Post on 24-Jun-2020
LIVE AUCTION (+WEBCAST)
FUBA PRINTED CIRCUITS GMBH DRESDEN (DE)
Production of printed circuit boards
Kesselsdorfer Straße 216 - 01169 Dresden-Gorbitz (FUBA Printed Circuits GmbH)
Auction date: Thursday 21 OCTOBER starting 11:00
Auction room: KIM Hotel, Gompitzer Höhe 2 - 01156 Dresden
Starting: 11:00
Viewing: Tuesday 19 October from 10:00 until 17:00
Wednesday 20 October from 09:00 until 17:00 Thursday 21 October from 08:00 until 10:00
Kesselsdorfer Straße 216 - 01169 Dresden-Gorbitz (Germany)
230910 11.27
www.TroostwijkAuctions.com
Thursday 21 October 2010 FUBA PRINTED CIRCUITS GMBH DRESDEN
Special Conditions
Auction date Thursday 21 October 2010Viewing Tuesday 19 October from 10:00 until 17:00
Wednesday 20 October from 09:00 until 17:00 Thursday 21 October from 08:00 until 10:00 FUBA Printed Circuits GmbH Kesselsdorfer Straße 216 01169 Dresden-Gorbitz, Germany
Auction room Thursday 21 October from 11:00 until 17:00 KIM Hotel Gompitzer Höhe 2 01156 Dresden, Germany
Company organising this Live Auction (+Webcast)
TROOSTWIJK AUKTIONEN GMBH & CO. KG Stolberger Str. 313 50933 Köln, Germany Phone: +49 221 69066-0 Fax: +49 221 69066-10 Email: info@troostwijk.de
Mark-up 18.00%VAT 19.00%Collection Tuesday 02 November from 10:00 until 17:00
Wednesday 03 November from 08:00 until 16:00 Thursday 04 November from 08:00 until 16:00 Friday 05 November from 08:00 until 11:00 FUBA Printed Circuits GmbH Kesselsdorfer Straße 216 01169 Dresden-Gorbitz, Germany
Webcast charge In addition to the buyer's premium Troostwijk will charge 3,5% to all webcast bidders.
Collection details The buyer is fully responsible for the dismantling, loading and transportation of the bought lots. Troostwijk Auktionen GmbH & Co. KG cannot accept any responsibility unless indicated otherwise. The collection/pick-up will only take place on the mentioned delivery date/time and address.
Information VAT All foreign buyers from countries belonging to the European Community must inform us of their VAT number. If a buyer does not furnish this proof, the auctioneer has to charge the legal German VAT. This VAT amount cannot be refunded. Foreign buyers from countries not belonging to the European Community have to pay the legal German VAT as deposit to the auctioneer. After receipt of the original export documents, which must be stamped officially to prove that the export has taken place, the auctioneer will refund the paid German VAT.
Payment When a bid has been accepted the buyer must immediately pay a deposit of at least 50% of the purchase price in cash or by bank certified crossed cheque. Troostwijk will issue a receipt for this. All payments must be made in € (Euro). Other payment forms such as EC Cash, Maestro, Visacard und Euro/Mastercard are accepted under reservation. The remainder must be paid at the latest on one of the collection days specified in these general conditions of auction, however before the start of dismantling/collection. Your immediate bank payment is required within 48 hours after receipt of the purchase agreement (proforma invoice). Please state your buyer number and the auction name. Troostwijk Auktionen GmbH & Co. KG Deutsche Bank AG, Frankfurt Konto-Nr.: 802 731 0 - 02 BLZ: 500 700 10 IBAN: DE62 5007 0010 0802 7310 02 SWIFT: DEUTDEFF
Terms and Conditions of Sale For the auction the General Terms and Conditions of Online Auction are applicable concerning the (possible) purchase of movable assets, in addition to these Special Conditions.
Contact e-mail: info@troostwijk.de, phone: +49-221-690660
www.TroostwijkAuctions.com
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
1 1 table drilling machine WMW, BT 12, serial number 18422, table drilling machine, throat 210 mm, revolution speed 450-3550 rpm
2 1 bandsaw Optimum, Opti S 181 G, bandsaw, cap. diam. 180 mm, square, 180x240 mm, sawband dim. 2362x19x0,9 mm, electrical connection, 750 W, 400 V, 50 Hz
3 1 lathe Optimum, D 320x920, lathe, cap. diam. 320x920 mm, revolution speed 65-1800 rpm, capacity approx. 40 mm
4 1 double bench grinder WMW, SET 2x20, double bench grinder, 3000 rpm
5 1 tool trolley tool trolley, 6 drawers, with contents
6 1 tool trolley tool trolley with contents
7 1 tool trolley tool trolley, 7 drawers, with contents
8 1 tool trolley tool trolley, 6 drawers, with contents
9 1 tool trolley Garant, tool trolley with contents
10 1 tool trolley HHW, tool trolley with contents
11 1 tool trolley HHW, tool trolley with contents
12 1 cordless screw driller Hitachi, cordless screw driller, 18 V, with case
13 1 cordless impact wrench Hitachi, WR 18 DL, cordless impact wrench, with case
14 1 cordless screw driller Makita, 8270 D, cordless screw driller, 12 V, with screw and drill bit set, with case
15 1 cordless screw driller Bosch, PSR 960, cordless screw driller, 9,6 V, with case
16 1 cordless screwdriver Bosch, PSR, cordless screwdriver, 2,4 V, with inserts and case
17 1 electric grinder Dremel, 398/1, electric grinder, 5000-33.000 rpm, with inserts and case
18 1 hole saw assortment Reca, hole saw assortment, HSS bimetal, with holding fixtures, accessories, diam. 19-76 mm and case
19 1 assortment of gypsum plaster board plugs assortment of gypsum plaster board plugs and screws, various locking washers, with 2 containers
20 1 blind riveting tongs Gesipa, blind riveting tongs with accessories
21 1 hex nut driver set hex nut driver set with ratchet, cap. 8-32 mm
22 1 internal extractor set Baldua, internal extractor set and 1 extractor
23 1 hot air Atlas Copco, hot air, 2000 W
24 1 angle grinder Bosch, GWS 14-125 professional, angle grinder
25 1 jigsaw Würth, STP-60-E, jigsaw, 550 W, max. 60 mm
26 1 drilling machine Bosch, GBM 10 SRE, drilling machine
27 1 cordless drilling machine Schwarzbach, SAB 18 V-P, cordless drilling machine, 18 V, with 1 charger
28 2 heavy duty lifter heavy duty lifter, cap. 5 t
29 1 lot drills lot drilling bits, bolt circle punches, dry-wall plugs and miscellaneous
30 1 wave soldering machine Ersa, ETS 250, year built 2007, wave soldering machine, wave width 250 mm, speed 0,5-3 m/min.
31 1 bench soldering machine EPM, Mini Waver, bench soldering machine, with 2 soldering jigs, automatic wave soldering machine, type SNRP4-20, y/c 2006
32 1 dip soldering machine TL 6, year built 1991, dip soldering machine
33 1 thermal-shock test console Espec, TSD 100, year built 2006, serial number 14000010, thermal-shock test console, internal space approx. 700x410x370 mm and 900x600x450 mm, cooling agent R 404A 30 kg, R 23 10 kg
34 1 thermal-shock test console Weiss, TSD 130, year built 2002, serial number 59226024310010, thermal-shock test console, internal spaceapprox. 400x600x400 mm, cooling agent R 404 A 2,2 kg, R 23 1,2 kg, connection 400 V, 50 Hz, 14 kW, 26 A
35 1 s/s climatic chamber Espec, PA-3KPH, year built 2005, s/s climatic chamber, inside dim. approx. 570x750x840 mm
36 1 s/s climatic chamber Espec, PL-2KPH, year built 2000, s/s climatic chamber, inside dim. approx. 470x550x750 mm
37 1 climatic chamber Heraeus, VLK 08/500, year built 1989, serial number 89/522/32861, climatic chamber, temperature range -80/180 °C, inside dim. 730x820x760 mm, cooling agent R 502 1,6 kg, R 13, digital control
38 1 heating cabinet Memmert, ULE 400, heating cabinet, temperature 220 °C, inside dim. approx. 400x310x390 mm
39 1 measuring station measuring station, with "Erichsen" physiometer 906 MC and "Metra" multimeter
40 1 ohmmeter Dr. Thiedig, Milli TO 2, ohmmeter
41 2 direct voltage regulators Statron, 4210, direct voltage regulators
42 2 direct voltage regulators Statron, 4210, direct voltage regulators
43 1 test station test station with PC and monitor
44 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888 L, year built 2001, serial number D 7302001, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, 125.000 rpm, working range approx. 720x570 mm
45 1 CNC linear 4-spindle heavy-duty drilling machine Pluritec, Giga 8888, year built 1999, serial number 891476, CNC linear 4-spindle heavy-duty drilling machine, 8 lockers, spindle type 1331/30, 125.000 rpm, working range approx. 720x570 mm
46 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07101297, x-ray drilling machine, spindle type WW 1201, 110.000 rpm, circuit board dim. max. 800x650 mm, min. 300x300 mm
47 1 CNC milling machine Schmoll, Compact 23.3, year built 1989, serial number 891416, CNC milling machine, 3 spindle holders, 1 spindle, spindle type SC6 63 2-phase, 60.000 rpm
48 1 x-ray drilling machine Pluritec, Inspect X-Ray, year built 1997, serial number 07100697, x-ray drilling machine, spindle type 1201, 110.000 rpm, table dim. approx. 770x910 mm, with loader and unloader
49 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911709, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
50 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1993, serial number 931429, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm
51 1 CNC PCB drilling machine Schmoll, Compact 25.2/45, year built 1989, serial number 891469, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
52 1 CNC PCB drilling machine Schmoll, 25.2/45, year built 1989, serial number 891470, CNC PCB drilling machine, 4 spindles, spindle type 1331, 125.000 rpm
53 1 CNC PCB drilling machine Schmoll, Compact 23.3/3, year built 1989, serial number 891414, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
54 1 CNC PCB drilling machine Schmoll, Compact 25/4, year built 1991, serial number 911717, CNC PCB drilling machine, 4 spindles, spindle type 1201, 110.000 rpm, cooling defective
54A 1 lot spare parts lot various spare parts (rack contents of lot 1180)
55 1 exhaustion plant Erbo, year built 1996, exhaustion plant, container no. 9601, with "IRS" pressure control D4-S2 and pipework
56 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1989, serial number 891415, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
57 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002891, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
58 1 CNC PCB drilling machine Schmoll, A-System 1 Twin 610, year built 2001, serial number 002892, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
59 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992568, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
60 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992570, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
61 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992569, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
62 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982220, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
63 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982221, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
64 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1998, serial number 982222, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
65 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992526, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
66 1 CNC PCB drilling machine Schmoll, A-System 1 Twin , year built 1999, serial number 992527, CNC PCB drilling machine, 2 spindles, spindle type 1331-17, 125.000 rpm, tool changer approx. 924-fold, reversible, fixed, working range approx. 530x700 mm, with "Schmoll" CNC S40 (x-30) control
67 1 autom. PCB loading and unloading unit Alfa, automatic PCB loading and unloading unit for 10 machines, with control and PC, length approx. 22,5 m, with fence (shuttle)
68 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881313, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
69 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911619, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
70 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911672, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
71 1 CNC PCB drilling machine Schmoll, Compact 24/3, year built 1991, serial number 911673, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
72 1 CNC PCB drilling machine Schmoll, Compact 26.2/5E, year built 1988, serial number 881391, CNC PCB drilling machine, 5 spindles, spindle type 1201, 110.000 rpm
73 1 CNC PCB drilling machine Schmoll, Compact 26/3, year built 1991, serial number 911708, CNC PCB drilling machine, 3 spindles, spindle type 1201, 110.000 rpm
74 1 CNC PCB drilling machine Schmoll, Compact 22/2, year built 1989, serial number 891337, CNC PCB drilling machine, 2 spindles, spindle type 1201, 110.000 rpm
75 1 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891477, CNC PCB drilling machine, 4 spindles, spindle type 1331-17, 110.000 rpm
76 2 CNC PCB drilling machine Schmoll, Compact 25.2/4E, year built 1989, serial number 891471, 891472, CNC PCB drilling machines, each 4 spindles, spindle type 1331-17, 125.000 rpm, with 1 "Schmoll" loading unit, type Bela, s/n 891488, y/c 1989
77 1 CNC scoring machine Löhr + Hermann, LH 306 SM, year built 1994, serial number 200.324/037, CNC scoring machine, PCB format min./max. approx. 180x180 mm/640x640 mm, PCB thickness 0,5-3,2 mm, infeed speed, x-axis max. 30 m/min., y-axis max. 40 m/min., with loading and unloading
79 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 2000, serial number 002594, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
80 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1997, serial number 972229, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold
81 1 CNC PCB drilling and milling machine Schmoll, A-System 4/3, year built 1998, serial number 982443, CNC PCB drilling and milling machine, 3 spindles, spindle type SC 63, 60.000 rpm, with tool changer 330-fold, buffer station and loader
82 1 CNC PCB drilling and milling machine Schmoll, System 1, year built 1998, serial number 982442, CNC PCB drilling and milling machine, 2 spindles, spindle type SC 63, 60.000 rpm and spindle type 1331, 125.000 rpm, tool magazine 660-fold, "Schmoll" x-30 control
83 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1993, serial number 931775, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 3-phase, 60.000 rpm
84 1 CNC PCB drilling machine Schmoll, Compact 23.2/3, year built 1992, serial number 921680, CNC PCB drilling machine, 3 spindles, spindle type SC 63, 2-phase, 60.000 rpm
85 1 CNC PCB milling machine Schmoll, System 5/4, year built 1994, serial number 941827, CNC PCB milling machine, 4 spindles, spindle type D 1331-26, 125.000 rpm
86 1 drill hole inspector Meiko/Japan, MHI 600, year built 1998, drill hole inspector for PCB, working width approx. 620 mm, with automatic loader, type MPL 600, seperator/band, type MSP 601 and automatic discharging type MST 761
87 1 CNC-multisensor-coordinate measuring machine Werth, Video Check IP 600, year built 1999, CNC-multisensor-coordinate measuring machine, with computer, 2 monitors, "Brother" printer, type HC 2040 and accessories
88 1 plug-in connector milling machine FSL/Shode, SF 1000, year built 1994, plug-in connector milling machine
95 2 dust exhaustion plant Erbo, dust exhaustion plant, 1x type STA 2000 EX, consisting of: separator, blower, 22 kW (milling machine), blower 2x 7,5 kW (scoring machine) and filter
96 1 loader Schmid, VA 806, loader, with vacuum handling and roller conveyor
97 1 HD final cleaning Schmid, HD final cleaning, consisting of 5 modules: module 1 infeed, module 2 rinsing, module 3 cascade rinsing, module 4 drying, module 5 discharge and control cabinet, working width 650 mm, machine length 4600 mm
98 1 unloader Schmid, VA 806, unloader, with vacuum handling and belt conveyor
99 1 drill grinding machine Kocher, BSS 6R, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
100 1 drill grinding machine Kocher, BSS 6R, year built 1989, drill grinding machine, drill shaft diam. 0,5 - 5,0 mm, drill diam. 0,3 - 6,0 mm, overall performance 30 - 70 mm, point angle 100 - 180°, side clearance angle 0 - 30°, grinding motor 0,37 kW, 2700 rpm, with loading and unloading magazine
101 1 drill grinding machine TCT, AMP 100, year built 2007, serial number A100061101, drill grinding machine, drill diam. 0,1 - 3,175 mm, point angle 110° - 180°, grinding disc diam. 75 mm, revolution speed 5400 rpm, cutting speed 1200 m/min.
102 1 drill grinding machine TCT, drill grinding machine, drill diam. 0,2 - 3,175 mm, point angle 110° - 180°, clearance angle 0° - 3°, capacity 200 - 240 pieces/h
103 1 drill grinding machine Hawera, drill grinding machine, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
104 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
105 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
106 1 drill grinding machine Hawera, drill grinding machine, with camera and monitor, drill diam. 0,2 - 6,5 mm, point angle 130° (165°), clearance angle 15°, 30°
107 1 drill inspection station Kocher, serial number 519/S 2 88, drill inspection station, consisting of: stereo microscope with lighting and fixture
108 1 ring setting machine Union Tool, RSM-H, serial number 113368, ring setting machine, with 1 lot various rings
109 1 ultrasonic cleaning bath Sonorex, RK 510 H, serial number 321095103, ultrasonic cleaning bath
114A 1 lot PCB material blanks lot PCB material blanks
115 1 ring setting and drill packaging machine Kocher, year built 1989, ring setting and drill packaging machine
117 1 Adara press Cedal, 52, year built 2006, serial number 06 MLP 10.013, Adara press, pressing surface 630x840 mm, package height max. 165 mm, with PC and printer
118 1 cooling press Cedal, cooling press, 3 levels, inside dim. approx. 650x900x300 mm
119 1 scissor lifting table scissor lifting table for Adara press
120 1 scissor lifting table scissor lifting table for Adara press
121 1 placing station Cedal, manual placing station for Adara press, working width approx. 670 mm
122 1 storage unit storage unit for copper rolls for Adara press
123 1 wall racks wall racks for roll storage, working width 760 mm
124 1 heatsink multilayer press Bürkle, LA-M 150, year built 1989, serial number 2943, heatsink multilayer press, main press force 1500 kN, pre-press force 150 kN, with press carriage, steam-heated, piston diam. 250 mm, working surface approx. 750x700 mm
124A 1 lot sheet steel blanks lot sheet steel blanks, on 5 transport trolley, dim. approx. 650x520 mm, 640x680 mm, 640x650 mm
124B 3 transport trolleys transport trolleys with steel blanks
125 1 Thermobond feeder Cedal, BM 66 S, Thermobond feeder, temperature max. 300 °C, working range WxL approx. 280-650x370-720 mm
126 1 measuring machine Projectina, RPM 600, measuring machine, cross table x,y 600x500 mm, with digital measuring computer and projector head
127 1 multilayer-press Cedal, Adara 48 d, year built 2000, multilayer-press, pressing surface 720x1080 mm, package height 140-190 mm, temperature 350 °C, with PC and printer
128 1 cooling press Cedal, year built 2000, cooling press, 3 levels, chamber dim. approx. 1000x1200x130 mm
129 1 shuttle Cedal, year built 2000, shuttle, cap. 1000 kg, length approx. 10 m, with roller conveyor
130 1 lay-up-station Cedal, year built 2000, lay-up-station, with laser beam positioning, working width approx. 820 mm, with scissor lift, loading and unloading
130A 1 lot sheet steel blanks lot sheet steel blanks, dim. 700x1150 mm, 700x1000 mm, 700x670 mm, on 6 transport trolleys
130B 1 lot sheet steel blanks lot sheet steel blanks, dim. 660x700 mm, 700x1000 mm, with 4 transport trolleys
130C 2 transport trolleys transport trolleys, dim. 1100x900x1000 mm
130D 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
130E 2 transport trolleys transport trolleys, dim. 900x1450x1000 mm
131 1 shelving frame Cedal, year built 2000, shelving frame, 3 levels
132 1 rack for rolls Cedal, year built 2000, rack for rolls, 8-fold
133 2 wall racks for rolls wall racks for rolls, 6-fold, dim. 1070x2000 mm
134 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
135 1 exhaustion plant Erbo, STA 2000/Ex, serial number 213/00, exhaustion plant with accessories
136 1 exhaustion plant Erbo, STA 1600 Ex, exhaustion plant with accessories
137 1 edge milling plant Löhr + Herrmann, LH 605/10, year built 1989, serial number 1289/29-220, edge milling plant, working width approx. 700 mm, total dim. approx. 1600x11000 mm, consisting of: roller conveyor, "Origa" handling, 2 milling units, turning station, depositing table
138 1 PCB sawing machine Smid, 840 SD, year built 1988, serial number 0405 V P0384, PCB sawing machine, saw blade diam. 400 - 500 mm, sawing spindle speed 3000 rpm
139 1 PCB sawing machine Smid, 510, year built 1989, serial number 0397 V P0384, PCB sawing machine, saw blade diam. 275 - 400 mm, sawing spindle speed 2800 rpm
140 1 drilling und pinning machine Schmoll, ABS 2, year built 1989, serial number 891489, drilling und pinning machine, with table
141 1 infrared dryer Heraeus, CM-V/24-/R/T21PC, year built 1991, serial number 91-5-037, infrared dryer with roller conveyor, temperature 150 °C, heating zone length 2225 mm, width 650 mm, cooling zone length 1000 mm, total dim. LxWxH (oven) 4335x930x1160 mm
142 1 hydropneumatic table press Mäder, HP 10.000 HV 10/50, year built 2006, hydropneumatic table press, compressed air 100 kN, lifting length 10/50 mm, workpiece dim. 310x220 mm/14 kg, with tools
143 1 hydraulic table press Mäder, HP 10.000 HV 10/50 E-ZH, year built 2001, serial number 1341601/01, hydraulic table press, cap. 100 kN
144 1 assembly plant ISS, assembly plant for PCB with CU inlays, mainly consisting of: table support, sliding cross table, press, inlay feed, fixation, blank holder, brushing station, SPS Elektrik, "Siemens" control panel
145 1 CNC drilling machine Schmoll, Compact 10, year built 1991, serial number 911608, CNC drilling machine, 1 spindle, spindle type SC 63, 2-phase, 60.000 rpm
146 1 finger tester ATG, A 3, serial number 06.01 00A3003, finger tester, 8 test heads (4 heads/side), synchronous testing of several PCB active test area 520x400 mm (20,4 inn x 15,7 in), Prüflingsgröße max. 610x457 mm (20,0 in x 18,0 in), 2 cameras for optical scanning top down, optical imaging approx. 8x 6,5 mm with 10 µm/pixel resolution, 2-point combination measurement from 1 Ohm, 100% insulation test with 10 MSL via field measuring method, positioning accuracy in x and y direction +/- 35 µm, smallest test point 100 µm
147 1 universal PCB test system ATG, A 1000, serial number 9208 1000 60, universal PCB test system, contact surface max. 600x600 mm, height adjustment 0 - 40 mm, stufenlos, with PC and printer
147A 1 mobile adapter loading system Luther Maelzer, ALS 100/20, year built 1995, serial number 596066, mobiles adapter loading system
148 1 repair workstation repair workstation, consisting of: "Olypmus" microscope, light source, "Ersa" soldering station and worktable
149 1 repair workstation Carl Zeiss, repair workstation, consisting of: "Olympus" microscope, light source, "Ersa" soldering station with magnifier and worktable
150 1 welding and repair workstation Covatec, P 1240-75/Circuit Saver, welding and repair workstation, with "Wild" microscope and worktable
151 1 welding and repair workstation welding and repair workstation, with "Mantis" microscope, 3 "Weller" soldering stations, "Unitron" light table
152 1 stereo microscope Olympus, SZ 30, stereo microscope with Highlight 2000 and worktable
153 1 AOI inspection system Orion, Orion 604/Camtek, year built 2000, serial number 2432, inspection system
154 1 splitting-head welding machine Covatec, SPR 10-1010, year built 2001, splitting-head welding machine, with "Nikon" microscope, accessories and worktable
155 1 conducting paths measuring device Navitar, conducting paths measuring device, with "Shuttl" PC and TFT-monitor, "Olympus" light source and worktable
156 1 microscope Olympus, SZ 30, microscope, with light source and measuring bridge
157 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0310, optical inspection system, working width 650 mm, with loader, "Linux" inkjet printer, type 4800 and control panel
158 1 optical inspection system Orbotech, TS-9060-II, year built 2000, serial number SB-0404, optical inspection system, working width 650 mm, with unloader, "Linux" inkjet printer, type 4800 and control panel
159 1 turning station Cemco, PJ35 LD 016, year built 1995, turning station
160 1 verifying station Orbotech, VRS-4 L I, year built 2000, serial number VR 0419, verifying station
161 1 verifying station Orbotech, VRS-4 I, year built 1998, serial number VR 8434, verifying station
162 1 verifying station Orbotech, VNR 300, year built 1992, serial number 21, verifying station
162A 1 lot "Orbotech" parts lot "Orbotech" parts for Vision-system
163 1 verifying station Orbotech, VNR 300, year built 1993, serial number 24, verifying station
164 1 inspection system Orbotech, Vision Blaser, year built 1992, serial number 2666, automatic inspection system
164A 1 cabinet cabinet with "Orbotech" accessories and 1 wooden cabinet with various contents
165 1 inspection system Orbotech, Vision Blaser, year built 1993, serial number 1018, automatic inspection system
166 1 welding and repair workstation Covatec, welding and repair workstation with stereo microscope and worktable
167 1 welding set Mania, Cir-Kit Weld, welding set and worktable
168 1 scanning electron microscope ISI, ABT-55, year built 1991, scanning electron microscope, with PC and monitor
169 1 digital hardness measuring ocular Leitz, Miniload 2, digital hardness measuring ocular for "Vickers" and "Knopp" hardness testers, with computer-counter-printer, type RZD-DO
170 1 profile projector Projectina, 4014 BK 1, serial number 890930, profile projector
171 1 stereo mikroscope VMZ, stereo microscope
203 1 cleaning line for copper surfaces Enthone, Entek Plus CU-106 A Additive, year built 1999, serial number 5100120, cleaning line for copper surfaces, consisting of: cleaner, temperature +50/-2 °C, stripping, temperature +38/-2 °C, Entek temperature +45/-2 °C, dryer, temperature +100/-2 °C, 10 modules, module width 800 mm, with suction unit, pipework, control cabinet and clip-on baskets
204 1 gas scrubber Rühl, C5-1000/500/4000, serial number 88-800IL5, gas scrubber, capacity 0.63 cm³, washing agent: caustic soda solution
205 1 input station Löhr + Herrmann, input station, infeed width approx. 850 mm
206 1 chemical tin plant Mc Dermid, Mac Star HSR, year built 1999, serial number 16-6508-99-10, chemical tin plant, consisting of: infeed, cleaner, cascade rinsing, etching, rinsing, control, Pre-Dip, immersion, cascade rinsing, rinsing, dryer, "Siemens" control Simatic PO 27, cap. VS= 1000 mm/min., module width approx. 900 mm, total dim. approx. 13.000x1500 mm, operating hours (read off) 45.104, with control cabinet and pipework, etc.
207 1 outfeed station Löhr + Herrmann, outfeed station, width approx. 900 mm
208 1 input station Löhr + Herrmann, input station, width approx. 850 mm
209 1 stripping plant Schmid, 25, year built 1995, serial number 25-95-048, stripping plant, type 98, s/n 98-00-192, y/c 2000, infeed 0,2-6 m/min., consisting of; degreasing, rinsing, stripping, rinsing, dryer, 7 modules, with control cabinet
210 1 s/s transfer station Penta, s/s transfer station, mobile, dim. approx. 1500x800 mm
211 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-based, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
211A 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
212 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 3000x700 mm
213 1 subsequent cleaning plant Schmid, subsequent cleaning plant, type 16, s/n 16-96x314, y/c 1997, type 98, s/n 98-00-195, y/c 2000, working height approx. 650 mm, with 6 modules, a.o. infeed, rinsing, drying, with pipework, pumps, exhaust air unit, control cabinet, etc.
214 1 removal station Löhr + Herrmann, removal station, width approx. 850 mm
215 1 input station Löhr + Herrmann, input station, width approx. 700 mm
216 1 stripping line Schmid, 25, year built 1997, serial number 25-96-343, stripping line, infeed 0,2-6 m/min., consisting of: degreasing, rinsing, stripping, rinsing, drying, with control cabinet
217 1 hot leveling plant Penta, HFL 700, hot leveling plant, lead-free basis, cap. 320 strokes/h, max. plate size 720x720x6 mm, max. lifting speed 80 cm/sec., lead-tin container, cap. 400 kg
218 1 s/s loading station Penta, s/s loading station, with fluxer, mobile, dim. approx. 2000x700 mm
219 1 s/s cooling line Penta, s/s cooling line, with meshband conveyor, mobile, dim. approx. 2000x1000 mm
220 1 subsequent cleaning line Schmid, 16, year built 1997, serial number 16-96-344, subsequent cleaning line, working width approx. 700 mm, 6 modules, a.o. transfer, cleaning, rinsing, drying, with pipework, pumps, control cabinet, etc.
221 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
222 1 shelving system shelving system, with various spare parts, length approx. 3000 mm
223 1 metal cabinet metal cabinet with various spare parts
224 1 batching tank Höllmüller, Devo 47x, year built 1989, serial number 1275/11, batching tank
225 1 lot tin/lead lot tin/lead, with 3 euro-pallets
226 1 gas scrubber Hema, NKV 1000 SO, serial number 15048-1, gas scrubber, air volume 5000 m³/h, volume circulated 13 m³/h
227 1 s/s cleaning tank Penta, cleaning tank, dim. approx. 2000x600 mm
228 1 cleaning tank KLE, cleaning tank, mobile, dim. approx. 1200x700 mm
229 1 compressed-air tank Lohenner, year built 2000, compressed-air tank, cap. 500 l
230 1 compressed-air tank OKS, year built 2000, compressed-air tank, cap. 500 kg
231 1 s/s automatic electroplating system Atotech, Synaplus-vertikal, year built 2006, s/s automatic electroplating system, consisting of: loader, reservoir, dryer, rinse, trestle stripping, galvanic tin, degreasing, stripping, chemical pickling, galvanic copper, with 2 hoisting and running gears, y/c 2006, cap. 250/500 kg, speed 45 m/min., working width approx. 3300 mm, with pumps, control, control cabinets, pipework, anode cleaning, gangway, etc. total dim. approx. 30.000x5000 mm, without anodes
232 1 lot anodes lot anodes (contents of lot 231)
233 1 s/s automatic electroplating system STS, year built 1987, s/s automatic electroplating system, type U 100, s/n DDR-238, 239, type U 2850, s/n DDR-286, 287, PCB formats, 550x393,75 mm, consisting of: loading, dryer, degreasing, rinsing, stripping, rinsing, galvanic tin, chemical pickling, rinsing, stripping, chemical pickling, galvanic copper, with pipework, containers, control cabinets, pumps, with incomplete gangway, etc., total dim. approx. 25.000x5000 mm, without anodes
234 1 lot anodes lot anodes (contents of lot 233)
235 7 euro-pallets with galvano frames euro-pallets with galvano frames
236 4 euro-pallets with copper and tin anodes euro-pallets with copper and tin anodes
237 6 transport trolleys transport trolleys
238 15 transport trolleys transport trolleys
239 5 euro-pallets with copper anodes euro-pallets with copper anodes
240 1 loading station Schmid, 87 Vaculine, year built 1999, serial number 87-98-392, loading station, with "Siemens" Simatic OP 7 control
241 1 galvanic-resist-stripping-alkaline etching line Schmid, year built 1999, galvanic-resist-stripping-alkaline etching line, type 46, s/n 46-98-390, type 24, s/n 24-98-391, infeed 0,2 - 6 m/min. working height approx. 930 mm, consisting of: infeed, pressure rinsing, spraying, pre-etching, ammoniacal etching, final etching, cascade rinsing, working width approx. 700 mm, with pipework, valves, pumps, control cabinet
242 1 removal station Schmid, 87 Vaculine, year built 1999, serial number 87-98-393, removal station, with "Siemens" Simatic OP 7 control
243 1 loading station Löhr + Herrmann, loading station, working width approx. 800 mm
244 1 horizontal lead/tin stripping plant Ato, Uniplate, year built 1997, serial number 9612021, horizontal lead/tin stripping plant, speed 3 m/min., plate material FR 4, plate format 3,2 - 0,8x457x610 mm, with stripper, cascade rinsing, dryer, pipework, control cabinet, etc.
245 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
246 1 loading station Löhr + Hermann, loading station, working width approx. 800 mm
247 1 tin stripping plant Höllmüller, Tin-Lead, year built 1996, serial number 2434/01-06, tin stripping plant, with stripper, 2-fold cascade-rinsing, circulating water rinse, dryer, discharge, working width approx. 700 mm, with pipework, control cabinet, touch panel, pumps, etc.
248 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
249 1 surface gold plant Büttner, surface gold plant, 16 stations, rinsing, stripping, rinsing, chemical pickling, rinsing, galv. nickel, rinsing, Ni-activation, rinsing, galv. gold bath CC-AF, still rinse, rinse, dim. approx. 7000x2500 mm, with control cabinet, exhaust air unit
250 1 s/s cleaning tank s/s cleaning tank, dim. approx. 1200x600 mm
251 1 safety storage cabinet safety storage cabinet with various chemicals
252 1 rack rack with various filters
253 1 gas scrubber VSS, KFVG 800, year built 1999, gas scrubber, air volume 4000 m³/h, volume circulated 10 m³/h
254 1 KT gas scrubber VSS, TKV 1000, year built 1993, serial number 025156, KT gas scrubber, V= 4000 m³/h
255 1 dosing container dosing container
256 1 dosing container dosing container
257 1 dosing container dosing container
258 1 batching tank batching tank with pump
259 1 current rectifier Munk, current rectifier
260 1 shelving system shelving system with various spare parts
261 1 lot transport trolleys lot transport trolleys, approx. 20 pieces
262 28 tables tables
263 4 roller conveyors roller conveyors, dim. each approx. 2500x650 mm
264 1 cabinet cabinet with various contents
265 1 automatic electroplating system Ludy, year built 2000, serial number 800001K115, automatic electroplating system, with gangway, control cabinets, pipework, pumps, suction unit, with 2 hoisting and running gear, cap. 500/300 kg, total dim. approx. 25.000x6000 mm
266 1 lot anodes lot anodes (contents of lot 265)
267 1 chemical nickel-gold plant STS, year built 1990, chemical nickel-gold plant, max. format 2600x950 mm, 21 stations, a.o. Aurolektroless SMT, rinsing, cascade rinsing, pre-immersion, Ronamerse SMT Catalyst, Ronamax SMT, stripping, cleaning, acid rinsing, with hoisting and running gear, cap. 50 kg, with control cabinets, gangway, pipework, exhaust air unit, etc. total dim. approx. 15.000x4000 mm
268 1 loading station Löhr + Herrmann, loading station, working width approx. 750 mm, with vacuum handling
269 1 deburring and brushing machine Schmid, 12 Combi Line, year built 1997, serial number 12-96-345, deburring and brushing machine, 8 modules, a.o. infeed, brushing, rinsing, drying, working width approx. 650 mm, working height 900 mm, working direction rechts/links, infeed 0,2 - 6 m/min., with "Lauer" control, type DCS 095
270 1 seperator/band Meiko Electronics, MSP 601, seperator/band for PCB, working width approx. 620 mm, length approx. 1000 mm
271 1 drill hole inspector Meiko Electronics, MHI 600, drill hole inspector for PCB, working width approx. 620 mm, mit seperator/band, type MSP 601
272 1 horizontal desmear plant Ato, Uniplat-P, year built 1999, serial number 9812071, horizontal desmear plant, with infeed, etch-cleaner, rinsing, sweller, permanganate, reduction, dryer, discharge, speed 2 m/min., PCB format TxWxL 0,135 - 3 mm x 650/350 mm x 610/360 mm, with pipework, pumps, filters, valves, control cabinets
273 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
274 1 separator Turbo Separator, MZA-T146415, year built 2008, serial number 11598, separator, with "Siemens" control, type TD 200
275 1 pumping station Platz, 400513, year built 1997, serial number 48372, pumping station, cap. 45 l/min.
276 1 s/s container s/s container, useable space approx. diam. 1700x800 mm, with agitator
277 1 drain tank drain tank for cleaning solution, contents 1800 l, material PE
278 1 heat recovery station heat recovery station, with s/s trestle
279 1 loading station Alfa, year built 1996, serial number 4046, loading station, working width approx. 700 mm
280 1 pre-treatment line Alfa, Uniplate/Neopact, year built 1996, serial number 512145, pre-treatment line for plated through-holes and copper plating, PCB TxWxL 102 µm - 5 mm x 650/350x610/350 mm, speed 2,5 m/min (NP), 1,6 m/min. (CU), with infeed, conditioning, rinsing, pre-immersion, conducter, immersion, selector
281 1 transfer station transfer station, U-shape
282 1 chemical pickling Ato, Neopact, chemical pickling, 105 l, 30 °C
283 1 back station Ato, Neopact, back station with drive
284 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mm x 650/350x610/350, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with current rectifier, 2x 8 V/4000 A, 1x 4 V/50 A, 1x 10 V/600 A, water cooling, power supply error detection, pumps, etc.
285 1 back station Atp, Neopact, back station with drive
286 1 galvanic copper line Ato, Neopact, year built 1996, serial number 512145, galvanic copper line, PCB format TxWxL 102 µm - 5 mmx650/350x610/350 mm, speed 2,5 m/min. (NP), 1,6 m/min. (CU), contents 6000 l, bath temperature 26 °C, with control cabinet, pumps, etc.
287 1 rinsing line Ato, Neopact, rinsing line, with dryer and discharge
288 1 removal station Alfa, year built 1996, serial number 4056, removal station, working width approx. 700 mm
289 1 IT-cabinet IT-cabinet with PC, "Hanns G" flatscreen, etc.
290 3 plastic containers plastic containers with membran pumps, 1 "Lutz" barrel pump, 1 plastic tub, etc.
291 1 disc grinding machine Wirtz, Phoenix Alpha, disc grinding machine, disc diam. approx. 200 mm
292 1 double magnifier Olympus, double magnifier
293 1 CU-scope Fischer, CU-scope
294 1 ISO-scope Fischer, ISO-scope
295 6 transport trolleys various transport trolleys
296 1 plastic tank plastic tank with agitator, 1 plastic tank 1 plastic collecting trough
298 1 rack rack with various machine accessories
299 1 water cooling unit water cooling unit
300 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
301 1 s/s transport trolley s/s transport trolley with scissor lifting table, dim. approx. 800x400 mm
302 2 cardboard boxes with accessories cardboard boxes and 1 pallet with accessories
303 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
304 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
305 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
306 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
307 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
308 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
309 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
310 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
311 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
312 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
313 1 storage tank Lang, year built 1998, storage tank, capacity 120 l, material PP, with accessories
314 1 stackable containers stackable containers with copper sludge
315 1 plastic recovery container plastic recovery container
316 1 palladium recovery year built 2001, palladium recovery via ultra filtration, average capacity approx. 100 l/h, with 2 plastic containers, "Antech" filters, rinsing tank, etc.
317 1 s/s recovery plant IS, FI/trex 2000, year built 1999, serial number 0236956, s/s recovery plant, cap. 400 V, 8 kW
318 1 light table Klimsch, light table, dim. approx. 800x600 mm
319 1 face and body shower face and body shower
320 1 industrial vacuum cleaner Ruwac, industrial vacuum cleaner, 220 V
321 1 drying furnace Reinhardt, LTV 150/S, year built 1991, serial number 8122, drying furnace, useable space 1,8 m³, 1 charging trolley
322 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7707, drying furnace, useable space 1,42 m³, 1 charging trolley
323 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7706, drying furnace, useable space 1,42 m³, 1 charging trolley
324 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7709, drying furnace, useable space 1,42 m³, 1 charging trolley
325 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7702, drying furnace, useable space 1,42 m³, 1 charging trolley
326 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7700, drying furnace, useable space 1,42 m³, 1 charging trolley
327 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7701, drying furnace, useable space 1,42 m³, 1 charging trolley
328 1 drying furnace Reinhardt, LTV 150/S, year built 1989, serial number 7755, drying furnace, useable space 1,42 m³, 1 charging trolley
329 1 stripping machine EMM, 1200, year built 1990, serial number 801980489, stripping machine, max. working width approx. 1200 mm
330 1 loading station Löhr + Herrmann, MES 20, year built 1989, loading station
331 1 pre-cleaning Höllmüller, SPT-HKY 65, year built 1989, serial number 1287/4, pre-cleaning for conductive carbone lacquer printing with heating and cleaning module, discharge, speed 1,2 - 1,6 m/min., rinsing cascade 200 - 300 l/h, operating hours (read off) 1650
332 1 developer Holmstrands, 140033, year built 1991, serial number 140033, developer, working width approx. 600 mm
333 1 removal station Löhr + Herrmann, removal station, max. working width approx. 600 mm
334 1 developer for PCB Holmstrands, year built 1990, serial number 90058, developer for PCB, heating capacity 18 kW, with "Holmstrands" dryer, s/n 140026, y/c 1990, heating capacity 4 kW, with "Schulz-Heumer" stacker, y/c 1989
335 5 screen print transport trolleys screen print transport trolleys
336 1 screen print cleaning station screen print cleaning station
337 1 continuous flow dryer Systronic, continuous flow dryer, with 2 meshbands, band width each 700 mm, max. infeed height approx. 70 mm, band length each approx. 4500 mm
338 1 stacker Lantronic, Lan 88 COL, year built 1998, serial number 81, stacker, max. working width approx. 700 mm
339 1 stacker Löhr + Herrmann, stacker, max. working width approx. 700 mm
340 1 UV-dryer Beltron, UV-dryer, with meshband conveyor and suction unit, meshband width approx. 600 mm, meshband length approx. 2000 mm
341 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178806, semi-automatic screen printing machine
342 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178803, semi-automatic screen printing machine
343 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178807, semi-automatic screen printing machine
344 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178805, semi-automatic screen printing machine
345 1 semi-automatic screen printing machine Argon, Hydra 2 S, serial number 9178808, semi-automatic screen printing machine
346 1 rack rack with approx. 25 screen printing frames
347 1 workbench workbench with suction hood
348 1 laboratory mixer IKA, RW 28 basis, laboratory mixer
349 1 lot transport trolleys lot various transport trolleys, approx. 20 pieces
350 1 rack rack with contents, a.o. copper blanks
352 1 drying cabinet vertical drying cabinet for screen printing frames, dim. approx. 1500x600 mm
353 1 clamping table Harlacher, H 34, clamping table, dim. approx. 2000x2000 mm, with 25 clamping installationen
354 1 clamping table clamping table, with 16 drawing devices, dim. approx. 2000x2000 mm
355 1 worktable worktable, dim. approx. 2000x2000 mm
356 1 compressor Jun Air, 4000-40 MO, year built 2002, serial number 524142, compressor, operating hours (read off) 136 (for lot. 353)
357 1 rack rack with approx. 200 screen printing frames
358 1 rack rack with approx. 50 screen printing frames
359 1 light table Klimsch, LT 120, year built 1989, light table with magnifier, dim. approx. 1500x1500 mm
360 1 light table Klimsch, light table, dim. approx. 600x400 mm
361 1 light table Klimsch, light table with magnifier, dim. approx. 1000x1000 mm
362 1 screen printing frame cleaning station 2688, screen printing frame cleaning station
363 1 clamping table clamping table with clamping installation, pivoting, mobile, dim. approx. 1500x1500 mm
364 1 copying lamp Technigraf, Akticap 5000-AC80194, serial number 224718, copying lamp
365 1 drying cabinet drying cabinet for screen printing frames, horizontal, 4 drawers
366 1 rack rack with approx. 20 screen printing frames
367 1 drying cabinet Reinhardt, LTV 150/S, year built 1989, drying cabinet
368 1 rack rack with approx. 15 screen printing frames
369 1 cleaning station cleaning station
370 1 semi-automatic screen printing machine Argon, Hydra S, semi-automatic screen printing machine
371 1 agitator Pendraulik, agitator with table
374 1 loading station Schmid, Vaculine, year built 1999, serial number 87-99-104, loading station, max. working width 650 mm, working height 950 mm, with vacuum handling and "Siemens" control Simatic OP 7
375 1 pre-treatment solder resist mask Schmid, 26, year built 1999, serial number 26-99-103, pre-treatment solder resist mask, with etching and cleaning modules, switch cabinet, infeed 0,2 - 6 m/min., speed 0,2 - 6 m/min., PCB thickness 0,2 - 6 mm
376 1 pumice powder brushing machine IS, Pumiflex SHD 24, year built 1999, serial number 0121260, pumice powder brushing machine, working width approx. 600 mm, with "Siemens" control OP 15
377 1 removal station Schmid, Vaculine, year built 1999, serial number 87-99-105, removal station, with vacuum handling, max. working width 650 mm, working height 950 mm, with "Siemens" control OP 7
378 1 pre-cleaning IS, serial number 0146422, pre-cleaning
379 1 safety storage cabinet Düperthal, 2.29.00, serial number 229300470173, safety storage cabinet
380 1 safety storage cabinet Düperthal, 2.12.925.2, serial number 249112041158, safety storage cabinet
381 1 s/s mixer Pendraulik, s/s mixer
382 7 ball tables ball tables, dim. approx. 1500x900 mm
383 1 loading station Kuttler, MLE 60, year built 2000, serial number 2560, loading station, max. working width approx. 600 mm, PCB thickness 0,2 - 4,2 mm, with "Kuttler" control
384 1 cleaning module Höllmüller, cleaning module with transfer station, operating hours (read off) 3314
385 1 pumice powder brushing machine IS, serial number 0103508, pumice powder brushing machine
386 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105552, transfer station, L-shape
387 1 pre-heating Kuster, Probimer 130, pre-heating
388 1 transfer station Kuster, Probimer 607, year built 1991, serial number 91104314, transfer station, cap. 0,6 Nm³/h, 0,2 kW
389 1 transfer station Kuster, Probimer 607, transfer station
390 1 casting module Kusag/Bürkle, Probimer 150 C, year built 1991, serial number 5077, casting module
391 1 conveyor belt Bürkle, Probimer 150 LTV, conveyor belt, dim. approx. 1500x650 mm
392 1 conveyor belt Bürkle, Probimer LTV, year built 1991, serial number 5072, conveyor belt, dim. approx. 1500x650 mm
393 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.131, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
394 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
395 1 transfer station Kuster, Probimer 601, year built 1991, serial number 01104514, transfer station, operating hours (read off) 83.310
396 1 continuous flow furnace Pagendarm, continuous flow furnace, dim. approx. 2000x1500 mm
397 1 transfer station Kuster, Probimer 607, transfer station, dim. approx. 500x650 mm
398 1 conveyor belt Bürkle, 150 LTV, conveyor belt, dim. approx. 1500x700 mm
399 1 conveyor belt Bürkle, 150 LTV, year built 1991, serial number 5073, conveyor belt, dim. approx. 1500x700 mm
400 1 Probimer casting module Bürkle/Kusag, 150 C, year built 1991, serial number 5078, Probimer casting module
401 1 Probimer exhaust air unit Kuster, 230 S, year built 1990, serial number 90.1091.130, Probimer exhaust air unit, min. plate size 200x200 mm, max. plate size 610x760 mm, max. weight 3,5 kg, stacking cap. 36 pieces, infeed height 900 +/- 25 mm
402 1 continuous flow furnace Pagendarm, Probimer 250, continuous flow furnace, working width approx. 690 mm, speed 1,3 - 115 m/min., chain track width 780 mm, total dim. approx. 4300x1500 mm
403 1 transfer station Kuster, Probimer 609, year built 1991, serial number 91105551, transfer station, dim. approx. 1000x700 mm, with drying installation
405 1 switch cabinet switch cabinet
406 1 switch cabinet switch cabinet
407 1 switch cabinet switch cabinet
408 1 switch cabinet switch cabinet
409 1 switch cabinet switch cabinet
410 1 switch cabinet switch cabinet
411 1 switch cabinet switch cabinet
412 1 switch cabinet switch cabinet
413 1 switch cabinet switch cabinet
414 1 switch cabinet switch cabinet
414A 1 vacuum distillery ITC, Vakumer-SM, year built 1993, serial number 0586466, vacuum distillery (for recovery of solvents, usually used for photosensitive solder resist masks), capacity approx. 50 l/h, storage tanks approx. 300 l, with accessories and control cabinet
415 5 transport trolleys Kuttler, transport trolleys
416 1 transport trolleys various transport trolleys, approx. 40 pieces
417 5 transport trolleys Kuttler, transport trolleys
418 5 transport trolleys Kuttler, transport trolleys
419 1 exposure machine ORC, HMW 680 GW, year built 1998, serial number 35800, exposure machine
420 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27599, exposure machine
421 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28130, exposure machine
422 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 28077, exposure machine
423 1 exposure machine ORC, HMW 680 GW, year built 1992, serial number 27600, exposure machine
424 1 LLD-camera film adjustment machine Printprocess, Expo Aligner, year built 2008, serial number 08051515, LLD-camera film adjustment machine for PCB exposure, datum hole up to 4 mm, dim. 775x700x430 mm
425 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
426 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
427 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
428 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
429 1 inspection workstation inspection workstation, mobile, dim. approx. 1000x1000 mm, with lamp
430 1 light table Mina, light table, dim. approx. 1200x600 mm
431 2 hand lever punches hand lever punches
432 1 lot overlays lot overlays for transport trolleys
434 1 Probimer developing line Schmiedeskamp, 475M4, year built 1991, serial number 980, Probimer developing line, dim. approx. 9000x2000 mm
435 1 centrifuge Turbo Separator, LG 14H25, year built 1989, serial number 1425646, centrifuge, filling capacity 35 kg, 3000 rpm
436A 1 cabinet cabinet with spare parts
438 1 vertical continuous flow dryer Maas, VDH 352-63, year built 1999, serial number 1008, vertical continuous flow dryer, PCB format 610x610 mm/350x400 mm, PCB thickness 0,3 - 3 mm, heating capacity 140 kW, dim. approx. 18.000x2500x3000 mm, useable space 12,8 m³, steam room 18,7 m³, max. temperature 170 °C
439 1 roller conveyor roller conveyor, dim. approx. 800x800 mm
440 1 removal station Kuttler, MUE 60, year built 1999, serial number 2244, removal station, with "Kuttler" control, PCB thickness 0,2 - 4,2 mm
441 1 buffer station Kuttler, MB 60, year built 1999, serial number 2245, buffer station, PCB thickness 0,2 - 4,2 mm
442 10 transport trolleys Kuttler, transport trolleys
443 10 transport trolleys Kuttler, transport trolleys
444 1 loading station Löhr + Herrmann, loading station
445 1 solder resist exposure line Schmiedeskamp, 3/4 SM4, year built 1999, serial number 011, solder resist exposure line, infeed width approx. 670 mm, dim. approx. 4000x2000 mm
446 1 removal station Löhr + Herrmann, removal station, working width approx. 670 mm
446A 1 cabinet cabinet with spare parts
447 1 lot transport trolleys lot various transport trolleys, approx. 15 pieces
448 1 loader Löhr + Herrmann, loader, working width approx. 700 mm
449 1 UV-dryer Beltron, 80/120W/II+II, year built 1998, serial number 6911097, UV-dryer, dim. approx. 2000x2000 mm, cap. 4000 mg/cm², max. film width 700 mm, PCB formats 250x300 mm, 720x760 mm, PCB thickness 0,4 - 5 mm
450 1 cooling line Beltron, KM 2000, year built 1998, serial number 6921097, cooling line with meshband conveyor, dim. approx. 3000x2000 mm, meshband width approx. 750 mm, infeed height approx. 30 mm, transport speed 1 - 6 m/min.
451 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
452 1 table table with magnifier
453 1 table table with magnifier
454 1 double magnifier Olympus, double magnifier
455 9 transport trolley Kuttler, transport trolley
455 10 PCB transport trolleys Kuttler, PCB transport trolleys
456 10 transport trolley transport trolley
457 1 loader Schmid, Vaculine, year built 1999, serial number 87-98-388, loader, with "Siemens" control Coros OP 7, max. working width approx. 600 mm, with vacuum handling
458 1 chemical pre-cleaning Schmid, 25-02-189, year built 2002, chemical pre-cleaning, with "Siemens" control Simatic OP 17, with switch cabinet
459 1 centrifuge Schmid/Turbo Separatur, Cecumat IV/36-02-190, year built 2002, centrifuge, filling capacity 35 kg, 3000 rpm
460 1 removal station Schmid, Vaculine, year built 1999, serial number 87-98-389, removal station, with "Siemens" control Sinumatic OP 7, with vacuum handling
461 3 switch cabinets Schmid, switch cabinets
462 1 hand laminator BASF, year built 1989, serial number 80012, hand laminator, max. working width approx. 600 mm
463 1 input station Löhr + Herrmann, input station, max. working width approx. 700 mm
464 1 cleaner Rayon, RY 505 E, serial number RP11660, cleaner, max. working width approx. 600 mm
465 1 automatic laminator Dynachem, 1600 IV, year built 1991, serial number 06201031, automatic laminator, max. working width 800 mm, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
466 1 cooling unit Löhr + Herrmann, AKE 12, year built 1989, serial number 2200201/94, cooling unit
467 1 removal station Löhr + Herrmann, removal station, working width approx. 750 mm
468 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
469 1 transfer station transfer station, dim. approx. 350x750 mm
470 1 pre-heating Morton, 830, year built 1996, serial number 07101042, pre-heating, infeed 5 m/min., thickness 0,1 - 5 mm
471 1 cleaner Toyo, Qui-Clean-Blow 3-S, year built 1996, serial number 9601631, cleaner
472 1 automatic laminator Dynachem/Morton, 1600 IV, year built 1996, serial number 06201116, automatic laminator, PCB formats: length min. 210 mm, width min. 120 mm, max. 762 mm, thickness 0,1 - 5 mm
473 1 cooling unit Löhr + Herrmann, AKE, year built 1989, serial number 22002DDD101, cooling unit
474 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
475 5 ball tables ball tables, dim. approx. 2000x1000 mm
476 1 trestle trestle for laminating rolls
477 8 transport trolleys transport trolleys
478 1 shelving system shelving system with maschine parts, length approx. 3000 mm
479 1 mandrel cart mandrel cart
480 1 light table light table, dim. approx. 1000x800 mm
481 7 ball tables ball tables, dim. approx. 2000x1000 mm
482 1 lot transport trolleys lot transport trolleys, approx. 35 pieces
483 1 light table light table, dim. approx. 1000x600 mm
484 1 light table light table, dim. approx. 1200x800 mm
485 1 vertical cleaner Teknek, VCM750MUF3/230/50, year built 1999, serial number 8014, vertical cleaner
486 1 light table light table, dim. approx. 800x600 mm
487 1 exposure unit ORC, Opti-Beam, serial number 162/163, exposure unit, max. working surface approx. 800x650 mm
487A 1 exposure unit ORC, Opti-Beam, exposure unit, max. working surface approx. 800x650 mm
488 1 input station Löhr + Herrmann, input station, working width approx. 700 mm
489 1 cleaner Mikro Klean, cleaner
490 1 exposure machine Hakuto, 5010 C, year built 1992, serial number EP166, exposure machine, PCB formats 330x250 mm, 610x510 mm, PCB thickness 0,1 - 2,0 mm, image recognition via CCD camera
491 1 removal station Löhr + Herrmann, removal station, working width approx. 700 mm
492 1 loader Löhr + Herrmann, loader, working width approx. 800 mm
493 1 cleaner Rayon, RY 505 E, year built 1990, serial number RP11843, cleaner
494 1 exposure machine Süss Microtec, MA 600 PCB, year built 2004, serial number 022, exposure machine, PCB formats 636x636 mm, working direction right/left, accuracy +/- 15 µm, with "Siemens" control, type Simatic MP 270
495 1 transfer station transfer station
496 1 removal station Löhr + Herrmann, removal station, working width approx. 800 mm
497 1 cabinet cabinet with various exposure unit-accessories
498 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
499 1 cabinet for drawings cabinet for drawings with contents, 10 drawers
500 2 tables tables with 1 magnifier
501 1 cabinet cabinet with contents (glas panes)
502 1 cabinet cabinet with contents (glas panes)
503 1 writing desk writing desk with magnifier
504 1 industrial vacuum cleaner Kränzle, Vento 25, industrial vacuum cleaner
505 1 loader Löhr + Herrmann, loader, working width approx. 600 mm
506 1 cover sheet remover Löhr + Herrmann, cover sheet remover
507 1 buffer Löhr + Herrmann, buffer, working width approx. 700 mm
508 1 conveyor belt conveyor belt, dim. approx. 1000x700 mm
509 1 exposure line Höllmüller, CS 65 R/L, year built 1994, serial number 2282, exposure line, working direction right/left
510 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
511 1 loading station Höllmüller, loading station, working width approx. 700 mm
514 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
515 1 conveyor belt conveyor belt, dim. approx. 800x800 mm
516 1 exposure line Höllmüller, STDM-FHKY/65, year built 1984, serial number 2282/1-4, exposure line
517 1 outfeed station Löhr + Herrmann, outfeed station, working width approx. 700 mm
518 1 double magnifier Olympus, double magnifier with table
519 1 table table with magnifier
520 1 table table with magnifier
521 10 transport trolleys various transport trolleys
522 1 cleaning station Büttner, cleaning station, dim. approx. 1500x1000x1800 mm
523 1 lot overlays lot overlays for transport trolleys, approx. 100 pieces
524 1 table table with magnifier
525 1 rack rack with machine accessories
526 1 plotter Orbotech, LP 5008X, year built 1995, plotter
527 1 film developer Orbitech, Multiline Pro 72, year built 2001, film developer
528 1 plotter Orbotech, LP 5008X, year built 1994, plotter
529 1 film developer Orbitech, Multiline Pro 72, year built 2000, film developer
530 1 micro modifier 5500 XP, micro modifier
531 1 film punch Multi Line, Opti Line, year built 1990, film punch, external layers, table dim. 800x640 mm
532 1 Diazo copier Theimer, Spektra Proof Daylight 95, Diazo copier
533 1 Diazo dry developer Hela, Diazo dry developer
534 1 anti-static auto film cleaner anti-static auto film cleaner
535 1 film sealing device Maguefa, film sealing device, working width 640 mm
536 1 transmitted light densitometer X-Rite, transmitted light densitometer
537 1 lot machine spare parts lot machine spare parts and installation material, a.o. pumps, electric motors, plastic tubes, with racks and 4 lockers
538 1 pre-heater Dynachem, 830, pre-heater
539 6 industrial vacuum cleaning unit Riba, VS 5159, industrial vacuum cleaning unit
540 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, vacuum pumps, pumps
541 1 lot spare parts lot various spare parts, a.o. electric motors, hoses, pumps and various installation material
542 1 lot installation material lot installation material and various spare parts, a.o. obsolete drilling spindles, drives
544 1 gas scrubber VSS, KFVG 1000, gas scrubber, air volume max. 4000 Nm³/h, contaminants HCI, receiver 500 l, with switch cabinet
545 1 chemical supply and disposal plant chemical supply and disposal plant for DES-plant, consisting of: 3 containers, etching buffer container 2,5 m³, soda solution 2,5 m³, potassium hydroxide solution 2,5 m³, with accessories
546 1 storage container storage container (MEC-Brite), with pump
547 1 container container Epsom salt, with pump
Lot Number Description
General conditions Live veiling (+ webcast) TroostwijkAuctions.com
General Terms and Conditions of Auction
1. The auction is exclusively carried out on the basis of the general conditions of auction. When participating in the auction, visitors and customers acknowledge and accept these conditions.
2. The general conditions of auction also apply for private treaty sales apart from any auction.
3. By entering the viewing premises and auction hall, visitors, potential buyers, buyers and their representatives waive explicitly all rights to claim compensation from the auctioneer or its client for damage to their person or property.
4. Each person attending shall be held liable for any damages caused by him during the viewing, auction, dismantling and removal of the goods.
5. The auction takes place in the name of and for the account of the client.
6. The items to be auctioned are specified in the auction catalogue. As a rule, auctioning proceeds according to consecutive catalogue numbers. Troostwijk is entitled to combine, to delete and to change the sequence (of) catalogue numbers in course of the auction.
7. Troostwijk is only liable for preparation and implementation of the auction in accordance with statutory rules. Otherwise the following applies:
a) Claims by the client or the auction buyer, which are based on breaches of duty, in particular with regard to any advice on matters of valuation and to defect or incomplete objects, are excluded.
b) Descriptions of items by Troostwijk, e.g. in the sales catalogue or in a list, are based on information supplied by the client. Troostwijk is only liable for correct transmission and not for the objective accuracy of such information.
c) Specifications are supplied by Troostwijk only in order to help distinguishing items and do in no case represent a guarantee within the meaning of § 444 German Civil Code or an agreement as to the characteristics of items of sale within the meaning of § 434 Section 1 Sentence 1 German Civil Code.
d) The items are used. Troostwijk does not sell in its own name and thus accepts no liability for material or legal defects and is not responsible for volume, quality, dimensions, years of manufacture or completeness.
e) The above restrictions do not apply, if Troostwijk acts deliberately or by gross negligence or if physical injuries are caused.
8. The client is liable to the auction buyer for defects of items under the condition of following regulations:
a) The auction buyer had the opportunity for a prior inspection of the items. The sale is concluded as seen and any guarantee for material or legal defects is excluded.
b) The client excludes any liability with respect to particular characteristics or to the possibility of regular use of the items.
c) The client excludes any liability for advertising statements by the manufacturer.
d) The above restrictions do not apply if the client deliberately causes damage or is guilty of gross negligence or if physical injury is caused.
e) Consumers as defined in the German Civil Code are subject to the statutory rules relating to defects. The limitation period is shortened to 1 year.
9. Accepted is the bid of the highest bidder after the highest bid has been repeated three times by the auctioneer and still higher bids have not been received.
The auctioneer has the right to decline bids, to reject bids regarded as too low and to refuse and withdraw acceptance of bids, respectively to accept a bid only under reservation, if there are particular reasons for doing so.
If a bid is accepted under reservation, this does not represent the right to purchase the lot. As from the call-on the bidder will be bound to his bid for a certain period of time as agreed upon between the two parties.
10. If several persons make the same bid and if no higher bid is made after three calls, the sale will be decided by casting lots.
The auctioneer may revoke his acceptance of a bid and offer the item in question again, if a higher bid made in time was not noticed by error provided the bidder complains immediately or if the acceptance was in any other way questionable.
11. In all cases of doubt as to the validity of the highest bid, in particular if the highest bidder does not want to maintain his bid or if there is doubt about the knockdown, the decision of the auctioneer alone will be binding.
12. Troostwijk may also permit written bids, these to be submitted before the auction. If an item is not clearly identified, the catalogue number will be decisive. Such bids imply unreserved acceptance of these general conditions of auction. The price offered in writing will be regarded as the knockdown price subject to the addition of auctioning charge and legal value added tax (VAT). The amount of a written bid must be announced to the audience before the auctioning of the item concerned begins. By submitting a written bid the bidder authorises the auctioneer to disclose the bid and to accept the knockdown.
13. When a sale has been made the buyer must immediately pay Troostwijk a deposit of at least 50% of the purchase price in cash or by bank certified crossed cheque, for which Troostwijk will issue a receipt. All payments must be made in € (Euro). No other form of payment will be accepted. The remainder must be paid at the latest on one of the collection days specified in these general conditions of auction, however before the start of dismantling/collection.
14. The purchaser owes the client the purchase price in € (Euro), which consists of the net amount, an auctioning charge (see Special Conditions) and possible value added tax (VAT) ex foundation, ex store or ex location. After full payment the auction buyer will receive an invoice as evidence of payment during the auction or upon collection. All invoices issued during or after the auction are under reserve and subject to later control and possible correction. The right to correct errors is reserved.
15. On knockdown the risk of accidental destruction of items purchased as well as the risk of loss or damage by fire, theft and burglary passes to the auction buyer.
16. Knockdown obliges the buyer to accept and pay for the goods. If a buyer refuses to accept goods or fails to pay the full purchase price, including any premium or remaining amounts when due, interest will be charged at the statutory rate. In the case of a delay in payment or acceptance Troostwijk may also claim compensation as provided by law.
17. The compensation may be covered by selling the item in an auction to another buyer. Any costs thus incurred or possible difference resulting from a lower sales price shall be borne by the first auction buyer. Troostwijk may offset its claims against payments already received. The first auction buyer is not entitled to claim any positive proceeds obtained from such a resale.
18. Surrender or disassembling of the auctioned items may only occur after complete payment has been received. All rights of ownership of the items shall remain with the original owner until full payment has been received.
19. Troostwijk reserves the right to demand payment of a security deposit for objects which, when being dismantled, could cause damage to real estate and/or property of third parties. The objects in question and the amount of the deposits required will be announced during the auction.
20. Dismantling and removal have to be accomplished within the deadlines agreed upon with Troostwijk and its client. Collection of the auctioned goods can be effected after complete payment. Removal will not be possible on Saturdays, Sundays and national holidays. The purchaser will be held liable for any costs arising in the event of non-compliance with the specified collection deadline or date.
21. Place of jurisdiction and performance for claims against Troostwijk is exclusively Cologne. German law applies and the provisions of the UN Uniform Law Relating to the International Sale of Goods are hereby excluded.
22. If any of the above terms are wholly or partly invalid, this will not affect the validity of the remaining terms.
Important information for foreign customers: Transmittal of the invoice and delivery of the acquired merchandise will only take place after payment in full either by cash, bank certified crossed cheque or by irrevocable payment into our account.
The auctioneer is justified to charge the buyer with a bank charge of a percentage of 1.5 thousandth part of each amount for cashing foreign cheques and for payments into our account.
Customers from countries not belonging to the European Community: Foreign buyers from countries not belonging to the European Community have to pay the legal German VAT as deposit to the auctioneer.
After receipt of the original export documents, which must be stamped officially to prove that the export has taken place, the auctioneer will then refund the paid German VAT.
Customers from countries belonging to the European Community: All foreign buyers from countries belonging to the European Community must inform us of their VAT NUMBER (VAT-id.no.) to the auctioneer.
If a buyer does not furnish this proof, the auctioneer has to charge the legal German VAT. This VAT amount cannot be refunded.
www.TroostwijkAuctions.com
General Terms and Conditions of Auction
1. The auction is exclusively carried out on the basis of the general conditions of auction. When participating in the auction, visitors and customers acknowledge and accept these conditions.
2. The general conditions of auction also apply for private treaty sales apart from any auction.
3. By entering the viewing premises and auction hall, visitors, potential buyers, buyers and their representatives waive explicitly all rights to claim compensation from the auctioneer or its client for damage to their person or property.
4. Each person attending shall be held liable for any damages caused by him during the viewing, auction, dismantling and removal of the goods.
5. The auction takes place in the name of and for the account of the client.
6. The items to be auctioned are specified in the auction catalogue. As a rule, auctioning proceeds according to consecutive catalogue numbers. Troostwijk is entitled to combine, to delete and to change the sequence (of) catalogue numbers in course of the auction.
7. Troostwijk is only liable for preparation and implementation of the auction in accordance with statutory rules. Otherwise the following applies:
a) Claims by the client or the auction buyer, which are based on breaches of duty, in particular with regard to any advice on matters of valuation and to defect or incomplete objects, are excluded.
b) Descriptions of items by Troostwijk, e.g. in the sales catalogue or in a list, are based on information supplied by the client. Troostwijk is only liable for correct transmission and not for the objective accuracy of such information.
c) Specifications are supplied by Troostwijk only in order to help distinguishing items and do in no case represent a guarantee within the meaning of § 444 German Civil Code or an agreement as to the characteristics of items of sale within the meaning of § 434 Section 1 Sentence 1 German Civil Code.
d) The items are used. Troostwijk does not sell in its own name and thus accepts no liability for material or legal defects and is not responsible for volume, quality, dimensions, years of manufacture or completeness.
e) The above restrictions do not apply, if Troostwijk acts deliberately or by gross negligence or if physical injuries are caused.
8. The client is liable to the auction buyer for defects of items under the condition of following regulations:
a) The auction buyer had the opportunity for a prior inspection of the items. The sale is concluded as seen and any guarantee for material or legal defects is excluded.
b) The client excludes any liability with respect to particular characteristics or to the possibility of regular use of the items.
c) The client excludes any liability for advertising statements by the manufacturer.
d) The above restrictions do not apply if the client deliberately causes damage or is guilty of gross negligence or if physical injury is caused.
e) Consumers as defined in the German Civil Code are subject to the statutory rules relating to defects. The limitation period is shortened to 1 year.
9. Accepted is the bid of the highest bidder after the highest bid has been repeated three times by the auctioneer and still higher bids have not been received.
The auctioneer has the right to decline bids, to reject bids regarded as too low and to refuse and withdraw acceptance of bids, respectively to accept a bid only under reservation, if there are particular reasons for doing so.
If a bid is accepted under reservation, this does not represent the right to purchase the lot. As from the call-on the bidder will be bound to his bid for a certain period of time as agreed upon between the two parties.
10. If several persons make the same bid and if no higher bid is made after three calls, the sale will be decided by casting lots.
The auctioneer may revoke his acceptance of a bid and offer the item in question again, if a higher bid made in time was not noticed by error provided the bidder complains immediately or if the acceptance was in any other way questionable.
11. In all cases of doubt as to the validity of the highest bid, in particular if the highest bidder does not want to maintain his bid or if there is doubt about the knockdown, the decision of the auctioneer alone will be binding.
12. Troostwijk may also permit written bids, these to be submitted before the auction. If an item is not clearly identified, the catalogue number will be decisive. Such bids imply unreserved acceptance of these general conditions of auction. The price offered in writing will be regarded as the knockdown price subject to the addition of auctioning charge and legal value added tax (VAT). The amount of a written bid must be announced to the audience before the auctioning of the item concerned begins. By submitting a written bid the bidder authorises the auctioneer to disclose the bid and to accept the knockdown.
13. When a sale has been made the buyer must immediately pay Troostwijk a deposit of at least 50% of the purchase price in cash or by bank certified crossed cheque, for which Troostwijk will issue a receipt. All payments must be made in € (Euro). No other form of payment will be accepted. The remainder must be paid at the latest on one of the collection days specified in these general conditions of auction, however before the start of dismantling/collection.
14. The purchaser owes the client the purchase price in € (Euro), which consists of the net amount, an auctioning charge (see Special Conditions) and possible value added tax (VAT) ex foundation, ex store or ex location. After full payment the auction buyer will receive an invoice as evidence of payment during the auction or upon collection. All invoices issued during or after the auction are under reserve and subject to later control and possible correction. The right to correct errors is reserved.
15. On knockdown the risk of accidental destruction of items purchased as well as the risk of loss or damage by fire, theft and burglary passes to the auction buyer.
16. Knockdown obliges the buyer to accept and pay for the goods. If a buyer refuses to accept goods or fails to pay the full purchase price, including any premium or remaining amounts when due, interest will be charged at the statutory rate. In the case of a delay in payment or acceptance Troostwijk may also claim compensation as provided by law.
17. The compensation may be covered by selling the item in an auction to another buyer. Any costs thus incurred or possible difference resulting from a lower sales price shall be borne by the first auction buyer. Troostwijk may offset its claims against payments already received. The first auction buyer is not entitled to claim any positive proceeds obtained from such a resale.
18. Surrender or disassembling of the auctioned items may only occur after complete payment has been received. All rights of ownership of the items shall remain with the original owner until full payment has been received.
19. Troostwijk reserves the right to demand payment of a security deposit for objects which, when being dismantled, could cause damage to real estate and/or property of third parties. The objects in question and the amount of the deposits required will be announced during the auction.
20. Dismantling and removal have to be accomplished within the deadlines agreed upon with Troostwijk and its client. Collection of the auctioned goods can be effected after complete payment. Removal will not be possible on Saturdays, Sundays and national holidays. The purchaser will be held liable for any costs arising in the event of non-compliance with the specified collection deadline or date.
21. Place of jurisdiction and performance for claims against Troostwijk is exclusively Cologne. German law applies and the provisions of the UN Uniform Law Relating to the International Sale of Goods are hereby excluded.
22. If any of the above terms are wholly or partly invalid, this will not affect the validity of the remaining terms.
Important information for foreign customers: Transmittal of the invoice and delivery of the acquired merchandise will only take place after payment in full either by cash, bank certified crossed cheque or by irrevocable payment into our account.
The auctioneer is justified to charge the buyer with a bank charge of a percentage of 1.5 thousandth part of each amount for cashing foreign cheques and for payments into our account.
Customers from countries not belonging to the European Community: Foreign buyers from countries not belonging to the European Community have to pay the legal German VAT as deposit to the auctioneer.
After receipt of the original export documents, which must be stamped officially to prove that the export has taken place, the auctioneer will then refund the paid German VAT.
Customers from countries belonging to the European Community: All foreign buyers from countries belonging to the European Community must inform us of their VAT NUMBER (VAT-id.no.) to the auctioneer.
If a buyer does not furnish this proof, the auctioneer has to charge the legal German VAT. This VAT amount cannot be refunded.
www.TroostwijkAuctions.com