
Catarina)
9:30 -- -- --
9:50 -- -- --
10:10 Coffee-break
43
ORAL SESSION MON / 4
FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Computational Fluid Dynamics
8:30 1137 FLMR1
Flow visualization and numerical investigation of gap vortex instability in a
rectangular channel containing a single rod bundle, H. Severino, J. Goulart
(Universidade de Brasília), A. V. de Paula (Universidade Federal do Rio Grande do
Sul)
8:50 2178 FLMR2 Direct numerical simulations of pipe flow with wall transpiration, M. Rempto, H.
Anbarlooei, A. P. S. Freire (Universidade Federal do Rio de Janeiro)
9:10 2691 FLMR3
Effects of impeller design on the characteristics of centrifugal pump, R. A. M. Carrillo,
C. J. F. Júnior, D. Pereira, T. J. P. da Silva, C. E. C. Rodriguez (Universidade Federal
de Itajubá)
9:30 0292 FLMR4
Numerical simulations of flow and mixing formation in direct injected spark ignition
engines, M. D. Ribeiro, A. Bimbato, M. Zanardi, J. A. P. Balestieri (Universidade
Estadual Paulista Julio de Mesquita Filho)
9:50 0349 FLMR5
First scalability study of a LES solver for supersonic jet flow configurations, C. A.
Junqueira Jr., S. Yamouni (Instituto Tecnológico de Aeronáutica), J. L. F. Azevedo
(Instituto de Aeronáutica e Espaço), W. Wolf (Universidade Estadual de Campinas)
10:10 Coffee-break
TIME CODE Computational Fluid Dynamics
10:40 0466 FLMR6 Free surface modelling using 2 way fluid structure interaction approach for drag in a
cylinder calculation, F. M. de Almeida, G. R. da Silva A. (Universidade de São Paulo)
11:00 0478 FLMR7
Numerical simulation of the neutral atmospheric surface layer flow over real terrain:
the Askervein hill case, W. C. Radunz, A. P. Petry (Universidade Federal do Rio
Grande do Sul)
11:20 0480 FLMR8 Numerical simulation of wind flow over a highly complex topography: the Bolund hill
case, W. C. Radunz, A. P. Petry (Universidade Federal do Rio Grande do Sul)
11:40 0488 FLMR9 Computational analysis of the flow around a canard type aircraft, O. de Almeida, A.
O. D. dos Santos (Universidade Federal de Uberlândia)
12:00 Lunch
TIME CODE Computational Fluid Dynamics
13:30 0512 FLMR10
Numerical investigation of hemodynamics patterns after transcatheter aortic valve
replacement (TAVR), D. Celis, A.Nieckele, I. F. I. Aguilar, P. N. Azevedo, B. Azevedo
(Pontifícia Universidade Católica do Rio de Janeiro)
13:50 0527 FLMR11
Evaluation of the statistical convergence of turbulent flow data, J. R. Andrade
(Universidade Federal de Uberlândia), R. Martins (Universidade Federal do Espírito
Santo), R. Thompson (Universidade Federal Fluminense), A. S. Neto (Universidade
Federal de Uberlândia), G. Mompean (University of Lille)
14:10 0579 FLMR12
Simulation of a 2-D pulsatile flow in a bifurcated geometry using open source
software, G.P. V. de Almeida (Instituto Tecnológico de Aeronáutica), J. L. F. Azevedo
(Instituto de Aeronáutica e Espaço)
14:30 0644 FLMR13 CFD analysis of a low speed subsonic wind tunnel, O. de Almeida, O. Neto
(Universidade Federal de Uberlândia)
14:50 0726 FLMR14
Soybean storage bin aeration system optimization, V. Faoro, O. Khatchatourian, M.
O. Binelo, N. Toniazzo (Universidade Regional do Noroeste do Estado do Rio
Grande do Sul)
15:10 0755 FLMR15 Instability analysis for mixing layers using time stepping method, R. B. Freitas, L. S.
de B. Alves (Universidade Federal Fluminense)
15:30 0801 FLMR16
Adaptation of a nonlinear lifting line based method into a vortex lattice code for stall
and post stall calculation, A. Araújo, R. L. U. F. Pinto (Universidade Federal de Minas
Gerais), D. C. R. Azevedo (Universidade Federal do Piauí)
44
ORAL SESSION TUE / 5
FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Computational Fluid Dynamics
8:30 0818 FLMR17 Lattice Boltzmann simulation of a droplet interaction with a solid surface, G. dos S.
Ribeiro, M. Guzella, L. C. Gómez (Universidade de São Paulo)
8:50 0851 FLMR18
Using foam-extend to assess the influence of fluid-solid interaction on the flow in
intracranial aneurysms, I. L. de Oliveira, J. L. Gasche (Universidade Estadual
Paulista), J. Militzer (Dalhousie University), C. Baccin (Hospital Israelita Albert
Einstein)
9:10 0916 FLMR19 Numerical investigation of viscoelastic liquid curtain breakup, M. Bazzi, M. Carvalho
(Pontifícia Universidade Católica do Rio de Janeiro)
9:30 0938 FLMR20
Grid convergence analysis using finite volume method for nonlinear case of fluid flow
between two parallel flat plates, W. Schinestzki, L. B. da Luz , J. C. Zart, G. Demarco
(Universidade Federal de Santa Maria)
9:50 1002 FLMR21
Assessment of the wake patterns and unsteady loads for a NACA0012 airfoil under
heaving and pitching motion, L. Frederico, W. Wolf (Universidade Estadual de
Campinas)
10:10 Coffee-break
TIME CODE Computational Fluid Dynamics
10:40 1066 FLMR22 Trailing edge formation during slot coating of rectangular patches, D. Maza, M.
Carvalho (Pontifícia Universidade Católica do Rio de Janeiro)
11:00 0165 FLMR23 Aeroacoustic prediction of the lagoon landing gear, T. R. Ricciardi, W. Wolf
(Universidade Estadual de Campinas)
11:20 1178 FLMR24
Experimental evaluation of the influence of surface roughness on a model obtained
by different casting processes in the development of flow profiles, F. de A. da S. Jr, F.
Brand, L. Trevisan, D. L. Villanova, B. Nonemacher (Instituto Federal de Educação,
Ciência e Tecnologia do Rio Grande do Sul)
11:40 1215 FLMR25
Elements method’s validation in order to determinate soybeans’ final velocity, R.
Lima, M. O. Binelo, O. Khatchatourian, S. V. Winik, R. K. Lorenzoni (Universidade
Regional do Noroeste do Estado do Rio Grande do Sul)
12:00 Lunch
TIME CODE Computational Fluid Dynamics
13:30 1220 FLMR27 Numerical study of flow inside supersonic separators, Matheus Augusto C. Pires, B.
de A. Avancini, R. Orselli, B. Carmo (Universidade de São Paulo)
13:50 1241 FLMR28
Machine learning techniques for accuracy improvement of rans simulations, M. Cruz
(Universidade Federal do Rio de Janeiro), R. Thompson (Universidade Federal
Fluminense), R. D. A. Bacchi (Universidade Federal do Rio de Janeiro), L. Sampaio
(Universidade Federal Fluminense)
14:10 1291 FLMR29
Dynamics of blood flow in coronary artery, G. R. dos Anjos (Universidade Estadual
do Rio de Janeiro), S. McGinty (University of Glasgow), R. M. de Lucena, J. da R. M.
Pontes, N. Mangiavacchi (Universidade Estadual do Rio de Janeiro)
14:30 1313 FLMR30
Görtler instability study on the pressure surface of a turbine blade, L. Marques
(Universidade de São Paulo), J. K. Rogenski (Universidade Tecnológica Federal do
Paraná), L. F. de Souza (Universidade de São Paulo)
14:50 1379 FLMR31
OWC simulation comparison between turbulent and laminar models using
OpenFOAM code, A. Santos, D. V. E. Barbosa, J. A. Souza, E. dos Santos
(Universidade Federal do Rio Grande - FURG)
15:10 1399 FLMR32
Assessment of two-equation and les turbulence models in the transition to
turbulence of channel flows, J. M. Vedovoto, R. Rocha (Universidade Federal de
Uberlândia)
15:30 1441 FLMR27 Parametric analysis of a swing check valve using computational fluid dynamics
(CFD), N. E. de A. Pontes, M. Junior (Instituto Federal de Pernambuco)
45
ORAL SESSION WED / 6
FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Computational Fluid Dynamics
8:30 1474 FLMR33 Marangoni instability of a thin liquid film flow with viscous dissipation, E. Villela, L. S.
de B. Alves (Universidade Federal Fluminense)
8:50 1480 FLMR34
Solar updraft tower performance evaluation, A. Ghazarian (Instituto Ingeniería
Mecánica y Producción Industrial), P. Curto-Risso, P. Galione (Universidad de la
República)
9:10 1574 FLMR35
Response amplitude operators of a Wigley ship model via computational fluid
dynamics, R. M. Moreira, R. Santos, S. Daruis, G. Rojo (Universidade Federal
Fluminense), R. D. A. Bacchi (Universidade Federal do Rio de Janeiro)
9:30 1602 FLMR36
The backscatter on large eddy solutions and on solution obtained with non-linear
disturbance equation, R.G. da SIlva (Instituto de Aeronáutica e Espaço), M. Pimenta
(Universidade de São Paulo)
9:50 1608 FLMR37 Computational simulation of flow in a supersonic gas separator, B.de A. Avancini, M.
A. C. Pires, B. Carmo, R. Orselli (Universidade de São Paulo)
10:10 Coffee-break
TIME CODE Computational Fluid Dynamics
10:40 1698 FLMR38
Growth of even and odd instability modes in compressible binary jet flows, J. K.
Rogenski (Universidade Tecnológica Federal do Paraná), L. F. de Souza
(Universidade de São Paulo), M. T. de Mendonça (Instituto de Aeronáutica e
Espaço), P. Morris (Pennsylvania State University)
11:00 1707 FLMR39
Hydrodynamic analysis of debris containment grids in hydropower plant using
porous media, E. T. Katsuno (Universidade de São Paulo), F. S. de Castro, J. L. D.
Dantas (Instituto de Pesquisa Tecnológica do Estado de São Paulo)
11:20 1712 FLMR40
Aerodynamic performance analysis of three-bladed horizontal axis wind turbine
through computational modeling and simulation, O. Neto, B. Carmo (Universidade
de São Paulo)
11:40 1718 FLMR41
Numerical and experimental study of free surface flows in a rock-flow cell, A. V. L.
Machado (Universidade Tecnológica Federal do Paraná), F. Schneider (Centro
Universitário Autônomo do Brasil), P. H. D. Dos Santos, R. Morales (Universidade
Tecnológica Federal do Paraná), X. Zhang (Colorado School of Mines), A. Sum
(Universidade Tecnológica Federal do Paraná)
12:00 Lunch
TIME CODE Computational Fluid Dynamics
13:30 1722 FLMR42
Numerical simulation of mixed convection in porous media induced by viscous
dissipation, P. V. Brandão, R. D. dos Santos, L. S. de B. Alves (Universidade Federal
Fluminense)
13:50 1723 FLMR43 Wind farm layout optimization based on CFD simulations, L. E. B. Cruz, B. Carmo
(Universidade de São Paulo)
14:10 1844 FLMR44 Large-eddy simulation of the flow though a propeller hydrokinetic turbine, P. H. D.
de V. Sousa, M. Siqueira (Universidade de Brasília)
14:30 2120 FLMR45 Data transition from 3D to 1D simulation for underhood analysis of cooling system,
R. Silva, R. G. dos Santos (Universidade Estadual de Campinas)
14:50 2140 FLMR46 Study of laminar-turbulent transition on a flow under a flat plate using a CFD tool, F.
A. F. Câmara, A. Barros, S. Souza (Universidade Federal do Rio Grande do Norte)
15:10 0202 FLMR47
Large scale effects in the turbulent kinetic energy budget of channel flows, L. A. C. A.
Schiavo, W. Wolf (Universidade Estadual de Campinas), J. L. F. Azevedo (Instituto
de Aeronáutica e Espaço)
15:30 -- -- --
46
ORAL SESSION THU / 7
FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Computational Fluid Dynamics
8:30 2235 FLMR49
Numerical analysis of the influence of output angles of rotor blades on characteristics
curves of a radial pump, L. de L. Freire, L. M. C. Ferro (Universidade Federal Rural
do Semi-árido)
8:50 2273 FLMR50
Numerical prediction of pressure fluctuations at the runner output of a generator of
a hydroeletric power plant of Tucuruí-Pa, G. Junior, A. Lima, L. Bastos, A. Mesquita
(Universidade Federal do Pará)
9:10 2346 FLMR51
Transport through polymer layer and porous arterial wall with binding in drug-
eluting stents using the fem, R. M. de Lucena, N. Mangiavacchi, J. da R. M. Pontes,
G. R. dos Anjos, S. McGinty (University of Glasgow)
9:30 2393 FLMR52
Lattice-Boltzmann assessment of the tortuosity of a 2D Sierpinski carpet type of
porous medium, R. Bazarin, C. Naaktgeboren, S. Junqueira (Universidade
Tecnológica Federal do Paraná)
9:50 2531 FLMR53
Mathematical modeling and simulation of the rheological behavior of an elastic
liquid undergoing different shear flows, Á. M. Neto, I. D. O. Pereira, Y. D. Sobral, F. R.
Cunha (Universidade de Brasília)
10:10 Coffee-break
TIME CODE Computational Fluid Dynamics
10:40 2619 FLMR54 Compressible flow over a circular cylinder using a virtual boundary method, J. S.
Pineda, P. Greco (Universidade de São Paulo)
11:00 2637 FLMR55
Numerical investigation of the flow behavior in injection moulding process for
nematic LCPS, P. A. Cruz (Universidade Federal do Tocantins), M. Tomé
(Universidade de São Paulo)
11:20 2805 FLMR56
Evaluation of the influence of wind speed and angle of attack on the aerodynamic
effect of wind turbine blades, R. Silva, S. Alves, L. G. V. M. de Souza, E. A. de Faria,
M. T. dos S. Silva (Universidade Federal do Rio Grande do Norte)
11:40 2908 FLMR57 Dynamic analysis of the fluid flow over a wind turbine blade, R. Rocha, A. A. C.i
Júniorr, J. M. Vedovoto (Universidade Federal de Uberlândia)
12:00 2916 FLMR58
Numerical simulation of the flow of suspended soft-capsules through constricted
channels, J. Roca, I. Menezes, M. Carvalho (Pontifícia Universidade Católica do Rio
de Janeiro)
12:00 Lunch
TIME CODE Industrial Applications and Turbomachinery, Theoretical and Analytical Modeling
13:30 1713 FLMR59
Experimental analysis of the precharging effect on the dynamic behavior of a reed
valve used in refrigeration compressors, G. Moimás, A. L. S. Abrego, J. L. Gasche
(Universidade Estadual Paulista Julio de Mesquita Filho)
13:50 2629 FLMR60
Technical and economic viability of the hydropower plant implementation on the
urban water supply network: case study - WTP Pacas João Monlevade, R. O. Neto
(Universidade Federal de Itajubá), M. J. V. Caldeira (Universidade do Estado de
Minas Gerais), C. J. R. Coronado (Universidade Federal de Itajubá), G. Silva, G.
Magalhães, L. Silva, J. Mata (Universidade do Estado de Minas Gerais)
14:10 0253 FLMR61 Numerical computation of airfoil-gust compressible lift response, R. F. Miotto, W.
Wolf (Universidade Estadual de Campinas)
14:30 6487 FLMR62 Numerical investigation of viscous flow in ESP’s impeller and diffuser, M. R. M.
Penteado, M. S. de Castro, A. Bannwart (Universidade Estadual de Campinas)
14:50 0804 FLMR63
A similarity law for transpired turbulent flows, M. C. Guimaraes (Universidade
Federal do Rio de Janeiro), D. A. Cruz (Universidade Estadual do Rio de Janeiro), A.
P. S. Freire (Universidade Federal do Rio de Janeiro)
15:10 1594 FLMR64 Shear-induced hydrodynamic diffusion and aggregation on non-Brownian dilute
magnetic suspensions, G. R. Neto (Universidade de Brasília)
15:30 -- -- --
47
ORAL SESSION FRI / 8
FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Instrumentation and Experiments
8:30 0453 FLMR65
Development of ionization sensors for shockwave speed measurements, R. A. Cintra
(Universidade Federal de Itajubá), T. Rolim (Instituto de Estudos Avançados), L. Al.
G. Ribeiro (Instituto Tecnológico de Aeronáutica)
8:50 0578 FLMR66
Structural analysis for a reduced scale model of a hydropower plant debris
containment grid, F. S. de Castro (Instituto de Pesquisas Tecnológicas do Estados
de São Paulo), E. T. Katsuno (Universidade de São Paulo), J. M. P. de Souza, A. M.
Kogishi, J. L. D. Dantas (Instituto de Pesquisa Tecnológica do Estado de São Paulo)
9:10 0823 FLMR67
Hydrodynamic and acoustic characteristics of the Labhidro’s small cavitation tunnel,
W. Barnack, A. Moura, R. Sbragio, H. C. da Silva Jr. (Marinha do Brasil), L. Pansanato
(Universidade Estadual Paulista Julio de Mesquita Filho)
9:30 1004 FLMR68
Development of a prototype equipment for cavitation testing, W. A. Morais
(Universidade Santa Cecília), R. Pereira (Universidade Santa Cecília), B. Siqueira
(Universidade Santa Cecília), C. A. Moino (Universidade Santa Cecília), D. de Moraes
Jr. (Universidade Santa Cecília)
9:50 1644 FLMR69
Experimental study of gas-liquid flow separation at an inclined T-junction with a
vertical branch, Y. Gavioli, J. Loureiro, V. Aibe, A. P. S. Freire, L. P. S. de Oliveira
(Universidade Federal do Rio de Janeiro)
10:10 Coffee-break
TIME CODE Instrumentation and Experiments
10:40 1770 FLMR69 Perturbation of a turbulent channel flow by a two-dimensional triangular ripple, F.
Cúñez, E. de M. Franklin (Universidade Estadual de Campinas)
11:00 1967 FLMR70
Analysis of wind shear and turbulence intensity influence on wind power
performance using SCADA and LIDAR data, L. J. L. Stival (Universidade Federal do
Paraná), F. O. de Andrade (Universidade Tecnológica Federal do Paraná), A. K.
Guetter (Universidade Federal do Paraná)
11:20 2604 FLMR71
Experiments on turbulent boundary layer separation using particle image
velocimetry, L. J. C. Gonzalez, J. Loureiro, A. P. S. Freire (Universidade Federal do
Rio de Janeiro)
11:40 2150 FLMR72
Turbulent structures in a flow visualization inside a conical diffuser, J. L. C. R. Vila, L.
Dias, P. H. Mattos, P. Almeida (Centro Universitário UDF), T. Melo (Universidade de
Brasília)
12:00 Lunch
48
ORAL SESSION MON / 4
FLMR - Fluid Mechanics and Rheology (AUD. 2 - Blaise Pascal - Library) TIME CODE Multi-phase Flow
8:30 0130 FLMR73
Experimental investigation of forces acting on oil drops within ESP impellers, R.
Perissinotto, W. M. Verde, M. S. de Castro, A. Bannwart, J. L. Biazussi (Universidade
Estadual de Campinas)
8:50 0179 FLMR74
Effect of the flow macro-scale on the effective stresses in gas-solid riser flows, J.
Mouallem, S. R. A. Niaki (Escola de Engenharia de São Carlos), N. C. Cussy, G. J. S.
Netzlaff, C. Milioli, F. Milioli (Universidade de São Paulo)
9:10 0182 FLMR75
Effect of the flow macro-scale on the effective drag coefficient in gas-solid riser
flows, S. R. A. Niaki, J. Mouallem (Escola de Engenharia de São Carlos), N. C. Cussy,
G. J. S. Netzlaff, C. Milioli, F. Milioli (Universidade de São Paulo)
9:30 0210 FLMR76
Numerical simulation of the two-phase water-faucet flow using a single pressure
four equation model associated with the flux-corrected transport method, R. V. N.
de Freitas, C. Sondermann, R. A. C. Patricio, A. B. Figueiredo, G. C. R. Bodstein
(Universidade Federal do Rio de Janeiro), F. B. de F. Rachid (Universidade Federal
Fluminense)
9:50 0294 FLMR77 Numerical investigation of a new pipe wall design to reduce elbow erosion, C.
Duarte, F. Souza (Universidade Federal de Uberlândia)
10:10 Coffee-break
TIME CODE Multi-phase Flow
10:40 0303 FLMR78 Prove the cycloidal slotted anode efficiency by modeling the bubble flow, R. Moura
(Universidade Federal do Pará)
11:00 0336 FLMR79 Transient numerical simulation of two-phase flow using a compact scheme, B.
Rodrigues, E. S. Rosa (Universidade Estadual de Campinas)
11:20 0431 FLMR80
Two-phase flow stability analysis using a level set approach, B. M. Soares
(Universidade Federal Fluminense), M. R. Jotkar (Universidade Federal do Rio de
Janeiro), D. Rodriguez (Universidade Federal Fluminense)
11:40 0473 FLMR81
Experimental analysis of water/oil emulsion effective viscosity in pipeline, N. A. V.
Bulgarelli, J. L. Biazussi, M. S. de Castro, C. E. Perles, W. M. Verde, A. Bannwart
(Universidade Estadual de Campinas)
12:00 0541 FLMR82
Characterization of slug flow in annular duct, using high speed video camera,
annular wire-mesh sensor and PIV, M. M. H. Cely, V. E. C. Baptistella, O. M. H.
Rodriguez (Universidade de São Paulo)
12:20 Lunch
TIME CODE Multi-phase Flow
13:30 1022 FLMR83 An ALE-FEM method for axisymmetric two-phase flows, G. R. dos Anjos
(Universidade Estadual do Rio de Janeiro), E. Gros (EPFL)
13:50 1051 FLMR84 Prediction of pressure gradient in stratified liquid-liquid pipe flow with entrainment
effects, G. Bochio, O. M. H. Rodriguez (Universidade de São Paulo)
14:10 1073 FLMR85
Experimental validation by ultrasonic technique of the numerical analysis of an
ascendant flow under the influence of the centrifugal and gravitational fields, H. K.
Eidt, C. C. Rodrigues, R. Dunaiski, C. Y. Ofuchi, P. H. D. dos Santos, F. Neves Jr, R.
Morales (Universidade Tecnológica Federal do Paraná)
14:30 1187 FLMR86
Studies of hydrate accumulation under multiphase flow conditions, E. Straume, R.
Morales (Universidade Tecnológica Federal do Paraná), X. Zhang (Colorado
School of Mines), G. Grasso, A. Sum (Universidade Tecnológica Federal do Paraná)
14:50 1213 FLMR87
Experimental analysis of two-phase flow in a radial centrifugal pump, J. Cubas, H.
Stel, E. Ofuchi, D. Bertoldi, M. M. Neto, R. Morales (Universidade Tecnológica
Federal do Paraná)
15:10 1217 FLMR88
Influence of operational conditions on the trajectory of an air bubble inside a
centrifugal pump, E. Ofuchi, F. C. A. Jimenez, R. H. G. Sabino, H. Stel, D. Bertoldi,
M. M. Neto, R. Morales (Universidade Tecnológica Federal do Paraná)
15:30 1226 FLMR89 Analysis of slug flow in horizontal pipes, C. Cozin, B. P. Naidek, M. G. Conte, F. A.
Barbuto, R. Morales (Universidade Tecnológica Federal do Paraná)
49
ORAL SESSION TUE / 5
FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Multi-phase Flow
8:30 1372 FLMR90 Formation and properties of emulsions in heavy oil production, T. Botti, M. Moura,
M. Carvalho (Pontifícia Universidade Católica do Rio de Janeiro)
8:50 1454 FLMR91
Influence of hydrate-like solid particles in horizontal gas-liquid slug flows, R. F. Alves,
L. M. M. Rosas, C. L. Bassani (Universidade Tecnológica Federal do Paraná), F.
Schneider (Centro Universitário Autônomo do Brasil), M. J. da Silva, M. Marcelino
Neto, R. Morales, A. Sum (Universidade Tecnológica Federal do Paraná)
9:10 1717 FLMR92 Experimental characterization of horizontal pipe slug flow of air/shear-thinning fluid,
R. Baungartner, J. Loureiro, A. P. S. Freire (Universidade Federal do Rio de Janeiro)
9:30 1778 FLMR93
Analysis of influence of channel diameter on boiling of isobutane (R-600A), L.
Silveira, J. Copetti (Universidade do Vale do Rio dos Sinos), J. D. de Oliveira
(Universidade Federal de Santa Catarina)
9:50 1793 FLMR94
New correlations of flow boiling heat transfer coefficients based on R1234YF data, F.
N. Q. dos Santos (Centro Federal de Educação Tecnológica de Minas Gerais), M.
Barroso, J. J. G. Pabon, H. Augusto (Universidade Federal de Minas Gerais), P. E. L.
Barbieri (Centro Federal de Educação Tecnológica de Minas Gerais)
10:10 Coffee-break
TIME CODE Multi-phase Flow
10:40 1884 FLMR95
Computational assessment of a gas-liquid pipe system on the fluid-dynamics of a
high-temperature sulfidation corrosion mechanism, D. D. Ribeiro, F. C. Oliveira, J.
Neto, E. Oliveira (Petróleo Brasileiro S.A.)
11:00 1893 FLMR96 Formation and morphology of subaqueous Barchan dunes, C. A. Alvarez, E. de M.
Franklin (Universidade Estadual de Campinas)
11:20 2042 FLMR97
Experimental study of penetration depth produced by a plunging jet system, P. J. M.
Lugo, D. R. Sansão, L. E. Ortiz-Vidal, O. M. H. Rodriguez (Universidade de São
Paulo)
11:40 2133 FLMR98
Numerical simulation of two-phase slug flow from horizontal to downward inclined
pipe using a hybrid code based on slug tracking and two-fluid methodologies, V.
Almeida, M. G. Conte, C. Cozin, F. A. Barbuto, R. Morales (Universidade Tecnológica
Federal do Paraná)
12:00 2219 FLMR99 Evaluation of models for horizontal gas-non-newtonian slug flow, G. Gonçalves, R.
Baungartner, J. Loureiro, A. P. S. Freire (Universidade Federal do Rio de Janeiro)
12:20 Lunch
TIME CODE Multi-phase Flow
13:30 2241 FLMR100
Investigation of bubble breakup in sudden expansions and contractions, C. M. P.
Rosero, G. E. O. Celis, J. Loureiro, A. P. S. Freire (Universidade Federal do Rio de
Janeiro)
13:50 2284 FLMR101
Study of the velocity of elongated bubbles in two-phase slug flow in a horizontal
pipeline, F. E. C. Vicencio (Centro Universitário UniBrasil), W. Dobrychtop, C. A. C.
de Andrade, F. Schneider (Centro Universitário Autônomo do Brasil)
14:10 2292 FLMR102
Velocity field and hold up measurements for inclined gas jets in vertical liquid
crossflows, J. B. R. Loureiro, L. Guerra, A. Suaréz, A. P. Silva Freire (Universidade
Federal do Rio de Janeiro)
14:30 2448 FLMR103 Comparison of two-phase flow correlations for hypothetical production well, M. V. C.
Alves, E. Alves (Universidade do Estado de Santa Catarina)
14:50 2449 FLMR104 Innovative pseudo-transient well reservoir coupling, M. V. C. Alves, R. Alves, E. Alves
(Universidade do Estado de Santa Catarina)
15:10 2569 FLMR105
Study of local phase fraction in stratified dense-gas-liquid pipe flow using gamma-
ray densitometry, D. G. Chagas, T. Bicudo, L. E. Ortiz-Vidal, M. M. H. Cely, O. M. H.
Rodriguez (Universidade de São Paulo)
15:30 2843 FLMR106
Measurement of pressure loss in gas-liquid two-phase flow in a horizontal pipeline,
C. A. C. de Andrade, F. E. C. Vicencio, F. Schneider (Centro Universitário Autônomo
do Brasil)
50
ORAL SESSION WED / 6
FLMR - Fluid Mechanics and Rheology (AUD. 1 - Jonh Henry - Library) TIME CODE Rheology and Non-Newtonian Fluid Mechanics
8:30 0476 FLMR107
DNS of non-newtonian Giesekus fluid flow stability, A. C. Brandi, L. J. da S. Furlan
(Universidade Estadual Paulista Julio de Mesquita Filho), M. T. de Mendonça
(Instituto de Aeronáutica e Espaço), A. Silva, M. T. de Araujo, L. F. de Souza
(Universidade de São Paulo)
8:50 0505 FLMR108
Are the cooling rate, the crystals morphology and the yield stress directly related in
waxy oils? D. Andrade, M. Marcelino Neto, C. O. R. Negrao (Universidade
Tecnológica Federal do Paraná)
9:10 0507 FLMR109
An experimental study on determining the highest thermodynamic solid-liquid
equilibrium temperature for waxy oils, D. Andrade, M. Marcelino Neto, C. O. R.
Negrão (Universidade Tecnológica Federal do Paraná)
9:30 0662 FLMR110
Flow of elasto-viscoplastic thixotropic materials with free-surface, F. S. Alves
(Universidade Federal do Rio de Janeiro), R. Thompson (Universidade Federal
Fluminense)
9:50 0670 FLMR111
Rheological study of gas hydrates formed from carbon dioxide molecules, G. A. B.
Sandoval (Universidade Federal do Rio de Janeiro), E. Soares (Universidade Federal
do Espírito Santo), R. Thompson (Universidade Federal Fluminense), F. B. Campos
(PETROBRAS Petróleo Brasileiro S.A.), A. Teixeira (Universidade Federal do Rio de
Janeiro)
10:10 Coffee-break
TIME CODE Rheology and Non-Newtonian Fluid Mechanics
10:40 1033 FLMR112
Nonlinear eddy viscosity models for viscoelastic turbulence, A. Nieckele (Pontifícia
Universidade Católica do Rio de Janeiro), R. Thompson (Universidade Federal
Fluminense), G. Mompean (University Lille)
11:00 1203 FLMR113
On the link between Kolmogorov microscales and friction factor in non-newtonian
yielding fluids, H. Anbarlooei, A. P. S. Freire, C. M. M. Santos (Universidade Federal
do Rio de Janeiro)
11:20 1242 FLMR114 CFD analysis of grease flow behavior from labyrinth seals, L. Frose, T. Cousseau
(Universidade Tecnológica Federal do Paraná)
11:40 1409 FLMR115 Natural convection of viscoplastic fluids in a square enclosure, D. D. O. dos Santos, L.
P. B. Miranda (Universidade Federal de Uberlândia)
12:00 1490 FLMR116
Application of the KBKZ-PSM integral model to axisymmetric flows, C. Viezel, J.
Bertoco, M. Tomé (Universidade de São Paulo), M. Vynnycky (Royal Institute of
Technology)
12:20 Lunch
TIME CODE Rheology and Non-Newtonian Fluid Mechanics
13:30 1540 FLMR117
A numerical and experimental study of the pressure transmission in viscoplastic
fluids confined in pipelines, R. S. Mitishita, G. M. de Oliveira, C. O. R. Negrao
(Universidade Tecnológica Federal do Paraná)
13:50 1826 FLMR118
Evaluating the influence of polymers on the identification of vortices, R. Martins
(Universidade Federal do Espírito Santo), J. R. Andrade (Universidade Federal de
Uberlândia), R. Thompson (Universidade Federal Fluminense), G. Mompean
(University of Lille, France)
14:10 1899 FLMR119
An experimental investigation of the temperature influence on the viscous modulus
and gelation transition of a polymeric solution, I. D. O. Pereira (Universidade de
Brasília), F. R. Cunha (Universidade de Brasília)
14:30 1954 FLMR120 Complex fluid flow through a constricted microchannel, J. A. F. Gutiérrez, M. Moura,
M. Carvalho (Pontifícia Universidade Católica do Rio de Janeiro)
14:50 2098 FLMR121
Numerical analysis of power law fluid flow in a channel partially filled by a porous
medium using the lattice Boltzmann method, R. Meira, F. C. de Lai, C. O. R. Negrao,
S. Junqueira (Universidade Tecnológica Federal do Paraná)
15:10 2213 FLMR122 Numerical study of heat transfer in non-newtonian fluids, L. Nunes (Universidade
Regional Integrada do Alto Uruguai e das Missões)
15:30 2742 NUCE1
Experimental analysis of critical velocity in flat plate fuel element for nuclear research
reactor, A. J. A. de Castro, D. Andrade (Instituto de Pesquisas Energéticas e
Nucleares)
51
ORAL SESSION THU / 7
FRFS - Fracture, Fatigue, and Structural Integrity (Room 5 – Bldg. 4) TIME CODE Fracture, Fatigue, and Structural Integrity
8:30 0249 FRFS1
Modes I and II fatigue induced delamination in co-cured composite structural joints,
F. Gonzalez, F. Garpelli, N. N. Silveira, R. Sales (Instituto Tecnológico de
Aeronáutica), M. Shiino (Universidade Estadual Paulista Julio de Mesquita Filho),
M. Arbelo, M. Donadon (Instituto Tecnológico de Aeronáutica)
8:50 0534 FRFS2 The use of XFEM for stress intensity factor estimation of surface cracks, G. Coêlho,
A. A. Silva, M. A. dos Santos (Universidade Federal de Campina Grande)
9:10 0600 FRFS3 Cyclic deformation and fatigue of 7050-T7451 aluminum alloy, K. V. Fabara, C. B. de
Barros, F. Castro, J. Ferreira (Universidade de Brasília)
9:30 0621 FRFS4 Numerical/experimental analysis of the crack trajectory in mixed-mode loading, A.
Pinto, J. Ferreira (Universidade de Brasília),
9:50 0680 FRFS5
Crack initiation test in bending fatigue: detecting by the loss of gas-tightness, J. F.
Dias (Universidade de Itaúna), T. L. Camargos (Universidade Federal de Minas
Gerais), E. A. S. Nogueira (Fundação Universidade de Itaúna), D. Carmo (SENAI), G.
Ribeiro, A. M. Figueiredo (Universidade Federal de Minas Gerais)
10:10 Coffee-break
TIME CODE Fracture, Fatigue, and Structural Integrity
10:40 0684 FRFS6
Analysis of mixed-mode stress intensity factors using digital image correlation
displacement fields, J. G. D. Rodríguez, G. Gonzales, J. A. O. Gonzalez, J. Freire
(Pontifícia Universidade Católica do Rio de Janeiro)
11:00 0723 FRFS7
Structural behavior of co-bonded composite structures subject to mode I and mode
II fatigue induced delamination. F. Garpelli, F. Gonzalez, N. N. Silveira, M. Arbelo,
M. Donadon, R. Sales (Instituto Tecnológico de Aeronáutica), M. Shiino
(Universidade Estadual Paulista), H. Resende (Instituto de Pesquisas Tecnológicas
do Estado de São Paulo)
11:20 0873 FRFS8 A BEM implementation for nonhomogeneous and anisotropic fracture mechanics. F.
Simionato, C. Daros (Universidade Estadual de Campinas)
11:40 1356 FRFS9
Influence of roughness and surface finish to reduction of wear and friction, D. R. da
S. Medeiros, E. A. de Faria, V. Mello, S. Alves (Universidade Federal do Rio Grande
do Norte)
12:00 Lunch
TIME CODE Fracture, Fatigue, and Structural Integrity
13:30 1359 FRFS10
Numerical analysis of residual stresses on autogenous welding of an ASTM A106 gr.
B small diameter pipe from oil and gas industry, H. A. da S. Pereira, M. C.
Rodrigues (Universidade Federal da Paraíba)
13:50 1512 FRFS11
Fatigue characterization of the C36000 copper alloy using the thermographic
method, L. Rego, J. T. P. Castro, J. Freire, V. Paiva (Pontifícia Universidade Católica
do Rio de Janeiro)
14:10 1567 FRFS12 Behavior of the distribution of life in notched components according to TCD (Theory
of Critical Distance), J. Dias, J. Ferreira, L. Silva (Universidade de Brasília)
14:30 1824 FRFS13 A fast rotating bending fatigue test machine, R. de M. Nogueira, M. A. Meggiolaro,
J. T. P. Castro (Pontifícia Universidade Católica do Rio de Janeiro)
14:50 2065 FRFS14
Study on the dissipation of kinetic energy in impact of free-fall objects on metallic
plates and its associated plastic deformation, C. M. Clemente, H. Moura
(Universidade de Brasília)
15:10 2100 FRFS15
Experimental validation of unloading compliance solutions applicable to C(t) and
SE(b) specimens, G. H. B. Donato, R. Barros, J. F. de Carvalho Jr (Centro
Universitário da FEI)
15:30 2130 FRFS16
Effects of crack tunneling on the elastic unloading compliance of SE(b) specimens -
current limitations and proposals, L. G. F. Andrade, G. H. B. Donato (Centro
Universitário da FEI)
52
ORAL SESSION FRI / 8
FRFS - Fracture, Fatigue, and Structural Integrity (Room 5 – Bldg. 4) TIME CODE Fracture, Fatigue, and Structural Integrity
8:30 2239 FRFS17 A strip-yield algorithm to predict fatigue crack closure and growth, S. E. Ferreira, J.
T. P. Castro, M. A. Meggiolaro (Pontifícia Universidade Católica do Rio de Janeiro)
8:50 2299 FRFS18
Impedance-based structural health monitoring analysis for damage identification on
a rotor, I. G. Faria, V. Sant'Ana, R. M.F. Neto, K. M. Tsuruta (Universidade Federal
de Uberlândia)
9:10 2395 FRFS19
Fatigue limit determination of a low carbon steel using the thermographic
technique, C. F. C. Bandeira, P. P. Kenedi (Centro Federal de Educação Tecnológica
Celso Suckow da Fonseca), J. T. P. Castro (Pontifícia Universidade Católica do Rio
de Janeiro)
9:30 2508 FRFS20
Se(b) specimens under 4-point bending - recommended roller span and solutions
for Ki and elastic compliance, G. H. B. Donato, K. L. Carvalho, V. A. Lucas Göltl
(Centro Universitário da FEI)
9:50 2560 FRFS21
Failure analysis on equipment maintenance of a crushing unit, H. Augusto
(Universidade Federal de Minas Gerais), N. Oliveira (Pontifícia Universidade
Católica de Minas Gerais), D. C. Dutra (Universidade Federal de Minas Gerais), J.
de S. Ramos (Universidade Estadual do Rio de Janeiro), C. A. Fonseca (Pontifícia
Universidade Católica de Minas Gerais)
10:10 Coffee-break
53
ORAL SESSION THU / 7
HVAC - Heating, Ventilation, Air-Conditioning and Refrigeration (AUD.2 - Blaise Pascal - Library) TIME CODE HVAC
8:30 Invited Current refrigerant landscape in the context of Kigali 2016 agreement and the
potential role of natural refrigerants, Z. Ayub (Isotherm Inc., USA)
9:10 0367 HVAC1
Mathematical model of an automotive air-conditioning system under steady-state
conditions, D. L. da Silva, G. M. de Cordova (Universidade Federal de Santa
Catarina)
9:30 0940 HVAC2 Integration of urban microclimate in building energy simulation, A. Gros (Pontifícia
Universidade Católica)
9:50 1475 HVAC3
Development of a new entrance chamber for continuous vortex tube operation at
low pressures, H. Lopez, M. E. V. da Silva, P. A. C. Rocha (Universidade Federal do
Ceará)
10:10 Coffee-break
10:40 1482 HVAC4 The influence of buildings envelope on its energetic efficiency, B. Ferrari, P. R.
Wander, D. Medeiros (Universidade do Vale do Rio dos Sinos)
11:00 1874 HVAC5 Performance evaluation of pet panel for direct evaporative cooling, J. M. Pereira
(Universidade Federal do Piauí), J. Pimenta, M. Siqueira (Universidade de Brasília)
11:20 1898 HVAC6
Thermal comfort conditions in a classroom conditioned by a split-type system, A. da
S. Jr, R. Vilain, M. Pereira (Instituto Federal de Santa Catarina), N. Mendes
(Pontifícia Universidade Católica do Paraná), K. Cordeiro (CESI - Ecole d´Ingineurs)
11:40 2206 HVAC7 Study of thermal conditioning of greenhouses with ground-coupled heat
exchangers, L. Romeo, C. Díaz, P. Galione (Universidad de la República)
12:00 Lunch
TIME CODE Refrigeration
13:30 0401 HVAC8
Effects of solar radiation in a direct expansion solar assisted CO2 heat pump, T. F.
Paulino, R. N. de Oliveira, L. Machado, R. Koury (Universidade Federal de Minas
Gerais)
13:50 0403 HVAC9
Distributed model to achieve the steady state through the false transient in a solar
assisted heat pump, T. F. Paulino (Universidade Federal de Minas Gerais), R. N. de
Oliveira (Centro Federal de Educação Tecnológica de Minas Gerais), L. Machado,
R. Koury (Universidade Federal de Minas Gerais)
14:10 1031 HVAC10
Thermal and cost assessment of an absorption refrigeration system, F. R. P. Arrieta,
L. A. Nogueira, V. P. M. de Oliveira, W. M. dos S. Vieira Jr (Pontifícia Universidade
Católica)
14:30 1067 HVAC11
Performance of magnetic refrigerators operating with different magnetic profiles, F.
P. Fortkamp, G. B. Lang, J. Lozano, J. Barbosa (Universidade Federal de Santa
Catarina)
14:50 1258 HVAC12 Transient heat transfer analysis of a wine storage cabinet, R. S. Calomeno, N. M. de
Sá, J. Lozano, J. Barbosa (Universidade Federal de Santa Catarina)
15:10 1307 HVAC13
A cascade R134A/R744 refrigeration cycle thermal analysis: evaluation of the
intermediate heat-exchanger parameters, C. S. Bresolin (Universidade Federal do
Rio Grande do Sul)
15:30 2167 HVAC14
Study of the thermodynamic performances of a refrigeration system with variable
rotation compressor and electronic expansion valve, Y. A. B. Cutrim, L. F. M. Moura
(Universidade Estadual de Campinas)
54
ORAL SESSION FRI / 8
HVAC - Heating, Ventilation, Air-Conditioning and Refrigeration (AUD.2 - Blaise Pascal - Library) TIME CODE Refrigeration
8:30 1773 HVAC15 Designing an active magnetic regenerator for a fixed magnetic circuit, G. F. Peixer, J.
Lozano, J. Barbosa (Universidade Federal de Santa Catarina)
8:50 1801 HVAC16
Modeling of a variable speed compressor applied to a domestic refrigerator, Á.
Gardenghi, L. C. Gómez (Universidade de São Paulo), J. F. Lacerda (Tecumseh do
Brasil Ltda.)
9:10 1919 HVAC17 Numerical analysis of hot-wall condensers for domestic refrigerators, A. L. Seixlack, R.
Lima (Universidade Estadual Paulista Julio de Mesquita Filho)
9:30 2127 HVAC18 Fault detection algorithm for temperature sensors of household refrigerators, E.
Machado, A. S. Silveira, A. Trofino, C. Melo (Universidade Federal de Santa Catarina)
9:50 2466 HVAC19 CO2 concentration control system in teaching institutions, C. Silva, L. M. Carvalho, L.
G. G. K. Gesteira (Instituto Federal da Bahia)
10:10 Coffee-break
55
ORAL SESSION MON / 4
MMEN1 - Materials and Manufacturing Engineering (AUD.3 - Mário de Abreu - Bldg. 3 / Verde) TIME CODE Union and Assembly Processes
8:30 Invited Latest welding for high strength and toughness - friction stir welding of steels without
transformation. H. Fujii (Osaka University, Japan)
9:10 0508 MMEN1
Comparing the dynamic response of bead-on-plate and butt welded plates, V.
Macanhan (Laboratório Nacional de Astrofísica), E. Correa (Universidade Federal de
Itajubá), J. T. da Silva (Laboratório Nacional de Astrofísica)
9:30 0570 MMEN2 Improving composites single-lap joint performance by carbon nanotubes, E. C.
Monteiro, A. Avila (Universidade Federal de Minas Gerais)
9:50 0658 MMEN3
Study on the effects of welding parameters on force and temperature during Friction
Stir Spot Welding of AA6060-T5, I. C. Góss, T. Rosendo, C. Aita, M. A. D. Tier, A.
Wiedenhoft (Universidade Federal do Pampa)
10:10 Coffee-break
TIME CODE Union and Assembly Processes
10:40 0683 MMEN4
Residual stresses in aluminum alloy AA7475-T761 using X-Ray diffraction technique,
J. P. Perandini, S. Delijaicov (Centro Universitário da FEI), H. Resende, M. H. Batalha
(Instituto de Pesquisa Tecnológica do Estado de São Paulo)
11:00 0803 MMEN5 Dimensioning of a protective gas mixer for electric arc welding, F. Moro, N. F. S.
Neto (Universidade Estadual de Maringá)
11:20 0904 MMEN6 Application of the Monte Carlo method in time and cord geometry in welding, F.
Moro, N. F. S. Neto, L. Nagima (Universidade Estadual de Maringá)
11:40 1259 MMEN7
The effect of welding current on mechanical behavior of resistance-spot welded
TWIP steel joints, T. Colombo , G. dos Santos, A. Faria (Instituto Tecnológico de
Aeronáutica), V. Braga, L. F. R. Junior (Centro Universitário Franciscano)
12:00 2304 MMEN8
Digital radiographic inspection and chracterization of defects in joined aluminium
alloy AA5083 for shipbuilding by the friction stir welding (FSW), L. C. F. Filho, D. de S.
Queiroga, R. Santos, T. Rolim, H. Fujiwara, A. Shinohara, A. Ono (Universidade
Federal de Pernambuco), H. Fujii (Osaka University, Japan)
12:20 Lunch
TIME CODE Union and Assembly Processes
13:30 1468 MMEN9 Analysis of welding distortion in naval steel with heat input variation, W. R. de F.
Junior, R. Monteiro, A. Bracarense (Universidade Federal de Minas Gerais)
13:50 2078 MMEN10
316L Stainless Steel diffusion bonding optimized parameters, L. Mateus, G.
Nuernberg, G. Rosinski, P. Gonçalves, M. Mortean, R. H. G. e Silva (Universidade
Federal de Santa Catarina), A. Monteiro (Universidade Federal do Rio de Janeiro),
M. Mantelli (Universidade Federal de Santa Catarina)
14:10 2570 MMEN11 Analysis of torque in friction stir welding by inverse problem method, K. J. Quintana,
J. L. Silveira (Universidade Federal do Rio de Janeiro)
14:30 2656 MMEN12
Analysis of the effect of spot welding current on the mechanical behavior and failure
modes of automotive steel sheets, T. Colombo, F. do M. Sena, J. Faria, A. Faria
(Instituto Tecnológico de Aeronáutica)
14:50 2842 MMEN13
Study of friction stir spot welding parameters for an aluminum alloy AA2024- T3, A.
P. de O. Costa, A. da S. Alves, L. M. dos Santos, P. Brito, S. S. F. de Dafé (Pontifícia
Universidade Católica de Minas Gerais)
15:10 5511 MMEN14 Virtual environment to part assembly using displacement coordinates, J. C. Linhares
(Universidade Federal de Santa Catarina)
15:30 -- -- --
56
ORAL SESSION TUE / 5
MMEN1 - Materials and Manufacturing Engineering (AUD.3 - Mário de Abreu - Bldg. 3 / Verde) TIME CODE Metallurgical Processes
8:30 0096 MMEN15
Influence of austenitization at different temperatures on the mechanical properties
and on the microstructure of hot stamped parts, T. Pinheiro, S. Button (Universidade
Estadual de Campinas)
8:50 0334 MEMN16
Effects of preheating temperature and welding current on weld bead geometry in the
submerged arc welding process, W. Bevilaqua, M. G. Antonello, C. Scheuer
(Universidade Federal de Santa Maria)
9:10 0925 MMEN17
The method of finite differences applied to descripition of a mettalic component, B.
de Castro, L. Trevisan, J. Donadel (Instituto Federal de Educação, Ciência e
Tecnologia do Rio Grande do Sul)
9:30 0973 MMEN18 Characterization of the 410 NiMo coating using TIG process of welding, A. C. G.
Pitoli, E. F. T. Olivio (Universidade Tecnológica Federal do Paraná)
9:50 1103 MMEN19 Incremental Sheet Forming of Aluminum with Heat for Complex Pieces, P. J. da
Silva, A. Alvares (Universidade de Brasília)
10:10 Coffee-break
TIME CODE Metallurgical Processes
10:40 1381 MMEN20
Mechanical properties in function of strain rate of AISI 304 austenitic stainless steels:
a comparative study at room and cryogenic temperatures, M. Azevedo, M. T. Izumi,
M. Crivoi, R. S. Namur, O. Cintho (Universidade Estadual de Ponta Grossa)
11:00 1663 MMEN21
Analysis of the mechanical behavior in the interface of the buttering weld of steel
AISI 4130 with Inconel 625, J. Silva, R. de Santana, D. Beltrão, A. Marcos
(Universidade Federal da Paraíba)
11:20 2009 MMEN22 Porous-media braking of electromagnetic stirring in the continuous casting of steel,
M. Vynnycky (Royal Institute of Technology)
11:40 2171 MMEN23
Hot deformation simulation of modified AISI 5120 low alloy steel, D. Boschetti
(Universidade Estadual de Campinas), A. P. Braga (Instituto de Pesquisas
Tecnológicas do Estado de São Paulo ), P. F. da S. Farina (Universidade Estadual de
Campinas)
12:00 Lunch
TIME CODE Metallurgical Processes, Processes with Material Removal
13:30 2328 MMEN24
Effect of the oxide film on the sliding wear behavior of a CoCrMoSi alloy hardfacing
coating, A. S. D'Oliveira (Universidade Federal do Paraná), J. M. Claros (Corporación
Mexicana de Investigación en Materiales S. A. de C. V.), E. Nascimento
(Universidade Tecnológica Federal do Paraná)
13:50 2335 MMEN25
EDM and turning machining surface preparation influence on the adhesion of
aluminum thermally sprayed coatings, G. M. Bozza, A. G. M. Pukasiewicz, A. Derrien,
M. V. de Carvalho, I. Santos (Universidade Tecnológica Federal do Paraná)
14:10 2398 MMEN26
Tribological behavior of jaspilite evaluated by micro-scratch test, R. Magnol
(Universidade Federal do Espírito Santo), M. Macedo (Geosol Geologia e
Sondagens SA), M. de Macêdo, C. Scandian (Universidade Federal do Espírito
Santo)
14:30 0002 MMEN27
A study about the effects of emulsifiable oil concentration over the roughness in
automotive aluminum, Al-Si (10 ~ 12%), parts, after milling using a PCD tool, G.
Fernandes, M. Gomes (Universidade Federal de Minas Gerais), A. A. Silva (Instituto
Euvaldo Lodi), P. R. Lopes (Universidade Federal de Minas Gerais), P. Sérgio, L. H. A.
Maia, Í. B. dos Santos (Pontifícia Universidade Católica de Minas Gerais), B. Siqueira
(Universidade Federal de São João del Rei)
14:50 0098 MMEN28
Drilling of high strength grey iron, grade 300, with refined graphite and Mo addition,
A. E. da Silva (Faculdade Anhanguera de Anápolis), A. Reis(Universidade Federal de
Uberlândia), A. R. Machado (Pontifícia Universidade Católica do Paraná), W. L.
Guesser (Universidade do Estado de Santa Catarina)
15:10 0203 MMEN29
An analysis of surface roughness in turning/boring under different chatter conditions,
G. S. Venter (Universidade de São Paulo), M. M. da Silva (Universidade de São
Paulo)
15:30 0525 MMEN30 Cutting speed: effect on cutting forces and process damping in milling of 7050 T7451
aluminum, R. Mundim, A. V. Borille (Instituto Tecnológico de Aeronáutica)
57
ORAL SESSION WED / 6
MMEN1 - Materials and Manufacturing Engineering (AUD.3 - Mário de Abreu - Bldg. 3 / Verde) TIME CODE Processes with Material Removal
8:30 0635 MMEN31 Effects of mql on workpiece temperature and hole quality in deep drilling of SAE
4144M steel, M. Polli, M. J. Cardoso (Universidade Tecnológica Federal do Paraná)
8:50 0717 MMEN32
Steel for mechanical applications: machinability evaluation of three similar medium-
carbon alloys, A. D. Canal (universidade federal de viçosa), R. Mundim, P.
Montenegro, A. V. Borille (Instituto Tecnológico de Aeronáutica), E. O. Lucas
(Universidade Federal de Viçosa)
9:10 0848 MMEN33
A two-step approach to milling of thin walls encompassing constant cutting force
and passive damping, R. Mundim, A. V. Borille (Instituto Tecnológico de
Aeronáutica)
9:30 0967 MMEN34
Analysis of the influence of the hole depth on the geometric quality of the machined
part, when the cutting fluid and the machining parameters are varied, C. Ramos , E.
S. Costa, P. H. P. França, L. R. R. da Silva, W. Sales (Universidade Federal de
Uberlândia), Á. R. Machado (Pontifícia Universidade Católica do Paraná)
9:50 1133 MMEN35
Performance evaluation of coated tungsten cemented carbide drills in cast iron
drilling under different lubri-coolant conditions, L. R. R. da Silva (Universidade
Federal de Uberlândia
10:10 Coffee-break
TIME CODE Processes with Material Removal
10:40 1373 MMEN36
A discussion about the effectiveness of the shot peening over the fatigue behaviour of
mettalic materials, D. G. Ribeiro, A. Í. S. Antonialli, R. P. Morais (Universidade
Federal de São Carlos)
11:00 1584 MMEN37
The MQL's atmospheric air temperature influence in SAE 4340 steel cylindrical
grinding using CBN grinding wheel, E. C. Bianchi, A. P. Francelin, K. M. Fragoso , J. C.
Lopes, H. J. de Mello, L. Sanchez, P. Aguiar (Universidade Estadual Paulista -
Faculdade de Engenharia de Bauru)
11:20 1592 MMEN38 Numerical and experimental models for orthogonal cutting, L. M. A. Borges, F.
Figueiredo, J. L. Silveira, N. Dimas (Universidade Federal do Rio de Janeiro)
11:40 1690 MMEN39
Performance evaluation of a synthesized cutting fluid base, made from modified
glycerin, using aluminum bars in turning operation, G. Fernandes, M. Gomes, P. R.
Lopes (Universidade Federal de Minas Gerais), S. Clayton, L. H. A. Maia, P. Sérgio, B.
Jakitsch, Í. B. dos Santos (Pontifícia Universidade Católica de MInas), A. A. Silva
(Instituto Euvaldo Lodi), B. Siqueira (Universidade Federal de São João del Rei)
12:00 Lunch
TIME CODE Processes with Material Removal
13:30 1813 MMEN40
Evaluation of the chip separation mechanism during machining of an austenitic
stainless steel, G. M. Chagas (Instituto Federal de Santa Catarina), I.
Machado(Universidade de São Paulo)
13:50 1834 MMEN41
Analysis of the influence of the hole depth on the geometric quality of the machined
part, when the cutting fluid and the machining parameters are varied, C. Ramos, E.
S. Costa, P. H. P. França, L. R. R. da Silva, W. Sales (Universidade Federal de
Uberlândia), Á. R. Machado (Pontifícia Universidade Católica do Paraná)
14:10 1947 MMEN42 Built up layer formation in the super duplex stainless steel turning, J. Gamarra, A.
Diniz (Universidade Estadual de Campinas)
14:30 2055 MMEN43
Cavitation erosion resistance of a Co28Cr22Fe alloy, M. C. Romero , J. Barbarioli
(Universidade Federal do Espírito Santo), A. Tschiptschin (Universidade de São
Paulo), C. Scandian (Universidade Federal do Espírito Santo)
14:50 2109 MMEN44
Assessing the environmental impacts of milling processes, G. Protazio (Universidade
Estadual de Campinas), R. de S. Zanuto (IFCE-Campus de Sobral), A. Hassui
(Universidade Estadual de Campinas), F. Lima (Universidade Federal do Ceará)
15:10 2151 MMEN45 Vortex tube air cooling in the turning, R. Viana, D. Araujo, D. B. Sousa, D. dos S.
Oliveira, J. Goulart (Universidade de Brasília)
15:30 2173 MMEN46
Surface finish evaluation of AISI VP 100 after grinding with MQL technique with
different flow rates, R. B. da Silva, B. Abrão, M. F. Pereira (Universidade Federal de
Uberlândia), C. Guimarães (Instituto Federal do Triângulo Mineiro), L. S. V. da Silva,
R. Ruzzi (Universidade Federal de Uberlândia), E. C. Bianchi (Universidade Estadual
Paulista - Faculdade de Engenharia de Bauru), Á. R. Machado (Pontifícia
Universidade Católica do Paraná)
58
ORAL SESSION THU / 7
MMEN1 - Materials and Manufacturing Engineering (AUD.3 - Mário de Abreu - Bldg. 3 / Verde) TIME CODE Processes with Material Removal
8:30 Invited Innovative perspective in the development and processing of difficult-to-cut alloys for
manufacturing activities, E. Ezugwu (Air Force Institute of Technology, Nigeria)
9:10 2156 MMEN47
Machining optimization analysis for the production of C110 steel specimen, N. C.
Andrade (Universidade Federal de Minas Gerais), H. do B. S. X. Moreira (Centro
Universitário UNA), P. Sérgio (Pontifícia Universidade Católica de Minas Gerais), E.
Cheikh (ABCM), F. Andrade (Centro Universitário Una), C. A. de S. Neves (Pontifícia
Universidade Católica de Minas Gerais), G. Fernandes (Universidade Federal de
Minas Gerais)
9:30 2212 MMEN48 Influence of lubricant on sliding wear of AISI 304, C. M. Clemente, E. G. C. Galárraga
(Universidade de Brasília)
9:50 2220 MMEN49
Analysis of the relationship between metal removal rate and energy consumption in
milling, R. Santos, M. Pereira, J. C. E. Ferreira (Universidade Federal de Santa
Catarina)
10:10 Coffee-break
TIME CODE Processes with Material Removal
10:40 2379 MMEN50 Aspects of Ti-6Al-4V drilling, M. Ribeiro, R. P. Gama (Universidade Estadual Paulista
Júlio de Mesquita Filho)
11:00 2413 MMEN51
Study of a bench milling machine refrigeration system for laboratory environment, E.
Cheikh, F. Andrade, V. Costa (Centro Universitário UNA), P. Sérgio (Pontifícia
Universidade Católica de Minas Gerais), G. Fernandes, M. Gomes (Universidade
Federal de Minas Gerais), A. A. Silva (Instituto Euvaldo Lodi)
11:20 2501 MMEN52 The vibration influence over CBN tool life in hardened boring operations using tool
overhangs, W. Silva, A. Diniz, D. Suyama (Universidade Estadual de Campinas)
11:40 2789 MMEN53
Comparative analysis of two CBN grinding wheels performance in nodular cast iron
plunge grinding, E. C. Bianchi, L. de M. Fernandes, J. C. Lopes, R. S. Volpato, P.
Aguiar (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru),
A.Diniz (Universidade Estadual de Campinas), H. J. de Mello (Universidade Estadual
Paulista - Faculdade de Engenharia de Bauru)
12:00 Lunch
TIME CODE Processes with Material Removal
13:30 2791 MMEN54
Analyzing the efficiency of the compressed air cleaning allied to the addition of water
in the mql in grinding the AISI 4043 steel with CBN, E. C. Bianchi, B. Sato, J. C. Lopes,
L. Sanchez, P. Aguiar (Universidade Estadual Paulista)
13:50 2857 MMEN55
Cylindrical external plunge grinding of AISI 4340 steel with interrupted geometry, E.
C. Bianchi, D. Mello, H. J. de Mello, R. L. Rodriguez, J. C. Lopes (Universidade
Estadual Paulista)
14:10 5609 MMEN56
Validation of a power measurement system in the milling process using hall sensors,
L. R. R. da Silva, K. Okada, G. M. de Carvalho, E. S. Costa (Universidade Federal de
Uberlândia), Á. R. Machado (Pontifícia Universidade Católica do Paraná)
14:30 5910 MMEN57
Hard turning of induction hardened SAE 1045 steel with PCBN tools under dry
machining and minimum quantity of lubrication (MQL), M. A. Sampaio, F. L.
Amorim, R. Torres, Á. R. Machado (Pontifícia Universidade Católica do Paraná)
14:50 5919 MMEN58
Analysis of the influence of cutting edge preparation in gun drill wear in deep drilling
of AISI 4144M, M. Polli, L. Campos, R. Curce, M. J. Cardoso, M. Santana
(Universidade Tecnológica Federal do Paraná)
15:10 -- -- --
15:30 -- -- --
59
ORAL SESSION FRI / 8
MMEN1 - Materials and Manufacturing Engineering (AUD.3 - Mário de Abreu - Bldg. 3 / Verde) TIME CODE Additive Manufacture
8:30 Invited Customized machining process solutions for high productivity with Iscar technology,
E. S. Marreto (Iscar do Brasil)
9:10 0124 MMEN59 Residual thermal stress in fused deposition modelling, R. Q. de Macedo, R. T. L.
Ferreira (Instituto Tecnológico de Aeronáutica)
9:30 0135 MMEN60
3D printed PLA and PLA reinforced with short carbon fibers: an experimental
characterization, R. T. L. Ferreira, R. T. L. Ferreira, I. Amatte, T. Dutra (Instituto
Tecnológico de Aeronáutica), D. Bürger (Instituto de Aeronáutica e Espaço)
9:50 0280 MMEN61
Effect of finishing processes on the surface quality of titanium parts manufactured by
the Laser Powder Bed Fusion process, M. F. Cruz (Embraer), A. V. Borille (Instituto
Tecnológico de Aeronáutica), R. Kersting, T. B. Klein (Fraunhofer IPK)
10:10 Coffee-break
TIME CODE Additive Manufacture
10:40 1260 MMEN62
A design for additive manufacturing method of direct metal parts for aerospace
applications, M. F. Cruz (Embraer), A. V. Borille, L. G. Trabasso (Instituto Tecnológico
de Aeronáutica), C. R. P. de Haro, F. Brandão (Embraer)
11:00 2359 MMEN63
Definition of parameters by process of additive manufacturing for tactile perception,
R. L. Vieira, S. R. Marchi, M. L. Okimoto, A. Marques, R. S. C. Paredes (Universidade
Federal do Paraná)
11:20 2730 MMEN64
Simulation study to evaluate the use of fully 3D printed injection molds optimized by
topology, V. E. Beal, P. L. Pereira (SENAI CIMATEC), A. Silva (Universidade Federal
da Bahia), L. A. G. Junior (SENAI CIMATEC)
11:40 -- -- --
12:00 Lunch
60
ORAL SESSION MON / 4
MMEN2 - Materials and Manufacturing Engineering (AUD.4 - Carlos Costa - Bldg. 3 / Verde) TIME CODE Project and Management
8:30 0188 MMEN65 Project and construction of a polymer flow test device, A. Kuhl (Univille), S. Gomes
(Instituto Federal de Santa Catarina)
8:50 0254 MMEN66
Development of an automated multiprocess welding mechanism, J. B. Gonçalves, I.
M. Nunes, L. R. R. da Silva, D. R. S. da S. Araújo, G. Souza (Instituto Federal de
Educação Ciência e Tecnologia do Espirito Santo), A. C. B. Zancanella (Universidade
Federal do Espírito Santo)
9:10 0375 MMEN67
Application of a systemic hazard analysis to launch and rescue operation of a
microgravity suborbital space vehicle, J. Fulindi, R. Pirk, L. E. L. da Costa (Instituto
Tecnológico de Aeronáutica)
9:30 0850 MMEN68
Quality management and six sigma: comparing two approaches in the
petrochemical sector, L. Fuscaldi, F. Aquino, L. Bernardino (Universidade Federal da
Bahia), H. Lepikson (SENAI), A. S. Barbosa, A. R. de Jesus (Universidade Federal da
Bahia)
9:50 1361 MMEN69
Hazards identification and risk assessment in a student mechanical workshop, A. E.
Rocha Filho, B. Z. Haselein, P. H. Z. Messerschmidt, R. Serafin, A. Dias (Universidade
Federal de Santa Catarina)
10:10 Coffee-break
TIME CODE Project and Management
10:40 1404 MMEN70 Effects of design for maintainability in complex aircraft systems, E. A. P. Barreto, F. T.
M. Abrahão (Instituto Tecnológico de Aeronáutica)
11:00 1714 MMEN71
Evaluation of the application of spherical roller bearing in flywheel used in belt
conveyors, M. Rios (Pontifícia Universidade Católica de Minas Gerais), C. Vimieiro
(Universidade Federal de Minas Gerais)
11:20 1748 MMEN72 A multi-criteria based approach for the production distribution in the poultry
industry, W. R. Monteiro, G. R. Meza (Pontifícia Universidade Católica do Paraná)
11:40 1902 MMEN73 The lean product development: an application to refrigeration industry, M. S. de
Oliveira, F. Forcellini, J. Lozano, J. Barbosa (Universidade Federal de Santa Catarina)
12:00 Lunch
TIME CODE Project and Management
13:30 1975 MMEN74
Development of the mechanical structure of an active monoarticular orthosis for
lower limb, E. Caetano, D. R. S. da S. Araújo, L. L. B. Bandeira (Instituto Federal de
Educação Ciência e Tecnologia do Espirito Santo), A. C. B. Zancanella (Universidade
Federal do Espírito Santo)
13:50 2015 MMEN75
Weight reduction of the pickup cargo bed by replacing metal panels with polymer
composite materials, I. Pompeu, L. S. Vitorino, A. Avila (Universidade Federal de
Minas Gerais)
14:10 2052 MMEN76 Applying the lean-triz hybrid approach into toyota kata for manufacturing systems
improvement, T. B. Fernandes, F. Forcellini (Universidade Federal de Santa Catarina)
14:30 2095 MMEN77
A lean six sigma implementation model based on critical success factors, A. B.
Ribeiro, F. Forcellini, M. Pereira, H. A. Ferenhof (Universidade Federal de Santa
Catarina)
14:50 2905 MMEN78 Statistical process control application in automotive industry, E. Teixeira, T. Dias, M.
Andrade, A. Oliveira (Universidade de Brasília)
15:10 2170 MMEN79 Project and development of an underwater vehicle in the shape of a sea turtle, A. H.
M. Bezerra, M. B. Nogueira (Universidade Federal do Rio Grande do Norte)
15:30 -- -- --
61
ORAL SESSION TUE / 5
MMEN2 - Materials and Manufacturing Engineering (AUD.4 - Carlos Costa - Bldg. 3 / Verde) TIME CODE Materials Characterization and Processing
8:30 0330 MMEN80
Study of the dynamic properties of a SMA mechanically shaped by hot rolling and
ECAE, P. S. dos S. Barbosa, N. Silva (Instituto Federal de Pernambuco), C. Gonzalez,
C. Oliveira (Universidade Federal de Pernambuco), C. J. de Araujo (Universidade
Federal de Campina Grande)
8:50 0444 MMEN81
Evaluation of interfacial fibre/matrix strength in natural hybrid composites, R. de A.
A. Lima, D. K. Cavalcanti, J. Neto, H. Costa, R. A. A. de Aguiar, D. Banea (Centro
Federal de Educação Tecnológica Celso Suckow da Fonseca)
9:10 0446 MMEN82
Mechanical characterization of hybrid natural fibers composites, D. K.Cavalcanti, J.
Neto, R. de A. A. Lima, S. R. de Barros, D. Banea (Centro Federal de Educação
Tecnológica Celso Suckow da Fonseca)
9:30 0501 MMEN83
Mechanical behavior of composite of polyurethane reinforced with cotton fiber and
alumina trihydrate, A. Silva, E. H. P. da Silva, D. Janes, S. M. Domiciano, R. R. C. da
Costa (Universidade Tecnológica Federal do Paraná)
9:50 0545 MMEN84 Bio-PCM thermophysical characterization through the T-history method, L. Lira, M.
M. Monteiro (Universidade de Brasília)
10:10 Coffee-break
TIME CODE Materials Characterization and Processing
10:40 1120 MMEN85
Environmental aging in polymeric composites using curauá fiber, R. Felipe, R. Felipe
(Instituto Federal de Educação Ciência e Tecnologia do Rio Grande do Norte), A.
Batista (Universidade Federal Rural do Semi-Árido), E. M. F. de Aquino
(Universidade Federal do Rio Grande do Norte)
11:00 0698 MMEN86
Study of fibers obtained from the vegetable specie montrichardia linifera (araceae) to
evaluation of their technological application, E. L. S. Amaral (Universidade Estácio de
Sá), D. Brabo (Universidade Estácio de Sá), J. Lopes (Universidade do Estado do
Pará )
11:20 1034 MMEN87
Mechanical performance of a novel jute fiber bio-composite used as a trunk tray
material, F. N. Q. dos Santos (Centro Federal de Educação Tecnológica de Minas
Gerais), R. Braga (Faculdade Pitágoras), H. Augusto, S. M. S. Pinheiro (Universidade
Federal de Minas Gerais)
11:40 0581 MMEN88
Assessment of mill scale formation in steel industries using thermogravimetric
analysis, L. M. R. N. da Costa, I. Ávila, J. Carvalho (Universidade Estadual Paulista),
G. L. A. A. Ferrufino (Instituto Nacional de Pesquisas Espaciais)
12:00 Lunch
TIME CODE Materials Characterization and Processing
13:30 0302 MMEN89 The influence of prior heat treatment on nitriding of AISI H13 steel, R. L. Villanova
(Universidade Tecnológica Federal do Paraná)
13:50 0704 MMEN90 Influence of CO2 addition in the shielding gas of inconel 625 weld overlays deposited
by GMAW, A. Tavares (Universidade Federal do Rio Grande - FURG)
14:10 0747 MMEN91
Development of an equipment to evaluate the susceptibility to hydrogen assisted
cracking, G. Martiniano, D. Souza, J. E. S. Leal, S. Franco (Universidade Federal de
Uberlândia)
14:30 0558 MMEN92 Relaxation stress in austenitic stainless steel ASTM F-1586, E. Silva, C. Campos
(Universidade CEUMA )
14:50 1035 MMEN93
Detection of ferrite phase transformation by induced magnetic field on a duplex
stainless steel, E. Silva (Instituto Federal de Educação, Ciência e Tecnologia da
Paraíba), A. Andrade (Universidade Federal da Paraíba), F. de Oliveira (Instituto
Federal de Educação, Ciência e Tecnologia da Paraíba), M. N. A. Lima (Universidade
Federal da Paraíba), J. Leite, J. Leite (Universidade Federal de Campina Grande), M.
M. R. da Silva (Universidade Federal da Paraíba)
15:10 1036 MMEN94
Detection of microstructure anisotropy using induced magnetic fields, E. Silva
(Instituto Federal de Educação, Ciência e Tecnologia da Paraíba), A. Andrade
(Universidade Federal da Paraíba), J. Leite, J. Leite (Universidade Federal de
Campina Grande), M. M. R. da Silva (Universidade Federal da Paraíba)
15:30 1256 MMEN95
Evaluation of chip-breakers manufactured by ultrashort laser pulses in cemented
carbide tools, A. G. Pereira, M. B. Carneiro (Escola de Engenharia de São Carlos), P.
A. Barbosa (Universidade Federal do Espírito Santo), R. Samad, N. Vieira, W. de
Rossi (Instituto de Pesquisas Energéticas e Nucleares)
62
ORAL SESSION WED / 6
MMEN2 - Materials and Manufacturing Engineering (AUD.4 - Carlos Costa – Bldg. 3 / Verde) TIME CODE Materials Characterization and Processing
8:30 Invited Optical metrology applied on the 4.0 industry – State of art and future applications
and development, V. Massaroti (VTECH- Brazil)
9:10 1279 MMEN96
Study of fatigue behavior in sandwich composite with fiber glass and epoxy resin as
core, J. Cheloni, M. E. Silveira, J. de Avila Jr, L. de S. Souto, J. N. Brito (Universidade
Federal de São João del Rei)
9:30 1283 MMEN97
Study of the mechanical performance of semi-ecological composites sisal / polyester
and curauá / polyester, J. Santos (Instituto Federal de Educação, Ciência e
Tecnologia do Ceará), R. C. S. Freire Jr (Universidade Federal do Rio Grande do
Norte), C. Cruz (Instituto Federal da Bahia)
9:50 2088 MMEN98
Study on the flexural-shear strength of hybrid composites reinforced sisal/cana-
brava, D. Bispo, G. de Jesus, M. Silva, R. Carvalho (Universidade Federal da Bahia),
A. C. R.l da Conceição (Instituto Federal da Bahia)
10:10 Coffee-break
TIME CODE Materials Characterization and Processing
10:40 1551 MMEN99
Viscoelastic properties of PVDF investigated by dynamic mechanical analysis, J. M. L.
dos Reis, I. Leite (Universidade Federal Fluminense), J. Sousa (CEFET-RJ), H. da C.
Mattos (Universidade Federal Fluminense)
11:00 1350 MMEN100
Analysis of the thermo-physical characteristics of Al-Fe-Zr-(1,8; 5,0)wt%Mg alloys
solidified in horizontal unidirectional mold, Y. Campo (Universidade Federal de
Santa Maria), M. V. Wanderley, R. A. da Silva, M. Lobato, J. M. do V. Quaresma
(Universidade Federal do Pará)
11:20 1389 MMEN101 Rapid Solidification and Characterization of Ni-Nb alloys, C. R. M. Afonso
(Universidade Federal de São Carlos)
11:40 1667 MMEN102
Comparative study of physical and simulated tensile tests of steels SA-516 Gr.70, SA-
240 TP.316L and SA-516 Gr.70 + SA-240 TP.316L cladded by rolling process, B.
Nascimento, J. R. G. Carneiro (Pontifícia Universidade Católica de Minas Gerais)
12:00 Lunch
TIME CODE Materials Characterization and Processing
13:30 1711 MMEN103
Study of AISI 4340 steel used in Petroleum Extraction Pipes, Y. Costa (Centro
Universitário UDF), L. L. D. Morales (Universidade de Brasília), H. de A. Pegado
(Centro Universitário UDF)
13:50 1805 MMEN104
Mathematical modeling of sensors elements using graphite, R. Gabbi, L. A. Rasia, A.
C. Valdiero (Universidade Regional do Noroeste do Estado do Rio Grande do Sul),
M. T. T. Gabbi (Universidade Federal de Santa Maria)
14:10 1382 MMEN105
Study of chromium oxide coatings by RF magnetron sputtering in metal dusting
conditions, D. V. M. Maximo (Instituto Tecnologico y de Estudios Superiores de
Monterrey ), O. Salas (Tecnologico de Monterrey-CEM)
14:30 1901 MMEN106
Transparent and conductive films of reduced graphene oxide: spray deposition and
characterization, A. M. Lima, G. Faria, R. Medeiro, L. Cruz, W. A. Pinheiro (Instituto
Militar de Engenharia)
14:50 1945 MMEN107
The freeze casting method as a production alternative for ceramic capillary
evaporators, F. M. Baumgratz, M. V. Oro, E. Bazzo (Universidade Federal de Santa
Catarina)
15:10 1949 MMEN108
Characterization and study of stability in crude oil of the ceramic composite
alumina-zirconia-lantania produced by solid state sintering at different
temperatures, B. Constantino, L. Albuquerque, R. A. S. Ferreira, Y. P. Yadava
(Universidade Federal de Pernambuco)
15:30 2046 MMEN109
Development and manufacture of inert coating to crude oil based on yttria stabilized
zirconia-titania ceramics to manufacture system to store and transport petroleum,
A. Sousa (Instituto Federal de Pernambuco), R. Domingues, Y. P. Yadava, R. A. S.
Ferreira (Universidade Federal de Pernambuco)
63
ORAL SESSION THU / 7
MMEN2 - Materials and Manufacturing Engineering (AUD.4 - Carlos Costa - Bldg. 3 / Verde) TIME CODE Materials Characterization and Processing
8:30 2031 MMEN110 The influence of the as-cast microstructure of Al-Mg-Si alloy on the corrosion
behavior, L. Pessoa, D. Rosa (Universidade de Brasília)
8:50 2080 MMEN111
Ball on plane rolling tests to evaluate gears contact fatigue, P. D. N. Tayer, N.
Fukumasu, R. Stoeterau, I. Machado (Universidade de São Paulo), G. A. A.
Machado (Fiat Chrysler)
9:10 2091 MMEN112 Study on friction torque models in grease lubricated bearings, B. K. Borges, T.
Cousseau (Universidade Tecnológica Federal do Paraná)
9:30 2110 MMEN113
Non-isothermal kinetics of the thermal degradation of hemicellulose extracted from
curauá fibers by alkali treatment, V. D. Libera Jr., M. R. de Oliveira, S. Luz
(Universidade de Brasília)
9:50 2129 MMEN114 A new computational method for determining the parameters of Johnson-Cook
model, C. A. A. Viana, M. Miguel (Universidade Estadual Paulista)
10:10 Coffee-break
TIME CODE Materials Characterization and Processing
10:40 2719 MMEN115
Production of AlN thin films via deep oscillation magnetron sputtering for
biosensors, O. Salas , D. V. M. Maximo (Tecnológico de Monterrey-CEM), J. Lin
(SouthWest Research Institute)
11:00 2180 MMEN116
Mechanical and flammability properties of green polyurethane foam with alumina
trihydrate as flame retardant, A. Silva, E. H. P. da Silva, D. Janes, R. R. C. da Costa,
G. G. C. Silva (Universidade Tecnológica Federal do Paraná)
11:20 2245 MMEN117
Inconel® 625 wire laser cladding: process parametrization to produce high quality
coatings for metalworking industry, V. K. Fernandes, A. Lauffs, A. de S. P. Pereira, J.
Gutjahr, M. Pereira, W. L. Weingaertner (Universidade Federal de Santa Catarina),
E. W. Teichmann (Instituto Federal de Santa Catarina)
11:40 2336 MMEN118
Evaluation of microhardness profile of a joint welded with dissimilar steels, F.
Cavalcante (Universidade Federal Rural do Semi-Árido), J. G. de Almeida, S. M. A.
Duart, E. C. da Costa, S. J. G. de Lima (Universidade Federal da Paraíba)
12:00 Lunch
TIME CODE Materials Characterization and Processing
13:30 2364 MMEN119
A study on the influence of ecap die design and backpressure on the deformation
and mechanical properties of a SAE 1045 steel, R. S. Namur, M. T. Izumi, M.
Azevedo, M. F. Hupalo, O. Cintho (Universidade Estadual de Ponta Grossa), K.
Zilnyk (Instituto Federal de São Paulo)
13:50 2254 MMEN120
Yb-fiber powder laser cladding of Inconel 625, V. K. Fernandes, A. de S. P. Pereira, J.
Gutjahr, M. C. Fredel, M. Pereira, W. L. Weingaertner, A. Laschkow (Universidade
Federal de Santa Catarina)
14:10 2407 MMEN121
Plasma nitriding of Fe-Al ferritic alloys at 500 and 550 ºC, F. I. Zanetti, L. L. Santos, I.
Zanella, G. S. Kobayashi, S. Brunatto, R. P. Cardoso (Universidade Federal do
Paraná)
14:30 2432 MMEN122 Thermal evaluation of seats and backrest with natural fibers, D. Weiss, M. L.
Okimoto, G. Oliveira (Universidade Federal do Paraná)
14:50 2599 MMEN123
Production and study of stability in crude oil of Al2O3- ZrO2 composite ceramic
reinforced with rare earth oxide (CeO2) for use as metal matrices coating, Y. P.
Yadava, B. Constantino, R. A. S. Ferreira, M. B. Padilha (Universidade Federal de
Pernambuco), R. Cordeiro (Instituto Federal de Pernambuco)
15:10 2684 MMEN124
A comparative study of hardfacing techniques: microstructure and wear
performance of NiCrSiBC coatings processed by arc and laser, L. J. da Silva
(Universidade Federal de Uberlândia), C. Scheuer (Universidade Federal de Santa
Maria), A. S. D'Oliveira (Universidade Federal do Paraná)
15:30 2687 MMEN125
First results of the cavitation erosion behavior for low-temperature plasma
carburized martensitic stainless steel, F. Severo, R. P. Cardoso, S. Brunatto
(Universidade Federal do Paraná), C. Scheuer (Universidade Federal de Santa
Maria)
64
ORAL SESSION FRI / 8
MMEN2 - Materials and Manufacturing Engineering (AUD.4 - Carlos Costa - Bldg. 3 / Verde) TIME CODE Materials Characterization and Processing
8:30 0885 MMEN126
Dog wool: study of the physical and thermal properties, F. C. da Silva (Universidade
Federal de Santa Catarina), R. Ladchumananandasivam, J. U. de Lima Mendes
(Universidade Federal do Rio Grande do Norte)
8:50 1174 MMEN127 Effect of Ni content on the hardenability of a bainitic steel for plastics processing, J.
B. Bacalhau, C. R. M. Afonso (Universidade Federal de São Carlos)
9:10 2774 MMEN128 Evaluation of the properties of the epoxy resin by adding layered double hidroxides,
A. W. X. Jargenboski, G. B. Dutra (Universidade Federal de Santa Catarina)
9:30 2892 MMEN129
Microstructural and mechanical characterization of Hardox 450 steel, B. de Oliveira,
D. Zeferino, L. C. Vieira, M. Costa, C. J. de Oliveira (Pontifícia Universidade Católica
de Minas Gerais), M. Câmara (Universidade Federal de Minas Gerais), P. H. A.
Santos, S. S. F. de Dafé (Pontifícia Universidade Católica de Minas Gerais)
9:50 2920 MMEN130 CNT and go epoxy nanocomposites - an experimental comparison of mechanical
properties, M. B. Moraes, G. Thim (Comando da Aeronáutica)
10:10 Coffee-break
65
ORAL SESSION MON / 4
MECH1 - Mechatronics and Automation (Room 3 – Bldg. 4 / Laranja) TIME CODE Control Systems
8:30 0196 MECH1 Modeling and control of tandem cold rolling mills, A. Leoni, J. A. Castro
(Universidade Federal Fluminense), P. Alves (Instituto Federal do Rio de Janeiro)
8:50 0374 MECH2 Quadrotor aerial vehicles under actuator failures - an adaptive approach, M. K. de C.
Cunha, D. A. dos Santos, E. Hemerly (Instituto Tecnológico de Aeronáutica)
9:10 0469 MECH3
Open loop control system and tools for data acquisition and feature extraction of the
weld bead geometry in gmaw process, G. A. Bestard, R. Thompson, S. C. A. Alfaro
(Universidade de Brasília)
9:30 0506 MECH4
Neuro-fuzzy control and differential evolution in the compensation of the actuators’
dead zone of a two-wheeled vehicle, B. L. Pereira, L. Sanches, J. J. P. Z. de S. Tavares
(Universidade Federal de Uberlândia)
9:50 0727 MECH5 Evolution of an experiment to assess pilot behaviour in flight simulators, D. H. Arjoni,
E. Villani, A. D. Kraemer (Instituto Tecnológico de Aeronáutica)
10:10 Coffee-break
TIME CODE Control Systems
10:40 0822 MECH6
Contributing to the implementation of a vision-based control strategy for a planar
parallel manipulator, F. T. Colombo, J. V. de C. Fontes, M. M. da Silva (Universidade
de São Paulo)
11:00 1075 MECH7
Development of transfer function library from Arduino® light sensor system using
Scilab Xcos simulation, C. Vaz, I. L. da Silva, A. R. B. Baldo, L. A. D. Koslowski
(Universidade do Estado de Santa Catarina)
11:20 1104 MECH8
Embedded control strategy for an active suspension using a low-cost hardware in the
loop platform, A. B. C. de Farias, R. S. Rodrigues, A. Pinto, R. Lopes, S. Avila
(Universidade de Brasília)
11:40 1114 MECH9 Control system design for an exoskeleton of the right lower limb, M. Koendjbiharie,
D. Munoz, C. H. Llanos (Universidade de Brasília)
12:00 Lunch
TIME CODE Control Systems
13:30 1176 MECH10
Design of an embedded system for water temperature control in a solar assisted heat
pump, T. de F. Paulino, E. Fonseca, A. Maia, L. Machado, R. Koury (Universidade
Federal de Minas Gerais)
13:50 1210 MECH11
H∞ and model reference adaptive control of a series elastic actuator for robotic
rehabilitation: preliminary results, J. Campo, J. C. P. Ibarra, F. M. E. Ortega, A. L. J.
Alarcon, M. Terra, A. Siqueira (Universidade de São Paulo)
14:10 1221 MECH12
Automation learning environment based on fuzzy systems, S. A. Ribeiro, J. Medeiros,
R. Pinho (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), N.
Rodrigues, L. Bionde (Universidade Estadual do Rio de Janeiro)
14:30 1528 MECH13
Control of a brushless DC motor by a fractional order PID controller with a radial
basis function neural network tune method, S. N. S. Nunes, F. Lopes, A. Maia
(Universidade Federal de Minas Gerais)
14:50 1764 MECH14 UAV control loops design tested in an hil plataform, M. H. dos Santos, N. M. F.
Oliveira, B. Maciel (Instituto Tecnológico de Aeronáutica)
15:10 1772 MECH15
Support vector regression based nonlinear model predictive control on FPGA, R.
Sampaio (Universidade de Brasília), C. E. S. Santos (Instituto Federal de Educação,
Ciência e Tecnologia de Tocantins), C. H. Llanos, R. Jacobi (Universidade de
Brasília), L. Coelho (Pontifícia Universidade Católica do Paraná), H. V. H. Ayala (IBM
Research)
15:30 -- -- --
66
ORAL SESSION TUE / 5
MECH1 - Mechatronics and Automation (Room 3 - Bldg. 3 / Laranja) TIME CODE Control Systems
8:30 1785 MECH16
Experimental results on pose regulation, tracking and formation control of
nonholonomic robots using potential functions, J. Gouvêa, T. H. da Silva, A. Zachi
(Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), F. Lizarralde
(Universidade Federal do Rio de Janeiro)
8:50 1827 MECH17
Actuation and control of electric valves for a magnetic refrigerator, G. Hoffmann, S.
L. Dutra, P. Cardoso, A. Nakashima, J. Lozano, J. Barbosa (Universidade Federal de
Santa Catarina)
9:10 1993 MECH18
Multipoint ethanol injection system for diesel engines, A. R. A. Achy, W. Souza, J. A.
dos S. Silva, G. G. Demetino (Universidade Federal da Bahia), L. C. Soares Jr., V.
Ferreira (Universidade Federal do Recôncavo da Bahia), I. M. Pepe (Universidade
Federal da Bahia)
9:30 2320 MECH19
Development of a reduced scale plant for continuous industrial process simulation
and fluid level control in communicating vessels, M. V. Lima, C. Matos, L. Teixeira, M.
Brito, E. G. Teodozio (Universidade Federal da Bahia)
9:50 2411 MECH20
A low-cost automatic control system for HDPE pipes weldment, I. Souza, C. Carvalho,
W. Andrade, F. L. e Silva (Centro Federal de Educação Tecnológica Celso Suckow
da Fonseca)
10:10 Coffee-break
TIME CODE Control Systems
10:40 2527 MECH21
Data analysis about flight dynamics: a review to apply machine learning techniques
in unmanned aerial vehicles, G. P. Oliveira, R. M. Finzi Neto, J. M. Vedovoto, L.
Sanches (Universidade Federal de Uberlândia)
11:00 2528 MECH22
Pod device development for small scale propeller model tests, J. M. P. de Souza, J. L.
D. Dantas, F. S. de Castro, A. M. Kogishi (Instituto de Pesquisas Tecnológicas do
Estado de São Paulo)
11:20 2689 MECH23 Motor synchronization using real time PROFINET IO class 1, P. Mattos, N. Mastelari,
F. Lara (Universidade Estadual de Campinas)
11:40 2706 MECH24
An experimental evaluation of the parallella platform using model-based predictive
control as a case study, M. Soudre, C. H. Llanos, Renato Sampaio (Universidade de
Brasília)
12:00 2868 MECH25
Project and simulation of PID fuzzy controller for a hydraulic proportional system, J.
C. A. Carvalho, G. C. da Silva Neto, J. M. Louzada Neto, P. R. O. Martins
(Universidade Federal do Amazonas)
12:20 Lunch
TIME CODE Computer Vision
13:30 1006 MECH26 Comparison of filtering methods for stereo visual-inertial navigation of multirotor
aerial vehicles, B. A. Asfora, D. A. dos Santos (Instituto Tecnológico de Aeronáutica)
13:50 1046 MECH27
Analysis and design of test bench for a hexapod robot, N. S. Sánchez, H. D. Torres, B.
F. Contreras, N. S. Coy, R. D. H. Beleño, M. A. J. Gómez, R. J.Moreno (Universidad
Piloto de Colombia)
14:10 1193 MECH28
Performance evaluation of a multiscale descriptor to detect feature points on object
borders in range images, J. M. S. T. da Motta, G. I. Pizo, J. M. S. T. da Motta
(Universidade de Brasília)
14:30 1676 MECH29
Density based fish counting with computer vision for aquarium and box storage in
noisy environments, T. H. G. Lobato, G. da S. V. de Melo (Universidade Federal do
Pará)
14:50 2000 MECH30
Computer vision system for the evaluation of laser marking processing, M. K. Dutra,
M. Stivanello (Instituto Federal de Santa Catarina), M. Pereira (Universidade Federal
de Santa Catarina)
15:10 2623 MECH31
Visual servoing stabilization of a ball and plate mechanism by using an enhanced
disturbance rejection control method, A. Zachi, S. R. D. Riveros, P. P. P. Lima, J.
Gouvêa (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), A.
Leite (Pontifícia Universidade Católica)
15:30 -- -- --
67
ORAL SESSION WED / 6
MECH1 - Mechatronics and Automation (Room 3 – Bldg. 3 / Laranja) TIME CODE Robotics, Sensors & Actuators
8:30 0240 MECH32
Kinect and wearable robots, R. S. Gonçalves, I. Rodrigues (Universidade Federal de
Uberlândia), H. Krebs (Massachusetts Institute of Technology, USA), R. S. Gonçalves
(Universidade Federal de Uberlândia)
8:50 0316 MECH33 Time of flight ultrasound indoor navigation system, E. Reis, C. L. Nascimento Jr., N.
M. F. Oliveira (Instituto Tecnológico de Aeronáutica)
9:10 0474 MECH34
Offline viewpoint planning for underwater inspection using octomap, B. L. Floriani, L.
Weihmann, H. Simas (Universidade Federal de Santa Catarina), N. Palomeras, P.
Ridao (University Of Girona)
9:30 1068 MECH35 Modelling and control of a macro-micro system using interaction controllers, G. J. G.
Lahr, L. Costa, T. Boaventura, G. Caurin (Universidade de São Paulo)
9:50 0414 MECH36
Stepped sine and multisine signal excitation for identification in a small amb test rig,
D. A. G. Diaz, F. A. de N. C. Pinto, T. Ritto, D. J. G. Maldonado (Universidade Federal
do Rio de Janeiro)
10:10 Coffee-break
TIME CODE Robotics, Sensors & Actuators
10:40 0317 MECH37 Navigation routines using only integer calculations for minimum code footprint, E.
Reis (Instituto Tecnológico de Aeronáutica)
11:00 0539 MECH38
Isotropic wrench capability maps and isotropic velocity capability maps for a 3RRR
planar parallel manipulator, L. M. Rincon, D. Ponce, J. Frantz, D. Martins, H. Simas
(Universidade Federal de Santa Catarina)
11:20 0791 MECH39 Development of a new modular variable stiffness actuator, F. da S. Rosa, E. H.
Murai, J. V. F. Brito, D. Martins, H. Simas (Universidade Federal de Santa Catarina)
11:40 0869 MECH40
Development of a didactic robotic cell for handling by the arduino application, F.
Silva, F. Moreira, A. C. Ferraz, W. Lopes, R. Fornitano, A. Gonçalves (Centro
Universitário Salesiano de São Paulo)
12:00 Lunch
TIME CODE Robotics, Sensors & Actuators
13:30 0890 MECH41 Selecting kinematic structures using the actuated degree-of-control, E. H. Murai, R.
Simoni, D. Martins (Universidade Federal de Santa Catarina)
13:50 0941 MECH42 Backstepping and PIV control applied to magnetic levitation, W. Souza, M. E. M.
Meza, G. R. R. da Silva, E. Rafikova (Universidade Federal do ABC)
14:10 0994 MECH43
Development of a novel perpendicularity correction method for robotic manipulators
applied to aerospace domain, W. Oliveira, T. N. Cunha, G. B. Rodamilans, E. Villani,
L. G. Trabasso (Instituto Tecnológico de Aeronáutica)
14:30 0318 MECH44 Self compensating capacitive fluid level sensor, E. Reis (Instituto Tecnilógico de
Aeronáutica)
14:50 1029 MECH45
An efficient selective modal H-infinity control for mechanical structures, H. Genari
(Universidade Tecnológica Federal do Paraná), E. Nóbrega, P. S. Meirelles
(Universidade Estadual de Campinas)
15:10 1045 MECH46
Design and simulation of a bio-inspired leptynia hispanica hexapod robot, N. S.
Sánchez, B. F. Contreras, N. S. Coy, H. D. Torres, R. D. H. Beleño, M. A. J. Gómez
(Universidad Piloto de Colombia)
15:30 1057 MECH47 Dynamics of torsional slender systems under action of a ℒ1 adaptive controller, G.
Sampaio, H. I. Weber (Pontifícia Universidade Católica do Rio de Janeiro)
68
ORAL SESSION THU / 7
MECH1 - Mechatronics and Automation (Room 3 - BL. Laranja) TIME CODE Robotics, Sensors & Actuators
8:30 1081 MECH48
Implementing a ICP based Controller for Skippy, A. Bento Filho (Universidade
Federal do Espírito Santo), G. Wiedebach, J. Pratt (Florida Institute For Human &
Machine Cognition, USA)
8:50 1195 MECH49 Single joint-link experimental calibration for the NAO humanoid robot, J. M. S. T. da
Motta, H. C. Demolinari (Universidade de Brasília)
9:10 1285 MECH50 Algebraic tension conditions in cable-driven mechanisms, T. Muraro, D. Martins, L.
Sacht (Universidade Federal de Santa Catarina)
9:30 1370 MECH51
Model predictive control for path tracking of a UAV subject to aerodynamic
disturbances, G. M. V. Ladeira, G. V. Lima, R. Souza (Universidade Federal de
Uberlândia)
9:50 1647 MECH52
Robotic platform with passive suspension to be applied on soybean crops: initial
results, V. Higuti, A. E. B. Velasquez, M. V. Gasparino, G. C. de Oliveira, C. I. A.
Carrasco, J. C. Risardi, D. Magalhães, M. Becker (Universidade de São Paulo), D. M.
B. P. Milori (Embrapa Instrumentação)
10:10 Coffee-break
TIME CODE Robotics, Sensors & Actuators
10:40 1655 MECH53
Design, analysis and software correction for the performance of a scara robot, W. de
B. Vidal Filho, O. P. M. de Mello, E. Rocha (Universidade de Brasília), L. F. C. e S.
Vidal (Universidade Federal de Pernambuco)
11:00 1719 MECH54 Submersible drone: localization of missing people’s victims of drowning, F. S.
Aureliano, A. Lopes (Centro Universitário do Sul de Minas)
11:20 1720 MECH55
Development of an algorithm to support visually impaired people using ultrasonic
sensors, R. Santos, J. Ferreira, T. H. G. Lobato, G. da S. V. de Melo (Universidade
Federal do Pará)
11:40 1765 MECH56
Development of a remotely operated vehicle capable of movement on marsh terrains
and rubble, D. H. do N. Viola, M. F. de S. Moreira, G. Taurinho, L. Faria, G. H. Correa
(Centro Universitário Newton Paiva)
12:00 Lunch
TIME CODE Robotics, Sensors & Actuators
13:30 1881 MECH57 Control of a tendon-driven robotic hand from surface electromyographic signals, C.
Malqui, M. A. Meggiolaro (Pontifícia Universidade Católica do Rio de Janeiro)
13:50 2116 MECH58
Simulation and experimental validation of the dynamic modeling of a 3-RPR
mechanism using power flow approach, A. N. de Albuquerque, M. Speranza Neto,
M. A. Meggiolaro (Pontifícia Universidade Católica do Rio de Janeiro)
14:10 2186 MECH59
Proposal of activation and position control of the prototype of an active orthosis for
lower limb, E. Caetano, D. R. S. da S. Araújo, L. L. B. Bandeira, A. C. B. Zancanella, C.
Souza (Instituto Federal de Educação Ciência e Tecnologia do Espírito Santo)
14:30 2255 MECH60
Development of a low cost automated valve for fluid level control in communicating
vessels, M. V. Lima, C. Matos, L. Teixeira, M. Brito, I. M. Pepe (Universidade Federal
da Bahia)
14:50 2302 MECH61
Economic viability in the automation of wheel chair conventional: engineering
applied to social development, D. L. U. de Andrade, L. Veraldo Jr., R. E. S. Cabette
(Centro Universitário Salesiano de São Paulo)
15:10 2327 MECH62 Simulation and implementation of impedance control in robotic hand, S. A. P.
Mendez, C. H Llanos, Daniel Munoz (Universidade de Brasília)
15:30 2215 MECH63
Development of a climbing robot with magnetic wheels, O. S. de Lima Jr, F. Lopes e
Silva, C. Carvalho, M. B. Michels, L. S. C. Raptopoulos (Centro Federal de Educação
Tecnológica Celso Suckow da Fonseca)
69
ORAL SESSION FRI / 8
MECH1 - Mechatronics and Automation (Room 3 - Bldg. 3 / Laranja) TIME CODE Robotics, Sensors & Actuators
8:30 2391 MECH64
Development and characterization of a 2D phased array ultrasonic transducer for
underwater applications, E. P. Rodrigues, T. F. de Oliveira, F. Buiochi (Universidade
de São Paulo)
8:50 2419 MECH65
Robotic hand controlled by electromyographic signals, P. Skrdlik, R. Figueiredo, C.
Carvalho, F. Lopes e Silva, L. S. C. Raptopoulos, W. Andrade (Centro Federal de
Educação Tecnológica Celso Suckow da Fonseca)
9:10 2571 MECH66
Design and construction of dynamic simulator for testing the child’s restraint
systems, V. C. de Souza, A. C. F. de Arruda, A. F. P. Tavares (Universidade Estadual
de Campinas)
9:30 2698 MECH67
Experimental measurement of the electro mechanical parameters of an energy
harvesting system using cantilever beam, R. de M. Moraes, N. Mastelari
(Universidade Estadual de Campinas)
9:50 2773 MECH68
Angular control of a rotating platform using two reaction wheels, M. F. P. A. dos
Santos, B. Santos, R. Bachega, A. Campo (Instituto Federal de Educação, Ciência e
Tecnologia de São Paulo)
10:10 Coffee-break
TIME CODE Robotics, Sensors & Actuators; Fluid Power Systems
10:40 0628 MECH69 Modelling a subsea hydraulic actuator for ultra-deep water, R. M. Goularte, V. J. De
Negri (Universidade Federal de Santa Catarina), A. Orth (Bosch Rexroth AG)
11:00 0761 MECH70 Modelling the hydraulic circuit of an automatic transmission, T. Macedo, V. J. De
Negri (Universidade Federal de Santa Catarina), L. Serfert Jr. (Ford Motor Company)
11:20 1787 MECH71
Hydraulic-pneumatic regenerative system for hybridization of commercial urban
vehicles, R. R. da S. Bravo (Instituto Federal de Santa Catarina), A. A. M. Oliveira, A.
T. C. Gama, V. J. De Negri (Universidade Federal de Santa Catarina)
11:40 1423 MECH72 Pneumatic muscle with smart braid used in orthosis, R. Oliveira (Centro Universitário
de Brasília), N. Souza, D. M. Viana (Universidade de Brasília)
12:00 Lunch
70
ORASL SESSION THU / 7
MECH2 - Mechatronics and Automation (Room 3 - Bldg. 3 / Laranja) TIME CODE Artificial Intelligent Applications, Metrology
13:30 0296 MECH73
Simultaneous localization and mapping of a mobile robot using a Kinect v2 sensor in
indoor environments, J. C. V. Soares, M. A. Meggiolaro (Pontifícia Universidade
Católica do Rio de Janeiro)
13:50 0304 MECH74
Use of artificial neural networks for identification of the electric submersible pump
performance working with a viscous fluid, L. F. B. Salamanca, A. Serpa, N. Sassim, J.
L. Biazussi, W. M. Verde (Universidade Estadual de Campinas)
14:10 0924 MECH75 Analysis of MLP Artificial Neural Network architecture for E423 airfoil, B. Diniz, T.
Medeiros, L. L. Nascimento (Universidade Federal da Bahia)
14:30 0355 MECH76 Screw kinematic model for robot calibration with pc-robot communication overview,
L. Kato, T. Pinto, H. Simas, D. Martins (Universidade Federal de Santa Catarina)
14:50 0950 MECH77 Analysis of Fit System in the programming environment MATLAB, F. M. Farias Filho,
R. Fonseca, C. da R. Souto (Universidade Federal da Paraíba)
15:10 1657 MECH78
Closed loop integration model for dimensional and geometric inspection of prismatic
parts based on the STEP-NC Standard, C. I. R. Jaimes, R. Bonnard (Universidade de
Brasília), J. C. E. Ferreira (Universidade Federal de Santa Catarina), A. Alvares
(Universidade de Brasília)
15:30 1729 MECH79 GD&T techniques application and analysis using MCOSMOS, J. Quirino, J. Silva, J. C.
de Lima Jr, M. Fideles (Universidade Federal da Paraíba)
71
ORAL SESSION MON / 4
NMMS - Nano and Microfluidic and Micro-Systems (Room 4 - Bldg. 3 / Laranja) TIME CODE Heat and Mass Transfer in Micro and Nano scales
8:30 Invited
Experimental and inverse analysis of micro-reactors for biodiesel synthesis integrated
with micro-heat exchangers for reuse of waste heat, C. P. N. Cotta (Universidade
Federal do Rio de Janeiro)
9:10 0536 NMMS1 Analysis of the thermal performance of a brass micro heat pipe array, I. L. S. S. Júnior
(Escola de Engenharia de São Carlos), C. Tibiriçá (Universidade de São Paulo)
9:30 0752 NMMS2 Experimental and numerical study of a micro heat exchanger, B. Gomes, J. Copetti
(Universidade do Vale do Rio dos Sinos)
9:50 1672 NMMS3
Analysis of the refrigeration capacity of silver nanofluids, R. Fragelli, L. Sanchez, V. L.
Scalon, R. Ingraci, F. Pontes (Universidade Estadual Paulista - Faculdade de
Engenharia de Bauru)
10:10 Coffee-break
TIME CODE MEMS, NEMS and NOEMS; Micro and Nanofabrication; Micro and Nanofluidics
10:40 2141 NMMS4
Experimental evaluation of thermal instabilities during flow boiling of Di-water in
microchannels having their surfaces covered with nanoparticles, T. A. Moreira, F. J.
do Nascimento, G. Ribatski (Universidade de São Paulo)
11:00 1859 NMMS5
A study of attitude and heading determination through an EKF-based sensor fusion
for inertial measurement units (IMUs), F. Barrera, R. Sampaio, D. Munoz, C. H.
Llanos (Universidade de Brasília)
11:20 2075 NMMS6
Incorporation of carbon nanotubes in stainless steel 304L via mechanical alloying, P.
Baia, C. Loayza, D. C. S. Cardoso, D. J. A. Borges, P. Assunção, E. Braga, V.
Ferreira(Universidade Federal do Pará)
11:40 0143 NMMS7
Transport properties of nanolubricants based in polyolester refrigeration oil and
diamond nanoparticles, D. Marcucci, L. Oliveira, E. Bandarra Filho, V. Panato
(Universidade Federal de Uberlândia)
12:00 0826 NMMS8
Numerical simulation of nanofluids working as secondary fluid in refrigeration
system - a comparison using thermophysical properties from models and measured
experimentally, F. L. Renault, A. O. C. Gómez, E. Bandarra Filho (Universidade
Federal de Uberlândia)
12:20 Lunch
72
ORAL SESSION TUE / 5
NMMS - Nano and Microfluidic and Micro-Systems (Room 4 - Bldg. 3 / Laranja) TIME CODE Micro and Nanofluidics
8:30 0989 NMMS9
Three-dimensional visualization of oil displacement by flexible microcapsules suspensions
in porous media, J. R. Vimieiro Jr, M. C., D. F. do Nascimento (Pontifícia Universidade
Católica do Rio de Janeiro)
8:50 1024 NMMS10
Tailoring flexible microcapsules for mobility control, D. F. do Nascimento, J. A. A.
Benavides, A. M., M. Moura, M. Carvalho (Pontifícia Universidade Católica do Rio de
Janeiro)
9:10 1027 NMMS11
Effect of wettability in immiscible displacement of oil on microfluidic porous media, J. A. A.
Benavides, N. Lima, A. Quevedo, M. Carvalho (Pontifícia Universidade Católica do Rio de
Janeiro)
9:30 1426 NMMS12 Photothermal conversion using graphene/water nanofluids, C. Beicker, E. Bandarra Filho
(Universidade Federal de Uberlândia)
9:50 1613 NMMS13 On the crawling wave motion of nematodes under the presence of a magnetic field, S.
Malvar, F. R. Cunha, B. Carmo (Universidade de São Paulo)
10:10 Coffee-break
TIME CODE Micro and Nanofluidics
10:40 1909 NMMS14
Experimental analysis of nucleate boiling on nanostructured surfaces under confined
conditions, J. M. Nunes, L. Manetti, E. M. Cardoso (Universidade Estadual Paulista Julio de
Mesquita Filho)
11:00 2161 NMMS15
Vortex shedding computational analysis for a pin fin confined in a microchannel, P. R.
d'Egmont, V. Z. Martins, C. P. N. Cotta, F. Duda, R. M. Cotta (Universidade Federal do Rio
de Janeiro)
11:20 2726 NMMS16 Visualization in micromodels of oil displacement by o/w emulsions, G. B. de O. Cruz, J. A.
A. Benavides, M. Carvalho (Pontifícia Universidade Católica do Rio de Janeiro)
11:40 2787 NMMS17
Experimental investigation of thermal conductivity and viscosity of insulating oil based
diamond-nickel hybrid nanofluids, L. Oliveira, D. F. M. Pico, E. P. Bandarra Filho
(Universidade Federal de Uberlândia)
12:00 5898 NMMS18
Evaluation of surface roughness and nanofluid concentration on the surface wettability
and the wall-temperature distributions, A. Cunha (Universidade Estadual Paulista Julio de
Mesquita Filho), I. Kiyomura (UNESP - Campus de Ilha Solteira), E. M. Cardoso
(Universidade Estadual Paulista Julio de Mesquita Filho)
12:20 Lunch
73
ORAL SESSION MON / 4
ICONNE - Non-linear Phenomena (Room 9 - Bldg. 3 / Laranja) TIME CODE Analytical methods; Experimental devices
8:30 0137 ICONNE1
The influence of the nonlinear interaction between flexural and sway-buckling on the
dynamics of an axially loaded column, J. de M. P. Raimundo, P. B. Gonçalves
(Pontifícia Universidade Católica do Rio de Janeiro), Diego Orlando, (Universidade
Estadual do Rio de Janeiro)
8:50 0284 ICONNE2
Global dynamic analysis of a barge wind turbine using the nonlinear normal modes,
E. Gavassoni, P. G. Zwierzikowski (Universidade Federal do Paraná), P. B. Gonçalves
(Pontifícia Universidade Católica do Rio de Janeiro)
9:10 0125 ICONNE3
Time-varying nonlinear dynamical system analog computing co-simulation, A.
Bueno, R. Machado, P. Serni, A. Bueno (Universidade Estadual Paulista), J. M.
Balthazar (Instituto Tecnológico de Aeronáutica)
9:30 0156 ICONNE4
On simulations and an implementation of chaotic and hyperchaotic motions of
Lorenz models, R. Resende (Universidade Estadual Paulista), J. M. Balthazar
(Instituto Tecnológico de Aeronáutica), A. M. Tusset (Universidade Tecnológica
Federal do Paraná), A. Bueno, P. Serni (Universidade Estadual Paulista)
9:50 0201 ICONNE5
On nonlinear wind tunnel aeroelastic tests and application of 0-1 test for chaos, M.
Westin, R. G. A. Da Silva, A. Nabarrete, J. M. Balthazar (Instituto Tecnológico de
Aeronáutica), A. M. Tusset (Universidade Tecnológica Federal do Paraná), G. M. V.
Ladeira (Universidade Federal de Uberlândia)
10:10 Coffee-break
TIME CODE Control Systems
10:40 0477 ICONNE6 Experimental characterization of the nonlinear characteristics of friction in
pneumatic actuators, R. O. Felix, M. Silveira (Universidade Estadual Paulista)
11:00 0971 ICONNE7
Experimental study of a hydraulic engine mount with emphasis on decoupler
characteristics, A. M. Tusset, B. Marin (Universidade Tecnológica Federal do
Paraná), F. C. Janzen (Universidade Estadual Paulista), J. M. Balthazar (Instituto
Tecnológico de Aeronáutica), E. M. de O. Lopes, C. A. Bavastri (Universidade
Federal do Paraná)
11:20 1041 ICONNE8 Attitude control of a pendulum using two reaction wheels, J. Trentin, T. Cenale, S.
da Silva, J. Ribeiro (Universidade Estadual Paulista)
11:40 1628 ICONNE9 Robust control with velocity feedback of a control moment gyroscope, D. Colón, B. A.
Angélico (Universidade de São Paulo)
12:00 Lunch
TIME CODE Macro, micro and nano scales; Nonlinear methods
13:30 0609 ICONNE10
A note on control in micro eletromachanical systems with hysteretic damping, D.
Bassinello (Instituto Federal do Paraná), A. M. Tusset, R. T. Rocha (Universidade
Tecnológica Federal do Paraná), J. Lima (Universidade Estadual Paulista), J. M.
Balthazar (Instituto Tecnológico de Aeronáutica)
13:50 0150 ICONNE11
Stochastic analysis of 1-DOF vehicle suspension system employing asymmetrical
damping, J. C. M. Fernandes, M. Silveira (Universidade Estadual Paulista), J. M.
Balthazar (Instituto Tecnológico de Aeronáutica)
14:10 0223 ICONNE12 Three-dimensional static behavior of risers submitted to traction and torsional
loads at the top, S. Granados, J. Avila (Universidade Federal do ABC)
14:30 0243 ICONNE13
Determination of an artificial base accelerogram compatible with a national code for
seismic analysis of a shear building model, R. Brito (Universidade de São Paulo), R.
Brasil (Universidade Federal do ABC)
14:50 0460 ICONNE14
Revisiting nonlinear dynamic behavior of morphing wings with spanwise telescopic
composite structure, H. L. Lebkuchen, A. Nabarrete, J. M. Balthazar, R. G. A. da Silva
(Instituto Tecnológico de Aeronáutica)
15:10 1061 ICONNE15
Evaluation of impact models for body-to-barrier collisions, A. Mereles, M. Varanis, A.
Silva (Universidade Federal da Grande Dourados), J. M.Balthazar (Instituto
Tecnológico de Aeronáutica), R. Pederiva (Universidade Estadual de Campinas)
15:30 1037 ICONNE16 Using the tether solution for orbital maneuverings of spacecrafts, J. M. Nascimento,
A. F. B. A. Prado (Instituto Nacional de Pesquisas Espaciais)
74
ORAL SESSION TUE / 5
ICONNE - Non-linear Phenomena (Room 9 – Bldg. 3 / Laranja) TIME CODE Nonlinear methods
8:30 Invited Nonlinear dynamics of micro and nano systems for superior devices, M. I. Younis
(State University of New York at Binghamton, USA)
9:10 1380 ICONNE17
Non-ideal magnetopiezoelastic energy harvesting with nonlinear piezoelectric
coupling, I. Iliuk (Universidade Tecnológica Federal do Paraná), J. M. Balthazar
(Instituto Tecnológico de Aeronáutica), R. Brasil (Universidade Federal do ABC), A.
M. Tusset (Universidade Tecnológica Federal do Paraná), J. Piqueira (Universidade
de São Paulo)
9:30 1570 ICONNE18 On the nonlinear dynamics of a bi-stable piezoelectric energy harvesting device, A.
B. da C. Junior, V. Lopes, J. Peterson (Universidade Estadual do Rio de Janeiro)
9:50 1652 ICONNE19 Generalized q-distributions in reliability modeling, J. V. S. Novo, S. A. B. V. de Melo
(Universidade Federal da Bahia), Edilson Assis (Universidade Católica do Salvador)
10:10 Coffee-break
TIME CODE Nonlinear methods
10:40 2029 ICONNE20
Identification of nonlinear system using evolutionary differential and grey wolf
optimizer, J. L. de Oliveira, M. Bergamini , M. Bonfim, G. Leandro (Universidade
Federal do Paraná)
11:00 2054 ICONNE21
Reliability analysis by dynamic fault trees - a case study in sewage treatment
systems, C. L. S. F. Filho, E. Assis, L. Silva, A. L. L. B.Costa (Universidade Católica do
Salvador)
11:20 2822 ICONNE22 Integral transform analysis of a simple alcoholic fermentation model, H. Serrano, L.
A. Sphaier, I. F. Pinheiro, F. Peixoto (Universidade Federal Fluminense)
11:40 5233 ICONNE23
Sommerfeld effect in a cantilever beam with double non-ideal sources, A. Kossoski,
A. M. Tusset, G. Santos, R. T. Rocha (Universidade Tecnológica Federal do Paraná),
F. C. Janzen (Universidade Estadual Paulista), J. M. Balthazar (Instituto Tecnológico
de Aeronáutica)
12:00 Lunch
TIME CODE Numerical methods
13:30 0103 ICONNE24 Nonlinear dynamics of an energy harvesting embarked pendulum, R. Brasil, P. E.
Santos (Universidade Federal do ABC)
13:50 0119 ICONNE25 Control of rotating machines bases resonance by means axial force, E. Padua, R.
Brasil (Universidade Federal do ABC)
14:10 0175 ICONNE26
Energy harvesting by applying a hysteretic damped NES device into a portal frame
platform of two-degrees-of-freedom, R. T. Rocha (Universidade Tecnológica Federal
do Paraná), J. M. Balthazar (Instituto Tecnológico de Aeronáutica), A. M. Tusset
(Universidade Tecnológica Federal do Paraná), F. C. Janzen (Universidade Estadual
Paulista)
14:30 0180 ICONNE27
A note on OLFC control applied in a parametrically excited pendulum, A. M. Tusset,
B. Marin, R. T. Rocha (Universidade Tecnológica Federal do Paraná), F. C. Janzen
(Universidade Estadual Paulista), J. M. Balthazar (Instituto Tecnológico de
Aeronáutica)
14:50 0197 ICONNE28
On a liquid tuned damper and nonlinear mass tuned damper passive application in
a building to reduce high vibrations, W. B. Lenz, A. M. Tusset, R. T. Rocha
(Universidade Tecnológica Federal do Paraná), F. C. Janzen (Universidade Estadual
Paulista), J. M. Balthazar (Instituto Tecnológico de Aeronáutica)
15:10 0256 ICONNE29
Revisiting the dual-spin spacecraft dynamics during plat-form spin-up with limited
torque supply, J. M. Balthazar, E. Cereja, A. Nabarrete (Instituto Tecnológico de
Aeronáutica), A. M. Tusset, R. T. Rocha (Universidade Tecnológica Federal do
Paraná), J. L. P. Felix (Universidade Federal da Fronteira Sul), R. Brasil (Universidade
Federal do ABC)
15:30 0289 ICONNE30
Optimal control applied in slewing control for a flexible structure, G. P. dos Santos,
A. M. Tusset, R. T. Rocha (Universidade Tecnológica Federal do Paraná), F. C.
Janzen (Universidade Estadual Paulista), J. M.Balthazar (Instituto Tecnológico de
Aeronáutica)
75
ORAL SESSION WED / 6
ICONNE - Non-linear Phenomena (Room 9 - Bldg. 3 / Laranja) TIME CODE Numerical methods
8:30 0587 ICONNE31 Dynamic modeling, flight control and trajectory planning for a balloon-hexacopter,
D. A. dos Santos, R. Afonso (Instituto Tecnológico de Aeronáutica)
8:50 0653 ICONNE32
Largest Lyapunov exponent and attractors applied to stability study of nuclear
reactors, A. L. Costa, W. A. Coloma, C. Pereira (Universidade Federal de Minas
Gerais)
9:10 0733 ICONNE33
Dynamical analysis and control of a parametrically excited elastic pendulum, J. M.
Balthazar, T. C. L. Marsola, M. de F. V. Pereira (Instituto Tecnológico de
Aeronáutica), A. M. Tusset (Universidade Tecnológica Federal do Paraná)
9:30 0769 ICONNE34
Computational improvement in the evaluation of dynamic integrity with Monte
Carlo method, K. C. B. Benedetti, F. M. A. da Silva (Universidade Federal de Goiás),
P. B. Goncalves (Pontifícia Universidade Católica do Rio de Janeiro)
9:50 0777 ICONNE35
Analysis of restrictions on an extended time delay feedback control applied to a
SMA-pendulum system, D. D. A. Costa, M. Savi (Universidade Federal do Rio de
Janeiro)
10:10 Coffee-break
TIME CODE Numerical methods
10:40 0883 ICONNE36 Ship drift angle analysis in unsheltered channel navigation and application of escort
tugs, G. Bisinotto, R. D. Barrera, E. A. Tannuri (Universidade de São Paulo)
11:00 0963 ICONNE37
State dependence riccati equation for the training of the echo state network for
control half-car system, A. M. Tusset (Universidade Tecnológica Federal do Paraná),
E. Moletta (Faculdades Ponta Grossa), J. Pontes, H. Siqueira (Universidade
Tecnológica Federal do Paraná)
11:20 1369 ICONNE38
A study of the errors in swing-by design by the "patched-conics" approach applied to
the galilean moons, R. B. Negri, A. F. B. de A. Prado (Instituto Nacional de Pesquisas
Espaciais)
11:40 1151 ICONNE39
P and T waves heart modeling with Van der Pol oscillator, G. M. V. Ladeira, G. V.
Lima (Universidade Federal de Uberlândia), J. M. Balthazar (Instituto Tecnológico
de Aeronáutica), A. M. Tusset (Universidade Tecnológica Federal do Paraná), A.
Bueno (Universidade Estadual Paulista)
12:00 Lunch
TIME CODE Numerical methods
13:30 1299 ICONNE40
Numerical simulation of welding residual stress and the effect on frequency
variations, V. Macanhan (Laboratório Nacional de Astrofísica), E. Correa
(Universidade Federal de Itajubá), M. Arruda (Laboratório Nacional de Astrofísica)
13:50 1329 ICONNE41
A numerical-experimental methodology to characterize thermoplastic materials
submitted to large strains, N. M. Castoldi, F. L. Bresolin, J. Vassoler (Universidade
Federal do Rio Grande do Sul)
14:10 1646 ICONNE42 Bayesian dynamic model updating using markov chain Monte Carlo methods, R. B.
Macedo, A. Nabarrete, J. A.Hernandes (Instituto Tecnológico de Aeronáutica)
14:30 2018 ICONNE43
Numerical investigation an energy harvesting system by fractional damping, M.
Varanis (Universidade Federal da Grande Dourados), R. T. Rocha, A. M. Tusset
(Universidade Tecnológica Federal do Paraná), J. M. Balthazar (Instituto
Tecnológico de Aeronáutica), C. Oliveira, P. Brunetto (Universidade Federal da
Grande Dourados)
14:50 2598 ICONNE44
A comparison of two numerical algorithms for computing optimal low-thrust
trajectories, F. das C. Carvalho, S. da Silva Fernandes (Instituto Tecnológico de
Aeronáutica), J. V. B. Romão (Universidade de São Paulo)
15:10 -- --
15:30 -- --
76
ORAL SESSION MON / 4
OSPE - Offshore and Petroleum Engineering (Room 8 - Bldg. 3 / Laranja) TIME CODE Offshore and Petroleum Engineering
8:30 Invited Reducing life-cycle costs and improving the energy efficiency of large floating
production platforms J. A. Ferrari Jr (Shell/Brazil)
9:10 0087 OSPE1
Wind loads on the topside of a FLNG vessel: wind tunnel model tests, G. Nader
(Universidade de São Paulo), P. J. S. Jabardo (Instituto de Pesquisa Tecnológica do
Estado de São Paulo), G. B. Martins (Universidade de São Paulo), G. Rosetti
(Argonáutica Engenharia e Pesquisas), K. Nishimoto (Universidade de São Paulo)
9:30 0419 OSPE2
Selection process of an offshore petroleum production system that accounts
technical, technological, economic, environmental and logistic attributes, L. J. G.
Castaño, C. Morooka (Universidade Estadual de Campinas)
9:50 2875 OSPE3
An experimental study on the structural behavior of a flexible pipe under axial
compressive loads using digital image correlation, R. de A. Amarante, C. P. Pesce, R.
Ramos Jr. (Universidade de São Paulo), R.l Santiago (Universidade Federal do ABC),
J. R. M. de Sousa (Universidade Federal do Rio de Janeiro), M. A. Rabelo
(Universidade Federal de Santa Catarina)
10:10 Coffee-break
TIME CODE Offshore and Petroleum Engineering
10:40 0649 OSPE4 Transient mathematical model for kick detection, J. Galdino, G. M. de Oliveira, A.
Franco, C. O. R. Negrao (Universidade Tecnológica Federal do Paraná)
11:00 0716 OSPE5
Simulation of macro-emulsion flow in stratified reservoirs considering capillary
effects, R. V. Ponce F., H. Lima, M. Carvalho (Pontifícia Universidade Católica do Rio
de Janeiro)
11:20 0896 OSPE5 Flow rate effect on polymer reversible retention in sandstone, V. H. S. Ferreira, R.
Moreno (Universidade Estadual de Campinas)
11:40 0982 OSPE6
Experimental image analisys of gas bubbles path line in centrifugal pump impeller, J.
L. Biazussi, R. Perissinotto, J. Saturnino, W. M. Verde, M. S. de Castro, A. Bannwart
(Universidade Estadual de Campinas)
12:00 Lunch
TIME CODE Offshore and Petroleum Engineering; Piping and Pressure Vessels
13:30 1101 OSPE7
Analysis of accident in drilling and production land rigs, J. Araújo (Instituto Federal
de Alagoas), R. da S. Magalhães (Universidade Federal do Sul da Bahia), L. Santos
(Instituto Federal de Alagoas), M. C. Rodrigues (Universidade Federal da Paraíba)
13:50 1253 OSPE8
Fully submerged point absorber in Santa Catarina, Brazil - a feasibility study, L. S. P.
da Silva (Universidade de São Paulo), T. P. Tancredi (Universidade Federal de Santa
Catarina), N. Sergiienko (University of Adelaide), H. M. Morishita (Universidade de
São Paulo)
14:10 1596 OSPE9
Hydrate phase equilibrium using water-based drilling fluid, C. Kakitani, J. Karp, D. C.
Marques, L. Rossi, R. Morales, A. Sum (Universidade Tecnológica Federal do
Paraná)
14:30 2006 OSPE10 Sea conditions influence on solar energy harvesting, E. A. da Silva Jr., I. Lache
(Centro Federal de Educação Tecnológica Celso Suckow da Fonseca)
14:50 2270 OSPE11 Characterization of pressure drop and velocity field in a gas-liquid cyclone separator,
G. E. O. Celis, J. Loureiro, A. P. S. Freire (Universidade Federal do Rio de Janeiro)
15:10 0601 OSPE12
Dynamic response analysis of steel catenary riser under the influence of an internal
slug flow, J. Meléndez (Instituto Nacional de Pesquisas Espaciais), J. Avila
(Universidade Federal do ABC)
15:30 1916 PIPV1
Structural thermal transient numerical analysis of residual stresses in cylindrical
pressure vessels submitted to weld repair according to standard ASME PCC-2-2015, J.
Almeida (Universidade Federal da Bahia), M. C. Rodrigues (Universidade Federal da
Paraíba)
77
ORAL SESSION THU / 7
PROD - Product Engineering (Room 9 - Bldg. 3 / Laranja) TIME CODE Product Engineering
8:30 Invited Servitization methodology: A case of a medical equipment manufacturer from
product offering to service provider, H. Rozenfeld (Universidade de São Paulo)
9:10 0079 PROD1
Development of a topology optimization method for tailored forming multi-material
design, R. da S. de Siqueira, R. Lachmayer, I. Mozgova (Leibniz Universität
Hannover, Germany)
9:30 0200 PROD2 Simulation of uniaxial tensile test through of finite element method, J. P. Baltar, C.
Carvalho (Centro Universitário Salesiano de São Paulo)
9:50 2704 PROD3 Numerical and experimental analysis of FRF's of structural composite materials, C.
Silva, A. Diacenco (Centro Universitário de Itajubá)
10:10 Coffee-break
TIME CODE Product Engineering
10:40 0406 PROD4 Development and validation of design tool for concept choice on robustness,
reliability and safety criteria, V. Marini (Technical University of Denmark, Denmark)
11:00 0485 PROD5
Development of a wrist-hand orthosis for children with neurological and motors
disabilities: conceptual design and mock-up, P. Kaneko, A. M. Souza, D. Kemmoku,
L. Nascimento, G. B. Schiavon, F. H. Moro, Z. C. Silveira, L. Gerez (Universidade de
São Paulo)
11:20 1071 PROD6
Conceptual design of an adsorption refrigeration system using exhaust gases in
trucks, J. C. A. Merino (Universidad Peruana de Ciencias Aplicadas, Peru), K.
Hatakeyama (ABCM)
11:40 1159 PROD7
Weight reduction through an increase in material efficiency, F. Resende, A.
Bracarense (Universidade Federal de Minas Gerais), R. Gibbs (Fiat Chrysler
Automobiles)
12:00 Lunch
TIME CODE Product Engineering
13:30 1243 PROD8
Design of active suspension mechanism, F. Malvezzi (Instituto Mauá de Tecnologia),
J. V. D. Colatto (BRAVE - Brasil Eletric Vehicles), R. Pellicci, M. F. de Macedo, F. T.
Monteiro (Mauá Institute of Technology)
13:50 1429 PROD9
Foucault brake for bench small scale applications: design and evaluation, F. MICCO,
P. S. Schneider (Universidade Federal do Rio Grande do Sul), C. Rech (Centro
Universitário La Salle)
14:10 1497 PROD10 Application of taguchi's loss function and signal-to-noise ratio, L. Lamy, A. C. Neto
(Universidade Federal do Paraná)
14:30 0333 PROD11 An innovative methodology for toggle clamping device design, M. V. de O. e Costa,
E. H. Murai , F. da S. Rosa, D. Martins (Universidade Federal de Santa Catarina)
14:50 5941 PROD12
Conceptual design of a palletizing machine for microbreweries, L. M. de O. da Costa
(Instituto Federal de Educação, Ciência e Tecnologia Fluminense), A. Pertence
(Universidade Federal de Minas Gerais)
15:10 -- -- --
15:30 -- -- --
78
ORAL SESSION TUE / 5
QUSM - Quantification of Uncertainty and Stochastic Modeling (Room 8 - Bldg. 3 / Laranja) TIME CODE Quantification of Uncertainty and Stochastic Modeling
8:30 0248 QUSM1
Global optimization based on metamodels using radial basis function with
application to aircraft wings, N. Diaz, N. Manzanares Filho, E. da Silva (Universidade
Federal de Itajubá)
8:50 0263 QUSM2
Parameters identification with evaluation of uncertainties using sensitivity method
and covariance matrix analysis, A. Löw, H. Gomes, E. Costamilan (Universidade
Federal do Rio Grande do Sul)
9:10 0341 QUSM3
Stochastic torsional vibration analysis of a vertical drill-string in the transition
between two rock layers, D. de M. Lobo, T. Ritto, D. Castello (Universidade Federal
do Rio de Janeiro)
9:30 0359 QUSM4 Uncertainty analysis on stability of a rigid rotor with hydrodynamic bearings, L. B.
Visnadi, H. F. de Castro (Universidade Estadual de Campinas)
9:50 0363 QUSM5
Uncertainty compensation in damage identification by means of the approximation
error approach, G. L. S. da Silva, D. Castello, L. M. A. Borges (Universidade Federal
do Rio de Janeiro)
10:10 Coffee-break
TIME CODE Quantification of Uncertainty and Stochastic Modeling
10:40 0819 QUSM6
Flexural wave propagation in slowly varying thin plate strip using a finite element
approach, A. T. Fabro (Universidade de Brasília), N. Ferguson (University of
Southampton), B. Mace (University of Auckland)
11:00 1335 QUSM7 Reliability based design optimization using fuzzy logic, A. Dourado, F. Lobato, A. A.
Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia)
11:20 1525 QUSM8
Quantification of material uncertainties in modal analysis of a plate using a
gaussian process and finite element method, T. H. G. Lobato, R. G. da Fonseca, N.
Soeiro (Universidade Federal do Pará)
11:40 1606 QUSM9
Gas flow measurement under high pressure flowing conditions: analysis of the
uncertainty of the reported measurement at standard conditions, M. Mosckem, M.
Coelho, R. Ramos (Universidade Federal do Espírito Santo)
12:00 Lunch
TIME CODE Quantification of Uncertainty and Stochastic Modeling
13:30 1887 QUSM10
Analysis of a flexible rotating shaft supported by hydrodynamic bearings considering
uncertainties, L. R. de S. Queiroz, R. A. Borges (Universidade Federal de Goiás), A.
A. Cavalini Jr (Universidade Federal de Uberlândia), V. Steffen Jr (Universidade
Federal de Uberlândia)
13:50 1923 QUSM11 Structural reliability analysis with polynomial expansion, E. Medeiros, A. Torii
(Universidade Federal da Paraíba)
14:10 2203 QUSM12
Petri net based reliability analysis of thermoelectric plant cooling tower, A. Melani, G.
F. M. de Souza, C. A. Murad, A. Caminada Netto, S. I. Nabeta (Universidade de São
Paulo)
14:30 2478 QUSM13 Statistical calibration of 2DOF vortex-induced vibration phenomenological model, G.
M. G. Bernadá, F. Rochinha (Universidade Federal do Rio de Janeiro)
14:50 2894 QUSM14 Applying the Monte Carlo λ-Neumann model to stochastic reaction-diffusion
problems, R. M. F. Squarcio (Universidade Tecnológica Federal do Paraná)
15:10 -- -- --
15:30 -- -- --
79
ORAL SESSION WED / 6
SMST - Smart Materials and Structures (Room 10 - Bldg. 3 / Laranja) TIME CODE Smart Materials and Structures
13:30 0434 SMST1 Nonlinear dynamics of a rotating system considering contact with a shape memory
alloy coated stator, R. V. Moreira, A. Paiva (Universidade Federal Fluminense)
13:50 0629 SMST2 Thermo-mechanical behaviour of coiled monofilament polymer fibers, S. S. Mendes,
L. Nunes (Universidade Federal Fluminense)
14:10 0838 SMST3 Analysis of piezoelectric sensor networks for spatial modal filters and active vibration
control, F. Horiy, A. Shigueoka, M. A. Trindade (Universidade de São Paulo)
14:30 0881 SMST4
Robust design and uncertainty analysis of an energy harvesting resonant device, P.
Martins (Universidade de São Paulo), M. A. Trindade (Escola de Engenharia de São
Carlos)
14:50 0995 SMST5 The influence of heat treatments on NiTi springs hysteresis loop, H. de S. Oliveira, S.
A. Bandeira, A. S. de Paula (Universidade de Brasília)
15:10 1180 SMST6 Experimental verification of the self-powered active control of aeroelastic oscillations
using piezoelectric material, D. D'Assunção (Universidade de São Paulo)
15:30 -- -- --
80
ORAL SESSION THU / 7
SMST - Smart Materials and Structures (Room 10 - Bldg. 3 / Laranja) TIME CODE Smart Materials and Structures
8:30 1416 SMST8
Combining shape memory alloy wire actuators with permanent magnets for a multi-
stable smart structure, T. de P. Sales (Universidade Federal de Uberlândia), D. Rade
(Instituto Tecnológico de Aeronáutica), D. Inman (University of Michigan, USA)
8:50 1487 SMST9 Outlier identification in impedance-based SHM, B. P. Barella, S. W. Rezende, J. P. M.
Bento, J. R. V. de Moura Jr (Universidade Federal de Goiás)
9:10 1498 SMST10
Probability of damage in structures by the use of Lamb Waves and RAPID algorithm,
S. W. Rezende, B. P. Barella, J. P. M. Bento, J. R. V. Moura Jr (Universidade Federal
de Goiás)
9:30 1513 SMST11 Vibration control using multiple piezoelectric absorbers, J. A. B. Gripp, D. Rade
(Instituto Tecnológico de Aeronáutica)
9:50 1526 SMST12
Nonlinear dynamics and chaos of a SMA-Hybrid composite oscillator, L. Vignoli
(Universidade Federal do Rio de Janeiro), F. Rodrigues (Universidade Federal do
Rio Grande do Norte), M. Savi (Universidade Federal do Rio de Janeiro), W. M.
Bessa (Universidade Federal do Rio Grande do Norte)
10:10 Coffee-break
TIME CODE Smart Materials and Structures
10:40 1546 SMST13
Nonlinear dynamics of non-smooth piezoelectric energy harvesting system, L. L. da
S. Monteiro, R. Ai (Centro Federal de Educação Tecnológica Celso Suckow da
Fonseca), M. Savi, P. C. da C. Monteiro Jr (Universidade Federal do Rio de Janeiro),
B. T. Duarte, P. M. C. L. Pacheco (Centro Federal de Educação Tecnológica Celso
Suckow da Fonseca)
11:00 1890 SMST14
Real-time structural health monitoring method based on the electromechanical
impedance approach applied on concrete structures, R. N. F. Silva, K. M. Tsuruta, R.
M. Finzi Neto, A. A. Cavalini Jr, V. Steffen Jr (Universidade Federal de Uberlândia)
11:20 1912 SMST15
Experimental analysis of an energy harvesting system with piezoelectric and shape
memory alloy elements, A. Adeodato, B. T. Duarte, R. A. A. de Aguiar, L. L. da S.
Monteiro (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), M.
Savi (Universidade Federal do Rio de Janeiro), P. M. C. L. Pacheco (Centro Federal
de Educação Tecnológica Celso Suckow da Fonseca)
11:40 1917 SMST16
Finite element analysis of a shape memory alloy honeycomb vibration absorber, G.
G. Averbug, P. M. C. L. Pacheco, R. A. A. de Aguiar (Centro Federal de Educação
Tecnológica Celso Suckow da Fonseca), M. Savi (Universidade Federal do Rio de
Janeiro), A. C. R. Rapozo (Centro Federal de Educação Tecnológica Celso Suckow
da Fonseca)
12:00 Lunch
TIME CODE Smart Materials and Structures
13:30 2047 SMST17
Gust load alleviation in a smart idealized wing, T. Versiani, F. Silvestre, A. B.
Guimarães Neto, D. Rade, R. G. A. da Silva, R. Bertolin, G. Silva, P. Gonzalez
(Instituto Tecnológico de Aeronáutica)
13:50 2655 SMST19
Dynamics of a self-folding cylindrical system actuated by SMA, G. V. Rodrigues, L.
Fonseca, M. Savi (Universidade Federal do Rio de Janeiro), A. Paiva (Universidade
Federal Fluminense)
14:10 2878 SMST19
Piezoelectric energy harvest generator under different application of loads, L. A. O.
Araujo (Universidade Federal de São Carlos), C. Fortulan (Universidade de São
Paulo), C. Foschini (Universidade Estadual Paulista Julio de Mesquita Filho), S. J. de
Moraes Filho (Universidade Federal de São Carlos)
14:30 2898 SMST20 Inferring superelasticity parameters of NiTi SMA from instrumented indentation data,
F. F. R. Pereira (University of Cambridge, UK)
14:50 5394 SMST21
Evaluation of adhesives used on e/m impedance method applied in shaft under
fatigue tests, K. M. Tsuruta, C. Guimarães, D. de S. Rabelo, A. A. Cavalini Jr, R. M.
Finzi Neto, V. Steffen Jr (Universidade Federal de Uberlândia)
15:10 -- -- --
15:30 -- -- --
81
ORAL SESSION MON / 4
SOLM - Solid Mechanics (Room 10 - Bldg. 3 / Laranja) TIME CODE Structural Statics and Dynamics
8:30 0092 SOLM1
Enriched modified local green’s function method applied to elasto elastic problems,
M. P. da Silva (Pontifícia Universidade Católica do Paraná), R. D. Machado
(Universidade Federal do Paraná), J. E. Abdalla Filho, Y. S. Hsu (Pontifícia
Universidade Católica do Paraná)
8:50 0372 SOLM2 Structural evaluation of ergometric equipment available by the project open-air
academies in public squares, C. Vimieiro (Universidade Federal de Minas Gerais)
9:10 0412 SOLM3
Wear analysis of a plunger of diesel injection pump combining experimental test and
finite element simulation, J. G. Farias (Robert Bosch Ltda.), Marco A. Luersen, C. H.
Silva (Universidade Tecnológica Federal do Paraná)
9:30 0606 SOLM4 Energy balance approach to analyze crankshaft deep rolling simulation results, L.
Fonseca, A. Faria (Instituto Tecnológico de Aeronáutica)
9:50 0702 SOLM5 A first study on hybrid-mixed stress formulation on topology optimization, L. A. P.
Navarro, W. Góis (Universidade Federal do ABC)
10:10 Coffee-break
TIME CODE Structural Statics and Dynamics
10:40 1069 SOLM6
A lower bound limit analysis of reissner-mindlin plates by finite element and second-
order cone programming, E. L. B. Cavalcante, P. I. B. de Queiroz, E. L. Neto (Instituto
Tecnológico de Aeronáutica)
11:00 1124 SOLM7
Nanotechnology for personal protection systems: the new nano-modified bullet
proof vest development, A. Avila, A. Oliveira, S. G. Leão, F. L. R. de M. Lima, G.
Arantes, M. G. M. Martins, M. N. Mello (Universidade Federal de Minas Gerais)
11:20 1321 SOLM8 The discrete element method (DEM) applied to dynamic soil-structure interaction, E.
MESQUITA, M. A. Di G. Nery (Universidade Estadual de Campinas)
11:40 1349 SOLM9
Strain energy and smart mesh refinement in topology optimization of composite
microstructures, P. H. A. Bezerra (Universidade Federal do Rio Grande do Norte), D.
Junior(Universidade Federal Rural do Semi-Arido), J. C. A. C. Júnior(Universidade
Federal do Rio Grande do Norte)
12:00 Lunch
TIME CODE Structural Statics and Dynamics
13:30 1351 SOLM10
Topology optimization of bi-dimensional composite structures under
thermomechanical loads, P. H. A. Bezerra (Universidade Federal do Rio Grande do
Norte), D. Junior (Universidade Federal Rural do Semi-Arido), J. C. A. Costa Jr
(Universidade Federal do Rio Grande do Norte)
13:50 1383 SOLM11 Numerical analysis of GFRP poles, P. Santos, C. A. Cimini Jr (Universidade Federal
de Minas Gerais)
14:10 1384 SOLM12
Numerical evaluation of local buckling coefficients of “S” stiffened profiles with sloped
web, P. Santos, L. M. de Freitas, M. F. Brandão, F. Rodrigues (Universidade Federal
de Minas Gerais)
14:30 1524 SOLM13
Thermoelastic topology optimization with multiple materials for maximum stiffness
using material interpolation scheme with penalization, L. A. Jaimes, R. Pavanello, W.
Vicente (Universidade Estadual de Campinas)
14:50 1571 SOLM14 Dynamic response of Timoshenko beams on Pasternak Foudation, L. Soares, W. K.
da S. Bezerra, S. dos S. Hoefel (Universidade Federal do Piauí)
15:10 1604 SOLM15 Dynamic analysis of a viscoelastic Timoshenko beam, A. S. da C. Azevêdo, S. dos S.
Hoefel (Universidade Federal do Piauí)
15:30 1084 SOLM16 Free vibration analysis for Euler-Bernoulli beam on Pasternak foundation, W.
Bezerra, L. Soares, S. S. Hoefel (Universidade Federal do Piauí)
82
ORAL SESSION TUE / 5
SOLM - Solid Mechanics (Room 10 - Bldg. 3 / Laranja) TIME CODE Structural Statics and Dynamics
8:30 1820 SOLM16
Numerical experimental analysis of a wind blade from Verne 555 wind turbine
model, A. de Morais, D. Araujo, M. A. M. Shzu, M. V. G. de Morais, S. Avila
(Universidade de Brasília)
8:50 1986 SOLM17
Dimensioning of the frontal suspension system of the double-A type through
topological analysis, D. S. de F. e Silva, T. Ferreira (Instituto Federal de Minas
Gerais), T. Moreira (Centro Federal de Educação Tecnológica de Minas Gerais), G.
Melchiades, L. Ferreira (Instituto Federal de Minas Gerais)
9:10 2390 SOLM18
On the damage evolution of reinforced concrete I-beam bridges due to dynamic
vehicle-structure interaction, A. Imai, T. Abeche, R. D. Machado (Universidade
Federal do Paraná)
9:30 2404 SOLM19
Structural topology optimization of a fluid-structure system, J. B. D. Moreira, E. M.
Cesconeto, E. Lisboa, F. Link, W. J. P. Casas (Universidade Federal do Rio Grande do
Sul)
9:50 2431 SOLM20
Recursive methodology applied to determination of semi-analytical solution of
anisotropic thick plates in linear bending, T. de V. Lisbôa, R. Marczak (Universidade
Federal do Rio Grande do Sul)
10:10 Coffee-break
TIME CODE Structural Statics and Dynamics
10:40 2436 SOLM21 A metamodel for the maximum stress of metal lugs, J. P. Pesci, J. A. Hernandes
(Instituto Tecnológico de Aeronáutica), E. Magalhaes (Embraer)
11:00 2440 SOLM22
A note on elastoplastic residual stresses in composite beams, P. P. Kenedi (Centro
Federal de Educação Tecnológica Celso Suckow da Fonseca), L. Vignoli
(Universidade Federal do Rio de Janeiro)
11:20 2465 SOLM23
Sizing optimization of truss structures under time-dependent stress constraints using
the equivalent static loads method, R. B. Santos, A. Pereira (Pontifícia Universidade
Católica do Rio de Janeiro)
11:40 2472 SOLM24
Evolution in analysis of a formula SAE chassis using finite element method, Menezes
Miguel, Victor Belote, Gustavo Storti, Carlos Alberto Alves Viana, Rafael Marques,
Amarildo Tabone Paschoalini (Universidade Estadual Paulista)
12:00 Lunch
TIME CODE Structural Statics and Dynamics
13:30 2736 SOLM25 Practical approach to stress and displacement calculation of a clamp fixture for quick
openings of pressure vessels, V. E. Beal, M. Araújo, J. Oliveira (SENAI CIMATEC)
13:50 2778 SOLM26 The development of a race car monocoque, G. Gonçalves, L. F. Perucci, R. Marchi
(Universidade de São Paulo)
14:10 2821 SOLM27
Test bench for experimental study of the geometric stiffness in vibration of beams as
support of rotating machines, A. de M. Wahrhaftig (Universidade Federal da Bahia),
R. Brasil (Universidade Federal do ABC), G. S. C. Cordeiro (Universidade Federal da
Bahia)
14:30 5513 SOLM28
Analysis of composite and functionally graded plates behaviour concerning to
buckling, J. Moita (IDMEC - Instituto Superior Técnico. Universidade de Lisboa -
Portugal), C. M. M. Soares, J. Herskovits (Universidade Federal do Rio de Janeiro)
14:50 5949 SOLM29
Stress analysis of a diffusion bonding device under loading and thermal expansion,
G. S. C. Vieira, G. Nuernberg, N. Y. L. Pabon, Marcia Mantelli (Universidade Federal
de Santa Catarina)
15:10 -- -- --
15:30 -- -- --
83
ORAL SESSION WED / 6
SOLM - Solid Mechanics (Room 10 - Bldg. 3 / Laranja) TIME CODE Constitutive Models
8:30 0112 SOLM30 Algebraic multigrid via wavelet applied to advection-diffusion problem, F. Fagundes,
R. D. Machado, V. Mariani (Pontifícia Universidade Católica do Paraná)
8:50 1197 SOLM31
Use of green composites for manufacturing of small size boats in the amazon:
numerical and experimental evaluations – part II, M. F. Carvalho, L. D. Rodrigues, J.
C. Valente, J. A. F. Raiol, M. Xavier, L. P. B. de Souza, F. R. B. da Silva (Universidade
Federal do Pará)
9:10 1634 SOLM32
Study of a laminated composite under simple shear, M. C. de O. Telles, C. S.
Moreira, S. S. Mendes, R. P. Faria, M. C. de O. Telles, L. Nunes (Universidade
Federal Fluminense)
9:30 1799 SOLM33
Stresses measurements in simple shear test for a polymer under large deformations,
F. Araújo (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), C.
S. Moreira (Universidade Federal Fluminense), O. L. de M. Filho (Centro Federal de
Educação Tecnológica Celso Suckow da Fonseca), N. Brilhante, L. Nunes
(Universidade Federal Fluminense)
9:50 1018 SOLM34
A critical analysis on the complex modulus provided by DMA, I. R. Henriques, L. M.
A. Borges, D. Castello, B. G. Soares, M. Costa (Universidade Federal do Rio de
Janeiro)
10:10 Coffee-break
TIME CODE Failure Criteria
10:40 0228 SOLM34 Structural analysis of beams under alternating axial loading, G. Duran (Universidade
de São Paulo), W. M. M. Filho (Centro Universitário da FEI)
11:00 1352 SOLM35 Fatigue design of sintered connecting rod applied to reciprocating compressor, F.
Lima (Embraco), R. Barbieri (Universidade do Estado de Santa Catarina)
11:20 -- -- --
11:40 -- -- --
12:00 Lunch
84
POSTER SESSION MON / 4
AERO – Aerospace Engineering CODE Aerodynamics
0568 P-AERO1
Viscous Effects Assessment Through Nonlinear Lifting-Line Theory, J. R. Chreim (Universidade
de São Paulo), J. L. D. Dantas (Instituto de Pesquisa Tecnológica do Estado de São Paulo), K.
P. Burr (Universidade Federal do ABC), M. Pimenta (Universidade de São Paulo)
1467 P-AERO2
Preliminary design of a device to perform roll cycle limit oscillations and wing rock
phenomenon in low-subsonic wind tunnel, H. L. Lebkuchen, R. G. A. da Silva (Instituto
Tecnológico de Aeronáutica)
1470 P-AERO3 Method of volumes and finite discretization strategies applied the aerodynamic profiles, M. L.
de A. Gemaque, L. Coelho, M. dos S. Viana, E. Lins (Universidade Federal do Pará)
2581 P-AERO4 A simplified model for the aerodynamic analysis of a small propeller, C. Rosolen, K. Ismail
(Universidade Estadual de Campinas)
2724 P-AERO5 Numerical analysis of an Aerodesign wing using Vortex Lattice Method and Finite Volume
Method, J. G. de Oliveira Junior, L. M. C. Ferro (Universidade Federal Rural do Semi-Arido)
2863 P-AERO6 Application of Galerkin method to the solution of aerodynamic models based on the lifting-
line theory, F. Liorbano, L. Pelegrineli, R. A. Angélico (Universidade de São Paulo)
2889 P-AERO7
Implementation of a Jacobian-free method for the instability analysis of a compressible flow
over an open cavity, M. S. Mathias, M. Medeiros (Universidade de São Paulo), V. Theofilis
(University of Liverpool - UK, Universidade Federal Fluminense)
CODE Aerospace Structures
0471 P-AERO8 Simulation of after-impact residual strength in stiffened composite panels, L. R. H. Motta, M.
Donadon (Instituto Tecnológico de Aeronáutica), P. R. Z. Pasquali (Embraer)
0547 P-AERO9
Structural Dynamic Characterization of Metallic Honeycomb Sandwich Panels for Aerospace
Applications, A. Domingues, A. T. Fabro, K. Sousa, M. V. G. de Morais, S. Carneiro
(Universidade de Brasília)
0590 P-AERO10
Development and production of ceramic matrix based on zirconia-titania reinforced with rare
earth oxide for aerospace exhaust systems, N. Gomes, R. A. S. Ferreira, Y. P. Yadava
(Universidade Federal de Pernambuco)
0778 P-AERO11
Fractographic analysis of co-bonded carbon fiber reinforced composites joints subjected to
mode I delamination, N. N. Silveira, R. Sales, C. Brito, G. Cândido, M. Donadon (Instituto
Tecnológico de Aeronáutica)
BIOE – Bioengineering CODE Biomaterials
0167 P-BIOE1 Bioactive response on Ti alloy surface induced by anodically bonded bioactive glass, E. M.
Szesz, C. Lepienski (Universidade Federal do Paraná)
1016 P-BIOE2 Mechanical Properties of Ti-47Nb and Ti-30Nb-8Zr Alloys, E. Monteiro, Y. Fonseca, A. C. C.
de Almeida, D. Fernandes, C. Elias (Instituto Militar de Engenharia)
1202 P-BIOE3 Lower limb prosthesis to ankle adapter manufactured in 3d printer, P. Macedo, W. Silva, D. R.
R. Guilhon, F. N. Pereira (Universidade Estadual de Campinas)
1284 P-BIOE4
A Two-Dimensional Model of Cell Migration, G. S. Rosalem, E. B. de Las Casas (Universidade
Federal de Minas Gerais), L. A. G. Torres (Universidade Federal dos Vales do Jequitinhonha
e Mucuri)
1953 P-BIOE5 Tribological evaluation of borided TI6AL4V alloy for biomedical applications, G. Hobold, L.
Guariglia, C. A. H. Laurindo, P. Soares (Pontifícia Universidade Católica)
1989 P-BIOE6 Tribocorrosion properties of titanium alloy modified by electrical discharge machining, L.
Bemben, B. M. de Freitas, C. A. H. Laurindo, P. Soares (Pontifícia Universidade Católica)
2430 P-BIOE7 Analysis of mechanical properties and solubility of phosphate glasses with different additions
of MgO, D. S. da L. Weiss, Paulo Soares (Pontifícia Universidade Católica do Paraná)
2467 P-BIOE8 Tribological studies of edm modified titanium surfaces, B. M. de Freitas, C. A. H. Laurindo, F.
L. Amorim, Paulo Soares (Pontifícia Universidade Católica)
2693 P-BIOE9
Microstructural and mechanical characterization of the Ti-25Ta-25Nb alloy for biomedical
applications, A. Pereira Jr, Ana P. R. A. Claro (Universidade Estadual Paulista Julio de
Mesquita Filho)
2700 P-BIOE10 Surface modification of the Ti7,5Mo alloy by anodic oxidation and incorporation of
calcium/phosphate, F. Mello (Universidade Estadual Paulista Julio de Mesquita Filho)
2713 P-BIOE11
Ti30Ta alloy fatigue strength after alkaline and heat treatment – Biomedical applications, K.
B. da Silva, A. P. R. A. Claro, V. Guimarães (Universidade Estadual Paulista Julio de Mesquita
Filho)
DETAILED PROGRAM - POSTER SESSION (DAY/AREA)
85
POSTER SESSION (CONT.) – MON / 4
2890 P-BIOE12
Production of polymeric nanocomposite powder for tissue engineering application, R.
Moretto, T. Santana, M. Meruvia, C. Marcondes (Pontifícia Universidade Católica do
Paraná), D. C. Potulski (Universidade Federal do Paraná), L. Viana (Universidade Federal de
Tocantins), G. I. B. de Muniz (Universidade Federal do Paraná)
2922 P-BIOE13
Tribo-mechanical behavior of Ti-25Nb AND Ti-25Nb-25Ta due the addition of beta stabilizers
elements, A. da Luz, G. Beilner, C. Siqueira (Universidade Federal do Paraná), G. de Souza
(Universidade Estadual de Ponta Grossa), C. Lepienski, J. N. Athayde (Universidade Federal
do Paraná), A. P. R. Alves. Claro (Universidade Estadual Paulista), N. Kuromoto
(Universidade Federal do Paraná)
5490 P-BIOE14
Characterization of the Ti25Ta25Nb3Sn experimental quaternary alloy after aging heat
treatment, C. Bortolini Jr, A. P. R. A. Claro, L. Rafael, G. Hilsdorf (Universidade Estadual
Paulista)
CODE Medical devices
1839 P-BIOE15 Classification of EEG Signals using Genetic Programming, F. Lopes, M. A. Meggiolaro
(Pontifícia Universidade Católica do Rio de Janeiro)
1710 P-BIOE16
Electromechanical Impedance Method Applied in a Silicone Rubber Model, G. L. Menegaz, K.
M. Tsuruta, G. Guimaraes, R. M. F. Neto, Valder Steffen Jr, C. Araújo (Universidade Federal
de Uberlândia)
1984 P-BIOE17
Nickel-Titanium electrode for radiofrequency hepatic ablation procedure, J. Porcino, A. J. T.
Cândido, G. Amaral, L. Fernandes, V. Almeida, G. Firmino, S. R. F. Rosa, A. C. Santos
(Universidade de Brasília)
2102 P-BIOE18 Communication device for deafblinds: testing with users for software and hardware
enhancements. T. R. Luz, R. Huebner (Universidade Federal de Minas Gerais)
COMB – Combustion and Environmental Engineering CODE Engine Combustion
0250 P-COMB1 A methodology for preliminary design of multi-fuel gas turbine combustor, F. F. de Paula, W.
O. I. Bohorquez (Universidade Federal de Juiz de Fora)
0699 P-COMB2
Characterization of flame development in the first cycles of operation in a direct injection
spark ignition engine fueled with anhydrous ethanol, M. Silva, S. D. M. Boggio, P. Lacava
(Instituto Tecnológico de Aeronáutica)
0762 P-COMB3 A predictive model for knock onset in spark-ignition engines using hydrous ethanol, F. R. dos
Santos Jr, C. Rufino, J. V. Ferreira (Universidade Estadual de Campinas)
1030 P-COMB4 Pollutant emissions investigation in a compression ignition engine during warm-up time, L. S.
Ferrari, N. Costa, R. E. P. Silva (Universidade Federal da Grande Dourados)
1053 P-COMB5
Simulation of Diesel engine using Biodiesel, F. Gonzaga (Universidade Federal do Pará), R.
Campos (Instituto Federal do Pará), M. Nogueira, D. R. S. Guerra (Universidade Federal do
Pará)
1292 P-COMB6 Comparison of compressed ignition engines emission consuming pure diesel fuel and mixture
of diesel and biodiesel, S. Leão, R. Oliveira, M. Nogueira (Universidade Federal do Pará)
1293 P-COMB7
Thermodynamic modelling development and calibration to support diesel engines indicating
measurements analysis, R. C. L. de Oliveira, J. L. M. Donatelli, J. J. C. S. Santos, C. C. M.
Cunha, A. Chun (Universidade Federal do Espírito Santo), A. Valiati (Termoelétrica Viana SA)
1306 P-COMB8
Combustion simulation in a gas turbine combustion chamber, E. Yamao (Institutos Lactec), P.
I. Ralickas, T. B. Marchese, F. Nara (Instituto de Tecnologia para o Desenvolvimento), E.
Yamao (Institutos Lactec), J. Borba (Universidade Federal do Paraná), F. Chiesa (Usina
Elétrica a Gás de Araucária)
1378 P-COMB9
Single-zone zero-dimensional model combining wiebe function with chemical equilibrium for
spark ignited internal combustion engines, H. de F. Linemburg (Universidade Federal de
Santa Catarina), R. de C. Catapan (Universidade Federal de Santa Catarina), A. A. M. Oliveira
(Universidade Federal de Santa Catarina)
1659 P-COMB10
Computational study of the effect of variable compression ratio on the performance of an
internal combustion engine, A. M. Jr (Universidade Federal de Santa Catarina), G. A. R.
Couto, G. R. de Souza (Universidade Federal de São João del Rei)
1693 P-COMB11
The effects of variable-length intake manifold on engine performance: literature review and
numercal study on HCCI engine, J. V. Alves, L. R. Cancino (Universidade Federal de Santa
Catarina)
2735 P-COMB12
Classification and comparison of fluidized bed used in the oxy-combustion process of mineral
coal, I. Destro, F. S. Nascimento, P. M. Guimarães, M. A. Nascimento, C. J. R. Coronado
(Universidade Federal de Itajubá)
86
POSTER SESSION (CONT.) – MON / 4
2781 P-COMB13
Performance and pollutant emissions on a small engine-driven generator operating with
soybean methyl-ester, K. C. C. Camargo, A. C. C. de Souza, R. E. P. Silva (Universidade
Federal da Grande Dourados)
2810 P-COMB14 The power increase and motor torque of Gm 1.0 Vhc with supercharger, G. Ramos, R. Correia
(Universidade Estadual do Maranhão)
DYNM – Dynamics, Control, Vibrations and Acoustics CODE Acoustics, Vibroacoustics
0594 P-DYNM1
Research on vibration steering wheel vehicle baja univates team, G. Lago, G. C. da Rosa, C.
H. Lagemann, R. C. Izquierdo, J. D. I. Silveira (Universidade do Vale do Taquari), M. A. Toso
(Instituto Federal de Santa Catarina), R. Garcia (Universidade Federal do Rio Grande do Sul)
1144 P-DYNM2 Development of piezoelectric transducers for acoustic levitation, I. Genuino, B. Lima, F.
Fazanaro (Universidade Federal do ABC), M. A. B. Andrade (Universidade de São Paulo)
2063 P-DYNM3
Flow resistivity, characteristic impedance and complex wave number assessment of coconut
fiber with thin thickness samples, N. Legat Filho, K. F. de Lima, N. Barbieri, F. J. H. Terashima,
V. A. Grossl (Pontifícia Universidade Católica do Paraná)
2108 P-DYNM4
Comparison of sound absorption coefficients of two fine materials according to ASTM E1050-
2012, F. J. H. Terashima, N. Legat Filho, P. D. Cirino, K. F. de Lima, N. Barbieri (Pontifícia
Universidade Católica do Paraná)
2111 P-DYNM5 Absorbing Boundary Methods for Acoustic Wave Modelling, J. Gomes, R. M. Moreira
(Universidade Federal Fluminense)
2152 P-DYNM6 Evaluation of rooms acoustic conditions for music teaching, A. C. M. Mansur (Pontifícia
Universidade Católica), E. F. Vergara (Universidade Federal de Santa Catarina)
2854 P-DYNM7
The influence of tyre cavity on road noise: A theoretical and experimental comparison, G. H.
Godoi, L. Donadon, R. M. Cunha (Universidade Federal de Minas Gerais), F. L. de C. Moura,
W. Barbosa (Fiat Chrysler)
ENTS – Energy and Thermal Sciences CODE Applied Heat and Mass Transfer
0409 P-ENTS1 Multiobjective optimization of plate-fin heat exchanger by Tsallis differential evolution, E. H.
de Vasconcelos Segundo, V. Mariani, L. Coelho (Pontifícia Universidade Católica do Paraná)
0780 P-ENTS2 Experimental analysis of a screen-covered groove heat pipe, T. A. Alves, L. Krambeck, P. H. D.
dos Santos (Universidade Tecnológica Federal do Paraná)
0800 P-ENTS3
Modeling a genset emissions fixation column and microalgae growth enhancement in large
scale photobioreactor, J. G. B. Martinez, G. Finger, Y. Kovara, W. Balmant, A. Mariano, J. V. C.
Vargas (Universidade Federal do Paraná)
1428 P-ENTS4
An inverse problem using green’s function and tfbgf method to identificate a moving heat
source in 3D heat conduction problem, S. Ribeiro, G. Oliveira, G. Guimarães (Universidade
Federal de Uberlândia)
1481 P-ENTS5
Analytical-experimental comparative study of a device destined to food heating by
electromagnetic induction, H. P. Lemke, L. H. P. Deoclecio, B. de O. Schneider, D. Galina, R.
A. Boroto (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo)
1556 P-ENTS6 Mathematical modeling of batch distillation of hydrocarbons produced by microalgae, I.
Costa, J. V. C. Vargas, W. Balmant (Universidade Federal do Paraná)
1715 P-ENTS7
On the monitoring of the gas-solid flows in industrial fluidized beds by using electrical charge
sensors, M. F. F. de Andrade, E. dos Reis (Instituto Federal de Educação, Ciência e
Tecnologia de São Paulo)
1880 P-ENTS8
Numerical simulation of temperature distribution on metal casting in vertical solidification, M.
F. F. de Andrade, E. dos Reis (Instituto Federal de Educação, Ciência e Tecnologia de São
Paulo)
2179 P-ENTS9
Numerical and experimental analysis of a copper thermosyphon, T. A. Alves, L. Krambeck, C.
R. Machado, F. Cabral, A. V. L. Machado, P. H. D. dos Santos (Universidade Tecnológica
Federal do Paraná)
2214 P-ENTS10
Analysis of temperature profile and efficiency of convective straight fins with temperature
dependent thermal conductivity and internal heat generation, L. Chaves, L. Ferreira, M. Curi
(Centro Federal de Educação Tecnológica Celso Suckow da Fonseca)
2272 P-ENTS11
Measurement of the external surface temperature of roots during preparation for fiberglass
posts, M. Duda (Pontifícia Universidade Católica do Paraná), I. Göhringer (Universidade
Positivo), G. Sluzala (Pontifícia Universidade Católica do Paraná), G. Haragushiku, M. C. L.
Giacomel (Universidade Positivo), I. Bassani, L. F. Botton (Pontifícia Universidade Católica do
Paraná)
87
POSTER SESSION (CONT.) – MON / 4
2631 P-ENTS12
A comparative analysis of the thermal performance of the refrigerants R134a, R245fa, R407c
And R600a during flow boiling in a microchannels heat sink, H. L. S. L. Leão (Instituto Federal
de Educação, Ciência e Tecnologia Goiano), G. Ribatski (Universidade de São Paulo)
2648 P-ENTS13 Flame profile in a porous radiant burner using 1/2” And 1/4” alumina’s spheres , G. Pante L.
de Campos, J. Duarte (Universidade de Fortaleza)
2653 P-ENTS14 Numerical study of heat transfer in extended surfaces with mutual radiation between parallel
fins, R. Sobral, J. Quirino, E. D. Correa, R. Gama (Universidade Estadual do Rio de Janeiro)
2732 P-ENTS15
Optimization applied to energy efficiency and thermal comfort of buildings: bibliometric
analysis on techniques and applications, C. F. da Silva, R. Z. Freire, N. Mendes (Pontifícia
Universidade Católica do Paraná)
2895 P-ENTS16
Modified resistance-in-series model - determination of mean concentration by integral
transformation, A. Venezuela, R. F. Cantão (Universidade Federal de São Carlos), R.
Ongaratto (Universidade Federal do Rio de Janeiro), R. Haneda (Centro Paulista de Estudos
em Agropecuária)
5024 P-ENTS17
Simultaneous estimation of thermal properties using genetic algorithm, F. Malheiros, J.
Gomes, A. Figueiredo, L. H. da S. Ignacio, G. Guimarães (Universidade Federal de
Uberlândia)
5321 P-ENTS18
Influence of convection on the interfacial heat transfer coefficient in upward solidification of
hypoeutectic Al-Si Alloys, E. Lins, G. Stieven, D. Soares (Universidade Federal do Pará), E.
Oliveira (Universidade Federal do Sul e Sudeste do Pará)
6491 P-ENTS19 Mathematical modelling and simulation of microalgae biomass drying process, F. P. Disconzi,
W. Balmant, J. V. C. Vargas (Universidade Federal do Paraná)
FLMR - Fluid Mechanics and Rheology CODE Computational Fluid Dynamics
0241 P-FLMR1 Computational Fluid Dynamics applied in a solar chimney analysis, F. A. Soares, P. Araujo, A.
Rezende (Instituto Militar de Engenharia)
0306 P-FLMR2
An assessment of different turbulence models on a CFD simulation of air flow past a S814
airfoi, C. C. de A. Bezerra, A. M. Araújo, A. A. C. Silva, C. L. dos Santos, E. C. R. Fernandes, E.
Menezes, G. J. A. M. Rocha, V. F. S. Rodrigues (Universidade Federal de Pernambuco), W. F. A. Borges,
J. A. P. da Costa (Instituto Federal de Pernambuco)
0385 P-FLMR3 Numerical simulation of turbulent flow over a backward-facing step, F. A. Soares, P. Araujo,
A. Rezende (Instituto Militar de Engenharia)
0417 P-FLMR4 Particle deposition in a ventilation duct bend, E. H. de V. Segundo, M. B. Lopes, V. Mariani
(Pontifícia Universidade Católica do Paraná)
0427 P-FLMR5 Numerical simulation of gas and liquid in internal loop airlift reactor, R. F. da Silva, V. Mariani
(Pontifícia Universidade Católica do Paraná)
0430 P-FLMR6 Study of Scale-Adaptive Simulation Model in Recirculating Flows, L. O. de C. Bovolato, P.
Greco (Universidade de São Paulo)
0432 P-FLMR7
Numerical study of the flow around slender bodies using a lagrangian vortex method, C. F. C.
Junior, A. Bimbato (Universidade Estadual Paulista Julio de Mesquita Filho), L. A. A. Pereira
(Universidade Federal de Itajubá)
0596 P-FLMR8
A new approach to randomly generate porous media to perform CFD simulations, J. L.
Ansoni, L. F. de Souza, A. Castelo (Universidade de São Paulo), A. Afonso (Faculdade de
Engenharia da Universidade do Porto)
0679 P-FLMR9 Heat transfer in a Taylor-couette flow, V. H. Chiumento, V. Malatesta (Universidade Federal
de Santa Catarina)
0707 P-FLMR10
Numerical analysis and experimental of temperature distribution of absorber plate a flat
plate solar collector, G. A. A. Moreira, Z. Silva (Universidade Federal da Paraíba), R. M. Valle,
A. L. Viana (Universidade Federal de Minas Gerais)
0788 P-FLMR11
Influence factors in the performance in a tracing of a friendly fish turbine hydraulic channel,
G. E. N. del Rio, R. G. R. Camacho, T. M. A. Angulo, W. de Oliveira (Universidade Federal de
Itajubá)
0812 P-FLMR12
Numerical analysis of the flow field in a helical-axial multiphase pump stage with splitter
blade in the diffuser, Y. F. Q. Gamboa, R. G. R. Camacho, W. de Oliveira (Universidade
Federal de Itajubá)
0877 P-FLMR13 Study of the influence of wind tunnel components geometries on laminar flow, M. Resende, J.
de A. Júnior, M. E. Silveira, B. Vargas (Universidade Federal de São João del Rei)
0911 P-FLMR14
Comparison between numerical CFD model and experimental evaporative condenser data, F.
Carrir, I. A. Júnior (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do
Sul), E. dos Santos, P. S. Schneider (Universidade Federal do Rio Grande do Sul), M. M.
Rebelato (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Sul)
88
POSTER SESSION (CONT.) – MON / 4
0937 P-FLMR15
Numerical solutions of eletroosmotic newtonian/non-newtonian fluid flows, W. de S. Bezerra
(Universidade de São Paulo), A. Afonso (Universidade do Porto, Portugal), A. Castelo
(Universidade de São Paulo)
0948 P-FLMR16 Numerical simulation of an ejector using the Openfoam® solvers, W. Novais, V. L. Scalon
(Universidade Estadual Paulista)
0955 P-FLMR17 Analysis of unsteady friction models for one-dimensional pipe flow at the light of the second
law of thermodynamics, J. S. G. Filho, F. B. de F. Rachid (Universidade Federal Fluminense)
1043 P-FLMR18 Stratification effects on turbulent open channel flows, R. Siqueira, M. de O. dos Santos, J. D.
Cussuol (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo)
1080 P-FLMR19 Numerical avaliation of airflow in naturally ventilated DSF, L. C. O. de Souza, H. A. Souza, E.
Rodrigues (Universidade Federal de Ouro Preto)
1131 P-FLMR20
Numerical study of fluid dynamic flow within an internal combustion engine cylinder, A. M.
Souza, A. C. V. de Oliveira, E. T. Ribeiro, F. Souza, M. C. Chiari (Universidade Federal de
Uberlândia)
1156 P-FLMR21 Non-isothermal fluid flow in a T-junction, A. D. Ferreira, S. R. de F. Neto (Universidade
Federal de Campina Grande)
1237 P-FLMR22 Optimization study on an ultra-low head bulb hydro turbine, A. C. B. Botan, R. G. R.
Camacho, G. Tiago Filho (Universidade Federal de Itajubá)
1320 P-FLMR23
Methodology for the numerical analysis of a fan/nozzle system using computational fluid
dynamics, R. Radtke, T.-D. Vecina, A. P. Petry, L. B. Kothe, J. L. Luz (Universidade Federal do
Rio Grande do Sul)
1414 P-FLMR24 Aerodynamic study in bluff body with a diffuser in ground effect assessed with fluid dynamics
tools, F. E. M. Colus (Universidade de Brasília), L. F. Paulinyi (Universidade de Brasília)
1445 P-FLMR25 Aerodynamic study of Fformula 1 wing in ground effect using computational fluid dynamics, I.
de Oliveira, L. F. Paulinyi (Universidade de Brasília)
MMEN - Materials and Manufacturing Engineering CODE Union and Assembly Processes
0724 P-MMEN1 Coating Welding With Cored Wire And Monitoring With Accelerometer, M. V. Silva, É. F. T.
Olivio, C. A. Correa (Universidade Tecnológica Federal do Paraná)
1488 P-MMEN2
Comparison Of Resistance Limits Of A Welded Joint Obtained In Tension Tests With Values
Calculated From The Literatur, R.l D. Dalagnol, R. Pereira, C. Luchezi, A. Esposito, A. J.
Bühler, G. G. Soares (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do
Sul)
2128 P-MMEN3 Development Of A Brushless Eletric Motor, A. C. dos S. Menezes, L. de C. Ferreira Neto, L. G.
D. Menezes Filho, J.Medeiros (Universidade Federal do Vale do São Francisco)
2786 P-MMEN4
Application Of The Processes Failures Models Efects Analysis Techniques (Pfmea) To The
Naval Pipe Assembly Process, M. Silva (Universidade Federal de Pernambuco), I. Lira
(Instituto Federal de Pernambuco), A. Siqueira, C. Gomes, E. Braga (Universidade Estácio de
Sá), J. E. B. da Costa (Centro Universitário Estácio do Recife), L. Pontes, M. R. Freire
(Universidade Estácio de Sá), V. Carvalho (Centro Universitário Estácio do Recife), W. A. de
L. Oliveira (Universidade Estácio de Sá), I. Carneiro (Faculdade Joaquim Nabuco), T. Barretto
(Universidade Federal da Bahia)
2891 P-MMEN5
Application of the processes failures models effects analysis technique (pfmea) to the naval
pipe manufactoring process, M. Silva (Universidade Federal de Pernambuco), I. Lira
(Instituto Federal de Pernambuco), A. Siqueira, C. Gomes, E. Braga (Universidade Estácio de
Sá), J. E. B. da Costa (Centro Universitário Estácio do Recife), L. Pontes, M. R. Freire
(Universidade Estácio de Sá), Venerando carvalho (Centro Universitário Estácio do Recife ),
W. A. de L. Oliveira (Universidade Estácio de Sá), I. Carneiro (Faculdade Joaquim Nabuco -
Recife), T. Barretto (Universidade Federal da Bahia)
5344 P-MMEN6
Analysis Of The Welding Parameters And Mechanical Properties In A Butt Joint Of Aa2198
T851 Alloy Laser Welded For Use In The Aircraft Industry, W. Nascimento, L. Moreira Filho, R.
Perez (Instituto Tecnológico de Aeronáutica), H. Izário Filho (Universidade de São Paulo)
CODE Project and Management
0034 P-MMEN7
Modeling And Measuring Of Competitiveness In Industrial Maintenance In Hospitals: Study
Of Multiple Cases With Multicriterial Analysis, G. Zucchetti, E. O. B. Nara, F. L. da Silva
(Universidade de Santa Cruz do Sul)
0479 P-MMEN8 Improvement Of Sawing Process With Hard Metal Blades For High Chromium Tubes, I.
Oliveira, M. Câmara (Universidade Federal de Minas Gerais)
0907 P-MMEN9 Development Of A Flexural Fatigue Device For Polymeric Samples Analisys, B. Vargas, J. de
Avila Jr., M. E. Silveira, M. Resende (Universidade Federal de São João del Rei)
89
POSTER SESSION (CONT.) – MON / 4
1026 P-MMEN10 Economic Viability Of Β Titanium Alloys For Application In Orthopedic Implants, R. C. Toledo,
M. B. de Oliveira, A. de O. F. Hayama (Universidade Federal de Mato Grosso)
1509 P-MMEN11
Fabrication Of Blades With Different Airfoil For A Small Wind Turbine, P. Celestino, S.
Queiroz, A. S. de A. Silva, I. de S. Queiroz Jr. (Universidade Federal Rural do Semi-Árido), I.
B. de Almeida (Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do
Norte)
2259 P-MMEN12
Design, Manufacturing And Testing Of A Low Cost Mechanical Raw Material Carrier For A
Recycling Plant, A. Delfim, G. M. de A. Carvalho, B. S. de Lima, R. M. de Oliveira, B. Murta
(Universidade Federal de Minas Gerais)
2573 P-MMEN13
Evaluation Of The Potentialities Of The Newly Developed Automatic Device For The Torsion
Welding Test Of Spot Weld, T. L. D. de Avila, A. Bracarense (Universidade Federal de Minas
Gerais)
2620 P-MMEN14 Air forced mechanism to improve motion on ultralights tires, A. Popiolek, M. H. da Silva, P.
Romio (Universidade do Vale do Itajai)
2709 P-MMEN15 Universal parameter language for the programming of numerical commanding machines, M.
A. da F. Gonçalves, M. Eckhardt, C. Scheuer (Universidade Federal de Santa Maria)
2721 P-MMEN16 Evaluation and development of restraint systems for children in emergency transport, A. F. P.
Tavares, A. C. F. de Arruda, V. C. de Souza, C. Quiroz (Universidade Estadual de Campinas)
2723 P-MMEN17 Design of planetary mill with friction wheels transmission, I. L. de Camargo (Escola de
Engenharia de São Carlos), J. Lovo, C. Fortulan (Universidade de São Paulo)
2829 P-MMEN18 Development of a preventive maintenance method applicable to small and medium
companies, R. A. M. Carrillo, A. B. de Abreu (Universidade Federal de Itajubá)
MECH - Mechatronics and Automation CODE Control Systems
0067 P-MECH1 Hybrid remotely operated vehicle (hrov) subjected to mimo sliding mode control, R. Cardoso,
M. E. M. Meza (Universidade Federal do ABC)
0252
Automation System Development For Multiprocess Welding Mechanism, I. M. Nunes, J. B.
Gonçalves, L. R. R. da Silva, D. R. S. da S. Araújo, G. Souza, A. C. B. Zancanella (Instituto
Federal de Educação Ciência e Tecnologia do Espirito Santo)
0404 P-MECH2 A Genetic Algorithm Based Clustering Applied To Multivariate Time Series, K. Ribeiro, C.
Fontes (Universidade Federal da Bahia)
1229 P-MECH3 Wind turbine control tuning with multi-objective optimisation techniques, G. R. Meza, A. F. da
Cruz, O. C. Junior (Pontifícia Universidade Católica do Paraná)
1317 P-MECH4
Controller Tuning Based On Optimization Metaheuristics Applied To A Twin-rotor System, L.
Coelho (Pontifícia Universidade Católica do Paraná), G. da Silva (Universidade Federal do
Paraná), A. L. Luppi, F. Betoni (Pontifícia Universidade Católica do Paraná), I. L. R. Silva
(Universidade Feredal do Paraná)
1442 P-MECH5 Identification of stabilization parameters of regional amazonian boats, F. J. A. Soares, Á.
Peres, C. Neves (Instituto Federal De Educação Ciência e Tecnologia do Amazonas)
1530 P-MECH6 Rainwater harvesting automatic system, D. A. Lemos, M. Araújo, A Pordeus (Universidade
Federal do Rio Grande do Norte)
1892 P-MECH7 Development of an oscillation control system test bench for riverboat, W. de B. Vidal Filho, J.
C. P. Passos, A. Pinto (Universidade de Brasília)
2505 P-MECH8
Displacement system in three cnc coordinates for welding table with activation by Arduino, K.
Rodrigues, K. Aquino, J. E. S. Lucas, W. Castro Filho, C. V. P. Costa Jr., R. Gonçalves, W. P.
Martins (Instituto Federal de Educação, Ciência e Tecnologia do Maranhão)
2521 P-MECH9
Determination of optimal parameters for pid controller based on the evaluation of the
transient response using genetic algorithm, C. I. R. Jaimes, E. Rodriguez, A. Alvares
(Universidade de Brasília)
2622 P-MECH10
Robust output feedback control of an electro-hydraulic actuator with uncertain parameters,
A. Zachi, C. A. Correia, J. Gouvêa (Centro Federal de Educação Tecnológica Celso Suckow
da Fonseca), W. M. Bessa (Universidade Federal do Rio Grande do Norte)
2701 P-MECH11 Modelling and controlling of an electric powered wheelchair using the control Lyapunov
Function, A. Jorge, L. A. Riascos (Universidade Federal do ABC)
2900 P-MECH12 Reconciliation Of Patterns In The Clustering Of Time Series, I. Silva, P. M. A. Aragão, C.
Fontes, R. M. Fontes, M. Embiruçu (Universidade Federal da Bahia)
90
POSTER SESSION (CONT.) – MON / 4
NMMS - Nano and Microfluidic and Micro-Systems CODE Nano and Microfluidic and Micro-Systems
0348 P-NMMS1
Experimental Analisys On The Thermal Performance Of Mwcnt/Water Nanofluids In A Car
Radiator, E. M. C. Contreras (Universidade Federal de Uberlândia), G. Oliveira (Universidade
Federal do Triângulo Mineiro), E. Bandarra Filho (Universidade Federal de Uberlândia)
0523 P-NMMS2 Flow Uniformization in Parallel Microchannel Heatsink, A. L. de Souza, A. Franco
(Universidade Tecnológica Federal do Paraná)
1276 P-NMMS3
Design, Fabrication and Test of W-DLC Thin-Film Resistors for MEMS Sensing Applications,
M. A. Fraga (Universidade Brasil), G. Leal (Universidade Federal de São Paulo), H. Furlan
(Centro Estadual de Educação Tecnológica Paula Souza), L. A. Rasia (Universidade Regional
do Noroeste do Estado do Rio Grande do Sul), L. Koberstein (Faculdade de Tecnologia de
São José dos Campos), M. Massi (Universidade Presbiteriana Mackenzie)
1664 P-NMMS4
Design and construction of a heat exchanger: use of nanofluids (gold nanoparticles in base
fluid), M. B. Fogaça, T. P. A. Ferreira, J. J. R.-Behainne (Universidade Tecnológica Federal do
Paraná), V. Lenart, S. L. Gomez (Universidade Estadual de Ponta Grossa), R. de F. Turchiello
(Universidade Tecnológica Federal do Paraná)
OSPE - Offshore and Petroleum Engineering CODE Offshore and Petroleum Engineering
0102 P-OSPE1
Pectin As A Biological Kinetic Inhibitor On The Nucleation Of Gas Hydrates, B. L. L. D. Silva, B.
Drumond, B. O. Fialho, J. A. Castro (Universidade Federal Fluminense), A. Teixeira
(Universidade Federal do Rio de Janeiro)
0369 P-OSPE2
Evaluation Of The Consequences Of Free Falling Loads In Polyester Yarns, E. Louzada, C. E.
M. Guilherme (Universidade Federal do Rio Grande), F. T. Stumpf (Universidade Federal do
Rio Grande do Sul)
0783 P-OSPE3
Effect Of Concentration, Stirring And Temperature On Corrosion By Naphthenic Acid In A335-
p5 Steels Using The Electrochemical Noise Technique, A. Baptista, A. C. Abrantes (Uninter), L.
H. S. da Silva, H. de A. Ponte (Universidade Federal do Paraná)
0820 P-OSPE4 Random Walk In Petrophysics, D. Silva, A. Zabot, D. N. Siebert (Universidade Federal de
Santa Catarina)
0888 P-OSPE5
Evaluation Of The Influence Of The Viscosifier On The Properties Of Synthetic Drilling Fluids J.
C. M. Mendonça, L. Amorim, R. C. A. M. Nascimento (Universidade Federal de Campina
Grande)
2004 P-OSPE6
Development Of An Apparatus For Producing Wax Deposition In Pipe Sections For Pigging
Tests, G. G. Demetrio, I. M. Pepe (Universidade Federal da Bahia), I. J. Rodowanski, L. C. S. Jr.
(Universidade Federal do Recôncavo da Bahia)
2708 P-OSPE7
Evaluation Of Modified Starches Used In Mining For Application In Drilling Fluids. K. Nóbrega,
S. Silva, L. Amorim, H. Lira (Universidade Federal de Campina Grande), J. Magalhães
(Company System Mud an Imdex Limited Company)
2734 P-OSPE8 Comparing Pressure Losses On The Reverse And Direct Circulation Systems, W. R. P. da
Costa, L. Amorim (Universidade Federal de Campina Grande)
2776 P-OSPE9
Study Of The Relationship Between The Mineralogical Composition And The Disintegration
Of Shales From Paraíba And Ceará States Of Brazil, M. N. C. Brunet, C. Leal, L. Amorim, F. C.
C. Nogueira, W. R. P. da Costa, H. Lira (Universidade Federal de Campina Grande)
5485 P-OSPE10
Obtaining Creep Curves For Polymer Materials Using The Stepped Isothermal Method. L.
Cofferri, C. E. M. Guilherme (Universidade Federal do Rio Grande), F. T. Stumpf
(Universidade Federal do Rio Grande do Sul)
PIPV - Piping and Pressure Vessels CODE Piping and Pressure Vessels
0841 P-PIPV1
Measuring, Materials Characterization And Numerical Simulation In Pressure Vessel With
Cylindrical Hull And Torispherical Lid. G. R. Melhorim, M. S. Lima Jr., A. Bahiense, C. E. G.
Ribeiro (Instituto Federal do Espírito Santo)
1583 P-PIPV2 Structural Analysis And Fatigue Life Calculation Of A Coke Drum. D. F. B. Lima, J. Pereira
(Universidade Federal do Paraná)
2403 P-PIPV3
Conception Of A Pressurized Electrochemical Cell For Corrosion Studies, C. Macêdo, G.
Baumann, V. F. S. N. M. da F. T. de S. Araújo, F. N. da Silva, J. T. N. de Medeiros
(Universidade Federal do Rio Grande do Norte)
91
POSTER SESSION (CONT.) – MON / 4
SOLM - Solid Mechanics CODE Structural Statics and Dynamics
0555 P-SOLM1
Mechanical evaluation of the welded union of a tie-rods for use in slope containment, A. C. B.
Zancanella (Universidade Federal do Espírito Santo), D. Z. de Camargo, L. R. R. da Silva, B.
C. Bragança (Instituto Federal de Educação Ciência e Tecnologia do Espirito Santo)
0608 P-SOLM2 Topological Optimization Applied To Design A Structural Component Of An Autonomous
Competition Robot, L. Figueiredo, J. de Avila Jr (Universidade Federal de São João del Rei)
0856 P-SOLM3 Modeling And Dynamic Analysis Of A Single-seat Off-road Vehicle’s Tubular Chassis, E.
Ataide (Instituto Federal de Pernambuco)
1122 P-SOLM4
High Strain-rate Behavior Of Fiber-reinforced Thermoplastic Composites Under Compressive
Loadings, C. R. Montes (Universidad Autónoma de Nuevo León), V. Reis, C. V. Opelt
(Instituto Tecnológico de Aeronáutica), R. Santiago (Universidade Federal do ABC), M.
Rezende (Universidade Federal de São Paulo), C. Gaona (Universidad Autónoma de Nuevo
León), M. Donadon (Instituto Tecnológico de Aeronáutica)
1314 P-SOLM5
Numerical Evaluation Of Hic In Formula Sae Vehicles With Different Types Of Impact
Attenuators, L. G. de Almeida, S. Cunha, M. E. Silveira (Universidade Federal de São João del
Rei)
2045 P-SOLM6
Numerical methods of phase shifting to stress measurement with digital photoelasticity using
plane polariscope. F. Vieira, J. S. R. Martins (Pontifícia Universidade Católica de Minas
Gerais), J. M. S. Ribeiro (Centro Federal de Educação Tecnológica de Minas Gerais), M. V.
dos S. Rocha, P. A. A. Magalhães Jr. (Pontifícia Universidade Católica de Minas Gerais)
2056 P-SOLM7 Topology Optimization for Several Boundary Conditions in Statically Loaded Structures, L.
Dornelles, D. M. De Leon (Universidade Federal do Rio Grande do Sul)
2230 P-SOLM8 Experimental Characterization of the Mechanical Properties of a 3D printed test body with
internal structures. G. Barbosa, J. de Avila Jr (Universidade Federal de São João del Rei)
2334 P-SOLM9
Analysis of the influence of the cross-sectional geometry of reinforcing fibers on the effective
properties of transversely isotropic materials. M.Madrid, R. Marczak (Universidade Federal do
Rio Grande do Sul)
2500 P-SOLM10 Evaluation of the WEB platform as a learning tool in Mechanical Engineering. F.P. Maia, N. M.
da F. T. de S. Araújo, C. M. Lima (Universidade Federal do Rio Grande do Norte)
2612 P-SOLM11 Study of roughness in a Tesla turbine. L. Souza (UNIP), G. Placco (Instituto Tecnologico de
Aeronáutica), L. Mariano, R. Paceli, A. C. A. Jr, R. Oliveira, L. G. de M. Paracêncio (UNIP)
2807 P-SOLM12
Numerical Procedure Based On Finite Elements Method And Theory Of Cosserat Rods For
Structures Subjected To Static Loads. R. G. Baptista, T. Silvestre, M. H. Takahama, A. Borges
(Universidade Tecnológica Federal do Paraná)
2901 P-SOLM13
Evolutionary structural optimization for natural frequency maximization of structures with
cyclic periodicity. A. V. G. Campos, R. Pavanello, W. Vicente (Universidade Estadual de
Campinas)
POSTER SESSION TUE / 5
AERO – Aerospace Engineering CODE Aerospace Structures
2074 P-AERO12 Conceptual design of UAV flying wing for construction in 3D printer, B. O. Lopes, W. F.
Amorim Jr (Universidade Federal de Campina Grande)
2859 P-AERO13 Prediction of the crack pattern in ceramic composites subjected to thermal loadings using
lattice models. H. Zanardi, I. Zago, R. A. Angélico (Universidade de São Paulo)
2882 P-AERO14 Design of one strand burner combustion chamber for tests of solid propellants to low power
rockets. A. P. Rodrigues, T. Araujo (Universidade Federal do ABC)
CODE Control Systems and Aeroelasticity
0900 P-AERO15 A case study of a LQG/LTR controller applied to UAV: a practical approach. P. R. Ferreira, N.
M. F. Oliveira (Instituto Tecnológico de Aeronáutica)
1405 P-AERO16 Development of a vertical static test bench for amateur rocket engines. D. Moraes F.
Telöken, M. Poletto, T. C. Severo (Universidade de Caxias do Sul)
2014 P-AERO17
Application of classical and modern techniques in attitude control of a satellite mockup. L. B.
D. E. Rosa, A. F. Coelho (Instituto Federal de Educação, Ciência e Tecnologia Fluminense),
R. Santos (Instituto Tecnológico de Aeronáutica)
92
POSTER SESSION (CONT.) – TUE / 5
2752 P-AERO18 Attitude determination for a Brazilian cubesat mission using the Kalman filter. K. M. dos
Santos, F. Coelho, A. L. da Silva (Universidade Federal de Santa Maria)
2888 P-AERO19
Hardware and software in the loop for V&V of real-time embedded software in aerospace
applications. S. Mirachi (EMBRAER), E. Villani, G. Correa (Instituto Tecnológico de
Aeronáutica), H. E. Fernandes (Universidade Estadual de Campinas), R. de Souza
(EMBRAER), G. M. Maiolino (Instituto Tecnológico de Aeronáutica)
CODE Flight Dynamics
0208 P-AERO20
The influence of the Reynolds number on the linear instability of laminar separation bubbles
in the absence of environmental disturbances. E. M. Gennaro, B. D. P. de Souza
(Universidade Estadual Paulista Julio de Mesquita Filho), D. Rodriguez (Universidade
Federal Fluminense)
0377 P-AERO21 Earth-moon trajectories based on variational equation for Jacobi integral. L. A. Gagg Filho, S.
da S. Fernandes (Instituto Tecnológico de Aeronáutica)
0378 P-AERO22
Optimal two-impulse trajectories for earth-moon flight in the elliptic restricted three-body
problem. S. da S. Fernandes, M. Macêdo, L. A. Gagg Filho (Instituto Tecnológico de
Aeronáutica)
BIOE – Bioengineering CODE Biomechanics
0029 P-BIOE19
Tendency of tooth movement produced by different cross-sections of a T-loop orthodontic
spring: an analysis by the finite element method. F. R. M. Rodrigues, P. C. Borges, M. A.
Luersen (Universidade Tecnológica Federal do Paraná), M. A. Ferreira (Private practice,
DDS, PhD)
0053 P-BIOE20
Analysis of vibration in urban train commuters in Porto Alegre and metropolitan region
concerning comfort and health. M. Fedatto Neto, H. Gomes (Universidade Federal do Rio
Grande do Sul)
0311 P-BIOE21
Transient thermal analysis of a MR clutch for knee prostheses and exoskeletons. R. Andrade
(Universidade Federal de Minas Gerais), L. de A. Paulo (Universidade Federal do Espírito
Santo), A. Bento Filho (Universidade Federal do Espírito Santo), C. Vimieiro (Universidade
Federal de Minas Gerais)
0313 P-BIOE22
Test bench to experimental modeling of an magneto-rheological actuator for knee
prostheses and exoskeletons. R. Andrade (Universidade Federal de Minas Gerais), I. B. Vieira
(Universidade Federal do Espírito Santo), G. Fontoura (Universidade Federal do Espírito
Santo), A. Bento Filho (Universidade Federal do Espírito Santo), C. Vimieiro (Universidade
Federal de Minas Gerais)
0661 P-BIOE23 A continuous passive motion aquatic device. R. S. Gonçalves, I. de P. C. Borges, J. Carvalho
(Universidade Federal de Uberlândia)
0814 P-BIOE24
Bayesian approach to parameter estimation and selection of growth models of tumor cells.
A. da Mata (Universidade Federal do Espírito Santo), J. M. J. da Costa (Universidade Federal
do Amazonas), W. B. da Silva, J. C. S. Dutra (Universidade Federal do Espírito Santo)
0949 P-BIOE25
Modeling in finite elements of the temporomandibular joint. S. Del Vecchio, R. M. M.
Vasconcellos, (Instituto Federal do Sudeste de Minas - Campus Juiz de Fora), F. Bastos
(Universidade Federal de Juiz de Fora )
1129 P-BIOE26
Development and experimental validation of a three-dimensional model in finite elements
for stress analysis in an endodontic instrument. C. Mesquita Neto, J. C. M. Fernandes
(Universidade Estadual Paulista - Faculdade de Engenharia de Bauru), R. Midena, M.
Alcalde, R. Vivan (Universidade de São Paulo), E. C. Sousa (Universidade Estadual Paulista -
Faculdade de Engenharia de Bauru)
1209 P-BIOE27 Measuring in skin expansion apparatus. R. C. Pizzaia, G. Sampaio, H. I. Weber, D. Pamplona
(Pontifícia Universidade Católica do Rio de Janeiro)
1214 P-BIOE28
Analyzing motor primitives of healthy subjects wearing a lower limb exoskeleton. P. F.
Nunes, W. dos Santos (Universidade de São Paulo), S. Lourenco (Universidade Federal de
São Carlos), A. Siqueira (Universidade de São Paulo)
1682 P-BIOE29 An analysis of deformation in an arteriovenous fistula model. J. F. Rangel, K. Bessa, W. B. de
A. Santos, S. Souza, V. B. Fernandes (Universidade Federal do Rio Grande do Norte)
1878 P-BIOE30
An analytical approach for the prediction of the profile of forces of a manual wheelchair
propulsion. D. Novais, M. Souza, C. Araújo, M. Guimarães, D. Augusto (Universidade
Federal de Uberlândia)
1969 P-BIOE31
Study of the mechanical properties of anti-fatigue mats. F. F. D. e Silva (Instituto Federal de
Minas Gerais - Ouro Branco), E. A. Schirmer, M. Marcal, F. Maynart, L. A. G. Torres
(Universidade Federal dos Vales do Jequitinhonha e Mucuri)
93
POSTER SESSION (CONT.) – TUE / 5
1994 P-BIOE32 Cranial deformation applying finite element analysis (FEA). L. Pereira, C. Araújo, T. G.
Cardoso, J. Borges (Universidade Federal de Uberlândia)
2002 P-BIOE33 Evaluation of power transmission in cycling for transtibial amputees. K. A. Fernandes, C.
Araújo, F. L. de Souza (Universidade Federal de Uberlândia)
2198 P-BIOE34
Analysis of transfer of forces in the articulations of the lower members during the human
gait. J. S. R. Martins, F. Vieira (Pontifícia Universidade Católica de Minas Gerais), C. Vimieiro
(Universidade Federal de Minas Gerais), J. M. S. Ribeiro (Centro Federal de Educação
Tecnológica de Minas Gerais
2268 P-BIOE35
Development of an ergometric prototype to assist in physical activities of people with
paraplegia in order to combat obesity and cardiorespiratory diseases. M. da S. Serejo, K.
Martins, G. H. S. Oliveira, E. Martins, C. V. P. Costa Junior, K. Barbosa, A. S. de Alencar
(Instituto Federal de Educação, Ciência e Tecnologia do Maranhão)
2392 P-BIOE36
Development of a versatile tactile measurement system for the mapping of individual
footprints. W. Domingos, I. Brito, I. Capanema, M. Sesselmann (Universidade Federal de
Minas Gerais)
5264 P-BIOE37
Electromechanic upper limb dynamic orthosis for rehabilitation of hand and elbow. M. V. F.
de Andrade, F. Ferreira (Universidade Federal de Minas Gerais), S. De-Stefano (Pontifícia
Universidade Católica de Minas Gerais), A. M. V. N. Van Petten (Universidade Federal de
Minas Gerais), D. N. Rocha (Instituto Federal de Minas Gerais), C. Vimieiro (Universidade
Federal de Minas Gerais)
5720 P-BIOE38
Stereoscopic fringe projection system for human tooth arcade measurement. S. Del Vecchio
(Instituto Federal do Sudeste de Minas - Campus Juiz de Fora), M. Sesselmann, M.arcos
Pinotti (Universidade Federal de Minas Gerais)
5901 P-BIOE39 Comparison between atrial fibrillation detection algorithms based on rr intervals. M. F. de
Paulo, E. Bock (Instituto Federal de Educação, Ciência e Tecnologia de São Paulo)
5940 P-BIOE40 Computational simulation to compare two racing wheelchair models using finite element
method, T. Donegá, C. Araújo (Universidade Federal de Uberlândia)
COMB – Combustion and Environmental Engineering CODE Chemical Kinetics and Modeling
1976 P-COMB15 Numerical CFD evaluation of a flameless burner using detailed chemical kinetics. T. Donegá,
C. Araújo (Universidade Federal de Uberlândia)
5813 P-COMB16
Analysis of moisture adsorption isotherms for roasted and raw biomasses. M. Peniche, F.
Neto, L. Batistella (Universidade Federal do Pará), R. Gonçalves (Instituto Tecnológico de
Aeronáutica), M. Nogueira (Universidade Federal do Pará)
CODE Combustion, Pirolisis and Gasification of Solids and Liquids
0299 P-COMB17
2D-rayleigh scattering thermometry in post-flame: polarization strategy. D. J. de Oliveira, G.
B. Antunes, M. E. Sbampato, L. G. Barreta, L. R. dos Santos, C. A. Martins (Instituto
Tecnológico de Aeronáutica)
0373 P-COMB18 Construction a bench co-current bed model gasifier suitable for the local biomasses. M. A. A.
Leite, L. G. R. Lioba, J. Duarte (Universidade de Fortaleza)
0436 P-COMB19
Optimization of the synthesis gas modeling obtained from a fluidized bed gasifier using the
Kuhn-Tucker multipliers. J. A. Gutierrez, I. Ávila, A. Mendiburu (Universidade Estadual
Paulista Julio de Mesquita Filho)
0860 P-COMB20 Simulation of in-situ combustion process in laboratory scale. L. H. P. Deoclecio, Filipe A. F.
Monhol, A. P. Meneguelo (Universidade Federal do Espírito Santo)
0872 P-COMB21
Coconut shell gasification numerical modeling in a downdraft reactor. C. L. Vago, M. Abreu,
F. A. F. Monhol, C. E. S. Abreu , L. R. R. da Silva (Instituto Federal de Educação Ciência e
Tecnologia do Espirito Santo)
0903 P-COMB22
Design of a reactor for the analysis of combustion in a reactive porous medium. L. H. P.
Deoclecio, F. A. F. Monhol (Instituto Federal de Educação Ciência e Tecnologia do Espirito
Santo), D. Ribeiro (Universidade Federal do Espírito Santo)
1074 P-COMB23
Spray-flamelet approach by means of a monotonic cumulative mixture fraction variable. D.
Maionchi (Universidade Federal de Mato Grosso), F. Santos (Universidade Federal do Rio
de Janeiro), J. Melguizo-Gavilanes (California Institute of Technology)
1437 P-COMB24
Experimental parameters from fluid dynamics and natural gas combustion in fluidized bed
reactor. J. D. M. Feitosa, W. Barcellos, T. Pires, W. C. Araújo, L. R. da Costa , T. M. Dantas, F.
E. P. Cardoso, K. Ribeiro, M. C. D'Amico, J. W. C. de Araújo (Universidade Federal do Ceará)
1547 P-COMB25 Size effect of wooden pieces on the performance of a biomass gasifier. F. de S. Silva, A. S.
Rumão, H. T. Macau, W. Galdino, A. F. Alves, E. Jaguaribe (Universidade Federal da Paraíba)
94
POSTER SESSION (CONT.) – TUE / 5
1624 P-COMB26
Thermodynamic evaluation of process to obtain charcoal from the slow pyrolysis of Babassu
coconut. F. E. T. de Luna (Universidade Federal da Paraíba), L. Guedes (Instituto Federal do
Ceará), H. T. Macau, R. J. F. Macedo (Universidade Federal da Paraíba)
1732 P-COMB27
Behavior analysis of ozone addition to an ethanol/O2 reactive flow simulation. G. S. Q. de
Oliveira, G. Stieven, L. Costa (Universidade Federal do Pará), R. Gonçalves (Instituto
Tecnológico de Aeronáutica)
2258 P-COMB28 A study of biochar yield from the slow pyrolysis of rice husk. F. R. Vieira (Universidade
Estadual Paulista Julio de Mesquita Filho)
2564 P-COMB29
Upgrading residual biomass by HHV increases in torrefaction. R. L. da Silva (Universidade
Federal da Grande Dourados), C. S. Michels, P. S. Schneider (Universidade Federal do Rio
Grande do Sul), S. Soares (Universidade Federal de Mato Grosso)
DYNM – Dynamics, Control, Vibrations and Acoustics CODE Control
0161 P-DYNM8 Modeling and construction of a magnetic levitator applied in an academic environment. C.
Pedra, M. E. M. Meza (Universidade Federal do ABC)
0740 P-DYNM9
Multimodal vibration control using dynamic neutralizers in rotating machines. D. R. Voltolini
(WEG Equipamentos Elétricos), S. Kluthcovsky (Universidade Federal do Paraná), E. M. de
O. Lopes, C. A. Bavastri (Universidade Federal do Paraná)
0965 P-DYNM10
Nonlinear modeling, simulation and control of a two-wheeled inverted pendulum. G. D.
Silva, B. L. Pereira, A. Sousa, L. Sanches, J. J. P. Z. de S. Tavares, R. HIROSHI Murofushi, R.
Cardoso (Universidade Federal de Uberlândia)
1531 P-DYNM11
Using multi-objective optimization design for driven pendulum system control. A. R. Santos,
G. H. B. Andrade (Universidade Federal do Paraná), G. R. Meza, L. Coelho (Pontifícia
Universidade Católica do Paraná)
1998 P-DYNM12
PID temperature control algorithm design, implementation and test for coffee dryers with air
flow mixing automation system. B. Murta, A. Delfim, L. C. B. de Sá, E. Lima II, T. Souza
(Universidade Federal de Minas Gerais)
2851 P-DYNM13 Bio-inspired optimation applied to the tuning of model predictive control parameters. E.
Mesquita, C. H. Llanos, R. Sampaio (Universidade de Brasília)
2860 P-DYNM14 On line monitoring of bearing faults by fuzzy logic. R. Pereira, J. D. Nolasco, V. A. D. Silva, J.
N. Brito (Universidade Federal de São João del Rei)
CODE Dynamics
1630 P-DYNM15
Vibration analysis during the operation of a tractor with agricultural implements. A.
Boaventura, V. Schutzer, M. Quartaroli, S. Leite, B. R. de Pontes Jr, J. E. Santos
(Universidade Estadual Paulista - Faculdade de Engenharia de Bauru)
2343 P-DYNM16
Reduction of the dynamic response of transmission towers through the insertion of
viscoelastic material. P. Freisleben, W. D. Ukasinski (Universidade Positivo), F. Silva
(Universidade Federal do Paraná)
2621 P-DYNM17
Evaluation of occupational noise in welders during different welding processes. W. Santos
(Universidade Federal de Santa Catarina), C. Lima (Universidade Federal do Pará), M.
Veloso (Universidade Federal de Santa Catarina)
ENTS – Energy and Thermal Sciences CODE Numerical Heat Transfer
0001 P-ENTS20
Methodology for thermal simulation of electronic devices. R. R. Sousa (Universidade Federal
da Grande Dourados), A. T. Paschoalini (Universidade Estadual Paulista Julio de Mesquita
Filho)
0315 P-ENTS21
Numerical analysis through CFD of the free convection in a vertical flat plate. W. Fonseca
(Faculdade Pitágoras), L. Filho (Universidade Estadual do Maranhão), S. Nascimento
(Instituto Federal de Educação, Ciência e Tecnologia do Maranhão)
0602 P-ENTS22
Numerical analysis of heat transfer in a breast considering two cancer types. A. Figueiredo, J.
Gomes, L. H. da S. Ignacio, F. Malheiros, G. Guimaraes (Universidade Federal de
Uberlândia)
0835 P-ENTS23
Thermal analysis with experimental validation of power transformers. A. R. M. de Sousa, W.
da S. Fonseca, M. V. A. Nunes (Universidade Federal do Pará), D. de S. Lima (Universidade
do Sul e Sudeste do Pará), F. W. S. Conceição (Centrais Elétricas do Norte do Brasil)
1065 P-ENTS24
Experimental and computational simulation of a concentric tubes heat exchanger: thermal
effectiveness and numeric model micro fins addition analysis, B. G. Barbosa, E. L. Tolentino,
J. Z. Pochmann, F. R. S. Lima (Centro Federal de Educação Tecnológica de Minas Gerais)
95
POSTER SESSION (CONT.) – TUE / 5
1194 P-ENTS25 Determination of the heat transfer rate and friction coefficient in cross-flow forced
convection, L. C. Martinez, F. P. Disconzi, J. V. C. Vargas (Universidade Federal do Paraná)
1448 P-ENTS26
An investigation about the use of a constant absorption cross-section for radiative heat
transfer computations in non-uniform CO2 gases, G. de L. Bernardino, A. Maurente
(Universidade Federal do Rio Grande do Norte)
1493 P-ENTS27
Numerical evaluation of an enhanced transparent insulation system on a glass-plate cavity,
R. P. Garcia, G. Gonçalves, V. L. Scalon (Universidade Estadual Paulista - Faculdade de
Engenharia de Bauru)
1768 P-ENTS28 CFD analysis of an earth-pipe-air heat exchanger, D. P. Vasconcellos, G. Santos, M. N.
Stamoulis (Universidade Tecnológica Federal do Paraná)
1905 P-ENTS29 Numerical efficiency of the GMRES algorithm in heat transfer problems, P. G. Conci, F. A. A.
Gomes (Universidade Tecnológica Federal do Paraná)
2093 P-ENTS30 Numerical analysis of natural convection heat transfer on air-cooled finned tubes, R.
Nascimento, S. Souza (Universidade Federal do Rio Grande do Norte)
2458 P-ENTS31 Absolute instability of mixed convection in a heated horizontal porous channel, N. R. Braga
Jr, P. V. Brandão, L. A. Sphaier, L. S. de B. Alves (Universidade Federal Fluminense)
2568 P-ENTS32
Estimation of the thermal conductance at the contact interface of a laminated composite
with the unscented Kalman filter, L. Florindo (Universidade Federal do Espírito Santo), L.
Abreu, D. Knupp (Universidade Estadual do Rio de Janeiro), J. C. S. Dutra, W. B. da Silva
(Universidade Federal do Espírito Santo)
2657 P-ENTS33 Simulation of casting process of marine propellers, H. Santana, E. Lins (Universidade Federal
do Pará)
2766 P-ENTS34
Analysis of the thermal properties of the sodium and potassium nitrate as heat exchanger in
a heliothermic power plant, F. Goes, E. Santos, W. Felix (Universidade Tiradentes), W.
Nascimento (Instituto Tecnológico de Aeronáutica), A. Primo (Universidade Tiradentes)
2928 P-ENTS35
Radiation calculations on fluent CFD: three approaches for the weighted-sum-of-gray-gases
model, L. G. P. Rodrigues, A. Ziemniczak, F. França (Universidade Federal do Rio Grande do
Sul)
FLMR - Fluid Mechanics and Rheology CODE Computational Fluid Dynamics
1132 P-FLMR26 Numerical analysis of the air flow in intake manifolds of internal combustion engines, A. M.
Souza, H. S. Souza, T. B. da Silva, K. Nabbout (Universidade Federal de Uberlândia)
1479 P-FLMR27
Influence of electrode flow channel changes on the efficiency of polymer electrolyte fuel cell,
T. Moreno, R. P. da Silva, M. Laviola (Universidade Federal Fluminense), C. F. Campos
(Centro Universitário de Volta Redonda), F. J. B. Brum (Universidade Federal Fluminense)
1550 P-FLMR28
Influence of the modification of anode a PEM type fuel cell, R. P. da Silva, T. Moreno
(Universidade Federal Fluminense), C. F. Campos (Centro Universitário de Volta Redonda),
F. J. B. Brum (Universidade Federal Fluminense)
1519 P-FLMR29 Numerical simulation of pollutant dispersion in the atmosphere, L. M. D. Okamoto, G.
Naozuka, N. Romeiro, E. Cirilo, P. L. Natti (Universidade estadual de Londrina)
1545 P-FLMR30 A hyperbolic - regularized Casson model for pulsatile blood flow simulation in a rigid artery,
F. Martelli, P. Silva, E. Macêdo (Universidade Federal do Pará)
1731 P-FLMR31 Numerical simulation of the two-dimensional incompressible flow around elliptic cylinders
using the vortex method, R. Pereira (Centro de Pesquisas de Energia Elétrica)
1739 P-FLMR32 Computational study of the wind flow in diffuser augmented, R. S. Pereira, S. Santos, F. C. L.
de Sousa, K. P. M. de Oliveira (Universidade Federal de Mato Grosso)
1752 P-FLMR33 Experimental and numerical analysis of underexpanded jet, D. Jorge , M. M. Vieira, T.
Moraes, D. Maionchi, E. Silva, R. L. da Silva (Universidade Federal da Grande Dourados)
1812 P-FLMR34 Numerical analysis of enthalpy of a compressible flow over a flat plate, R. M. Ramoni, M.
Lourenço (Universidade Tecnológica Federal do Paraná)
1832 P-FLMR35
Non-orthogonal components analysis of the permeability tensor in RTM reinforced medium,
C. Oliveira, C. M. B. Dutra, L. L. Soares, J. A. Souza (Universidade Federal do Rio Grande -
FURG), S. Amico (Universidade Federal do Rio Grande do Sul)
1907 P-FLMR36 Computational study of the wind flow in convergent-divergent nozzle, F. C. L. de Sousa, S.
Santos, R. S. Pereira , K. P. M. de Oliveira (Universidade Federal de Mato Grosso)
1955 P-FLMR37 Numerical and experimental analyses of heat transfer by natural convection on flat inclined
plates, J. G. G. de Oliveira, E. Cornils, T. Oliveira (Universidade de Brasília)
2137 P-FLMR38 Use of CFD tools for benchmarking of wind turbines design, A. Barros, F. A. F. Câmara, S.
Souza (Universidade Federal do Rio Grande do Norte)
96
POSTER SESSION (CONT.) – TUE / 5
2217 P-FLMR39 Computational analysis using CFD on performance of a centrifugal pump impeller, A. R. A.
Bezerra, S. Souza, A. B. B. Araujo (Universidade Federal do Rio Grande do Norte)
2243 P-FLMR40
Application of computational fluid dynamics (CFD) analyzing aerodynamic car models:
examples didactic, L. de L. Freire, A. K. C. de Araújo, M. Furukava (Universidade Federal
Rural do Semi-árido)
2253 P-FLMR41
Analysis of the high temperature effect in conical nozzle, B. C. Lima, J. F. de A. Martos
(Instituto Tecnológico de Aeronáutica), P. Toro, I. Rêgo (Instituto de Estudos Avançados), S.
N.P. Laitón (Instituto Tecnológico de Aeronáutica)
2283 P-FLMR42 Use of gamma theta model to determine the aerodynamic characteristics of NACA 23012
airfoil, A. Barros, F. A. F. Câmara, S. Souza (Universidade Federal do Rio Grande do Norte)
2350 P-FLMR43 Forced turbulent convection around ribbed spinning cylinders based on Magnus effect, P. M.
Guimarães, P. Silva, A. L. Torres (Universidade Federal de Itajubá)
2592 P-FLMR44
Numerical behavior of the discontinuous Galerkin method in incompressible fluid flow
simulations for low Reynolds number, F. J. da Silva, F. A. A. Gomes, P. R. Novak, A. Q. Garcia,
M. B. Hecke (Universidade Federal do Paraná)
2603 P-FLMR45 Analysis of the independence of the mesh refinement in a three-dimensional numerical
simulation of a vertical thermal tank, G. A. A. Moreira (Universidade Federal da Paraíba)
2605 P-FLMR46 Numerical and experimental analysis of the aerodynamic behavior of a road bus in a wind
tunnel, G. Rech, C. Altafini, C. A. Costa (Universidade de Caxias do Sul)
2680 P-FLMR47
Effects of the volute casing design on the characteristics of centrifugal pump, R. A. M.
Carrillo, C. E. C. Rodriguez, L. Queiroz, M. Fonseca, B. Mariano (Universidade Federal de
Itajubá)
2695 P-FLMR48
Exergy analysis of a low-grade geothermal source driven by an organic Rankine cycle (ORC),
C. E. C. Rodriguez, R. A. M. Carrillo, A. Rodriguez, D. Pereira, M. Monteiro (Universidade
Federal de Itajubá)
5224 P-FLMR49 Comparative study of bodywork car single seater based on CFD, B. O. Lopes (Universidade
Federal de Campina Grande)
CODE Multi-phase Flow
0040 P-FLMR50 Gas-solid flow in horizontal pipes with rough and smooth walls, D. N. Venturi, F. Souza
(Universidade Federal de Uberlândia)
0846 P-FLMR51 High-order immersed interface method for 2D poisson equation, M. Rojas , L. F. de Souza, J.
A. Cuminato (Universidade de São Paulo)
1073 P-FLMR52
Experimental validation by ultrasonic technique of the numerical analysis of an ascendant
flow under the influence of the centrifugal and gravitational fields, H. K. Eidt, C. C.
Rodrigues, R. Dunaiski, C. Y. Ofuchi, P. H. D. dos Santos, F. Neves-Jr, R. Morales
(Universidade Tecnológica Federal do Paraná)
1130 P-FLMR53
Analysis of pressure drop on boiling of propane in MPE tube, P. F. da Silva, J. de M. Patzlaff,
J. Copetti (Universidade do Vale do Rio dos Sinos), J. D. de Oliveira (Universidade Federal
de Santa Catarina)
1223 P-FLMR54
Mathematical modeling and experimental analysis for the elongated bubble shape in two-
phase slug flow, M. Weiland, C. Cozin , R. Rodrigues, M. G. Conte, F. A. Barbuto, R. Morales
(Universidade Tecnológica Federal do Paraná)
1591 P-FLMR55 Study of the pipe diameter effect on horizontal air-water two-phase flow, F. J. da Silva, G. G.
da Silva, S. Vieira, M. S. de Castro (Universidade Estadual de Campinas)
1679 P-FLMR56 Experimental set-up for lost circulation control in fractured channel by particulate flow, C.
Schneider, F. C. de Lai, S. Junqueira (Universidade Tecnológica Federal do Paraná)
1959 P-FLMR57
Application of an empirical model to identify stratified gas–liquid flow in the whole range of
pipe inclinations, G. Assuncao, J. C. H. Filho, D. Schiozer, M. S. de Castro (Universidade
Estadual de Campinas)
1971 P-FLMR58
Procedure for flow regime identification of dispersed bubbles in a gas-liquid mixture flowing
in vertical pipes, L. E. M. Lima, G. M. Assis, L. E. M. Lima (Universidade Tecnológica Federal
do Paraná)
1990 P-FLMR59 Conductive probe and image technique for the study of slug flow hydrodynamics, I. dos
Santos, A. Serrao, M. Silva (Universidade Federal do Pará)
2421 P-FLMR60 Uncertainty analysis of air-water flow in residential water meters, J. Souza , T. Amaral, M.
Silva, F. Silva, L. Braga, D. Felipe, A. Linhares (Universidade Federal do Pará)
2452 P-FLMR61
Development of a measurement and monitoring system of void fraction in slug flow, F. Silva,
I. dos Santos, A. Serrao, M. Silva, L. Braga, J. Souza, P. H. P. Silva (Universidade Federal do
Pará)
2563 P-FLMR62 The influence of geometry on the Young-Laplace method, A. Zabot (Universidade Federal de
Santa Catarina)
97
POSTER SESSION (CONT.) – TUE / 5
2728 P-FLMR63
Experimental study of a binary mixture of sugarcane bagasse and sand on a bubbling
fluidized bed, F. M. P. Balestieri, I. Ávila, C. M. R. Luna (Universidade Estadual Paulista), G. L.
A. A. Ferrufino (Instituto Nacional de Pesquisas Espaciais)
2838 P-FLMR64 Analysis of fluid dynamics behavior in response to thrust runner geometry in vertical sleeve
bearing, T. Casanova, G. C. Storti, L. Schemmer (WEG Equipamentos Elétricos S.A)
5950 P-FLMR65
Numerical simulation of particulate flow for static mud cake process over heterogeneous
porous media, G. H. de Lima, F. C. de Lai, S. Junqueira (Universidade Tecnológica Federal
do Paraná)
MMEN - Materials and Manufacturing Engineering CODE Metallurgical Processes
0929 P-MMEN19
Numerical simulation and analysis of the tools radius and different blank holder forces
influences on springback, P. S. O. Filho, A. Oliveira, É. F. T. Olivio (Universidade Tecnológica
Federal do Paraná)
1430 P-MMEN20 The feasibility to select a welding process based on cost-benefit analysis, D. H. de Almeida
(Centro Universitário Central Paulista), R. Vilela, L. Judice, G. Judice (Faculdade Pitágoras)
1779 P-MMEN21
Analysis of coating 410nimo deposited in the ca6nm steel process by welding coated
electrode, É. F. T. Olivio, C. de Nardi, A. Oliveira, M. Camargo, P. S. O. Filho (Universidade
Federal do Paraná)
1985 P-MMEN22 Evaluation of the surface finish generated in the turning of steel SAE 1020 using insert for
aluminum, M. de Oliveira, I. Tomaz, L. A. Júnior (Instituto Federal Fluminense)
2202 P-MMEN23
Comparative study between GMAW-CW and GMAW-EW processes with addition of a cold
energized wire, P. P. G. Ribeiro, J. R. dos Reis, M. Fonseca, C. Loayza, P. Assunção, A. A. C.
Filho, E. Braga (Universidade Federal do Pará)
2277 P-MMEN24 Lorentz force influence in GMAW with electric wire, P. P. G. Ribeiro, J. R. dos Reis, M.
Fonseca, C. Loayza, P. Assunção, E. Braga (Universidade Federal do Pará)
2311 P-MMEN25 Study of double pressure effect on cold sintering of ferrous chips, L. A. Salvalaggio, S. Soares,
L. Brandão, L. Resende, A. L. Bierhals (Universidade Federal de Mato Grosso)
2325 P-MMEN26 Study high pressure double effect in the densification of steel chips, A. L. Bierhals, L. Resende,
L. Brandão, L. A. Salvalaggio, S. Soares (Universidade Federal de Mato Grosso)
2373 P-MMEN27
Statistical analysis of sheet steel flatness after the insertion of centre buckles, F. J.
Kretzschmar (ArcelorMittal Vega), C. A. Carminatti, H. A. Al-Qureshi (Universidade Federal
de Santa Catarina)
2579 P-MMEN28 Quenching heat transfer process during nucleate boiling phase by CFD modeling, R. N.
Penha (Universidade Federal de Itajubá), L. Canale (Universidade de São Paulo)
2718 P-MMEN29
Comparative analysis of metallographic characteristics of a soldered ASTM A131 naval steel
board by the E7018 coated electrode with variation of the cable distance of the electrode, E.
M. Santos (Instituto Federal De Educação Ciência E Tecnologia Do Amazonas), A. C. F. de
Arruda, C. Quiroz, A. F. P. Tavares (Universidade Estadual de Campinas)
2768 P-MMEN30
Microstructural and oxidation study of silica-based coatings in Nb-Si-B alloys using the
HAPC process, N. Storino, J. Goes, M. Zambinat, G. Rodrigues, G. Silva, M. de L. N. M. Melo
(Universidade Federal de Itajubá)
2835 P-MMEN31 The influence of different aging on the hardness of the AA7075, L. Albergaria, G. Silva, G.
Rodrigues, J. Silva, J. V. Gomes, P. Ciacco, M. C. de Abreu (Universidade Federal de Itajubá)
2840 P-MMEN32
Duplex stainless steel production and study of stress relief treatment, C. S. P. Mendonça, B.
G. Andrade, F. Souza, L. Albergaria, C. S. P. Mendonça, A. F. Oliveira, V. Ribeiro, G. Silva
(Universidade Federal de Itajubá)
2846 P-MMEN33
Recycling of duplex steel through of powder metallurgy with isostatic press, M. Stanziola, C.
S. P. Mendonça, M. de L. N. M. Melo, G. Silva, B. G. Andrade, V. Oliveira (Universidade
Federal de Itajubá)
CODE Processes with Material Removal
0340 P-MMEN34 Vibration analysis of the 6351-T6 aluminum boring process, A. P. de Lara, M. Polli, M. Avelar
(Universidade Tecnológica Federal do Paraná)
0576 P-MMEN35
Quality of machining in the composite of banana stem fiber and polyurethane derived from
castor oil, A. Ellenberger, M. Polli (Universidade Tecnológica Federal do Paraná), E. Cristina
(Universidade Federal do Paraná), R. de O. dos Santos (Universidade Tecnológica Federal
do Paraná)
0648 P-MMEN36 The influence of cutting edge preparation on thrust force and torque in drilling of SAE
4144M, M. Polli, M. Santana (Universidade Tecnológica Federal do Paraná)
0742 P-MMEN37 Vibrations analysis in the ball-end milling process, F. F. da Silva (Instituto Federal do
Paraná), M. Polli, M. Avelar (Universidade Tecnológica Federal do Paraná)
98
POSTER SESSION (CONT.) – TUE / 5
1091 P-MMEN38
Analysis of the influence of water temperature, controlled by arduino, in a low cost compact
solar desalinizer, R. L. F. Melo (Instituto Federal de Educação, Ciência e Tecnologia do
Ceará), J. D. R. Junior (Universidade Federal Rural do Semi-Árido), S. Oliveira (Universidade
Federal do Rio Grande do Norte), J. F. Lima (Universidade Federal do Paraná), A. Oliveira
(Universidade Federal da Bahia), E. Silva (Universidade Federal Rural do Semi-árido)
1212 P-MMEN39 Influence of the infeed method on tool life and surface finish in austenitic stainless steel
thread machining, M. Polli, C. E. Costa (Universidade Tecnológica Federal do Paraná)
1319 P-MMEN40
Obtaining and characterizing a polyester resin compound with fiberglass and pet, A. C. B.
Zancanella (Universidade Federal do Espírito Santo), C. H. dos S. Cosme, J. Macete, M. dos
Santos, R. Fraislebem, R. Maziero, B. C. Bragança, A. P. de Barros, I. Belisario (Instituto
Federal de Educação Ciência e Tecnologia do Espirito Santo)
1501 P-MMEN41
Surface improvement of AISI H13 steel through the addition of silicon powder suspended in
dielectric during the process of electrical discharge machining, C. A. O. Luzia, F. L. Amorim,
C. A. H. Laurindo (Pontifícia Universidade Católica do Paraná)
1589 P-MMEN42
Evaluation of plunge cylindrical grinding of AISI 4340 steel under the application of the
minimum quantity lubrication coolant technique assisted with wheel cleaning system, E. C.
Bianchi (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru), R. L.
Rodriguez (Universidade Estadual Paulista Julio de Mesquita Filho), R. Hildebrandt, J. C.
Lopes, H. J. de Mello, P. Aguiar (Universidade Estadual Paulista - Faculdade de Engenharia
de Bauru)
1658 P-MMEN43
Study between down-milling and up-milling in ABNT 1020 steel surface finish, M. Almeida,
M. Câmara (Universidade Federal de Minas Gerais), D. H. do N. Viola, M. F. de S. Moreira
(Centro Universitário Newton Paiva)
1661 P-MMEN44
Production and characterization of sr2alzro5,5 ceramics to encapsulate temperature sensors
in the petroleum extraction industry, R. Domingues (Universidade Federal de Pernambuco),
A. Sousa (Instituto Federal de Pernambuco), M. B. Padilha, R. A. S. Ferreira, Y. P. Yadava, R.
Domingues (Universidade Federal de Pernambuco)
1683 P-MMEN45
Evaluating the grinding of AISI 4340 interrupted workpieces under abundant cooling method,
using a CBN grinding wheel, E. C. Bianchi, L. O. B. de S. Alves, G. E. Torrento, J. C. Lopes, R.
S. Volpato, H. J. de Mello, P. Aguiar (Universidade Estadual Paulista - Faculdade de
Engenharia de Bauru), R. L. Rodriguez (Universidade Estadual Paulista Julio de Mesquita
Filho), L. de M. Fernandes, B. Sato (Universidade Estadual Paulista - Faculdade de
Engenharia de Bauru)
2034 P-MMEN46
CAD/CAM software analysis: comparison, performance and application in a manufacturing
process, N. V. Le Sénéchal (Universidade Estácio de Sá), G. S. Rodrigues (Pontifícia
Universidade Católica do Rio de Janeiro)
2666 P-MMEN47
Use of finite element method to validate the temperature field of a 5-axis machining center,
M. Santos (Escola Politécnica da Universidade de São Paulo), E. C. Bordinassi (Centro
Universitário do Instituto Mauá de Tecnologia), G. Batalha (Escola Politécnica da
Universidade de São Paulo)
2679 P-MMEN48
Turning of hardened AISI 4340 steel using coated carbide tool, M. Alves (Universidade
Estadual Paulista Júlio de Mesquita Filho), J. Miguel (UNESP - Campus de Guaratinguetá),
M. Ribeiro, J. Souza, M. Kondo (Universidade Estadual Paulista Júlio de Mesquita Filho)
2717 P-MMEN49
Low-cost syringe pump design modification for minimum quantity of lubrication system
application, A. Nakazato, M. O. FIlho, M. Kondo, M. Alves, L. Hein (Universidade Estadual
Paulista Julio de Mesquita Filho)
2760 P-MMEN50 Circularity vs taper in micro-drilling with pulsed Nd:YAG, D. F. S. Junior (Instituto Federal de
Educação, Ciência e Tecnologia de Mato Grosso)
2804 P-MMEN51
Evaluation of surface roughness in low frequency vibration turning of ABNT-1020 carbon
steel, C. P. Lopes (Pontifícia Universidade Católica de Minas Gerais), A. N. D. Lopes, J.
Pereira, W. C. de Oliveira (Centro Federal de Educação Tecnológica de Minas Gerais)
2915 P-MMEN52
Application of the maskless electrochemical texturing method in the reduction of friction and
wear of the gray cast iron, L. R. R. da Silva, H. Costa (Universidade Federal do Rio Grande -
FURG)
5025 P-MMEN53 Torque analysis on rolled and machining threads processes, D. Rodrigues, F. O. Neves
(Universidade Federal de São João del Rei)
99
POSTER SESSION (CONT.) – TUE / 5
QUSM - Quantification of Uncertainty and Stochastic Modeling CODE Quantification of Uncertainty and Stochastic Modeling
0183 P-QUSM1 The interval eigenvalue problem for vibrating systems, F. S. de Oliveira (Universidade
Federal de Itajubá)
2313 P-QUSM2
A shear test measurement system analysis in a resistance spot welding using multivariate
GR&R, F. Almeida, R. C. Sabioni, V. de Paula, G. F. Gomes, J. H. de F. Gomes(Universidade
Federal de Itajubá)
2594 P-QUSM3
Wind shear evaluation in the “Brazilian developments on the regional atmospheric modeling
system” - BRAMS - compared to established references and to measured wind velocity data
at three heights in three locations, R. M. Dutra (Centro de Pesquisas de Energia Elétrica), A.
Neiva (Universidade Estadual de Campinas), V. Guedes (Centro de Pesquisas de Energia
Elétrica), A. A. M. Cabrera (Pontifícia Universidade Católica do Rio de Janeiro) .
SOLM - Solid Mechanics CODE Constitutive models
1040 P-SOLM14 Mathematic modelling of a shape memory alloy actuator, M. Orsi, G. Abreu (Universidade
Estadual Paulista Julio de Mesquita Filho)
2861 P-SOLM15
Mechanical behavior of elastomers under uniaxial tensile tests assisted by digital image
tracking, H. O. H. Natori (Universidade de São Paulo), K. Meira, C. C. de Melo, R. B. Canto
(Universidade Federal de São Carlos), R. A. Angélico (Universidade de São Paulo)
5280 P-SOLM16 Rubber bushing hyperelastic behavior based on shore hardness and uniaxial extension, D.
Lalo, M. Greco (Universidade Federal de Minas Gerais)
CODE Failure Criteria
1106 P-SOLM17
Preliminary studies in the computational modeling of a safety valve used in the offshore
industry, M. Silva (Centro Universitário UDF), L. L. D. Morales, A. Nepomuceno
(Universidade de Brasília)
1843 P-SOLM18
Vibration analysis for defective diagnosis in rotary machines,A. Carvalho (Universidade
Federal Rural do Semi-árido), R. L. F. Melo (Instituto Federal de Educação, Ciência e
Tecnologia do Ceará), J. D. R. Junior (Universidade Federal Rural do Semi-Árido), A.
Oliveira (Universidade Federal da Bahia), J. F. Lima (Universidade Federal do Paraná), E.
Silva (Universidade Federal Rural do Semi-árido), S. Oliveira (Universidade Federal do Rio
Grande do Norte)
100
POSTER SESSION WED / 6
AERO – Aerospace Engineering CODE Flight Dynamics
2013 P-AERO23
Modeling and frequency domain identification of a satellite mockup, A. F. Coelho, L. B. D. E.
Rosa (Instituto Federal de Educação, Ciência e Tecnologia Fluminense), R. Santos (Instituto
Tecnológico de Aeronáutica)
2175 P-AERO24 Nanosats’ behavior hardware in the loop simulator under earth’s low orbit magnetic field,
LEO, C. Cordeiro, J. E. M. Mothé (Instituto Federal de ciência e tecnologia Fluminense)
2703 P-AERO25
Modelling, simulation and control of a fixed-wing unmanned aerial vehicle (UAV), W. R. Silva
(Universidade Federal de Santa Maria), A. L. da Silva (Universidade Federal de Santa
Maria), H. Grundling (Universidade Federal de Santa Maria)
CODE Propulsion
1239 P-AERO26
Analysis and mathematical modeling of the electric thrust system of a quadcopter to obtain
flight performance criteria, F. B. Pacheco, R. Lago , D. R. R. Guilhon (Universidade Estadual
do Maranhão)
1627 P-AERO27
Evaluation of the effect of ozone addition on the methane/oxygen combustion in a lpre
using cfd analysis, F. Neto (Universidade Federal do Pará), R. Gonçalves (Instituto
Tecnológico de Aeronáutica)
2149 P-AERO28
Study of the aerodynamic heating of the stagnation point and the blunt section of brazilian
hypersonic aerospace vehicle 14-X S, A. M. P. Lara (Instituto Tecnológico de Aeronáutica), I.
Rêgo, P. Toro (Instituto de Estudos Avançados)
2484 P-AERO29
Utilization of an arduino® microcontroller for dynamic thrust measurement of a powertrain
assembly used in a sae aero design aircraft, G. Diniz, P. A. N. de Carvalho, M. B. de Moura,
G. Fin, P. B. N. da Silva, M. Duarte, Z. Vilar (Universidade Federal Rural do Semi-Árido)
2609 P-AERO30 Synthesis and evaluation of a tubular catalytic reactor for micropropulsion applications, G. E.
Coelho, C. Jr. Velho, R. de C. Catapan (Universidade Federal de Santa Catarina)
2683 P-AERO31
Optical design for laser propulsion system, B. Ferreira (Faculdade de Tecnologia de São José
dos Campos), P. Toro (Instituto de Estudos Avançados), F. da Costa (Instituto Tecnológico
de Aeronáutica)
COMB – Combustion and Environmental Engineering CODE Environmental Engineering
0461 P-COMB30
Development of an automated prototype for monitoring of microalgae cultivation in
photobioreactor, T. Francesconi, M. Rudek, O. Canciglieri Jr (Pontifícia Universidade Católica
do Paraná), B. Miyawaki, T. C. de Mello (Universidade Federal do Paraná)
0607 P-COMB31 Full factorial design applied to removal copper ions from soil, N. Kaminari, A. Baggio, L.
Munhoz (Pontifícia Universidade Católica do Paraná)
1111 P-COMB32 Analysis of CO2 generation in portland cement production, G. P. Tavares, R. J. Silva, M. D.
Ramos (Universidade Federal de Itajubá),
1340 P-COMB33
Activation time effect on activated carbon from coconut shell to enhance CO2 adsorption, W.
Galdino, J. Silva, D. Santos, A. F. Bezerra, A. S. Rumão, E. Jaguaribe (Universidade Federal
da Paraíba)
1451 P-COMB34
An OBD-II based vehicular data tracking system for fuel consumption and emissions
improvement, B. Murta, H. Guimarães, V. Silva(Universidade Federal de Minas Gerais), L. C.
Sales (Pontifícia Universidade Católica de Minas Gerais), A. Maia (Universidade Federal de
Minas Gerais)
1689 P-COMB35
Prototype units to address emerging contaminants and e. coli in wastewater via
photodynamic inactivation, P. S. Uliana Jr, M. P. de M. Fiuza, K. R. A. Vieira, R. de C. Cruz, B.
M. Soares, M. Sesselmann (Universidade Federal de Minas Gerais)
2788 P-COMB36
Effects of inertization process in confined spaces with apllication in the aeronautical industry,
E. S. R. Escalante (Universidade Estadual Paulista Julio de Mesquita Filho), C. J. R. Coronado
(Universidade Federal de Itajubá), E. V. Canettieri, J. Carvalho (Universidade Estadual
Paulista Julio de Mesquita Filho)
2909 P-COMB37
Socio-environmental advantages in wind microgenation, S. Queiroz, P. Celestino, I. de S.
Queiroz Jr (Universidade Federal Rural do Semi-Árido), I. B. de Almeida, C. A. de Oliveira
(Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte)
101
POSTER SESSION (CONT.) – WED / 6
DYNM – Dynamics, Control, Vibrations and Acoustics CODE Rotordynamics
0009 P-DYNM18 The problem in the simplified consideration of discs in the rotor dynamics of large machines,
L. Fonçatti, D. R. Voltolini (WEG Equipamentos Elétricos)
1326 P-DYNM19 The influence of the bearing angular stiffness in rotordynamics, T. da Silva, L. Bortolotto, F. J.
Doubrawa Filho, C. A. Bavastri (Universidade Federal do Paraná)
1903 P-DYNM20
Wind turbine faults monitoring by vibration analysis, P. Farias (Universidade Federal do Rio
de Janeiro), G. A. do P. Campos (Centro Federal de Educação Tecnológica Celso Suckow
da Fonseca), M. R. Farias (Universidade Estadual do Rio de Janeiro)
2408 P-DYNM21
Dynamic behavior of viscoelastic rotors – a comparative analysis, P. Farias (Universidade
Federal do Rio de Janeiro), G. A. do P. Campos (Centro Federal de Educação Tecnológica
Celso Suckow da Fonseca), M. R. Farias (Universidade Estadual do Rio de Janeiro)
CODE Structural dynamics
0564 P-DYNM22 Vibrational analysis of cracked Hooks, E. Janssen, E. Farinazzo (Universidade Positivo), M.
Oliveira Filho (Universidade Federal do Paraná)
0647 P-DYNM23
Unconventional numerical method to approach the free and forced vibration in
axisymmetric revolution shells, G. Dal Bó, O. A. G. de Suarez (Universidade de Caxias do
Sul), R. Rossi (Universidade Federal do Rio Grande do Sul)
0744 P-DYNM24
Vibration analysis of wind turbine bearing based on information theory quantifiers, V. Silva
(Universidade Federal de Pernambuco), G. de N. P. Leite (Instituto Federal de Educação,
Ciência e Tecnologia de Pernambuco), A. M. Araújo (Universidade Federal de
Pernambuco)
1123 P-DYNM25
Design and analysis by finite elements of a base for a reciprocating compressor, M. H.
Takahama, H. Rissá, H. Blaz (Universidade Tecnológica Federal do Paraná), F. T. Santos
(Universidade Federal de Santa Catarina), A. Borges (Universidade Tecnológica Federal do
Paraná)
1544 P-DYNM26 Experimental dynamic evaluation of cotton fiber composite material, F. Eloy, A. Ancelotti, A.
Ribeiro, B. Rennó (Universidade Federal de Itajubá)
1943 P-DYNM27 Study and Development of the vane for a new pneumatic motor-compressor, V. G. P. Siston,
G. A. do P. Campos (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca)
2192 P-DYNM28 Use of lamb waves to detect damage to metal beams, A. P. L. da Silva Jr, P. R. Novak
(Universidade Tecnológica Federal do Paraná)
2738 P-DYNM29 HVAC duct system modeling through the component mode synthesis for structural vibration
analysis, J. M. B. Ordoñez, M. Nunes (Universidade de Brasília)
2847 P-DYNM30
Efficiency optimization of freight wagon brake rigging, S. Ferreira, A. Gomes, P. Proença, F. J.
F. Lopes (Pontifícia Universidade Católica de Minas Gerais), C. Vimieiro (Universidade
Federal de Minas Gerais)
ENTS – Energy and Thermal Sciences CODE Biofuels and Alternative Energy
0099 P-ENTS36
Aerodynamic design analysis of a hybrid vertical wind turbine for decentralized power
generation, J. V. Akwa (Universidade Federal do ABC), C. E. G. Falcão (Universidade Federal
de Santa Maria)
0144 P-ENTS37
Experimental Analysis of a Small Engine-Generator Group Operating on Diesel-Ethanol by
Fumigation Method, G. D. Telli, C. Altafini (Universidade de Caxias do Sul), J. Rosa
(Universidade Federal do Rio Grande do Sul)
0152 P-ENTS38 Commercial central tower power plants: a brief review, G. I. M. Tapia, P. A. B. F. de Sousa
(Universidade Federal do Rio Grande do Norte)
0160 P-ENTS39
Performance Analysis and Economics of a Grid Connected PV System 2.2 kwp in State of
Ceara - Brazil, F. H. B. de L. Morais, L. C. de Lima, L. Ferreira, L. Dolibaina , R. E. B. de Souza
(Universidade Estadual do Ceará), Francisco Kleber de A. Lima (Universidade Federal do
Ceará)
0364 P-ENTS40
Analysis of Weibull parameters for wind power generation, L. I. de Andrade , O. D. Q. de
Oliveira Filho, A. M. Araújo, A. A. C. Silva, C. C. de A. Bezerra, E. C. R. Fernandes, E. J.
Fernandes, G. J. A. M. Rocha, W. F. A. Borges (Universidade Federal de Pernambuco), D. G.
Ribeiro (Universidade Federal de São Carlos)
0486 P-ENTS41 PV characterization using capacitive load, E. Peñaranda, P. Andrade, E. Bandarra Filho
(Universidade Federal de Uberlândia)
0614 P-ENTS42 Theoretical and experimental analysis of the squirrel-cage induction generator, M. Augusto,
T. C. B. N. Assunção, J. Andrade, J. T. Assunção (Universidade Federal de São João del Rei)
102
POSTER SESSION (CONT.) – WED / 6
0634 P-ENTS43
Photobioreactor inoculation with swine sewage for microalgae cultivation, G. Finger, J. G. B.
Martinez, Y. Kovara, A. Gonçalves, I. Costa, D. M. Taher, J. V. C. Vargas, A. Mariano
(Universidade Federal do Paraná)
0646 P-ENTS44
Combined solar-biomass steam generation for using in a poultry slaughterhouse system, T.
G. Almeida, E. Bazzo (Universidade Federal de Santa Catarina), K. Fagnani (C.Vale
Agroindustrial), E. Burin (Universidade Federal do Paraná)
0686 P-ENTS45 Exergetic analysis of a photovoltaic plate for various angulations for the climate of São Luís-
Ma, E. M. da S. Costa, R. S. Andrade, Lourival Filho (Universidade Estadual do Maranhão)
0785 P-ENTS46
Energetic analysis of a photovoltaic panel for different angles of inclination in the city of São
Luis-MA, Brazil, R. S. Andrade, E. M. da S. Costa, L. Filho (Universidade Estadual do
Maranhão)
0794 P-ENTS47 Financial impact on a cement plant in the coprocessing of meat and bone meal, R. Lima, R.
Carpio (Instituto Federal Minas Gerais )
0827 P-ENTS48 Analysis of the effect of the mat in aircraft on the production of power in Macao wind farm,
G. I. M. Tapia, F. Pontes (Universidade Federal do Rio Grande do Norte)
0834 P-ENTS49
5 MW and 2 MW NREL wind turbines simulation comparison for steady loading calculations,
A. A. C. Silva, C. L. dos Santos, S. Diogenes, A. M. Araújo, E. C. R. Fernandes, C. C. de A.
Bezerra, W. F. A. Borges, E. C. Calheiros, L. I. de Andrade (Universidade Federal de
Pernambuco), C. R. Ferreira (Universidade Estadual do Sudoeste da Bahia)
1135 P-ENTS50
Performance analysis of an internal combustion engine powered by gasoline and hydrogen,
A. M. Souza, P. C. R. da Cunha, P. de F. Martins, L. G. M. Vieira, J. A. F. Borges, J. J. R.
Damasceno (Universidade Federal de Uberlândia)
1138 P-ENTS51 Thermo-hydraulic calculation in CSP systems using the finite volume method, G. da S. Lima,
G. I. M. Tapia (Universidade Federal do Rio Grande do Norte)
1139 P-ENTS52 Heliostat field simulation in a solar tower power plant, M. P. de Lima, G. I. M. Tapia
(Universidade Federal do Rio Grande do Norte)
1196 P-ENTS53 Consumption study of diesel engine system using biodiesel, J. P. Gutierrez, R. Pereira, I. de
souza (Universidade Federal Fluminense)
1227 P-ENTS54 Analysis of parameters that influence the performance of heliostats in central tower
technology, G. I. M. Tapia, I. Medeiros (Universidade Federal do Rio Grande do Norte)
1231 P-ENTS55 Mathematical model for the thermal-hydraulic calculation in a fresnel linear reflector system,
G. I. M. Tapia, E. Cordeiro, G. I. M. Tapia (Universidade Federal do Rio Grande do Norte)
1403 P-ENTS56
Comparative study of different models for calculation of dni to application in CSP
technologies, G. I. M. Tapia, G. da S. Lima, A. de O. Souza (Universidade Federal do Rio
Grande do Norte)
1478 P-ENTS57
Review on market trends and syngas usability in fuel cells, Elise Watzko, Evandro Cardozo
da Silva (Universidade Federal de Santa Catarina), Lauber Martins (Andrews University),
Elaine Virmond, Guilherme Santos, Elise Watzko (Universidade Federal de Santa Catarina)
1541 P-ENTS58
Development of a fixed bed adsorption system that operates in PSA / TSA mode for
adsorption and production of purified hydrogen from the synthesis gas, I. S. Cruz, J. F. Alves,
F. N. A. Freire, W. Barcellos, W. C. Araújo (Universidade Federal do Ceará)
1960 P-ENTS59
Evaluation of biogas production from swine manure through continuous reactor, T. C. de
Mello, J. V. C. Vargas, W. Balmant, B. Miyawaki (Universidade Federal do Paraná), T.
Francesconi (Pontifícia Universidade Católica do Paraná)
2105 P-ENTS60
Advantages and economic feasibility of Stirling engines as a distributed generation source
and cogeneration technology – a brief review, Gabriel Ivan Medina Tapia, M. A. Delgado
Filho, N. M. da F. T. de S. Araújo, F. P. Maia (Universidade Federal do Rio Grande do Norte)
2194 P-ENTS61 A study on the use of agricultural residues plantain productions in Nicaragua for the
generation of electricity, C. A. B. Schutze (Universidade Estadual de Campinas)
2279 P-ENTS62
Hybrid electric power generator (photovoltaic – fuel generator) for remote areas, C. V. P.
Costa Jr, K. Martins, A. S. de Alencar, G. H. S. Oliveira, E. Martins, I. F. B. da Silva, K. Barbosa,
M. da S. Serejo (Instituto Federal de Educação, Ciência e Tecnologia do Maranhão)
2654 P-ENTS63 Development of an experimental BFT stand, F. C. B. D. Pantoja, Y. Nakamura (Universidade
Estácio de Sá)
2699 P-ENTS64
Lubricant lifespan of a Diesel engine fueled with preheated crambe oil, B. M. Bomfati
(Universidade Estadual de Ponta Grossa), H. C. Delalibera (Instituto Agronômico do Paraná
), L. R. Higashibara (Universidade Estadual de Londrina), P. H. W. Neto (Universidade
Estadual de Ponta Grossa)
2743 P-ENTS65
Solar cooker for food baking (solar grill), L. Souza, L. G. V. M. de Souza, M. A., K. Fontes
(Universidade Federal do Rio Grande do Norte), M. V. S. dos Santos (Universidade Federal
do Vale do São Francisco)
103
POSTER SESSION (CONT.) – WED / 6
2746 P-ENTS66
Study of low cost solar oven manufactured from a television packaging, L. Souza, L. G. V. M.
de Souza, M. Andrade, M. Oliveira, K. Fontes, M. V. S. dos Santos (Universidade Federal do
Vale do São Francisco)
2750 P-ENTS67
Manufacture and study of a water heating system using solar collector of absorbing grid
formed with pvc tubes in series-parallel configuration, L. Souza, E. Silva, L. G. V. M. de
Souza, W. Silva, K. Fontes (Universidade Federal do Rio Grande do Norte)
2753 P-ENTS68 Oven Solar for baking food manufactured with MDF, L. Souza, M. C. de O. Spinelli, L. G. V.
M. de Souza, A. G. Cavalcante, K. Fontes (Universidade Federal do Rio Grande do Norte)
2754 P-ENTS69
Manufacture and study of solar water heating system using an absorbing grid collector with
PVC tubes in the parallel configuration, L. Souza (Universidade Federal do Rio Grande do
Norte), A. Oliveira (Instituto Federal de Educação Ciência e Tecnologia do Rio Grande do
Norte - Campus Natal central), L. G. V. M. de Souza, A. G. Cavalcante, K. Fontes
(Universidade Federal do Rio Grande do Norte)
2831 P-ENTS70 FUEL CELL: Feasibility analysis of its application in automobiles, R. Gontijo, L. Marzano, A.
Rezende (Pontifícia Universidade Católica de Minas Gerais)
2862 P-ENTS71 A software for calculation of costs and operation of a small wind power plant, L. R. R.
Ribeiro, L. Sousa (Instituto Federal de Educação, Ciência e Tecnologia do Ceará)
FIVB - Flow Induced Vibration CODE Flow Induced Vibration
0844 P-FIVB1
Numerical and experimental analysis of the Influence of pipe fittings on the turbulence-
induced vibration, T. Bento, D. Lannes, R. M. Moreira, A. Gama (Universidade Federal
Fluminense)
FLMR - Fluid Mechanics and Rheology CODE Rheology and Non-Newtonian Fluid Mechanics
1548 P-FLMR66 Rheological Behavior of a chitosan/xanthan gum hydrogel, L. M. Dutra, A. Costa, E. E.
Garcia-Rojas (Universidade Federal Fluminense)
2406 P-FLMR67
Drag reduction with polymer addition in Taylor-Couette flow with Taylor instabilities, I. M.
da Silva, E. Soares (Universidade Federal do Espírito Santo), R. Siqueira, R. Andrade
(Universidade Federal de Minas Gerais)
CODE Theoretical and Analytical Modeling
1537 P-FLMR68
Pressure, Flow Rate and Head Loss Analysis on Multiple Parallel Flow Systems by
Computational Approach, J. L. L. Soares, G. S. Q. de Oliveira, M. L. S. Silva, S. Silva, G.
Stieven (Universidade Federal do Pará)
CODE Instrumentation and Experiments
0221 P-FLMR69 Design of a wind tunnel of the suckdown type for didactic tests, W. Fonseca, C. Oliveira, J. R.
Silva, E. Pinheiro, I. S. V. Arcos (Faculdade Pitágoras)
0408 P-FLMR70
Study and experimental analysis of hydraulic fluids compressibility with different viscosities,
F. R. de Souza, L. F. P. Scalabrin, M. N. E. Reis (Pontifícia Universidade Católica de Minas
Gerais)
0524 P-FLMR71
Development of a low cost pyranometer for solar radiation measurements, M. Ito, V. L.
Scalon, E. Avallone, C. Pansanato (Universidade Estadual Paulista - Faculdade de
Engenharia de Bauru)
0650 P-FLMR72
Analytical solution of the diffusion equation applied to the drying of ceramic tiles, L. F.
Araújo, V. S. O. Farias, W. P. da Silva, C. M. R. Franco, H. B. de Azevedo, A. F. da S. Junior
(Universidade Federal de Campina Grande)
0671 P-FLMR73
Canal prototype for teaching and research in fluid dynamics using fluoresceine, water and
alcohol solution as a working fluid wth phenolftaleine and ammonia solution for
visualization with black light, J. S. G. de Moura, M. da G. Braz, D. Moiseyev, D. Lobato
Bernardes, G. Faria, J. S. G. de Moura, M. T. C. Caldeira (Universidade Fumec)
0764 P-FLMR74
Numerical and experimental analysis for performance improvement of the admission
restrictor for a formula-sae vehicle, A. Rocha, E. da . Marcelino, L. Correia, R. Duarte
(Universidade Federal de Campina Grande)
0766 P-FLMR75
Numerical and experimental study of pressure loss at the intake manifold of a formula-SAE
vehicle, E. da T. Marcelino, A. Rocha, L. Correia, R. Duarte (Universidade Federal de
Campina Grande)
1315 P-FLMR76
Study of grape seed oil in the proposal of biolubricants in open systems, A. do A. D. G. Serra,
T. Paixão, I. Ferreira, J. A. N. A. da S. Brasil, P. R. R. Filho (Universidade Estadual do
Maranhão)
104
POSTER SESSION (CONT.) – WED / 6
1377 P-FLMR77
Study of lubrication of castor / linseed vegetable oils through drip lubricated contact wear
test, T. Paixão, A. do A. D. G. Serra, I. Ferreira, P. R. R. Filho (Universidade Estadual do
Maranhão)
1597 P-FLMR78 Study of hydrate formation in transient conditions, C. Kakitani, D. C. Marques, M. M. Neto,
R. Morales, A. Sum (Universidade Tecnológica Federal do Paraná)
2480 P-FLMR79 Optical probes development for flow measurement, L. Braga, H. Pereira, F. Silva, J. Souza, T.
Silva, C. Fernandes, J. Costa, M. Silva (Universidade Federal do Pará)
CODE Industrial Applications and Turbomachinery
0693 P-FLMR80
Project of a tangential flow machine of simplified manufacturing, R. Garcia (Universidade
Federal do Rio Grande do Sul), C. H. Lagemann (Universidade do Vale do Taquari), L.
Hermany (Universidade de Santa Cruz do Sul), G. Lago, J. D. I. Silveira, G. Diehl (Centro
Universitário UNIVATES), R. C. Izquierdo (Universidade Federal do Rio Grande do Sul)
1165 P-FLMR81
Study of dimensional parameters influence on vortex tube behavior, F. P. Branco (Instituto
Federal do Mato Grosso do Sul), F. Montanare, E. D. Buchelt, D. Laporte, B. Rosa
(Universidade Católica Dom Bosco)
1323 P-FLMR82
Modelling, control and measurement of pelton hydraulic turbine: a laboratory case of study,
F. P. Branco (Instituto Federal do Mato Grosso do Sul), M. Willian, J. C. O. de S. Lescano, F.
Montanare, B. Rosa, D. Laporte (Universidade Católica Dom Bosco)
HVAC - Heating, Ventilation, Air-Conditioning and Refrigeration CODE HVAC
2076 P-HVAC1 Air conditioning system: computational numerical analysis, E. M. Ferreira, L. U. Tramontano,
R. R. Sousa (Universidade Federal da Grande Dourados)
2858 P-HVAC2 Viabilitity study of an absorption chiller for the climatization of a shopping center in
Teresina, Piauí, A. L. F. Leite, C. Cezar, C. A. Santos (Universidade Federal da Paraíba)
2926 P-HVAC3
Measurement uncertainties calculation in the cooling capacity determination of split air
conditioners by the air-enthalpy methodology, L. R. Pizzatto, N. Mendes, L. M. Moura
(Pontifícia Universidade Católica do Paraná)
CODE Refrigeration
0300 P-HVAC4
Theoretical-experimental analysis of a finned tube heat exchanger composed of wavy fins
used in thermal systems as condenser, C. de Paula (Universidade Federal de Minas Gerais),
F. de Oliveira (Universidade Salgado de Oliveira), L. Neves (Universidade Federal de São
João del Rei)
1534 P-HVAC5
Modelling and simulation of the thermal generator and rectifier of an absorption
refrigeration prototype, L. C. Martinez, W. Balmant, L. Martinho, J. V. C. Vargas
(Universidade Federal do Paraná)
1821 P-HVAC6
Experimental analysis of an air conditioning system with HFO R1234yf and the influence of
air inlet temperatures, A. G.Gonçalves, J. Copetti, M. H. Macagnan (Universidade do Vale
do Rio dos Sinos)
2513 P-HVAC7
On the development of a technological solution to mitigate summer mortality in brazilian
oysters’ crops: an approach towards a HRS based application, M. A. Garcia (Instituto Federal
de Santa Catarina), L. Mendes, N.Mendes (Pontifícia Universidade Católica do Paraná),
Joaquim Manoel Gonçalves (Instituto Federal de Santa Catarina)
2852 P-HVAC8 Numerical simulation for flow analysis in non-adiabatic capillary tubes, H. Augusto, F. Silva,
C. V. J. da Silva, M. F. Silva, L. J. C. Vasconcelos (Instituto Federal de Pernambuco)
2893 P-HVAC9
Performance of a domestic winery according to the internal localization of the refrigeration
system, F. P. Amado, M. Avelino, E. Sales, F. P. D. de Araujo, E. Silva (Universidade Estácio
de Sá)
MMEN - Materials and Manufacturing Engineering CODE Materials Characterization and Processing
0108 P-MMEN54
Comparative study of technical and visual caracteristics of polianiline-zinc composite and
comercial primer to use in the automotive industry, C. J. Santos, P. C. Borges, C. M. Cruz
(Universidade Tecnológica Federal do Paraná)
0225 P-MMEN55
Influence of high velocity oxy-fuel (HVOF) deposition process on cavitation resistance of
tungsten carbide coatings, M. S. Lamana, A. G. M. Pukasiewicz (Universidade Tecnológica
Federal do Paraná)
0323 P-MMEN56
Study of air quenching influence on valve seat insert obtained with AISI M2 high-speed steel,
M. P. Gomes, I. P. dos Santos, C. Couto, L. A. M. dos Reis, C. S. Mucsi, J. L. Rossi (Instituto
de Pesquisas Energéticas e Nucleares), M. A. Colosio (General Motors do Brasil S.A.)
105
POSTER SESSION (CONT.) – WED / 6
0342 P-MMEN57
Effects of prior heat treatment on AISI 420 steel low-temperature plasma nitrocarburizing, C.
Scheuer (Universidade Federal de Santa Maria), A. D. dos Anjos, R. P. Cardoso, S. Brunatto
(Universidade Federal do Paraná)
0352 P-MMEN58 Thermal characterization of hardmetal by open photoacoustic cell technique, R. G. Drabeski,
A. Braghini Jr., D. Dias, J. Sousa (Universidade Tecnológica Federal do Paraná)
0489 P-MMEN59 Effect of flame treatment in the coating adhesion on polypropylene substrate, E. Medeiros, R.
Brandes, H. A. Al-Qureshi, D. de O. S. Recouvreux (Universidade Federal de Santa Catarina)
0511 P-MMEN60
Analysis of the sharpening angle impact under the useful life of the Tungsten electrode used
in automatic TIG Clad Welding Process, G. Krebs, M. Polli (Universidade Tecnológica
Federal do Paraná)
0573 P-MMEN61
Characterization of thermal effects in the modulus of elasticity of carbon-epoxy laminate
composite, using the impulse excitation technique, M. H. Zanardini (Universidade
Tecnológica Federal do Paraná), A. Treml (Universidade de São Paulo)
0595 P-MMEN62
Behavior of Ti-30Nb-5Mo alloy after cold rolling and aging, M. B. de Oliveira, R. C. Toledo
(Universidade Federal de Mato Grosso), R. J. Contieri (Universidade Estadual de Campinas),
A. de O. F. Hayama (Universidade Federal de Mato Grosso)
0631 P-MMEN63
Characterization of DLC coating in drilling tools, O. Pereira, P. Souza, M. Câmara
(Universidade Federal de Minas Gerais), W. Silva (Universidade Estadual Paulista Julio de
Mesquita Filho), J. R. G. Carneiro (Pontifícia Universidade Católica de Minas Gerais)
0768 P-MMEN64
Development and mechanical characterization the of particulate polymer composite using
rejects of limestone and polyester, F. Freitas, E. R. M. do Nascimento (Universidade Federal
Rural do Semi-Árido), E. Ferreira (Universidade Federal do Rio Grande do Norte), D. F. F.
Martins, A. Batista (Universidade Federal Rural do Semi-Árido)
0776 P-MMEN65
Use of granite powder in development of particulate polymer composites - Mechanical
properties, E. R. M. do Nascimento, F. Freitas(Universidade Federal Rural do Semi-Árido), E.
Ferreira (Universidade Federal do Rio Grande do Norte), D. F. F. Martins, A. Batista
(Universidade Federal Rural do Semi-Árido)
0914 P-MMEN66
Study of the viability of the recycling and melting process of the zirconium alloys chips, L. A.
M. dos Reis, M. P. Gomes, M. Alencar, L. A. Pereira, C. S. Mucsi, J. L. Rossi (Instituto de
Pesquisas Energéticas e Nucleares)
0923 P-MMEN67
Analysis of the influence of geometric arrangement in the modulus of elasticity of composite
materials, T. C. Lapczyk (Universidade Estadual do Oeste do Paraná), A. Treml
(Universidade de São Paulo), L. H. C. Dall' Agnese (Universidade Estadual do Oeste do
Paraná), M. H. Zanardini (Universidade Tecnológica Federal do Paraná)
0943 P-MMEN68
Manufacturing porous Fe electrodes by MIM and plasma sintering, T. S. dos Santos
(Universidade Federal de Santa Maria), L. Schaeffer (Universidade Federal do Rio Grande
do Sul), N. Daudt (Universidade Federal de Santa Maria), C. Binder (Universidade Federal
de Santa Catarina)
1238 P-MMEN69
Influence of lamination techniques in computational simulation: comparison with
experimental results of tensile tests, A. P. Leal, T. P. Tancredi, G. B. Dutra (Universidade
Federal de Santa Catarina)
1247 P-MMEN70
Effect of Isothermal Treatment on Electrical Conductivity of Alloys Al-Cu-Fe-Si-0.15%Zr and
Al-Cu-Fe-Si-0.22%Zr, M. C. Carvalho, R. G. da Silva, E. Prazeres, M. Lobato, J. M. do V.
Quaresma (Universidade Federal do Pará)
1295 P-MMEN71
Production, characterization and stability study of ceramic composites Al2O3-CeO2-TiO2 in
petroleum for coatings of metallic parts of the petroleum industry, N. D. G. Silva, R. A. S.
Ferreira, Y. P. Yadava (Universidade Federal de Pernambuco)
1296 P-MMEN72
Evolution of the Al-Zn alloys microstructure manufactured by the squeeze casting process, F.
Araujo, D. Silva, D. Lima, R. Lima, R. Bernardo, C. Siqueira (Universidade Federal da
Paraíba)
1302 P-MMEN73
Influence of pressure on the microstructure and mechanical properties of alloy Al-0.35% Si-
0.40% Mg manufactured by squeeze casting process, R. Bernardo, D. Lima, F. Araujo, R.
Marques, C. Siqueira (Universidade Federal da Paraíba)
1334 P-MMEN74
Mechanical characterization of polyester resin compound with fiber of glass and wood
caixeta – Tabebuia Cassinoides (lam.) Dc. – for application in aerodesign, A. C. B. Zancanella
(Universidade Federal do Espírito Santo), A. Guimaraes, D. Jaegger, H. Colona, R. Maziero,
D. P. Garcia, B. C. Bragança, A. P. de Barros, I. Belisario (Instituto Federal de Educação
Ciência e Tecnologia do Espirito Santo)
1419 P-MMEN75
Influence of the addition of 2wt% and 6wt% Mg on the macrostructure, electrical
conductivity and ultimate tensile strength of Al-0.18wt% Zr Alloy, R. R. Lima, C. Santana, J.
M. P. Bezerra, M. Lobato, J. M. do V. Quaresma (Universidade Federal do Pará)
106
POSTER SESSION (CONT.) – WED / 6
1443 P-MMEN76
Evaluation of natural hybrid composite through nondestructive tests, J. de S. e Silva Neto, R.
de A. A. Lima, D. K. Cavalcanti, H. Costa, R. A. A. de Aguiar, D.Banea (Centro Federal de
Educação Tecnológica Celso Suckow da Fonseca)
1449 P-MMEN77
Reduction of weight and fuel consumption of vehicles using advanced high strength steels, L.
M. V. Tigrinho (Instituto Federal do Paraná), S. F. Lajarin (Universidade Federal do Paraná),
M. Madi, M. Beltrami (Instituto Federal do Paraná)
1532 P-MMEN78
Electromechanical analysis of the alloy Al-0.05%Cu-0.40%Fe-0.6%Mg-0.15%Ti subjected to
the effect at different temperatures for the T8, R. A. dos Reis, J. M. Do V. Quaresma, J. G. dos
R. Soares, M. C. Carvalho, G. Silva, I. Campos (Universidade Federal do Pará)
1636 P-MMEN79
Preparation and characterization of reprocessed composites of polypropylene reinforced by
wood fibers: physical and mechanical properties, F. Jedyn, T. H. S. F.-Sahagun, K. P. Agapito
(Universidade Federal do Paraná), R. M. J. Amezcua (Universidad De Guadalajara)
1760 P-MMEN80 Cooling systems for electrical machined cooled with seawater, A. Fediuk Jr. (WEG
Equipamentos Elétricos S/A), R. F. Junckes (WEG Equipamentos Elétricos S.A)
1769 P-MMEN81
Study of influence of interlaminar shear strength in polymeric composites hybrid glass /
carbon in structural application, A. C. R. da Conceição, O. B. da C. Vargens Neto, M. Leão
(Instituto Federal Da Bahia), R. Carvalho (Universidade Federal da Bahia)
1775 P-MMEN82
Fractographic of the fracture mode on the hybrid polymeric composites glass / carbon, A. C.
R. da Conceição, O. B. da C. Vargens Neto, M. Leão (Instituto Federal Da Bahia), R.
Carvalho (Universidade Federal da Bahia), G. Oliveira Filho (Universidade Federal de
Pernambuco)
1780 P-MMEN83 Pendular scratch tests as a tool to evaluate abrasion resistance of welded coatings, R. A. de
Carvalho, H. Costa (Universidade Federal do Rio Grande)
1842 P-MMEN84
Electrical and mechanical characterization of Al-Cu-Fe-Si-Zr alloy submitted to heat
treatment, C. Sousa, G. Rebelo, V. Melo, N. Costa, M. Cardoso, J. M. do V. Quaresma
(Universidade Federal do Pará)
1846 P-MMEN85
Structural, electrical and mechanical evaluation of Al-Cu-Fe-Si Alloy modified with [0.15%
and 0.22%] Zr contents, C. Sousa, T. Antunes, G. Oliveira, E. Prazeres, F. Oliveira, J. M. do V.
Quaresma (Universidade Federal do Pará)
NUCE – Nuclear Engineering CODE Nuclear Engineering
0121 P-NUCE1
One-way fluid-structure interaction model to study the influence of the fluid velocity and
coolant channel thickness on the stability of nuclear fuel plates, J. G. Mantecón, M. Mattar
Neto (Instituto de Pesquisas Energéticas e Nucleares)
0622 P-NUCE2
Design and assembling of a prototype automated positioner two-dimensional scanning
coupled to X-ray fluorescence spectrometry, L. Silva, T. Campos (Universidade Federal de
Minas Gerais)
1885 P-NUCE3
Sensitivity analysis thermal hydraulic of the Liquid-Salt-Cooled High-Temperature reactor,
M. C. Ramos, A. L. Costa, M. E. Scari, W. A. Coloma, C. Pereira, M. Veloso (Universidade
Federal de Minas Gerais)
ICONNE - Solid Mechanics CODE Nonlinear methods
0954 P-ICONNE1 Suboptimal nonlinear tracking control of mobile robot using the dynamic model, M.dos S.
Xavier (Universidade Federal do ABC), M. Rafikov (Universidade Federal do ABC)
1264 P-ICONNE2
Evolutionary support vector regression approach applied to backstroke start performance
modelling, L. Coelho (Pontifícia Universidade Católica do Paraná), K. de Jesus (Universidade
Federal do Amazonas), C. E. Klein (Pontifícia Universidade Católica do Paraná), K. de Jesus
(Universidade Federal do Amazonas), V. Mariani (Pontifícia Universidade Católica do
Paraná), L. Machado, M. Vaz, R. Fernandes, J. Paulo Vilas-Boas (Faculdade de Desporto da
Universidade do Porto)
CODE Numerical methods
0745 P-ICONNE3 Numerical study on the performance of square tubes as energy absorbers, J. C. de S. Teles,
R. de Silva, A. Oliveira (Universidade de Brasília)
1362 P-ICONNE4 Equilibrium points around a double rotating mass dipole, L. Santos, A. F. B. A. Prado, D. M.
Sanchez (Instituto Nacional de Pesquisas Espaciais)
1388 P-ICONNE5
On the constructing bifurcation diagram of the quadratic map with floating-point arithmetic,
T. E. Nazaré, E. G. Nepomuceno, B. de P. O. Paiva (Universidade Federal de São João del
Rei)
107
POSTER SESSION (CONT.) – WED / 6
2081 P-ICONNE6 Robust parameter design to optimize a turning process of steel AISI 12l14, F. Almeida, G. F.
Gomes, V. de Paula, R. C. Sabioni, J. H. de F. Gomes (Universidade Federal de Itajubá)
2702 P-ICONNE7 Finite element analysis using arm cluster, P. M. Antunes, M. Bittencourt (Universidade
Estadual de Campinas)
MECH – Mechatronic and Automation CODE Artificial Intelligent Applications
0269 P-MECH13 Transmission sizing of a formula-type vehicle using artificial neural networks, B. Diniz, L. L.
Nascimento (Universidade Federal da Bahia)
0282 P-MECH14
Interlaminar shear strength of continuous carbon fiber reinforced thermoplastic composites
manufactured by 3D printing, T. Dutra, R. T. L. Ferreira (Instituto Tecnológico de
Aeronáutica), H. Resende (Instituto de Pesquisas Tecnológicas do Estado de São Paulo)
0521 P-MECH15 Knowledge-based systems in design of mechatronic products, P. Rangel (Instituto Federal de
Santa Catarina), J. Silva (Universidade Federal de Santa Catarina)
0542 P-MECH16 Meta-heuristics applied to system identification, F. M. U. de Araújo, A. G. V. Severino
(Universidade Federal do Rio Grande do Norte)
0639 P-MECH17 Different methods for updating the modified anfis parameters, F. M. U. de Araújo, J. K. E. da
C. Martins (Universidade Federal do Rio Grande do Norte)
1162 P-MECH18 Analysis and classification of welded joint defects by ultrassonic testing and artificial neural
networks, T. M. Barroso, J. F. S. Feiteira, R. P. de Siqueira (Universidade Federal Fluminense)
1600 P-MECH19
Investigating the use of random forest, gradient boosting machine, support vector machine
and their ensemble applied to fault detection, L. Coelho (Pontifícia Universidade Católica do
Paraná), L. F. Nogoseke, G. H. B. Andrade, M. Boaretto (Universidade Federal do Paraná)
2312 P-MECH20 Embedded fuzzy controller in reconfigurable systems for obstacles avoidance in a navigation
system for visually impaired, T. R. de Jesus, D. Munoz (Universidade de Brasília)
2904 P-MECH21 Paraconsistent annoted logic in the context of petri nets - an industrial application, N.
Rodrigues, M. Blos (Universidade Santa Cecília)
CODE Computer Vision
1471 P-MECH22
Deep learning approach based on convolutional neural networks for image processing
applications, L. Coelho, J. Sauer (Pontifícia Universidade Católica do Paraná), M. Boaretto
(Universidade Federal do Paraná), E. G. Gruska, A. Canciglieri (Pontifícia Universidade
Católica do Paraná), G. H. B. Andrade (Universidade Federal do Paraná)
2914 P-MECH23
Development of an application for analysis and studies of an electric vehicle, F. do R. Barros
(Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), D. Soares
(Universidade Estadual do Rio de Janeiro)
CODE Industrial Informatics, Discrete and Hybrid Systems
0418 P-MECH24 Implementation of signal interpreted petri nets using C language in Arduino, M. U. Borges,
E. Lima II (Universidade Federal de Minas Gerais)
2812 P-MECH25
Hybrid system using acoustic emission and electric current for fuzzy diagnosis of surface
wear in gearbox coupled to induction motor, A. Sena, L. J. C. Vasconcelos, A. K. F. dos
Santos, D. Valadares (Instituto Federal de Pernambuco)
CODE Metrology
0945 P-MECH26 Metrological characterization of a torque shaft used in a microtorquemeter, M. Alencar, C. S.
Mucsi, L. C. Aranha, J. L. Rossi (Instituto de Pesquisas Energéticas e Nucleares)
2237 P-MECH27 Design and development of perineometric signals acquisition system, via wireless
(Bluetooth), R. Teles, M. Araújo, M. Micussi (Universidade Federal do Rio Grande do Norte)
2354 P-MECH28
Evaluation of contour errors in CNC 3-axis machining center using the telescoping ballbar
system, F. A. V. da Silva, L. da S. Diniz (Instituto Federal de Educação, Ciência e Tecnologia
da Paraíba), J. C. de Lima Jr., J. Silva (Universidade Federal da Paraíba)
2589 P-MECH29 Remote evaluation of thermal comfort conditions in academic laboratories, M. R. M.
Mudrek, R. G. Bartz, R. Z. Freire (Pontifícia Universidade Católica do Paraná)
108
POSTER SESSION THU / 7
ENACEM – Education Symposium CODE Education Symposium
0078 P-ENACEM1
Management of the maintenance: the economy may be the result of simple controls, R.
Martins (Universidade Federal Fluminense), A. L. V. de Carvalho (Universidade Candido
Mendes)
2887 P-ENACEM2
Instrumentation of a didactic rotating machine bench for fault detection based on frequency
domain analysis, L. S. Yamane, M. Salles, P. R. O. Martins, J. M. Louzada Neto (Universidade
Federal do Amazonas)
2910 P-ENACEM3
Proposal for a practical classroom in the education of alternative energies with a small
power wind generator, S. Queiroz, P. Celestino, I. de S. Queiroz Jr. (Universidade Federal
Rural do Semi-Árido), I. B. de Almeida, C. A. de Oliveira (Instituto Federal de Educação,
Ciência e Tecnologia do Rio Grande do Norte)
5967 P-ENACEM4 Study of teaching methodologies aiming at a more meaningful learning in engineering
subjects, A. C. V. de Oliveira, A. M. Souza, E. Assis (Universidade Federal de Uberlândia)
FRFS – Fracture, Fatigue, and Structural Integrity CODE Fracture, Fatigue, and Structural Integrity
0543 P-FRFS1
Computational interface to size a Bi supported power transmission shaft with up to four
cylindrical gears, L. F. B. de Moraes, B. Diniz, L. F. B. de Moraes, L. Gusmão (Universidade
Federal da Bahia)
0597 P-FRFS2
Evaluation of the threshold linear elastic toughness in API 5CT P110 steel by means of
hydrogen assisted fracture tests, M. S. de Oliveira, A. A. Silva, M. A. dos Santos
(Universidade Federal de Campina Grande), J. A. P. Carrasco (Universidade Federal de
Pernambuco), J. Marques (Universidade Federal de Campina Grande)
0743 P-FRFS3 Experimental evaluation of the acoustic emission technique applied to cotton fiber composite
material, F. Eloy, A. Ancelotti, S. Cunha Jr, A. P. Filho (Universidade Federal de Itajubá)
1680 P-FRFS4
A finite element study of the influence of graphite nodules size on subsurface contact stresses
of austempered ductile iron gear, J. Lazzaron, C. H. Silva, M. A. Luersen (Universidade
Tecnológica Federal do Paraná)
1745 P-FRFS5
Modeling of an equipment for thermal fatigue testing. S. A. da Silva, A. Brandim (Instituto
Federal de Ciência, Educação e Tecnologia do Piauí), A. E. Rocha Filho (Universidade
Federal de Santa Catarina), F. A. dos Santos (Universidade Estadual do Ceará), J. Oliveira
Neto (Instituto Federal de Ciência, Educação e Tecnologia do Piauí)
1853 P-FRFS6 Fatigue crack growth of AA2050 T84 alloy under flights loading. A. Chemin, C. Soares C.
Ruchert (Universidade de São Paulo)
2036 P-FRFS7
Static, dynamic and modal analysis of ladder type chassis and leaf spring suspension of
willys jeep utilizing the finite elements method. R. M. Garcia, C. F. De Q. Araújo, R. M. Garcia,
B. de S. Rodrigues, C. Anflor (Universidade de Brasília)
2366 P-FRFS8 Application of stress concentrators in the steel a case study. R. N. de Melo Filho, F.
Cavalcante (Universidade Federal Rural do Semi-Árido)
2384 P-FRFS9
Effects of the multi manufacturing weld repairs on the fatigue Crack Growth in a critic to the
flight-safety structure made from AISI 4130 steel. M. P. Nascimento (Universidade Estadual
Paulista Julio de Mesquita Filho)
DYNM – Dynamics, Control, Vibrations and Acoustics CODE Vehicle dynamics
0166 P-DYNM31
Evaluation of the floor-seat transmissibility (SEAT) in riding vehicles and verification of
vibration levels regarding health and comfort in WBV. J. S. Fagundes, H. Gomes
(Universidade Federal do Rio Grande do Sul)
0351 P-DYNM32 Dynamic Analysis of Comfort and Health Effects of a Baja SAE Vehicle. J. S. Fagundes,
Herbert Gomes (Universidade Federal do Rio Grande do Sul)
1407 P-DYNM33
Development of a vehicle prototype of high energy efficiency, with internal combustion
engine. G. H. S. Oliveira, K. Martins, K. Barbosa, A. S. de Alencar, E. Martins, C. V. P. Costa Jr,
M. da S. Serejo, L. Neves (Instituto Federal de Educação, Ciência e Tecnologia do
Maranhão)
1415 P-DYNM34
Development and implementation of a shift assistance system for an automotive chassis
dynamometer. E. Bertoti, J. Eckert, R. Y. Yamashita, F. G. Dedini, L. Silva (Universidade
Estadual de Campinas)
109
POSTER SESSION (CONT.) – THU / 7
1910 P-DYNM35 Design and application of a static H_∞ control for an active suspension system. D. A. da
Mata, M. dos S. Coimbra, R. L. Pereira (Universidade Federal de Itajubá)
1981 P-DYNM36 Dynamic modeling of passive hydraulic engine mounts. F. Y. Watanabe, G. O. Miguel
(Universidade Federal de São Carlos)
ENTS – Energy and Thermal Sciences CODE Heat and Mass Transfer Fundamentals
0546 P-ENTS72 Climate analysis in automobiles. R. S. Rodrigues (Pontifícia Universidade Católica do
Paraná)
0758 P-ENTS73
Numerical simulation of drying of porous ceramic industrial brick: Analysis of parameters of
temperature and moisture content. R. Sousa, M. de V. Araújo, S. R. de Farias Neto (, A. G. B.
De Lima (Universidade Federal de Campina Grande)
0899 P-ENTS74
A study of the boundary condition applied in description of convective drying of ginger. J. C.
R. de Araújo (Universidade Federal do Rio Grande do Norte), I. A. Da Silva, A. F. da S. Jr, J.
S. P. de Ataíde, V. S. O. Farias, W. P. da Silva (Universidade Federal de Campina Grande)
1113 P-ENTS75 Analysis the temperature of three-dimensional analytical solution in Heat Conduction Two-
layer. G. Oliveira, G. Guimaraes, S. Ribeiro (Universidade Federal de Uberlândia)
1224 P-ENTS76 Numerical analysis of the MBV parameter for plywood, G. Roiko, L. M. Moura (Pontifícia
Universidade Católica do Paraná)
1585 P-ENTS77
Experimental study of film coefficient in the cooling of a solid in ambient air. E. Chiaramonte
(Universidade Federal do Pampa), R. Garcia, L. Ries, C. Pibernat, A. Schmitz, F. Juchem
(Universidade Federal do Rio Grande do Sul)
1684 P-ENTS78 Study and manufacture of sunlight diffractors. Í. K. A. Lucena, J. W. O. Silva, J. Mendes, S. L.
De L. Cavalcanti, V. L. Vieira (Universidade Federal do Rio Grande do Norte)
1701 P-ENTS79
Effects of the head loss and temperature of adsorption in the bed adsorptive. R. Díaz (Centro
Federal de Educação Tecnológica Celso Suckow da Fonseca), P. Quintans, L. A. Sphaier
(Universidade Federal Fluminense)
1743 P-ENTS80
Selection of thermal insulation applied in industrial shed roof using genetic algorithm. M. N.
Stamoulis, G. Santos, A. M. Tusset , D. P. Vasconcellos, C. Diedrich (Universidade
Tecnológica Federal do Paraná)
1791 P-ENTS81 Study of temperature distribution in a steady-state concrete chimney. K. P. M. De Oliveira, G.
Bonillo, R. S. Pereira (Universidade Federal de Mato Grosso)
1970 P-ENTS82
Numerical simulation of mixed convection in cavity filled with heterogeneous and
homogeneous porous medium. R. N. Tavares, F. C. De Lai, S. Junqueira (Universidade
Tecnológica Federal do Paraná)
2444 P-ENTS83
Minimizing methods for frost growth in evaporators using different coating layers, R. C. R. da
Silva (Universidade Tecnológica Federal do Paraná), P. Delgado (Faculdade Guarapuava),
G. S. Rodrigues (Universidade Estadual de Campinas)
2927 P-ENTS84 Analysis of defects in wood materials using infrared thermography, T. Semann, L. M. Moura,
S. H. Och (Pontifícia Universidade Católica do Paraná)
CODE Thermodynamics and Thermal Systems
0065 P-ENTS85
Modeling and simulation of a shell and tube heat exchanger used for reducing flue gas
temperature for microalgae mitigation. G. Finger, J. G. B. Martinez, L. C. Martinez, I. Costa, L.
Rigatti, Y. Kovara, A. Gonçalves, W. Balmant, A. Mariano , J. V. C. Vargas (Universidade
Federal do Paraná)
0069 P-ENTS86 Development of a data acquisition system using open platform. R. Predolin,V. L. Scalon
(Universidade Estadual Paulista - Faculdade de Engenharia de Bauru)
0084 P-ENTS87 Green roof building analysis and simulation of thermo-energy behavior. R. Predolin, V. L.
Scalon (Universidade Estadual Paulista - Faculdade de Engenharia de Bauru)
0187 P-ENTS88 Development and analysis of low cost solar heather. D. Taborda, E. Machado, I. Carlos, J. A.
Silva (Universidade Federal de São João del Rei)
0259 P-ENTS89
Development and performance analysis of a compression refrigeration cycle. S. Rabelo, S.
Rabelo (Universidade Federal de Minas Gerais), H. G. Coutinho Jr, F. Vasconcelos, Y. Ávila ,
J. P. P. Martins, M. Niterói, G. Oliveira, L. Teixeira, E. A. S. Nogueira, J. D. Simeão
(Universidade de Itaúna)
0836 P-ENTS90
Mathematical model of a heat exchanger operating with emissions from a thermal
treatment of municipal solid waste. M. N. Muñoz, J. V. C. Vargas, W. Balmant (Universidade
Federal do Paraná)
0913 P-ENTS91 Solarium: machine for solar thermal applications in isolated communities on amazon. A.
Tobias, R. I. Mendes (Universidade Estácio de Sá)
110
POSTER SESSION (CONT.) – THU / 7
1183 P-ENTS92
Using a classifier for behavior assessment of refrigeration system. T. Mendes (Universidade
Federal de Itajubá), E. Horta (Universidade Federal dos Vales do Jequitinhonha e Mucuri),
M. Guzella (Universidade de São Paulo), O. J. Venturini, M. Pirani (Universidade Federal de
Itajubá)
1339 P-ENTS93 Thermodynamic analysis of an organic rankine cycle using the burning of the açaí seed as
heat source. A. de C. Cavalcante (Universidade Federal do Amazonas)
1643 P-ENTS94
Thermodynamic analysis of adiabatic compressed air energy storage systems. T. L.
Camargos, D. L. F. Pottie, J. V. N. Moreira, G. Barros, M. Porto (Universidade Federal de
Minas Gerais)
1931 P-ENTS95 Modeling and simulation of thermal management systems of electronic equipment . L.
Rigatti, J. V. C. Vargas, W. Balmant (Universidade Federal do Paraná)
2208 P-ENTS96
Analysis of thermal insulation and impact resistance of composites produced with green
coconut residue. W. Librelon (Universidade Federal de Minas Gerais), A. A. Xavier (Instituto
Newton Paiva), P. S. Uliana Jr, V. Lins, M. Houmard (Universidade Federal de Minas Gerais)
2518 P-ENTS97 Thermodynamic modeling of the autoignition temperature. B. Hannud, M. Pimenta
(Universidade de São Paulo)
2522 P-ENTS98 Establishment of energy demands for a residential building in João Pessoa, Northeast Brazil.
F. Melo, M. Carvalho (Universidade Federal da Paraíba)
2525 P-ENTS99
Multicriteria optimization of the energy supply for a Northeast Brazil hospital, considering
solar photovoltaic energy. J. N. de Figueiredo, B. C. T. de Carvalho, C. T. M. C. B. de Melo, J.
Figueiredo, M. Carvalho (Universidade Federal da Paraíba)
5313 P-ENTS100
Design of a mechanical device for the reduction of noise and emission of gas and particles
for diesel engines. J. Silva, L. Figueiredo, H. Pascoal, D. S. T. Mendes Jr, C. Tavares, A.
Conceição, E. Santos (Universidade Federal do Pará), C. E. A. da Costa (Brentech Energia
S/A)
CODE Thermo-Economic Analysis and Energy Policy
0852 P-ENTS101
Computational modeling and energy evaluation of a real cooling system of a refrigeration
chamber. L. Lobo, L. A. S. LEITE, M. A. F. Costa, G. R. dos Anjos (Universidade Estadual do
Rio de Janeiro)
0930 P-ENTS102
LCA of the insertion of an integrated lignocellulosic ethanol plant to a sugarcane plant. J.
Furtado, J. C. E. Palacio, F. Dovichi, E. E. Lora, J. E. L. da Costa (Universidade Federal de
Itajubá)
MMEN - Materials and Manufacturing Engineering CODE Materials Characterization and Processing
0939 P-MMEN86 Tribological properties of boronized AISI 4140 steel. S. Aichholz, R. Torres, P. Soares , A.
Almeida (Pontifícia Universidade Católica do Paraná)
1942 P-MMEN87 The influence of specimen surface roughness on tensile testing results. M. Beltrami,, M.
Kikuchi, R. Sucaria, G. Souza (Instituto Federal do Paraná)
1948 P-MMEN88
Study of stability of Al2O3-Y2O3-TiO2 composite ceramics in crude petroleum environment
for inert coating applications in petroleum industry. L. Albuquerque, B. Constantino, R. A. S.
Ferreira, Y. P. Yadava, M. T. G. Lima (Universidade Federal de Pernambuco)
2103 P-MMEN89
Microstructural characterization of the alloy Ti-6Al-4V obtained by different manufacturing
processes. C. D. da Silva, M. Larosa, A. Jardini, C. Zavaglia (Universidade Estadual de
Campinas)
2134 P-MMEN90
Effect of period thickness on residual stress values of Cr/CrN multilayer hard coatings. A.
Gomez (Pontificia Universidad Javeriana Cali), D. Arias, J. M. V. Restrepo (Universidad
Nacional de Colombia), R. Souza (Universidade de São Paulo)
2142 P-MMEN91 Microhardness behaviour of TiSiN/AlCrN coating after hight temperature tribological test, C.
B. Pereira, P. Soares, R. D. Torres (Pontifícia Universidade Católica do Paraná)
2145 P-MMEN92
Modification of polypropylene/glass fiber composite by electron beam irradiation. M. A. de
Castro, R. Michalak, D. C. Pfeifer, D. de O. S. Recouvreux (Universidade Federal de Santa
Catarina)
2231 P-MMEN93
Reuse of waste industry buttonhole for manufacture of glass and jute fiber composite
materials: static and dynamic characterization. A. K. C. de Araújo, L. de L. Freire, M.
Furukava (UNIVERSIDADE FEDERAL RURAL O SEMI-ARIDO), M. Furukava (Universidade
Federal do Rio Grande do Norte), H. J. F. Diógenes (Universidade Federal da Paraíba)
2280 P-MMEN94 Banded structure dispersion of ASTM A588 Grade B steel after successive low cooling rate
heat treatments. D. Soares, G. Stieven, J. Lopes (Universidade Federal do Pará)
2294 P-MMEN95 Microstructural analysis and hardness of welds overlay of FeCrMo alloys. C. Lima, A. R.
Correa, D. C. S. Cardoso, E. Braga (Universidade Federal do Pará)
111
POSTER SESSION (CONT.) – THU / 7
2420 P-MMEN96
Behavior of intradendritic and interdendritic microhardness of an aluminum-silicion alloy
directionally solidified. G. Stieven, D. Soares, D. Lafont, E. Lins, E. OLIVEIRA (Universidade
Federal do Sul e Sudeste do Pará)
2428 P-MMEN97 Graphite size and distribution of nodular cast iron obtained by continuous casting. S.
Manenti, P. V. Marcondes, P. Soares, R. Torres (Pontifícia Universidade Católica do Paraná)
2530 P-MMEN98 Evaluation of fatigue resistance of Ti-6Al-4V after thermal treatment. M. Silva, R. C. Souza,
R. Duarte (Instituto Federal de Educação, Ciência e Tecnologia de São Paulo)
2628 P-MMEN99 Comparison between two surface preparations of WC-10Co-4Cr and their effect on erosion
wear resistance. D. M. P. Nagasima, R. Souza (Universidade de São Paulo)
2636 P-MMEN100 Mechanical strength of synthetic stones obtained from soapstone residues in Ouro Preto
region – Brazil. M. G. A. Ranieri (Universidade Federal de Itajubá)
2755 P-MMEN101
Obtaining and study a composite with polyester resin matrix and load of chicken eggshell. L.
Souza, M. Andrade, M. Oliveira, K. Fontes, I. Medeiros (Universidade Federal do Rio Grande
do Norte)
2756 P-MMEN102
Obtaining and characterizing a composition of polyester resin matrix and wood residues. L.
Souza, L. G. V. M. de S. (Universidade Federal do Rio Grande do Norte), I. Medeiros, M.
Andrade, A. G. Cavalcante, K. Fontes (Universidade Federal do Rio Grande do Norte)
2757 P-MMEN103
Influence on Thermal Treatments in the Hardness and Micro Hardness of the Alloy 7075, E.
G. M. Bejarano, M. M. S. Suárez, Y. F. Q. Gamboa, M. de L. N. M. Melo (Universidade
Federal de Itajubá)
2823 P-MMEN104
Tribological properties of unsaturated polyester reinforced with graphite, V. Borges
(Universidade Tecnológica Federal do Paraná), J. H. S. Hartmann (Universidade Tecnológica
Federal do Paraná - Campus Guarapuava), C. M. Cruz, C. H. Silva (Universidade
Tecnológica Federal do Paraná)
2830 P-MMEN105 Ceramics cutting tools apply on dry turning of gray and nodular cast iron, T. A. de Sousa, J.
V. C. de Sousa (Universidade Estadual Paulista Julio de Mesquita Filho)
2837 P-MMEN106
Evaluation of the elastic properties of composite materials by the rule of mixtures and
computer program, J. Figueiredo, I. Okabe, G. F. Miranda, M. Kuwahara, R. Fujiyama, C. T.
N. M. Branco, I. dos S. Gomes, D. Silva, L. M. Almeida, F. de Sousa (Universidade Federal
do Pará), L. F. N. Marques (Universidade Federal do Sul e do Sudeste do Pará)
2849 P-MMEN107
Theoretical-experimental comparison of the classical laminate theory for composite
materials of fiberglass and polyester matrix, C. T. N. M. Branco, I. dos S. Gomes, D. Silva, L.
M. Almeida, F. de Sousa (Universidade Federal do Pará), L. F. N. Marques (Universidade
Federal do Sul e do Sudeste do Pará), J. Figueiredo, I. Okabe, G. F. Miranda, M. Kuwahara,
R. Fujiyama (Universidade Federal do Pará)
2850 P-MMEN108
Evaluation of the influence of the bamboo fibers of the basal, intermediate and top region on
the mechanical and fractographic properties of composite materials of polymeric matrix, M.
Kuwahara, F. Silva, C. T. N. M.Branco, I. dos S. Gomes, D. Silva, L. M. Almeida, F. de Sousa ,
J. Figueiredo, I. Okabe, G. F. Miranda, R. Fujiyama (Universidade Federal do Pará)
2921 P-MMEN109 Synthesis and characterization of cnt-o 2 thin films as double layer capacitor electrode, M.
B. Moraes, G. Thim (Instituto Tecnológico de Aeronáutica)
5145 P-MMEN110
Study of mechanical behavior at cryogenic temperature of AISI 430 with different strain
rates, L. O. Felicio, M. Azevedo, M. Crivoi, M. T. Izumi, R. S Namur, O. Cintho (Universidade
Estadual de Ponta Grossa)
CODE Additive Manufacture
0563 P-MMEN111
Development of a split mold with low-cost materials for manufacturing of mechanical fixing
elements by powder metallurgy process, U. Júnior, Z. Vilar, P. Caminha, M. P. S. Barbosa, P.
Queiroz, M. Fonseca (Universidade Federal Rural do Semi-Árido)
1402 P-MMEN112
A methodology for measuring the compression behavior of Ti-6Al-4V cellular structures
fabricated by Electron Beam Melting, G. Fraga (Universidade Federal de Santa Catarina), J.
V. L. da Silva, P. I. Neto (Centro de Tecnologia da Informação Renato Archer), C. R. de M.
Roesler (Universidade Federal de Santa Catarina)
1460 P-MMEN113
Comparison of the porosity of scaffolds manufactured by two additive manufacturing
technologies: SLA and FDM, B. V. Magaldi, A. C. Araujo, M. de O. da C. M. Pinto, R. Thiré
(Universidade Federal do Rio de Janeiro)
1582 P-MMEN114
3D Facial Reconstruction by photographs, P. Reis, A. Maia, J. C. C. Rubio (Universidade
Federal de Minas Gerais), M. R. V. Lana (Associação Mineira De Reabilitação), P. Faria, B.
Lizardo (Universidade Federal de Minas Gerais)
1957 P-MMEN115
Low cost tensile testing machine for FDM parts mechanical behavior characterization, A.
Cavalcante, I. M. Pepe, N. Oliveira, M. V. Lima, J. A. M. Alfonzo (Universidade Federal da
Bahia)
112
POSTER SESSION (CONT.) – THU / 7
2024 P-MMEN116
Optical scanning methods: a comparative study, P. Reis (Universidade Federal de Minas
Gerais), M. R. V. Lana, A. Horta (Associação Mineira De Reabilitação), M. A. Borges
(Universidade Federal de Minas Gerais)
2435 P-MMEN117 Proposal of an advanced data model for step-nc compliant additive manufacturing, E.
Rodriguez, R. Bonnard, A. Alvares (Universidade de Brasília)
2661 P-MMEN118 Influence of tool path optimization in additive manufacturing based on material extrusion,
N. Volpato, T. Zanotto, T. Weller (Universidade Tecnológica Federal do Paraná)
2761 P-MMEN119 3D DLP additive manufacturing: printer and validation, L. Olmos, J. Lovo, I. L. de Camargo,
C. Consonni, C. Fortulan (Universidade de São Paulo)
PROD - Product Engineering CODE Product Engineering
0557 P-PROD1
High power water jet: testbench development for performance investigation in pressurized
condition, J. Passos, R. P. dos Santos (Universidade Federal de Santa Catarina), M. Noronha
(Instituto Federal de Santa Catarina)
1978 P-PROD2
Improvement of thermoforming process aiming higher productivity, M. Pereira (Universidade
Federal de Santa Catarina), A. da C. S. Netto (Instituto Federal de Santa Catarina), H. Silva
(Universidade do Extremo Sul Catarinense)
2290 P-PROD3
Controlled atmosphere ozone generator, C. Matos, L. R. Oliveira (Universidade Federal da
Bahia), L. C. S. Junior (Universidade Federal do Recôncavo da Bahia), I. M. Pepe
(Universidade Federal da Bahia)
2584 P-PROD4
The development of a dynamometer applied to a wheelchair, C. Rech, P. Balafa, A. Knop, C.
R. O. dos Santos (Centro Universitário La Salle), P. S. Schneider (Universidade Federal do
Rio Grande do Sul)
2775 P-PROD5 A study of the application of the RSM methodology at the product design scenario, L. B.
Fornazzari, L. Silva, F. G. Dedini (Universidade Estadual de Campinas)
2780 P-PROD6
Design and manufacture of attritor laboratory mill for low cost, L. Albergaria, C. Teodoro, D.
Junqueira, M. M. Junqueira, D. Ribeiro (Universidade Federal de Itajubá), M. E. Lopes
(Centro Universitário de Itajubá), G. Silva (Universidade Federal de Itajubá)
2797 P-PROD7 Topological optimization of an engine bracket, M. T. B. dos Anjos (Fiat Chrysler
Automobiles), D. M. Jr. (Universidade Federal de Minas Gerais)
2836 P-PROD8 Particle swarm optimization of turbojet engine thrust, F. Stark, D. Jeronymo (Universidade
Tecnológica Federal do Paraná)
SMST - Smart Materials and Structures CODE Smart Materials and Structures
0086 P-SMST1
IPMC – multiphysics actuator: computer simulation in a 1D beam of Bernoulli-Euler, A. L.
Pereira (Centro Federal de Educação Tecnológica Celso Suckow da Fonseca), F. Duda
(Universidade Federal do Rio de Janeiro), A. C. C. de Souza (Universidade Federal
Fluminense)
0577 P-SMST2
An alternative way of sensing in smart structures using piezoelectric elements, A. Gonçalves
(Universidade Federal da Paraíba), A. Emiliavaca (Universidade Federal de Campina
Grande), C. da R. Souto, J. M. B. Sobrinho, M. F. Cunha (Universidade Federal da Paraíba)
1175 P-SMST3 Study of the effect of heat treatment on a NITI alloy, W. J, L, Bezerra, P. Queiroz, C. Alves, Z.
Vilar, D. A. Bezerra (Universidade Federal Rural do Semi-Árido)
1363 P-SMST4
Frequency Range Optimization by the Use of ACO and BCO Methods in the Impedance-
based SHM, J. P. M. Bento, B. P. Barella, S. W. Rezende, J. dos R. V. de Moura Jr
(Universidade Federal de Goiás)
1533 P-SMST5
Analysis of the effect of heat treatments in the manufacturing process of shape memory
alloy springs, B. T. Duarte, R. A. A. de Aguiar, P. M. C. L. Pacheco (Centro Federal de
Educação Tecnológica Celso Suckow da Fonseca)
1894 P-SMST6
Characterization of an active composite obtained with shape memory alloys, Z. Vilar, W. J.
L. Bezerra, D. A. Bezerra (Universidade Federal Rural o Semi-Arido), C. J. de Araujo
(Universidade Federal de Campina Grande), P. Queiroz, G. Diniz (Universidade Federal
Rural o Semi-Arido)
1973 P-SMST7
Numerical simulation and experimental procedure for heating and cooling of a sma spring
device, A. Oliveira, P. C. S. da Silva, J. R. F. Oliveira (Universidade Federal de Campina
Grande), R. P. B. dos Reis (Universidade Federal Rural do Semi-Árido), A. A. Silva, C. R. B.
Filho (Universidade Federal de Campina Grande)
113
POSTER SESSION (CONT.) – THU / 7
2057 P-SMST8
Conversion of superelastic NiTi SMA wires in thermomechanical actuators: a study based on
heat treatments, D. J. A. Ribeiro, P. C. S. da Silva, C. J. de Araujo, E. da T. Marcelino
(Universidade Federal de Campina Grande)
2690 P-SMST9
Characterization of Nitinol alloy in the commercial state, R. Lins (Universidade Federal do
Rio Grande do Norte), R. F. Alves (Universidade Federal da Paraíba), L. Costa, G. Oliveira, T.
de Oliveira, T. Viana (Universidade Federal do Rio Grande do Norte)
2883 P-SMST10 A topology optimization solver applied to 3D compliant mechanism design, M. Reis, C. Lima
(Universidade Federal do ABC)
2902 P-SMST11
Mechanical behavior of Ni-Ti SMA helical springs manufactured by investment casting, J. J.
de M. Santiago, P. C. S. da Silva (Universidade Federal de Campina Grande), J. Simoes
(Universidade Federal Rural Do Semi-Arido), C. J. de Araujo (Universidade Federal de
Campina Grande)
MECH - Mechatronics and Automation CODE Robotics, Sensors & Actuators
0271 P-MECH30 Project and design of a 1D probe positioner, J. G. dos R. Soares, D. R. S. Guerra, F. Barros, P.
Silva, F. Martelli (Universidade Federal do Pará)
0272 P-MECH31 Kinematic modeling of 5r parallel symmetrical mechanism subjected to uncertainties, L. A.
Martins, F. A. Lara-Molina, T. F. Proenca (Universidade Tecnológica Federal do Paraná)
1746 P-MECH32
Explorer robot:platform based on raspberry board, F. Aureliano, A. Fidelis (Centro
Universitário do Sul de Minas Gerais ), A. Lopes (Universidade Federal de Itajubá), J. Freitas
(Centro Universitário do Sul de Minas)
1786 P-MECH33
Design of a cost effective educational instrument to study solar tracking strategies, B. Alves
(Instituto Federal de Educação, Ciência e Tecnologia do Ceará), F. Brito, R. Melo (Instituto
Federal do Ceará)
1896 P-MECH34 Smoothing transverse profiles of point clouds using mathematical morphology and energy
minimization, J. M. S. T. da Motta, R. Gonzalez (Universidade de Brasília)
2011 P-MECH35 Development of a prototype circuit for viscous damping measurement, R. L. Thomaz, V. Fl Jr,
M. H. Granza (Universidade Tecnológica Federal do Paraná)
2174 P-MECH36
A new mechanical project for a lower limb exoskeleton, G. N. da S. Dantas, M. Araújo, P. J.
Alsina (Universidade Federal do Rio Grande do Norte), L. R. R. Araujo (Instituto Federal de
Educação, Ciência e Tecnologia do Rio Grande do Norte)
2190 P-MECH37 Design and development of a load cell in an intelligent elbow crutch for an exoskeleton, F. M.
C. Trigueiro, M. Araújo (Universidade Federal do Rio Grande do Norte)
2305 P-MECH38 Conductivity and capacitance sensor for measuring water and oil emulsions, L. Ferreira, J. L.
Silva Neto, J. Loureiro, W. Monteiro, A. Guimarães (Universidade Federal do Rio de Janeiro)
2352 P-MECH39
Design and development of a wheeled robot soccer team, M.E. P. Fernandes, M. Araújo, E.
da S. Souza, D. S. de Morais, A. A. D. de Medeiros (Universidade Federal do Rio Grande do
Norte)
2710 P-MECH40 Mechanical project and control of robot guidelines for visual disabilities, P. Lima, M. Neto, É.
Franklin , D. Resende, A. Sena (Instituto Federal de Pernambuco)
2790 P-MECH41 Robotic hand operated with super-elastic memory wires, P. Lima, M. Neto, A. Silva, M. F.
Silva, S. Santos, A. Sena (Instituto Federal de Pernambuco)
2813 P-MECH42 Construction and control pid of delta parallel robot, A.Sena, A. Silva, A. Silva (Instituto
Federal de Pernambuco)
5805 P-MECH43 Modelling and control of a wheeled mobile robot, A. Oliveira, M. E.M. Meza, D. P. F. Correa
(Universidade Federal do ABC)