Post on 24-Feb-2018
www.gnci.org
Product Product
Catalog Catalog
Main Phone # 870-248-9901 Fax # 870-248-9905
Website: www.gnci.org Email Sequence: firstname@gnci.org
Sales:
Inside Sales…….………………... Ext 1 Email……………………..sales@gnci.org
Custom Pricing:
Price Coordinator………….. Ext 151
Invoicing/Accounts Receivable:
Accounts Receivable………… Ext 116
Service/Warranty:
Email………………..warranty@gnci.org
www.gnci.org
Key Contacts
www.gnci.org
About GNC Industries, Inc.:
Since 1983, GNC Industries, Inc. has been developing and manufacturing industrial spray equipment for the Lawn Care, Golf, Pest Control, Parks & Recreation, and Tree Care Indus-tries.
GNC Industries, Inc. is far from an impersonal assembly-line. Our hands-on approach assures only quality products leave our facility. At each step of the way , there are craftsmen, proud of their work and determined to apply their skills towards a flawless, high quality piece of equip-ment.
Manufacturing Facility:
GNC’s manufacturing facility is located on 5 acres with over 40,000 square feet of enclosed manufacturing area. Our manufacturing process includes robotic welding, water jet precision cuts, plus full assembly and testing completed 100% in house. This allows GNC to keep the highest quality control possible while minimizing lead times.
To support our vast manufacturing capabilities, GNC keeps a large amount of inventory on
hand which allows us to build a custom unit within just a few days, or do a production run of
100+ within 10 business days.
Shipping Lead Times:
In 2015, GNC’s average lead time from order entry to shipping was the fastest in the industry.
Plus, GNC is centrally located in Arkansas, which enables us to ship anywhere within the Unit-
ed States in a timely and cost effective manner.
Technical Support and Customer Service:
In addition to 75 years of combined industry knowledge, GNC has a degreed engineer on staff
to assist with technical questions. GNC‘s expertly trained customer service staff is here to help
with equipment selections, custom designs, maintenance questions and more.
GNC Industries, Inc.
www.gnci.org
What do I need to know?
What size truck do you have? 100 gallon and under are approved for most trucks and some UTV’s 200 gallon minimum requirement 1/2 Ton 300 gallon minimum requirement 3/4 Ton 400 + gallon minimum requirement 1 Ton
Pump Selection: 8-10 GPM Pumps, most common for Pest Control, Lawn Care and small Tree
Spraying Piston P530 with 6.0 HP Manual Start Subaru Diaphragm Kappa 43 with 6.0 HP Manual Start Subaru
15-20 GPM Pumps, most common for large Tree Spraying, Lawn Care & Pest Control that requires heavy agitation or dual operators
Piston P550 with 9 HP Electric Start Subaru Diaphragm Kappa 55 with 9 HP Electric Start Subaru
Electric or Manual Reel? Keep in mind electric reels must have a battery source hooked up to them and
*MUST* be grounded DIRECTLY to the same frame as the battery source
What size Hose? 3/8” & 1/2” are most common 5/8” & 3/4” are custom orders and used mainly in large tree application See hose package section for details
How are you going to apply it? Gun/Boom? 11-855-00 Do-All Gun Kit – Most applications 11-857-00 Mag-2000– Low pressure lawn spraying ONLY 11-854-01 Mighty Lite—Medium tree & shrub spraying 11-854-00 Might Mag– Large tree spraying 11-856-00 Mag-1 Root Feeder– Soil injection root feeding trees 23-BM-8500 Boomless Boom 12-15 ft. swath- Open area herbicide application 23-BM-8501 Multi Nozzle De-Icing Boom– Targeted road way application 23-BM-8504E 16ft Boom with Electronic Controls– Targeted herbicide application 23-BM-8504M 16ft Boom with Manual Controls– Targeted herbicide application
www.gnci.org
How to Order a Complete Sprayer
Step 1: Base Sprayer Base includes:
Tank Pump Subaru Engine w/5 Yr. Mfg. Warranty Suction Filter Ventura Jet Agitation Stainless Steel Frame (under 600 gal)
Note: With an additional charge and lead time, other engine options are available
Step 2: Hose Reel Package Package includes:
Reel w/Stainless Steel Swivel Hose w/Brass Swivel Fittings
Note: Electric reels include wire harness, button, solenoid, circuit breaker and testing
Step 3: Accessories (optional)
Spray Gun Root Feeder Roller Guides Quick Disconnects Booms
www.gnci.org
Shurflo, 3 GPM 12 Volt Pump, Manual Hannay Hose Reel w/Super Swivel, 3/8” X 200’ High Pressure, Chemical Resistant Hose
Manual Reel P/N #: 25-GNC-02CPB2-SH
Weight: Manual Reel: 65# Shipping Weight: 235#
Dimensions: 40.5” Wide x 21.5” Deep 17” Top of Pump, 12.5” Top of Tank, X 34” Top of Reel
P530 with Subaru 6.0 HP Manual Start Engine, Hannay Hose Reel w/ Super Swivel, 3/8” X 200’ Hose
Electric Reel P/N #: 25-GNC-95CP82-P530 Manual Reel P/N #: 25-GNC-95CP92-P530
Weight: Electric Reel: 195# Shipping Weight: 350# Manual Reel: 175# Shipping Weight: 330#
Dimensions: 45” Wide x 24” Deep 38.5” Top of Pump, 22” Top of Risers, 41.5” Top of Reel
P530 with Subaru 6.0 HP Manual Start Engine, Hannay Hose Reel w/Super Swivel, 1/2” X 300’ Hose
Electric Reel P/N #: 25-GNC-91PC60-P530 Manual Reel P/N #: 25-GNC-91PC70-P530
Weight: Electric Reel: 295# Shipping Weight: 485# Manual Reel: 275# Shipping Weight: 465#
Dimensions: 40.5” Wide x 56” Deep 20” Top of Risers, 30” Top of Tank, 39.5” Top of Reel
Top Selling Package Units
025 Gallon
050 Gallon
100 Gallon
Honda engine swap additional line item: 24-EN-HM55UG
www.gnci.org
Top Selling Space Saver Base Units
P/N #: 21-GNC-91SSXX-P530
P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 195# Dimensions: 37.5” Top of Pump (16” Top of Tank) x 60” Wide Foot Print: 48” Wide X 39” Deep
P/N #: 21-GNC-92SSXX-P530
P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 235# Dimensions: 46” Top of Pump (29” Top of Tank) x 72” Wide Foot Print: 48” Wide X 41” Deep with Frame (42.5” at Tabs)
P/N #: 21-GNC-93SSXX-P530
P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 245# Dimensions: 52” Top of Pump (35” Top of Tank) x 72” Wide Foot Print: 48” Wide X 41” Deep with Frame (42.5” at Tabs)
P/N #: 21-GNC-94SSXX-P530
P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 320# Dimensions: 52” Top of Pump (35” Top of Tank) x 72” Wide Foot Print: 48” Wide X 58.5” Deep with Frame (60” at Tabs)
GNC Space Saver sprayers are the most space efficient sprayer on the market. Featuring rotational molded, UV protected poly tanks, durable enough to handle liquid de-icing material.
Standard units are equipped with GNC’s P-Series Piston Pump, Subaru Engines (backed by a 5 year Subaru supported warranty), stainless steel framing on 200, 300 & 400 gallon units. The 075 & 100 gallon units have stainless steel support brackets. Jet agitation, airgap/back flow preventions, hinged lockable lids with lock and reel mounting supports come standard on all GNC Space Saver sprayers.
100 Gallon
200 Gallon
300 Gallon
400 Gallon
Approved for Most Trucks Approved for Some UTV’s
Truck: 1/2 Ton Min Mechanical Agitation Available
Truck: 3/4 Ton Min Mechanical Agitation Available
Truck: 1 Ton Min Mechanical Agitation Available
Honda engine swap additional line item: 24-EN-HM55UG
www.gnci.org
Top Selling In-Line Base Units
P/N #: 21-GNC-92PCXX-P530
P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 240# Dimensions: 40.5” Wide x 70” Deep 26” Top of Risers, 39” Top of Tank, 46.5” Top of Reel
P/N #: 21-GNC-93LGXX-P530
P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 315# Dimensions: 40.5” Wide x 88” Deep 21” Top of Risers, 48” Top of Tank, 41” Top of Reel
P/N #: 21-GNC-95LGXX-P530
P530 with Subaru 6.0 HP Manual Start Engine Equipment Base Weight: 380# Dimensions: 49.5” Wide x 96“ Deep 21” Top of Risers, 55” Top of Tank, 41” Top of Reel
GNC Skid mounted commercial base sprayers are built for industrial use. These units are built to be used in Lawn Care, Pest Control, Tree Service and many other markets.
Standard units are equipped with GNC’s P-Series Piston Pump, Subaru Engine (backed by a 5 year Subaru supported warranty), stainless steel frame, ventura jet agitation, airgap/back flow preventions, hinged lockable lids with lock and standard hose reel pre-drilled mounting areas.
Minimum truck: 1/2 Ton 18” Hose Reel Package Required
200 Gallon
300 Gallon
500 Gallon
Minimum truck: 3/4 Ton 18” Hose Reel Package Required
Minimum truck: 1 Ton 18” Hose Reel Package Required
Honda engine swap additional line item: 24-EN-HM55UG
www.gnci.org
Top Selling Cross Mount Base Units
050 Gallon P/N #: 21-GNC-95LPXX-P530 P530 with Subaru 6.0 HP Manual Start Engine
Equipment Base Weight: 155# Dimensions: 40.5” Wide x 48” Deep 24” Top of Pump, 22” Top of Tank, 23” Top of Reel
P/N #: 21-GNC-91LPXX-P530 P530 with Subaru 6.0 HP Manual Start Engine
Equipment Base Weight: 160# Dimensions: 40.5” Wide x 56” Deep 24” Top of Pump, 30” Top of Tank, 23” Top of Reel
P/N #: 21-GNC-91PCXX-P530 P530 with Subaru 6.0 HP Manual Start Engine
Equipment Base Weight: 170# Dimensions: 40.5” Wide x 56” Deep 20” Top of Risers, 30” Top of Tank, 39.5” Top of Reel
GNC Skid mounted commercial base sprayers are built for industrial use. These units are built to be used in Lawn Care, Pest Control, Tree Service and many other markets. Standard units are equipped with GNC’s P-Series Piston Pump or Udor Kappa 43GR Dia-phragm Pump, Subaru Engine (backed by a 5 year Subaru supported warranty), stainless steel frame, ventura jet agitation, airgap/back flow preventions, hinged lockable lids with lock and standard hose reel pre-drilled mounting areas.
Approved for Most Trucks 12” Hose Reel Package Required
100 Gallon
100 Gallon
Approved for Most Trucks 12” Hose Reel Package Required
Approved for Most Trucks 18” Hose Reel Package Required
Honda engine swap additional line item: 24-EN-HM55UG
www.gnci.org
Top Selling Hose Reel Packages
Part No. Description
84-HA-1526-E32 Hannay 18" Electric Reel, 300ft of 1/2" Hose, with Button, Solenoid, Circuit Breaker & Wire Harness (Roller Guides sold separately HA-9939-1018)
84-HA-1526-E43 Hannay 18" Electric Reel, 400ft of 3/8" Hose, with Button, Solenoid, Circuit Breaker & Wire Harness (Roller Guides sold separately HA-9939-1018)
84-HA-1526-M32 Hannay 18" Manual, 300ft of 1/2" Hose (Roller Guides sold separately HA-9939-1018)
84-HA-1526-M43 Hannay 18" Manual Reel, 400ft of 3/8" Hose (Roller Guides sold separately HA-9939-1018)
Standard 18” Reels *NOT Available on Compact or Low Profile Mounted Base Units
Part No. Description
84-HA-1520-E23
Hannay 12" Electric Reel, 200ft of 3/8" Hose, with
Button, Solenoid, Circuit Breaker & Wire Harness
(Roller Guides sold separately HA-9939-1012)
84-HA-1520-E33
Hannay 12" Electric Reel, 300ft of 3/8" Hose, W/ But-
ton, Solenoid, Circuit Breaker & Wire Harness
(Roller Guides sold separately HA-9939-1012)
84-HA-1520-M23 Hannay 12" Manual Reel, 200ft of 3/8" Hose
(Roller Guides sold separately HA-9939-1012)
84-HA-1520-M33 Hannay 12" Manual Reel, 300ft of 3/8" Hose
(Roller Guides sold separately HA-9939-1012)
Standard 12” Reels *NOT Available on Skid Base Units with Hose Reel Risers
Part No Description—Hose Reel Replacement Parts
22-HR-S12 1/2” Stainless Steel Replacement Swivel Will fit Cox 1125 & Hannay 1500 Series
HA-9915-0042 Hannay 12VDC 1/3HP Replacement Motor
HA-9917-0025 12 Volt Replacement Solenoid
www.gnci.org
Hose
Max PSI 200
(Unless other wise Stated)
Part Number Description Weight
71-PA410-0037C 3/8” Clear Braided Hose Max PSI 200
By the Foot .11 #
71-PA410-0050C 1/2” Clear Braided Hose Max PSI 200
By the Foot .17 #
71-PA410-0075C 3/4” Clear Braided Hose Max PSI 175
By the Foot .21 #
Max Working
PSI 600
(Unless other wise Stated)
71-TW600-0037 3/8” Spray Hose 600 PSI
By the Foot .12 #
71-TW700-0037-
200* 8.5 mm x 200’ Spray Hose 700 PSI 24 #
71-TW600-0037-
200* 3/8” X 200’ Spray Hose 600 PSI 24 #
71-TW600-0037-
300* 3/8” X 300’ Spray Hose 600 PSI 37 #
71-TW600-0037-
400* 3/8” X 400’ Spray Hose 600 PSI 49 #
Max Working
PSI 600
(Unless other wise Stated
71-TW600-0050 1/2” Spray Hose 600 PSI
By the Foot .15 #
71-TW600-0050-
150* 1/2” X 150’ Spray Hose 600 PSI 23 #
71-TW600-0050-
300* 1/2” X 300’ Spray Hose 600 PSI 45 #
71-TW600-0050-
400* 1/2” X 400’ Spray Hose 600 PSI 60 #
Max PSI Varies
(See Description)
71-PA115-0075 ¾” Suction Hose Max PSI 300 .21 #
71-PA115-0100 1” Suction Hose Max PSI 270 .28 #
71-PA115-0114 1-1/4” Suction Hose Max PSI 270 .35 #
71-PA115-0112 1-1/2” Suction Hose Max PSI 270 .48 #
71-PA115-0200 2” Suction Hose Max PSI 210 .67 #
*With Fittings please change beginning part number from 7”1” to 7”4”, All weights are estimates.
www.gnci.org
Top Selling Pump Specs
P530 Piston Pump
Max Flow: 10 GPM Max Pressure: 600 PSI Max Rated Speed: 700 RPM
P550 Piston Pump Max Flow: 15 GPM Max Pressure: 600 PSI Max Rated Speed: 700 RPM
Kappa 43/GR Diaphragm Pump
Max Flow: 10 GPM Max Pressure: 560 PSI Max Rated Speed: 540 RPM
Kappa 55/GR8 Diaphragm Pump
Max Flow: 15 GPM Max Pressure: 560 PSI Max Rated Speed: 540 RPM
Shaft Size: 3/4” Ports: 1” inlet, 1/2” outlet Weight: 30 lbs.
Shaft Size: 1-3/16” Ports: 1-1/4” inlet, 3/4” outlet Weight: 55 lbs.
5-6 HP Gas engine recommended. Pump has built in pressure regu-
lator with dump valve and pulsation dampener. Pumps are set up
to run on a belt and pulley system.
9-11 HP Gas engine recommended. Pump has built in pressure regu-
lator with dump valve and pulsation dampener. Pumps are set up to
run on a belt and pulley system.
Bypass: 3/4” outlet Ports: 1-1/4” inlet, 1/2” outlet Weight: 49 lbs.
Bypass: 3/4” outlet Ports: 1” inlet, 1/2” outlet Weight: 39 lbs.
9-11 HP Gas Engine with 1” shaft. Pump has built in pressure regula-
tor with dump valve. Pumps are set up to run on a direct drive system.
5-6 HP Gas engine with 3/4” shaft. Pump has built in pressure regula-
tor with dump valve. Pumps are set up to run on a direct drive system.
The above pumps are not recommended for bleach/chlorine based products.
www.gnci.org
Electric Pump Specs
RE-5538-2E1-94A
Max Flow: 7.0 GPM Max Pressure: 60 PSI 12Volt
SH-2087-593-135 Max Flow: 3 GPM Max Pressure: 45PSI 12 Volt Demand Switch
SH-2088-394-144 Max Flow: 3 GPM Max Pressure: 50PSI 110/115 Volt A/C
SH-8000-543-238 Max Flow: 1.8 GPM Max Pressure: 100 PSI 12 Volt Demand Switch
Ports: 1/2” MNPT Weight: 6 lbs.
The above pumps are not recommended for bleach/chlorine based products.
Pump Valve
Assembly
Upper
Housing
Drive
Assembly
Pressure
Switch
Complete Head
Assembly
RE-5538-2E1-94A
Fat Boy 12 Volt N/A N/A N/A N/A
SH-2087-593-135
SHURflo 12 Volt 94-232-05 94-231-30 94-238-03 94-230-36 94-236-11
SH-2088-394-144
SHURflo 12 Volt 94-232-05 94-231-30 94-238-03 94-230-36 94-236-11
SH-8000-543-238
SHURflo 12 Volt 94-390-05 94-379-00 94-385-32 94-375-18 N/A
Ports: 1/2” FNPT Weight: 6 lbs.
Ports: 3/8” FNPT Weight: 5 lbs.
Ports: 1/2” MNPT Weight: 6 lbs.
www.gnci.org
Udor Pump Specs
The above pumps are not recommended for bleach/chlorine based products.
Model Max.
GPM
Max
PSI
Inlet/
Outlet/
Bypass
Description Est.
Wt.
UD-Kappa-25/GR 7.0 350
1”
1/2” (2)
3/4”
Two diaphragm pump with pulsation
dampener & control unit with adjustable
pressure regulator, manual dump lever,
dual ball valve outlets & pressure gauge.
Equipped with a gearbox for 3-5.5 HP
gasoline engines with 3/4" shafts.
28
UD-Kappa-43/GR 10.5 560
1”
1/2” (2)
3/4”
Three diaphragm pump with control unit with adjustable pressure regulator, man-ual dump lever, dual ball valve outlets & pressure gauge. Fitted with gearbox for 4-6.5 HP gasoline engines with 3/4" shafts.
39
UD-Kappa-55/GR8 15 560
1-1/4”
1/2” (2)
3/4”
Three diaphragm pump with universal
drive face, pulsation dampener & control
unit with adjustable pressure regulator,
manual dump lever, dual ball valve out-
lets & pressure gauge.KAPPA-55 pump
with gear reduction for 8-11 HP gasoline
engines with 1" shafts.
49
UD-Kappa-55/GR5 15 350
1-1/4”
1/2” (2)
3/4”
Three diaphragm pump with universal
drive face, pulsation dampener & control
unit with adjustable pressure regulator,
manual dump lever, dual ball valve out-
lets & pressure gauge KAPPA-55 pump
with gear reduction for 5-6.5 HP gasoline
engines with 3/4" shafts.
47
UD-Kappa-75/GR 20 560
1-1/4”
1/2” (2)
3/4”
Three diaphragm pump with universal
drive face, pulsation dampener & control
unit with adjustable pressure regulator,
manual dump lever, dual ball valve out-
lets & pressure gauge KAPPA-75 pump
with gear reduction for 9-13 HP gasoline
engines with 1" shafts.
58
UD-RO-70/GR-5 20 300
1-1/4”
3/4”
N/A
RO-70 with gear reduction for use with 5-
6.5 HP gasoline engines with 3/4" shafts.
Recommended control unit: 6047.06/LP.
45
www.gnci.org
Hypro Pump Specs
The above pumps are not recommended for bleach/chlorine based products.
Model Max.
GPM
Max
PSI
Max.
RPM Description
Est.
Wt.
HY-9910-D252
HY-9910-D252GRI 6 290 650
2-diaphragm, ¾” inlet, ½” outlet. Shaft
D252 ¾” solid, D252GR is ¾” or 5/8”
hollow, gear reduced for 2-3.5 hp gas
engine
14
HY-9910-D30
HY-9910-D30AP-P 9.5 580 550
2-diaphragm pump-1” HB inlet, ½” HB
outlet, D30AP-A -3/4” solid extended
shaft. Select shaft kit or gear reduction.
Recommended control unit 9910-
GS40GI, direct gas engine mount, use
gear reduction Kit 1636
23
24
HY-9910-D30GRGI
HY-9910-
D30BGRGI
9.5 580 550
2-diaphragms, with GS40GI control unit &
gear reduction – fits 5 hp gas engine – B
version with Buna-N diaphragms
33
32
HY-9910-D50
HY-9910-D50AP-A 14 580 550
2-diaphrgams, 1-1/4” inlet, ½” outlet, D-
50AP-A 1” solid ext shaft. Recommended
control unit 9910-GS40GI, direct gas en-
gine mount use gear reduction Kit 1642
34
37
HY-9910-D503 14 580 550
3-diaphragm pump -1/” HB inlet, ¾” NPT
outlet. Recommended control unit 9910-
RM40, direct gas engine mount us gear
reduction Kit 1642
28
HY-9910-
D503GRGI 15 580 3600
3-diaphragms, 1-1/4” (M) inlet, ¾” NPT
outlet, shaft flanged adaptor, D503GRGI
has 1” hollow shaft for gas engine mount.
41
www.gnci.org
Pump Kits
Pump Valve Kit Piston or
Diaphragm Kit O-Ring Kit Complete Kit
P530
GNC Piston 43-530-350 43-530-325 N/A 43-530-380
P550
GNC Piston 43-550-550 43-550-525 N/A 43-550-580
P10/TS28
GNC Piston 43-810-350 43-810-325 N/A 43-810-380
P15 (Blue)
GNC Piston 43-815-550 43-815-525 N/A
43-815-580
P15W (Black)
GNC Piston 43-550-550 43-815W-525 N/A 43-815W-580
Iota –17/18/20
Udor Diaphragm N/A 02-8700.01 N/A 02-8700.01/CK
Kappa 25
Udor Diaphragm N/A 02-8700.65 N/A 02-8700.65/CK
Kappa 33/43/53
Udor Diaphragm N/A 02-8700.45 N/A 02-8700.45/CK
Kappa 55
Udor Diaphragm N/A 02-8700.26 N/A 02-8700.26/CK
RO-70
Udor Diaphragm N/A 02-8700.05 N/A 02-8700.05/CK
D252
Hypro Diaphragm 9910-KIT2408 9910-KIT1723 9910-KIT2409 N/A
D30
Hypro Diaphragm 9910-KIT1917 9910-KIT1724 9910-KIT1916 N/A
D50
Hypro Diaphragm 9910-KIT1920 9910-KIT1725 9910-KIT1919 N/A
D403
Hypro Diaphragm 9910-KIT2388 9910-KIT2423 9910-KIT2389 N/A
www.gnci.org
Pump Kits
Pump Regulator
Complete
Regulator
Repair Kit
3/4” Gear Box
5.5-6.5 HP
1” Gear Box
9.0-11HP
P530
GNC Piston 43-530-200 N/A N/A N/A
P550
GNC Piston 43-530-200 N/A N/A N/A
P10/TS28
GNC Piston 43-810-200 43-810-250 N/A N/A
P15 (Blue)
GNC Piston 43-815-200 43-815-250 N/A N/A
P15W (Black)
GNC Piston 43-815W-200 43-815W-250 N/A N/A
Iota –17/18/20
Udor Diaphragm 02-6010.23 02-8701.01 02-5094.76 N/A
Kappa 25
Udor Diaphragm 02-6010.95 02-6062.A9 02-5085.F7 N/A
Kappa 33/43/53
Udor Diaphragm 02-6010.93 02-6062.A9 02-5071.75 N/A
Kappa 55
Udor Diaphragm
GR5= 02-6010.24/LP
GR8= 02-6010.24 02-8701.10 02-5027.75 02-5033.A4
RO-70
Udor Diaphragm
GR5= 02-6047.06/LP
GR8= 02-6047.06 02-8701.02 02-5027.75 02-5033.A4
D252
Hypro Diaphragm 9910-KIT1990 N/A
D30
Hypro Diaphragm 9910-GS40GI 9910-KIT1757 9910-KIT1640 N/A
D50
Hypro Diaphragm 9910-GS40GI 9910-KIT1757 9910-KIT1642 N/A
D403
Hypro Diaphragm 9910-GR40 9910-KIT2488 9910-KIT1640 N/A
www.gnci.org
Ref # Item ID Description
1A 42-530-01 Crankcase
2 42-530-02 Oil Seal for Piston
5 42-530-05 Screw For Crankshaft Oil Seal Cover
6 42-530-06 Oil Seal Cover
7A 42-530-07 Oil Inlet Cover
8 42-530-08 Gasket for Rear Crankcase Cover
9 42-530-09 Crankcase Rear Cover
10 42-530-10 Screw for Crankshaft Rear Cover
11A 42-530-11 Oil Window Assembly
12A 42-530-12 Oil Drainage Plug
13 42-530-13 Crankshaft Key
14 42-530-14 Crankshaft
15A 42-530-15 Connecting Rod Assembly
16 42-530-16 Crankshaft Bearing,
17 42-530-17 Crankshaft Oil Seal
18 42-530-18 Crankshaft Cover
19 42-530-19 Piston Assembly
26 42-530-26 Piston Pin
28 42-530-28S Piston Pump Stand (Short)
28 42-530-28T Piston Pump Stand (Tall)
29A 42-530-29 Bolt Set with Washer
Ref # Item ID Description
31 42-530-31 Pulley with Bolt Set,
40 43-530-335 Cylinder Assembly
41 42-530-41 Bolt Set with Washer
42 42-530-42 Double End Screw W/ Nut Spring
Washer
51A 42-530-51 Suction Chamber Assembly
53 42-530-53 Bolt Set with Washer
60 42-530-60 Connecting Hose with O-Ring
65 42-530-65 Outlet Chamber
70 42-530-70 Plug for Outlet Chamber
74 42-530-74 Air Chamber O-Ring
75 42-530-75 Air Chamber Surge Tank
Feature Kits
43-530-200 P530/550 Pressure Regulator Assembly
43-530-325 P530 Packing Repair Kit
43-530-335 P530 Cylinder Assembly (#40 W/Pkg’ings)
43-530-350 P530 Valve Repair Kit
43-530-380 P530 Rebuild Kit (Pkg & Valve Kit)
Important:
When ordering parts, give PART
NUMBER and PART DESCRIPTION.
Reference Numbers are used only to
point out parts in the drawing and are
NOT to be used as ordering numbers
P530 (P10W)
www.gnci.org
Feature Kits
43-530-200 P530/550 Pressure Reg Assy
43-550-525 P550 Packing Repair Kit
43-550-535 P550 Cylinder Assembly
43-550-550 P550 & P15W Valve Repair Kit
43-550-580 P550 Rebuild Kit
Ref # Item ID Description
1A 42-550-01 Crankcase
2 42-550-02 Oil Seal for Piston
3 42-550-03 Dust Cover
5 42-530-05 Screw For Crankshaft Oil Seal Cover
6 42-550-06 Cover, Oil Seal
7A 42-550-07 Oil Inlet Cover
8 42-550-08 Gasket for Rear Crankcase Cover
9 42-550-09 Rear Cover
10 42-530-10 Screw for Crankshaft Rear Cover
11A 42-530-11 Oil Window Assembly
12A 42-530-12 Oil Drainage Plug Assembly
13 42-530-13 Crankshaft Key
14 42-550-14 Crankshaft,
15A 42-550-15 Connecting Rod Assembly
16 42-550-16 Crankshaft Bearing
17 42-550-17 Crankshaft Oil Seal,
18 42-530-18 Crankshaft Cover
19 42-550-19 Piston Assembly
26 42-550-26 Piston Pin
28 42-550-28 Pump Stand
29A 42-530-29 Bolt Set with Washer,
Ref # Item ID Description
31 42-550-31 Pulley with Bolt Set
40 43-550-335 Cylinder Assembly
41 42-550-41 Cylinder Screw With Washer
42 42-550-42 Double-Ended Screw,
51A 42-550-51 Suction Chamber Assembly
53A 42-550-53 Bolt Set with Washer
54 43-550-550 Valve Assembly, Sold In Kit 43-550-550
60A 42-530-60 Connecting Hose with O-Ring,
65 42-550-65 Outlet Chamber
70 42-550-70 Plug for Outlet Chamber,
74 42-550-74 Air Chamber O-Ring
75 42-550-75 Air Chamber Surge Tank
Important:
When ordering parts, give PART
NUMBER and PART DESCRIPTION.
Reference Numbers are used only to
point out parts in the drawing and are
NOT to be used as ordering numbers
P550
Ref # Item ID Description
146 UD-02-0006.14 Bearing
157 UD-02-0007.05 Seal (KAPPA-33/43)
189 UD-02-0001.11 Retaining Ring (KAPPA-33/43)
240 UD-02-0102.04 Diaphragm Bolt
357 UD-02-0202.18 Suction/Inlet Hose Barb
(30/33/40/43)
513 UD-02-0206.41 Piston Sleeve (KAPPA-43)
540 UD-02-0208.98 Oil Reserve Cap
592 UD-02-0209.73 Crankcase
701 UD-02-0214.05 Bearing
808 UD-02-0301.43 Diaphragm Washer
816 UD-02-0301.54 Spacer (KAPPA-33/43)
817 UD-02-0302.66 Spacer (KAPPA-33/43)
964 UD-02-0501.E2 Body Flange
1038 UD-02-0604.18 Suction/Barb Nut
1075 UD-02-0605.43 Gasket
1192 UD-02-0801.02 Shaft Key
1305 UD-02-0903.43 Piston Diaphragm Buna-N
1381 UD-02-1101.27 O-Ring
1382 UD-02-1101.29 O-Ring
1389 UD-02-1101.41 O-Ring
1421 UD-02-1101.88 O-Ring
1434 UD-02-1101.D1 O-Ring
Ref # Item ID Description
1490 UD-02-1203.27 Oil Reservoir
1570 UD-02-1205.07 Piston
1702 UD-02-6006.01 Valve Assembly
K25/30/33/40/43/53/75/100
1722 UD-02-6017.13 Head- Kappa 25/33/35/43/53/55
1740 UD-02-6033.01 Oil Reservoir Assembly
1828 UD-02-6015.45 Piston/Rod Assembly
1843 UD-02-1403.07 Washer
1844 UD-02-1403.09 Washer
1893 UD-02-1412.03 Washer
1964 UD-02-1502.03 Connecting Rod Pin (Kappa-33/43)
2048 UD-02-1506.15 Snap Ring
2051 UD-02-1506.15 Snap Ring
2136 UD-02-1519.28 Connecting Rod (Kappa-33/43/53)
2251 UD-02-1603.02 Oil Plug
2268 UD-02-1603.32 Head Plug
2587 UD-02-1805.20 Bolt
2589 UD-02-1805.31 Bolt
4801 UD-02-1101.C3 O-Ring
7947 UD-02-1804.21 Head Bolt
8120 UD-02-0903.50 Piston Diaphragm Desmopan
8151 UD-02-1202.63 Mounting Rail - Right Side
8152 UD-02-1202.64 Mounting Rail - Left Side
www.gnci.org
Important:
When ordering parts, give PART
NUMBER and PART DESCRIPTION.
Reference Numbers are used only to
point out parts in the drawing and are
NOT to be used as ordering numbers
Kappa 43
www.gnci.org
Important:
When ordering parts, give PART
NUMBER and PART DESCRIPTION.
Reference Numbers are used only to
point out parts in the drawing and are
NOT to be used as ordering numbers
Kappa 55GR8
Ref # Item ID Description
4 UD-02-0001.06 Retaining Ring
133 UD-02-0006.02 Bearing (KAPPA-30/40/55)
155 UD-02-0007.01 Seal (KAPPA-30/40/55)
240 UD-02-0102.04 Diaphragm Bolt
365 UD-02-0202.52 Suction Elbow (KAPPA-55/75)
500 UD-02-0206.31 Piston Sleeve (KAPPA-55)
523 UD-02-0218.06 Body Plug
540 UD-02-0208.98 Oil Reservoir Cap
569 UD-02-0208.46 Accumulator Head
629 UD-02-0209.44 Pump Body (KAPPA-55)
698 UD-02-0214.01 Ball Bearing
794 UD-02-0301.14 Retainer Washer
803 UD-02-0301.30 Washer (KAPPA-30/40/55)
831 UD-02-0302.50 Spacer (KAPPA-30/40/55)
928 UD-02-0501.85 Flange
1038 UD-02-0604.18 Suction Nut
1072 UD-02-0605.09 Aluminum Gasket
1075 UD-02-0605.43 Gasket
1126 UD-02-0608.16 Air Valve Assembly
1295 UD-02-0903.08 Accumulator Diaphragm
1305 UD-02-0903.43 Piston Diaphragm Buna-N
1376 UD-02-1101.16 O-Ring
1381 UD-02-1101.27 O-Ring
1382 UD-02-1101.29 O-Ring
1386 UD-02-1101.33 O-Ring
1389 UD-02-1101.41 O-Ring
1407 UD-02-1101.62 O-Ring
Ref # Item ID Description
1413 UD-02-1101.87 O-Ring
1434 UD-02-1101.D1 O-Ring
1490 UD-02-1203.27 Oil Reservoir
1570 UD-02-1205.07 Piston
1702 UD-02-6006.01 Valve Assembly
1722 UD-02-6017.13 Head Assembly
1740 UD-02-6033.01 Oil Reservoir Assembly
1799 UD-02-6015.27 Piston/Rod Assembly
1843 UD-02-1403.07 Washer
1844 UD-02-1403.09 Washer
1964 UD-02-1502.03 Connecting Rod Pin
2045 UD-02-1506.01 Snap Ring
2051 UD-02-1506.15 Snap Ring
2150 UD-02-1519.18 Connecting Rod
2251 UD-02-1603.02 Oil Plug
2268 UD-02-1603.32 Head Plug
2271 UD-02-1603.44 Plug
2582 UD-02-1805.04 Bolt
2588 UD-02-1805.21 Bolt
2589 UD-02-1805.31 Bolt
2602 UD-02-1805.25 Head Bolt (Allen-Old Style)
7250 UD-02-0501.02 Seal Retainer
7671 UD-02-1403.09 Washer
7948 UD-02-1804.45 Head Bolt (Hex-New Style)
8120 UD-02-0903.50 Piston Diaphragm Desmopan
8151 UD-02-1202.63 Mounting Rail - Right Side
8152 UD-02-1202.64 Mounting Rail - Left Side
www.gnci.org
Top Selling Accessories
Mag-1 Spray
Gun
11-852-00
GNC Original Mag-1 Spray Gun with Stainless Steel Whirler and Trigger. Used
by Pest Control, Lawn Care, Municipalities, Tree and Shrub Professionals.
Do-All Spray
Gun
11-855-00
GNC Mag-1 Gold Do-All Gun Used by Pest Control, Lawn Care & Tree/Shrub
Professionals. Includes: Spray Gun and 6 Additional Nozzles (3 Lawn Care & 3
Tree/Shrub)
Mag 2000
Lawn Spray
Gun
11-857-00
GNC Mag-2000 Lawn Gun Used by Lawn Care Professionals.
Nozzle sold separately.
12-857-15 Blue/Sm Nozzle; 12-857-16 Yellow/Med Nozzle; 12-857-17 Green/
Lg Nozzle
GI Kit
11-850-00
GNC GI Kit. Includes:
Mag-1 Gold Do-All Gun and 6 Additional Nozzles Used by Pest Control, Lawn
Care & Tree/Shrub Professionals *PLUS* GNC Mag-2000 Lawn Gun used by
Lawn Care Professionals.
Mighty Lite
Spray Gun
11-854-01
GNC Tree Gun. Extremely light weight and easy to use. Comes with 3 nozzles
to accommodate volumes of 1 GPM to 15 GPM. Adjustable barrel for jet
spraying and fine cone mist.
Root Feeder
Spray Gun
11-856-00
GNC Root Feeder. Includes: 1/4” thick heavy duty kick plate, 8” probe and
heat treated tip.
Roller Guides
Hannay
Hannay 4 Way Roller Guides
12" Reel = HA-9939-1012
18" Reel = HA-9939-1018
Measuring
Wheel
91-MW2200
GNC Industrial Measuring Wheel. Dual action reset buttons, collapsible to fit
conveniently into free carrying case.
Quick Disconnects
Brass Quick Disconnects. This is the portion that is attached to your hose. 22-QD-12 is for 1/2" Hose 22-QD-1238 is for 3/8" Hose
This is the portion that goes onto your spray gun. The standard size is 1/2" male pipe thread.
22-QD-12MPTPLUG
www.gnci.org
Ref # Item ID Description
1 12-850-01 Mag-1 Series Grip #1
2 12-850-02 Mag-1 O-Ring #2
3 12-850-03 Mag-1 SS Washer #3
4 12-850-04 Mag-1 SS Valve Stem #4
5 12-850-05 Mag-1 Valve Spring #5
6 12-853-06 Mag-1 O-Ring #6
7 12-853-07 Mag-1 SS Whirler #7
8 12-850-08 Mag-1 Adjuster Body (Short) #8
9 12-850-09 Mag-1 Teflon Valve Seat #9
10 12-850-10 Mag-1 Adjuster Nut (Short) #10
11 12-853-11 Mag-1 Nozzle Cap #11
12 12-853-12S Mag-1 S (.3-.5GPM) Nozzle #12
12 12-853-12M Mag-1 Med (.5-2GPM) Nozzle #12
12 12-853-12L Mag-1 Lg (2-5GPM) Nozzle #12
12 12-853-12XL Mag-1 XL (3-7GPM) Nozzle #12
12 12-853-122XL Mag-1 2XL (6-11GPM) Nozzle #12
12 12-853-123XL Mag-1 3XL (8-13GPM) Nozzle #12
12 12-853-
12THREAD
NOZZLE 1/8 IN NPT THREADED
NOZ
13 12-853-13 Mag-1 O-Ring #13
14 12-850-14 Mag-1 Trigger Clip #14
15 12-850-15 Mag-1 Grip Gasket #15
16 12-850-16 Mag-1 3/4 Garden Hose Adpt #16
Ref # Item ID Description
17 12-850-17 Mag-1 Adpt Gasket #17
18 12-850-18 Mag-1 SS Trigger #18
19 12-850-19N Mag-1 Lock Nut #19
20 12-850-20 Mag-1 Bolt #20
21 12-850-19 Mag-1 Nut #21 & #22
22 12-850-19 Mag-1 Nut #21 & #22
23 12-850-23 Mag-1 Gland #23
24 12-853-24 Mag-1 Set Screw #24
Featured Kits
13-852-25 MAG-I ORIGINAL NOZZLE CAP KIT
13-853-50
Mag-1 O-Ring Kit. Includes:
12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket.
13-853-60
Mag-1 Repair Kit. Includes:
12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket,
12-850-09 Teflon Valve Seat.
13-853-75
Mag-1 Rebuild Kit. Includes:
12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket,
12-850-09 Teflon Valve Seat,
12-853-07 Whirler and 12-853-04 Stainless Steel Valve.
Important:
When ordering parts, give PART
NUMBER and PART DESCRIPTION.
Reference Numbers are used only to
point out parts in the drawing and are
NOT to be used as ordering numbers
11-852-00 Mag-1
www.gnci.org
Ref # Item ID Description
3 12-857-03 GUN PART MAG 2000 TRIGGER
LOCK
4 12-857-04 GUN PART MAG 2000 TRIGGER
5 12-857-05 GUN PART MAG 2000 PIN
6 12-857-06 GUN PART SPRING FOR MAG 2000
7 12-857-07 GUN PART MAG 2000 VALVE TIP
8 12-857-08 GUN PART MAG 2000 WASHER
9 12-857-09 GUN PART MAG 2000 VALVE STEM
10 12-857-10 GUN PART MAG 2000 BUSHING
11 12-857-11 GUN PART MAG 2000 O-RING
12 12-857-12 GUN PART MAG 2000 O-RING
13 12-857-13 GUN PART MAG 2000 SCREW
14 12-857-14 GUN PART MAG 2000 GAUGE PLUG
15 12-857-15 GNC MAG 2000 NOZZLE # 1 BLUE
16 12-857-16 GNC MAG 2000 NOZZLE #2 YELLOW
17 12-857-17 GNC MAG 2000 NOZZLE # 3 GREEN
Important:
When ordering parts, give PART
NUMBER and PART DESCRIPTION.
Reference Numbers are used only to
point out parts in the drawing and are
NOT to be used as ordering numbers
Featured Kits
13-857-50
GNC MAG 2000 REPAIR KIT
Includes: 12-857-07 Valve, 12-857-08 Washer,
13-857-09 Valve Pin, 12-857-10 Nut,
12-857-11 O-Ring and 12-857-12 O-Ring
13-857-75
GNC MAG 2000 REBUILD KIT
Includes: 12-857-03 Handle A, 12-857-04
Handle B, 12-857-06 Spring, 12-857-
07 Valve, 12-857-09 Valve Pin, 12-857-10 Nut, 12-857-11 O-Ring and
12-857-12 O-Ring
11-857-00 Mag-2000
www.gnci.org
Important:
When ordering parts, give PART
NUMBER and PART DESCRIPTION.
Reference Numbers are used only to
point out parts in the drawing and are
NOT to be used as ordering numbers
Ref # Item ID Description
1 12-850-01 Mag-1 Series Grip #1
2 12-850-02 Mag-1 O-Ring #2
3 12-850-03 Mag-1 SS Washer #3
4 12-850-04 Mag-1 SS Valve Stem #4
5 12-850-05 Mag-1 Valve Spring #5
6 12-853-06 Mag-1 O-Ring #6
7 12-853-07 Mag-1 SS Whirler #7
8 12-855-08 Mag-1 Adj Body (Multi-Noz) #8
9 12-850-09 Mag-1 Teflon Valve Seat #9
10 12-855-10 Mag-1 Adj Nut (Multi-Noz) #10
11 12-855-11 Mag-1 Nozzle Cap #11
12 12-853-12S Mag-1 S (.3-.5GPM) Nozzle #12
12 12-853-12M Mag-1 Med (.5-2GPM) Nozzle #12
12 12-853-12L Mag-1 Lg (2-5GPM) Nozzle #12
12 12-853-12XL Mag-1 XL (3-7GPM) Nozzle #12
12 12-853-122XL Mag-1 2XL (6-11GPM) Nozzle #12
12 12-853-123XL Mag-1 3XL (8-13GPM) Nozzle #12
12 12-853-
12THREAD
NOZZLE 1/8 IN NPT THREADED
NOZ
13 12-853-13 Mag-1 O-Ring #13
14 12-850-14 Mag-1 Trigger Clip #14
15 12-850-15 Mag-1 Grip Gasket #15
16 12-850-16 Mag-1 3/4 Garden Hose Adpt #16
17 12-850-17 Mag-1 Adpt Gasket #17
Ref # Item ID Description
18 12-850-18 Mag-1 SS Trigger #18
19 12-850-19N Mag-1 Lock Nut #19
20 12-850-20 Mag-1 Bolt #20
21 12-850-19 Mag-1 Nut #21 & #22
22 12-850-19 Mag-1 Nut #21 & #22
23 12-850-23 Mag-1 Gland #23
24 12-853-24 Mag-1 Set Screw #24
25 12-855-25 Mag-1 Nozzle Spacer #25
Featured Kits
13-855-25 DO-ALL NOZZLE CAP KIT
13-853-50
Mag-1 O-Ring Kit. Includes:
12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket.
13-853-60
Mag-1 Repair Kit. Includes:
12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket,
12-850-09 Teflon Valve Seat.
13-853-75
Mag-1 Rebuild Kit. Includes:
12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket,
12-850-09 Teflon Valve Seat,
12-853-07 Whirler and 12-853-04 Stainless Steel Valve.
11-855-00 Mag-1 Do-All
www.gnci.org
Part # Description/Hole Diameter GPM @
200 PSI
GPM @
300 PSI
GPM @
400 PSI
GPM @
500 PSI
GPM @
600 PSI
GPM @
800 PSI
12-854-42 #5 Disc/ .078” 1.7 2.0 2.4 2.7 2.9 3.4
12-854-43 #6 Disc/ .093” 2.4 3.0 3.4 3.8 4.2 4.9
12-854-44 #7 Disc/ .109” 3.3 4.0 4.6 5.0 5.7 6.7
12-854-45 #8 Disc/ .125” 4.2 5.2 6.0 6.6 7.4 8.5
12-854-46 #10 Disc/ .156” 6.5 8.1 9.2 10.3 11.4 13.0
12-854-47 #12 Disc/ .187 9.8 12.0 13.9 15.5 17.0 19.9
12-854-48 #14 Disc/ .218 14.9 18.2 21.1 23.5 25.8 29.6
12-854-49 #16 Disc/ .250 18.8 23.0 26.5 29.6 32.5 37.1 22
Important:
When ordering parts, give PART
NUMBER and PART DESCRIPTION.
Reference Numbers are used only to
point out parts in the drawing and are
NOT to be used as ordering numbers
11-854-00 Mighty Mag
www.gnci.org
11-854-00 Mighty Mag Con’t
Ref # Item ID Description
1 12-850-01 Mag-1 Series Grip #1
2 12-850-02 Mag-1 O-Ring #2
3 12-850-03 Mag-1 SS Washer #3
4 12-850-04 Mag-1 SS Valve Stem #4
5 12-850-05 Mag-1 Valve Spring #5
9 12-850-09 Mag-1 Teflon Valve Seat #9
14 12-850-14 Mag-1 Trigger Clip #14
15 12-850-15 Mag-1 Grip Gasket #15
16 12-850-16 Mag-1 3/4 Garden Hose Adpt #16
17 12-850-17 Mag-1 Adpt Gasket #17
18 12-850-18 Mag-1 SS Trigger #18
19 12-850-19N Mag-1 Lock Nut #19
20 12-850-20 Mag-1 Bolt #20
21 12-850-19 Mag-1 Nut #21 & #22
22 12-850-19 Mag-1 Nut #21 & #22
23 12-850-23 Mag-1 Gland #23
25 12-854-25 Mighty Mag Barrel #25
26 12-854-26 Mighty Mag Cam Barrel #26
27 12-854-27 Mighty Mag Cam Nut #27
28 12-854-28 Mighty Mag Collar #28
29 12-854-29 Mighty Mag Set Screw #29
30 12-854-30 Mighty Mag Body #30
31 12-854-31 Mighty Mag Hex Nut #31
32 12-854-32 Mighty Mag Packing Nut #32
33 12-854-33 Mighty Mag Packing #33
34 12-854-34 GNC MIGHTY MAG VALVE STEM
35 12-854-35 Mighty Mag O-Ring #35
36 12-854-36 Mighty Mag Outer Tube #36
38 12-854-38 Mighty Mag Straightener #38
39 12-854-39 Mighty Mag Whirler #39
40 12-854-40 Mighty Mag Nozzle Vlv Body #40
41 12-854-41 Mighty Mag Gasket #41
42 12-854-42 Mighty Mag Disc #5 Ref #42
43 12-854-43 Mighty Mag Disc #6 Ref #43
44 12-854-44 Mighty Mag Disc #7 Ref #44
45 12-854-45 Mighty Mag Disc #8 Ref #45
46 12-854-46 Mighty Mag Disc #10 Ref #46
47 12-854-47 Mighty Mag Disc #12 Ref #47
48 12-854-48 Mighty Mag Disc #14 Ref #48
49 12-854-49 Mighty Mag Disc #16 Ref #49
50 12-854-50 Mighty Mag Nozzle Cap #50
Featured Kits
13-853-50
Mag-1 O-Ring Kit. Includes:
12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket.
13-853-60
Mag-1 Repair Kit. Includes:
12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket,
12-850-09 Teflon Valve Seat.
13-853-75
Mag-1 Rebuild Kit. Includes:
12-850-02 Gasket, 12-853-13 O-Ring, and 12-850-06 Gasket,
12-850-09 Teflon Valve Seat,
12-853-07 Whirler and 12-853-04 Stainless Steel Valve.
www.gnci.org
Fittings
Part Number Description– MNPT X HB Straight
3A1412 1/4" MNPT X 1/2" Hose Barb
3A38 3/8" MPT X 3/8" Hose Barb
3A1238 1/2" MPT X 3/8" Hose Barb
3A12 1/2" MNPT X 1/2" Hose Barb
3A3412 3/4" MPT X 1/2" Hose Barb
3A34 3/4" MPT X 3/4" Hose Barb
3A34100 3/4" MPT X 1" Hose Barb
3A100 1" MPT X 1" Hose Barb
3A10034 1" MPT X 3/4" Hose Barb
3A114 1-1/4" MPT X 1" Hose Barb
Part Number Description– MGHT X HB Straight
3D3438 3/4" MGHT X 3/8" Hose Barb
3D3412 3/4" MGHT X 1/2" Hose Barb
Part Number Description—FNPT X HB Straight
3AF1238 1/2" FNPT X 3/8 Hose Barb
3AF3412 3/4" FNPT X 1/2 Hose Barb
Part Number Description- NMNPT Hex Plug
3F38 3/8" MNPT Hex Plug
3F12 1/2" MNPT Hex Plug
3F34 3/4" MNPT Hex Plug
3F100 1" MNPT Hex Plug
3F114 1-1/4" MNPT Hex Plug
3F11 1-1/2" MNPT Hex Plug
Part Number Description- MNPT X HB Elbow
3EL14 1/4" MPT X 1/4" Hose Barb
3EL1438 1/4" MPT X 3/8" Hose Barb
3EL38 3/8" MPT X 3/8" Hose Barb
3EL3812 3/8" MPT X 1/2" Hose Barb
3EL1238 1/2" MPT X 3/8" Hose Barb
3EL12 1/2" MNPT X 1/2" Hose Barb
3EL1234 1/2" MPT X 3/4" Hose Barb
3EL3438 3/4" MPT X 3/8" Hose Barb
3EL3412 3/4" MPT X 1/2" Hose Barb
3EL3458 3/4" MPT X 5/8" Hose Barb
3EL34 3/4" MPT X 3/4" Hose Barb
3EL34100 3/4" MPT X 1 Hose Barb
3EL100 1" MPT X 1" Hose Barb
3EL114 1-1/4" MPT X 1-1/4" Hose Barb
3EL112 1-1/2" MPT X 1-1/2" Hose Barb
3EL200 2" MPT X 2" Hose Barb
Part Number Description– FNPT X MNPT Street Elbow
3SE14 1/4" FNPT X 1/4" MNPT
3SE12 1/2" FNPT X 1/2" MNPT
3SE34 3/4" FNPT X 3/4" MNPT
3SE100 1" FNPT X 1" MNPT
3SE114 1-1/4" FNPT X 1-1/4" MNPT
Part Number Description– MNPT X MNPT Nipple
3M1238 1/2" MNPT X 3/8" MNPT
3M12 1/2" MNPT X 1/2" MNPT
3M34 3/4" MNPT X 3/4" MNPT
3M100 1" MNPT X 1" MNPT
3M114 1-1/4" MNPT X 1-1/4"
Part Number Description– MNPT X FNPT Reducer
3RB3414 3/4" MNPT X 1/4" FNPT
3RB3412 3/4" MNPT X 1/2 FNPT
3RB10012 1" MNPT X 1/2" FNPT
3RB10034 1" MNPT X 3/4" FNPT
Part Number Description– HB Tee
3T38 3/8" Hose Barb
3T12 1/2" Hose Barb
3T34 3/4" Hose Barb
Part Number Description– FNPT Threaded Tee
3TT12 1/2" FNPT
3TT34 3/4" FNPT
3TT100 1" FNPT
3TT114 1-1/4" FNPT
Part Number Description– FNPT Threaded Elbow
3LL12 1/2" FNPT X 1/2" FNPT
3LL34 3/4" FNPT X 3/4" FNPT
3LL100 1" FNPT X 1" FNPT
3LL114 1-1/4" FNPT X 1-1/4" FNPT
Polypropylene fittings are used for their resistance to acidic chemicals, as well as sunlight/UV exposure. They are often preferred for their black color to cre-ate a clean look throughout the sprayer.
www.gnci.org
Accessories
Poly Ball Valves 2 & 3 Way
Fiberglass-reinforced polypropylene body for strength and chemical resistance
Teflon seats for smooth operation and proper seal-ing characteristics
EPDM O-rings to handle most fertilizers and chemi-cals
Max. operating pressure for sizes up to 1-1⁄4" – 232 PSI (16 bar). For 1-1⁄2" and 2" – 145 PSI (10 bar).
Part No Description - 2 Way Valves
BV-2-050P 1/2" NPT 2 Way Ball Valve
BV-2-075P 3/4" NPT 2 Way Ball Valve
BV-2-100P 1" NPT 2 Way Ball Valve,
BV-2-125P 1-1/4" NPT 2 Way Ball Valve
BV-2-150P 1-1/2" NPT 2 Way Ball Valve
Part No Description - 3 Way Valves
BV-3-050P 1/2" NPT 3 Way Ball Valve, Poly
BV-3-075P 3/4" NPT 3 Way Ball Valve, Poly
BV-3-100P 1" NPT 3 Way Ball Valve, Poly
BV-3-125P 1-1/4" NPT 3 Way Ball Valve, Poly
BV-3-150P 1-1/2" NPT 3 Way Ball Valve, Poly
Mini Chrome-2 Way Valves
200 PSI rating (CWP)
-4(deg) – 250(deg) F temperature rating
Chromed brass body, ball and stem
Teflon® seat and Viton® seals
Part No Description - Male X Female
BV-2-018BMF 1/8" FNPT X 1/8" MNPT 2 Way
BV-VA-2-014BMF 1/4" FNPT X 1/4" MNPT 2 Way
BV-VA-2-038BMF 3/8" FNPT X 3/8" MNPT 2 Way
BV-VA-2-012BMF 1/2" FNPT X 1/2" MNPT 2 Way
Part No Description - Female X Female
BV-2-018BFF 1/8" FNPT X 1/8" FNPT 2 Way
BV-2-014BFF 1/4" FNPT X 1/4" FNPT 2 Way
BV-2-038BFF 3/8" FNPT X 3/8" FNPT 2 Way
BV-2-012BFF 1/2" FNPT X 1/2" FNPT 2 Way
www.gnci.org
Accessories
Part No Description—Complete Filter
LS-075-20C 3/4” Clear Bowl Suction Filter, 20 Mesh
LS-100-20C 1” Clear Bowl Suction Filter, 20 Mesh
Part No. Description—Components
LS-100-020CO Replacement O-Ring Will Fit Both 3/4” & 1”
LS-100-020CS Replacement Screen 20 Mesh Will Fit Both 3/4” & 1”
Part No Description—Complete Filter
LS-100-20 1” “Y” Banjo Filter
LS-125-20 1-1/4” “Y” Banjo Filter
Part No. Description—Components
LS-125-G Replacement O-Ring Will Fit Both 1” & 1-1/4”
LS-120 Replacement Screen 20 Mesh Will Fit Both 1” & 1-1/4”
Part No Description—Complete Filter
JB-AK1323W John Blue 12 Volt Pump Replacement Filter
SH-255-223 Shurflo 12 Volt Pump Replacement Filter 1/2” Hose Barb Inlet, 1/2” NPSM Female
Part No Description—Complete Filter
42-950-200 0-200 PSI Liquid Filled Pressure Gauge 1/4” Bottom Mount
42-950-600 0-600 PSI Liquid Filled Pressure Gauge 1/4” Bottom Mount
42-950-1000 0-1000 PSI Liquid Filled Pressure Gauge 1/4” Bottom Mount
Part No Description
HY-3371 1/2" FNPT X 3/4" MNPT Outlet, Pump Output 10 GPM or Less (Pictured Left)
HY-3371-0028 3/4" MNPT X 3/4" MNPT Outlet, Pump Output 15-20 GPM (Pictured Right)
Agitators
www.gnci.org
Tank Lids & Baskets
Part Number Description
LD-BSK-0850 8" Tank Basket 8 OD X I.D. X 4.7" Deep, 18 Mesh
LD-BSK-1295 12" Tank Basket 12 OD X 11.3 I.D. X 9.4 Deep, 18 Mesh
LD-BSK-1670 16" Tank Basket 16 OD X I.D. X 7.1 Deep, 18 Mesh
Baskets
Size Lid P/N Basket P/N Style Description Fit Tank MFG
5” LD-05-63484 N/A 5” Lid Female
Threads
Fits Norwesco 15-25 Gallon
Tanks MFG after 2/1/00
6” LD-06-343047 N/A 6” Lid Female
Threads
Fits Snyder 15-50 Gallon
Tanks
8” LD-08-352221 LD-BSK-0850
8” Lid W/Rim Kit GNC Mfg Split Space Saver
prior to 2012
8” LD-08-63480 LD-BSK-0850
8” Lid Male Treads
Blue Center Vent
8" Polypropylene lid with
blue snap-in vent for select
Norwesco tanks manufac-
tured after 2/2/08
10” LD-10-67399 N/A
10” Lid Male
Threads
Norwesco Tank Lid Re-
placed 67105
W/Fillwell NO-10-67398
10” LD-10-343080 N/A
10” Lid Male Threads Fits Snyder 100-200 Gallon
PCO Tanks
12” LD-12-356241 LD-BSK-1295
Hinged Locking
GNC Mfg Tanks 075-100
Gallon Space Saver, GNC
050 Gallon Tanks Prior to
2015
16” LD-16-356061 LD-BSK-1670
16” Hinged Locking
GNC 200—400 Gallon
Space Saver, Most 300 &
500 Gallon Leg Tanks & All
Fiberglass
16” LD-16-60011 LD-BSK-1670
16" Norwesco Lid W/4" Center Lid/Air Vent
16” Norwesco Tank lid,
used on various Norwesco
tanks.
16” LD-16-63485 LD-BSK-1670
16" Norwesco Lid W/ Blue Snap-In Vent
16” Norwesco Tank lid,
used on various Norwesco
tanks.
www.gnci.org
Accessories
Part No Description - Bulk Head Fitting *POLY*
FT-BHF-012P 1/2" Bulk Head Fitting, EPDM Gasket, Opening 1-3/4", Poly Fitting
FT-BHF-034P 3/4" Bulk Head Fitting, EPDM Gasket, Opening 1-3/4", Poly Fitting
FT-BHF-100P 1" Bulk Head Fitting, EPDM Gasket, Opening 2-1/8", Poly Fitting
FT-BHF-114P 1-1/4" Bulk Head Fitting, EPDM Gasket, Opening 2-5/8", Poly Fitting
FT-BHF-112P 1-1/2" Bulk Head Fitting, EPDM Gasket, Opening 2-5/8", Poly Fitting
FT-BHF-200P 2" Bulk Head Fitting, EPDM Gasket, Opening 3-1/4", Poly Fitting
Bulkhead Fitting Bulkhead Tank Fittings are specifically designed for use in IBC (Intermediate Bulk Con-tainer) / Tank applications. Bulkhead Tank Fittings are available in glass injected poly-propylene and stainless steel materials
Part No Description— Gasket
FT-BHF-12/34G Gasket Only Fits 1/2" & 3/4" Bulk Head Poly Fittings
FT-BHF-100G Gasket Only Fits 1" Bulk Head Poly Fittings
FT-BHF114/112G Gasket Only Fits 1-1/4" & 1-1/2" Bulk Head Poly Fittings
Size Part Number A B C LID Description Lid
100 31-FIB-100 33” 38” 25” 16” 100 Gallon Fiberglass LD-12-356241
200 31-FIB-200 61” 40” 25” 16” 200 Gallon Fiberglass LD-12-356241
300 31-FIB-300 61” 40” 32.5” 16” 300 Gallon Fiberglass LD-16-356061
600 31-FIB-600 96” 46” 46.5” 16” 600 Gallon Fiberglass LD-16-356061
300 31-FIB-200/100 61” 40” 32.5” 16” 200/100 Split Fiberglass LD-16-356061
600 31-FIB-400/200 96” 46” 46.5” 16” 400/200 Split Fiberglass LD-16-356061
B
C
A
www.gnci.org
Size Part Number A B C D Description Lid
075 31-GTR-075 60” 39” 48” 14” 075 Gallon Space Saver LD-12-356241
100 31-GTR-100 60” 39” 48” 16” 100 Gallon Space Saver LD-12-356241
200 31-GTR-200 70” 39” 48” 28” 200 Gallon Space Saver LD-16-356061
300 31-GTR-300 70” 39” 48” 36” 300 Gallon Space Saver LD-16-356061
400 31-GTR-400 70” 39” 48” 36” 400 Gallon Space Saver LD-16-356061
C
B
D
Size Part Number A B C D Description Lid
100/100 34-SS-200G-10GPM-A 60” 41” 48” 30” 100/100G Split Space Saver LD-12-356241
100/200 34-SS-300G-10GPM-B 60” 57” 48” 30” 100/200G Split Space Saver LD-12-356241
200/200 34-SS-400G-10GPM-C 60” 74” 48” 30” 200/200G Split Space Saver LD-12-356241
100 31-GTS-100 60” 22” 48” 30” 100G Split Single Tank SpSav LD-12-356241
200 31-GTS-200 60” 38” 48” 30” 200G Split Single Tank SpSav LD-12-356241
A B B B
D
C
Space Saver Style Tanks
A
GNC Poly Tanks are a multi-purpose tank. They are well suited for nursery, pest control, agricultural and lawn care applications. These tanks feature rotational molding and do not require any saddles or steel supports. GNC tanks must be securely anchored for use in transportable applications. Flat spots are molded into both ends to provide mounting areas for agitation equipment. The tanks come without fittings installed.
www.gnci.org
Size Part Number W L H Lid Description Lid
100 NO-100-42835 30” 38” 30” 8” 100 Gallon PCO/Loaf LD-08-356241
150 NO-150-42836 37” 48” 29” 16” 150 Gallon PCO/Loaf LD-16-63485
200 NO-200-42837 37” 48” 37” 16” 200 Gallon PCO/Loaf LD-16-63485
Size Part Number W L H Lid Description Lid
325 NO-325-40217 38” 68” 48” 16” 325 Gallon Poly Leg LD-16-63485
325 NO-325Band-604778 N/A N/A N/A N/A 325 Tank Bands (2 Required) N/A
500 NO-500-47256 48” 75” 51” 16” 500 Gallon Poly Leg LD-16-63485
500 NO-500Band-67101 N/A N/A N/A N/A 500 Tank Bands (2 Required) N/A
Poly Tanks
PCO Tanks are a multi-purpose tank. PCO tanks are well suited for nursery, pest control, agricultural and lawn care applications. These tanks feature self-supporting legs and do not require any saddles or steel supports. PCO tanks must be securely anchored for use in transportable applications. Flat spots are molded into both ends to provide mounting areas for agitation equipment. The tanks come without fittings installed.
This elliptical tank style is designed to provide the greatest ca-pacity with the lowest center of gravity, making it the best de-sign available for transporting larger volumes. Norwesco ellipti-cal tanks feature molded-in legs that act as "baffles" to reduce sloshing and provide increased stability during transport. All Norwesco elliptical leg tanks require full length bottom sup-port as well as support bands. The 1600 flat bottom requires full length support but does not require bands.
Size Part Number W L H Lid Description Lid
025 31-GPC-025 19” 38” 10” 8” 025 Gallon PCO/Loaf LD-08-352221
050 31-GPC-050 19” 38” 18” 8” 050 Gallon PCO/Loaf LD-08-352221