PRODUCT INFORMATION

Silica Dry Industrial Sand Plant: Thompson, OH

R.W. Sidley’s operates a state of the art processing plant that produces the highest quality products virtually free of deleterious materials. Our processed silica sand is from our Thompson mine part of the Sharon conglomerate formation. All silica sands are washed, dried and screened at the Thompson plant.

Available packaging: 50 lb. bags, 3,000 lb. super sacks, 4,000 lb. super sacks and bulk quantities.

R.W. Sidley, Inc. | 7123 Madison Road | Thompson, OH 44086 | 440.298.3232 p | 440.298.1369 f | www.rwsidley.com

Rev

ised

: 06

.07

.16

Testing: Results are typical for the product. T= Trace amounts.

Laboratory Sieve Analysis: Testing was conducted at R.W. Sidley, Inc., Thompson, OH

Tests performed in accordance with ASTM D-75, ASTM C-136, and AASHTO T-176

Chemical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Physical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Tests Results/Units

SiO2 99.3%

Fe2O3 0.38%

AI2O3 0.21%

K2O 0.054%

TiO2 0.025%

Na2O 0.005%

Total Mg 0.004%

Total Ca 0.003%

Ni <0.001%

Mn 0.001%

Cr2O3 <0.001%

CHEMICAL ANALYSIS

Silica

Percent Loss, Acid Solubility (ASTM D3042) 0.4%

Moh's Hardness 7

Loss on Ignition 0.14%

pH 6.4

Specific Gravity 2.63-2.65

Absorption 0.31%

PHYSICAL ANALYSIS

Product 4X10 6X12 10X20 12X20 16X35 16X50 20X70 30X100 50X270

Mesh Size

1/4 T

4 10.1% T

6 65.1% 3.6%

8 23.1% 34.5% T

10 0.6% 29.6% 3.8% T

12 0.2% 25.1% 12.5% 6.8%

14 T 6.5% 21.3% 41.4%

16 0.3% 20.3% 35.8%

18 0.1% 24.7% 14.1% T T

20 T 14.3% 1.3% 22.2% 0.5%

25 2.4% T 49.2% 17.5%

30 T 23.7% 34.9% T

35 4.1% 38.2% 6.6% T

40 T 7.2% 43.1% 3.1%

50 1.5% 46.0% 47.0% T

70 T 4.2% 45.7% 38.4%

100 T 3.6% 48.4%

140 T 9.4%

200 2.0%

270 T

Pan 0.2% 0.1% 0.0% 0.0% 0.1% 0.1% 1.3%

LABORATORY SIEVE ANALYSIS

% Retained

PRODUCT INFORMATION

Silica Dry Industrial Sand Product: 4X10 Plant: Thompson, OH

R.W. Sidley, Inc. | 7123 Madison Road | Thompson, OH 44086 | 440.298.3232 p | 440.298.1369 f | www.rwsidley.com

Rev

ised

: 06

.07

.16

R.W. Sidley’s operates a state of the art processing plant that produces the highest quality products virtually free of deleterious materials. Our processed silica sand is from our Thompson mine part of the Sharon conglomerate formation. All silica sands are washed, dried and screened at the Thompson plant.

Available packaging: 50 lb. bags, 3,000 lb. super sacks, 4,000 lb. super sacks and bulk quantities.

Silica

Percent Loss, Acid Solubility (ASTM D3042) 0.4%

Moh's Hardness 7

Loss on Ignition 0.14%

pH 6.4

Specific Gravity 2.63-2.65

Absorption 0.31%

PHYSICAL ANALYSIS

Tests Results/Units

SiO2 99.3%

Fe2O3 0.38%

AI2O3 0.21%

K2O 0.054%

TiO2 0.025%

Na2O 0.005%

Total Mg 0.004%

Total Ca 0.003%

Ni <0.001%

Mn 0.001%

Cr2O3 <0.001%

CHEMICAL ANALYSIS

Testing: Results are typical for the product. T= Trace amounts.

Laboratory Sieve Analysis: Testing was conducted at R.W. Sidley, Inc., Thompson, OH Tests performed in accordance with ASTM D-75,

ASTM C-136, and AASHTO T-176

Chemical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Physical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Product

Mesh Size% Retained

Cumulative %

Retained

Cumulative %

Passing

1/4 T T T

4 10.1% 10.7% 89.3%

6 65.1% 75.8% 24.2%

8 23.1% 98.9% 1.1%

10 0.6% 99.5% 0.5%

12 0.2% 99.7% 0.3%

14 T T T

16

18

20

25

30

35

40

50

70

100

140

200

270

Pan 0.2% 100.0% 0.0%

LABORATORY SIEVE ANALYSIS4X10

PRODUCT INFORMATION

Silica Dry Industrial Sand Product: 6X12 Plant: Thompson, OH

R.W. Sidley, Inc. | 7123 Madison Road | Thompson, OH 44086 | 440.298.3232 p | 440.298.1369 f | www.rwsidley.com

Rev

ised

: 06

.07

.16

R.W. Sidley’s operates a state of the art processing plant that produces the highest quality products virtually free of deleterious materials. Our processed silica sand is from our Thompson mine part of the Sharon conglomerate formation. All silica sands are washed, dried and screened at the Thompson plant.

Available packaging: 50 lb. bags, 3,000 lb. super sacks, 4,000 lb. super sacks and bulk quantities.

Silica

Percent Loss, Acid Solubility (ASTM D3042) 0.4%

Moh's Hardness 7

Loss on Ignition 0.14%

pH 6.4

Specific Gravity 2.63-2.65

Absorption 0.31%

PHYSICAL ANALYSIS

Tests Results/Units

SiO2 99.3%

Fe2O3 0.38%

AI2O3 0.21%

K2O 0.054%

TiO2 0.025%

Na2O 0.005%

Total Mg 0.004%

Total Ca 0.003%

Ni <0.001%

Mn 0.001%

Cr2O3 <0.001%

CHEMICAL ANALYSIS

Testing: Results are typical for the product. T= Trace amounts.

Laboratory Sieve Analysis: Testing was conducted at R.W. Sidley, Inc., Thompson, OH Tests performed in accordance with ASTM D-75,

ASTM C-136, and AASHTO T-176

Chemical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Physical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Product

Mesh Size% Retained

Cumulative %

Retained

Cumulative %

Passing

4 T T T

6 3.6% 3.7% 96.3%

8 34.5% 38.2% 61.8%

10 29.6% 67.7% 32.3%

12 25.1% 92.9% 7.1%

14 6.5% 99.4% 0.6%

16 0.3% 99.7% 0.3%

18 0.1% 99.8% 0.2%

20 T T T

25

30

35

40

50

70

100

140

200

270

Pan 0.1% 100.0% 0.0%

LABORATORY SIEVE ANALYSIS6X12

PRODUCT INFORMATION

Silica Dry Industrial Sand Product: 10X20 Plant: Thompson, OH

R.W. Sidley, Inc. | 7123 Madison Road | Thompson, OH 44086 | 440.298.3232 p | 440.298.1369 f | www.rwsidley.com

Rev

ised

: 06

.07

.16

R.W. Sidley’s operates a state of the art processing plant that produces the highest quality products virtually free of deleterious materials. Our processed silica sand is from our Thompson mine part of the Sharon conglomerate formation. All silica sands are washed, dried and screened at the Thompson plant.

Available packaging: 50 lb. bags, 3,000 lb. super sacks, 4,000 lb. super sacks and bulk quantities.

Silica

Percent Loss, Acid Solubility (ASTM D3042) 0.4%

Moh's Hardness 7

Loss on Ignition 0.14%

pH 6.4

Specific Gravity 2.63-2.65

Absorption 0.31%

PHYSICAL ANALYSIS

Tests Results/Units

SiO2 99.3%

Fe2O3 0.38%

AI2O3 0.21%

K2O 0.054%

TiO2 0.025%

Na2O 0.005%

Total Mg 0.004%

Total Ca 0.003%

Ni <0.001%

Mn 0.001%

Cr2O3 <0.001%

CHEMICAL ANALYSIS

Testing: Results are typical for the product. T= Trace amounts.

Laboratory Sieve Analysis: Testing was conducted at R.W. Sidley, Inc., Thompson, OH Tests performed in accordance with ASTM D-75,

ASTM C-136, and AASHTO T-176

Chemical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Physical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Product

Mesh Size% Retained

Cumulative %

Retained

Cumulative %

Passing

4

6

8 T T T

10 3.8% 4.0% 96.0%

12 12.5% 16.5% 83.5%

14 21.3% 37.8% 62.2%

16 20.3% 58.1% 41.9%

18 24.7% 82.8% 17.2%

20 14.3% 97.1% 2.9%

25 2.4% 99.5% 0.5%

30 T T T

35

40

50

70

100

140

200

270

Pan 0.0% 100.0% 0.0%

LABORATORY SIEVE ANALYSIS10X20

PRODUCT INFORMATION

Silica Dry Industrial Sand Product: 12X20 Plant: Thompson, OH

R.W. Sidley, Inc. | 7123 Madison Road | Thompson, OH 44086 | 440.298.3232 p | 440.298.1369 f | www.rwsidley.com

Rev

ised

: 06

.07

.16

R.W. Sidley’s operates a state of the art processing plant that produces the highest quality products virtually free of deleterious materials. Our processed silica sand is from our Thompson mine part of the Sharon conglomerate formation. All silica sands are washed, dried and screened at the Thompson plant.

Available packaging: 50 lb. bags, 3,000 lb. super sacks, 4,000 lb. super sacks and bulk quantities.

Silica

Percent Loss, Acid Solubility (ASTM D3042) 0.4%

Moh's Hardness 7

Loss on Ignition 0.14%

pH 6.4

Specific Gravity 2.63-2.65

Absorption 0.31%

PHYSICAL ANALYSIS

Tests Results/Units

SiO2 99.3%

Fe2O3 0.38%

AI2O3 0.21%

K2O 0.054%

TiO2 0.025%

Na2O 0.005%

Total Mg 0.004%

Total Ca 0.003%

Ni <0.001%

Mn 0.001%

Cr2O3 <0.001%

CHEMICAL ANALYSIS

Testing: Results are typical for the product. T= Trace amounts.

Laboratory Sieve Analysis: Testing was conducted at R.W. Sidley, Inc., Thompson, OH Tests performed in accordance with ASTM D-75,

ASTM C-136, and AASHTO T-176

Chemical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Physical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Product

Mesh Size% Retained

Cumulative %

Retained

Cumulative %

Passing

4

6

8

10 T T T

12 6.8% 7.2% 92.8%

14 41.4% 48.6% 51.4%

16 35.8% 84.4% 15.6%

18 14.1% 98.5% 1.5%

20 1.3% 99.9% 0.1%

25 T T T

30

35

40

50

70

100

140

200

270

Pan 0.0% 100.0% 0.0%

LABORATORY SIEVE ANALYSIS12X20

PRODUCT INFORMATION

Silica Dry Industrial Sand Product: 16X35 Plant: Thompson, OH

R.W. Sidley, Inc. | 7123 Madison Road | Thompson, OH 44086 | 440.298.3232 p | 440.298.1369 f | www.rwsidley.com

Rev

ised

: 06

.07

.16

R.W. Sidley’s operates a state of the art processing plant that produces the highest quality products virtually free of deleterious materials. Our processed silica sand is from our Thompson mine part of the Sharon conglomerate formation. All silica sands are washed, dried and screened at the Thompson plant.

Available packaging: 50 lb. bags, 3,000 lb. super sacks, 4,000 lb. super sacks and bulk quantities.

Silica

Percent Loss, Acid Solubility (ASTM D3042) 0.4%

Moh's Hardness 7

Loss on Ignition 0.14%

pH 6.4

Specific Gravity 2.63-2.65

Absorption 0.31%

PHYSICAL ANALYSIS

Tests Results/Units

SiO2 99.3%

Fe2O3 0.38%

AI2O3 0.21%

K2O 0.054%

TiO2 0.025%

Na2O 0.005%

Total Mg 0.004%

Total Ca 0.003%

Ni <0.001%

Mn 0.001%

Cr2O3 <0.001%

CHEMICAL ANALYSIS

Testing: Results are typical for the product. T= Trace amounts.

Laboratory Sieve Analysis: Testing was conducted at R.W. Sidley, Inc., Thompson, OH Tests performed in accordance with ASTM D-75,

ASTM C-136, and AASHTO T-176

Chemical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Physical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Product

Mesh Size% Retained

Cumulative %

Retained

Cumulative %

Passing

4

6

8

10

12

14

16

18 T T T

20 22.2% 22.8% 77.2%

25 49.2% 72.0% 28.0%

30 23.7% 95.7% 4.3%

35 4.1% 99.8% 0.2%

40 T T T

50

70

100

140

200

270

Pan 0.0% 100.0% 0.0%

16X35

LABORATORY SIEVE ANALYSIS

PRODUCT INFORMATION

Silica Dry Industrial Sand Product: 16X50 Plant: Thompson, OH

R.W. Sidley, Inc. | 7123 Madison Road | Thompson, OH 44086 | 440.298.3232 p | 440.298.1369 f | www.rwsidley.com

Rev

ised

: 06

.07

.16

R.W. Sidley’s operates a state of the art processing plant that produces the highest quality products virtually free of deleterious materials. Our processed silica sand is from our Thompson mine part of the Sharon conglomerate formation. All silica sands are washed, dried and screened at the Thompson plant.

Available packaging: 50 lb. bags, 3,000 lb. super sacks, 4,000 lb. super sacks and bulk quantities.

Silica

Percent Loss, Acid Solubility (ASTM D3042) 0.4%

Moh's Hardness 7

Loss on Ignition 0.14%

pH 6.4

Specific Gravity 2.63-2.65

Absorption 0.31%

PHYSICAL ANALYSIS

Tests Results/Units

SiO2 99.3%

Fe2O3 0.38%

AI2O3 0.21%

K2O 0.054%

TiO2 0.025%

Na2O 0.005%

Total Mg 0.004%

Total Ca 0.003%

Ni <0.001%

Mn 0.001%

Cr2O3 <0.001%

CHEMICAL ANALYSIS

Testing: Results are typical for the product. T= Trace amounts.

Laboratory Sieve Analysis: Testing was conducted at R.W. Sidley, Inc., Thompson, OH Tests performed in accordance with ASTM D-75,

ASTM C-136, and AASHTO T-176

Chemical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Physical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Product

Mesh Size% Retained

Cumulative %

Retained

Cumulative %

Passing

4

6

8

10

12

14

16

18 T T T

20 0.5% 0.6% 99.4%

25 17.5% 18.1% 81.9%

30 34.9% 53.0% 47.0%

35 38.2% 91.2% 8.8%

40 7.2% 98.3% 1.7%

50 1.5% 99.9% 0.1%

70 T T T

100

140

200

270

Pan 0.0% 100.0% 0.0%

LABORATORY SIEVE ANALYSIS16X50

PRODUCT INFORMATION

Silica Dry Industrial Sand Product: 20X70 Plant: Thompson, OH

R.W. Sidley, Inc. | 7123 Madison Road | Thompson, OH 44086 | 440.298.3232 p | 440.298.1369 f | www.rwsidley.com

Rev

ised

: 06

.07

.16

R.W. Sidley’s operates a state of the art processing plant that produces the highest quality products virtually free of deleterious materials. Our processed silica sand is from our Thompson mine part of the Sharon conglomerate formation. All silica sands are washed, dried and screened at the Thompson plant.

Available packaging: 50 lb. bags, 3,000 lb. super sacks, 4,000 lb. super sacks and bulk quantities.

Silica

Percent Loss, Acid Solubility (ASTM D3042) 0.4%

Moh's Hardness 7

Loss on Ignition 0.14%

pH 6.4

Specific Gravity 2.63-2.65

Absorption 0.31%

PHYSICAL ANALYSIS

Tests Results/Units

SiO2 99.3%

Fe2O3 0.38%

AI2O3 0.21%

K2O 0.054%

TiO2 0.025%

Na2O 0.005%

Total Mg 0.004%

Total Ca 0.003%

Ni <0.001%

Mn 0.001%

Cr2O3 <0.001%

CHEMICAL ANALYSIS

Testing: Results are typical for the product. T= Trace amounts.

Laboratory Sieve Analysis: Testing was conducted at R.W. Sidley, Inc., Thompson, OH Tests performed in accordance with ASTM D-75,

ASTM C-136, and AASHTO T-176

Chemical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Physical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Product

Mesh Size% Retained

Cumulative %

Retained

Cumulative %

Passing

4

6

8

10

12

14

16

18

20

25

30 T T T

35 6.6% 6.7% 93.3%

40 43.1% 49.7% 50.3%

50 46.0% 95.8% 4.2%

70 4.2% 99.9% 0.1%

100 T T T

140

200

270

Pan 0.1% 100.0% 0.0%

LABORATORY SIEVE ANALYSIS20X70

PRODUCT INFORMATION

Silica Dry Industrial Sand Product: 30X100 Plant: Thompson, OH

R.W. Sidley, Inc. | 7123 Madison Road | Thompson, OH 44086 | 440.298.3232 p | 440.298.1369 f | www.rwsidley.com

Rev

ised

: 06

.07

.16

R.W. Sidley’s operates a state of the art processing plant that produces the highest quality products virtually free of deleterious materials. Our processed silica sand is from our Thompson mine part of the Sharon conglomerate formation. All silica sands are washed, dried and screened at the Thompson plant.

Available packaging: 50 lb. bags, 3,000 lb. super sacks, 4,000 lb. super sacks and bulk quantities.

Silica

Percent Loss, Acid Solubility (ASTM D3042) 0.4%

Moh's Hardness 7

Loss on Ignition 0.14%

pH 6.4

Specific Gravity 2.63-2.65

Absorption 0.31%

PHYSICAL ANALYSIS

Tests Results/Units

SiO2 99.3%

Fe2O3 0.38%

AI2O3 0.21%

K2O 0.054%

TiO2 0.025%

Na2O 0.005%

Total Mg 0.004%

Total Ca 0.003%

Ni <0.001%

Mn 0.001%

Cr2O3 <0.001%

CHEMICAL ANALYSIS

Testing: Results are typical for the product. T= Trace amounts.

Laboratory Sieve Analysis: Testing was conducted at R.W. Sidley, Inc., Thompson, OH Tests performed in accordance with ASTM D-75,

ASTM C-136, and AASHTO T-176

Chemical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Physical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Product

Mesh Size% Retained

Cumulative %

Retained

Cumulative %

Passing

4

6

8

10

12

14

16

18

20

25

30

35 T T T

40 3.1% 3.2% 96.8%

50 47.0% 50.2% 49.8%

70 45.7% 95.9% 4.1%

100 3.6% 99.5% 0.5%

140 T T T

200

270

Pan 0.1% 100.0% 0.0%

LABORATORY SIEVE ANALYSIS30X100

PRODUCT INFORMATION

Silica Dry Industrial Sand Product: 50X270 Plant: Thompson, OH

R.W. Sidley, Inc. | 7123 Madison Road | Thompson, OH 44086 | 440.298.3232 p | 440.298.1369 f | www.rwsidley.com

Rev

ised

: 06

.07

.16

R.W. Sidley’s operates a state of the art processing plant that produces the highest quality products virtually free of deleterious materials. Our processed silica sand is from our Thompson mine part of the Sharon conglomerate formation. All silica sands are washed, dried and screened at the Thompson plant.

Available packaging: 50 lb. bags, 3,000 lb. super sacks, 4,000 lb. super sacks and bulk quantities.

Silica

Percent Loss, Acid Solubility (ASTM D3042) 0.4%

Moh's Hardness 7

Loss on Ignition 0.14%

pH 6.4

Specific Gravity 2.63-2.65

Absorption 0.31%

PHYSICAL ANALYSIS

Tests Results/Units

SiO2 99.3%

Fe2O3 0.38%

AI2O3 0.21%

K2O 0.054%

TiO2 0.025%

Na2O 0.005%

Total Mg 0.004%

Total Ca 0.003%

Ni <0.001%

Mn 0.001%

Cr2O3 <0.001%

CHEMICAL ANALYSIS

Testing: Results are typical for the product. T= Trace amounts.

Laboratory Sieve Analysis: Testing was conducted at R.W. Sidley, Inc., Thompson, OH Tests performed in accordance with ASTM D-75,

ASTM C-136, and AASHTO T-176

Chemical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Physical Analysis: Testing conducted by NSL Analytical, Cleveland, OH

Product

Mesh Size% Retained

Cumulative %

Retained

Cumulative %

Passing

4

6

8

10

12

14

16

18

20

25

30

35

40

50 T T T

70 38.4% 38.8% 61.2%

100 48.4% 87.2% 12.8%

140 9.4% 96.6% 3.4%

200 2.0% 98.6% 1.4%

270 T T T

Pan 1.3% 100.0% 0.0%

LABORATORY SIEVE ANALYSIS50X270