Data Sheet DE/en 200 - INTEGRA-pw 943

projekt w - Systeme aus Stahl GmbHGeseker Straße 36 Phone +49 5258 9828-033154 Salzkotten Fax +49 5258 9828-228Germany info@projekt-w.de

www.projekt-w.com

The draft is the intellectual property of projekt w - Systeme aus Stahl GmbH and is copyright protected. It is prohibited to duplicate or distribute the draft to third parties without express permission. Violations shall be subject to claims for compensation.

We reserve the right to make technical amendments.Status: 02.05.2020 (ID 01)

Technical data:Dimensions: INTEGRA-pw 943Mesh size: 50 x 100/200 mmMax. element width: 5506 mm Produced in the grid of 50 mm Material: Steel S235 Fastening flange S355Surface: Hot-dip galvanised in accordance with EN ISO 1461Optional: Powder-coatingDynamic impact in accordance with EN 1991-1-7Case example with car 10km/h and 2.5t: Mat length: 4706 mm Deflection: 400 mm Connecting forces: 36 kN per conn.More INTEGRA-pw Data sheets:DE/en 202 - Drill template system

heights 1000 DE/en 203 - Support twist DE/en 204 - Centre-axis ramp DE/en 205 - Installation details DE/en 206 - Calculation 0 % - 4 %DE/en 207 - Calculation 4 % -10 %DE/en 208 - Calculation 10 % - 16 %DE/en 212 - Fastening set

Max. element width (W) = 5506

Scope of supply INTEGRA-pw fastening set comprising:- 4x INTEGRA-pw crest- 4x INTEGRA-pw fastening flange- 4x INTEGRA-pw counter flange- 4x hexagonal bolt ISO 4017 - M16x45- 8.8 - tzn incl. nut and washer- 12x hexagonal bolt ISO 4017 - M10x35- 8.8 - tzn incl. nut and washer

INTEGRA-pw as impact- and fall protection

Customer-supplied support profile, e.g. HEA

INTEGRA-pw safety barrier

55

943

German Approval