Post on 22-Feb-2017
BIODATA :
Name : Ir. Duddy Arisandi, S.T., M.T.
Nation : Indonesian
Place / Date of birth : Ampenan / August, 23, 1969
Gender : Male
Religion : Moslem
Marital Status : Married with three children
Wife : Ihah Sholihah, S. Ag
Children : 1. M. Husein Haekal, 2. M. Bintang Aththuur, 3. M. Nursyams Zahran
Hobby : Reading, Sport, Listening music
Address : Jl. Tapu Ondao Sumasang II, Kav 146, Soroako, 92984, Sul-Sel, Indonesia
WEB :
1. https://duddyarisandi.wordpress.com/author/duddyarisandi/
2. http://www.slideshare.net/DuddyArisandi
3. https://dateknikenterprise.wordpress.com
4. https://drive.google.com/drive/my-drive 5. https://id.linkedin.com/in/ir-duddy-arisandi-st-mt-ba047336
E-mail : 1. duddy_arisandi@yahoo.com
2. arisandi.duddy@yahoo.co.id
3. duddy@ats-sorowako.ac.id
HP : 0811421269
1.2 EDUCATION BACKGROUND
1.2.1.1 2013-2015, Strata-2, Mechanical Production Engineer, FTMD-ITB, Bandung
Institute of Technology, Bandung
1.2.1.2 1996-1999, Strata-1, Mechanical Engineer, Production Technology, FTI-ITB,
Bandung Institute of Technology, Bandung
1.2.1.3 1988-1991, Diploma 3, Maintenance Mechanic, Swiss Project on Polytechnic
(now: Politeknik Manufaktur Bandung), PMS-ITB / Politeknik Manufaktur Bandung
1.2.1.4 1985-1988, 3 Senior High School, Bandung
1.2.1.5 1982-1985, 1 Yunior High School, Cimahi-Bandung
1.3 ON THE JOB TRAINING
1.3.1 1995, On The Job Training for Machine Tools Installation, POLMAN-Timah,
Bangka.
1.3.2 1995, On The Job Training for Maintenance Procedur & Maintenance Control
System, PT PINDAD, Bandung.
1.3.3 1995, Workshop Training in Maintenance System Procedure, PLN Dayeuhkolot,
Bandung.
1.3.4 1995, Monitoring for POLMAN-Bandung Student’s on The Job Training at
Industries (PT Philips Ralin Electronics; PT Astra Daihatsu Motor; PT Pauwels Arya Sada
Trafo Ind.; PT Bukaka Teknik Utama; PT Coca Cola Bottlers; PT Pressindo Hexacipta; PT
Unilever Indonesia; PT Dian Surya Global; PT Honda Federal; PT Tjokro; PT Pasti; PT SCKB;
PT Hyunday; PT Honda Astra Motor, Jakarta-Bogor-Tangerang-Bekasi.
1.3.5 1996, Workshop in Procedure for Repair and Preventive Maintenance,
POLMAN-Bandung, Bandung.
1.3.6 2000, Lecture and Examination for Diploma 4 Student, Observation and
Opportunity for business cooperative with POLMAN-Timah, Bangka.
1.3.7 2000, Evaluate for maintenance training program at PTPN VIII, Jawa Barat.
1.3.8 2001, Visiting for Opportunity of business cooperative at PT INDOCEMENT
Tunggal Tbk, Cibinong, Jawa Barat.
1.3.9 2002, Visiting for Opportunity of business cooperative at PT PERTAMINA
BALONGAN, Indramayu, Jawa Barat
1.3.10 2005, On Site Project Controller for Telkomsel & Erricson Tower for Sumbagut
Area at PT Setia Makmur Cemerlang, Medan
1.4 WORK EXPERIENCE
1.4.1 1991 – 1996, Junior Instructoor for Basic Skill, Intermediate Skill, dan Advanced
Skill Maintenance Technology for D3 Students & Trainee from industries), Jurusan Teknik
Manufaktur, POLMAN-Bandung, Bandung.
1.4.2 1999, Senior Instructor/Supervisor and lecture at Maintenance Eduction
Department, Jurusan Teknik Manufaktur, POLMAN-Bandung, Bandung.
1.4.3 1999 – 2000, Head of Sector Maintenance Education Department, Jurusan Teknik
Manufaktur, POLMAN-Bandung, Bandung.
1.4.4 2000 – 2002, Head of Maintenance Education Department, Jurusan Teknik
Manufaktur POLMAN-Bandung, Bandung.
1.4.5 2000, Member of Senate for STATUTA Evaluation Committee, POLMAN-
Bandung, Bandung.
1.4.6 2000 – 2001, Secretary of Senate Period 2000-2001, POLMAN Bandung,
Bandung.
1.4.7 2001-2003, Head of Development-Planning-and Controlled Program for Director
Project, POLMAN-Bandung, Bandung.
1.4.8 2002, Steering Committee at Self Evaluation’s and National Accreditation for
POLMAN-Bandung, POLMAN-Bandung.
1.4.9 2002-2003, Head of Planning and Controlling Program at Pusat Pelayanan
Masyarakat, POLMAN-Bandung.
1.4.10 2003–2004, Coordinator for Production System Development at Institusional
Development Centre, POLMAN-Bandung.
1.4.11 2004–2005, Operational Director for Tower System, PT Setia Makmur
Cemerlang, Jakarta.
1.4.12 2005-2006, Instructor & Lectur for Preventive Maintenance at Maintenance
Department, Akademi Teknik Soroako, Sulawesi Selatan.
1.4.13 2005–2006, Head of Maintenance Department, Akademi Teknik Soroako,
Sulawesi Selatan.
1.4.14 2005-2007, ISO 9001-2000 Team for Quality Management System, Akademi
Teknik Soroako, Sulawesi Selatan.
1.4.15 2006-2008, Internal Auditor for Quality Management System for ISO 9001:2000,
Akademi Teknik Soroako, Sulawesi Selatan.
1.4.16 2008, Curriculum Team Development, Akademi Teknik Soroako.
1.4.17 2008-2009, Statuta Team Development, Akademi Teknik Soroako.
1.4.18 2008-2009, Head of PPC Department, Akademi Teknik Soroako
1.4.19 2009, Quality Assurance of Education Department, Akademi Teknik Soroako.
1.4.20 2009-2011, Steering Committee at National Acreditation for Akademi Teknik
Soroako .
1.4.21 2009-2013, Steering Committee at Curriculum Development, Akademi Teknik
Soroako.
1.4.22 2009-2013, Head of Study Program Education, Akademi Teknik Soroako
1.4.23 2010, Steering Committe on Director Vote, Akademi Teknik Soroako.
1.4.24 2015, Steering Committee at Curriculum Development, Akademi Teknik
Soroako.
1.5 TRAINING & SEMINAR
1.5.1 1992, Didactic and Methodic for Teacher/Instructor for PMS-ITB Instructoor &
Trainess from Philipines, PMS-ITB, Bandung.
1.5.2 1992, FESTO Didactic Seminar E311 (Introduction for Programmable Logic
Controller), PT FESTO, Jakarta.
1.5.3 1993, CNC Training System for CNC Lathe and Milling Machine, PMS-ITB,
Bandung.
1.5.4 1993, Introduction to Electro Pneumatic Training, PMS-ITB, Bandung.
1.5.5 1995, Modern Maintenance Management Seminar, PT PINDAD, Bandung.
1.5.6 1996, Introduction to ISO 9000, POLMAN-Bandung, Bandung.
1.5.7 1996, Maintenance Management Course, Swiss Contact-POLMAN-Bandung,
Bandung.
1.5.8 1999, Budgeting for Technician Accounting & Academic Supervisor Seminar,
POLMAN-Bandung, Bandung.
1.5.9 2000, Non-Contact Vibration Measurement and Application on Portable Pulse-
Modal Analysis, PT Ometron, Jakarta.
1.5.10 2000, Maintenance Control CNC Fanuc Serie 0/00/0 Mate, POLMAN-Bandung,
Bandung.
1.5.11 2000, Pengatur muda TK1 (II/B), Institut Teknologi Bandung, Bandung
1.5.12 2001, Visual Manufacturing Software Analisys, PT ERP MULTISOLUSI
INDONESIA, Bandung.
1.5.13 2001, Environment-Healty-Safety, PT Schlumberger Indonesia, Bandung.
1.5.14 2003, Indonesian Manufacture for Facing AFTA-2003, POLMAN-Bandung,
Bandung.
1.5.15 2003, Accounting and Costing Performance, POLMAN-Bandung, Bandung.
1.5.16 2003, Seminar for Internal Evaluating and Monitoring, DIKTI-Depdiknas,
Bandung.
1.5.17 2004, Manufacturing Technology Show Case 2004, POLMAN-Bandung,
Bandung.
1.5.18 2005, Quality Management System for ISO 9001:2000, ATMI-Akademi Teknik
Soroako, Sulawesi Selatan.
1.5.19 2005, Internal Audit for Quality Management System ISO 9001-2000, ATMI-
Akademi Teknik Soroako, Sulawesi Selatan
1.5.20 2007, Natioanal Acreditation for Education, Kopertis Wilayah IX, Makasar.
1.5.21 2007, Indonesian Engineer Association, PII-PT Inco, Soroako.
1.5.22 2007, Job Safety Analysis, PT-Inco, Soroako.
1.5.23 2007, Skill of Instructional Teaching (PEKERTI), Kopertis Wilayah IX, Palopo.
1.5.24 2007, Educational Development and health organization, Akademi Teknik
Soroako, Soroako.
1.5.25 2008, The Internal Audit Training for Quality Management System, TUV
Rheinland, Soroko.
1.5.26 2008, Emotional-Spiritual Quotient, ESQ Leadership Center-YPS-PT Inco,
Soroako.
1.5.27 2008, Microsoft Project and Server 2003, Andalan Nusantara Teknologi, Soroako
1.5.28 2008, Self Evaluation in Higher Education, Akademi Teknik Soroako, Soroako
1.5.29 2009, Eight Behaviour of Active Supervision, PT Inco, Soroako
1.5.30 2009, Applied Approach, Kopertis Wilayah IX, Akademi Teknik Soroako.
1.5.31 2009, UKMM-Solve for create new vacancy, Akademi Teknik Soroko, Soroako
1.5.32 2009, The Awareness training for Quality Management System, TUV Rheinland,
Soroako
1.5.33 2010, Workplace Assessor, PT Inco, Soroako
1.5.34 2010, Instrument filling for accreditation of Program Studi, Akademi Teknik
Soroako, Soroako
1.5.35 2012, Health and Safety (HS/K3), Akademi Teknik Soroako, Soroako
1.5.36 2012, Health and Safety in Workplace, PT Jamsostek & Surveyor Indonesia,
Palopo
1.5.37 2015, Challenges Application of Mechanical Engineering Science for Asean
Economic Community in 2015-SNTTM-XIV, BKS-TM Indonesia, Universitas Lambung
Mangkurat, Banjarsarin
1.6 OTHERS EXPERIENCE
1.6.1 CONSULTANT
1.6.1.1 1995, Maintenance Control System Installation at PT PINDAD, PT Hexacon
Jakarta.
1.6.1.2 2001, Optimising of Production Process at PT ARHAPRO, Dapati Project-DIKTI,
Tangerang.
1.6.2 ENGINEERING RESEARCH
1.6.2.1 1993, Members of Tools Designer for Machine Tools Calibration for POLMAN-
Timah-Bangka, POLMAN Bandung, Bandung.
1.6.2.2 1993, Head Project for Alignment Media Designing for POLMAN-Timah,
POLMAN Bandung, Bandung.
1.6.2.3 1994, Factors That Influence Steam Turbine Alignment, Gigih S. / D3-Student &
Duddy Arisandi, Polman-Bandung, Bandung
1.6.2.4 1995, Implementation Hand Tools Practice Program at Polman-Timah, A.
Wahyu P. / D3 Student & Duddy Arisandi, Polman-Bandung, Bandung
1.6.2.5 1995, Spot Welding Machine Maintenance on Maintenance Section III in PT
Honda Inc. Jakarta, Joko Mulyoto/D3-Student & Duddy Arisandi, Polman-Bandung, Bandung
1.6.2.6 1995, Head Project for FAG-Bearing Kit Making for POLMAN-Timah,
POLMAN-Bandung, Bandung.
1.6.2.7 1996, Steering Committee for Decision Machine Tools Spesification at
Polytechnic Bangkinang, POLMAN-Bandung, Bandung.
1.6.2.8 1998–1999, Analyst for Production Based Education at POLMAN Bandung, ITB,
Bandung.
1.6.2.9 1999, Analysis and Improvement Maintenance System To Decrease Cost and
Increase Productivity in Suzuki Main Dealer Workshop-Four Wheel, M. Jufri Dullah/D4-Student
& Duddy Arisandi, Polman-Bandung, Bandung
1.6.2.10 2000, Design and Manufacture Portable Hydraulic Handpress in Polman (Edi C.,
Eka R., Harjanto, Handrizal / D3-Studenst & Duddy Arisandi, Polman Bandung, Bandung
1.6.2.11 2000, Design and Manufacturing vibrations Detector for Industry Machinery for
Machine Repair Plan, Djatnika, Nino H., Citra S., Satrio R. Rudy S. / D3-Students & Duddy
Arisandi, Polman Bandung, Bandung
1.6.2.12 2001, Optimization of Hydraulic Hand Press, Yofi AC., Herman BH., Rinaldi,
Tatang S. / D3-Students & Duddy Arisandi, Polman Bandung, Bandung
1.6.2.13 2001, Design and Manufacturing Universal Table for Testing Media for Vibration
Caused by Two Shaft Miss-alignment in P2M Laboratory Polman-Bandung, Cepi M.H. / D4
Student & Duddy Arisandi, Polman Bandung, Bandung
1.6.2.14 2001, Analysis of Turning Work Center in Production Laboratory in
Manufacturing Engineering Department for Planing and Monitoring Load Production Capacity,
Arthur KH. / D4 Student, Ali Suparman, and Duddy Arisandi, Polman Bandung, Bandung
1.6.2.15 2001, Analysis of Machine Tools Component Based On Identification of
Frequency Signal, Jasman / D4 Student, Suharyadi P., and Duddy Arisandi, Polman Bandung,
Bandung
1.6.2.16 2001, Analysis Production Schedule Making Based on Machine Load and
Capacity at Balai Karya Mekanik PT Timah Bangka Tbk., Bustari E. / D4 Student, Wibawa K.,
and Duddy Arisandi, Polman bandung, Bandung
1.6.2.17 2001, Student Supervisor for Robotic Modelling for Education and Training
Invitation, Bolo Dwiartomo and Duddy Arisandi, POLMAN-Bandung, Bandung.
1.6.2.18 2001–2002, Head Project of PICCOLO Turning Making Machines, POLMAN
Bandung, Bandung.
1.6.2.19 2002, Wood Profile Combination Machine, Anton Indra G., Ardy S., Mahar B.,
stephen A. / D3 Students & Duddy Arisandi, Polman Bandung, Bandung.
1.6.2.20 2002, Design and Manufacture Sinus Table-Dual Axial, Bugie W., Hery A.,
Jeffry O., Lucky S, Tedi G. / D3 Students & Duddy Arisandi, Polman Bandung, Bandung
1.6.2.21 2003, Construction Modification for Alignment Media Practice in Akademi
Teknik Soroako, Abdul Rahmat, Beny H. / D3 Students & Duddy Arisandi, Polman-Bandung,
Bandung
1.6.2.22 2003, Design and Manufacture Sows Seed, Puthut, Ponimin / D3 Students &
Duddy Arisandi, Polman-Bandung, Bandung.
1.6.2.23 2003, Design and Setting Production Line for Differential Case Machining
Production at PT Mitsumishi Kramayudha Motor, Auliya, Daud Kai Rizal, Dudi A., Wikan Z.,
Wishnu / D3 Students & Duddy Arisandi, Polman Bandung, Bandung
1.6.2.24 2003, Step Guide for Bending Plate, Komarudin, Agus R. / D3 Students & Duddy
Arisandi, Polman Bandung, Bandung
1.6.2.25 2003, Cost Analysis for Assembling Order in Manufacturing Division Polman-
Bandung, Ari Abadi / D4 Student & Duddy Arisandi, Polman Bandung, Bandung
1.6.2.26 2003, Determination of Design Cost Based on Design Process and Person
Qualification, Rizal / D4 Student & Duddy Arisandi, Polman Bandung, Bandung
1.6.2.27 2003, Actual Production Cost Analysis for Components Order, Bagus Heri / D4
Student & Duddy Arisandi, Polman Bandung, Bandung
1.6.2.28 2003, Milling Work Center Analysis in Production Workshop in Manufacture
Division Polman-Bandung (Rahmat Hidayat / D4 Student & Duddy Arisandi, Polman Bandung,
Bandung
1.6.2.29 2003, Evaluation of Lead Time, Inventory, Utilization, and Schedule Performance
in Pattern, Mould, and Core Sub Division in Foundry Division Polman Bandung, Somawardi /
D4 Student & Duddy Arisandi, Polman-Bandung, Bandung
1.6.2.30 2003, Evaluation of Lead Time, Inventory, Utilization, and Schedule Performance
in Foundry Workshop in Polman Bandung (M. Izwar / D4 Student & Duddy Arisandi, Polman-
Bandung, Bandung
1.6.2.31 2003, Design of “Sleeve Side” Hot Press Machine, Bustami Ibrahim / D4 Student
& Duddy Arisandi, Polman Bandung, Bandung
1.6.2.32 2003, Turning Machine and Sparepart Database Making for Anual Maintenace
Cost and Budgeting in UPT Pemeliharaan dan Perbaikan Mesin Polman Bandung, R. Rudi
Suharyo / D4 Student, Agus Widarsa & Duddy Arisandi, Polman-Bandung, Bandung
1.6.2.33 2004, Measuring and Analysis Product Defect, Muhammad Padang / D4 Student
& Duddy Arisandi, Polman Bandung, Bandung
1.6.2.34 2006, Design and manufacture Manual Bending Machine (Sukirman, Firman A.,
Nober Tato K., Yuanitha K., Herwin S., Syahril /D3 Student, Duddy Arisandi, Akademi Teknik
Soroako, Soroako
1.6.2.35 2007, Design and Manufacture for Vise and Clamping, Harun / D3 Student,
Duddy Arisandi and Ichsan Ristiawan, Akademi Teknik Soroako, Soroako
1.6.2.36 2007, Design and Manufacture Jig Saw / Scroll Saw, Esra T, Rahmat Hidayat /
D3 Students, Duddy Arisandi and Ichsan Ristiawan, Akademi Teknik Soroako, Soroako
1.6.2.37 2008, Design and Manufactur Shear Cutting Machine with Manual Hand Shear,
Agus Salim, Masidul / D3 Students & Duddy Arisandi, Akademi Teknik Soroako, Soroako
1.6.2.38 2008, Design for Tempe Slicing Machine, Dita HD / D3 Student & Duddy
Arisandi, Akademi Teknik Soroako, Soroako
1.6.2.39 2009, Machine for Cleave Coconut Shell and Separating Coconut Meat, Andi
Sudirman, M. Fadli B., Marsal, Fuad H., Fitriani / D3 Students, Duddy Arisandi, Simon Pareke,
Dani Setiawan, Akademi Teknik Soroako, Soroako
1.6.2.40 2010, Design and Manufacture Gear alignment and Optical Alignment, Novi A.,
Roy Simon, Fiqhi R., M. Imron, Mardianto T., Fitri Sari, Tajuddin /D3 Students, Duddy
Arisandi, Harjuma, Sabil, Akademi Teknik Soroako, Soroako
1.6.2.41 2011, Design and Manufacture Simple Bending Test Machine, Aan Nugraha,
Syainal Abidin, Fajria Fahmi, Imanuel Malino, Ishak Panompo / D3 Students, Duddy Arisandi,
Simon Pareke, Fitriana Firdaus, Akademi Teknik Soroako, Soroako
1.6.2.42 2011, Design and Manufacture Equipment Test For Journal Bearing and Their
Lubricate System, Hamrun, J. Pasomba, Eva Sofiana, Lukius, Lukman / D3 Students, Duddy
Arisandi, Dani Setiawan, Ichsan Ristiawan, Akademi Teknik Soroako, Soroako
1.6.2.43 2012, Design and Manufature Turning Machine Tools for Spiral Motive Product ,
Hadi W., Justi Konda, Asdan, Ardi Sahputra, Asrul arifin / D3 Students, Duddy Arisandi, Ichsan
Ristiaawan, Akademi Teknik Soroako, Soroako
1.6.2.44 2012, Design and Manufacture Tensile Test Machine for Arc and Gas Welding
Product, Haniel S.T., Kasril, Amri, Supatmi, Jefri A.P. / D3 Students, Duddy Arisandi, Marthin
Randan, Akademi Teknik Soroako, Soroako
1.6.2.45 2013, Design and Manufacture Ergonomic Engine Mounting, Karno, M. Assyidik
A., Rini M., Adriansyah, Faisal Nuralim / D3 Students, Mastam M., Duddy Arisandi, Kartiny
Taslim, Akademi Teknik Soroako, Soroako.
1.6.2.46 2013, Design and Manufacture Drain, Filter, and Coolant Fill Portable Machine,
M. Asfiar T., Sartika, Hartini K., M. Fitrah, Shuardi S. / D3 Students, Jasman, Zulkarnain A.,
Duddy Arisandi, Akademi Teknik Soroako, Soroako
1.6.2.47 2013, Optimation of Turning Machine for Spiral Motive by Electric Power
(Supriyandi, Suryo P., Yehiel B., Hilal A., Zulva S. / D3 Students, Sirama, Ichsan R., Duddy
Arisandi, Akademi Teknik Soroako, Soroako
1.6.2.48 2014, Curriculum Evaluation and Development Based on Competency Based
(case studi : ATS-Curriculum 2007)
1.6.2.50 2015, Feature Based Product Design, Manufacture, and Inspection, Proceeding
Seminar Nasional Tahunan Teknik Mesin / SNTTM-XIV, Indra Djodikusumo, Duddy Arisandi,
Ruswandi, Universitas Lambung Mangkurat, Banjarmasin
1.6.2.51 2015, Power Transmission AlternativeDesign From Propeller Turbine to Shaft
Generator Using TRIZ, Proceeding Seminar Nasional Tahunan Teknik Mesin / SNTTM-XIV,
Indra Djodikusumo, Fachri Koeshardono, Iwan Sanjaya Awaludin, Duddy Arisandi, Ruswandi,
Universitas Lambung Mangkurat, Banjarmasin.
1.6.2.52 2015, Feature based Five Axes CNC Programming for Runner Manufacturing
of Propeller Turbine, Seminar Nasional Tahunan Teknik Mesin / SNTTM-XIV, Indra
Djodikusumo, Ruswandi, Duddy Arisandi, Universitas Lambung Mangkurat, Banjarmasin.
1.6.2.53 2015, Improvement for The Quality of Final Examination of Product Student
(Design, Manufactur, or Reverse Engineering) Through Improve The Quality of Engineering
Drawing, IRONS6th Industrial Research Workshop and National Seminar, Duddy Arisandi,
Ruswandi, Politeknik Negeri Bandung, Bandung.
1.6.2.54 2015, Feature based Reverse engineering Using Geomagic Design-X Software-
Case Study of Engine Block Model 465Q, Duddy Arisandi / FTMD-ITB Student & Indra
Djodikusumo, FTMD-ITB, Bandung
1.6.2.55 2016, Setting up The Technology Adaptation Through Understanding of Process
and Human Resources Competency Preparation, SENIATI 2016 Green Technology Innovation,
Duddy Arisandi, FTI-ITN Malang, Malang.
1.6.3 PRESENTER / KEY NOTE SPEAKER
1.6.3.1 1995, Workshop training for Educational System, PT United Can Company,
Jakarta.
1.6.3.2 1999, Workshop for Production Planning and Control, POLMAN Bandung,
Bandung.
1.6.3.3 2000, Bench Marking Maintenance Program for Indonesian Polytechnic
Instructor, EEDP, POLMAN Bandung.
1.6.3.4 2001, Study Conference on Production Based Education System for GOTEVOT-
ARAB, POLMAN-Bandung, Bandung.
1.6.3.5 2003, SMESCO Festival (Reduction Production Cost Through Maintenance
Activity, Swiss Contact), Swiss Contact, Jakarta.
1.6.3.6 2003, Indonesian Manufacture for Facing AFTA-2003 (Predictive Maintenance),
POLMAN-Bandung, Bandung.
1.6.3.7 2003, Product Development Strategyc for Manufacturing Industries (Jakarta
Conventional Center), Swiss Contact – Bds Provider, Jakarta.
1.6.3.8 2004, Manufacturing Technology Show Case 2004 (Moderator for Enterprise
Resource Planning), POLMAN-Bandung, Bandung.
1.6.3.9 2008, Campaigner for Energy Conservation at YPS-PTI (Campaigner),
Toastmaster International-PTI, Soroako
1.6.3.10 2010, Peningkatan Ketrampilan Dasar Teknik Instruksional (PEKERTI) &
Applied Approach (AA), Akademi Teknik Soroako, Soroako.
1.6.3.11 2015, Reverse Engineering, PLN & FTMD-ITB, Pusharlis PLN-Bandung,
1.6.3.12 2016, Reverse Engineering, PLN & FTMD, Pusharlis PLN-Bandung
1.6.4 COMMETTEE
1.6.4.1 1994,1995,1996, 2000, Entrance D3KT Student Test & D3 Examination Test,
POLMAN-Bandung, Bandung.
1.6.4.2 1995, ITB of Creation and dedication for Exhibition, Stand Officer, Institut
Teknologi Bandung, Bandung.
1.6.4.3 1999, Choice for POLMAN-Bandung Director, Senat Member, POLMAN-
Bandung, Bandung.
1.6.4.4 2000, Planner for maintenance apprentices syllabus for GULF Indonesia
Resources, POLMAN-Bandung, Bandung.
1.6.4.5 2000, Choise for Head of Manufacturing Technology Major Program, Member,
POLMAN-Bandung, Bandung.
1.6.4.6 2000, Auction and Provisioning for Tools and Maintenance for 2000 year
of budgeting, Member, POLMAN-Bandung, Bandung.
1.6.4.7 2000, Proposal Planner for Technological and Professional Skill Development
Sector Project (TPSDP), Members, POLMAN-Bandung, Bandung.
1.6.4.8 2000, Relevance Increasing for Higher Technical Education (Fund-Prf Relevancy
Program), Member, POLMAN-Bandung, Bandung.
1.6.4.9 2000, Establishing for New Studi Program of Manufacturing Information
Technology (MIT for JICA Program), Member, POLMAN-Bandung, Bandung.
1.6.4.10 2000, Engineering for Making and Modification and Overhaul Positive
Displacement Pump (P5 Wax Plant Pertamina UP-V Balikpapan), Member, POLMAN-
Bandung, Bandung.
1.6.4.11 2001, Proposal Planner for Indonesian German Institute Project, POLMAN-
Bandung, Bandung.
1.6.4.12 2002, Planner for POLMAN-Bandung Curriculum 2002, Member, POLMAN-
Bandung, Bandung.
1.6.4.13 2002, Proposal Planner for JICA Program (Indonesia-Japan), Member,
POLMAN-Bandung, Bandung.
1.6.4.14 2004, Manufacturing Program Planning for 2004 year budgeting, Coordinator
Manufacturing Major Program, POLMAN Bandung, Bandung.
1.6.4.15 2007, Curriculum Improvement Committee, Member, Akademi Teknik Soroako,
Soroako
1.6.4.16 2010, Choice for Akademi Teknik Soroako Director, Secretary commitee,
Akademi Teknik Soroako.
1.6.4.17 2010, Curriculum Improvement Committee, Evaluator, Akademi Teknik Soroako,
Soroako
1.6.4.18 2009-2013, Members of Senat Akademi Teknik Soroako
1.6.4.19 2016, Curriculum Improvemnet Committee, Evaluator, Yayasan Pendidikan
Soroako & Akademi Teknik Soroako.
1.6.5 AUTHOR AND TRANSLATOR
1.6.5.1 1992, Arisandi Duddy, Maintenance for Technician (Translator), Industrial
Training Board-Australia, POLMAN-Bandung, Bandung.
1.6.5.2 1992-1993, Arisandi Duddy., Theory of Antifriction Bearing., POLMAN-
Bandung, Bandung.
1.6.5.3 1992-1993, Arisandi Duddy., Practical of Mounting and Dismounting for
Antifriction Bearing., POLMAN-Bandung, Bandung.
1.6.5.4 1993-1994, Arisandi Duddy., Theory of Mechanical Drive Alignment., POLMAN
Bandung, Bandung.
1.6.5.5 1993-1994, Arisandi Duddy., Practical for Mechanical Drive Alignment.,
POLMAN-Bandung, Bandung.
1.6.5.6 1993-1994, Arisandi Duddy., Theory of Hand Tools and Power Tools.,
POLMAN-Bandung, Bandung.
1.6.5.7 1993-1994, Arisandi Duddy & UC Suyono., Practical for Hand Tools and Power
Tools User., POLMAN-Bandung, Bandung.
1.6.5.8 1995, Arisandi Duddy., Theory of Machine Tools Callibration., POLMAN-
Bandung, Bandung.
1.6.5.9 1995, Arisandi Duddy., Practical for Machine Tools Callibration (Draft & not yet
publication).
1.6.5.10 1995, MH Cepi, MZ Darman, Arisandi Duddy, Priambodo Kukuh., Maintenance
Management for Indonesian Polytechnic., POLMAN-Bandung & Swiss Contact., Bandung.
1.6.5.11 2001, Duddy Arisandi., Introduce of Production Planning and Control for D4
Student D4 (Load Oriented Order Release)., POLMAN-Bandung., Bandung.
1.6.5.13 2010, Arisandi Duddy, Buku Ajar Perencanaan dan Pengendalian Produksi,
Akademi Teknik Soroako, Soroako.
1.6.6 LECTURE / TEACHER / INSTRUCTOR (D3 & D4 STUDENT at
POLMAN-Bandung & Akademi Teknik Soroako)
1.6.6.1 1991–1996 & 1999–2004, Polman-Bandung, Total: 170,5 SKS (Credit of
Semester), 73 Event
Manufacturing technology, Hand Scraping, Maintenance and Repair, Machine Tools
Calibration, Mechanical Drive Alignment, Mounting and Dismounting Bearing, Preventive
maintenance, Hand Tools, Machine Elements, Mechanic of Material, Strength of Material, Basic
of Machine Construction, Industrial Metrology, Theory and Practical approach for Statistic,
Statistic Quality Control, Calculus, Engineering Mathematic, Preventive Maintenance
Management, Predictive Maintenance Management, Maintenance Management, Production
Management, Production Planning & Control, Lubricate and Lubrication, Machine Tools
Repair, Machine Tools Making, Hand and Power Tools, Pump and Installation, Compressor and
Installation, Engine Maintenance, Fabrication and Production, Manufacturing Advanced
Technology.
1.6.6.2 2005–Now, Akademi Teknik Soroako, Total: – 150 SKS (Credit of Semester),
73 Event
Theory and Practice of Bearing, Mechanical Drive Alignment, Lubricate and Lubrication,
Component Making and Repair, Pump and Installation, Preventive Maintenance Management,
Production Planning and Control, Machine Repair and maintenance, Machine making, Design
Methodology, Machine Technical Drawing, Basic Engineering Drawing.
1.6.7 CONSELOR FOR END FINAL PROJECT (D3 & D4 STUDENT at
POLMAN-Bandung, D3 STUDENT from UPI, D3 STUDENT from LPPA, S1
STUDENT from Univ. Widyatama, S1 & S2 STUDENT from ITB, S2
STUDENT from UNPAD, and D3 for Akademi Teknik Soroako Student)
1.6.7.1 1991–1996 & 1999–2004 & 2006-Now, Total: 140 SKS (Credit of Semester), -
47 Title
Maintenance Management, Production Planning & Control, Production Management, Cost
Accounting, Information System, Integrated System at Manufacturing System, Quality
Assurance, Design & Production of Product, Machine Tools Repair, Component Making,
Machine Tools Design and Making, Laser system tools for mechanical drive alignment.
Technology Concept (Antek-1), Geometric Dimensioning & Tolerancing, Reverse Engineering
1.6.8 MODERATOR & EXAMINER for FINAL PROJECT (D3 & D4
STUDENT at POLMAN-Bandung & Akademi Teknik Soroako)
1991–1996 & 1999–2004 & 2006-Now, Total: 19 SKS (Credit of Semester), 73
1.6.8.1 1994, Alignment Steam Turbine, Gigih / D3 Student, Politeknik Manufaktur
Bandung, Bandung.
1.6.8.2 1994, Coupling Alignment, Ishak Pammu / D3 Student, Politeknik Manufaktur
Bandung, Bandung.
1.6.8.3 1994, Knowing The Functional and Main Part Turning Machine Maintenance,
Marthin Randan / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.4 1994, An Effort to Implementation Preventive Maintenance for Turning Machine
at ISTC Soroako, Hendra / D3 Student, Politeknik Manufaktur Bandung, Bandung.
1.6.8.5 1994, Preventive Maintenance Procedure for Machine at ATS-ISTC, Sirama / D3
Student, Politeknik Manufaktur Bandung.
1.6.8.6 1994, Maintenance Process for Relief Valve Francis Turbine in PLTA Ubrug
Sukabumi, Yofi / D3 Student, Politeknik Manufaktur Bandung
1.6.8.7 1995, Implementation of Hand Tools Practical Program at Polman Timah, D3
Student, Politeknik Manufaktur Bandung.
1.6.8.8 1995, Daily and Monthly Maintenance for Type SLP35 Spot Welding at III
Maintenance Section in PT Honda Federal Inc. Jakarta, Joko M. / D3 Student, Politeknik
Manufaktur Bandung.
1.6.8.9 1995, Tools for Lifting Workpiece (Spindle Seat) at Drill & Mill Machine,
Petrosian S. / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.10 1995, Machine Maintenance Procedure in PT Oriental Asahy Liman, M. Sadiyo /
D3 Student, Politeknik Manufaktur Bandung.
1.6.8.11 1995, Machine Felts Maintenance in Palm Oil Mill Bah Jambi PT Perkebunan
Nusantara VIII, Pangaloan Sibuea / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.12 1995, Preventive Maintenance System in Kettle Stew (Sterilizer) in PTP VII Bah
Jambi, D3 Student, Politeknik Manufaktur Bandung.
1.6.8.13 1995, Fixture for Grill Opening Position Air Conditioned Tunel A for Garbarata
CA003-Changi Project, Arvieno H. / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.14 1995, Preventive Maintenance for Core Dryer in PTP VII Gunung Bayu, Juara
Gultom / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.15 1995, Otomation for Deburing Safety Seat, D3 Student, Politeknik Manufaktur
Bandung.
1.6.8.16 1995, Machine Numbering System at PT SCKB, M. Nasirullah / D3 Student,
Politeknik Manufaktur Bandung.
1.6.8.17 1995, Preventive Maintenance Implementation in Shop & Component Division at
PT Bukaka Teknik Utama, Politeknik Manufaktur Bandung.
1.6.8.18 1995, Sadle Crane Assembly at PT Bukaka Teknik Utama, D3 Student, Politeknik
Manufaktur Bandung.
1.6.8.19 1996, Pierching and Embossing Panel Quarter Right/Left (900x800x400mm) at
PT Stallion, Helful / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.20 1996, Scoring System for Mecanical Engineering Drawing at Polman Timah,
Sugianto / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.21 1996, Assembly Process for Turn Over Unit, Andreas Sihono / D3 Student,
Politeknik Manufaktur Bandung.
1.6.8.22 1996, Improvement for Tool Store Coordination at PT Coca Cola Botler Amatil
Jakarta, Eko M. Arifin / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.23 1996, Otomation Planning for Rotary Table at Painting Unit/Gun Division at PT
PINDAD Persero Bandung, Tedi Belarosa / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.24 1996, The Useful of Tools and Measuring Tools Storage and Manage at PT Coca
Cola Amatil Jakarta, Dionisius KS / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.25 1996, Tunnel Garbarata Component Order Procedure at PPC PT Bukaka Teknik
Utama, Aris M. / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.26 1996, Improvement The Work Effectiveness Through Training and Development
Program at PT Honda Federal Inc., Farian R. / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.27 1996, Tunnel Roller Adjustment for Garbarata Product at PT Bukaka Teknik
Utama, Basuki Indra / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.28 1996, Manifold MB 700 Checking Fixture Making at PT Presindo Hexacipta,
Iwan Bastian / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.29 1996, Extended Long Live Catoda in Zink Acid Coating at Surface & Heat
Treatment Department in PT PINDAD Persero, Pujiatmiko / D3 Student, Politeknik Manufaktur
Bandung.
1.6.8.30 1996, Tail Stock Urano Turning Machine Making at PT Bukaka Forging
Industries, Ali Faizin / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.31 1996, Schotman Machine - Hydraulic System Solve Problem at PT Labtech
Penta International, Ahmad Fauzan / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.32 1996, Gearbox Contruction for Workpiece Mounting in Buffering Machine, Jaya
J. / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.33 1996, Cutting Shearing Machine Proventive Maintenance at Steel Tower
Division, Hymsyar Nainggolan / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.34 1996, Work Instruction & Standard Time for Luminaire Assembling in
Assembling Unit at PT Phyllips Ralin Electronic Jakarta, Eri Munandar / D3 Student, Politeknik
Manufaktur Bandung.
1.6.8.35 1996, Personal Criteria at Technical Design Division in PT Labtech Penta
International, Zulbahri / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.36 1996, Clamping system for Loading Technology in Brass Forging Process (Valve
Product Otomation), Eri Gumilar / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.37 1996, Belt Conveyor Maintenance Evaluation for Walls Ice Cream Transfer at PT
Unilever Indonesia, Didik Purwanto / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.38 1996, Hard Chrome Plating for Collector Bearing Bore Repair at Allison 250C-
20 Machine in Universal Maintenance Center Division PT IPTN, Christofel NM / D3 Student,
Politeknik Manufaktur Bandung.
1.6.8.39 1996, The Importance of Inspection and Lubricating Schedule of Production
Machinery, Willy S. / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.40 1996, Preventive and Repair of Keyways Failure of Hydraulic Shaft Oil Pump of
Turning CNC Cincom F12 Machine at PT PINDAD, Kodiron / D3 Student, Politeknik
Manufaktur Bandung.
1.6.8.41, 1996, The Goal of Maintenance of Machine at Finishing Department in PT Dian
Surya Global Tangerang, Dedi H. / D3 Student, Politeknik Manufaktur Bandung.
1.8.42, 1996, Thermo Spray Technology for Repairing Aeroplane Component at UMC-
PT IPTN Bandung, Fendy Murphy / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.43 1996, Material Cutting Time Standard Making at Cutting Shop PT Bukaka
Forging Industries Bogor, Tito G. / D3 Student, Politeknik Manufaktur Bandung.
1.6.8.44 2000, Soybean Process Tools Modification in Tempe Industry, Abdul W., Andi
A., Andri R., Lucky L., Samudro S. / D3 Students, Politeknik Manufaktur Bandung.
1.6.8.45 2000, Heat Treatment Machine Design, Doni W., Sobari, Widi N., Farid A., Arif
W. / D3 Students, Politeknik Manufaktur Bandung.
1.6.8.46 2000, Mold Ventury Pipe Analyze and Design Modification doe to Product
Problem, D3 Students, Politeknik Manufaktur Bandung.
1.6.8.47 2000, Analyze and Problem Solving at Fuel Filter Painting Process in PT SS,
Andi F., Angga P., Sigit P., Eko P., Ressy A. / D3 Students, Politeknik Manufaktur Bandung.
1.6.8.48 2000, Pin Pre Assembling for Teen Scene, Ahmad I.R., Indra B., Rais R., Irfan F.
/ D3 Students, Politeknik Manufaktur Bandung.
1.6.8.49 2000, Design and Manufacturing for Hydraulic Handpress, Edi C., Eka R.,
Harjanto, Handrizal K. / D3 Students, Politeknik Manufaktur Bandung.
1.6.8.50 2000, Boring Process Design for Semi-Automatic Onion Slicer Type KS-905,
Alex H., Asep H., Ganjar M., Muhidin / D3 Students, Politeknik Manufaktur Bandung.
1.6.8.51 2001, Retainer Lock Press M/C Modification, D3 Students, Politeknik
Manufaktur Bandung.
1.6.8.52 2001, ASM Robot Redesign and Simulation, D3 Students, Politeknik Manufaktur
Bandung.
1.6.8.53 2001, Production Planning and Control Evaluation at ATMI Surakarta and
Suggestion for Improvement, R. Priyoko / D4 Student, Politeknik Manufaktur Bandung.
1.6.8.54 2001, Design for Dynamic Tensile Strength Machine and Manufacturing Holder
Part, Rusdi Nur / D4 Student, Politeknik Manufaktur Bandung
1.6.8.55 2001, Turning Work Center Analysis at Production Laboratory Jurusan Teknik
Manufaktur, Arthur Halik R. / D4 Student, Politeknik Manufaktur Bandung.
1.6.8.56 2001, The Effect of Reduction Grade to Wire Pull Force in Cold Process,
Mechanical Properties, and Micro Structure, Jamhari / D4 Student, Politeknik Manufaktur
Bandung.
1.6.8.57 2002, Design and Manufacturing of Quenching Media Container With Propeller
Agitator, Ahmad Yusuf, Deden W., R. Ade, Ricky P. / D3 Students, Politeknik Manufaktur
Bandung
1.6.8.58 2002, Polishing Machine Using Kinematic Motion System, Agus H., Eko N., M.
Maulana, Ria Y., Novia / D3 Students, Politeknik Manufaktur Bandung.
1.6.8.59 2002, Combination Machine for Wood Profile, Abdi S., Andreas F., Freddy P.B.,
Indah R., Maya S. / D3 Students, Politeknik Manufaktur Bandung.
1.6.8.60 2003, Perfecting of ASM EAEO 1e Robot Implementation, D3 Students,
Politeknik Manufaktur Bandung.
1.6.8.61 2003, Lubrication System for Journal Bearing Media, Antonius Adi / D4 Student,
Politeknik Manufaktur Bandung.
1.6.8.62 2003, Overhaul Steps for Schaublin 53 N Milling Machine, D3 Students,
Politeknik Manufaktur Bandung.
1.6.8.63 2003, Line Production Design and Making for FE 347/477 and FE 349
Differential Case Macining in MKM, Daud K.R., Dudi, Wikan, Wisnu / D3 Students, Politeknik
Manufaktur Bandung.
1.6.8.64 2003, Milling Work Center Analysis at Production Laboratory Jurusan Teknik
Manufaktur, Rahmat Hidayat / D4 Student, Politeknik Manufaktur Bandung.
1.6.8.65 2003, Design and Manufacturing of Seed Spreader, Puthut, Ponimin / D3
Students, Politeknik Manufaktur Bandung.
1.6.8.66 2003, Step Guide for Bending Plate, Komarudin, Agus R. / D3 Studtents,
Politeknik Manufaktur Bandung.
1.6.8.67 2003, Evaluation of Lead Time, Inventory, Schedule Performance, and Utilization
for Foundry Production Laboratory, M. Iswar / D4 Student, Politeknik Manufaktur Bandung.
1.6.8.68 2003, Assembling Price Order Analysis in Mechanical Department, Ari Abadi /
D4 Student, Politeknik Manufaktur Bandung.
1.6.8.69 2003, Machining Component Order Price Analysis in 2002 Year, Bagus Heri / D4
Student, Politeknik Manufaktur Bandung.
1.6.8.70 2003, Evaluation of Lead Time, Inventory, Schedule Performance, and Utilization
for Pattern and Core Workshop in Foundry Production Laboratory, Somawardi / D4 Student,
Politeknik Manufaktur Bandung.
1.6.8.71 2004, Geometrical Test for Aciera F3 Milling Machine, A.S.D.R. Amaral / D4
Student, Politeknik Manufaktur Bandung.
1.6.8.72 2004, Turning Machine Data Based & Component Making for Budgeting in
Maintenance Cost at UPT P2M, R. Rudi Suharyo / D4 Student, Politeknik Manufaktur Bandung.
1.6.9 ENGINEERING & PRODUCTION SYSTEM at (POLMAN-Bandung)
1.6.9.1 1991–1996 & 1999–2004, Total: 39 Event
Maintenance Management, Production Planning & Control, Production Management, Cost
Accounting, Information System, Quality Assurance, Design & Production of Product, Machine
Tools Repair, Component Making.
1.6.10 TRAINER (POLMAN-Bandung & Akademi Teknik Soroako)
1.6.10.1 1991–1996 & 1999–2004 & 2006-Now, Total: 65 Event (5,500 hours)
Maintenance Management, Production Planning & Control, Production Management, Cost
Accounting, Information System, Quality Assurance, Design & Production of Product, Machine
Tools Repair, Component Making, Basic Maintenance Skill, Intermediate Maintenance Skill,
Advanced Maintenance Skill
Trainee comes from: PTP XIII Nusantara, ISTC, PT Jembo Cable, PT Inti Pantja Press Industries, PT Semen Padang,
PT Media Abdi Prima, PTP VII Bah Jambi, PT Siemens Cable Optic, PT Ekatama Ratna
Persada, PT Tambang Timah, PT Astra Daihatsu Motor, PT South Pacific Viscose, PT Astra
Daihatsu Motor, CV Pesantren 17, LIN-LIPI, PT Pindad, PT Great Giant Pine Aple, POLMAN-
Timah, ISTC-Inco, PT Pupuk Kaltim, PT Perkebunan XIII, Politeknik se-Indonesia-Dikti, PT
Arun NGL Co., PT Avebe Indonesia, PT Karya Hidup Sentosa, Politeknik Payakumbuh, PT
CCSI-Indonesia, PT Schott Iger Glass, Politeknik Negeri Medan, Politeknik Negeri Padang,
POLMAN-Timah, Universitas Pendidikan Indonesia, PT Pertamina Balongan, PT Arhapro,
Universitas Ambon, Retooling-DIKTI, PT Indocement Tunggal Prakarsa, Gotevot-Arab, PT
Inco, PLN
1.7 APPRECIATION
1.7.1 FROM POLMAN-Bandung Director November, 2000: As Coaching at Indonesian Robot Contest 2000 (Graha ITS Surabaya)
1.7.2 FROM POLMAN-Bandung Director April, 19, 2003: As Head of Development-Planning-and Controlled Program for Dedication in
carry out task without tired and watching time, and finished all task in best manner and
destination.
1.7.3 FROM POLMAN-Bandung Director
April, 19, 2003: As Head of Development-Planning-and Controlled Program for Dedication
and Participation to bring a reality that POLMAN-Bandung became a first Government
Institutional in Indonesia for Education which receive Quality Management system certificate
ISO 9001 : 2000.
1.7.4 FROM YAYASAN PEMBINA ROHANI ISLAM SOROAKO
Jumadil Akhir, 1429 H: Participant ad Mosque developing program (Civil supervisor).
1.8 PROFESIIONAL MEMBERS
1.8.1 PERSATUAN INSINYUR INDONESIA August, 2007 – NOW: Badan Kejuruan: Teknik Mesin (No. anggota: 2208-09-018482)
1.8.2 FORUM DOSEN INDONESIA December, 2015 – NOW: (No. anggota: 00250)